图书情报专题研究
最新学科研究热点与前沿
2013 年第 3 期
西北工业大学图书馆
2013 年 9 月
前
言
《图书情报专题研究》的宗旨是为我校师生开展学术研究提供有价值的参
考信息。此项工作由图书馆信息咨询与情报研究部承担，根据学校所购买的数字
资源，通过分析其深层次的功能，从数据库中组织整理出了与我校学科领域相关
的最新学科热点研究论文、最新研究前沿及最新国际会议信息等，以期能对我校
师生开展学术研究、项目立项、开题等学术研究活动提供帮助。
本期，我们收集整理了如下七个方面的热点文献和前沿信息：
1. Elsevier Science Direct Top 25，Elsevier 数据库下载次数最多的 25 篇论
文。
2. IEL Top20，IEL 数据库下载最多的 20 篇论文。
3. ACM 最新会议。根据 ACM 主页所提供的最新会议信息整理所得，可
供研究者参考未来将要召开的会议内容等信息。
4. AIAA 最新会议，由 AIAA 主站提供的最新会议信息，以供研究者参考
所用。
5.IEEE 最新会议，由 IEEE 主站提供的最新会议信息，供相关研究者参考
使用。
6. ESI（Essential Science Indicators）HOT PAPERS，ESI 提供的最近两年的
热点文章，其排名根据文章的被引频次。
如果您对我们的栏目设置、内容编排、出版方式等有好的意见和建议，欢
迎与我们联系，我们将积极采纳，使这份电子刊物以臻完善，共同努力创建国内
一流、国际知名的高水平研究型大学。
图书馆
2013 年 9 月
目
录
一、Elsevier Science Direct Top 25 (材料类) .............. 1
二、Elsevier Science Direct Top 25 (工程类) ............. 11
三、IEL Top20 ........................................... 21
四、ACM 最新会议 ........................................ 30
五、AIAA 最新会议 ....................................... 35
六、IEEE 最新会议 ....................................... 40
七、ESI HOT PAPERS（ENGINEERING） ....................... 41
一、Elsevier Science Direct Top 25 (材料类)
（来源：http://www.sciencedirect.com/）
1.题目：Photo-induced properties in BiFeO"3 film • Article
出处：Materials Chemistry and Physics, Volume 132, Issue 2-3, February 2012, Pages 364-367
作者：Bing-Cheng, L.; Chang-Le, C.; Ke-Xin, J.
摘要： A high degree c-axis oriented BiFeO3 film was grown on LaNiO3-coated SrTiO3 substrate
by pulsed laser deposition. The leakage current density vs electric field characteristics were
investigated as a function of illumination wavelength and intensity. Analysis of film electrical
response suggests that the leakage current follows the Poole–Frenkel mechanism in dark.
Additionally, a correlation is observed between the wavelength and power of light and the changes
of photoconductivity.
2. 题目：Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite
oxide • Article
出处：Carbon, Volume 45, Issue 7, June 2007, Pages 1558-1565
作者：Stankovich, S.; Dikin, D.A.; Piner, R.D.; Kohlhaas, K.A.; Kleinhammes, A.; Jia, Y.; Wu, Y.;
Nguyen, S.T.; Ruoff, R.S.
摘要：Reduction of a colloidal suspension of exfoliated graphene oxide sheets in water with
hydrazine hydrate results in their aggregation and subsequent formation of a high-surface-area
carbon material which consists of thin graphene-based sheets. The reduced material was
characterized by elemental analysis, thermo-gravimetric analysis, scanning electron microscopy,
X-ray photoelectron spectroscopy, NMR spectroscopy, Raman spectroscopy, and by electrical
conductivity measurements.
3. 题 目 ： Synthesis and surface engineering of iron oxide nanoparticles for biomedical
applications • Review article
出处：Biomaterials, Volume 26, Issue 18, June 2005, Pages 3995-4021
作者：Gupta, A.K.; Gupta, M.
摘要：Superparamagnetic iron oxide nanoparticles (SPION) with appropriate surface chemistry
have been widely used experimentally for numerous in vivo applications such as magnetic
resonance imaging contrast enhancement, tissue repair, immunoassay, detoxification of biological
fluids, hyperthermia, drug delivery and in cell separation, etc. All these biomedical and
bioengineering applications require that these nanoparticles have high magnetization values and
size smaller than 100 nm with overall narrow particle size distribution, so that the particles have
uniform physical and chemical properties. In addition, these applications need special surface
coating of the magnetic particles, which has to be not only non-toxic and biocompatible but also
allow a targetable delivery with particle localization in a specific area. To this end, most work in
this field has been done in improving the biocompatibility of the materials, but only a few
1
scientific investigations and developments have been carried out in improving the quality of
magnetic particles, their size distribution, their shape and surface in addition to characterizing
them to get a protocol for the quality control of these particles. Nature of surface coatings and
their subsequent geometric arrangement on the nanoparticles determine not only the overall size of
the colloid but also play a significant role in biokinetics and biodistribution of nanoparticles in the
body. The types of specific coating, or derivatization, for these nanoparticles depend on the end
application and should be chosen by keeping a particular application in mind, whether it be aimed
at inflammation response or anti-cancer agents. Magnetic nanoparticles can bind to drugs, proteins,
enzymes, antibodies, or nucleotides and can be directed to an organ, tissue, or tumour using an
external magnetic field or can be heated in alternating magnetic fields for use in hyperthermia.
This review discusses the synthetic chemistry, fluid stabilization and surface modification of
superparamagnetic iron oxide nanoparticles, as well as their use for above biomedical
applications.
4. 题目：Graphene based materials: Past, present and future • Review article
出处：Progress in Materials Science, Volume 56, Issue 8, October 2011, Pages 1178-1271
作者：Singh, V.; Joung, D.; Zhai, L.; Das, S.; Khondaker, S.I.; Seal, S.
摘要：Graphene, a two dimensional monoatomic thick building block of a carbon allotrope, has
emerged as an exotic material of the 21st century, and received world-wide attention due to its
exceptional charge transport, thermal, optical, and mechanical properties. Graphene and its
derivatives are being studied in nearly every field of science and engineering. Recent progress has
shown that the graphene-based materials can have a profound impact on electronic and
optoelectronic devices, chemical sensors, nanocomposites and energy storage. The aim of this
review article is to provide a comprehensive scientific progress of graphene to date and evaluate
its future perspective. Various synthesis processes of single layer graphene, graphene nanoribbons,
chemically derived graphene, and graphene-based polymer and nano particle composites are
reviewed. Their structural, thermal, optical, and electrical properties were also discussed along
with their potential applications. The article concludes with a brief discussion on the impact of
graphene and related materials on the environment, its toxicological effects and its future
prospects in this rapidly emerging field.
5. 题目：Recent advances in graphene based polymer composites • Review article
出处：Progress in Polymer Science, Volume 35, Issue 11, November 2010, Pages 1350-1375
作者：Kuilla, T.; Bhadra, S.; Yao, D.; Kim, N.H.; Bose, S.; Lee, J.H.
摘要：This paper reviews recent advances in the modification of graphene and the fabrication of
graphene-based polymer nanocomposites. Recently, graphene has attracted both academic and
industrial interest because it can produce a dramatic improvement in properties at very low filler
content. The modification of graphene/graphene oxide and the utilization of these materials in the
fabrication of nanocomposites with different polymer matrixes have been explored. Different
organic polymers have been used to fabricate graphene filled polymer nanocomposites by a range
of methods. In the case of modified graphene-based polymer nanocomposites, the percolation
threshold can be achieved at a very lower filler loading. Herein, the structure, preparation and
properties of polymer/graphene nanocomposites are discussed in general along with detailed
examples drawn from the scientific literature.
2
6. 题目：Some organo-compounds of calcium, strontium and barium • Article
出处：Journal of Organometallic Chemistry, Volume 32, Issue 3, November 1971, Pages 279-284
作者：M.A. Coles1; F.A. Hart
摘要：Bis(2-phenylethynyl)calcium, Ca(C
CPh)2, and the corresponding strontium and barium
compounds have been isolated as thermally stable solids. Some of their properties and reactions
are described.
7. 题目：The surface science of titanium dioxide • Review article
出处：Surface Science Reports, Volume 48, Issue 5-8, January 2003, Pages 53-229
作者：Diebold, U.
摘要：Titanium dioxide is the most investigated single-crystalline system in the surface science of
metal oxides, and the literature on rutile (1 1 0), (1 0 0), (0 0 1), and anatase surfaces is reviewed.
This paper starts with a summary of the wide variety of technical fields where TiO2 is of
importance. The bulk structure and bulk defects (as far as relevant to the surface properties) are
briefly reviewed. Rules to predict stable oxide surfaces are exemplified on rutile (1 1 0). The
surface structure of rutile (1 1 0) is discussed in some detail. Theoretically predicted and
experimentally determined relaxations of surface geometries are compared, and defects (step edge
orientations, point and line defects, impurities, surface manifestations of crystallographic shear
planes—CSPs) are discussed, as well as the image contrast in scanning tunneling microscopy
(STM). The controversy about the correct model for the (1×2) reconstruction appears to be settled.
Different surface preparation methods, such as reoxidation of reduced crystals, can cause a drastic
effect on surface geometries and morphology, and recommendations for preparing different
TiO2(1 1 0) surfaces are given. The structure of the TiO2(1 0 0)-(1×1) surface is discussed and the
proposed models for the (1×3) reconstruction are critically reviewed. Very recent results on
anatase (1 0 0) and (1 0 1) surfaces are included.
The electronic structure of stoichiometric TiO2 surfaces is now well understood. Surface defects
can be detected with a variety of surface spectroscopies. The vibrational structure is dominated by
strong Fuchs–Kliewer phonons, and high-resolution electron energy loss spectra often need to be
deconvoluted in order to render useful information about adsorbed molecules.
The growth of metals (Li, Na, K, Cs, Ca, Al, Ti, V, Nb, Cr, Mo, Mn, Fe, Co, Rh, Ir, Ni, Pd, Pt, Cu,
Ag, Au) as well as some metal oxides on TiO2 is reviewed. The tendency to ‘wet’ the overlayer,
the growth morphology, the epitaxial relationship, and the strength of the interfacial
oxidation/reduction reaction all follow clear trends across the periodic table, with the reactivity of
the overlayer metal towards oxygen being the most decisive factor. Alkali atoms form ordered
superstructures at low coverages. Recent progress in understanding the surface structure of metals
in the ‘strong-metal support interaction’ (SMSI) state is summarized.
Literature is reviewed on the adsorption and reaction of a wide variety of inorganic molecules (H2,
O2, H2O, CO, CO2, N2, NH3, NOx, sulfur- and halogen-containing molecules, rare gases) as well
as organic molecules (carboxylic acids, alcohols, aldehydes and ketones, alkynes, pyridine and its
derivates, silanes, methyl halides). The application of TiO2-based systems in photo-active devices
3
is discussed, and the results on UHV-based photocatalytic studies are summarized.
The review ends with a brief conclusion and outlook of TiO2-based surface science for the future.
8. 题目：Surface modification of inorganic nanoparticles for development of organic-inorganic
nanocomposites-A review • Review article
出处：Progress in Polymer Science, Volume 38, Issue 8, August 2013, Pages 1232-1261
作者：Kango, S.; Kalia, S.; Celli, A.; Njuguna, J.; Habibi, Y.; Kumar, R.
摘要：Nanoparticles and nanocomposites are used in a wide range of applications in various fields,
such as medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronic devices,
semiconductor devices, aerospace, construction and catalysis. Nanoparticles can be incorporated
into polymeric nanocomposites. Polymeric nanocomposites consisting of inorganic nanoparticles
and organic polymers represent a new class of materials that exhibit improved performance
compared to their microparticle counterparts. It is therefore expected that they will advance the
field of engineering applications. Incorporation of inorganic nanoparticles into a polymer matrix
can significantly affect the properties of the matrix. The resulting composite might exhibit
improved thermal, mechanical, rheological, electrical, catalytic, fire retardancy and optical
properties. The properties of polymer composites depend on the type of nanoparticles that are
incorporated, their size and shape, their concentration and their interactions with the polymer
matrix. The main problem with polymer nanocomposites is the prevention of particle aggregation.
It is difficult to produce monodispersed nanoparticles in a polymer matrix because nanoparticles
agglomerate due to their specific surface area and volume effects. This problem can be overcome
by modification of the surface of the inorganic particles. The modification improves the interfacial
interactions between the inorganic particles and the polymer matrix. There are two ways to modify
the surface of inorganic particles. The first is accomplished through surface absorption or reaction
with small molecules, such as silane coupling agents, and the second method is based on grafting
polymeric molecules through covalent bonding to the hydroxyl groups existing on the particles.
The advantage of the second procedure over the first lies in the fact that the polymer-grafted
particles can be designed with the desired properties through a proper selection of the species of
the grafting monomers and the choice of grafting conditions.
9. 题目：Carbon nanotube-polymer composites: Chemistry, processing, mechanical and electrical
properties • Review article
出处：Progress in Polymer Science, Volume 35, Issue 3, March 2010, Pages 357-401
作者：Spitalsky, Z.; Tasis, D.; Papagelis, K.; Galiotis, C.
摘要：Carbon nanotubes have long been recognized as the stiffest and strongest man-made
material known to date. In addition, their high electrical conductivity has roused interest in the
area of electrical appliances and communication related applications. However, due to their
miniscule size, the excellent properties of these nanostructures can only be exploited if they are
homogeneously embedded into light-weight matrices as those offered by a whole series of
engineering polymers. We review the present state of polymer nanocomposites research in which
the fillers are carbon nanotubes. In order to enhance their chemical affinity to engineering polymer
matrices, chemical modification of the graphitic sidewalls and tips is necessary. In this review, an
extended account of the various chemical strategies for grafting polymers onto carbon nanotubes
4
and the manufacturing of carbon nanotube/polymer nanocomposites is given. The mechanical and
electrical properties to date of a whole range of nanocomposites of various carbon nanotube
contents are also reviewed in an attempt to facilitate progress in this emerging area.
10. 题 目 ： A review on polymer nanofibers by electrospinning and their applications in
nanocomposites • Article
出处：Composites Science and Technology, Volume 63, Issue 15, November 2003, Pages
2223-2253
作者：Huang, Z.-M.; Zhang, Y.-Z.; Kotaki, M.; Ramakrishna, S.
摘要：Electrospinning has been recognized as an efficient technique for the fabrication of polymer
nanofibers. Various polymers have been successfully electrospun into ultrafine fibers in recent
years mostly in solvent solution and some in melt form. Potential applications based on such fibers
specifically their use as reinforcement in nanocomposite development have been realized. In this
paper, a comprehensive review is presented on the researches and developments related to
electrospun polymer nanofibers including processing, structure and property characterization,
applications, and modeling and simulations. Information of those polymers together with their
processing conditions for electrospinning of ultrafine fibers has been summarized in the paper.
Other issues regarding the technology limitations, research challenges, and future trends are also
discussed.
11. 题目：TiO"2 photocatalysis and related surface phenomena • Review article
出处：Surface Science Reports, Volume 63, Issue 12, December 2008, Pages 515-582
作者：Fujishima, A.; Zhang, X.; Tryk, D.A.
摘要：The field of photocatalysis can be traced back more than 80 years to early observations of
the chalking of titania-based paints and to studies of the darkening of metal oxides in contact with
organic compounds in sunlight. During the past 20 years, it has become an extremely well
researched field due to practical interest in air and water remediation, self-cleaning surfaces, and
self-sterilizing surfaces. During the same period, there has also been a strong effort to use
photocatalysis for light-assisted production of hydrogen. The fundamental aspects of
photocatalysis on the most studied photocatalyst, titania, are still being actively researched and
have recently become quite well understood. The mechanisms by which certain types of organic
compounds are decomposed completely to carbon dioxide and water, for example, have been
delineated. However, certain aspects, such as the photo-induced wetting phenomenon, remain
controversial, with some groups maintaining that the effect is a simple one in which organic
contaminants are decomposed, while other groups maintain that there are additional effects in
which the intrinsic surface properties are modified by light. During the past several years,
powerful tools such as surface spectroscopic techniques and scanning probe techniques performed
on single crystals in ultra-high vacuum, and ultrafast pulsed laser spectroscopic techniques have
been brought to bear on these problems, and new insights have become possible. Quantum
chemical calculations have also provided new insights. New materials have recently been
developed based on titania, and the sensitivity to visible light has improved. The new information
available is staggering, but we hope to offer an overview of some of the recent highlights, as well
as to review some of the origins and indicate some possible new directions.
5
12. 题目：Scaffolds in tissue engineering bone and cartilage • Article
出处：Biomaterials, Volume 21, Issue 24, December 2000, Pages 2529-2543
作者：Hutmacher, D.W.
摘要：Musculoskeletal tissue, bone and cartilage are under extensive investigation in tissue
engineering research. A number of biodegradable and bioresorbable materials, as well as scaffold
designs, have been experimentally and/or clinically studied. Ideally, a scaffold should have the
following characteristics: (i) three-dimensional and highly porous with an interconnected pore
network for cell growth and flow transport of nutrients and metabolic waste; (ii) biocompatible
and bioresorbable with a controllable degradation and resorption rate to match cell/tissue growth
in vitro and/or in vivo; (iii) suitable surface chemistry for cell attachment, proliferation, and
differentation and (iv) mechanical properties to match those of the tissues at the site of
implantation. This paper reviews research on the tissue engineering of bone and cartilage from the
polymeric scaffold point of view.
13. 题目：Organic-inorganic hybrid solar cells: A comparative review • Review article
出处：Solar Energy Materials and Solar Cells, Volume 107, December 2012, Pages 87-111
作者：Wright, M.; Uddin, A.
摘要：Organic materials have recently become of great interest for photovoltaic applications, due
to their potential to utilise high throughput, solution phase processing, which will lead to low cost
electricity production. Hybrid solar cells combine organic and inorganic materials with the aim of
utilising the low cost cell production of organic photovoltaics (OPV) as well as obtaining other
advantages, such as tuneable absorption spectra, from the inorganic component. Whilst hybrid
solar cells have the potential to achieve high power conversion efficiencies (PCE), currently
obtained efficiencies are quite low. The design of the inorganic material used as the electron
acceptor in hybrid solar cells, particularly the electronic structure, is crucial to the performance of
the device. There exists an optimal electronic structure design for an inorganic acceptor. To date,
four major material types have been investigated, being cadmium compounds, silicon, metal oxide
nanoparticles and low band gap nanoparticles. Currently, Cadmium Sulfide (CdS) quantum dots
represent the state of the art, yielding a PCE of greater than 4%. This review compares the
electronic structure of these materials with the optimal design components of an inorganic material
and also explores possible limitations to the PCE of these devices, such as nanomorphology
control and nanoparticle surface chemistry. This report provides the reader with a concise
synthesis of the current state of the art for bulk heterojunction organic—inorganic hybrid solar
cells. Additionally, it highlights key research areas which require attention to allow for the
commercialisation of this technology.
14. 题目：Chemical functionalization of graphene and its applications • Review article
出处：Progress in Materials Science, Volume 57, Issue 7, September 2012, Pages 1061-1105
作者：Kuila, T.; Bose, S.; Mishra, A.K.; Khanra, P.; Kim, N.H.; Lee, J.H.
摘要：Functionalization and dispersion of graphene sheets are of crucial importance for their end
applications. Chemical functionalization of graphene enables this material to be processed by
solvent-assisted techniques, such as layer-by-layer assembly, spin-coating, and filtration. It also
prevents the agglomeration of single layer graphene during reduction and maintains the inherent
properties of graphene. Therefore, a detailed review on the advances of chemical functionalization
6
of graphene is presented. Synthesis and characterization of graphene have also been reviewed in
the current article. The functionalization of graphene can be performed by covalent and
noncovalent modification techniques. In both cases, surface modification of graphene oxide
followed by reduction has been carried out to obtain functionalized graphene. It has been found
that both the covalent and noncovalent modification techniques are very effective in the
preparation of processable graphene. However, the electrical conductivity of the functionalized
graphene has been observed to decrease significantly compared to pure graphene. Moreover, the
surface area of the functionalized graphene prepared by covalent and non-covalent techniques
decreases significantly due to the destructive chemical oxidation of flake graphite followed by
sonication, functionalization and chemical reduction. In order to overcome these problems, several
studies have been reported on the preparation of functionalized graphene directly from graphite
(one-step process). In all these cases, surface modification of graphene can prevent agglomeration
and facilitates the formation of stable dispersions. Surface modified graphene can be used for the
fabrication of polymer nanocomposites, super-capacitor devices, drug delivery system, solar cells,
memory devices, transistor device, biosensor, etc.
15. 题目：A review of chitin and chitosan applications • Review article
出处：Reactive and Functional Polymers, Volume 46, Issue 1, November 2000, Pages 1-27
作者：Ravi Kumar, M.N.
摘要：Chitin is the most abundant natural amino polysaccharide and is estimated to be produced
annually almost as much as cellulose. It has become of great interest not only as an underutilized
resource, but also as a new functional material of high potential in various fields, and recent
progress in chitin chemistry is quite noteworthy. The purpose of this review is to take a closer look
at chitin and chitosan applications. Based on current research and existing products, some new and
futuristic approaches in this fascinating area are thoroughly discussed.
16. 题 目 ：Resistive switching properties of TiO"2 film for flexible non-volatile memory
applications • Article
出处：Ceramics International
作者：Lin, C.C.; Liao, J.W.; Li, W.Y.
摘要：Flexible electronics attracts much attention due to its advantages of flexibility and light
weight. The resistive switching memory fabricated at low temperature with good performance is
possibly used in the flexible electronics. In this work, an Al/TiO2/Al structural device is
successfully fabricated on a flexible substrate at room temperature for the first time. The resistive
switching properties of the flexible device are investigated. A possible resistive switching
mechanism is proposed. The non-volatility of the flexible device is also demonstrated. Based on
the experimental results, the proposed flexible device is possibly used in flexible non-volatile
memory.
17. 题 目 ： High reliability optical interconnections for short range applications in high
performance optical communication systems • Article
出处：Optics & Laser Technology, Volume 48, June 2013, Pages 302-308
作者：Rashed, A.N.Z.
摘要：This paper has proposed a new progress of optical interconnections, taking into account the
7
following items such as its ultimate device bandwidth, its available transmission bit rates based on
soliton transmission technique, its ultimate transmission link bandwidth, and the product of the
link bandwidth and its transmission length. Two items of special emphasis in the basic design of
optical interconnection are polymethyl metha acrylate (PMMA) and barium fluoride (BaF2)
waveguides, and the optical source cast as vertical cavity surface emitting laser diode (VCSELD),
made of either AlGaAs at operating wavelength of 1.3 μm or aluminum gallium indium phosphors
(AlGaInP) at operating wavelength of 1.55 μm; special emphasis is focused on both the above two
items under different operating conditions including both thermal and electrical effects. The
optical interconnect is built up on the bases of two VCSELD and one optical link where thermal
effects of both diodes and links are included. The good performance of the optical interconnect is
deeply and parametrically investigated under wide ranges of the affecting parameters. The high
speed performance is processed through three different effects, namely the device 3-dB bandwidth,
and the link dispersion characteristics.
18. 题目：Biodegradable polymeric nanoparticles based drug delivery systems • Review article
出处：Colloids and Surfaces B: Biointerfaces, Volume 75, Issue 1, January 2010, Pages 1-18
作者：Kumari, A.; Yadav, S.K.; Yadav, S.C.
摘要：Biodegradable nanoparticles have been used frequently as drug delivery vehicles due to its
grand bioavailability, better encapsulation, control release and less toxic properties. Various
nanoparticulate systems, general synthesis and encapsulation process, control release and
improvement of therapeutic value of nanoencapsulated drugs are covered in this review. We have
highlighted the impact of nanoencapsulation of various disease related drugs on biodegradable
nanoparticles such as PLGA, PLA, chitosan, gelatin, polycaprolactone and
poly-alkyl-cyanoacrylates.
19. 题目：Polymer nanoparticles: Preparation techniques and size-control parameters • Review
article
出处：Progress in Polymer Science, Volume 36, Issue 7, July 2011, Pages 887-913
作者：Rao, J.P.; Geckeler, K.E.
摘要：Polymer nanoparticles have attracted the interest of many research groups and have been
utilized in an increasing number of fields during the last decades. Generally, two main strategies
are employed for their preparation: the dispersion of preformed polymers and the polymerization
of monomers. Various techniques can be used to produce polymer nanoparticles, such as solvent
evaporation, salting-out, dialysis, supercritical fluid technology, micro-emulsion, mini-emulsion,
surfactant-free emulsion, and interfacial polymerization. The choice of method depends on a
number of factors, such as, particle size, particle size distribution, area of application, etc. This
review covers the general description of the preparation of polymer nanoparticles and the detailed
description of the crucial parameters involved in techniques designed to obtain the desired
properties.
20. 题目：Lithium batteries: Status, prospects and future • Review article
出处：Journal of Power Sources, Volume 195, Issue 9, May 2010, Pages 2419-2430
作者：Scrosati, B.; Garche, J.
摘要：Lithium batteries are characterized by high specific energy, high efficiency and long life.
8
These unique properties have made lithium batteries the power sources of choice for the consumer
electronics market with a production of the order of billions of units per year. These batteries are
also expected to find a prominent role as ideal electrochemical storage systems in renewable
energy plants, as well as power systems for sustainable vehicles, such as hybrid and electric
vehicles. However, scaling up the lithium battery technology for these applications is still
problematic since issues such as safety, costs, wide operational temperature and materials
availability, are still to be resolved. This review focuses first on the present status of lithium
battery technology, then on its near future development and finally it examines important new
directions aimed at achieving quantum jumps in energy and power content.
21. 题目：Bio-inspired superoleophobic and smart materials: Design, fabrication, and application
• Review article
出处：Progress in Materials Science, Volume 58, Issue 4, May 2013, Pages 503-564
作者：Liu, K.; Tian, Y.; Jiang, L.
摘要：Through evolution, nature has arrived at what is optimal. Inspired by the biomaterials with
special wettability, superhydrophobic materials have been well-investigated and -covered by
several excellent reviews. The construction of superoleophobicity is more difficult than that of
superhydrophobicity because the surface tension of oil or other organic liquids is lower than that
of water. However, superoleophobic surfaces have drawn a great deal of attention for both
fundamental research and practical applications in a variety of fields. In this contribution, we
focus on recent research progress in the design, fabrication, and application of bio-inspired
superoleophobic and smart surfaces, including superoleophobic–superhydrophobic surfaces,
oleophobic–hydrophilic surfaces, underwater superoleophobic surfaces, and smart surfaces.
Although the research of bio-inspired superoleophobicity is in its infancy, it is a rapidly growing
and enormously promising field. The remaining challenges and future outlook of this field are also
addressed. Multifunctional integration is a inherent characteristic for biological materials.
Learning from nature has long been a source of bio-inspiration for scientists and engineers.
Therefore, further cross-disciplinary cooperation is essential for the construction of
multifunctional advanced superoleophobic surfaces through learning the optimized biological
solutions from nature. We hope this review will provide some inspirations to the researchers in the
field of material science, chemistry, physics, biology, and engineering.
22. 题目：Fabrication and processing of polymer solar cells: A review of printing and coating
techniques • Review article
出处：Solar Energy Materials and Solar Cells, Volume 93, Issue 4, April 2009, Pages 394-412
作者：Krebs, F.C.
摘要：Polymer solar cells are reviewed in the context of the processing techniques leading to
complete devices. A distinction is made between the film-forming techniques that are used
currently such as spincoating, doctor blading and casting and the, from a processing point of view,
more desirable film-forming techniques such as slot-die coating, gravure coating, knife-over-edge
coating, off-set coating, spray coating and printing techniques such as ink jet printing, pad printing
and screen printing. The former are used almost exclusively and are not suited for high-volume
production whereas the latter are highly suited, but little explored in the context of polymer solar
cells. A further distinction is made between printing and coating when a film is formed. The entire
9
process leading to polymer solar cells is broken down into the individual steps and the available
techniques and materials for each step are described with focus on the particular advantages and
disadvantages associated with each case.
23. 题目：Graphene/metal oxide composite electrode materials for energy storage • Review article
出处：Nano Energy, Volume 1, Issue 1, January 2012, Pages 107-131
作者：Wu, Z.S.; Zhou, G.; Yin, L.C.; Ren, W.; Li, F.; Cheng, H.M.
摘要：Recent progress on graphene/metal oxide composites as advanced electrode materials in
lithium ion batteries (LIBs) and electrochemical capacitors (ECs) is described, highlighting the
importance of synergistic effects between graphene and metal oxides and the beneficial role of
graphene in composites for LIBs and ECs. It is demonstrated that, when the composites are used
as electrode materials for LIBs and ECs, compared to their individual constituents, graphene/metal
oxide composites with unique structural variables such as anchored, wrapped, encapsulated,
sandwich, layered and mixed models have a significant improvement in their electrochemical
properties such as high capacity, high rate capability and excellent cycling stability. First, an
introduction on the properties, synthesis strategies and use of graphene is briefly given, followed
by a state-of-the-art review on the preparation of graphene/metal oxide composites and their
electrochemical properties in LIBs and ECs. Finally, the prospects and future challenges of
graphene/metal oxide composites for energy storage are discussed.
24. 题目：Recent developments in cathode materials for lithium ion batteries • Review article
出处：Journal of Power Sources, Volume 195, Issue 4, February 2010, Pages 939-954
作者：Fergus, J.W.
摘要：One of the challenges for improving the performance of lithium ion batteries to meet
increasingly demanding requirements for energy storage is the development of suitable cathode
materials. Cathode materials must be able to accept and release lithium ions repeatedly (for
recharging) and quickly (for high current). Transition metal oxides based on the α-NaFeO2, spinel
and olivine structures have shown promise, but improvements are needed to reduce cost and
extend effective lifetime. In this paper, recent developments in cathode materials for lithium ion
batteries are reviewed. This includes comparison of the performance characteristics of the
promising cathode materials and approaches for improving their performances.
25. 题目：Hydrogels for tissue engineering: scaffold design variables and applications • Review
article
出处：Biomaterials, Volume 24, Issue 24, November 2003, Pages 4337-4351
作者：Drury, J.L.; Mooney, D.J.
摘要：Polymer scaffolds have many different functions in the field of tissue engineering. They are
applied as space filling agents, as delivery vehicles for bioactive molecules, and as
three-dimensional structures that organize cells and present stimuli to direct the formation of a
desired tissue. Much of the success of scaffolds in these roles hinges on finding an appropriate
material to address the critical physical, mass transport, and biological design variables inherent to
each application. Hydrogels are an appealing scaffold material because they are structurally
similar to the extracellular matrix of many tissues, can often be processed under relatively mild
conditions, and may be delivered in a minimally invasive manner. Consequently, hydrogels have
10
been utilized as scaffold materials for drug and growth factor delivery, engineering tissue
replacements, and a variety of other applications.
二、Elsevier Science Direct Top 25 (工程类)
（来源：http://www.sciencedirect.com/）
1.题目：Thermomechanical analysis of residual stresses in brazed diamond metal joints using
Raman spectroscopy and finite element simulation • Article
出处：Mechanics of Materials, Volume 52, September 2012, Pages 69-77
作者：Akbari, M.; Buhl, S.; Leinenbach, C.; Spolenak, R.; Wegener, K.
摘要：Thermal residual stresses are one of the crucial parameters in engineered grinding tool
(EGT) life and its consistency. Predicting failure of brazed diamond metal joints in EGTs is related
to analyzing the thermal residual stresses during the cooling process. Thus thermal residual
stresses have been simulated in a model with realistic materials properties, for instance isotropic
hardening and a hyperbolic-sine creep law for SS316L and the silver–copper–titanium active filler
alloy, named Cusil ABA™. Also, special modeling techniques such as tie constraint and
sub-modeling have been used to model an intermetallic layer titanium-carbide (TiC) with
dimensions in nanometers, where the rest of the model’s dimensions are in millimeters. To verify
the simulated stress state of the diamond, Raman-active optical phonon modes at three different
paths in the diamond were measured. As the experiments with Raman spectroscopy (RS) do not
deliver stress components, the solution is to directly compute the peak shift of Raman spectrum.
The splitting in phonon frequencies and the mixing of phonon modes contain information about
the thermal residual stresses in the diamond. Finally the shift in the phonon frequencies was
calculated from the different numerical residual elastic strain components and compared to the
experimental results.
2. 题目：A case study on a hybrid wind speed forecasting method using BP neural network •
Article
出处：Knowledge-Based Systems, Volume 24, Issue 7, October 2011, Pages 1048-1056
作者：Guo, Z.h.; Wu, J.; Lu, H.y.; Wang, J.z.
摘要：Wind energy, which is intermittent by nature, can have a significant impact on power grid
security, power system operation, and market economics, especially in areas with a high level of
wind power penetration. Wind speed forecasting has been a vital part of wind farm planning and
the operational planning of power grids with the aim of reducing greenhouse gas emissions.
Improving the accuracy of wind speed forecasting algorithms has significant technological and
economic impacts on these activities, and significant research efforts have addressed this aim
11
recently. However, there is no single best forecasting algorithm that can be applied to any wind
farm due to the fact that wind speed patterns can be very different between wind farms and are
usually influenced by many factors that are location-specific and difficult to control. In this paper,
we propose a new hybrid wind speed forecasting method based on a back-propagation (BP) neural
network and the idea of eliminating seasonal effects from actual wind speed datasets using
seasonal exponential adjustment. This method can forecast the daily average wind speed one year
ahead with lower mean absolute errors compared to figures obtained without adjustment, as
demonstrated by a case study conducted using a wind speed dataset collected from the Minqin
area in China from 2001 to 2006.
3. 题 目 ： Synthesis and surface engineering of iron oxide nanoparticles for biomedical
applications • Review article
出处：Biomaterials, Volume 26, Issue 18, June 2005, Pages 3995-4021
作者：Gupta, A.K.; Gupta, M.
摘要：Superparamagnetic iron oxide nanoparticles (SPION) with appropriate surface chemistry
have been widely used experimentally for numerous in vivo applications such as magnetic
resonance imaging contrast enhancement, tissue repair, immunoassay, detoxification of biological
fluids, hyperthermia, drug delivery and in cell separation, etc. All these biomedical and
bioengineering applications require that these nanoparticles have high magnetization values and
size smaller than 100 nm with overall narrow particle size distribution, so that the particles have
uniform physical and chemical properties. In addition, these applications need special surface
coating of the magnetic particles, which has to be not only non-toxic and biocompatible but also
allow a targetable delivery with particle localization in a specific area. To this end, most work in
this field has been done in improving the biocompatibility of the materials, but only a few
scientific investigations and developments have been carried out in improving the quality of
magnetic particles, their size distribution, their shape and surface in addition to characterizing
them to get a protocol for the quality control of these particles. Nature of surface coatings and
their subsequent geometric arrangement on the nanoparticles determine not only the overall size of
the colloid but also play a significant role in biokinetics and biodistribution of nanoparticles in the
body. The types of specific coating, or derivatization, for these nanoparticles depend on the end
application and should be chosen by keeping a particular application in mind, whether it be aimed
at inflammation response or anti-cancer agents. Magnetic nanoparticles can bind to drugs, proteins,
enzymes, antibodies, or nucleotides and can be directed to an organ, tissue, or tumour using an
external magnetic field or can be heated in alternating magnetic fields for use in hyperthermia.
This review discusses the synthetic chemistry, fluid stabilization and surface modification of
superparamagnetic iron oxide nanoparticles, as well as their use for above biomedical
applications.
4. 题目：The Internet of Things: A survey • Article
出处：Computer Networks, Volume 54, Issue 15, October 2010, Pages 2787-2805
作者：Atzori, L.; Iera, A.; Morabito, G.
摘要：This paper addresses the Internet of Things. Main enabling factor of this promising
paradigm is the integration of several technologies and communications solutions. Identification
and tracking technologies, wired and wireless sensor and actuator networks, enhanced
12
communication protocols (shared with the Next Generation Internet), and distributed intelligence
for smart objects are just the most relevant. As one can easily imagine, any serious contribution to
the advance of the Internet of Things must necessarily be the result of synergetic activities
conducted in different fields of knowledge, such as telecommunications, informatics, electronics
and social science. In such a complex scenario, this survey is directed to those who want to
approach this complex discipline and contribute to its development. Different visions of this
Internet of Things paradigm are reported and enabling technologies reviewed. What emerges is
that still major issues shall be faced by the research community. The most relevant among them
are addressed in details.
5. 题目：Surface plasmon resonance sensors: review • Article
出处：Sensors and Actuators B: Chemical, Volume 54, Issue 1-2, January 1999, Pages 3-15
作者：Homola, J.; Yee, S.S.; Gauglitz, G.
摘要：Since the first application of the surface plasmon resonance (SPR) phenomenon for sensing
almost two decades ago, this method has made great strides both in terms of instrumentation
development and applications. SPR sensor technology has been commercialized and SPR
biosensors have become a central tool for characterizing and quantifying biomolecular interactions.
This paper attempts to review the major developments in SPR technology. Main application areas
are outlined and examples of applications of SPR sensor technology are presented. Future
prospects of SPR sensor technology are discussed.
6. 题 目 ： A review on polymer nanofibers by electrospinning and their applications in
nanocomposites • Article
出处：Composites Science and Technology, Volume 63, Issue 15, November 2003, Pages
2223-2253
作者：Huang, Z.-M.; Zhang, Y.-Z.; Kotaki, M.; Ramakrishna, S.
摘要：Electrospinning has been recognized as an efficient technique for the fabrication of polymer
nanofibers. Various polymers have been successfully electrospun into ultrafine fibers in recent
years mostly in solvent solution and some in melt form. Potential applications based on such fibers
specifically their use as reinforcement in nanocomposite development have been realized. In this
paper, a comprehensive review is presented on the researches and developments related to
electrospun polymer nanofibers including processing, structure and property characterization,
applications, and modeling and simulations. Information of those polymers together with their
processing conditions for electrospinning of ultrafine fibers has been summarized in the paper.
Other issues regarding the technology limitations, research challenges, and future trends are also
discussed.
7. 题目：A survey on security issues in service delivery models of cloud computing • Review
article
出处：Journal of Network and Computer Applications, Volume 34, Issue 1, January 2011, Pages
1-11
作者：Subashini, S.; Kavitha, V.
摘要：Cloud computing is a way to increase the capacity or add capabilities dynamically without
investing in new infrastructure, training new personnel, or licensing new software. It extends
13
Information Technology’s (IT) existing capabilities. In the last few years, cloud computing has
grown from being a promising business concept to one of the fast growing segments of the IT
industry. But as more and more information on individuals and companies are placed in the cloud,
concerns are beginning to grow about just how safe an environment it is. Despite of all the hype
surrounding the cloud, enterprise customers are still reluctant to deploy their business in the cloud.
Security is one of the major issues which reduces the growth of cloud computing and
complications with data privacy and data protection continue to plague the market. The advent of
an advanced model should not negotiate with the required functionalities and capabilities present
in the current model. A new model targeting at improving features of an existing model must not
risk or threaten other important features of the current model. The architecture of cloud poses such
a threat to the security of the existing technologies when deployed in a cloud environment. Cloud
service users need to be vigilant in understanding the risks of data breaches in this new
environment. In this paper, a survey of the different security risks that pose a threat to the cloud is
presented. This paper is a survey more specific to the different security issues that has emanated
due to the nature of the service delivery models of a cloud computing system.
8. 题目：Wireless sensor networks: a survey • Article
出处：Computer Networks, Volume 38, Issue 4, March 2002, Pages 393-422
作者：Akyildiz, I.F.; Su, W.; Sankarasubramaniam, Y.; Cayirci, E.
摘要：This paper describes the concept of sensor networks which has been made viable by the
convergence of micro-electro-mechanical systems technology, wireless communications and
digital electronics. First, the sensing tasks and the potential sensor networks applications are
explored, and a review of factors influencing the design of sensor networks is provided. Then, the
communication architecture for sensor networks is outlined, and the algorithms and protocols
developed for each layer in the literature are explored. Open research issues for the realization of
sensor networks are also discussed.
9. 题目：Heat transfer-A review of 2005 literature • Review article
出处：International Journal of Heat and Mass Transfer, Volume 53, Issue 21-22, October 2010,
Pages 4397-4447
作者：Goldstein, R.J.; Ibele, W.E.; Patankar, S.V.; Simon, T.W.; Kuehn, T.H.; Strykowski, P.J.;
Tamma, K.K.; Heberlein, J.V.R.; Davidson, J.H.; Bischof, J.; Kulacki, F.A.; Kortshagen, U.;
Garrick, S.; Srinivasan, V.; Ghosh, K.; Mittal, R.
摘要：The present review is intended to encompass the heat transfer literature published in 2005.
While of a wide-range in scope, some selection is inevitable. We restrict ourselves to papers
published in English through a peer-review process, with selected translations from journals
published in other languages. Papers from conference proceedings generally are not included,
though the Proceeding itself may be cited in the introduction. A significant fraction of the papers
reviewed herein relates to the science of heat transfer, including experimental, analytical and
numerical studies. Other papers cover applications where heat transfer plays a major role, not only
in man-made devices but in natural systems as well. The papers are grouped into major subject
areas and then into subfields within these areas. In addition to reviewing the literature, we mention
major conferences held in 2005, major awards related to heat transfer presented in 2005, and
books on heat transfer published during the year.
14
10. 题目：Review on thermal energy storage with phase change: materials, heat transfer analysis
and applications • Review article
出处：Applied Thermal Engineering, Volume 23, Issue 3, February 2003, Pages 251-283
作者：Zalba, B.; Marn, J.M.S.T.; Cabeza, L.F.; Mehling, H.
摘要：Thermal energy storage in general, and phase change materials (PCMs) in particular, have
been a main topic in research for the last 20 years, but although the information is quantitatively
enormous, it is also spread widely in the literature, and difficult to find. In this work, a review has
been carried out of the history of thermal energy storage with solid–liquid phase change. Three
aspects have been the focus of this review: materials, heat transfer and applications. The paper
contains listed over 150 materials used in research as PCMs, and about 45 commercially available
PCMs. The paper lists over 230 references.
11. 题目：Scaffolds in tissue engineering bone and cartilage • Article
出处：Biomaterials, Volume 21, Issue 24, December 2000, Pages 2529-2543
作者：Hutmacher, D.W.
摘要：Musculoskeletal tissue, bone and cartilage are under extensive investigation in tissue
engineering research. A number of biodegradable and bioresorbable materials, as well as scaffold
designs, have been experimentally and/or clinically studied. Ideally, a scaffold should have the
following characteristics: (i) three-dimensional and highly porous with an interconnected pore
network for cell growth and flow transport of nutrients and metabolic waste; (ii) biocompatible
and bioresorbable with a controllable degradation and resorption rate to match cell/tissue growth
in vitro and/or in vivo; (iii) suitable surface chemistry for cell attachment, proliferation, and
differentation and (iv) mechanical properties to match those of the tissues at the site of
implantation. This paper reviews research on the tissue engineering of bone and cartilage from the
polymeric scaffold point of view.
12. 题目：Wireless sensor network survey • Article
出处：Computer Networks, Volume 52, Issue 12, August 2008, Pages 2292-2330
作者：Yick, J.; Mukherjee, B.; Ghosal, D.
摘要：A wireless sensor network (WSN) has important applications such as remote environmental
monitoring and target tracking. This has been enabled by the availability, particularly in recent
years, of sensors that are smaller, cheaper, and intelligent. These sensors are equipped with
wireless interfaces with which they can communicate with one another to form a network. The
design of a WSN depends significantly on the application, and it must consider factors such as the
environment, the application’s design objectives, cost, hardware, and system constraints. The goal
of our survey is to present a comprehensive review of the recent literature since the publication of
[I.F. Akyildiz, W. Su, Y. Sankarasubramaniam, E. Cayirci, A survey on sensor networks, IEEE
Communications Magazine, 2002]. Following a top-down approach, we give an overview of
several new applications and then review the literature on various aspects of WSNs. We classify
the problems into three different categories: (1) internal platform and underlying operating system,
(2) communication protocol stack, and (3) network services, provisioning, and deployment. We
review the major development in these three categories and outline new challenges.
15
13. 题 目 ： High reliability optical interconnections for short range applications in high
performance optical communication systems • Article
出处：Optics & Laser Technology, Volume 48, June 2013, Pages 302-308
作者：Rashed, A.N.Z.
摘要：This paper has proposed a new progress of optical interconnections, taking into account the
following items such as its ultimate device bandwidth, its available transmission bit rates based on
soliton transmission technique, its ultimate transmission link bandwidth, and the product of the
link bandwidth and its transmission length. Two items of special emphasis in the basic design of
optical interconnection are polymethyl metha acrylate (PMMA) and barium fluoride (BaF2)
waveguides, and the optical source cast as vertical cavity surface emitting laser diode (VCSELD),
made of either AlGaAs at operating wavelength of 1.3 μm or aluminum gallium indium phosphors
(AlGaInP) at operating wavelength of 1.55 μm; special emphasis is focused on both the above two
items under different operating conditions including both thermal and electrical effects. The
optical interconnect is built up on the bases of two VCSELD and one optical link where thermal
effects of both diodes and links are included. The good performance of the optical interconnect is
deeply and parametrically investigated under wide ranges of the affecting parameters. The high
speed performance is processed through three different effects, namely the device 3-dB bandwidth,
and the link dispersion characteristics.
14. 题目：A review on novel processes of biodiesel production from waste cooking oil • Review
article
出处：Applied Energy, Volume 104, April 2013, Pages 683-710
作者：Talebian-Kiakalaieh, A.; Amin, N.A.S.; Mazaheri, H.
摘要：Fossil fuel depletion, environmental concerns, and steep hikes in the price of fossil fuels are
driving scientists to search for alternative fuels. The characteristics of biodiesel have made the
pursuit of high quality biodiesel production attractive. Utilization of waste cooking oil is a key
component in reducing biodiesel production costs up to 60–90%. Researchers have used various
types of homogeneous and heterogeneous catalyzed transesterification reaction for biodiesel
production. Meanwhile, the effect of novel processes such as membrane reactor, reactive
distillation column, reactive absorption, ultrasonic and microwave irradiation significantly
influenced the final conversion, yield and in particular, the quality of product. This article attempts
to cover all possible techniques in production of biodiesel from waste cooking oil.
15. 题目：Hydrogels for tissue engineering: scaffold design variables and applications • Review
article
出处：Biomaterials, Volume 24, Issue 24, November 2003, Pages 4337-4351
作者：Drury, J.L.; Mooney, D.J.
摘要：Polymer scaffolds have many different functions in the field of tissue engineering. They are
applied as space filling agents, as delivery vehicles for bioactive molecules, and as
three-dimensional structures that organize cells and present stimuli to direct the formation of a
desired tissue. Much of the success of scaffolds in these roles hinges on finding an appropriate
material to address the critical physical, mass transport, and biological design variables inherent to
each application. Hydrogels are an appealing scaffold material because they are structurally
similar to the extracellular matrix of many tissues, can often be processed under relatively mild
16
conditions, and may be delivered in a minimally invasive manner. Consequently, hydrogels have
been utilized as scaffold materials for drug and growth factor delivery, engineering tissue
replacements, and a variety of other applications.
16. 题目：Nanoparticles: a boon to drug delivery, therapeutics, diagnostics and imaging • Review
article
出处：Nanomedicine: Nanotechnology, Biology and Medicine, Volume 8, Issue 2, February 2012,
Pages 147-166
作者：Parveen, S.; Misra, R.; Sahoo, S.K.
摘要：Drug delivery is an interdisciplinary and independent field of research and is gaining the
attention of pharmaceutical researchers, medical doctors and industry. A safe and targeted drug
delivery could improve the performance of some classic medicines already on the market, and
moreover, will have implications for the development and success of new therapeutic strategies
such as anticancer drug delivery, peptide and protein delivery and gene therapy. In the last decade,
several drug-delivery technologies have emerged and a fascinating part of this field is the
development of nanoscale drug delivery devices. Nanoparticles (NPs) have been developed as an
important strategy to deliver conventional drugs, recombinant proteins, vaccines and more
recently, nucleotides. NPs and other colloidal drug-delivery systems modify the kinetics, body
distribution and drug release of an associated drug. This review article focuses on the potential of
nanotechnology in medicine and discusses different nanoparticulate drug-delivery systems
including polymeric NPs, ceramic NPs, magnetic NPs, polymeric micelles and dendrimers as well
as their applications in therapeutics, diagnostics and imaging.
17. 题目：Production of liquid biofuels from renewable resources • Review article
出处：Progress in Energy and Combustion Science, Volume 37, Issue 1, February 2011, Pages
52-68
作者：Nigam, P.S.; Singh, A.
摘要：This article is an up-to-date review of the literature available on the subject of liquid
biofuels. In search of a suitable fuel alternative to fast depleting fossil fuel and oil reserves and in
serious consideration of the environmental issues associated with the extensive use of fuels based
on petrochemicals, research work is in progress worldwide. Researchers have been re-directing
their interests in biomass based fuels, which currently seem to be the only logical alternative for
sustainable development in the context of economical and environmental considerations.
Renewable bioresources are available globally in the form of residual agricultural biomass and
wastes, which can be transformed into liquid biofuels. However, the process of conversion, or
chemical transformation, could be very expensive and not worth-while to use for an economical
large-scale commercial supply of biofuels. Hence, there is still need for much research to be done
for an effective, economical and efficient conversion process. Therefore, this article is written as a
broad overview of the subject, and includes information based on the research conducted globally
by scientists according to their local socio-cultural and economic situations.
18. 题目：A review on buildings energy consumption information • Article
出处：Energy and Buildings, Volume 40, Issue 3, January 2008, Pages 394-398
作者：Perez-Lombard, L.; Ortiz, J.; Pout, C.
17
摘要：The rapidly growing world energy use has already raised concerns over supply difficulties,
exhaustion of energy resources and heavy environmental impacts (ozone layer depletion, global
warming, climate change, etc.). The global contribution from buildings towards energy
consumption, both residential and commercial, has steadily increased reaching figures between
20% and 40% in developed countries, and has exceeded the other major sectors: industrial and
transportation. Growth in population, increasing demand for building services and comfort levels,
together with the rise in time spent inside buildings, assure the upward trend in energy demand
will continue in the future. For this reason, energy efficiency in buildings is today a prime
objective for energy policy at regional, national and international levels. Among building services,
the growth in HVAC systems energy use is particularly significant (50% of building consumption
and 20% of total consumption in the USA). This paper analyses available information concerning
energy consumption in buildings, and particularly related to HVAC systems. Many questions arise:
Is the necessary information available? Which are the main building types? What end uses should
be considered in the breakdown? Comparisons between different countries are presented specially
for commercial buildings. The case of offices is analysed in deeper detail.
19. 题目：Enterprise information systems project implementation: • Article
出处：International Journal of Production Economics, Volume 87, Issue 3, February 2004, Pages
251-266
作者：Yusuf, Yahaya; Gunasekaran, A; Abthorpe, Mark S
摘要：Economic globalisation and internationalisation of operations are essential factors in
integration of suppliers, partners and customers within and across national borders, the objective
being to achieve integrated supply chains. In this effort, implementation of information
technologies and systems such as enterprise resource planning (ERP) facilitate the desired level of
integration. There are cases of successful and unsuccessful implementations. The principal reason
for failure is often associated with poor management of the implementation process. This paper
examines key dimensions of implementation of ERP system within a large manufacturing
organisation and identifies core issues to confront in successful implementation of enterprise
information system. A brief overview of the application of ERP system is also presented and in
particular, ERP software package known as SAP R/3, which was the ERP software package
selected by Rolls-Royce plc. The paper takes an in-depth look at the issues behind the process of
ERP implementation via a case study methodology. It focuses on business and technical as well as
cultural issues at the heart of the Rolls-Royce implementation. The case study also looks at the
implementation time scales and assesses the benefits from the project both tangible and intangible.
20. 题目：Biodiesel from microalgae: A critical evaluation from laboratory to large scale
production • Review article
出处：Applied Energy, Volume 103, March 2013, Pages 444-467
作者：Rawat, I.; Ranjith Kumar, R.; Mutanda, T.; Bux, F.
摘要：The economically significant production of carbon-neutral biodiesel from microalgae has
been hailed as the ultimate alternative to depleting resources of petro-diesel due to its high cellular
concentration of lipids, resources and economic sustainability and overall potential advantages
over other sources of biofuels. Pertinent questions however need to be answered on the
commercial viability of large scale production of biodiesel from microalgae. Vital steps need to be
18
critically analysed at each stage. Isolation of microalgae should be based on the question of
whether marine or freshwater microalgae, cultures from collections or indigenous wild types are
best suited for large scale production. Furthermore, the determination of initial sampling points
play a pivotal role in the determination of strain selection as well as strain viability. The screening
process should identify, purify and select lipid producing strains. Are natural strains or stressed
strains higher in lipid productivity? The synergistic interactions that occur naturally between algae
and other microorganisms cannot be ignored. A lot of literature is available on the downstream
processing of microalgae but a few reports are available on the upstream processing of microalgae
for biomass and lipid production for biodiesel production. We present in this review an empirical
and critical analysis on the potential of translating research findings from laboratory scale trials to
full scale application. The move from laboratory to large scale microalgal cultivation requires
careful planning. It is imperative to do extensive pre-pilot demonstration trials and formulate a
suitable trajectory for possible data extrapolation for large scale experimental designs. The pros
and cons of the two widely used methods for growing microalgae by photobioreactors or open
raceway ponds are discussed in detail. In addition, current methods for biomass harvesting and
lipid extraction are critically evaluated. This would be novel approach to economical biodiesel
production from microalgae in the near future. Globally, microalgae are largest biomass producers
having higher neutral lipid content outcompeting terrestrial plants for biofuel production. However,
the viscosities of microalgal oils are usually higher than that of petroleum diesel.
21. 题目：A new efficient 3D non-hydrostatic free-surface flow model for simulating water wave
motions • Article
出处：Ocean Engineering, Volume 33, Issue 5-6, April 2006, Pages 587-609
作者：Choi, D.Y.; Wu, C.H.
摘要：A new three-dimensional, non-hydrostatic free surface flow model is presented. For
simulating water wave motions over uneven bottoms, the model employs an explicit project
method on a Cartesian the staggered gird system to solve the complete three-dimensional Navier
–Stokes equations. A bi-conjugated gradient method with a pre-conditioning procedure is used to
solve the resulting matrix system. The model is capable of resolving non-hydrostatic pressure by
incorporating the integral method of the top-layer pressure treatment, and predicting wave
propagation and interaction over irregular bottom by including a partial bottom-cell treatment.
Four examples of surface wave propagation are used to demonstrate the capability of the model.
Using a small of vertical layers (e.g. 2–3 layers), it is shown that the model could effectively and
accurately resolve wave shoaling, non-linearity, dispersion, fission, refraction, and diffraction
phenomena.
22. 题目：Data mining techniques and applications - A decade review from 2000 to 2011 •
Review article
出 处 ： Expert Systems with Applications, Volume 39, Issue 12, September 2012, Pages
11303-11311
作者：Liao, Shu-Hsien; Chu, Pei-Hui; Hsiao, Pei-Yuan
摘要：In order to determine how data mining techniques (DMT) and their applications have
developed, during the past decade, this paper reviews data mining techniques and their
applications and development, through a survey of literature and the classification of articles, from
19
2000 to 2011. Keyword indices and article abstracts were used to identify 216 articles concerning
DMT applications, from 159 academic journals (retrieved from five online databases), this paper
surveys and classifies DMT, with respect to the following three areas: knowledge types, analysis
types, and architecture types, together with their applications in different research and practical
domains. A discussion deals with the direction of any future developments in DMT methodologies
and applications: (1) DMT is finding increasing applications in expertise orientation and the
development of applications for DMT is a problem-oriented domain. (2) It is suggested that
different social science methodologies, such as psychology, cognitive science and human behavior
might implement DMT, as an alternative to the methodologies already on offer. (3) The ability to
continually change and acquire new understanding is a driving force for the application of DMT
and this will allow many new future applications.
23. 题目：Lean manufacturing: context, practice bundles, and performance • Article
出处：Journal of Operations Management, Volume 21, Issue 2, March 2003, Pages 129-149
作者：Shah, Rachna; Ward, Peter T
摘要：Management literature has suggested that contextual factors may present strong inertial
forces within organizations that inhibit implementations that appear technically rational [R.R.
Nelson, S.G. Winter, An Evolutionary Theory of Economic Change, Harvard University Press,
Cambridge, MA, 1982]. This paper examines the effects of three contextual factors, plant size,
plant age and unionization status, on the likelihood of implementing 22 manufacturing practices
that are key facets of lean production systems. Further, we postulate four “bundles” of inter-related
and internally consistent practices; these are just-in-time (JIT), total quality management (TQM),
total preventive maintenance (TPM), and human resource management (HRM). We empirically
validate our bundles and investigate their effects on operational performance. The study sample
uses data from IndustryWeek’s Census of Manufacturers. The evidence provides strong support
for the influence of plant size on lean implementation, whereas the influence of unionization and
plant age is less pervasive than conventional wisdom suggests. The results also indicate that lean
bundles contribute substantially to the operating performance of plants, and explain about 23% of
the variation in operational performance after accounting for the effects of industry and contextual
factors.
24. 题目：A review of solar collectors and thermal energy storage in solar thermal applications •
Article
出处：Applied Energy, Volume 104, April 2013, Pages 538-553
作者：Tian, Y.; Zhao, C.Y.
摘要：Thermal applications are drawing increasing attention in the solar energy research field, due
to their high performance in energy storage density and energy conversion efficiency. In these
applications, solar collectors and thermal energy storage systems are the two core components.
This paper focuses on the latest developments and advances in solar thermal applications,
providing a review of solar collectors and thermal energy storage systems. Various types of solar
collectors are reviewed and discussed, including both non-concentrating collectors (low
temperature applications) and concentrating collectors (high temperature applications). These are
studied in terms of optical optimisation, heat loss reduction, heat recuperation enhancement and
different sun-tracking mechanisms. Various types of thermal energy storage systems are also
20
reviewed and discussed, including sensible heat storage, latent heat storage, chemical storage and
cascaded storage. They are studied in terms of design criteria, material selection and different heat
transfer enhancement technologies. Last but not least, existing and future solar power stations are
overviewed.
25. 题目：A framework for supply chain performance measurement • Article
出处：International Journal of Production Economics, Volume 87, Issue 3, February 2004, Pages
333-347
作者：Gunasekaran, A; Patel, C; McGaughey, Ronald E
摘要：Supply chain management (SCM) has been a major component of competitive strategy to
enhance organizational productivity and profitability. The literature on SCM that deals with
strategies and technologies for effectively managing a supply chain is quite vast. In recent years,
organizational performance measurement and metrics have received much attention from
researchers and practitioners. The role of these measures and metrics in the success of an
organization cannot be overstated because they affect strategic, tactical and operational planning
and control. Performance measurement and metrics have an important role to play in setting
objectives, evaluating performance, and determining future courses of actions. Performance
measurement and metrics pertaining to SCM have not received adequate attention from
researchers or practitioners. We developed a framework to promote a better understanding of the
importance of SCM performance measurement and metrics. Using the current literature and the
results of an empirical study of selected British companies, we developed the framework
presented herein, in hopes that it would stimulate more interest in this important area.
三、IEL Top20
（来源：http://ieeexplore.ieee.org/）
1.题目：Cloud computing-based forensic analysis for collaborative network security management
system
作者：Chen, Zhen ; Han, Fuye ; Cao, Junwei ; Jiang, Xin ; Chen, Shuo
出处：Tsinghua Science and Technology Volume: 18 Issue: 1 Date : Feb. 2013
Page(s): 40 - 50
Digital Object Identifier : 10.1109/TST.2013.6449406
摘要：Internet security problems remain a major challenge with many security concerns such as
Internet worms, spam, and phishing attacks. Botnets, well-organized distributed network attacks,
consist of a large number of bots that generate huge volumes of spam or launch Distributed Denial
21
of Service (DDoS) attacks on victim hosts. New emerging botnet attacks degrade the status of
Internet security further. To address these problems, a practical collaborative network security
management system is proposed with an effective collaborative Unified Threat Management
(UTM) and traffic probers. A distributed security overlay network with a centralized security
center leverages a peer-to-peer communication protocol used in the UTMs collaborative module
and connects them virtually to exchange network events and security rules. Security functions for
the UTM are retrofitted to share security rules. In this paper, we propose a design and
implementation of a cloud-based security center for network security forensic analysis. We
propose using cloud storage to keep collected traffic data and then processing it with cloud
computing platforms to find the malicious attacks. As a practical example, phishing attack forensic
analysis is presented and the required computing and storage resources are evaluated based on real
trace data. The cloud-based security center can instruct each collaborative UTM and prober to
collect events and raw traffic, send them back for deep analysis, and generate new security rules.
These new security rules are enforced by collaborative UTM and the feedback events of such rules
are returned to the security center. By this type of close-loop control, the collaborative network
security management system can identify and address new distributed attacks more quickly and
effectively.
2.题目：Security threats in cloud computing
作者：Shaikh, F.B. ; Haider, S.
出处：Internet Technology and Secured Transactions (ICITST), 2011 International Conference for
Date : 11-14 Dec. 2011 Page(s): 214 - 219
摘要：Cloud computing is set of resources and services offered through the Internet. Cloud
services are delivered from data centers located throughout the world. Cloud computing facilitates
its consumers by providing virtual resources via internet. General example of cloud services is
Google apps, provided by Google and Microsoft SharePoint. The rapid growth in field of “cloud
computing” also increases severe security concerns. Security has remained a constant issue for
Open Systems and internet, when we are talking about security cloud really suffers. Lack of
security is the only hurdle in wide adoption of cloud computing. Cloud computing is surrounded
by many security issues like securing data, and examining the utilization of cloud by the cloud
computing vendors. The wide acceptance www has raised security risks along with the
uncountable benefits, so is the case with cloud computing. The boom in cloud computing has
brought lots of security challenges for the consumers and service providers. How the end users of
cloud computing know that their information is not having any availability and security issues?
Every one poses, Is their information secure? This study aims to identify the most vulnerable
security threats in cloud computing, which will enable both end users and vendors to know about
the key security threats associated with cloud computing. Our work will enable researchers and
security professionals to know about users and vendors concerns and critical analysis about the
different security models and tools proposed.
3.题目：Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!
作者：Rappaport, T.S. ; Shu Sun ; Mayzus, R. ; Hang Zhao ; Azar, Y. ; Wang, K. ; Wong, G.N. ;
Schulz, J.K. ; Samimi, M. ; Gutierrez, F.
出处：Access, IEEE
Volume: 1 Date : 2013
Page(s): 335 - 349
22
Digital Object Identifier : 10.1109/ACCESS.2013.2260813
摘要：The global bandwidth shortage facing wireless carriers has motivated the exploration of the
underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular
communication networks. There is, however, little knowledge about cellular mm-wave
propagation in densely populated indoor and outdoor environments. Obtaining this information is
vital for the design and operation of future fifth generation cellular networks that use the
mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems,
methodology, and hardware for measurements and offer a variety of measurement results that
show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at
base stations and mobile devices.
4.题目：A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking
作者：Arulampalam, M.S. ; Maskell, S. ; Gordon, N. ; Clapp, T.
出处：Signal Processing, IEEE Transactions on
Volume: 50 Issue: 2 Date : Feb 2002
Page(s): 174 - 188
Digital Object Identifier : 10.1109/78.978374
摘要：Increasingly, for many application areas, it is becoming important to include elements of
nonlinearity and non-Gaussianity in order to model accurately the underlying dynamics of a
physical system. Moreover, it is typically crucial to process data on-line as it arrives, both from the
point of view of storage costs as well as for rapid adaptation to changing signal characteristics. In
this paper, we review both optimal and suboptimal Bayesian algorithms for
nonlinear/non-Gaussian tracking problems, with a focus on particle filters. Particle filters are
sequential Monte Carlo methods based on point mass (or "particle") representations of probability
densities, which can be applied to any state-space model and which generalize the traditional
Kalman filtering methods. Several variants of the particle filter such as SIR, ASIR, and RPF are
introduced within a generic framework of the sequential importance sampling (SIS) algorithm.
These are discussed and compared with the standard EKF through an illustrative example
5.题目：Compressed sensing
作者：Donoho, D.L.
出处：Information Theory, IEEE Transactions on Volume: 52 Issue: 4 Date : April 2006
Page(s): 1289 - 1306
Digital Object Identifier : 10.1109/TIT.2006.871582
摘要：Suppose x is an unknown vector in Ropfm (a digital image or signal); we plan to measure n
general linear functionals of x and then reconstruct. If x is known to be compressible by transform
coding with a known transform, and we reconstruct via the nonlinear procedure defined here, the
number of measurements n can be dramatically smaller than the size m. Thus, certain natural
classes of images with m pixels need only n=O(m1/4log5/2(m)) nonadaptive nonpixel samples for
faithful recovery, as opposed to the usual m pixel samples. More specifically, suppose x has a
sparse representation in some orthonormal basis (e.g., wavelet, Fourier) or tight frame (e.g.,
curvelet, Gabor)-so the coefficients belong to an lscrp ball for 0<ples1. The N most important
coefficients in that expansion allow reconstruction with lscr2 error O(N1/2-1p/). It is possible to
design n=O(Nlog(m)) nonadaptive measurements allowing reconstruction with accuracy
comparable to that attainable with direct knowledge of the N most important coefficients.
23
Moreover, a good approximation to those N important coefficients is extracted from the n
measurements by solving a linear program-Basis Pursuit in signal processing. The nonadaptive
measurements have the character of "random" linear combinations of basis/frame elements. Our
results use the notions of optimal recovery, of n-widths, and information-based complexity. We
estimate the Gel'fand n-widths of lscrp balls in high-dimensional Euclidean space in the case
0<ples1, and give a criterion identifying near- optimal subspaces for Gel'fand n-widths. We show
that "most" subspaces are near-optimal, and show that convex optimization (Basis Pursuit) is a
near-optimal way to extract information derived from these near-optimal subspaces
6.题目：Design Considerations for Interleaved ADCs
作者：Razavi, B.
出处：Solid-State Circuits, IEEE Journal of
Volume: 48 Issue: 8 Date : Aug. 2013
Page(s): 1806 - 1817
Digital Object Identifier : 10.1109/JSSC.2013.2258814
摘要：Interleaving can relax the power-speed tradeoffs of analog-to-digital converters and reduce
their metastability error rate while increasing the input capacitance. This paper quantifies the
benefits and derives an upper bound on the performance by considering kT/C noise and slewing
requirements of the circuit driving the system. A frequency-domain analysis of interleaved
converters is also presented that sheds light on the corruption mechanisms due to interchannel
mismatches. A background timing mismatch calibration technique is proposed and experimentally
shown to reduce the image to -75 dB for input frequencies exceeding 500 MHz.
7.题目：On a Future for Power Electronics
作者：van Wyk, J.D. ; Lee, F.C.
出处：Emerging and Selected Topics in Power Electronics, IEEE Journal of
Volume: 1 Issue: 2 Date : June 2013
Page(s): 59 - 72
Digital Object Identifier : 10.1109/JESTPE.2013.2271499
摘要：This paper presents a historical and philosophical perspective on a possible future for power
electronics. Technologies have specific life cycles that are driven by internal innovation,
subsequently reaching maturity. Power electronics appears to be a much more complex case,
functioning as an enabling technology spanning an enormous range of power levels, functions and
applications. Power electronics is also divided into many constituent technologies. Till now, the
development of power electronics has been driven chiefly by internal semiconductor technology
and converter circuit technology, approaching maturity in its internally set metrics, such as
efficiency. This paper examines critically the fundamental functions found in electronic energy
processing, the constituent technologies comprising power electronics, and the power electronics
technology space in light of the internal driving philosophy of power electronics and its historical
development. It is finally concluded that, although approaching the limits of its internal metrics
indicates internal maturity, the external constituent technologies of packaging, manufacturing,
electromagnetic and physical impact, and converter control technology still present remarkable
opportunities for development. As power electronics is an enabling technology, its development,
together with internal developments, such as wide bandgap semiconductors, will be driven
externally by applications in the future.
24
8.题目：Data Mining with Big Data
作者：Wu, X. ; Zhu, X. ; Wu, G. ; Ding, W.
出处： Knowledge and Data Engineering, IEEE Transactions on
Volume: PP Issue: 99
Page(s): 1
Digital Object Identifier : 10.1109/TKDE.2013.109
摘要：Big Data concerns large-volume, complex, growing data sets with multiple, autonomous
sources. With the fast development of networking, data storage, and the data collection capacity,
Big Data is now rapidly expanding in all science and engineering domains, including physical,
biological and bio-medical sciences. This article presents a HACE theorem that characterizes the
features of the Big Data revolution, and proposes a Big Data processing model, from the data
mining perspective. This data-driven model involves demand-driven aggregation of information
sources, mining and analysis, user interest modeling, and security and privacy considerations. We
analyze the challenging issues in the data-driven model and also in the Big Data revolution.
9.题目：Image Processing Using Smooth Ordering of its Patches
作者：Ram, I. ; Elad, M. ; Cohen, I.
出处：Image Processing, IEEE Transactions on Volume: 22 Issue: 7 Date : July 2013
Page(s): 2764 - 2774
Digital Object Identifier : 10.1109/TIP.2013.2257813
摘要：We propose an image processing scheme based on reordering of its patches. For a given
corrupted image, we extract all patches with overlaps, refer to these as coordinates in
high-dimensional space, and order them such that they are chained in the “shortest possible path,”
essentially solving the traveling salesman problem. The obtained ordering applied to the corrupted
image implies a permutation of the image pixels to what should be a regular signal. This enables
us to obtain good recovery of the clean image by applying relatively simple one-dimensional
smoothing operations (such as filtering or interpolation) to the reordered set of pixels. We explore
the use of the proposed approach to image denoising and inpainting, and show promising results in
both cases.
10.题目：Are we ready for SDN? Implementation challenges for software-defined networks
作者：Sezer, S. ; Scott-Hayward, S. ; Chouhan, P.K. ; Fraser, B. ; Lake, D. ; Finnegan, J. ; Viljoen,
N. ; Miller, M. ; Rao, N.
出处：Communications Magazine, IEEE
Volume: 51 Issue: 7 Date : July 2013
Digital Object Identifier : 10.1109/MCOM.2013.6553676
摘要：Cloud services are exploding, and organizations are converging their data centers in order to
take advantage of the predictability, continuity, and quality of service delivered by virtualization
technologies. In parallel, energy-efficient and high-security networking is of increasing
importance. Network operators, and service and product providers require a new network solution
to efficiently tackle the increasing demands of this changing network landscape. Software-defined
networking has emerged as an efficient network technology capable of supporting the dynamic
nature of future network functions and intelligent applications while lowering operating costs
through simplified hardware, software, and management. In this article, the question of how to
achieve a successful carrier grade network with software-defined networking is raised. Specific
focus is placed on the challenges of network performance, scalability, security, and interoperability
25
with the proposal of potential solution directions.
11.题目：LTE release 12 and beyond [Accepted From Open Call]
作者：Astely, D. ; Dahlman, E. ; Fodor, G. ; Parkvall, S. ; Sachs, J.
出处：Communications Magazine, IEEE
Volume: 51 Issue: 7 Date : July 2013
Digital Object Identifier : 10.1109/MCOM.2013.6553692
摘要：As the specification of Release 11 of the LTE standards is approaching its completion, 3GPP
is gradually moving its focus toward the next major step in the evolution of LTE. The drivers of
the LTE evolution include the increasing demand for mobile broadband services and traffic
volumes as well as emerging usage scenarios involving short-range and machine-type
communications. In this article we provide an overview of the key technology areas/components
that are currently considered by 3GPP for Rel-12, including support for further enhanced local
area access by tight interaction between the wide area and local area layers, signaling solutions for
wireless local area network integration, multi-antenna enhancements, improved support for
massive MTC, and direct device-to-device communications.
12.题目：Representation Learning: A Review and New Perspectives
作者：Bengio, Y. ; Courville, A. ; Vincent, P.
出处：Pattern Analysis and Machine Intelligence, IEEE Transactions on
Volume: 35 Issue: 8 Date : Aug. 2013
Page(s): 1798 - 1828
Digital Object Identifier : 10.1109/TPAMI.2013.50
摘要：The success of machine learning algorithms generally depends on data representation, and
we hypothesize that this is because different representations can entangle and hide more or less the
different explanatory factors of variation behind the data. Although specific domain knowledge
can be used to help design representations, learning with generic priors can also be used, and the
quest for AI is motivating the design of more powerful representation-learning algorithms
implementing such priors. This paper reviews recent work in the area of unsupervised feature
learning and deep learning, covering advances in probabilistic models, autoencoders, manifold
learning, and deep networks. This motivates longer term unanswered questions about the
appropriate objectives for learning good representations, for computing representations (i.e.,
inference), and the geometrical connections between representation learning, density estimation,
and manifold learning.
13.题目：An Introduction To Compressive Sampling
作者：Candes, E.J. ; Wakin, M.B.
出处：Signal Processing Magazine, IEEE
Volume: 25 Issue: 2 Date : March 2008
Page(s): 21 - 30
Digital Object Identifier : 10.1109/MSP.2007.914731
摘要：Conventional approaches to sampling signals or images follow Shannon's theorem: the
sampling rate must be at least twice the maximum frequency present in the signal (Nyquist rate).
In the field of data conversion, standard analog-to-digital converter (ADC) technology implements
the usual quantized Shannon representation - the signal is uniformly sampled at or above the
Nyquist rate. This article surveys the theory of compressive sampling, also known as compressed
sensing or CS, a novel sensing/sampling paradigm that goes against the common wisdom in data
26
acquisition. CS theory asserts that one can recover certain signals and images from far fewer
samples or measurements than traditional methods use.
14.题目：Evolving and Emerging Applications of Power Electronics in Systems
作者：Kassakian, J.G. ; Jahns, T.M.
出处：Emerging and Selected Topics in Power Electronics, IEEE Journal of
Volume: 1 Issue: 2 Date : June 2013
Page(s): 47 - 58
Digital Object Identifier : 10.1109/JESTPE.2013.2271111
摘要：The continuing trend toward greater electrification and control of functions in consumer,
commercial, industrial, transportation, and even medical applications promises a dynamic and
increasingly important role for power electronics. The growing penetration of power electronics in
energy systems is driven by new materials such as SiC and GaN, as well as new packaging
technologies which allow the physical integration of electronics with powered and controlled
devices such as motors. Advances in very high-frequency conversion led by the application of SiC
and GaN devices promises to make converter-on-a-chip technology possible, but concurrent
advances in passive component technology are necessary. The principal challenge to application
penetration remains cost reduction.
15.题目：MobSafe: cloud computing based forensic analysis for massive mobile applications
using data mining
作者：Xu, J. ; Yu, Y. ; Chen, Z. ; Cao, B. ; Dong, W. ; Guo, Y. ; Cao, J.
出处：Tsinghua Science and Technology
Volume: 18 Issue: 4 Date : August 2013
Digital Object Identifier : 10.1109/TST.2013.6574680
摘要：With the explosive increase in mobile apps, more and more threats migrate from traditional
PC client to mobile device. Compared with traditional Win+Intel alliance in PC, Android+ARM
alliance dominates in Mobile Internet, the apps replace the PC client software as the major target
of malicious usage. In this paper, to improve the security status of current mobile apps, we
propose a methodology to evaluate mobile apps based on cloud computing platform and data
mining. We also present a prototype system named MobSafe to identify the mobile app??s
virulence or benignancy. Compared with traditional method, such as permission pattern based
method, MobSafe combines the dynamic and static analysis methods to comprehensively evaluate
an Android app. In the implementation, we adopt Android Security Evaluation Framework (ASEF)
and Static Android Analysis Framework (SAAF), the two representative dynamic and static
analysis methods, to evaluate the Android apps and estimate the total time needed to evaluate all
the apps stored in one mobile app market. Based on the real trace from a commercial mobile app
market called AppChina, we can collect the statistics of the number of active Android apps, the
average number apps installed in one Android device, and the expanding ratio of mobile apps. As
mobile app market serves as the main line of defence against mobile malwares, our evaluation
results show that it is practical to use cloud computing platform and data mining to verify all
stored apps routinely to filter out malware apps from mobile app markets. As the future work,
MobSafe can extensively use machine learning to conduct automotive forensic analysis of mobile
apps based on the generated multifaceted data in this stage.
16.题目：Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A
27
Survey
作者：Carrasco, J.M. ; Franquelo, L.G. ; Bialasiewicz, J.T. ; Galvan, E. ; Guisado, R.C.P. ; Prats,
Ma.A.M. ; Leon, J.I. ; Moreno-Alfonso, N.
出处：Industrial Electronics, IEEE Transactions on
Volume: 53 Issue: 4 Date : June 2006
Page(s): 1002 - 1016
Digital Object Identifier : 10.1109/TIE.2006.878356
摘要：The use of distributed energy resources is increasingly being pursued as a supplement and
an alternative to large conventional central power stations. The specification of a power-electronic
interface is subject to requirements related not only to the renewable energy source itself but also
to its effects on the power-system operation, especially where the intermittent energy source
constitutes a significant part of the total system capacity. In this paper, new trends in power
electronics for the integration of wind and photovoltaic (PV) power generators are presented. A
review of the appropriate storage-system technology used for the integration of intermittent
renewable energy sources is also introduced. Discussions about common and future trends in
renewable energy systems based on reliability and maturity of each technology are presented
17.题目：A Computational Approach to Edge Detection
作者：Canny, John
出处：Pattern Analysis and Machine Intelligence, IEEE Transactions on
Volume: PAMI-8 Issue: 6 Date : Nov. 1986
Page(s): 679 - 698
Digital Object Identifier : 10.1109/TPAMI.1986.4767851
摘要：This paper describes a computational approach to edge detection. The success of the
approach depends on the definition of a comprehensive set of goals for the computation of edge
points. These goals must be precise enough to delimit the desired behavior of the detector while
making minimal assumptions about the form of the solution. We define detection and localization
criteria for a class of edges, and present mathematical forms for these criteria as functionals on the
operator impulse response. A third criterion is then added to ensure that the detector has only one
response to a single edge. We use the criteria in numerical optimization to derive detectors for
several common image features, including step edges. On specializing the analysis to step edges,
we find that there is a natural uncertainty principle between detection and localization
performance, which are the two main goals. With this principle we derive a single operator shape
which is optimal at any scale. The optimal detector has a simple approximate implementation in
which edges are marked at maxima in gradient magnitude of a Gaussian-smoothed image. We
extend this simple detector using operators of several widths to cope with different signal-to-noise
ratios in the image. We present a general method, called feature synthesis, for the fine-to-coarse
integration of information from operators at different scales. Finally we show that step edge
detector performance improves considerably as the operator point spread function is extended
along the edge.
18.题目：Medical and Biological Engineering in the Next 20 Years: The Promise and the
Challenges
作者：American Institute for Medical and Biological Engineering, C
出处：Biomedical Engineering, IEEE Transactions on
Volume: 60 Issue: 7 Date : July 2013
Page(s): 1767 - 1775
28
Digital Object Identifier : 10.1109/TBME.2013.2264829
摘要：In 2011, the American Institute for Medical and Biological Engineering (AIMBE)
(www.aimbe.org) celebrated its 20th anniversary by undertaking to identify major societal
challenges to which medical and biological engineers can contribute solutions in the next 20 years.
This report is a summary of the six major challenges that were identified. The report also
discusses some specific areas within these high-level challenges that can form the basis for policy
action, provides a brief rationale for pursuing those areas, and discusses roadblocks to progress.
The six overarching challenges are: 1) engineering safe and sustainable water and food supply, 2)
engineering personalized health care, 3) engineering solutions to injury and chronic diseases, 4)
engineering global health through infectious disease prevention and therapy, 5) engineering
sustainable bioenergy production, and 6) engineering the 21st century US economy. While arrived
at independently by AIMBE, many of the elements overlap with similar challenges identified by
other bodies. The similarities highlight the central mission of medical and biological engineers,
working with other experts, which is to solve important problems central to human health and
welfare.
19.题目：Histograms of oriented gradients for human detection
作者：Dalal, N. ; Triggs, B.
出处：Computer Vision and Pattern Recognition, 2005. CVPR 2005. IEEE Computer Society
Conference on
Volume: 1 Date : 25-25 June 2005
Page(s): 886 - 893 vol. 1
Digital Object Identifier : 10.1109/CVPR.2005.177
摘要：We study the question of feature sets for robust visual object recognition; adopting linear
SVM based human detection as a test case. After reviewing existing edge and gradient based
descriptors, we show experimentally that grids of histograms of oriented gradient (HOG)
descriptors significantly outperform existing feature sets for human detection. We study the
influence of each stage of the computation on performance, concluding that fine-scale gradients,
fine orientation binning, relatively coarse spatial binning, and high-quality local contrast
normalization in overlapping descriptor blocks are all important for good results. The new
approach gives near-perfect separation on the original MIT pedestrian database, so we introduce a
more challenging dataset containing over 1800 annotated human images with a large range of pose
variations and backgrounds.
20.题目：An Efficient and Secure Dynamic Auditing Protocol for Data Storage in Cloud
Computing
作者：Kan Yang ; Xiaohua Jia
出处：Parallel and Distributed Systems, IEEE Transactions on
Volume: 24 Issue: 9 Date : Sept. 2013
Page(s): 1717 - 1726
Digital Object Identifier : 10.1109/TPDS.2012.278
摘要：In cloud computing, data owners host their data on cloud servers and users (data consumers)
can access the data from cloud servers. Due to the data outsourcing, however, this new paradigm
of data hosting service also introduces new security challenges, which requires an independent
auditing service to check the data integrity in the cloud. Some existing remote integrity checking
methods can only serve for static archive data and, thus, cannot be applied to the auditing service
since the data in the cloud can be dynamically updated. Thus, an efficient and secure dynamic
29
auditing protocol is desired to convince data owners that the data are correctly stored in the cloud.
In this paper, we first design an auditing framework for cloud storage systems and propose an
efficient and privacy-preserving auditing protocol. Then, we extend our auditing protocol to
support the data dynamic operations, which is efficient and provably secure in the random oracle
model. We further extend our auditing protocol to support batch auditing for both multiple owners
and multiple clouds, without using any trusted organizer. The analysis and simulation results show
that our proposed auditing protocols are secure and efficient, especially it reduce the computation
cost of the auditor.
四、ACM 最新会议
（来源：http://www.acm.org/）
1. 会议名称：ACM Conference on Bioinformatics, Computational Biology and Biomedical
Informatics (ACM BCB)（BCB'13）
会议时间：September 22 - September 25 2013
会议地点：
会议简介：Wshington DC USA
ACM-BCB 2013 Call for Papers
The ACM Conference on Bioinformatics, Computational Biology and Biomedical Informatics
(ACM BCB) is the flagship conference of the ACM SIGBio. This is the conference’s fourth year,
building upon the success of the first three meetings in Niagara Falls, Chicago, and Orlando.
ACM BCB 2013 will be held in Washington D.C. from September 22-25, 2013. The conference
offers a forum for premier interdisciplinary research linking computer science, mathematics,
statistics, biology, bioinformatics, and biomedical informatics. The past two decades have led to a
tremendous growth in the size and dimensionality of biological and biomedical data. This
conference serves to showcase leading-edge research in processing, modeling and analyzing these
datasets for a variety of applications.
ACM BCB 2013 welcomes original submissions that have not been published and that are not
under review by another conference or journal. Examples of relevant topics include but are not
limited to:
Genomics and Evolution
Protein and RNA Structure, Protein Function, and Proteomics
Computational Systems Biology
Next Generation Sequencing Data
Medical Informatics and Translational Bioinformatics
Cross-Cutting Computational Methods
Bioinformatics Infrastructure
30
Immunoinformatics and Computational Immunology
Computational Epidemiology
Biomedical Image Analysis
Knowledge Representation and Inference
Integration of Biomedical Data
Databases, Knowledgebases & Ontologies
Text Mining and Natural Language Processing
论文提交：http://www.cse.buffalo.edu/ACM-BCB2013/callforpapers.html
2. 会议名称：Embedded Systems Week （ESWEEK'13)
会议时间：September 29 - October 04 2013
会议地点：
会议简介：1 Place du Canada, Montreal QC Canada
Updates
September 2013: Two free ARM University Program Embedded Tutorials announced!
August 2013: Industrial Panels announced!
Aug 2013: 3 Keynotes announced!
July 2013: Conference registration is now open. Early bird registration deadline is Sept 06, 2013.
July 2013: Advance program is now online.
June 2013: Hotel Reservation at conference location, Montréal Marriott Chateau Champlain Hotel
at discounted room rate of $179.00 is now open.
March 2013: Follow the link to the specific conference for paper submission. Abstract should be
in plain text with less than 300 words.
Jan 2013: ESWEEK webpage launched
About Embedded Systems Week
Embedded Systems Week (ESWEEK) is the premier event covering all aspects of embedded
systems and software. By bringing together three leading conferences (CASES, CODES+ISSS,
and EMSOFT), two symposia (ESTIMedia and RSP) and several workshops and tutorials,
ESWeek allows attendees to benefit from a wide range of topics covering the state of the art in
embedded systems research and development.
One registration, three conferences
Registered attendees will be allowed to attend sessions in the other conference and tutorials for
free: CASES 2013, CODES+ISSS 2013, EMSOFT 2013. Please note that symposia and
workshops may require separate registration.
Conferences
International Conference on Compilers, Architecture, and Synthesis for Embedded Systems
International Conference on Hardware - Software Codesign and System Synthesis
International Conference on Embedded Software
Symposia
ESTIMedia: IEEE Symposium on Embedded Systems for Real-time Multimedia
RSP: IEEE International Symposium on Rapid System Prototyping
Keynotes
Monday Keynote: Cyber Physical Systems: Systems Engineering of Industrial Embedded Systems
- Barriers, Enablers and Opportunities
31
Speaker: Clas A. Jacobson, Chief Scientist, United Technologies Systems & Controls Engineering
Tuesday Keynote: High-Performance, Scalable, General-Purpose Processors to Accelerate
High-Throughput Networking and Security Applications
Speaker: Richard Schooler, Vice President Software Engineering, Tilera Corp.
Wednesday Keynote: Low-Power High-Performance Asynchronous Processors
Speaker: Michel Laurence, CEO and Co-Founder, Octasic Inc.
Industrial Panels
Monday Industry Panel: System-Level Design and High-Level Synthesis
Organizer and Moderator: Andreas Gerstlauer (Univ. of Texas)
Speakers: Yatin Hoskote (Intel), Rishiyur Nikhil (Bluespec), John Sanguinetti (Forte), and Andres
Takach (Calypto).
Tuesday Industry Panel: Modeling Complex Industrial Systems
Organizer and Moderator: Alessandro Pinto (UTRC)
Speakers: Alberto Ferrari (Ales), Pieter Mosterman (The Mathworks), and Claudio Pinello
(UTRC).
Tutorials
Tutorial 1: Methodologies and Tools for Embedded Multisensory Systems Based on ARM
Cortex-M Processors
Organizer and Speaker: Zeljko Zilic (McGill University, Canada)
Format: Full-day; Lectures/Labs
Tutorial 2:AADLv2, an Architecture Description Language for the Analysis and Generation of
Embedded Systems
Organizers and Speakers: Jérôme Hugues (ISAE/DMIA, Toulouse, France) and Frank Singhoff
(UBO/Lab-STICC, Brest, France)
Format: Half-day; Lectures and tools
Tutorial 3: Cross-Layer Reliability Modeling and Optimization for Embedded Systems under
Process Variations
Organizers and Speakers: Muhammad Shafique (Karlsruhe Institute of Technology, Germany),
Puneet Gupta (University of California - Los Angeles, US), Hiren Patel (University of Waterloo,
Canada), and Siddharth Garg (University of Waterloo, Canada)
Format: Half-Day; Lectures, demos of tools
Tutorial 4: Mixed-Criticality Systems: Design and Certification Challenges
Organizers: Madeleine Faugère (Thales Research and Technology, France), Nikolay Stoimenov
(ETH Zurich, Switzerland), Lothar Thiele (ETH Zurich, Switzerland)
Speakers: Madeleine Faugere (Thales Research and Technology, France), James Anderson
(University of North Carolina at Chapel Hill, US), Claire Pagetti (Onera, France), Pierre Bieber
(Onera, France), Virginie Wiels (Onera, France), and Marc Gatti (Thales Avionics, France)
Format: Half-day; Lectures
论文提交：http://www.esweek.org/
3. 会议名称：The 18th ACM SIGPLAN International Conference on Functional Programming
（ICFP'13）
会议时间：September 25 - September 27 2013
会议地点：
32
Boston MA USA
会议简介：ICFP 2013 provides a forum for researchers and developers to hear about the latest
work on the design, implementations, principles, and uses of functional programming. The
conference covers the entire spectrum of work, from practice to theory, including its peripheries.
论文提交：http://icfpconference.org/icfp2013/
4. 会议名称： ACM/IEEE 16th International Conference on
Model Driven Engineering Languages and Systems（MODELS '13）
会议时间：September 29 - October 04 2013
会议地点：Miami FL USA
会议简介：ODELS is the premier venue for the exchange of innovative ideas and experiences of
model-based approaches in the development of complex systems. Since 1998, MODELS has
provided a broad forum for reporting scientific progress as well as experiences stemming from
practical application of model-based methods. MODELS is a highly selective conference, with an
acceptance rate averaging 20% in recent years.
The conference series covers all aspects of model-based development for software and systems
engineering, including modeling languages, methods, tools, and their applications. Engineering
models have long been used in the development of complex systems and the approach is
becoming more prevalent in the design of modern software systems.
MODELS 2013 will continue the MODELS history in providing the top forum for researchers and
practitioners to meet and share experiences in software and systems modeling. Traditional events
(e.g., Foundations/Applications track papers, Workshops, Tutorials, and Panels) will represent key
venues for disseminating novel ideas in modeling research. For the 2013 conference,
Demonstrations and Poster sessions will be formalized, along with the first year of the ACM
Student Research Competition at MODELS!
In 2013, MODELS will take place in the midst of Miami’s most popular beach area. As the 5th
largest urban city in the USA, Miami is a major hub for culture, entertainment, arts, and fashion
(e.g., the famous “South Beach” area). Miami has recently been named one of the USA’s cleanest
cities and most walkable cities. With over 14 universities and colleges in the area, Miami also is a
recognized center for education and research. We invite you to join us at this international
conference and to help shape the modeling methods and technologies of the future!
See you in Miami in Fall 2013!
论文提交：http://www.modelsconference.org/
5. 会议名称：SIGDOC'13
会议时间：September 30 - October 01 2013
会议地点：Greenville NC USA
会议简介：You are invited to participate in the Association for Computing Machinery (ACM)
Special Interest Group on the Design of Communication(SIGDOC) 2013 conference, September
30th – October 1st, 2013 in Greenville, North Carolina.
SIGDOC focuses on the design of communication as it is taught, practiced, researched, and
conceptualized. Members of SIGDOC are an interdisciplinary mix of professionals and academics
in information architecture, experience design, user research, content strategy, technical
33
communication, education, information science, and computer science.
This year’s conference theme is “simplifying complexity.” See the Call for Participation page for
details.
论文提交：http://sigdoc.acm.org/2013/call-for-participation/
6. 会议名称：Embedded Systems Week（WESS'13）
会议时间：September 29 - October 04 2013
会议地点：Embedded Systems Week (ESWEEK) is the premier event covering all aspects of 会议
会议简介：embedded systems and software. By bringing together three leading conferences
(CASES, CODES+ISSS, and EMSOFT), two symposia (ESTIMedia and RSP) and several
workshops and tutorials, ESWeek allows attendees to benefit from a wide range of topics covering
the state of the art in embedded systems research and development.
论文提交：http://www.esweek.org/
7. 会议名称：The 15th International Workshop on Mobile Computing Systems and Applications
会议时间：26-27 February, 2014
会议地点：Santa Barbara California
会议简介：The Fifteenth Workshop on Mobile Computing Systems and Applications (ACM
HotMobile 2014) continues the series of highly selective, interactive workshops focused on
mobile applications, systems, and environments, as well as their underlying state-of-the-art
technologies. HotMobile's small workshop format makes it ideal for processing and discussing
new directions or controversial approaches.
We solicit submissions of position papers that focus primarily on applications and systems and
that propose new directions of research, advocate non-traditional approaches to old (or new) ideas,
or generate controversy and discussion.
论文提交：http://www.hotmobile.org/2014/
8. 会议名称：WH '13: Wireless Health 2013
会议时间：November 1st-3rd
会议地点：Baltimore , MD
USA
会议简介：The Wireless Health annual conference series convenes the vanguard international
research communities in Wireless technologies and mobile health research. Wireless Health 2013,
hosted this year at Johns Hopkins University, invites cutting edge wireless, connected and mobile
health research from engineering, computer science, biomedical and health disciplines.
The fourth annual Wireless Health conference will build upon the successes of Wireless Health
2010, 2011 and 2012, each of which included up to 400 attendees. The mission of the Wireless
Health conference is to provide the highest‐quality academic, health and industrial research
forum to develop an international community that will accelerate the development and adoption of
new technologies for improving health and lowering costs. Central to this mission is the creation
of a nurturing research forum that communicates the latest developments in the field, creates an
opportunity for transdisciplinary collaboration, and provides an archival venue for the progress
being achieved. This unique meeting brings together members of the medical and health research
community, device manufacturers, clinical and health service providers, government leaders, and
34
policy makers. Wireless Health 2013 will offer an outstanding set of peer‐reviewed papers and
abstracts, interactive workshops, emerging application demonstrations, and world‐renowned
invited speakers.
论文提交：http://www.wirelesshealth2013.org/
9. 会议名称：Workshop on Privacy in the Electronic Society
会议时间：November 4th
会议地点：Berlin , Germany
会议简介：The need for privacy-aware policies, regulations, and techniques has been widely
recognized. This workshop discusses the problems of privacy in the global interconnected
societies and possible solutions. The 2013 Workshop, held in conjunction with the ACM CCS
conference, is the twelfth in a yearly forum for papers on all the different aspects of privacy in
today's electronic society.
论文提交：http://wpes2013.di.unimi.it/
10. 会议名称：International Symposium on Computational Models for Life Sciences
会议时间：November 27th-29th
会议地点：Sydney , Australia
会议简介：With an emphasis on the applications of computer, physical, engineering and
mathematical models for solving modern challenging problems in life sciences, the fourth event
CMLS-13 aims to bring biologists, medical/biomedical and health science researchers together
with computational scientists to focus on problems at the frontier of computational life sciences. A
goal of this meeting is that the interactions of scientists across several disciplines will lead to the
identification of new scientific investigations, shape future directions for strategic research, and
help industrial users apply advanced computational techniques for solving practical life science
problems. As another important aspect, CMLS-13 aims to provide opportunities for postgraduate
research students to present latest research results and establish links with experts across several
scientific disciplines. CMLS-13 will consist of invited talks by leading international experts in
computational life sciences, contributed papers, and social programs.
论文提交：http://cmls-conf.org/2013/
五、AIAA 最新会议
（来源：http://www.aiaa.org/）
1. 会议名称：64th International Astronautical Congress
会议时间：23 - 27 September 2013
会议地点：Beijing, China
35
会议简介：The IAC is the one place and time of the year when all space actors come together.
Global, multidisciplinary and covering all space sectors and topics, it offers everyone the latest
space information, developments but above all contacts and potential partnerships.
Each year, the IAC changes country, theme and local organiser, enabling all to learn more about,
and be a part of the world space scene.
The structure behind it
Technical sessions – presenting scientific and technological breakthroughs, these provide the latest
advances in space science, research, technology, exploration, regulation and education
Plenary programme – the latest trends in space research, technology and exploration presented by
the people who drive them, these include expert discussion panels, highlight lectures on dedicates
topics and breaking news on the latest space developments
Associated events – organised to compliment the content of the IAC, covering niche topics or the
needs of dedicated stakeholders within the space community.
Exhibition – the one place where the space sector showcases the latest it offers and develops.
Social programme – introducing the local space and cultural environment
论文提交：http://www.iac2013.org/dct/page/70027
2. 会议名称：International Symposium for Personal and Commercial Spaceflight (ISPCS)
会议时间：16 - 17 October 2013
会议地点：Las Cruces, New Mexico
会议简介：The International Symposium for Personal and Commercial Spaceflight (ISPCS) is the
most relevant, high-value commercial space conference of the year. This year, through two
high-impact days of dynamic dialogue and collaboration, ISPCS will address strategies to manage
the risks and reap the rewards of the rapidly evolving commercial space industry. Handcrafted
panel discussions will examine key industry issues and trends in the high-risk ventures of
developing new platforms for suborbital space and beyond
论文提交：http://www.ispcs.com/
3. 会议名称：32nd Digital Avionics Systems Conference
会议时间：6 - 10 October 2013
会议地点：Syracuse, New York
会议简介：The 32nd DASC is pleased to announce the following 4 guest speakers for our plenary
events. These exceptional leaders and experts represent the span of avionics applications - from air
to space, from civil to military, from past to future.
论文提交：http://www.dasconline.org/
4. 会议名称：31st AIAA International Communications Satellite Systems Conference (ICSSC)
会议时间：14 - 17 October 2013
会议地点：Florence, Italy
会议简介：The 31st AIAA International Communications Satellite SystemsConference (ICSSC)
and the 19th Ka and Broadband Communications, Navigation and Earth Observation Conference,
the two most influential technical conferences on satellite systems, will be held jointly with the
theme: Satellite Systems for the Needs of the 21st Century.
36
Despite the steady progress of wire-line and wireless terrestrialtechnologies satellites are still
playing a key, and often, unique role in oursociety. Although the most successful application of
satellites is representedby direct-to-home digital broadcasting, satellite applications are much
morewidespread, spanning from interactive broadband service provision toterrestrially uncovered
regions directly or indirectly via backhaul services.In addition to individual reach, satellites
provide key functions forgovernments' civil and military needs and for commercial enterprises.
Security and public safety organizations rely on satellites for critical telecommunications, search
and rescue operations, tracking of ships at sea,airplanes, environmental sensing and daily
monitoring, more so during disaster events such as floods, earthquakes, forest fires or tsunami to
name a few. Navigation satellites are nowadays representing a key and often unique high-accuracy
localization technique to complement terrestrial sensors. A multitude of space-borne sensors are
providing essential information about the Earth status for better weather and climate prediction as
well for strategic purposes. These sensors are requiring downloading, processing and distributing a
growing amount of data. Our search for a better understanding of the universe and in particular of
our galaxy calls for unprecedented communication capacity to be relayed to Earth from various
sensors.
Improving on the above capabilities and providing new ways to serve mankind are some of the
challenges the satellite community must face. The conference will explore these challenges and
present new solutions to enhance what satellite scan offer in the various application domains. The
objective of the conference is to provide an in depth exploration of the technical, regulatory,
economic,and marketing issues affecting these new and planned services.
论文提交：http://www.aiaa.org/icssc2013/
5. 会议名称：Satellite Communications (JC-SAT 2013)
会议时间：24 - 25 October 2013
会议地点：Fukuoka, Japan
会议简介：JC-SAT conference will cover technologies and system implementations of satellite
communications as they relate to the areas of mobile, broadcasting and fixed satellite services.
论文提交：http://www.ieice.org/cs/sat/jpn/purpose_e.html
6. 会议名称：22nd International Congress of Mechanical Engineering – COBEM 2013
会议时间：3 - 7 November 2013
会议地点： Ribeirao Preto
会议简介：COBEM, International Congress of Mechanical Engineering, is the most important
event in the field of Mechanical Engineering in Latin America, occurring every two years since
1971. This conference brings together researchers and professionals from the areas of Mechanical
and Industrial Engineering, Bioengineering, Materials Science, Chemical Engineering,
Environmental Engineering, Petroleum, Mechatronics and Aerospace Engineering. Originally
named as Congresso Brasileiro de Engenharia Mecânica, COBEM reached international status in
the year of 2001, with an increasing number of international participants. In its twentieth second
edition, COBEM 2013 will be hosted by the Department of Mechanical Engineering of the São
Carlos School of Engineering, EESC, of the University of São Paulo, USP, in the modern and
thriving city of Ribeirão Preto. The organization of COBEM in 2013 by the São Carlos School of
Engineering coincides with the celebration of the 60th anniversary of the beginning of its
37
activities.
论文提交：http://www.abcm.org.br/cobem2013/
7. 会议名称： Aircraft Survivability Technical Forum 2013
会议时间：5 - 7 November 2013
会议地点：Monterey, California
会议简介：The theme of Aircraft Survivability 2013 is, “Survivability Approach for New and
Non-Developmental Programs.” The goal of this three-day, classified Technical Forum is to foster
technical dialogue and exchange of information on current and emerging threats, and the aircraft
technologies being developed and tested for surviving these threats. This event will address the
challenges posed by today’s fiscal constraints to the survivability of tomorrow’s manned and
unmanned aircraft; the increasing use of government or commercial off-the-shelf (GOTS/COTS)
aircraft and the resulting restrictions of integrating new technologies and lessons learned from
recent conflicts on guiding the selection of future key performance parameters and requirements.
Technology focus areas include: analysis of current and emerging threats to aircraft; effects of
cyber-attacks on aircraft and supporting data systems, effects of electronic warfare, lasers and high
power microwave on aircraft and mission systems; emerging vulnerability and susceptibility
reduction technologies; development of improved countermeasures; development of new tactics,
techniques, and procedures (TTPs) by the warfighter; and risks that apply to civilian aviation.
OVERVIEW
Aircraft Survivability 2013 is a SECRET/U.S. ONLY event with Senior Speakers from
government, industry and academia discussing intelligence forecasts of current and emerging
threats, survivability enhancement technologies being developed to counter these threats, and
warfighters’ reports on lessons learned from recent combat experiences in Afghanistan, Iraq and
Libya. Key presentations will address the effects of current operations on existing and
next-generation aircraft survivability requirements, concepts and investments. Government and
industry experts will also discuss emerging survivability products and innovations that will
enhance the next generation of military and civilian aircraft.
This three-day Technical Forum will begin on Tuesday, November 5, 2013 and run through
Thursday, November 7, 2013. The first day will be devoted to a full day of Tutorial Sessions in
specific areas of interest for both the civil and military aircraft communities. The Tutorials are
organized into two primary sessions (each about 3-4 hours long), with an introduction-level topic
in the morning and a more advanced-level topic in the afternoon. The next two days will be
devoted to the General Session program, consisting of oral presentations and technical poster
papers. The event will feature a Networking Reception on Tuesday evening, extended breaks,
luncheons on Wednesday and Thursday, and a special Networking Dinner on Wednesday evening,
all specifically structured to facilitate relaxed dialog and continuous networking opportunities
among Attendees. Finally, NDIA’s Combat Survivability Division (CSD) will recognize individual
technical and leadership achievements in a formal awards ceremony.
论文提交：http://www.ndia.org/meetings/4940/Pages/default.aspx
8. 会议名称： 16th AIAA Non-Deterministic Approaches Conference
会议时间：13 - 17 January 2014
38
会议地点：National Harbor, Maryland
会 议简 介： The Non-Deterministic Approaches Conference focuses on the wide range of
non-deterministic perspectives, methods, and applications specific to aerospace, including both
probabilistic and non-probabilistic methods, that address high consequence of failure events
associated with the development and operation of aerospace systems
论文提交：http://www.aiaa.org/EventDetail.aspx?id=18411
9. 会议名称：32nd ASME Wind Energy Symposium
会议时间：13 - 17 January 2014
会议地点：National Harbor, Maryland
会议简介：This conference covers the broad range of topics related to wind energy technology for
both land-based and offshore siting. Technical areas of interest include Aerodynamics,
Aeroelasticity, Acoustics, Dynamics and Control, Structures, Structural Dynamics, Materials,
Design, System Engineering and Economics applied to wind energy systems.
论文提交：http://www.aiaa.org/EventDetail.aspx?id=18414
10. 会议名称：52nd AIAA Aerospace Sciences Meeting
会议时间：13 - 17 January 2014
会议地点：National Harbor, Maryland
会议简介：The interdisciplinary nature of aerospace engineering has contributed to tremendous
research advances that have inspired new and novel industrial applications. Some of the
innovative developments of aerospace technologies in recent times include new shock wave
assisted applications in the realm of medicine, drug delivery systems, biotechnology, and
manufacturing, space solar power systems, energy storage systems, fuels cells, use of
supercomputers, development of transdisciplinary computational techniques, and cryogenic
applications. The carbon fiber based composites used as heat shield material during reentry are
today used to manufacture cost-effective artificial limbs for people with physical disabilities. The
manufacturing techniques specially developed for machining components for aerospace
applications have been instrumental in the development of innovative heat exchanger systems for
ground-based applications.
The AIAA Aerospace Sciences Meeting (ASM) is the first major multidisciplinary event of the
year for aerospace scientists and engineers from around the world to share and disseminate the
latest scientific knowledge and research. At ASM, you’ll discover new research that can be applied
to your industry, and you’ll meet the individuals who lead prime and subprime aerospace
corporations, lead and manage government programs, and create business and job opportunities
论文提交：http://www.aiaa.org/EventDetail.aspx?id=18405
39
六、IEEE 最新会议
（来源：http://www.ieee.org/index.html）
1.会议名称：2013 IEEE International Symposium on Electromagnetic Compatibility (EMC 2013)
会议时间：5 Aug - 9 Aug 2013
会议地点：Denver, CO, USA
会 议 简 介 ： The 2013 IEEE Denver EMC Symposium will cover nearly all aspects of
electromagnetic compatibility to offer researchers, practicing engineers, academia, industry, and
government agencies to present their progress, discoveries and share their experiences with
colleagues and friends from around the globe.
论文提交：https://www.ieee.org/conferences_events/conferences/conferencedetails/
index.html?Conf_ID=16341
2.2013 IEEE International Conference on Wireless for Space and Extreme Environments (WiSEE)
会议时间：7 Nov - 9 Nov 2013
会议地点：Baltimore, MD, USA
会议简介：Spaceflight involves critical sensing and communication in extreme environments such
as planetary surfaces, space vehicles, and space habitats. The many challenges faced in space
sensing and communication are extremely diverse and overlap significantly with those found in
many terrestrial examples of extreme environments such as extreme hot or cold locations, extreme
high- or low-pressure environments, critical control loops in aircraft and nuclear power plants,
high-speed rotating equipment, oil/gas pipelines and platforms, etc. All of these environments
pose significant challenges for radio-frequency or optical wireless sensing and communication and
will require the application of a broad range of state of the art technologies in order to generate
reliable and cost effective solutions.
论文提交：https://www.ieee.org/conferences_events/conferences/conferencedetails/index.
html?Conf_ID=30497
3.IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society
会议时间：10 Nov - 13 Nov 2013
会议地点：Austria, Vienna
会议简介：Industrial and manufacturing theory and applications of electronics, controls,
communications, instrumentation and computational intelligence.
论文提交：https://www.ieee.org/conferences_events/conferences/conferencedetails/index.
html?Conf_ID=19023
4.MILCOM 2013 - 2013 IEEE Military Communications Conference
会议时间：17 Nov - 20 Nov 2013
会议地点：San Diego, CA, USA
会 议 简 介 ： MILCOM is the premier international conference and exposition for military
communications. It gathers the leading minds of government, military, industry and academia in
40
an interactive forum to further explore, define and leverage the benefits networks bring to today s
and tomorrow s challenges.
论文提交：https://www.ieee.org/conferences_events/conferences/conferencedetails/
index.html?Conf_ID=30370
5.2013 IEEE 52nd Annual Conference on Decision and Control (CDC)
会议时间：10 Dec - 13 Dec 2013
会议地点：Firenze, Italy
会议简介：The 52nd IEEE Conference on Decision and Control will be held Tuesday through
Friday, December 10-13, 2013 at the Congress Centre in Firenze, Italy. The CDC annually brings
together an international community of researchers and practitioners in the field of automatic
control to discuss the latest advancements of the discipline, shape its future directions, and
promote its diffusion among the scientific community at large. The 52nd CDC will feature the
presentation of contributed and invited papers, as well as tutorial sessions and workshops. The
CDC is hosted by the IEEE Control Systems Society (CSS), and is organized in cooperation with
the Society for Industrial and Applied Mathematics (SIAM), the Institute for Operations Research
and the Management Sciences (INFORMS), the Japanese Society for Instrument and Control
Engineers (SICE), and the European Union Control Association (EUCA).
论文提交：https://www.ieee.org/conferences_events/conferences/conferencedetails/index.
html?Conf_ID=20427
七、ESI HOT PAPERS（ENGINEERING）
（来源：http://www.webofknowledge.com/?DestApp=ESI）
1 被引用次数: Citations: 322
题目: NEW WORLD RECORD EFFICIENCY FOR CU(IN,GA)SE-2 THIN-FILM SOLAR
CELLS BEYOND 20%
作者: JACKSON P; HARISKOS D; LOTTER E; PAETEL S; WUERZ R; MENNER R;
WISCHMANN W; POWALLA M
出处: PROG PHOTOVOLTAICS 19 (7): 894-897 Sp. Iss. SI NOV 2011
摘要: In this contribution, we present a new certified world record efficiency of 20.1 and 20.3%
for Cu(In,Ga)Se-2 thin-film solar cells. We analyse the characteristics of solar cells on such a
performance level and demonstrate a high degree of reproducibility. Copyright (C) 2011 John
Wiley & Sons, Ltd.
2 被引用次数: Citations: 239
题目: SOLAR CELL EFFICIENCY TABLES (VERSION 39)
作者:GREEN MA; EMERY K; HISHIKAWA Y; WARTA W; DUNLOP ED
出处: PROG PHOTOVOLTAICS 20 (1): 12-20 JAN 2012
41
摘要: Consolidated tables showing an extensive listing of the highest independently confirmed
efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these
tables are outlined, and new entries since July 2011 are reviewed. Copyright (c) 2011 John Wiley
& Sons, Ltd.
3 被引用次数: Citations: 197
题 目 : ICTAC KINETICS COMMITTEE RECOMMENDATIONS FOR PERFORMING
KINETIC COMPUTATIONS ON THERMAL ANALYSIS DATA
作者:
VYAZOVKIN S;
BURNHAM AK; CRIADO JM; PEREZ-MAQUEDA LA;
POPESCU C; SBIRRAZZUOLI N
出处: THERMOCHIM ACTA 520 (1-2): 1-19 JUN 10 2011
摘要: The present recommendations have been developed by the Kinetics Committee of the
International Confederation for Thermal Analysis and Calorimetry (ICTAC). The
recommendations offer guidance for reliable evaluation of kinetic parameters (the activation
energy, the pre-exponential factor, and the reaction model) from the data obtained by means of
thermal analysis methods such as thermogravimetry (TGA), differential scanning calorimetry
(DSC), and differential thermal analysis (DTA). The recommendations cover the most common
kinetic methods, model-free (isoconversional) as well as model-fitting. The focus is on the
problems faced by various kinetic methods and on the ways how these problems can be resolved.
Recommendations on making reliable kinetic predictions are also provided. The objective of these
recommendations is to help a non-expert with efficiently performing analysis and interpreting its
results. (C) 2011 Elsevier B.V. All rights reserved.
4 被引用次数: Citations: 131
题目: SOLAR CELL EFFICIENCY TABLES (VERSION 38)
作者: GREEN MA; EMERY K; HISHIKAWA Y; WARTA W; DUNLOP ED
出处: PROG PHOTOVOLTAICS 19 (5): 565-572 AUG 2011
摘要: Consolidated tables showing an extensive listing of the highest independently confirmed
efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these
tables are outlined and new entries since January, 2011 are reviewed. Copyright (C) 2011 John
Wiley & Sons, Ltd.
5 被引用次数: Citations: 97
题 目 : DEVICE CHARACTERISTICS OF A 10.1% HYDRAZINE-PROCESSED
CU2ZNSN(SE,S)4 SOLAR CELL
作者:
BARKHOUSE DAR; GUNAWAN O; GOKMEN T; TODOROV TK; MITZI DB
出处: PROG PHOTOVOLTAICS 20 (1): 6-11 JAN 2012
摘要: A power conversion efficiency record of 10.1% was achieved for kesterite absorbers, using
a Cu2ZnSn(Se,S)4 thin-film solar cell made by hydrazine-based solution processing. Key device
characteristics were compiled, including light/dark JV, quantum efficiency, temperature
dependence of Voc and series resistance, photoluminescence, and capacitance spectroscopy,
providing important insight into how the devices compare with high-performance Cu(In,Ga)Se2.
The record kesterite device was shown to be primarily limited by interface recombination,
minority carrier lifetime, and series resistance. The new level of device performance points to the
42
significant promise of the kesterites as an emerging and commercially interesting thin-film
technology. Copyright (c) 2011 John Wiley & Sons, Ltd.
6 被引用次数: Citations: 81
题目: PRELIMINARY ESTIMATION OF RELEASE AMOUNTS OF I-131 AND CS-137
ACCIDENTALLY DISCHARGED FROM THE FUKUSHIMA DAIICHI NUCLEAR POWER
PLANT INTO THE ATMOSPHERE
作者: CHINO M; NAKAYAMA H; NAGAI H; TERADA H; KATATA G; YAMAZAWA H
出处:J NUCL SCI TECHNOL 48 (7): 1129-1134 JUL 2011
7 被引用次数: Citations: 72
题 目 : GUIDELINES AND RECOMMENDED TERMS FOR EXPRESSION OF
STABLE-ISOTOPE-RATIO AND GAS-RATIO MEASUREMENT RESULTS
作者: COPLEN TB
出处: RAPID COMMUN MASS SPECTROM 25 (17): 2538-2560 SEP 15 2011
摘要: To minimize confusion in the expression of measurement results of stable isotope and
gas-ratio measurements, recommendations based on publications of the Commission on Isotopic
Abundances and Atomic Weights of the International Union of Pure and Applied Chemistry
(IUPAC) are presented. Whenever feasible, entries are consistent with the Systeme International
d'Unites, the SI (known in English as the International System of Units), and the third edition of
the International Vocabulary of Basic and General Terms in Metrology (VIM, 3rd edition). The
recommendations presented herein are approved by the Commission on Isotopic Abundances and
Atomic Weights and are designed to clarify expression of quantities related to measurement of
isotope and gas ratios to ensure that quantity equations instead of numerical value equations are
used for quantity definitions. Examples of column headings consistent with quantity calculus (also
called the algebra of quantities) and examples of various deprecated usages connected with the
terms recommended are presented. Published in 2011 by John Wiley & Sons, Ltd.
8 被引用次数: Citations: 66
题 目 : SOLAR PHOTOVOLTAIC ELECTRICITY: CURRENT STATUS AND FUTURE
PROSPECTS
作者:
RAZYKOV TM; FEREKIDES CS; MOREL D; STEFANAKOS E; ULLAL HS;
UPADHYAYA HM
出处: SOLAR ENERG 85 (8): 1580-1608 Sp. Iss. SI AUG 2011
摘要: We review the technical progress made in the past several years in the area of mono-and
polycrystalline thin-film photovoltaic (PV) technologies based on Si, III-V, II-VI, and I-III-VI(2)
semiconductors, as well as nano-PV. PV electricity is one of the best options for sustainable future
energy requirements of the world. At present, the PV market is growing rapidly at an annual rate
of 35-40%, with PV production around 10.66 GW in 2009. Si and GaAs monocrystalline solar cell
efficiencies are very close to the theoretically predicted maximum values. Mono-and
polycrystalline wafer Si solar cells remain the predominant PV technology with module
production cost around $1.50 per peak watt. Thin-film PV was developed as a means of
substantially reducing the cost of solar cells. Remarkable progress has been achieved in this field
in recent years. CdTe and Cu(In,Ga)Se(2) thin-film solar cells demonstrated record efficiencies of
43
16.5% and almost 20%, respectively. These values are the highest achieved for thin-film solar
cells. Production cost of CdTe thin-film modules is presently around $0.76 per peak watt. (C)
2010 Elsevier Ltd. All rights reserved.
9 被引用次数: Citations: 63
题 目 : PROGRESS IN CHEMICAL-LOOPING COMBUSTION AND REFORMING
TECHNOLOGIES
作者:ADANEZ J; ABAD A; GARCIA-LABIANO F; GAYAN P; DE DIEGO LF
出处: PROG ENERG COMBUST SCI 38 (2): 215-282 APR 2012
摘要: This work is a comprehensive review of the Chemical-Looping Combustion (CLC) and
Chemical-Looping Reforming (CLR) processes reporting the main advances in these technologies
up to 2010. These processes are based on the transfer of the oxygen from air to the fuel by means
of a solid oxygen-carrier avoiding direct contact between fuel and air for different final purposes.
CLC has arisen during last years as a very promising combustion technology for power plants and
industrial applications with inherent CO2 capture which avoids the energetic penalty present in
other competing technologies. CLR uses the chemical looping cycles for H-2 production with
additional advantages if CO2 capture is also considered.
The review compiles the main milestones reached during last years in the development of these
technologies regarding the use of gaseous or solid fuels, the oxygen-carrier development, the
continuous operation experience, and modelling at several scales. Up to 2010, more than 700
different materials based on Ni, Cu, Fe, Mn, Co, as well as other mixed oxides and low cost
materials, have been compiled. Especial emphasis has been done in those oxygen-carriers tested
under continuous operation in Chemical-Looping prototypes. The total time of operational
experience ( approximate to 3500 h) in different CLC units in the size range 0.3-120 kW(th), has
allowed to demonstrate the technology and to gain in maturity. To help in the design, optimization,
and scale-up of the CLC process, modelling work is also reviewed. Different levels of modelling
have been accomplished, including fundamentals of the gas-solid reactions in the oxygen-carriers,
modelling of the air-and fuel-reactors, and integration of the CLC systems in the power plant.
Considering the great advances reached up to date in a very short period of time, it can be said that
CLC and CLR are very promising technologies within the framework of the CO2 capture options.
(C) 2011 Elsevier Ltd. All rights reserved.
10 被引用次数: Citations: 62
题目: LOWERING THE TEMPERATURE OF SOLID OXIDE FUEL CELLS
作者: WACHSMAN ED; LEE KT
出处: SCIENCE 334 (6058): 935-939 NOV 18 2011
摘要: Fuel cells are uniquely capable of overcoming combustion efficiency limitations (e. g., the
Carnot cycle). However, the linking of fuel cells (an energy conversion device) and hydrogen (an
energy carrier) has emphasized investment in proton-exchange membrane fuel cells as part of a
larger hydrogen economy and thus relegated fuel cells to a future technology. In contrast, solid
oxide fuel cells are capable of operating on conventional fuels (as well as hydrogen) today. The
main issue for solid oxide fuel cells is high operating temperature (about 800 degrees C) and the
resulting materials and cost limitations and operating complexities (e. g., thermal cycling). Recent
solid oxide fuel cells results have demonstrated extremely high power densities of about 2 watts
44
per square centimeter at 650 degrees C along with flexible fueling, thus enabling higher efficiency
within the current fuel infrastructure. Newly developed, high-conductivity electrolytes and
nanostructured electrode designs provide a path for further performance improvement at much
lower temperatures, down to similar to 350 degrees C, thus providing opportunity to transform the
way we convert and store energy.
11 被引用次数: Citations: 54
题目: HYDROGEN SENSORS - A REVIEW
作者:
HUBERT T; BOON-BRETT L; BLACK G; BANACH U
出处: SENSOR ACTUATOR B-CHEM 157 (2): 329-352 OCT 20 2011
摘要: Hydrogen sensors are of increasing importance in connection with the development and
expanded use of hydrogen gas as an energy carrier and as a chemical reactant. There are an
immense number of sensors reported in the literature for hydrogen detection and in this work these
sensors are classified into eight different operating principles. Characteristic performance
parameters of these sensor types, such as measuring range, sensitivity, selectivity and response
time are reviewed and the latest technology developments are reported. Testing and validation of
sensor performance are described in relation to standardisation and use in potentially explosive
atmospheres so as to identify the requirements on hydrogen sensors for practical applications. (C)
2011 Elsevier B.V. All rights reserved.
12 被引用次数: Citations: 53
题 目 : ENDF/B-VII.1 NUCLEAR DATA FOR SCIENCE AND TECHNOLOGY: CROSS
SECTIONS, COVARIANCES, FISSION PRODUCT YIELDS AND DECAY DATA
作者: CHADWICK MB; HERMAN M; OBLOZINSKY P; DUNN ME; DANON Y;
KAHLER AC; SMITH DL; PRITYCHENKO B; ARBANAS G; ARCILLA R; BREWER
R; BROWN DA; CAPOTE R; CARLSON AD; CHO YS; DERRIEN H; GUBER K;
HALE GM; HOBLIT S; HOLLOWAY S; JOHNSON TD; KAWANO T; KIEDROWSKI BC;
KIM H;
KUNIEDA S; LARSON NM;
LEAL L; LESTONE JP; LITTLE RC;
MCCUTCHAN EA; MACFARLANE RE; MACINNES M; MATTOON CM; MCKNIGHT RD;
MUGHABGHAB SF;
NOBRE GPA; PALMIOTTI G; PALUMBO A;
PIGNI MT;
PRONYAEV VG; SAYER RO; SONZOGNI AA; SUMMERS NC; TALOU P; THOMPSON
IJ; TRKOV A; VOGT RL; VAN DER MARCK SC; WALLNER A; WHITE MC; WIARDA
D; YOUNG PC
出处: NUCL DATA SHEETS 112 (12): 2887-2996 Sp. Iss. SI DEC 2011
摘要: The ENDF/B-VII.1 library is our latest recommended evaluated nuclear data file for use in
nuclear science and technology applications, and incorporates advances made in the five years
since the release of ENDF/B-VII.0. These advances focus on neutron cross sections, covariances,
fission product yields and decay data, and represent work by the US Cross Section Evaluation
Working Group (CSEWG) in nuclear data evaluation that utilizes developments in nuclear theory,
modeling, simulation, and experiment.
The principal advances in the new library are: (1) An increase in the breadth of neutron reaction
cross section coverage, extending from 393 nuclides to 423 nuclides; (2) Covariance uncertainty
data for 190 of the most important nuclides, as documented in companion papers in this edition; (3)
45
R-matrix analyses of neutron reactions on light nuclei, including isotopes of He; Li, and Be; (4)
Resonance parameter analyses at lower energies and statistical high energy reactions for isotopes
of Cl; K; Ti, V, Mn, Cr, Ni, Zr and W; (5) Modifications to thermal neutron reactions on fission
products (isotopes of Mo, Tc, Rh, Ag, Cs, Nd, Sm, Eu) and neutron absorber materials (Cd, Gd);
(6) Improved minor actinide evaluations for isotopes of U, Np, Pu, and Am (we are not making
changes to the major actinides U-235,U-238 and Pu-239 at this point, except for delayed neutron
data and covariances, and instead we intend to update them after a further period of research in
experiment and theory), and our adoption of JENDL-4.0 evaluations for isotopes of Cm, Bk, Cf,
Es; Fm; and some other minor actinides; (7) Fission energy release evaluations; (8) Fission
product yield advances for fission-spectrum neutrons and 14 MeV neutrons incident on Pu-239;
and (9) A new decay data sublibrary.
Integral validation testing of the ENDF/B-VII.1 library is provided for a variety of quantities: For
nuclear criticality, the VII.1 library maintains the generally-good performance seen for VII.0 for a
wide range of MCNP simulations of criticality benchmarks, with improved performance coming
from new structural material evaluations, especially for Ti, Mn, Cr, Zr and W. For Be we see some
improvements although the fast assembly data appear to be mutually inconsistent. Actinide cross
section updates are also assessed through comparisons of fission and capture reaction rate
measurements in critical assemblies and fast reactors, and improvements are evident.
Maxwellian-averaged capture cross sections at 30 keV are also provided for astrophysics
applications.
We describe the cross section evaluations that have been updated for ENDF/B-VII.1 and the
measured data and calculations that motivated the changes, and therefore this paper augments the
ENDF/B-VII.0 publication [H.
13 被引用次数: Citations: 51
题目: BIOETHANOL PRODUCTION FROM AGRICULTURAL WASTES: AN OVERVIEW
作者: SARKAR N; GHOSH SK; BANNERJEE S; AIKAT K
出处: RENEWABLE ENERGY 37 (1): 19-27 JAN 2012
摘要: Due to rapid growth in population and industrialization, worldwide ethanol demand is
increasing continuously. Conventional crops such as corn and sugarcane are unable to meet the
global demand of bioethanol production due to their primary value of food and feed. Therefore,
lignocellulosic substances such as agricultural wastes are attractive feedstocks for bioethanol
production. Agricultural wastes are cost effective, renewable and abundant. Bioethanol from
agricultural waste could be a promising technology though the process has several challenges and
limitations such as biomass transport and handling, and efficient pretreatment methods for total
delignification of lignocellulosics. Proper pretreatment methods can increase concentrations of
fermentable sugars after enzymatic saccharification, thereby improving the efficiency of the whole
process. Conversion of glucose as well as xylose to ethanol needs some new fermentation
technologies, to make the whole process cost effective. In this review, available technologies for
bioethanol production from agricultural wastes are discussed. (C) 2011 Elsevier Ltd. All rights
reserved.
14 被引用次数: Citations: 51
题目: INVITED REVIEW ARTICLE: SINGLE-PHOTON SOURCES AND DETECTORS
46
作者:
EISAMAN MD; FAN J; MIGDALL A; POLYAKOV SV
出处: REV SCI INSTR 82 (7): art. no.-071101 JUL 2011
摘 要 : We review the current status of single-photon-source and single-photon-detector
technologies operating at wavelengths from the ultraviolet to the infrared. We discuss applications
of these technologies to quantum communication, a field currently driving much of the
development of single-photon sources and detectors. (C) 2011 American Institute of Physics. [doi:
10.1063/1.3610677]
15 被引用次数: Citations: 47
题目: SULFUR-GRAPHENE COMPOSITE FOR RECHARGEABLE LITHIUM BATTERIES
作者:
WANG JZ; LU L; CHOUCAIR M; STRIDE JA; XU X; LIU HK
出处: J POWER SOURCES 196 (16): 7030-7034 Sp. Iss. SI AUG 15 2011
摘要: Sulfur-graphene (S-GNS) composites have been synthesized by heating a mixture of
graphene nanosheets and elemental sulfur. According to field emission electron microscopy,
scanning electron microscopy with energy dispersive X-ray mapping, Raman spectroscopy, and
thermogravimetric analysis, sulfur particles were uniformly coated onto the surface of the
graphene nanosheets. The electrochemical results show that the sulfur-graphene nanosheet
composite significantly improved the electrical conductivity, the capacity, and the cycle stability in
a lithium cell compared with the bare sulfur electrode. (C) 2010 Elsevier B.V. All rights reserved.
16 被引用次数: Citations: 45
题目: NON-NEGATIVE PATCH ALIGNMENT FRAMEWORK
作者:GUAN NY; TAO DC; LUO ZG; YUAN B
出处: IEEE TRANS NEURAL NETW LEARN 22 (8): 1218-1230 AUG 2011
摘要: In this paper, we present a non-negative patch alignment framework (NPAF) to unify
popular non-negative matrix factorization (NMF) related dimension reduction algorithms. It offers
a new viewpoint to better understand the common property of different NMF algorithms.
Although multiplicative update rule (MUR) can solve NPAF and is easy to implement, it
converges slowly. Thus, we propose a fast gradient descent (FGD) to overcome the
aforementioned problem. FGD uses the Newton method to search the optimal step size, and thus
converges faster than MUR. Experiments on synthetic and real-world datasets confirm the
efficiency of FGD compared with MUR for optimizing NPAF. Based on NPAF, we develop
non-negative discriminative locality alignment (NDLA). Experiments on face image and
handwritten datasets suggest the effectiveness of NDLA in classification tasks and its robustness
to image occlusions, compared with representative NMF-related dimension reduction algorithms.
17 被引用次数: Citations: 45
题目: ON A SYSTEM OF DIFFERENCE EQUATIONS
作者: STEVIC S
出处: APPL MATH COMPUT 218 (7): 3372-3378 DEC 1 2011
摘要: We show that the system of difference equations
x(n+1) = ax(n-1)/by(n)x(n-1) + c, y(n+1) = alpha y(n-1)/beta x(n)y(n-1) + gamma, n is an element
of N-0,
where the parameters a, b, c, alpha, beta, gamma and initial values x (1), x(0), y (1), y(0) are real
47
numbers, can be solved, considerably improving the results in the literature. (C) 2011 Elsevier Inc.
All rights reserved.
18 被引用次数: Citations: 42
题 目 : MANIFOLD REGULARIZED DISCRIMINATIVE NONNEGATIVE MATRIX
FACTORIZATION WITH FAST GRADIENT DESCENT
作者:
GUAN NY; TAO DC; LUO ZG; YUAN B
出处: IEEE TRANS IMAGE PROCESSING 20 (7): 2030-2048 JUL 2011
摘要: Nonnegative matrix factorization (NMF) has become a popular data-representation method
and has been widely used in image processing and pattern-recognition problems. This is because
the learned bases can be interpreted as a natural parts-based representation of data and this
interpretation is consistent with the psychological intuition of combining parts to form a whole.
For practical classification tasks, however, NMF ignores both the local geometry of data and the
discriminative information of different classes. In addition, existing research results show that the
learned basis is unnecessarily parts-based because there is neither explicit nor implicit constraint
to ensure the representation parts-based. In this paper, we introduce the manifold regularization
and the margin maximization to NMF and obtain the manifold regularized discriminative NMF
(MD-NMF) to overcome the aforementioned problems. The multiplicative update rule (MUR) can
be applied to optimizing MD-NMF, but it converges slowly. In this paper, we propose a fast
gradient descent (FGD) to optimize MD-NMF. FGD contains a Newton method that searches the
optimal step length, and thus, FGD converges much faster than MUR. In addition, FGD includes
MUR as a special case and can be applied to optimizing NMF and its variants. For a problem with
165 samples in R(1600), FGD converges in 28 s, while MUR requires 282 s. We also apply FGD
in a variant of MD-NMF and experimental results confirm its efficiency. Experimental results on
several face image datasets suggest the effectiveness of MD-NMF.
19 被引用次数: Citations: 41
题目: ELECTROCHEMICAL SENSORS BASED ON GRAPHENE MATERIALS
作者:
GAN T; HU SS
出处: MICROCHIM ACTA 175 (1-2): 1-19 OCT 2011
摘要: Single-layered graphene, emerging as a true two-dimensional nanomaterial, has tremendous
potential for electrochemical catalysis and biosensing as a novel electrode material. Considering
the excellent properties of graphene, such as large surface-to-volume ratio, high conductivity and
electron mobility at room temperature, low energy dynamics of electrons with atomic thickness,
robust mechanical and flexibility, we give a general view of recent advances in electrochemical
sensors based on graphene. We are highlighting here important applications of graphene and
graphene nanocomposites, and the assay strategies in electrochemical sensors for DNA, proteins,
neurotransmitters, phytohormones, pollutants, metal ions, gases, hydrogen peroxide, and in
medical, enzymatic and immunosensors.
20 被引用次数: Citations: 41
题 目 : WHOLE-ORGAN TISSUE ENGINEERING: DECELLULARIZATION
RECELLULARIZATION OF THREE-DIMENSIONAL MATRIX SCAFFOLDS
作者: BADYLAK SF; TAYLOR D; UYGUN K
48
AND
出处: ANNU REV BIOMED ENG 13: 27-53 2011
摘要: The definitive treatment for end-stage organ failure is orthotopic transplantation. However,
the demand for transplantation far exceeds the number of available donor organs. A promising
tissue-engineering/regenerative-medicine approach for functional organ replacement has emerged
in recent years. Decellularization of donor organs such as heart, liver, and lung can provide an
acellular, naturally occurring three-dimensional biologic scaffold material that can then be seeded
with selected cell populations. Preliminary studies in animal models have provided encouraging
results for the proof of concept. However, significant challenges for three-dimensional organ
engineering approach remain. This manuscript describes the fundamental concepts of whole-organ
engineering, including characterization of the extracellular matrix as a scaffold, methods for
decellularization of vascular organs, potential cells to reseed such a scaffold, techniques for the
recellularization process and important aspects regarding bioreactor design to support this
approach. Critical challenges and future directions are also discussed.
承
办：西北工业大学图书馆信息咨询与情报研究部
审
稿：刘秋让
电 话：（029）88492928
编
辑：燕 辉 罗星华
E-mail: shiny@nwpu.edu.cn
责任编辑：师俏梅
49