SOLTEQ®
Equipment for Engineering Education & Research
MULTI-PUMP TEST RIG
MODEL: SE 701A-3
HIS Multi-Pump Test Rig (Model: SE 701A-3) is specially designed for students demonstrations on the
principle operating characteristics of different types of pumps. The unit is supplied with two centrifugal
pumps and a positive displacement pump. The unit incorporates appropriate pipe work and tanks to
make the operation self-contained. The manually operated valves and pipe work are arranged for rapid and safe
selection of any one test pump. Measurement sensors are included to monitor the pump speed, power, pump
head and flowrate.
T
EXPERIMENTAL CAPABILITIES
♦ Centrifugal Pumps
a) Horizontal Single Stage
b) Vertical Multistage
Measurement of inherent speed pump
performance, including production of characteristic
curves of flowrate against:
i)
Pump total head
ii)
iii)
iv)
v)
Motor input power
Pump speed
Overall total efficiency
Estimated pump power and efficiency
♦ Positive Displacement Pump
Measurement of inherent speed pump
performance, including the production of
characteristic curves of outlet pressure against:
i)
ii)
iii)
iv)
v)
Equipment for Engineering Education & Research
Flow rate
Motor input power
Pump speed
Overall total efficiency
Volumetric efficiency
♦ Demonstration of horizontal single stage and
vertical multi stage centrifugal pumps and positive
displacement pumps in operation.
d) Water Tank
Capacity : 100 L
Material
: Stainless Steel
e) Oil Tank
Capacity
Material
f)
♦ Introduction to pump speed laws.
SPECIFICATIONS
The unit is self contained constructed on epoxy coated
steel frame and platform with lockable wheels. The
pumps, tank, instrumentation and valves are
strategically located for easy access. For safety
reasons, the control box is well protected against water
splashes. The process pipings are of 1 inch industrial
grade for the centrifugal pumps and of 1/2 inch for the
positive displacement pump. All valves used are rust
and corrosion resistant.
Electrical wiring are properly laid out in flexible PVC
conduit and all instrument cables are screened.
Individual starters to the pumps are provided. Power
cable for the pumps are laid in separate conduit from
instrument cables. Identification tags are provided for
every major items in the unit.
a) Horizontal Single Stage Centrifugal Pump
Capacity : 30 LPM
Head
: 10 m
Electrical : 415VAC/3-phase/50Hz
b) Vertical Multistage Centrifugal Pump
Capacity : 50 LPM
Head
: 30 m
Electrical : 415VAC/3-phase/50Hz
c) Gear Pump
Capacity : 8.5 LPM @ 10 bar
Electrical : 415VAC/3-phase/50Hz
SOLTEQ
SOLTEQ®
: 30 L
: Stainless Steel
Instrumentations
The unit is fitted with all the necessary measuring
devices for measuring flowrates, pressures, pump
speeds and motor power.
OPTIONAL ITEMS
- EI
DIGITAL INSTRUMENTATION
i)
ii)
iii)
iv)
v)
vi)
4 units of digital indicator
3 units of speed sensor
2 units of turbine flowmeter
1 unit of pressure transmitter
1 unit of differential pressure transmitter
1 unit of power transducer
-DAS
SOLDAS DATA ACQUISITION SYSTEM
i) A PC with latest Pentium Processor
ii) An electronic signal conditioning system
iii) Stand alone data acquisition modules
iv) Windows based software
♦ Data logging
♦ Signal analysis
♦ Process control
♦ Real-time display
♦ Tabulated results
♦ Graph of Experimental Results
- CAL
SOLCAL COMPUTER AIDED LEARNING
SOFTWARE
i) Interactive multimedia features
ii) Graphical simulation
iii) Experiment results samples
iv) Full experiment manuals
SOLTEQ®
Equipment for Engineering Education & Research
Electrical supply
Water supply
Oil
: 415VAC/3-phase/50Hz
: laboratory mains supply
: Cooking oil
OVERALL DIMENSIONS
Length : 2.42 m
Width : 1.20 m
Height : 1.82 m
SOLTEQ
MANUAL
REQUIREMENTS
The unit is supplied with Operating and Experiment
Manuals in English giving full descriptions of the
unit, summary of theory, experimental procedures
and typical experimental results.
SOLTEQ®
Equipment for Engineering Education & Research
SOFTWARE & E - LEARNING
Our range of teaching equipment can be complemented with our
SOLDAS and SOLCAL software.
SOLDAS® - Supervisory Control & Data Acquisition
- Data Logging
- Signal Analysis
- Process Control
- Real-Time Display
- Tabulated Results
- Graph of Experimental Results
SOLCAL® - Computer Aided Learning
- Multimedia Features
- Interactive
- Graphic Simulation
- Experiment Result Samples
- Full Experiment Manuals
Contact us for a catalog CD
SOLUTION ENGINEERING SDN. BHD.
AGENT:
(Co. No. 174876-M)
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,
47100 Puchong, Selangor Darul Ehsan, Malaysia.
Tel. No. : +(603) 80758000
Fax. No. : +(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,
Bukit Jalil, 57000 Kuala Lumpur, Malaysia.
Tel. No. : +(603) 8996 0023
Email
: solution@solution.com.my
Web site : http//www.solution.com.my/
BUATAN MALAYSIA
MSC- Status
Company