LDP SERIES
DATA BOOKLET
Drum Pumps
50 Hz
Pumps Motors
ISO 9001 Company
Pumping Solution
Contents
LDP
Drum pumps
Electric & pneumatic drum pumps
Introduction
Applications
Features and benefits
Type key - pump
Type key - motor
Modular design
Design features
Pump set 1 - Stainless steel AISI 316
Pump set 2 - CPVC (Chlorinated Polyvinyl Chloride)
Pump set 3 - PP (Polypropylene)
Pump set 4 - PVDF (Polyvinylidene Fluoride) Kynar®
Motors
Accessories
4
4
4
5
5
5
6
7
8
9
10
11
12
Drum hand pumps
Introduction
Applications
Features and benefits
Technical specifications
13
13
13
13
Heavy-duty electric drum pumps
Introduction
Applications
Features and benefits
Technical specifications
14
14
14
14
Air-driven piston drum pumps
Introduction
Applications
Features and benefits
Technical specifications
15
15
15
15
Vacuum pumps
Introduction
Applications
Features and benefits
Technical specifications
16
16
16
16
Pail pumps
Introduction
Applications
Features and benefits
Technical specifications
17
17
17
17
Gallon pumps
Introduction
Applications
Features and benefits
Technical specifications
18
18
18
18
3
Electric & pneumatic drum pumps
Drum pumps
LDPTS, LDPTC, LDPTP, LDPTK, LDPMA, LDPMB
Introduction
Applications
The Lubi electric and pneumatic drum pumps are centrifugal
These pumps are used for pumping out liquids from drums,
and self priming pumps, which provides a safe and accurate
barrels, large storage vessels, stainless steel tanks, totes, etc.
way to transfer liquids from drums, containers, tanks and totes.
Drum pumps are widely used by different sectors such as:
Pumps have vertical suction and horizontal discharge port.
• Chemical plants
These are lightweight, handy and extremely powerful
• Food processing plants
devices suitable for transferring thin to low viscous, neutral
or corrosive, aggressive & non-aggressive, non-flammable
• Packaging plants
and non-explosive liquids. Designed for portable and static
use the pumps are particularly suitable for intermittent
• Plating
operation.
• Semiconductor
The state-of-the-art design and high efficiency motors offer
• Waste water treatment
an accurate and cost effective alternative to the hazards of
handling liquids. Modular concept design provides
• Pharmaceutical
interchangeability of Lubi various tubes of different material
to the standard high speed Lubi electric or air motor.
• Laboratories
The drum pumps eliminate the need to turn over barrels
or drums to remove the liquid inside.
• Automotive industries
• Agriculture.
The pumps consists of:
Features and benefits
• Pump tube
• Electric or air motor
These pumps are designed specially for drums, vats, totes,
containers, carboys, open vessels up to 1.5 mtrs (60") deep.
Pumps can be driven by either electric motor or air motor.
• High quality components
Lubi offers wide range of material variant for pump tubes as
suitable for different types of pumped liquids.
• Light weight, portable
• Easy to install, user friendly operation
Pump tubes are available in four basic versions as
described below:
•
•
•
•
• Ergonomically designed handle
• Safe chemical transfer, an alternative to manual - minimizes
danger of spills, vapors, burns, health, environmental,
liability concerns
Stainless steel AISI 316 pump
CPVC (Chlorinated Polyvinyl Chloride) pump
PP (Polypropylene) pump
PVDF (Polyvinylidene Fluoride) Kynar® pump
• Pulsation free
• Inherent flooded suction
Motors are available in two basic versions as described
below:
• Sealless design
• Pump operated with high speed electric motor
(10000 rpm at 50 Hz)
• Pump operated with air motor.
• Operates by AC electric motor or pneumatic air motor.
• Few parts - maintenance friendly
• Pumps liquids with viscosity up to 1000 cps
The mechanism of drum pumps is very simple. It consists of
a vertical shaft inside a very narrow tube, which can fit
into the opening at the top of a standard drum or container.
A small motor, located at the top of the tube, is connected
to the shaft. This motor is AC electric motor or Air motor,
with a trigger switch. At the bottom of the tube is the
pumping element itself. Turn on the pump, and the liquid
will be drawn out in a steady flow. While using minimal
power, drum pumps also lower the risk of spillage.
• Electric motors are available with speed control
• Limited dry run capability.
• Flow rates to 104 l/min (27 USgpm)
• Pressures to 2.4 bar (22 metres of head)
• Temperatures to +88°C (+190°F)
4
Electric & pneumatic drum pumps
LDPTS, LDPTC, LDPTP, LDPTK, LDPMA, LDPMB
Drum pumps
Type key - Pump
Example
Type key - Motor
LDP
TS
4
Example
Lubi drum pump series
Pump type
TS = Stainless steel AISI 316 pump
TC = CPVC (Chlorinated Polyvinyl
Chloride) pump
TP = PP (Polypropylene) pump
TK = PVDF (Polyvinylidene Fluoride)
Kynar® pump
Immersion length
2 = (27") 700 mm length
3 = (39") 1000 mm length
4 = (47") 1200 mm length
LDP
MA
07
V
Lubi drum pump series
Motor type
MA = High speed electric motor
(10000 rpm at 50 Hz)
MB = Air motor
Motor output
07 = 0.75 hp
Variable speed control*
V = With Variable speed control
N = Without Variable speed control
* Applicable only with high speed electric motor.
Modular design (interchangeability of motor to pump)
LDP series
Lubi Drum pump
High speed electric
motor
(Motor type - LDPMA)
Stainless steel AISI 316
pump
(Pump type - LDPTS)
Air (pneumatic)
motor
(Motor type - LDPMB)
PP (Polypropylene)
pump
(Pump type - LDPTP)
CPVC (Chlorinated
Polyvinyl Chloride) pump
(Pump type - LDPTC)
5
PVDF (Polyvinylidene
Fluoride) Kynar® pump
(Pump type - LDPTK)
Electric & pneumatic drum pumps
Drum pumps
LDPTS, LDPTC, LDPTP, LDPTK, LDPMA, LDPMB
Design features
Unique drop-in brush system
High speed electric motor
0.55 kW/0.75 HP, 1 ph, 230 V,
10000 rpm at 50 Hz.
Lubi pump tubes are interchangeable
with Lubi Electric motor and Lubi Air motor
ON-OFF control switch
For easy start and stop of
drum pump
Motor housing provides
added chemical resistance
Ergonomically designed
handle
Coupling
Ball bearing
Carbon filled PTFE seal
Modular handwheel design
Which helps interchangeability of
Lubi various tubes of different material
to the standard high speed Lubi
electric or air motor
Discharge port
Inner tube
Outer tube
Thick, robust wall construction
O-ring
Carbon filled PTFE guide sleeve
Hastelloy drive shaft
For pump type LDPTC, LDPTP, LDPTK
Stainless steel AISI 316 drive shaft
For pump type LDPTS
O-ring
Inner tube
Impeller
O-ring
Carbon filled PTFE bushing
Impeller housing
6
Electric & pneumatic drum pumps
Pump set 1- Stainless steel AISI 316
Drum pumps
Drum pumps for light oils
Lubi's Stainless steel AISI 316 pump set is engineered for
transferring light oils and suitable chemicals.
Robust stainless steel AISI 316 construction offers excellent
strength and durability.
Common applications
• Light machining oils
• Transmission fluid
Technical specifications
Motor type
: LDPMA (Electric motor) or LDPMB (Air motor)
Pump tube type
(pump assembly)
: LDPTS (Stainless steel AISI 316)
Pump length
: 1000 mm (39"), 1200 mm (47")
Pump design
: Sealless centrifugal
Wetted parts
: S.S AISI 316, Carbon filled PTFE
Discharge options
: 25 mm (1") / 19 mm (3/4") hose barb
Hose
: 1.8 mtrs (6 ft), I.D. 25 mm (1") PVC
Dispensing nozzle
: 25 mm (1"), PVDF
Shaft
: Stainless steel AISI 316
Barrel adapter
: Stainless steel
Storage bracket
: Steel
Max. flow rate
: 69 l/min (18 USgpm) based on water
Max. pressure
: 19.3 mtrs. (63 ft)
Max. temperature
: +80°C (+175°F)
Max. viscosity
: 1000 cps
Max. specific gravity: 1.8
Performance curves
8
12
Q (USgpm)
16
1.5
1
LDP
TS
15
10
0.5
5
0
0
LDPT
with
30
50 Hz
20
H mts.
p (bar)
2
ISO 9906 Annex A
LDPTS: S.S 316 pump tube
LDPMA: Electric motor
LDPMB: Air motor
60
40
LDP
MA
20
S wit
h LDP
MB
0
0
20
0.2
0.8
25
20
15
10
5
0
0
35
80
LDPTS
Based on water at 21°C (70°F)
p (PSI)
4
H ft.
0
25
40
0.4
0.6
1.6
0.8
2.4
3.2
60
Q (l/min)
1
Q (l/sec)
4
0
3
Q (m /h)
Note: While ordering pump set, please mention ordering code separately for both pump type and motor type. While ordering only pump or only motor,
please mention ordering code for only pump type or only motor type respectively. Type keys for pump type and motor type are available on page 5.
Discharge hose, Trigger nozzle, Strainer, Barrel adapter and Wall bracket have to be ordered separately. Kindly refer page No.12 for part nos.
7
Electric & pneumatic drum pumps
Pump set 2 - CPVC (Chlorinated Polyvinyl Chloride)
Drum pumps
Drum pumps for water treatment chemicals
Lubi's CPVC pump set is engineered for transferring corrosive
chemicals commonly used in the water treatment industry.
Robust CPVC construction offers excellent durability and
chemical resistance.
Common applications
• Sodium Hypochlorite
• Calcium Chloride
• Calcium Hydroxide
• Potassium Hydroxide
• Sodium Bromide.
Technical specifications
Motor type
: LDPMA (Electric motor) or LDPMB (Air motor)
Pump tube type
(pump assembly)
: LDPTC (CPVC)
Pump length
: 1000 mm (39"), 1200 mm (47")
Pump design
: Sealless centrifugal
Wetted parts
: CPVC, Carbon filled PTFE, Hastelloy
Discharge options
: 25 mm (1") / 19 mm (3/4") hose barb
Hose
: 1.8 mtrs (6 ft), I.D. 25 mm (1") PVC
Dispensing nozzle
: 25 mm (1"), Polypropylene
Shaft
: Hastelloy
Barrel adapter
: Polypropylene
Storage bracket
: Steel
Max. flow rate
: 69 l/min (18 USgpm) based on water
Max. pressure
: 19.3 mtrs. (63 ft)
Max. temperature
: +88°C (+190°F)
Max. viscosity
: 1000 cps
Max. specific gravity: 1.8
Performance curves
8
12
Q (USgpm)
16
1.5
1
LDP
TC
15
10
0.5
5
0
0
LDPT
with
30
50 Hz
20
H mts.
p (bar)
2
ISO 9906 Annex A
LDPTC: CPVC pump tube
LDPMA: Electric motor
LDPMB: Air motor
60
40
LDP
MA
20
C wit
h LDP
MB
0
0
20
0.2
0.8
25
20
15
10
5
0
0
35
80
LDPTC
Based on water at 21°C (70°F)
p (PSI)
4
H ft.
0
25
40
0.4
0.6
1.6
0.8
2.4
3.2
60
Q (l/min)
1
Q (l/sec)
4
0
3
Q (m /h)
Note: While ordering pump set, please mention ordering code separately for both pump type and motor type. While ordering only pump or only motor,
please mention ordering code for only pump type or only motor type respectively. Type keys for pump type and motor type are available on page 5.
Discharge hose, Trigger nozzle, Strainer, Barrel adapter and Wall bracket have to be ordered separately. Kindly refer page No.12 for part nos.
8
Electric & pneumatic drum pumps
Pump set 3 - PP (Polypropylene)
Drum pumps
Drum pumps for acids and alkalis
Lubi's Polypropylene pump set is engineered for transferring
a various types of corrosive liquids.
Robust Polypropylene construction ensures chemical resistance
against light to slightly aggressive chemicals.
Common applications
• Acetic Acid
• Sulfuric Acid
• Hydrochloric Acid (20%)
• Nitric Acid (20%)
Technical specifications
Motor type
: LDPMA (Electric motor) or LDPMB (Air motor)
Pump tube type
(pump assembly)
: LDPTP (Polypropylene)
Pump length
: 1000 mm (39"), 1200 mm (47")
Pump design
: Sealless centrifugal
Wetted parts
: Polypropylene, Carbon filled PTFE, Hastelloy
Discharge options
: 25 mm (1") / 19 mm (3/4") hose barb
Hose
: 1.8 mtrs (6 ft), I.D. 25 mm (1") PVC
Dispensing nozzle
: 25 mm (1"), Polypropylene
Shaft
: Hastelloy
Barrel adapter
: Polypropylene
Storage bracket
: Steel
Max. flow rate
: 69 l/min (18 USgpm) based on water
Max. pressure
: 19.3 mtrs. (63 ft)
Max. temperature
: +55°C (+130°F)
Max. viscosity
: 1000 cps
Max. specific gravity: 1.8
Performance curves
8
12
Q (USgpm)
16
1.5
1
LDP
TP
15
10
0.5
5
0
0
LDPT
with
P wit
30
50 Hz
20
H mts.
p (bar)
2
ISO 9906 Annex A
LDPTP: Polypropylene pump tube
LDPMA: Electric motor
LDPMB: Air motor
60
40
LDP
MA
20
h LDP
MB
0
0
20
0.2
0.8
25
20
15
10
5
0
0
35
80
LDPTP
Based on water at 21°C (70°F)
p (PSI)
4
H ft.
0
25
40
0.4
0.6
1.6
0.8
2.4
3.2
60
Q (l/min)
1
Q (l/sec)
4
0
3
Q (m /h)
Note: While ordering pump set, please mention ordering code separately for both pump type and motor type. While ordering only pump or only motor,
please mention ordering code for only pump type or only motor type respectively. Type keys for pump type and motor type are available on page 5.
Discharge hose, Trigger nozzle, Strainer, Barrel adapter and Wall bracket have to be ordered separately. Kindly refer page No.12 for part nos.
9
Electric & pneumatic drum pumps
Pump set 4 - PVDF (Polyvinylidene Fluoride) Kynar®
Drum pumps
Drum pumps for concentrated acids and alkalis
Lubi's PVDF pump set is engineered for transferring highly
concentrated and aggressive liquids.
Robust PVDF construction offers excellent durability and
chemical resistance.
Common applications
• Concentrated Nitric Acid
• Sulphuric Acid-66 Baume
• Sodium Hypochlorite
• Hydrofluoric Acid
• Propionic Acid
• Stearic Acid
Technical specifications
Motor type
: LDPMA (Electric motor) or LDPMB (Air motor)
Pump tube type
(pump assembly)
: LDPTK (PVDF)
Pump length
: 1000 mm (39"), 1200 mm (47")
Pump design
: Sealless centrifugal
Wetted parts
: PVDF, Carbon filled PTFE, Hastelloy
Discharge options
: 25 mm (1") / 19 mm (3/4") hose barb
Hose
: 1.8 mtrs (6 ft), I.D. 25 mm (1") Modified Cross Linked Polyethylene
Dispensing nozzle
: 25 mm (1"), PVDF
Shaft
: Hastelloy
Barrel adapter
: Polypropylene
Storage bracket
: Steel
Max. flow rate
: 69 l/min (18 USgpm) based on water
Max. pressure
: 19.3 mtrs. (63 ft)
Max. temperature
: +80°C (+175°F)
Max. viscosity
: 1000 cps
Max. specific gravity: 1.8
Performance curves
8
12
Q (USgpm)
16
1.5
1
LDP
TK
15
10
0.5
5
0
0
LDPT
with
30
50 Hz
20
H mts.
p (bar)
2
ISO 9906 Annex A
LDPTK: PVDF pump tube
LDPMA: Electric motor
LDPMB: Air motor
60
40
LDP
MA
20
K wit
h LDP
MB
0
0
20
0.2
0.8
25
20
15
10
5
0
0
35
80
LDPTK
Based on water at 21°C (70°F)
p (PSI)
4
H ft.
0
25
40
0.4
0.6
1.6
0.8
2.4
3.2
60
Q (l/min)
1
Q (l/sec)
4
0
3
Q (m /h)
Note: While ordering pump set, please mention ordering code separately for both pump type and motor type. While ordering only pump or only motor,
please mention ordering code for only pump type or only motor type respectively. Type keys for pump type and motor type are available on page 5.
Discharge hose, Trigger nozzle, Strainer, Barrel adapter and Wall bracket have to be ordered separately. Kindly refer page No.12 for part nos.
10
Electric & pneumatic drum pumps
Motors
Drum pumps
LDPMA - High speed electric motor (10000 rpm at 50 Hz)
Model
Motor type
Rating
Phase
Voltage
Supply frequency
Rated speed
Enclosure class
Power cord
Duty rating
LDPMA07N
LDPMA07V
High speed electric motor
without variable speed control
0.75 HP (0.55 kW)
1
230 V
50 Hz
10000 rpm
ODP (Open Drip Proof)
6.09 m (20 ft) long
Intermittent
High speed electric motor
with variable speed control
0.75 HP (0.55 kW)
1
230 V
50 Hz
10000 rpm
ODP (Open Drip Proof)
6.09 m (20 ft) long
Intermittent
LDPMB - Air motor
Model
Motor type
Rating
Air consumption
Maximum air inlet pressure
LDPMB07
Air motor
0.75 HP (0.55 kW)
10.4 l/sec @ 6.2 bar
(22 CFM @ 90 psi)
6.8 bar (100 psi)
11
Electric & pneumatic drum pumps
Accessories
Drum pumps
Discharge hose
Discharge hose
Discharge hose
Wall bracket
Part number: LDPA9029
Clear PVC hose
Part number: LDPA9032
Clear Braided PVC hose
Part number: LDPA9044
Chemical hose
Part number: LDPA9006
25 mm x 32 mm (1" I.D. x 1.25" O.D.)
Max. temperature: 66°C (150°F)
Max. operating pressure: 2.1 bar (30 psi)
Material of construction:
Polyvinyl Chloride
25 mm x 32 mm (1" I.D. x 1.25" O.D.)
Max. temperature: 66°C (150°F)
Max. operating pressure: 5.2 bar (75 psi)
Material of construction:
Braided Polyvinyl Chloride
25 mm x 37 mm (1" I.D. x 1.45" O.D.)
Max. temperature: 121°C (250°F)
Max. operating pressure: 14 bar (200 psi)
Material of construction:
Modified Cross - Linked Polyethylene
Stainless steel wall storage
bracket is designed for pump
storage.
Suction strainer
Suction strainer
Suction strainer
Drum
Part number: LDPA9011
Part number: LDPA9012
Part number: LDPA9043
Part number: LDPA9003
Mesh size: 16 x 2.5 mm
(0.63" x 0.098")
Material of construction:
Polypropylene
Mesh size: 14.7 x 1.3 mm
(0.58" x 0.051")
Material of construction:
Stainless steel AISI 316
Mesh size: 16 x 2.5 mm
(0.63" x 0.098")
Material of construction:
PVDF (Kynar®)
Capacity: 56.8 lit. (15 gal.)
Material of construction: HDPE
(High Density Polyethylene )
Barrel adapter
Barrel adapter
Trigger nozzle
Trigger nozzle
Part number: LDPA9015
Part number: LDPA9002
Part number: LDPA9017
Part number: LDPA9028
51 mm O.D. (2")
Material of construction:
Polypropylene
51 mm O.D. (2")
Material of construction:
Stainless steel AISI 304
1” O.D. (25mm) Hose barb intake
1” O.D. (25mm) Hose barb intake
Material of construction:
Polypropylene
Seal Material : Viton*
Material of construction:
PVDF (Kynar®)
Seal Material : Viton*
Note: While ordering accessories, please mention pump tube type, part name, part number, description and quantity in the order.
* EPDM seals are available on request.
12
Drum hand pumps
LDPHN, LDPHP
Drum pumps
Introduction
The Lubi LDPHN & LDPHP series are thermoplastic, hand
operated, self-priming and double-action piston drum pumps,
which delivers liquids on forward as well as reverse stroke.
It takes less than six cycles to yield a gallon (3.8 litres).
i.e 22 oz. (0.650 literes) per stroke.
Pumps have vertical suction and horizontal discharge port.
The two position handle may be mounted either above or
below the pump. The handle can be padlocked to prevent
unauthorized dispensing. A built-in siphon breaker prevents
unwanted flow when pumping is stopped. It will operate wet
or dry without damage. Unlike ordinary metal hand pumps,
it will even handle fresh or salt water. Rust is no problem
here! This type of pump can be used for chemically
compatible liquids at temperatures up to 54°C (130°F) and
having maximum viscosity of 200 CPS (1,000 SSU). These
pumps are designed for farms, construction sites and
manufacturing plants.
Features and benefits
•
•
•
•
These pumps are available in two material variants:
• Nylon (LDPHN)
• Polypropylene (LDPHP)
•
Nylon drum pump is designed for the transfer and dispensing •
of liquids within a pH range of 7 to 9. These includes many
•
lubricants, oils, detergents and aromatic materials which are
compatible with pump component materials.
•
Polypropylene drum pump is designed for transfer and
dispensing of liquids within a pH range of 4 to 11. These
includes many organic acids, alcohols and water soluble
inorganic chemicals which are compatible with pump
component materials.
•
•
•
Technical specifications
CAUTION: Chemical compatibility of a pump should be
always checked for each liquid by chemical name. No one
pump can be universally chemical resistant.
Model
Type
LDPHN - Nylon
Double-action piston
hand operated pump
1" NPT
Inlet
Outlet
3/4" NPT
Nylon
Spout
Nylon
Nozzle
Nylon
Pump housing
Nylon/Viton/Teflon
Piston
Piston rod
S.S AISI 316
Nylon/Viton
Valves
Viton
Vacuum breaker
Nylon
Cover plate
Stainless Steel
Fastener (external)
Max. flow rate
3.8 litre/6 cycles
(0.650 litre/stroke)
54°C (130°F)
Max. temp. (water)
7 to 9
pH range
2-Piece Nylon (std.)*
Suction tube
2.4 mtrs (8 ft) Nylon
Discharge hose
2" Nylon bung adapter
Mounting
208 lit. (55 gal.) drums
For use on
Gasket
Cork/Nitrile
NOTE: Both Nylon & Polypropylene pumps are made in the
same style and has the same action. They vary only in their
materials of construction, consisting of specific polymers and
elastomers for resistance to certain types of chemicals.
Applications
LDPHN & LDPHP pumps are used for pumping out liquids
from drums, barrels and totes, etc.
These are widely used by different sectors such as:
•
•
•
•
•
•
•
•
•
•
High quality components
Light weight, portable
Easy to install, user friendly operation
Safe chemical transfer, an alternative to manual - minimizes
danger of spills, vapors, burns, health, environmental,
liability concerns
Delivers liquids on both forward and reverse strokes
Ergonomically designed handle
Two position pump handle can be mounted above or below
the pump
Tamper proof handle can be padlocked to protect against
unauthorized use
Self lubricating Teflon piston ring operates wet or dry for
long life
Supplied with bung adapter suitable for MS/Plastic drum
Few parts - maintenance friendly.
Chemical plants
Food processing plants
Packaging plants
Plating
Semiconductor
Waste water treatment
Pharmaceutical
Laboratories
Automotive industries
Agriculture.
LDPHP - Polypropylene
Double-action piston
hand operated pump
1" NPT
3/4" NPT
Polypropylene
Polypropylene
Polypropylene
Polypropylene/Viton/Teflon
S.S AISI 316
Polypropylene/Viton
Viton
Polypropylene
Stainless Steel
3.8 litre/6 cycles
(0.650 litre/stroke)
54°C (130°F)
4 to 11
2-Piece Polypropylene (std.)*
2.4 mtrs (8 ft) Polypropylene
2" Polypropylene bung adapter
208 lit. (55 gal.) drums
Cork/Nitrile
* 3 or more pieces are also available as on request at additional cost.
13
Heavy-duty electric drum pumps (Auger type)
LDPPA
Drum pumps
Introduction
The Lubi LDPPA series are heavy-duty, electric operated,
auger type and self-priming drum pumps, which provides a
safe and accurate way to transfer liquids from drums,
containers, tanks and totes.
Pumps have vertical suction and horizontal discharge port.
They are designed to transfer clean, non-abrasive, nonflammable and non-explosive liquids that are compatible
with pump materials.
The motor is isolated from liquid by a mechanical seal made
out of Teflon with a Viton O-ring. The pump has an outer
shaft which are made out of stainless steel AISI 316.
Pumps are driven by continuous duty electric motor rotating
at 2900 rpm. The motor has shielded, prelubricated ball
bearings that reduce maintenance requirements.
LDPPA drum pumps eliminate the need to turn over barrels
or drums to remove the liquid inside.
Applications
LDPPA pumps are used for pumping out liquids from drums,
barrels, large storage vessels, stainless steel tanks, totes, etc.
Drum pumps are widely used by different sectors such as:
•
•
•
•
•
•
•
•
•
•
Chemical plants
Food processing plants
Packaging plants
Plating
Semiconductor
Waste water treatment
Pharmaceutical
Laboratories
Automotive industries
Agriculture.
Technical specifications
Model
Features and benefits
Following are the main features and benefits offered by
the LDPPA drum hand pumps.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High quality components
Light weight, portable
Easy to install, user friendly operation
Ergonomically designed handle
Safe chemical transfer, an alternative to manual - minimizes
danger of spills, vapors, burns, health, environmental,
liability concerns
Teflon internal parts to handle various types of tough liquids
Made out of stainless steel AISI 316
Pulsation free
Inherent flooded suction
Operates by continuous duty AC electric motor
Supplied with bung adapter suitable for MS/Plastic drum
Few parts - maintenance friendly
Long lasting
Pumps liquids with viscosity up to 5000 cps.
14
Motor type
Rating
Phase
Voltage
Supply frequency
Rated speed
Enclosure class
Power cord
Duty rating
Motor bearings
Pump body
Shaft
Discharge port
Adaptor
O-ring
Seal
Auger
Impeller
Inlet
Outlet
Suction tube
Discharge hose
For use on
Max. flow rate
Max. head
Max. temperature
Max. viscosity
LDPPA
Capacitor start type, thermally protcted
0.33 HP/0.25 kW
1
230 V
50 Hz
2900 rpm
TEFC (Totally Enclosed Fan Cooled)
2.4 m (8 ft) long
Continuous
Ball, prelubricated and shielded
Stainless steel AISI 316
Stainless steel AISI 316
Stainless steel AISI 316
Polypropylene
Viton
Teflon
Teflon
Teflon
1½"
3/4"
900 mm (35½") long
EPDM - 1.8 mtrs. (6 ft), I.D. 25 mm (1")
208 lit. (55 gal.) drums
40 l/min (10.5 USgpm) based on water
3.8 mtrs. (12.5 ft)
+60°C (140°F)
5000 cps
Air-driven piston drum pumps
LDPPP
Drum pumps
Introduction
The Lubi LDPPP series are compressed air-operated,
piston reciprocating, medium pressure, self-priming drum
pumps, which are suitable for high flow transfer at short
distance of low to medium viscous liquids, lubricants,
chemicals, adhesive, varnishes, cosmetics and other
suitable fluids.
These pumps have 1:1 pressure ratio. This means that the
air pressure from compressor into the pump is equal to the
fluid pressure coming out of the pump.
These pumps can be supplied as separate unit or as
complete systems with all the necessary elements for proper
installation.
These pumps may be mounted on mobile units, drums,
tanks or walls, by using the appropriate accessories.
Pumps have vertical suction and horizontal discharge port.
LDPPP drum pumps eliminate the need to turn over barrels
or drums to remove the liquid inside.
NOTE: These pumps are designed and intended for transfer
only and do not reliably stall under pressure when used as a
demand pump. They must be controlled with a valve on the
air inlet.
Applications
LDPPP pumps are used for pumping out liquids from drums,
barrels, large storage vessels, stainless steel tanks, totes, etc.
These are widely used by different sectors such as:
•
•
•
•
•
•
•
•
•
•
Technical specifications
Chemical plants
Food processing plants
Packaging plants
Plating
Semiconductor
Waste water treatment
Pharmaceutical
Laboratories
Automotive industries
Agriculture.
Model
Type
Features and benefits
Following are the main features and benefits offered by
the LDPPP air-driven piston drum pumps.
• High quality components
• Light weight, portable
• Safe chemical transfer, an alternative to manual - minimizes
danger of spills, vapors, burns, health, environmental,
liability concerns
• Operates at very low pressure. Starting air pressure is
2 kgf/cm²
• Provided with air flow control valve.
• Supplied with bung adapter suitable for MS/Plastic drum
• Ideal for low to medium viscous liquids
• Stainless steel construction with Teflon seals
• Few parts - maintenance friendly
• Long lasting
• Pumps liquids with viscosity up to 3500 cps.
15
Pressure ratio
Max. air pressure
Min. air pressure
Air consumption
Burst pressure
Air inlet size
Fluid outlet size
Drum adapter
Pump body
Seal
Wetted parts
Suction tube
For use on
Max. flow rate
Max. fluid pressure
Max. temperature
Max. viscosity
LDPPP
Air-opertaed, piston reciprocating,
liquid transfer drum pump
1:1
9.8 bar (142 psi)
2 bar (28.5 psi)
12.36 CFM (350 l/min)
Min. 69 bar (1000 psi)
1/4"
3/4" NPT
2"
Stainless steel
Teflon
Stainless steel, Nickel-plated steel, Nitrile rubber
950 mm (37½") long
208 lit. (55 gal.) drums
38 l/min (10 USgpm) based on water
9.8 bar (142 psi)
+60°C (140°F)
3500 cps
Vacuum pumps
LDPPV
Drum pumps
Introduction
The Lubi LDPPV series are compressed air operated,
universal liquid vacuum pumps, which are used for removing
shop floor liquids such as cutting fluids, waste oil, waste water,
paint sludge, contaminated liquids, etc.
Rust proof Aluminum pump body. These pumps are supplied
complete with suction hose and air connection kit for proper
installation.
Pumps have horizontal suction and vertical discharge port.
They are designed to transfer clean, non-abrasive, nonflammable and non-explosive liquids that are compatible
with pump materials.
Applications
LDPPV pumps are used for removing shop floor liquids such
as cutting fluids, waste oil, paint sludge, contaminated liquids
which are compatible with pump material.
Technical specifications
Model
These are widely used by different sectors such as:
Type
•
•
•
•
•
•
•
•
•
•
Inlet
Outlet
Max. air pressure
Min. air pressure
Air consumption
Air inlet size
Drum adapter
Pump body
Max. temperature
Max. viscosity
Laboratories
Chemical plants
Food processing plants
Packaging plants
Plating
Semiconductor
Waste water treatment
Pharmaceutical
Automotive industries
Agriculture.
Features and benefits
Following are the main features and benefits offered by
the LDPPV vacuum pumps.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High quality components
Compact, portable
Installs quickly
No electricity required
Low cost - fraction of the cost of shop vac
Safe chemical transfer, an alternative to manual - minimizes
danger of spills, vapors, burns, health, environmental,
liability concerns
Automatic shuts off when receiving container is full
Supplied with bung adapter suitable for MS/Plastic drum
Rust proof Aluminum pump body
No moving parts
Few parts - maintenance friendly
Quiet operating universal pump can handle most fluids
Long lasting
Pumps liquids with viscosity up to 1400 cps.
Suction hose is provided with the pump.
16
LDPPV
Air-opertaed,
liquid vacuum pump
1" NPT
1"
6.9 bar (100 psi)
4.1 bar (60 psi)
2.36 CFM (350 l/min)
1/4"
2"
Rustproof Aluminum
+60°C (140°F)
1400 cps
Pail pumps
LDPPB
Drum pumps
Introduction
The Lubi LDPPB series are thermoplastic, hand operated,
self-priming, piston action Pail pumps, which delivers liquids
on forward stroke.
Pumps have vertical suction and horizontal discharge port.
They are designed to transfer clean, non-abrasive, nonflammable and non-explosive liquids that are compatible
with pump materials.
LDPPB Pail pumps eliminate the need to turn over Pails to
remove the liquid inside.
Applications
LDPPB pumps are used for pumping out liquids which are
compatible with pump material.
These are widely used by different sectors such as:
•
•
•
•
•
•
•
•
•
•
Technical specifications
Laboratories
Chemical plants
Food processing plants
Packaging plants
Plating
Semiconductor
Waste water treatment
Pharmaceutical
Automotive industries
Agriculture.
Model
Type
Pump body
Wetted parts
Discharge tube
Adapter
Inlet
Outlet
Discharge tube
outlet OD size
Discharge tube
length
Suction tube length
For use on
Max. flow rate
Max. temperature
Max. viscosity
Features and benefits
Following are the main features and benefits offered by
the LDPPB Pail pumps.
• For use with 20 lit. (5 gal.) Pails
• Durable piston action pump deliver 1 oz. per stroke
• High quality components
• Light weight, portable
• User friendly operation
• Safe chemical transfer, an alternative to manual - minimizes
danger of spills, vapors, burns, health, environmental,
liability concerns
• Supplied with bung adapter
• Ideal for low to medium viscous liquids
• Few parts - maintenance friendly
• Pumps liquids with viscosity up to 200 cps.
17
LDPPB
Hand operated
piston action drum pump
Polypropylene
Polyethylene, Polypropylene
Polyethylene
Polypropylene
5/8"
1/4"
1/4"
2¼"
15"
20 lit. (5 gal.) Pails
0.03 litre/stroke (1 oz./stroke)
+50°C (122°F)
200 cps
Gallon pumps
LDPPG
Drum pumps
Introduction
The Lubi LDPPG series are thermoplastic, hand operated,
self-priming, piston action Gallon pumps, which delivers liquids
on forward stroke.
Pumps have vertical suction and horizontal discharge port.
They are designed to transfer clean, non-abrasive, nonflammable and non-explosive liquids that are compatible
with pump materials.
LDPPG Gallon pumps eliminate the need to turn over jugs to
remove the liquid inside.
Applications
LDPPG pumps are used for pumping out liquids which are
compatible with pump material.
These are widely used by different sectors such as:
•
•
•
•
•
•
•
•
•
•
Technical specifications
Laboratories
Chemical plants
Food processing plants
Packaging plants
Plating
Semiconductor
Waste water treatment
Pharmaceutical
Automotive industries
Agriculture.
Model
Type
Pump body
Wetted parts
Discharge tube
Adapter
Inlet
Outlet
Discharge tube
outlet OD size
Discharge tube
length
Suction tube length
For use on
Max. flow rate
Max. temperature
Max. viscosity
Features and benefits
Following are the main features and benefits offered by
the LDPPG Gallon pumps.
• For use with 4 lit. (1 gal.) jugs
• Durable piston action pump deliver 1 oz. per stroke
• High quality components
• Light weight, portable
• User friendly operation
• Safe chemical transfer, an alternative to manual - minimizes
danger of spills, vapors, burns, health, environmental,
liability concerns
• Supplied with bung adapter
• Ideal for low to medium viscous liquids
• Few parts - maintenance friendly
• Pumps liquids with viscosity up to 200 cps.
18
LDPPG
Hand operated
piston action drum pump
Polypropylene
Polyethylene, Polypropylene
Polyethylene
Polypropylene
5/8"
1/4"
1/4"
2¼"
11"
4 lit. (1 gal.) jugs
0.03 litre/stroke (1 oz./stroke)
+50°C (122°F)
200 cps