Alexandru Mihai Teodorescu
26 Northey Dr., Toronto, Ontario, M2L 2S9
Alexandu.Teodorescu@alex-theo.com
416-510-9094
Experience
Daimler Buses North America, Toronto, (April 2009 – Present)
Mechanical Designer - contract

Responsible with implementation of the TRW electric power steering assistance on the new
EPA10 bus. Make the visibility study in the dashboard.

Review and redesign the components of CNG (compressed natural gas) system for the new
EPA10 bus.
AIOLOS Engineering, Toronto, (October 2008 – April 2009)
Mechanical Designer - contract

Wind tunnel – Daimler AG project – mechanical design of wind tunnel components,
Collector, Test Section Diffuser and Turning Vane Corner No. 1

Create 3 D models and 2D drawing with the wind tunnel components.

Develop the mechanical structure of the Collector, Test Section Diffuser with Adjustable Flap
and moving Turning vane Corner No.1 in collaboration with aerodynamic engineer and
mechanical engineer.
Daimler Buses North America, Toronto, (July 2006 – October 2008)
Mechanical Designer - contract

Develop, prototyping and support testing and production.

Responsible from Concept Team EPA10 with develop new air reservoirs, calculate the air
necessary in the air brake system, new solution for mounting and routing the air lines and
prototype all the new solutions.

Responsible with air brake system, redesign air dryer compartment and standardized this
compartment that contents three different setups of air dryers (Graham-White, Bendix air
dryer with Consep Valve, Chicago Rawhide HD 2000/ Turbo 2000 with Consep Valve).

Responsible with the new design for air brake system including air dryer compartment, and
all air lines which connected all other air systems for the new Orion VII NG buses.

With the new design for air system I reduced production time by 20%. Improved the kneeling
system and reduced the production time installation with 75%.
Siemens Power Generation, Hamilton, (March 2005 – March 2006)
Pro/E models and drafting

Interpret client specification and process intention for a new gas turbine and apply to the
design and drawing used Pro/ENGINEER 2001 and Wildfire 2.0.

Responsible to make solid models of inlet cylinder, turbine cylinder and exhaust cylinder.
Create drawing for hydraulic and torque tensions.

Pro/E support for other members of team.
AT Enterprises, Lörrach, Germany (May 2002 – December 2004)
Mechanical Designer

Consulting projects: Model rails and connecting elements for transfer rollers conveyor
system.
Pro/ENGINEER, SolidWorks design/drafting detailing for clients projects.

Used advanced assemblies techniques in Pro/ENGINEER: skeletons, external references
and layouts.

Created drawings and detailing for piece parts, assemblies and sub-assemblies using
SolidWorks.

Created 3D models for solid components (piping, connecting elements, rollers), sheet
metals components.

Able to interpret client specification and process intention and apply to the design effort from
conceptual layout to detailed design.

Worked successfully on all of these projects under tight deadlines and was praised for very
accurate and forward-looking work done under pressure. My contribution has improved the
overall acceptance of the projects.

Thorough knowledge of GD & T, surface finish requirements, bills of materials, welding
symbols, comfortable with complex blueprints / layouts.
Cambric Consulting, Brasov, Romania (September 1999 – April 2002)
Mechanical Designer

Created detailed solid (pistons, cylinder liners, exhaust, rods, bearings, covers gears,
cylinder heads, impeller and casing) plastic casting and sheet metal component; built
assemblies (cylinder heads assemblies), designed elements and produced fully documented
production drawings.

Mold models and process for analyzing design models for mold-ability through to the
creation of core and cavity components, mold base assemblies, and drawing documentation
for manufacturing.

Created piece part and assembly specifications including BOM’s.

Built an assemblies using skeleton model, controlling design parameters used layouts,
interchange assemblies.

Reviewed 3D models, 2D drawings and tolerances for accuracy.

Solid pipe defined pipeline parameters and created piping assemblies.

Produced detailed reports that automatically update changes to design tables.

Defined joining requirements for welded parts and assemblies.

Designed and created drawings for piece parts, assemblies and sub-assemblies using
Pro/ENGINEER and Pro/SHEETMETAL.

Converted existing 2D drawings into Pro/ENGINEER models and drawings.

Analyze interference in the Pro/ENGINEER assembly.

Cambric Consulting, Brasov, Romania (October 1998 – September 2002)
Drafter Manager

Planned and managed the work of a team of 12 Drafter Engineers to execute projects for
John Deere, Gould Pumps, and Schindler Lifts.

Gained a thorough understanding of the work instructions associated with a specific project
and ensured that all members of the engineering team understand and used these
instructions in their work.

Established the conversion process appropriate to each project and oversaw
implementation.

Planned the project execution to respect the delivery terms assigned to each production
work order.

Managed the day to day date conversions activities for the entrusted projects.

Supervised the performance of quality control in the production process.

Worked with the engineering team to provide and constantly improve the quality of the
services supplied by Cambric Consulting according to the instructions supplied by the
customers and Cambric Corporation.


Issued IRs (Information Requests) on behalf of team and kept track of responses from
Cambric Corporation.
Responsible for data exchanges (transmission, respecting picking up files).
Cambric Consulting, Brasov, Romania (May 1998 – September 1998)
Drafter

Performed draft design for naval and automotive industries in AutoCAD v10, v12 and v14.

Convert 2D drawings in 3D models.

Worked with the team to provide and improve the quality of the services supplied by
Cambric Consulting according to the instructions supplied by the customer.

Created complex drawings from a variety of source documents.
Education
Transylvania University, Brasov, Romania
Bachelor of Mechanical Engineer
Skills & Additional Information







Worked with Pro/ENGINEER & AutoCAD 10 years+ and SolidWorks.
Experience in reverse engineering (detail design), BOM, assemblies.
Excellent team player, self motivated, energetic, responsible, dedicated, flexible, driven to
improve and drives results.
Proficient in: Pro/ENGINEER (19 to Wildfire 2.0), AutoCAD (v2.6 to v2005), SolidWorks
2004.
Work experience in designing electrical pumps, turbines, electric, motor parts, electrical
circuits and components, gas turbine components, cylinder and power generating systems,
parts & laser's assemblies, casting components.
New designs and collaborative projects for automotive, truck and tractor engine, heavy
equipment parts and assemblies.
Worked with some of the world’s largest and most prestigious companies: Siemens Power
Generation, Emerson Electric, John Deere & co., Caterpillar, General Motors, Goulds
Pumps, Peterbilt, Pratt & Whitney and Delphi, Axcelis Technologies (Eaton Corporation
subsidiary).