Motorola CDC Driver, v1.96.00
[Part #: TBD]
Contents







Description
Device Compatibility
Release Notes
Components
Installation
Notes
Late Additions
Description
Thank you for selecting Motorola as your mobility solution tool provider.
The Motorola CDC driver is a self contained driver recommended for installation
when a Motorola Scanner must be used in USB CDC host mode
The Motorola CDC driver is an alternative, replacement to the standard Windows
native CDC driver provided with the Windows OS.
The driver conforms to Microsoft’s Windows Driver Model (WDM) and is certified by Windows
Hardware Quality Labs (WHQL) for Windows XP 32-bit and Windows 7 64-bit operating
systems.
For the latest software updates, go to the Support Central web site and select Software
Downloads.
Thank you,
The Motorola Enterprise Mobility Software Development Team
Back to Top
Device Compatibility
Back to Top
The Motorola CDC Driver is compatible with the following Operating Systems:

Windows XP 32-bit

Windows 7 32-bit

Windows 7 64-bit

Coming Soon: Windows 8
Note: An update to the Motorola CDC driver is planned for 2nd quarter 2013. This update (v2.0)
will include support for Windows 8
Listed below are the scanners supporting the USB CDC host:
Scanner
DS3407
DS3408
DS6707
DS6708
DS9808
PL4507
MT20x0
STB2078 (Cradle)
CR0078-P (Cradle)
DS4208
DS9208
LS2208
DS3508
DS3578 w/FIPS
Cradle
DS457
PL4507
PL3307
MS440x
Release Notes
USB CDC Host Support
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Version 1.96.00 (Initial Release)

Standard USB CDC host mode support

Hot plugging of scanner is fully supported. The scanner can
be disconnected from the USB port and then reconnected,
allowing the application to continue to function (assuming the
application has been designed to do so)
Back to Top
Components
N/A
Back to Top
Installation
To begin installation:
1. For Windows XP, download the 32-bit driver. Windows XP 64-bit is not supported at this
time.
2. For Windows 7, download either the 32-bit driver or the 64-bit driver appropriate to your
OS version.
3. Unzip the file and run the InstallShield executable.
4. Click Next when the InstallShield Wizard Welcome screen is displayed:
Figure 1 - Welcome Screen
5. Review the Motorola Solutions, Inc. End User License Agreement and click Yes upon
agreement. You may print the License Agreement for your records.
Figure 2 - End User License Agreement
6. After Clicking Yes, the installation is ready to begin, click Next to begin installation:
Figure 3 - Ready to Install
7. Upon completion, the option to restart will be presented. To ensure all remaining CDC
drivers are removed from memory, a reboot is recommended. You can choose to restart
now or later. If you wish to restart now, leave “Yes” checked and click Finish. The
computer will be restarted automatically; otherwise, select “No” and click Finish and
restart the host manually when ready prior to moving onto the next steps:
Figure 4 - Install Complete
Enabling USB CDC Host mode occurs in three steps:
1. On the host computer, insure the driver installation steps above have been completed and
the computer has been restarted.
2. Configure your scanner to communicate in USB CDC Host mode by scanning the
barcode below:
DS9808 User Guide (11299907a.pdf) page 6-5.
3. Windows will install the new Motorola CDC driver into its system directories. Once this
is complete, the scanner is ready to be used in CDC mode.
Back to Top
Notes
N/A
Back to Top
Late Additions
N/A
Back to Top
Last revised: January 15, 2013
Copyright (c) 2003-2013
Motorola Solutions, Inc.