MASTER OF ENGINEERING IN OIL AND GAS (62520)
Course Study Guide – Commencing Semester 1, 2016
Year 1
Semester 1
2016
OGEG5810 (TS-L-1)
The Hydrocarbon Economy
OGEG5801 (TS-L-2)
Introduction to Oil and Gas
Engineering
CONVERSION UNIT
CONVERSION UNIT
Semester 2
2016
GENG5803
Investment Management for Field
Development
GENG5504
Petroleum Engineering
CONVERSION UNIT
CONVERSION UNIT
CHPR5521
Gas Processing 1—Flow Assurance
and Gathering
CHPR4404
Advanced Thermodynamics
OGEG5803
Reservoir Engineering
GENG5505
Project Management and
Engineering Practice
CHPR5522
Gas Processing 2—Treating and
LNG Production
OGEG5809
Field Development Project
CIVL5505
Introduction to Design of Offshore
Systems
GENG5507
Risk, Reliability and Safety
Prereq: ENSC3003
Year 2
Semester 1
2016
Coreq: CHPR4404
Semester 2
2016
Prereq: ENSC3006
Coreq: CHPR4404
Four conversion units will be selected by the Program Chair based on your previous academic qualifications:
Conversion Units:
Pre-requisites:
ENSC3003 Fluid Mechanics (Sem 1)
ENSC3004 Solid Mechanics (Sem 1)
ENSC3006 Chemical Process Thermodynamics & Kinetics (Sem 1)
ENSC3007 Heat and Mass Transfer (Sem 2)
ENSC3018 Process Synthesis & Design (Sem 2)
ENSC3019 Unit Operations & Unit Processes (Sem 2)
SEM-1-2016-MEOG-2-Year-Study-Guide-Non-cognate_V1.0.rtf
ENSC3007 Heat and Mass Transfer
Advisable prior study: ENSC3003 Fluid Mechanics, ENSC3006 Chemical Process Thermodynamics and
Kinetics
ENSC3007 Heat and Mass Transfer
Co-requisites: ENSC3006 Chemical Process Thermodynamics and Kinetics
Page 1 of 2
Conversion Units:
Pre-requisites:
CHPR4406 Reaction Engineering (Sem 2)
ENSC3006 Chemical Process Thermodynamics & Kinetics
CHPR4407 Transport Phenomena (TS-L-3)
ENSC3003 Fluid Mechanics and ENSC3007 Heat and Mass Transfer
CHPR5501 Advanced Reaction Engineering and Catalysts (Sem 1)
CHPR4406 Reaction Engineering
CHPR5520 Combustion Science and Technology (TS-L-4)
ENSC3006 Chemical Process Thermodynamics & Kinetics and CHPR4406 Reaction Engineering
Non-standard teaching periods:
TS-L-1 = 29 Feb - 22 Apr 2016
TS-L-2 = 25 Apr - 17 June 2016
TS-L-3 = 1 Aug – 23 Sept 2016
TS-L-4 = 26 Sept – 18 Nov 2016
More information on intensive mode learning in the non-standard teaching period can be found at http://www.ecm.uwa.edu.au/students/IML
If you need to discuss your study plan further, please contact the ECM Student Office at enquiries-ecm@uwa.edu.au.
Information in this study guide is correct as at 1 December 2015, but is subject to change from time to time. In particular, the University reserves the right to change the unit
availability and unit rules. Information about unit availability should be checked at the beginning of each semester and can be found at Timetables:
http://www.timetable.uwa.edu.au/, Handbooks: http://handbooks.uwa.edu.au/ or Study Guides: http://www.ecm.uwa.edu.au/students/study-guides. The Rules for the MEOG are
available at http://handbooks.uwa.edu.au/rules?code=62520.
SEM-1-2016-MEOG-2-Year-Study-Guide-Non-cognate_V1.0.rtf
Page 2 of 2