Commonwealth
of Australia
No. TC 15/30, Wednesday, 5 August 2015
Published by the Commonwealth of Australia
Gazette
TARIFF CONCESSIONS
CONTENTS
TCO Applications ....................................................................................................... 2
TCO Application Reprocessed with changed Tariff Classification....................... 7
TCO Revocation Requests Withdrawn .................................................................... 8
TCOs Made.................................................................................................................. 9
Intention to Revoke TCOs not used in over 2 years ............................................. 11
Section 273 Determinations Made .......................................................................... 12
Cheese Quota Transfers .......................................................................................... 14
The Department of Immigration and Border Protection publishes the
Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions
Gazette) free of charge on the internet site at: http://www.border.gov.au
Please note that the Industry Assistance Section has changed address.
We are now located at 5 Chan Street Belconnen ACT 2617.
Contact numbers are listed below:
General Email Inquiries: .................................... tarcon@border.gov.au
General Inquiries: ..............................................................(02) 6198 7289
Facsimile: ...........................................................................(02) 6198 7203
TAPIN help desk: .............................................................. (02) 6275 6534
Cat. No.
ISSN 0813-8389
©Commonwealth of Australia, 2015
2
TCO Applications
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
TCO Applications
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.
Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described
are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days
of the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
Objections to the making of TCO submission forms are available at
http://www.border.gov.au/Tariffclassificationofgoods/Documents/typableb4442001.pdf
For guidance on the required description style, phone 02 6198 7289, fax 02 6198 7203 or email
tarcon@border.gov.au.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3808.99.00
FOOD ADDITIVES, having a basis of EITHER or BOTH of the
following:
(a) sodium lactate;
(b) potassium lactate
Op. 09.07.15
Schedule 4 Item Number
General Duty Rate
50
- TC 1526943
Stated Use:
Improve shelf life of food
3920.62.00
Applicant: P & M QUALITY SMALLGOODS PTY LTD
5%
FILM, THERMAL PRINTING AND LAMINATION, in rolls OR sheets,
transparent, having a composition of NOT less than 70%
polyethylene terephthalate (PET)
Op. 08.07.15
50
- TC 1526668
Stated Use:
For producing images and other printed information that can be
laminated to goods for identification purposes, advertising and
also for invisible security printing that communicates encrypted
data
3926.90.90
Applicant: THE PERIPHERALS UNIT TRUST
5%
HOUSINGS, ELECTRICAL CABLE IN GROUND OR UNDERGROUND PIT,
polycarbonate AND/OR glass reinforced polymer (GRP), including
EITHER of the following:
(a) housing cover;
(b) honeycomb construction modular cable holders,
50
with OR without a galvanised steel headframe OR polycarbonate
baseplates
Op. 30.06.15
- TC 1525071
Stated Use:
For in ground or underground pit sealed electrical or
telecommunication cable distribution
Applicant: WEBER SOUTH PACIFIC PTY LTD
5%
3
TCO Applications
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Description of Goods including the
Customs Tariff Classification
3926.90.90
DOWELS AND/OR NUTS, glass reinforced plastic, being EITHER of
the following:
(a) dowels having ALL of the following:
(i) solid OR hollow core;
(ii) seamless;
(iii) continuous thread;
(iv) diameter NOT less than 21 mm,
(b) nuts having an internal thread diameter NOT less than 21 mm
Op. 01.07.15
Schedule 4 Item Number
General Duty Rate
50
- TC 1525295
Stated Use:
Mine roof support applications where larger diameter bolts are
required
4202.32.10
Applicant: JENNMAR AUSTRALIA PTY LTD
5%
CASES, SUNGLASS OR SPECTACLE, with OR without the following:
(a) cleaning cloth;
(b) pouch
Op. 03.07.15
50
- TC 1526006
Stated Use:
Storage and maintenance of spectacles or sunglasses
Applicant: SAFILO AUSTRALIA PTY LTD
7616.99.00
LADDERS, aluminium
Op. 06.07.15
5%
50
- TC 1525942
Stated Use:
Accessing higher and lower levels
8425.39.00
Applicant: TRADESOURCE LTD
5%
WINCH SKID, OIL AND/OR GAS WELL, whether
OR not assembled, including ALL of the following:
(a) protective frame;
(b) cable spooler;
(c) chain AND sprocket drive train;
(d) hydraulic motor;
(e) gearbox;
(f) sprockets;
(g) pneumatically actuated braking;
(h) pneumatic AND/OR hydraulic hoses;
(i) cables, with OR without electrodes AND reels;
(j) storage compartments;
(k) flood lamps;
(l) lifting slings
Op. 03.07.15
50
- TC 1525940
Stated Use:
Deployment and conveyance of wireline logging tools downhole
8431.43.00
Applicant: SCHLUMBERGER AUSTRALIA PTY LTD
5%
PARTS, POWER SLIP, OIL AND/OR GAS WELL, being ANY of the
following:
(a) slips;
(b) insert carriers;
(c) inserts bowls;
(d) carrier blocks
Op. 26.06.15
50
- TC 1524085
Stated Use:
Parts of a hydraulic power slip used on offshore oil rigs
Applicant: NOBLE CONTRACTING II GMBH
5%
4
TCO Applications
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Description of Goods including the
Customs Tariff Classification
8474.31.00
BATCH MIXERS, SLURRY, skid mounted, whether OR not assembled,
including ALL of the following:
(a) hydraulic power pack;
(b) pumps;
(c) NOT less than two batch tanks;
(d) gauges;
(e) agitator;
(f) motor;
(g) gearbox;
(h) hopper AND cutting table;
(i) piping;
(j) valves
Op. 10.07.15
Schedule 4 Item Number
General Duty Rate
50
- TC 1527245
Stated Use:
For the mixing of cement and fluid slurries in oil and gas well
operations
8474.80.00
Applicant: SCHLUMBERGER AUSTRALIA PTY LTD
5%
MINERAL GRANULATION SYSTEM, programmable logic controlled,
including ALL of the following:
(a) dosing screws;
(b) hopper scales;
(c) stirring vessels;
(d) mixer;
(e) feeder;
(f) pelletiser;
(g) hoppers
Op. 08.07.15
50
- TC 1526836
Stated Use:
For the granulation of minerals for manufacturing purposes such
as making fertiliser pellets
8479.89.90
Applicant: AGRIPOWER AUSTRALIA LTD
5%
WIRELINE LOGGING SYSTEM, OFFSHORE OIL AND/OR GAS WELL, whether
OR not assembled, including ALL of the following:
(a) power pack unit;
(b) winch unit;
(c) instrument cabin having acquisition instrumentation
Op. 03.07.15
50
- TC 1525941
Stated Use:
Offshore wireline logging operations in oil and/or gas wells
8479.89.90
Applicant: SCHLUMBERGER AUSTRALIA PTY LTD
5%
PAINT APPLICATOR MACHINES, WOOD AND/OR TIMBER, having ALL of
the following:
(a) painting capacity NOT greater than 9 000 m/ph;
(b) machine weight NOT greater than 700 kg;
(c) rotating brushes;
(d) sprayers
Op. 07.07.15
50
- TC 1526570
Stated Use:
Applying timber treatments and primers to timber profiles
Applicant: DULUXGROUP (AUSTRALIA) PTY LTD
5%
5
TCO Applications
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Description of Goods including the
Customs Tariff Classification
8483.40.90
DRIVE UNIT, SLEWING GEAR, having a torque output NOT less than
53 N m and NOT greater than 55 N m
Op. 07.07.15
Schedule 4 Item Number
General Duty Rate
50
- TC 1526571
Stated Use:
This unit drives the slewing gear on a stacker reclaimer
Applicant: SANDVIK MINING AND CONSTRUCTION AUSTRALIA PTY LTD
8483.60.90
COUPLINGS, flexible disc
Op. 07.07.15
5%
50
- TC 1526427
Stated Use:
To transmit torque by connecting the shafts of two industrial
rotating machines in an LNG plant
Applicant: GLNG OPERATIONS PTY LTD
8483.60.90
COUPLINGS, diaphragm
Op. 07.07.15
5%
50
- TC 1526434
Stated Use:
To transmit torque by connecting the shafts of two industrial
rotating machines in an LNG plant
Applicant: GLNG OPERATIONS PTY LTD
8537.10.90
CONTROLLERS, ROOF SUPPORT, LONGWALL MINE, assembled
Op. 06.07.15
5%
50
- TC 1526361
Stated Use:
Control the hydraulic functions of powered roof supports and/or
shields in long wall mining operations
8537.10.90
Applicant: JOY GLOBAL (AUS) UNDERGROUND PTY LTD
5%
POWER DISTRIBUTION UNITS, having ALL of the following:
(a) switched OR metered controls;
(b) nominal output voltage NOT less than 120 V and NOT greater
than 230 V;
(c) maximum input current NOT less than 10 A and NOT greater
than 32 A
Op. 08.07.15
50
- TC 1526584
Stated Use:
For electrical power distribution and control
8544.49.19
Applicant: SCHNEIDER ELECTRIC (AUSTRALIA) PTY LTD
5%
CABLES, MICROSEISMIC MONITORING, OIL AND/OR GAS FIELD,
encapsulated, with OR without reels OR spools OR drums,
including ALL of the following:
(a) NOT less than 16 conductor pairs;
(b) fluorinated ethylene propylene (FEP) insulation;
(c) outer alloy tube;
(d) external collapse pressure NOT less than 650 bar and NOT
greater than 1 400 bar;
(e) maximum temperature rating NOT greater than 250 degrees
Celsius
Op. 22.07.15
50
- TC 1528613
Stated Use:
Microseismic monitoring in oil and/or gas field applications
Applicant: SCHLUMBERGER AUSTRALIA PTY LTD
5%
6
TCO Applications
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Description of Goods including the
Customs Tariff Classification
8701.90.90
LOG SKIDDER, diesel engine self-propelled, articulated chassis,
4 OR 6 wheel drive, having BOTH of the following:
(a) single OR dual function arch AND grapple;
(b) front mounted blade;
Op. 09.07.15
Schedule 4 Item Number
General Duty Rate
50
- TC 1527242
Stated Use:
Hauling of tree logs in forestry operations
Applicant: ONETRAK PTY LTD
5%
7
TCO Application Reprocessed with changed Tariff Classification
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
TCO Application R epr ocessed wi th changed T ariff Cl assific ati on
CUSTOMS ACT 1901
NOTICE PURSUANT TO SUBSECTION 269N & 269K – REPROCSESSING OF A TCO APPLICATION
A changed Tariff Classifications has been applied to the Tariff Concession Order application shown in the
TABLE below.
Notice of the application appeared in TC 15/29 of 29 July 2015
Australian manufacturers who wish to object to the granting of a Tariff Concession Order for the goods
described are invited to lodge a submission in writing in an approved form. Submissions must be lodged within
50 days of the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
Objections to the making of TCO submission forms are available at
http://www.border.gov.au/Tariffclassificationofgoods/Documents/typableb4442001.pdf
For guidance on the required description style, phone 02 6198 7289, fax 02 6198 7203 or email
tarcon@border.gov.au.
THE TABLE
Description of Goods including the
Customs Tariff Classification
8431.49.90
WHEEL HUB ASSEMBLIES, VEHICLE HAVING A GROSS WEIGHT MORE THAN
3.5 TONNES, with OR without drive wheels, including BOTH of the
following:
(a) axles;
(b) wheel yokes
Op. 22.06.15
Stated Use:
For repairing or manufacturing vehicles having a gross weight of
more than 3.5 tonnes such as straddle carriers
Applicant: ISOLOADER AUSTRALIA PTY LIMITED
Schedule 4 Item Number
50
- TC 1522623
8
TCO Revocation Requests Withdrawn
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
TCO R evocati on R equests Withdrawn
AUSTRALIAN INDUSTRY REVOCATION REQUESTS – WITHDRAWN CUSTOMS ACT 1901
Revocation requests for the Tariff Concession Orders set out in the following TABLE have been withdrawn.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3907.60.00
POLYETHYLENE TEREPHTHALATE, COPOLYMER, having an intrinsic
viscosity NOT less than 0.90 and NOT greater than 1.05
decalitres per gram
Op. 15.06.05
Schedule 4 Item Number
50
- TC 0507317
3907.60.00
POLYETHYLENE TEREPHTHALATE, homopolymer, having an intrinsic
viscosity NOT less than 0.73 and NOT more than 0.8 decalitres
per gram, complying with ASTM 4603, having an acetaldehyde (AA)
level LESS than 1 part per million
Op. 15.07.05
- TC 0509439
50
3907.60.00
POLYETHYLENE TEREPHTHALATE, having BOTH of the following:
(a) intrinsic viscosity of NOT less than 0.925;
(b) acetaldehyde (AA) level less than 1 part per million
Op. 22.08.05
50
- TC 0511112
9
TCOs Made
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
TCOs M ade
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of
substitutable goods may request the revocation of TCOs at any time.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3402.20.00
3402.20.00
3920.62.00
3926.90.90
8302.50.00
8412.29.00
8419.81.90
8421.29.00
8421.29.00
8436.80.90
Schedule 4 Item Number
Last Date of Effect
DETERGENT TABLETS AND/OR CAPSULES, DISHWASHER, having BOTH of
the following:
(a) gel compartment;
(b) powder compartment
Op. 23.03.15
Dec. date 03.08.15
- TC 1511552
GEL, DISHWASHING MACHINE, having soluble film cases
Op. 21.04.15
Dec. date 03.08.15
- TC 1515151
FILM, POLYESTER, having ALL of the following:
(a) polypropylene terephthalate glycol (PETG) sealing layer;
(b) oriented polypropylene (OPP) base layer;
(c) oxygen barrier layer;
(d) thickness less than 45 microns;
(e) anti-fog treatment
Op. 20.04.15
Dec. date 31.07.15
PROTECTORS, UMBILICAL, OIL AND/OR GAS WELL, moulded, buoyant,
hinged
Op. 13.05.15
Dec. date 03.08.15
50
50
50
- TC 1515098
50
- TC 1518357
HOOKS, being ANY of the following:
(a) coat AND/OR robe;
(b) anti-ligature;
(c) collapsible;
(d) catheter
Op. 15.05.15
Dec. date 03.08.15
- TC 1518607
GEAR MOTORS, hydraulic, with OR without gear reducer OR gearbox
Op. 24.04.15
Dec. date 31.07.15
- TC 1515978
ROTARY COOKERS, grain, pressurised steam, having a volume NOT
greater than 2.2 m3
Op. 05.02.15
Dec. date 31.07.15
PRESSES, FILTER, having an operating pressure NOT less than 13
bar
Op. 11.05.15
Dec. date 03.08.15
WELLBORE DEBRIS REMOVAL TOOLS, DOWNHOLE, whether OR not
assembled, including ALL of the following:
(a) connectors;
(b) compensators;
(c) motors;
(d) gearboxes;
(e) couplings AND flex shafts;
(f) progressive cavity pumps;
(g) filter screens;
(h) bailers
Op. 14.05.15
Dec. date 03.08.15
HEDGER AND TOPPER AND SKIRTER, single boom, tractor mounted,
having BOTH of the following:
(a) cutting pass NOT less than 270 cm and NOT greater than
300 cm;
(b) variable speed rotating cross, having three 61 cm diameter
saw blades
Op. 08.05.15
Dec. date 03.08.15
50
50
50
- TC 1504882
50
- TC 1517694
50
- TC 1518526
50
- TC 1517627
10 TCOs Made
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Description of Goods including the
Customs Tariff Classification
8474.90.00
8525.80.90
8606.30.00
9207.90.00
9207.90.00
9403.90.00
PARTS, PROCESSING PLANT MIXER, being rotors having adjustable
AND/OR configurable AND/OR retractable pinned beaters OR blades
Op. 07.05.15
Dec. date 03.08.15
CLOSED CIRCUIT TELEVISION INSPECTION SYSTEM (CCTV), having a
camera AND two OR more of the following:
(a) base unit consisting of the following:
(i) monitor;
(ii) processor;
(iii) control panel,
(b) cable drum;
(c) crawler;
(d) lowering hoist;
(e) operator console
Op. 06.05.15
Dec. date 03.08.15
WAGONS, RAILWAY, MINING ORE, standard gauge, having a maximum
gross weight carrying capacity on rails of NOT less than 80 t
Op. 02.04.15
Dec. date 03.08.15
VIOLINS, electric, including ALL of the following:
(a) stereo piezo pickup;
(b) built-in amplifier;
(c) line AND phone out connectivity;
(d) earphone
Op. 18.05.15
Dec. date 03.08.15
VIOLA, electric, including ALL of the following:
(a) stereo piezo pickup;
(b) built-in amplifier;
(c) line AND phone out connectivity;
(d) earphone
Op. 18.05.15
Dec. date 03.08.15
PARTS, DRAWER SLIDE SYSTEM, metal, being ALL of the following:
(a) metal drawer sides;
(b) self closing, full extension drawer runners;
(c) back brackets;
(d) front fixing brackets
Op. 07.05.15
Dec. date 03.08.15
Schedule 4 Item Number
Last Date of Effect
50
- TC 1517310
50
- TC 1517574
50
- TC 1513699
50
- TC 1518608
50
- TC 1518610
50
- TC 1517625
11 Intention to Revoke TCOs not used in over 2 years
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Intention to Revoke TC Os not us ed i n over 2 years
TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS
The Comptroller-General of Customs is satisfied that CTCOs and TCOs listed in the table below are no longer
required because, in the 2 years preceding the day of this notice, they have not been quoted in an import
declaration to secure a concessional rate of duty.
From Thursday, 03 September 2015, it is intended to take action to revoke these Orders under subsection
269SD(1A) of the Customs Act 1901. In accordance with subsection 269SG(2) of the Customs Act 1901, in-transit
provisions shall apply. If revoked, the expected date of effect will be 02 September 2015.
Interested parties are invited to provide, by close of business, Wednesday, 02 September 2015, written reasons
why an Order should NOT be revoked.
Please advise if any of the Orders listed below have been quoted on an import declaration.
If a request is made to retain an Order used for the granting of a Determination, please specify the
Determination and the linked Item number to enable mapping to the Order and its scope.
Contact: Email tarcon@border.gov.au, fax 02 6198 7203 or phone 02 6275 6534.
THE TABLE
______________________________________________________________________________________________________________
Tariff
Description
Concession Number
Classification
______________________________________________________________________________________________________________
7223.00.00
WIRE, stainless steel, cold rolled, rectangular, polished, in
coils, having BOTH the following:
(a) width NOT exceeding 7 mm;
(b) thickness NOT exceeding 5 mm
Op. 30.11.01
Dec. date 01.03.02
- TC 0110877
7225.40.00
STEEL PLATE, chromium-molybdenum alloy, conforming to European
Standard 10028 10CrMo9-10 (EN 10028 10CrMo9-10), having ALL of
the following:
(a) length NOT less than 5 000 mm;
(b) width NOT less than 1 200 mm;
(c) thickness NOT less than 20 mm
Op. 16.05.11
Dec. date 01.08.11
- TC 1115409
7225.50.00
PLATES AND SHEET, high speed steel, but NOT including those that
have been hollow ground OR those that have centre holes OR pin
holes
Op. 01.01.07
Dec. date 08.11.06
- TC 0614206
7225.50.00
PLATE OR SHEET, nickel alloy steel, complying with American
Society for Testing and Materials (ASTM) designation A553
Op. 09.05.08
Dec. date 08.08.08
- TC 0807302
7225.99.00
PLATES AND SHEET, high speed steel, but NOT including those that
have been hollow ground OR those that have centre holes OR pin
holes
Op. 01.01.07
Dec. date 08.11.06
- TC 0614207
7225.99.00
PLATE OR SHEET, nickel alloy steel, complying with American
Society for Testing and Materials (ASTM) designation A553
Op. 09.05.08
Dec. date 08.08.08
- TC 0807297
7226.91.00
PLATES, SHEET OR FLATS, high alloy steel, to DIN specification
1.2436 (X210CrW12)
Op. 10.04.96
Dec. date 12.07.96
- TC 9605603
7227.20.90
COIL, alloy steel, hot rolled, having a diameter NOT less than
19 mm and NOT greater than 23 mm
Op. 16.07.08
Dec. date 10.10.08
- TC 0818981
7227.90.10
COIL, alloy spring steel, hot rolled, having ALL of the
following:
(a) NOT less than 0.40% by weight carbon;
(b) NOT less than 1.0% by weight silicon;
(c) diameter NOT less than 19 mm and NOT greater than 23 mm
Op. 23.12.10
Dec. date 17.02.11
7228.10.00
- TC 1106497
RODS, HIGH SPEED STEEL, hot rolled, annealed, in coil form, having
a diameter of 5 mm OR greater
Op. 14.11.02
Dec. date 31.01.03
- TC 0210775
12 Section 273 Determinations Made
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Sec tion 273 D eter minati ons Made
NOTICE OF DETERMINATIONS MADE UNDER PART XVI OF THE CUSTOMS ACT 1901
Under subsection 273B(2) of the Customs Act 1901, notice is hereby given of the making of determinations
applying to goods of a kind specified in the table below.
In the table:
(i) the first column specifies the kind of goods to which the Determination applies, any conditions specified
in the Determination, the commencement and cessation dates of the Determination and the Determination
reference number;
(ii) the second column specifies the item in Schedule 4 to the Customs Tariff Act 1995 that applies to the
specified goods.
(iii) ‘AD’ indicates the determination was made by AusIndustry;
(iv)
‘DE’ indicates that the determination was made by Immigration and Border Protection
Goods ancillary to an EPBS project, including office equipment, buildings, office/personnel accommodation and
goods used in activities such as land preparation, road construction and maintenance, transportation (other
than pipes, pipelines, conveyors, power transmission lines, flexible flow lines, etc. integral to the project
and used to convey gas liquids, minerals, electricity or other materials or goods) and the provision of
telecommunications and other general services are excluded. Materials, consumables and construction and
servicing equipment, including all fuels, oils lubricants, adhesives, filters, protective garments, tools,
ladders (other than articles auxiliary to and designed to be permanently attached to eligible goods under
EPBS, such as pylons, supporting structures, staircases, ladders, railings, etc.) paint, varnish and the like
are ineligible under EPBS, as are spare parts used for on-going maintenance beyond the commissioning of the
project.
EPBS Determinations also apply to all goods listed in the Determination when they are imported in multiple
shipments, which may be from different locations at different times.
Where a number of EPBS Determinations are issued for a particular eligible good, all associated Determinations
must not exceed the quantity of goods approved by the Delegate in the EPBS Project Eligible Goods List.
THE TABLE
Importer
Project Proponent
Project Name
Description of Goods
Dates of Effect
Exclusions
High impact, environmental stress crack resistant (ESCR)
polystyrene resins used specifically in the manufacture of internal
liners of a domestic refrigerator as follows.
02.07.15 to 30.06.17
Schedule 4
Item Number
46
- AD 01004130
Goods, imported by SINO IRON PTY LTD (ABN 31058429708), for use in
the CITIC PACIFIC MINING MANAGEMENT PTY LTD (ABN 64119578371), Sino Iron Project,
as follows:
(a) Six (6) only Stacker and/or reclaimers, Ore Handling, having
ALL of the following:
(i) pulleys;
(ii) conveyor belts, and
(b) Components of the goods specified in (a) above, including
commissioning spare parts integral to the project.
(c) But specifically excluding the following:
(i) drives;
(ii) bogies;
(iii) equalisers;
(iv) luff hydraulics.
13/10/2012 to 28/02/2013 AD 01004125
Goods, imported by SINO IRON PTY LTD (ABN 31058429708), for use in
the CITIC PACIFIC MINING MANAGEMENT PTY LTD (ABN 64119578371), Sino Iron
Project, as follows:
(a) Six (6) only Stacker and/or reclaimers, Ore Handling, having
ALL of the following:
71
44
46
13 Section 273 Determinations Made
Importer
Project Proponent
Project Name
Description of Goods
Dates of Effect
Exclusions
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Schedule 4
Item Number
(i) pulleys;
(ii) conveyor belts, and
(b) Components of the goods specified in (a) above, including
commissioning spare parts integral to the project.
(c) But specifically excluding the following:
(i) drives;
(ii) bogies;
(iii) equalisers;
(iv) luff hydraulics.
1/03/2013 to 12/10/2014
AD 01004126
Goods, imported by SINO IRON PTY LTD (ABN 31058429708), for use in
the CITIC PACIFIC MINING MANAGEMENT PTY LTD (ABN 64119578371),
Sino Iron Project, as follows:
(a) One (1) only Dewatering Plant, comprising ALL of the following:
(i) vertical plate pressure filter;
(ii) hydraulic cylinder system;
(iii) slurry feeders; and
(b) Components of the goods specified in (a) above, including
commissioning spare parts integral to the project.
(c) But specifically excluding the following:
(i) membranes;
(ii) filter cloths.
13/10/2012 to 28/02/2013
AD 01004127
Goods, imported by SINO IRON PTY LTD (ABN 31058429708), for use in
the CITIC PACIFIC MINING MANAGEMENT PTY LTD (ABN 64119578371),
Sino Iron Project, as follows:
(a) One (1) only Dewatering Plant, comprising ALL of the following:
(i) vertical plate pressure filter;
(ii) hydraulic cylinder system;
(iii) slurry feeders; and
(b) Components of the goods specified in (a) above, including
commissioning spare parts integral to the project.
(c) But specifically excluding the following:
(i) membranes;
(ii) filter cloths.
1/03/2013 to 12/10/2014
AD 01004128
71
44
14 Cheese Quota Transfers
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
Chees e Quota Tr ans fers
DEPARTMENT OF IMMIGRATION AND BORDER PROTECTION
TARIFF QUOTAS - QUOTA TRANSACTIONS PROCESSED DURING THE PERIOD 28 JULY 2015 TO 04 AUGUST 2015.
GENERAL INFORMATION
This Gazette contains details of quota transactions processed during the period 28 July 2015 to 04 August 2015
inclusive.
Part 1 contains a Table specifying quota category details.
Part 2, Section A, lists quota holders who received quota allocations via transfer transactions.
Part 2, Section B, lists all adjustments to previous allocations which have been caused by transfer
transactions.
NB.- In Section B, transactions represent changes to individual tariff quotas and do not necessarily represent
the entire holdings in that category for the quota holder.
- The "AS WAS" and "AS IS" columns indicate the quota levels for that particular tariff quota only at
the time of that transaction.
- The amount of the transaction can be deduced by subtracting the "AS WAS" column from the "AS IS"
column.
Inquiries concerning any information published within this Gazette should be directed to the Trade Branch,
Department of Immigration and Border Protection, Orange Building, 5 Chan Street, Belconnen, ACT, 2620.
PART 1
NOTICE OF MAKING A DETERMINATION UNDER PART XVI OF THE CUSTOMS ACT 1901
In pursuance of Section 273B of the Customs Act (1901), notice is hereby given that a Determination specified
in Section A of Part 2 was made in relation to Item 55 in Part III of Schedule 4 to the Customs Tariff Act
(1995) and subject to any conditions set out hereunder, that Determination applies to goods that are:
(1) specified in the Table hereunder;
(2) classified under a subheading of Schedule 3 to the Customs Tariff Act (1995), specified in Item 55 in Part
III of Schedule 4 to the Customs Tariff Act (1995);
(3) entered for home consumption not earlier than the start date, and not later than the finish date, by the
person specified in that Determination, as shown in Part 2; and
(4) in total, not in excess of such quantity as is specified in that Determination, as shown in Part 2.
In pursuance of Section 273B of the Customs Act (1901), notice is hereby given that a Determination specified
in Section B of Part 2 amended a previous Determination by deleting the figures in the column headed “QUANTITY
AS WAS" and inserting the figures in the column headed "QUANTITY AS IS".
THE TABLE
CATEGORY
CODE
UNIT
QUANTITY
QUOTA
ITEM
NUMBER
QUOTA
DESCRIPTION
311
Kilograms
61A
Cheese & Curd
15 Cheese Quota Transfers
Commonwealth of Australia Gazette
No TC 15/30, Wednesday, 05 Aug 2015
PART 2
SECTION A – QUOTA ALLOCATIONS
CAT
CODE
QUOTA HOLDERS LEGAL NAME
POST
CODE
QUANTITY (KG)
DETERMINATION
NUMBER
PART 2
SECTION B – AMENDED ALLOCATIONS
CAT
CODE
311
311
QUOTA HOLDERS LEGAL NAME
A.Q.M.S. PTY. LTD.
THE TRUSTEE FOR THE CAZZOLATO FAMILY TRUST
POST
CODE
3068
4006
QUANTITY (KG)
AS WAS
128,232.00
296.00
QUANTITY (KG)
AS IS
127,643.00
885.00
DETERMINATION
NUMBER
000721
000721