sec butyl alcohol

advertisement

SEC BUTYL ALCOHOL

Sec-Butyl Alcohol

DESCRIPTION

SEC BUTYL ALCOHOL is a clear liquid with characteristic odor, partially soluble in water and completely miscible with most organic solvents, such as esters and other alcohols. Its evaporation is moderate at room temperature.

Other denominations: sec-butyl alcohol, 2-butanol and sec-butanol.

CAS 1 number: 78-92-2.

SEC BUTYL ALCOHOL has the following advantages:

It is not listed as a HAP to the MIR 3

2 product;

Low VOC (volatile organic compound) emission due to low photochemical reactivity, according

scale;

Low toxicological potential;

Biodegradable;

Low retention in flexible films (polyethylene and polypropylene), reducing blocking after painting, with better organoleptic advantages than that of n-butanol and isobutanol;

Enables better solubilization of resins, allowing less viscous formulas and/or with less active solvents;

With regard to the dilution rate (toluene), it helps the active solvent in accepting diluent.

Regarded as a linking agent, it has better performance compared to n-butanol and isobutanol (60% soluble in water);

Low retention in flexible packages (application of flexographic inks).

1. CAS: Chemical Abstracts Service

2. HAP: Hazardous Air Pollutants

3. MIR: Maximum Incremental Reactivity values for quantifying relative ground-level ozone impacts of volatile organic compound

(VOC).

APPLICATIONS

Leathers

SEC BUTYL ALCOHOL can be used as co-solvent, evaporation retardant solvent for leather finishing.

1

SEC BUTYL ALCOHOL

Sec-Butyl Alcohol

INFORMATIVE PROPERTIES

(*)

Appearance at 25ºC Clear liquid

Suspended solids

Pt-Co Color

Substantially free

15 max.

Density, 20/20 °C.

Water (%wt.)

Distillation range at 760 mm Hg (°C)

PIE, min.

PS, max.

Acidity as acetic acid (ppm)

Purity (%wt.)

Non-volatile material (mg/100ml)

Evaporation rate (butyl acetate = 100)

Boiling point at 760 mm Hg (ºC)

Solubility at 20ºC (%wt.)

• in water

• water in

Self-ignition temperature (ºC)

Surface tension at 20 °C (dynes/cm)

0.807 - 0.809

0.2 max.

98

101

30 max.

99 min.

5 max.

89.7

99.5

60

22.5

406

23.0

Vapor pressure at 20 °C (mm Hg) 12

Freezing point (ºC) -114.7

Flammability limit in air at 100ºC (% volume)

Lower

Upper

Flash point (°C)

Open cup

Closed cup

MIR 3

1.5

9.0

24

23

1.36

NOTES: (*)The characteristics described above are merely informative and may be changed without prior notice. If necessary, consult the specification in effect of the product or contact OXITENO.

2

SEC BUTYL ALCOHOL

Sec-Butyl Alcohol

REGULATORY ASPECTS

Directive 67/548/EEC

SEC BUTYL ALCOHOL complies with Directive 67/548/EEC related to the danger symbols and indications: Xi (irritating).

Dangerous Goods Regulations

SEC BUTYL ALCOHOL is classified in the 50th edition of this regulation, which is related to the

International Air Transport Association – IATA.

IMDG Code

SEC BUTYL ALCOHOL is classified in the 2008 Edition of this directive, which is related to the

International Maritime Organization – IMO.

Resolution 420/2004

SEC BUTYL ALCOHOL complies with Resolution 420/2004 related to the Ministry of Transport.

Occupational Exposure Limit

TLV/TWA 4 (ACGIH 5 ): 100 ppm; PEL/TWA 6 (OSHA 7 ): 150 ppm.

1.

TLV/TWA: Tolerance Limit - Weighted Mean in Time;

2.

ACGIH: American Conference of Governmental Industrial Hygienists;

3.

PEL/TWA: Exposure Limit Allowed - Weighted Mean in Time

4.

OSHA: Occupational Safety and Health Administration

HANDLING & STORAGE

Due to being highly flammable, SEC BUTYL ALCOHOL must be protected from any sources of ignition, such as open flames, hot surfaces and electric discharges. It is not corrosive, therefore, it can be stored in grounded, common carbon steel tanks. It is advisable to handle the product in ventilated places or places with exhaust.

The use of personal protection equipment, such as PVC gloves, coat and safety goggles, is recommended during handling. In case of prolonged exposure, use masks appropriate for organic vapors.

The extinguishing agents are dry chemical powder, carbon dioxide and foam for polar solvents.

The shelf life of SEC BUTYL ALCOHOL is 24 months as of the manufacturing date, provided it is kept in the original pack and in suitable storage conditions.

Note: For further information, consult the Emergency Sheet and the Material Safety Datasheet

(MSDS)

3

SEC BUTYL ALCOHOL

Sec-Butyl Alcohol

PACKAGING

SEC BUTYL ALCOHOL is supplied in metallic drums with capacity for 208 liters and in bulk.

® Oxiteno’s registered trademark.

DISCLAIMER

This bulletin contains information given in good faith, based on Oxiteno’s current knowledge on the subject, and is purely indicative. Any information, including suggestions for using the products, should not preclude experimental testing and verification, which are essential to ensure the suitability of the products to each specific application. All users shall also abide by local laws and obtain all necessary permits. When handling the product, consult the safety data sheet. In case of questions or additional needs, please contact Oxiteno through our customer service channels.

052012

4

Download