MENG 231 ENGINEERING MECHANICS (STATICS AND DYNAMICS)
COURSE OUTLINE
SPRING-2009
COURSE
: MENG 231 (3,1) 3 ENGINEERING MECHANICS (STATICS & DYNAMICS)
INSTRUCTOR
: Assoc. Prof. Dr.ERBIL AKBIL
Room: ME 200-B
: One Hour After Each Class (other times by appointment)
Phone: 630 1045
E-Mail: erbil.akbil@emu.edu.tr
OFFICE HOURS
ASSISTANT
: XXXXXXX
E-Mail:
CLASS SCHEDULE:
GROUP 01:
Office Phone
Office
: (630) XXXX
: ME XXX
Period
Day
Room
1, 2
TUESDAY
ME-111
3
TUESDAY
ME 200 B
1, 2
THURSDAY
ME 112
3
THURSDAY
ME 200 B
_______________________________________________________________
Lecture/Tutorial
LECTURE
OFFICE HOUR
LECTURE
OFFICE HOUR
CATALOG DESCRIPTION
MENG 231 ENGINEERING MECHANICS (3, 1) 3
PART-I: STATICS: Review of Vector Algebra; Principles of Mechanics; Free-Body
Diagrams; Static Equilibrium of Particles and Rigid Bodies; Distributed Force Systems.
Structures, Beams, Trusses, Frames, and Cables; Friction; Center of Mass, Centroid,
and Moment of Inertia.
PART-II: DYNAMICS: Review of Particle Dynamics; Free-Body Diagrams; Force,
Energy and Momentum Methods; Planar Kinematics and Kinetics of Rigid Bodies;
Energy Methods; Vibration Problems.
(PREREQUISITES: MATH 151, PHYS 101)
TEXTBOOK:
We will follow, Hibbeler’s “Engineering Mechanics-Statics and Dynamics, 10th. Ed.,
Prentice-Hall” as a textbook. Taking notes in class will be helpful for the ‘Open-NotesOnly Exams’ that you may have. Having a book, however, provides several additional
advantages.
REFERENCES:
1) Engineering Mechanics-Dynamics by B. FOWLER, SI Ed., Addison- Wesley
2) Engineering Mechanics-Statics by B. FOWLER, SI Ed., Addison-Wesley
3) Engineering Mechanics, Statics and Dynamics, 5TH. ED., E.W. NELSON, Schaum’s
Outlines.
TEACHING TECHNIQUES:
Over-head projector and chalk-and-board (Dry-Marker) will both be used in classroom
presentations. For some sections of the course, Power Point presentations will also be utilized.
Tutorials will be organized to establish a closer contact with students and help enhance their
problem solving capabilities.
MINIMUM STUDENT MATERIAL:
Assigned Textbook, a scientific calculator, binder for handouts and class notes, sufficient amount of A4 size plain papers or a notebook dedicated to this course only, and three pens/pencils of different
colours. The Class-Notes Binder will be collected together with your Final Exam and shall be graded.
You may take the binder back after it is graded.
1
MENG 231 ENGINEERING MECHANICS (STATICS AND DYNAMICS)
COURSE OUTLINE
COURSE OBJECTIVES:
THE MAIN PURPOSE OF THIS COURSE IS
1.
2.
3.
4.
5.
6.
7.
TO PROVIDE THE STUDENT WITH A CLEAR AND THOROUGH UNDERSTANDING OF
THE THEORY AND APPLICATIONS OF ENGINEERING MECHANICS, COVERING BOTH
STATICS AND DYNAMICS; AND IN THIS CONTEXT;
TO PROVIDE THE STUDENT WITH A THOROUGH UNDERSTANDING OF THE
CONCEPT, DRAWING, AND THE USE OF FREE-BODY DIAGRAMS (WHICH IS
ABSOLUTELY ESSENTIAL WHEN SOLVING PROBLEMS IN MECHANICS.)
TO PROVIDE A MEANS FOR DEVELOPING THE STUDENT’S ABILITY TO FORMULATE
EQUILIBRIUM EQUATIONS;
TO PROVIDE THE STUDENT WITH GOOD PROBLEM SOLVING SKILLS;
TO PROVIDE THE STUDENT WITH THE FUNDAMENTAL CONCEPTS AND METHODS
OF STATICS AND DYNAMICS;
TO ENHANCE STUDENT’S CREATIVITY AND IMAGINATION AS WELL AS
KNOWLEDGE AND SYSTEMATIC THINKING CAPABILITIES AS REQUIRED BY THE
ENGINEERING DISCIPLINE.
TO PROVIDE THE STUDENT WITH SIMPLE DESIGN AND SAFETY IDEAS.
COURSE OUTCOMES:
THE STUDENT TAKING THIS COURSE WILL BE ABLE TO
1.
2.
3.
4.
5.
6.
7.
UNDERSTAND THE BASIC PRINCIPLES OF MECHANICS AND TO APPLY THEM TO
REAL-LIFE PROBLEMS OR TO NEW SITUATIONS.
DRAW FREE-BODY DIAGRAMS
FORMULATE AND USE THE EQUILIBRIUM EQUATIONS
IDENTIFY THE PRINCIPLES AND EQUATIONS THAT APPLY, AND USE THEM IN
SOLVING STATIC AND DYNAMIC PROBLEMS.
USE THE MATHEMATICAL TOOLS AND THE STANDARD PROCEDURES AS WELL AS
PERFORMING NUMERICAL CALCULATIONS.
ANALYZE ONE, TWO AND SOME THREE DIMENTIONAL FORCE SYSTEMS AND TO
DETERMINE
THE
RESULTANT
OF
FORCE
SYSTEMS;
INCLUDING
MOMENTS/COUPLES, REACTIONS, AND INTERNAL LOADS.
DEVELOP EQUATIONS OF EQUILIBRIUM AND EQUATIONS OF MOTION, AND SOLVE
THESE FOR FORCES AND/OR DIFFERENT MOTION PARAMETERS, SUCH AS
DISPLACEMENT, VELOCITY, AND ACCELERATION OF PARTICLES, RIGID BODIES,
AND SIMPLE MECHANICAL SYSTEMS.
GRADING AND EVALUATION:
Class-Notes & Participation:
Homeworks and Assignments:
Quizzes:
Midterm(s):
Final Exam:
4%,
10 %,
20 %,
30 %,
36 %.
ATTENDANCE:
Attendance to lectures and tutorials are essential and expected. Attendance shall be taken. You must be there
to participate. If you miss more than one midterm/monthly exams and/or quizes or if your attendance record
is less than 75 %, your condition may be treated as “Non-Gradable” and shall receive an “NG” grade.
PLAGIARISM
This is intentionally failing to give credit to sources used in writing regardless of whether they are published
or unpublished. Plagiarism (which also includes any kind of cheating in exams) is a disciplinary offence and
will be dealt with accordingly.
2
MENG 231 ENGINEERING MECHANICS (STATICS AND DYNAMICS)
COURSE OUTLINE
COURSE CONTENTS
WEEK #
TOPICS
PART-A: STATICS
5.
Introduction: Scope and general principles; Newton’s Laws; units and dimensions.
Vectors; manipulating vectors in terms of components; dot and cross products; mixed
triple products.
Forces: Types of forces; equilibrium and free-body diagrams; two-dimensional force
systems; three-dimensional force systems; system of forces and moments the moment
vector; moment of a force about a line; couples; equivalent systems
Static Equilibrium: The equilibrium equations; 2-D applications; statically
Indeterminate objects; 3-D applications; two-force and three-force members
Trusses and Frames: Trusses; the method of joints; the method of sections. Frames
and Machines.
Centroids and Centers of Mass; Moments of Inertia; Parallel-Axes Theorem.
6.
*** 1ST. MIDTERM EXAMINATION (EXAM WEEK)***
7.
Distributed forces; internal forces and moments in beams; shear force and bending
moment diagrams of beams; cables and belts.
Friction: Theory of dry friction; coefficients of friction; angles of friction; applications.
Energy and work methods; potential energy; virtual work.
1.
2.
3.
4.
8.
PART-B: DYNAMICS
9.
10.
11.
Kinematics of a particle: Studying the motion of a particle; continuous motion;
curvilinear motion; rectangular, normal, tangential, cylindrical components of motion.
Absolute dependent motion and relative-motion of two particles.
Kinetics of a particle: Newton’s Law of motion; equations of motion; work and
energy; principle of work and energy; work of a force; power and efficiency;
conservative forces and potential energy; conservation of energy.
Impulse and momentum: Linear impulse and momentum; conservation of linear
momentum ; impact; angular momentum; angular impulse and momentum
*** 2ND MIDTERM EXAM ( A 90-MINUTES OPEN-NOTES EXAM) ***
12.
13.
14.
Planar Kinematics of a Rigid Body: Translation; rotation about a fixed axis; general
plane motion; relative motion; relative velocity and acceleration; instantaneous center.
Force and Acceleration: Moment of inertia; equations of motion; translation, rotation,
and general plane motion.
Work and Energy: Kinetic energy; the work of a force; work of a couple. Principle of
work and energy; conservation of energy.
15.
General Revision
16.
***FINAL EXAMINATIONS: (A TWO-HOURS EXAM)***
3
MENG 231 ENGINEERING MECHANICS (STATICS AND DYNAMICS)
COURSE OUTLINE
HOMEWORKS & ASSIGNMENTS: (YOU WILL BE ASSIGNED ABOUT 8 SETS OF HOMEWORKS)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
ALL HOME WORK MUST BE PRESENTED ON A-4 SIZE WHITE-PLAIN PAPERS.
THE FIRST PAGE WILL BE THE ‘TITLE PAGE’, WHICH WILL INCLUDE: CODE AND
NAME OF THE COURSE, ASSIGNMENT NUMBER (SUCH AS HOMEWORK NO.2 ETC.),
STUDENT NUMBER & NAME (e.g. SUBMITTED BY # 981234 ALI BERK TANSAY) , AND
DATE DUE (e.g. APRIL 7TH. 2008, MONDAY).
LEFT MARGIN 3.0 CM; RIGHT AND OTHER MARGINS AT THE TOP AND BOTTOM
MUST BE 2.5 CM IN WIDTH, AND NOTHING WILL BE WRITTEN WITHIN THESE
SPACES.
START EACH PROBLEM ON A NEW PAGE UNLESS IT IS A SHORT ONE. YOU DO NOT
HOWEVER NEED TO START FROM A NEW PAGE FOR DIFFERENT SECTIONS OF A
PROBLEM.
WRITE DOWN THE PROBLEM STATEMENT, COMPLETE WITH THE NECESSARY
SKETCHES, AND IDENTFY WHAT IS GIVEN AND WHAT IS TO BE FOUND.
EXPLAIN CALCULATION SEQUENCE IN WORDS (i.e., DO NOT SIMPLY WRITE DOWN
A SERIES OF EQUATIONS.
WHEN EQUATIONS ARE USED EACH SYMBOL IN THE EQUATION NEED TO BE
DEFINED.
SHOW ACTUAL CALCULATED RESULTS TO SUFFICIENT DECIMALS BEFORE
ROUNDING OFF.
SHOW DETAILS FOR YOUR CALCULATIONS AND IDENTIFY (LABEL) YOUR
ANSWERS WITH A BOX. --NEVER SHOW A RESULT WITHOUT SHOWING THE
ALGEBRAIC SUBSTITUTIONS FIRST.
FOR ALL GRAPH AND VECTOR DIAGRAMS, LABEL THE AXES AND WRITE DOWN
THE SCALES USED AND UNITS FOR EACH PARAMETER.
USE UNITS CONSISTENTLY IN ALL YOUR ANALYSIS, FORMULATIONS AND
CALCULATIONS.
NUMBER EACH PAGE CONSECUTIVELY AND STAPLE ALL PAGES TOGETHER IN
THE PROPER ORDER.
YOU MUST AIM TO ACHIEVE NEAT, CLEAR, AND PROFESSIONAL LIKE WORK.
EACH HOMEWORK WILL BE GRADED ON A 100 POINT SCALE AS:
a. NEATNESS = 15 POINTS;
b. FORMAT AND COMPLETENESS = 20 POINTS;
c. CONCEPT AND APPROACH = 50 POINTS; AND
d. MATHEMATICS = 15 POINTS.
OTHER NOTES:

SOME EXAMS MAY BE OPEN-NOTES ONLY.

TAKING NOTES IN CLASS, THEREFORE, IS STRONGLY RECOMMENDED!

YOU MUST HAVE YOUR BOOKS AND NOTES WITH YOU READY FOR ANY POPQUIZES. YOU MAY ALSO NEED A SCIENTIFIC CALCULATOR, PENS/PENCILS AND
ERASERS AS WELL.

UNLESS OTHERWISE STATED, EXCEPT THE GROUP-WORKS, INDIVIDUAL WORK
IS ESSENTIAL! YOU CAN ALWAYS STUDY TOGETHER, BUT YOU MUST SUBMIT
YOUR OWN HOMEWORK.

NO COPYING FROM OTHERS!

NO LATE SUBMISSION OF HOMEWORKS AND/OR ASSIGNMENTS!

HOMEWORKS WILL BE COLLECTED 5 (FIVE) MINUTES AFTER THE CLASS HAS
BEGUN. ANY ASSIGNMENT NOT IN THIS COLLECTION WILL BE CONSIDERED
LATE. ALL LATE WORK WILL RESULT IN THE FOLLOWING DEDUCTIONS:
o
LESS THAN 24 HOURS LATE = 50 % DEDUCTION;
o
OVER 24 HOURS LATE
= 100 % DEDUCTION.

IF YOU ARE TO BE ABSENT DUE TO ANY ACCEPTABLE REASON THE WORK MUST
BE SUBMITTED EARLY AND DIRECTLY TO THE INSRUCTOR.
KEEP THIS OUTLINE AS A REFERENCE DOCUMENT
WITHIN YOUR COURSE/CLASS-FILES.
4
MENG 231 ENGINEERING MECHANICS (STATICS AND DYNAMICS)
COURSE OUTLINE
EASTERN
EASTERN MEDITERRANEAN UNIVERSITY
FACULTY OF ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING
MENG 231 ENGINEERING MECHANICS
(SPRING 2008-2009)
HOMEWORK ASSIGNMENT NO: ??
Submitted to:
Assoc. Prof. Dr. Erbil AKBIL
QUESTION
GRADE
TOTAL:
Submitted by : # (050023) Albert Einstein, Jr.
(your student number & name)
Due Date
: APRIL 19th. 2009
Date Submitted: APRIL 19TH 2009
___________________________________________________________________
NOTES:
1) This Title Page must be prepared by using Word!
2) Be sure to leave margins from the top, bottom, and the sides.
3) Do not write within these spaces.
4) The left margin should be 30-mm and the others as 25-mm.
5) Each assignment, homework, or project report must be submitted
with a ‘Title Page’ similar to this example.
6) Every page of the submitted work must have its margins. (Drawing the margins is
not essential, but the marginal spaces must be there!)
7) Hand written title pages will not be accepted!
5