May 24, 2014 Auction Inventory @ 1 PM/ Suzi Greenway’s/ 4340 E. Cooper Rd. Stockbridge, MI
Lots:
1. Triumph parts: 650 cylinder, fork leg, 2 damps, conical hub, Bonneville cylinder
head, gaskets, camshafts (2), horn, passenger footpeg rubbers, misc. grommets, etc,
speedo cups (2) high exhaust pipe mount.
2.Household tools: kitchen scissors, power strip, fuse puller, small sockets,
screwdrivers needle files, taps, chisels & punches, tape measures, small oxyacetylene cutting head.
3.Gas powered starting rollers.
4. Three Triumph exhaust pipes, high pipes for 650 twin, 1 high pipe for same set.
5. Triumph mufflers for late model 650-750 twin.
6. Mufflers (5) 1 paid 650 Triumph/BSA, 1 Commando pea shooter, 1 Hooker 2
into 1, 1 Dunstall copy.
7. Norton parts for Commando: coil brackets, footrest arm (right), muffler mount,
Z plate spacer, shift lever (up to ‘74), brake hose bracket, side cover bracket,
isolastic parts (rubbers, bumpers, end caps) front axle spacer. Other: crankshaft,
misc. Atlas pistons.
8.Motorcycle books: 9 pieces general interest.
9. BSA literature: 8 manuals, 1 book
10. Norton literature: 8 pieces – Manual and INOA Tech Digest
11. Books and Manuals: Velocette (1 manual, 1 history), Ducati (1 history, 3
manuals), Aermacci (Mick Walker history).
12. Triumph parts: cylinder (old 650), tapet blocks, tappets, swingarm.
Transmission cover, trans gears, 2 kickstart levers.
13. Triumph mufflers, 1 pair for 650 twin
14.Lucas Rita Ignition for Triumph (BSA) Triple, 3 boxes KLG spark plugs
15. Triumph Literature: (22) manuals, parts lists, histories
16. Rain suit – LARGE Triumph brand
17. Racing Leathers. Vanson Fits 5’9 about, 160 pounds
18. Lockhart racing bike stand
19. BSA Parts: 1 set cables & gasket set for Victor 441, misc. gasket, tank badges,
foot peg rubber, fuel taps, knee pads, speedo/tach brackets (2) A 10 magneto bolt,
rod bearing shell, crankshaft bush, Gold Star intake adapter, pistons, gasket set for
triple, Firebird 650 decals.
20. Norton gear box parts (internal).
21. Triumph Trident toolbox badges (complete set).
22. Norton Seat: Commando Roadster (1972-73).
23. Norton Parts: Cable set, misc. gaskets, 850 balance pipe and clamps, 2 turn
signals, instrument holders, head light ears, shift lever, fuel line, muffler rubbers,
cables, 2 Z plate spacers, side cover grommets, Dzus wires for side cover.
24. BSA Hornet exhaust pipes.
25. Exhaust System (partial): BUB mufflers, crossover, clamps, 1 header pipe (for
Ducati??)
26. Triumph pipes TT style.
27. Small parts cabinets with contents
28. Triumph Alloy Oil Tank
29. Lockheed clutch master cylinder
30. Triumph Parts: Oil pump, taillight, trans. cover, timing cover, points cover,
clutch springs, rod bearings (650), used piston, oil cooler side reflector (new),
gaskets, grille for high exhaust, throttle barrel.
31. Norton Commando front wheel w/disc (1974-74)
32. Tommaselli clip-on bars.
33. Norton Atlas parts: crankshaft, rods, camshaft, engine cases (repaired).
34.Household hardware ( assorted), box of assorted springs, home-made work
lights (2).
35. Trophies & old calendars.
36. Norton Atlas pistons: 10 sets 10.5: 1 forged .040 & .060 over, 4 sets Japanese
made .040 over, 1 cylinder liner, 1 850 piston.
37. Ducati seat and tail section & side covers. (Unknown) red lower fairing,
(unknown) race style wind shield.
38. Smith Instruments: 1 good set speedo & tach (4:1), 1 bad set speedo & tach
(2:1).
39. Norton Parts: Battery box (MkIII?), footrest (right), center stand spring, Atlas
clutch, pushrods, lemon covers, grab rail, (2) Amal 930 carbs (maybe not Norton),
tachometer, New R.H. Handlebar switch for Commando 850, headlight lens and
reflector.
40. Triumph mufflers for TR6C-T100C, new English made repros.
41. Triumph/BSA modified front brake.
42. Triumph parts: Headlight shell, rear fender bracket, points cover, rear
sprockets, swing arm bushings (oil in frame), swing arm needle bearing (oil in
frame), high pipes, misc. engine parts, oil filter T150, points sets (3) T150, taillight
w/bracket.
43. Norton rear wheel (18”), with brake - Atlas or early Commando.
44. Jones 18” WMZ rims (2).
45. Jones 19” WMZ rim rear.
46. Norton front rim for Commando MkIII.
47. Norton cylinder head (Atlas) Casting #25319 Stamped “S”
48. Half fairing – café style (like Dunstall) w/Gustafson windshield.
49. Norton Parts: Commando shocks, Commando chain guard (750), 2 Z plates, 1
footrest, 850 taillight & license bracket, seat grab rail, front brake complete (lever,
hose, caliper) tool kit complete, clutch lever.
50. Norton Parts: Commando headlight w/fork covers, Commando air cleaner (no
element), Commando read chain oiler, Norton handlebar switches & levers,
exhaust rubber mounts.
51. Allow Triumph racing Tank
52. Norton Racing Tank (fiberglass) w/seat and tail section
53. BSA tank – Spitfire Scrambler
54. BSA A65 Seat
55. BSA Side covers – Spitfire Scrambler – steel
56. Michigan license plates (15), 1 Arizona license plate
57. Triumph Cylinder Head. Misc. Triumph parts including steering stem /bearings
58. Triumph 650 misc. engine, trans, carbs, 5degree advance unit
59. BSA Spitfire new heat shield w/clamps
60. Norman Hyde rearset kit for T120
61. Belt Drive kit w/clutch plates for Triumph T120
62. Triumph T150 3 into 1 exhaust system
63. Exhaust system 3 into 1 (Yamaha?)
64. Ducati posters (3)
65. Autographed poster by Gary Nixon 1977 at Loudon, on Suzuki
66. 1 Triumph poster framed, 1 vintage bike poster
67. Road racer poster framed – Paul Smart
68. Norton trophy plaque made with ½ gas tank
69. Miscellaneus mechanics hand tools
70. Miscellaneus wiring: harnesses, spark plug wires, electric tach (Polaris)
headlight lens w/reflector
71. Triumph: Trans parts – shafts, gears. Timing cover, clutch parts, rods
72. Norton rings, mostly Atlas for 750 + 1 Dunstall Commando
BSA ring: 1 set 440 Victor, 1 set A65
73. Norton Commando parts: Kickstart rubber, oil pump, accessory plug, Z-plate,
chain adjuster (MKIII), cam sprocket, points sets, grommets, headlight dimmer
switch, 5/8 master cylinder rebuild kit, 3 brake banjo bolts, points seal tool, brake
pads (new), seat know with washer, 6 petcocks, ignition lock cover, rocker oil
feed pipe, commando spokes, piston.
74. Air lift bench
75. Misc. British brake cables (11), Barnett clutch/brake lever, steel control levers,
2 sets “Titty Grips,” 1 Barnet throttle
76. Models: 1 1/32 scale Ducati 900SS die cast, 1 1/16 scale Triumph plastic
model kit.
77. Tire: Avon AM 20 Super Venom 100/90 –18 (new, tubeless)
78. Tire: Metzler ME880 130/70B 18” fron (new, tubeless)
79. Tire: Yokohama 4.50-18 Y620 rear dual purpose/trials (new)
80. Tire: Dunlop K70 3.50-18 front or rear (used)
81. Tire: Dunop K127 4.00 H-18 rear with direction arrow (new, w/tube)
82. Tire: Mitsuboshi 4.00- 19 rear street (new)
83. Tire: Bridgestone 110/100-18 M58 Motocross (used w/tube)
84. Triumph engine cases w/crankshaft , cam, tach drive T100C EC19051
85. Triumph cases T120R DU67630
86. Triumph engine T100C H47891
87. Ducati: CEV taillight w/license plate bracket, Desmo camshaft, regulator for
750 sport, clutch (probably Ducati)
88.Tap sets, dies, etc: Taps NC thread, metric-tap & drill set, misc. taps, dies,
drills. Tap wrenches.
89. Taps & wrenches assorted.
90. Lot o nuts and bolts. Mostly generic, some cycle
91. Triumph Triple parts: Clutch disc, fender, oil filter, air filters & housing, clutch
cable, exhaust parts, tube (inner)
92. Café style half fairing 3 pc. Yamaha
93. Misc. electrical connectore: crimp-on, spark plug gapers (20, gapping toll (calvan), electric engravers (2), 1 “Master” padlock, magnifier, pliers (2)
94. Carb bodies & parts: Amal 930 R.H. (2), 1 air filter, 1 throttle – single carb, 1
filter screen.
95. Misc. Japanese *2 BOXES*: R6 rear sprocket, MX plastic number plates
(side), gasket sets: kawasaki, Suzuki, Yamaha. Cables, kickstart lever, “Ace” bars,
seat grab rail, mirrors, bar end protectors, levers, fork seals, footpegs, 3 Honda
manuals, 1 Yamaha handbook, EMGO head protectors
96. Steering damper Marked “Reynolds” for Norton Manx, et.al.
97. Misc. tools: hammer, rubber mallet, electric drill, drill index, battery charger,
13 screwdrivers (7 flat, 6 phillips), tape measure, electrical tape roll, 1 set metric
wrenches, 4 pr. Pliers, 4 pc. Inch wrenches, 1-adapter 220-110, glassblower’s
glasses.
98. Misc. Mechanic tools: 22 screwdrivers, 1 set (6) whitworth wrenches – open
end (Gordon/England), 1 set (5) inch combination wrenches (Armstrong), 1 set (5)
misc. metric wrenches, 4 pr. pliers (3/8” sockets 5 BSW, 5 inch, 5 metric)
1 magnet, 1 battery charger, 1-3/8 ratchet, 1-3/8 extension, 2 crescent wrenches.
99. Tool Box w/tools: 3-1/2” ratchet handles, 1-3/8” ratchet handles, 1-1/4” ratchet
handles, 43/8 extensions, 8 pcs.1/2” metric deep sockets, 1 impact driver, misc
allen sockets, allen wrenches, allen wrenches /t-handles, feeler gauges, steel rules,
1 set ½” BSW sockets, 1 set 3/8” metric sockets, spark plug gapers, tire gauges,
punches, jackknife, toolkit wrench-marked “Shelley” 3/16w x 1/4w, toolkit wrench
marked “Triumph,” old chain breaker – marked Harley Davidson, 5 combination
wrenches (BSW) “Spain,” 5combination wrenches inch misc.
100. Smiths Gauges: Speedo-marked BSA 67-69, Tach – marked Triumph 66-69
MORE TO COME. TOOLS & MORE PARTS.
OVER 100 LOTS IN ALL