SPECIFICATIONS FOR 2008 FORD F-550 CHASSIS WITH SERVICE BODY
AND EQUIPMENT OR EQUAL
_COMPLY_
4x4 SD Regular Cab 165” WB DRW XL (F57)
YES / NO
____ /____
Powertrain
Powerstroke 6.4L V-8 OHV direct diesel injection 32 valve twin turbo diesel engine *
200 amp HD alternator * 750 amp (total) 78 amp hours (Ah) (total) battery dual
batteries * Engine block heater, transmission oil cooler * 5-speed electronic automatic
transmission with overdrive, lock-up, driver selection * Part-time four-wheel drive
with manual transfer case shift, manual locking hubs * Limited slip differential * 4.88
axle ratio * Stainless steel exhaust
____ /____
Steering and Suspension
Hydraulic power assist re-circulating ball steering * 4-wheel disc brakes with front and
rear vented discs * Firm ride suspension * Mono-beam non-independent front
suspension * Front anti-roll bar * Front coil springs * HD front shocks * Rigid rear
axle * Rear leaf suspension * Rear anti-roll bar * HD rear leaf springs * HD rear
shocks * Front and rear 19.5” x 6.00” argent steel wheels * LT225/70SR19.5 BSW AT
front and rear tires * Outside rear mounted full-size steel spare wheel
____ /____
Safety
4-wheel anti-lock braking system * Dual airbags, passenger side front-impact
cancellable airbag * Front height adjustable seatbelts
____ /____
Comfort and Convenience
Air conditioning * AM/FM stereo, clock, seek-scan, 2 speakers, fixed antenna * 2 12V
DC power outlets, ashtray, front lighter element(s) location * Analog instrumentation
display includes tachometer, oil pressure gauge, engine temperature gauge,
turbo/supercharger boost gauge, transmission fluid temp gauge, engine hour meter, trip
odometer * Warning indicators include oil pressure, engine temperature, battery, key in
ignition, low fuel, door ajar * Day-night rearview mirror * Interior lights include dome
light with delay, front reading lights * Glove box, front cup-holder, instrument panel
bin, dashboard storage
____ /____
Seating and Interior
Seating capacity of 3 * Bench front seat with fixed head restraints, center armrest * 4way adjustable driver seat * 4-way adjustable passenger seat * Vinyl faced front seats
with vinyl back material * Full cloth headliner, full vinyl/rubber floor covering,
plastic/rubber gear shift knob, cab back insulator, chrome interior accents
____ /____
Exterior Features
Side impact bars, front license plate bracket, fully galvanized steel body material, side
steps * Black fender flares * Black side window moldings, black front windshield
molding, black rear window molding * Black door handles * Black grille * 2 doors *
Trailer harness, brake controller * Driver and passenger manual black folding outside
mirrors * Front black bumper with front black rub strip/fascia accent, front tow hooks *
Sealed beam halogen headlamps * Additional exterior lights include cab clearance
lights * Clearcoat monotone paint
____ /____
1B
MTB#07-26
Warranty
Basic .................................... 36 month/36,000 miles Powertrain................. 60 month/60,000 miles
Corrosion Perforation ..60 month/unlimited mileage Roadside Assistance . 60 month/60,000 miles
Diesel Engine .................... 60 month/100,000 miles
3/7/2016
COMPLY
YES / NO
Dimensions and Capacities
____ /____
Output ................ 325 hp @ 3,000 rpm
1st gear ratio ............................... 3.110
3rd gear ratio ............................... 1.550
5th gear ratio ............................... 0.710
Curb weight ........................ 7,299 lbs.
Front GAWR ...................... 7,000 lbs.
Front curb weight ................ 4,200 lbs.
Front axle capacity .............. 7,000 lbs.
Front spring rating ............... 7000 lbs.
Maximum GCWR ............. 26,000 lbs.
Front legroom ............................ 41.0”
Front hiproom ............................ 67.6”
Passenger area volume .......66.8 cu. ft.
Body width ................................ 93.6”
Wheelbase ................................ 165.0”
Axle to end of frame .................. 47.6”
Rear tread ................................... 93.6”
Fuel tank ............................... 40.0 gal.
Torque ............................ 600 lb.-ft. @ 2,000 rpm
2nd gear ratio ................................................ 2,220
4th gear ratio................................................. 1,000
Reverse gear ratio ........................................ 2,880
GVWR................................................ 19,000 lbs.
Payload ............................................... 11,010 lbs.
Rear curb weight .................................. 3,099 lbs.
Rear axle capacity ............................. 13,660 lbs.
Towing capacity ................................. 16,000 lbs.
5th-wheel towing capacity ................... 17,600 lbs.
Front headroom ........................................... 41.4”
Front shoulder room .................................... 68.0”
Length ....................................................... 250.0”
Height .......................................................... 79.5”
Cab to axle................................................... 84.0”
Front tread ................................................... 74.8”
Turning radius .............................................. 24.3’
4x4 SD Regular Cab 165” WB DRW XL (F57)
Engine: 6.4L OHV Power Stroke Diesel V8
Transmission: TorqShift 5-Speed Auto w/OD (Diesel)
Rear Axle Ratio: Limited Slip w/4.88
GVWR: 19,000 lbs.
____ /____
____ /____
Packages
Order Code 660A
(99Y) Engine: 6.8L 3-valve SOHC EFI Triton V10; (44T) Transmission:5Speed TorqShift Automatic w/OD: Includes tow/haul mode; (X48) 4.88 Axle
Ratio; (STDGV) GVWR: 17,950 lb. Payload Package #1; (TFB) Tires:
T225/70Rx19.5G BSW AS; (64Z) Wheels: 19.5” Argent Painted Steel
(6);(A) HD Vinyl Full Bench Seat w/Recline: Includes integrated armrest
and Cupholders located in armrest; (587) Radio: AM/FM Stereo w/Digital
Clock: Includes 2-speakers; Upfitter Switches (4)
Powertrain
Engine: 6.4L OHV Power Stroke Diesel V8
135 Amp Heavy Duty Alternator; Dual 78 AH Batteries. Torque: 600 ft. lbs.
@ 2000 rpm
Transmission: TorqShift 5-Speed Auto w/OD (Diesel)
Includes tow/haul mode.
Limited Slip w/4.88 Axle Ratio
GVWR: 19,000 lbs.
2B
MTB#07-26
3/7/2016
COMPLY
YES / NO
Wheels & Tires
Tires: LT225/70Rx19.5G BSW Max Traction
Includes 4 traction tires on the rear and 2 traction tires on the
front.
____ /____
(2) SPARE MAX TRACTION TIRES MOUNTED ON (2) RIMS
Wheels: 19.5” Argent Painted Steel (8)
(61J) 6-Ton Hydraulic Jack. Excludes carrier. Required in Rhode
Island.
____ /____
Seats & Seat Trim
A
HD Vinyl Full Bench Seat w/Recline
Includes integrated armrest and cupholders located in armrest.
____ /____
Other Options
PAINT
Monotone Paint Application
165” Wheelbase/84” Cab to Axle
6-Ton Hydraulic Jack
Extra Heavy Duty 200-Amp Alternator
Engine Block Heater
Standard in Alaska, Colorado, Idaho, Maine, Minnesota, Montana,
North Dakota, South Dakota, Wisconsin and Wyoming.
TowCommand Integrated Trailer Brake Controller
Trailer brake controller verified to be compatible with electronicactuated brakes only.
Black Molded Cab Steps
Manual Air Conditioning
Radio: AM/FM Stereo w/Digital Clock
Includes 2 speakers
Payload Upgrade Package
(NONGV) GVWR: 19,000 lbs. Includes upgraded frame. See
Order Guide Supplemental reference for further details on GVWR.
Snow Plow Prep Package
(67D) Extra Heavy Duty 200-Amp Alternator. Includes unique fan
clutch and pre-selected springs (See Order Guide Supplemental
Reference for springs/FGAWR of specific vehicle configurations).
Restrictions apply; see Supplemental Reference or Body Builders
Layout Book for details. Also allows for the attachment of a winch.
3B
MTB#07-26
3/7/2016
COMPLY
YES / NO
____ /____
TowCommand System
(52B) TowCommand Integrated Trailer Brake Controller: Trailer
brake controller verified to be compatible with electronic-actuated
brakes only. Includes trailer tow mirrors and trailer wiring – 7wire harness with relays, blunt out and labeled. NOTE: Integrated
Trailer Brake Controller (52B) has only been verified to be
compatible with trailers having electric-actuated drum brakes (1 to
4 axles) and not hydraulic surge or electric-over-hydraulic types.
Ambulance Prep Package Not Included
____ /____
____ /____
Interior Colors For: Primary w/XL
Medium Stone
Primary Colors For: Primary w/XL
Forest Green Clearcoat Metallic
TWO WAY RADIO
MOTOROLA CDM 1250 WITH TRA 4506 BLACK ANTENNA OR EQUAL
SPECIFICATIONS
MODEL 132D54V OMAHA STANDARD DUAL WHEEL UTILITY BODY OR EQUAL
NOTE: ALL DIMENSIONS ARE MINIMUM
1) DIMENSIONS:
A. LENGTH: 132”
B. WIDTH: 95-3/4”
C. HEIGHT: 40”
D. COMPARTMENT DEPTH: 20”
E. LOAD SPACE: 132” X 54-1/2”
F. CAB TO AXLE: 84”
G. CURBSIDE COMPARTMENTS:
1) FRONT 33 X 60 X 20
2) INTERMEDIATE 24 X 40 X 20
3) HORIZONTAL 46 X 19 X 20
4) REAR 29 X 40 X 20
H. STREETSIDE COMPARTMENTS:
1) FRONT 33 X 40 X 20
2) INTERMEDIATE 24 X 40 X 20
3) HORIZONTAL 46 X 19 X 20
4) REAR 29 X 40 X 20
MAKE: _____________ MODEL:
COMPLY: ______ EXCEPTIONS:
4B
MTB#07-26
3/7/2016
2) UNDER STRUCTURE:
A. FRONT AND REAR CROSS MEMBERS-7 GA. FORMED STEEL CHANNEL.
ADDITIONAL REINFORCEMENT IS INCORPORATED IN THE FRONT CROSS
MEMBER AT THE UNIVERSAL MOUNTING POINTS TO THE CHASSIS FRAME.
B. INTERMEDIATE CROSS MEMBERS-7 GA. FORMED STEEL CHANNEL WITH
TWO EXTENSIONS WHICH REST ON THE TRUCK FRAME RAILS.
C. LONGITUDINAL STIFFENERS- FOUR (4) FULL LENGTH 14 GA. FORMED
STEEL CHANNEL LONGITUDINAL MEMBERS, INTERLACED WITH CROSS
MEMBERS.
D. FLOOR- 1/8” SAFETY TREADPLATE STEEL.
COMPLY: ______ EXCEPTIONS:
3) COMPARTMENT CONSTRUCTION: ALL A-40 TWO SIDED GALVANNEALED STEEL
A. FRONT AND REAR END PANWELS – 14 GA. GALVANNEALED STEEL.
B. BOTTOM PANELS – 14 GA. GALVANNEALED STEEL.
C. TOP PANEL - 14 GA. GALVANNEALED STEEL.
D. INTERMEDIATE PANELS –14 GA. GALVANNEALED STEEL.
E. FENDER PANEL – 14 GA. GALVANNEALED STEEL WITH DIE FORMED WHEEL
ARCH SECTION.
F. RUBRAIL - 14 GA. GALVANNEALED STEEL. OUTSIDE EDGE OF RUBRAIL HAS
3/8” HEM FOR ADDITIONAL STRENGTH.
COMPLY: ______ EXCEPTIONS:
4) DOOR CONSTRUCTION:
A. DOUBLE PANEL CONSTRUCTION OF 20 GA. GALVANNEALED STEEL WITH
AN INTERIOR STEEL “C” CHANNEL STIFFENER BONDED BETWEEN THE
INNER AND OUTER PANELS OF THE SERVICE BODY DOORS WITH
STRUCTURAL ADHESIVE.
NOTE: NO EXCEPTIONS
B. LATCHES – ALL STAINLESS STEEL T-HANDLE TWIST TYPE TAMPER PROOF
LOCKS; FULLY WEATHER PROOF SEALED STAINLESS STEEL HOUSING,
BOLTED TO DOOR FOR EASE OF REPLACEMENT. ALL DOORS TO BE KEYED
ALIKE.
C. STRIKER PIN – STAINLESS STEEL PIN, ADJUSTABLE AND LOCATED INSIDE
THE PRIMARY SEAL. MOUNTED ON 10 GA. ADJUSTABLE SLOTTED
BRACKET.
D. HINGE – FULL LENGTH ALL STAINLESS STEEL HINGE WITH CONCEALED
HINGE LEAVES AND ¼” STAINLESS STEEL ROD. BOLTED TO DOOR FRAME
FOR SECURITY AND EASE FO REPLACEMENT.
E. DOOR SEAL – FULL PERIMETER AUTOMOTIVE NEOPRENE BULB SEAL WITH
3M ADHESIVE BACKING. SEAL HAS CONTINUOUS CONTACT WITH DOOR.
F. DOOR HOLDER – HEAVY DUTY CABLE. STANDARD ON HORIZONTAL
COMPARTMENTS, ALL VERTICAL COMPARTMENTS TO HAVE SPRING
LOADED TWO WAY ADJUSTABLE DOOR STAY.
COMPLY: ______ EXCEPTIONS:
5B
MTB#07-26
3/7/2016
5) COMPARTMENTS TRAYS & SHELVES:
A. STREETSIDE FRONT COMPARTMENT HAS SET OF FIVE NESTED SLIDE OUT
TRAYS. EACH TRAY IS 17” DEEP X 38” WIDE X 3” HIGH WITH DIVIDERSA.
TRAYS ARE 150 LB CAPACITY AND HAVE AUTOMATIC LOCK-IN LATCH
SYSTEM.
B. ONE (1) HORIZONTAL COMPARTMENT DIVIDER TRAY. TRAY IS 16 GA.
GALVANIZED STEEL, 2” LIP FRONT AND REAR WITH DIVIDER SLOTS ON 2”
CENTERS. HORIZONTAL COMPARTMENT TRAY IS ADJUSTABLE VIA CLIPS
VARIABLE ON 4” CENTERS.
C. TWO (2) REAR COMPARTMENT SHELVES. SHELVES ARE 16 GA.
GALVANIZED STEEL, 1” LIP ON ONE SIDE WITH LIP FLANGED OPPOSITE ON
OTHER SIDE SO SHELF CAN BE INSTALLED WITH FRONT LIP EITHER UP OR
DOWN. REAR VERTICAL COMPARTMENT SHELVES ARE ADJUSTABLE VIA
CLIPS VARIABLE ON 4” CENTERS.
COMPLY: ______ EXCEPTIONS:
6) FRONT BULKHEAD:
14 GA. GALVANNEALED STEEL. FORMED TOP RAIL WITH TWO DIE FORMED
REINFORCEMENT RIBS. FLOOR DRAINAGE IS DESIGNED INTO LOWER RIB AT
FLOOR LEVEL.
COMPLY: ______ EXCEPTIONS:
7) PAINT:
A. THE ENTIRE UNDERSIDE AND DOOR INTERIORS ARE TO BE COVERED WITH
AUTOMOTIVE TYPE UNDERCOATING.
B. ALL PRODUCT GOES THROUGH A MULTI-STAGE IMMERSION CLEANING AND
RINSING PROCESS TO THOROUGHLY CLEAN ALL SURFACES. THE BODY IS
THEN IMMERSED IN A CHEMICAL BATH TO PREP THE STEEL FOR OPTIMUM
ZINC PHOSPHATE ADHESION PRIOR TO IMMERSION IN THE ZINC PHOSPHATE
TANK. THE ZINC PHOSPHATE STAGE PUTS A BASE ZINC CRYSTALLINE
STRUCTURE ON THE STEEL FOR SUPERIOR PAINT ADHESION. A SUBSEQUENT
SEALER RINSE TANK SEALS THE PRETREATED SURFACE TO OPTIMIZE
CORROSION RESISTANCE. TWO REVERSE OSMOSIS RINSE TANKS INSURE
THAT THE PRODUCT IS FREE FROMO MINERAL DEPOSITS PRIOR TO PAINTING.
THE BODY IS THEN IMMERSED IN AN EPOXY ELECTRO-DEPOSITION TANK
WHERE THE GRAY EPOXY PRIME PAINT IS CHARGED ONTO THE BODY.L
AFTER TWO FINAL PERMEATE RINSE TANKS REMOVE ANY EXCESS EPOXY
MATERIAL AND INSURE A CONSISTENT SURFACE FINISH, THE BODY IS OVEN
CURED AT 350 DEGREES FOR 40 MINUTES TO FULLY CROSSLINK AND CURE
THE ELECTROCOAT PRIMER PROVIDING AN EXTREMELY DURABLE AND RUST
RESISTANT FINISH.
C. EXTERIOR OF BODY – SHERWIN WILLIAMS ACRYLIC ENAMEL GREEN TO
MATCH CAB OR EQUAL.
COMPLY: ______ EXCEPTIONS:
6B
MTB#07-26
3/7/2016
8) LIGHTING:
A. TO MEET ALL FMVSS 108 STANDARDS
B. RECESSED STOP, TAIL, BACKUP LIGHTS (ALL LIGHTS TO BE LED)
C. COMPLETE WIRING HARNESS WITH CHASSIS COONNECTOR
D. LICENSE PLATE BRACKET WITH LIGHT’
E. ELECTRIC BRAKE CONTROL WITH COLE HERSEE 12063 TRAILER LIGHT PLUG
F. RECEIVER TUBE WITH 8 TON COMBO HITCH WITH 2” BALL AND “D” RINGS
G. TWO (2) KWIK-RAZE TELESCOPING WORK LIGHTS THAT CAN BE MOVED UP
AND DOWN AND SWIVEL 360 DEGREES, TOP-RAISING 48” TELESCOPING
ANODIZED ALUMINUM POLE WITH 320 GRIT SPIRAL BRIGHT-DIPPED FINISH,
MOUNTING BRACKET, 2” BASE WITH LOCKING KNOB WITH WALLED 1” OD
TELSCOPING POLE. LIGHT ON POLE ONE 7” ROUND COLLINS MODEL FX-9
LIGHT 500,000 CANDLE POWERSPOT/FLOOD, 500,000 PEAK CANDLE POWER IN
SPOT MODE, 50,000 CANDLE POWER IN FLOOD MODE MOUNTED FRONT OF
SERVICE BODY, ONE EACH SIDE WITH SWITCH IN CAB.
COMPLY: ______ EXCEPTIONS:
9) BUMPER:
A. GS96 GRIP STRUT BUMPER – 12 GA A-40 GALVANNEALED STEEL RECESSED IN
CENTER. NOTE: MILD STEEL TREADPLATE BUMPER IS NOT ACCEPTABLE
COMPLY: ______ EXCEPTIONS:
9) ADDITIONAL EQUIPMENT:
A. MASTER LOCKING OF ALL COMPONENTS WITH INTERNAL LOCK SYSTEM
FROM REAR.
B. VENT IN RIGHT FRONT COMPARTMENT.
C. CURBSIDE REAR COMPARTMENT TO HAVE CRANE REINFORCEMENT PACKAGE
INSTALLED FOR 4,000 LB. CAPACITY CRANE.
D. ADDITIONAL LEAF SPRING ON RIGHT SIDE REAR.
E. BACK UP ALARM – ECCO 510 OR APPROVED EQUAL.
F. TWO (2) LED STROBE LIGHTS WITH RUBBER GROMMETS TO BE MOUNTED IN
REAR BODY PANEL, (ONE ON EACH SIDE OF TRUCK). ALL LIGHTS TO BE
WIRED TO LIGHTED SWITCH IN CAB.
G. ALUMINUM DIAMOND PLATE ROCK GUARDS FOR FRONT.
H. 12 GUAGE STEEL TREADPLATE ON COMPARTMENT BACKS AND ON THE INSIDE
OF THE TAILGATE IN THE COMPARTMENT AREA.
I. LIGHTS IN ALL COMPARTMENTS OF SERVICE BODY WITH TELLTALE SWITCH
IN CAB.
J. WILTON COMBINATION BENCH VISE INSTALLED ON REAR BUMPER IN
REINFORCED RECEIVER TUBE.
K. WHELEN LIBERTY LED WITH PERMANENT ROOF MOUNTED LIGHTBAR.
AMBER FRONT WITH SWITCH, AMBER REAR WITH SWITCH, FRONT TAKE
DOWN LIGHTS WITH SWITCH, ALLEY LIGHTS WITH SWITCH EACH SIDE. SIX (6)
LED TRAFFIC ADVISOR. SIX (6) CONTROL BOX MOUNTED IN CAB. FOUR (4)
ADDITIONAL LINEAR FRONT LEDS.
7B
MTB#07-26
3/7/2016
L. INGERSOL RAND MODEL 24750F13GH WITH 100% CAST IRON DESIGN OR
EQUAL. 175 PSI TWO STAGE TYPE-30 13.5 HP FINNED COPPER INTERCOOLED
WITH REMOVABLE CYLINDERS FOR SIMPLE MAINTENANCE, SPLASH
LUBRICATION DESIGN CORROSIVE RESISTANT POWDER COAT PAINT FINISH,
30 GAL ASME TANK WITH MANUAL DRAIN, WITH 13.5 HP HONDA ENGINE WITH
FUEL EFFICIENT IDLE ENGINE CONTROL AND ELECTRONIC IGNITION WITH
ELECTRIC START HOOKED UP TO TRUCK BATTERY. TO INCLUDE 50 FT. OF AIR
LINE AND HOSE REEL MOUNTED OVER WELDING UNIT IN LOAD SPACE.
M. MILLER BOB CAT 225 WELDER ON A 22 HP GASOLINE ENGINE OR EQUAL. 12
GALLON SMART FUEL TANK. ENCLOSED ENGINE AND SWITCHES. IRON AND
COPPER ALTERNATOR/GENERATOR. HIGH IMPACT PROTECTIVE ARMOUR
WITH RECEPTACLE AND OUTPUT STUD COVERS. METER MAINTENANCE
DISPLAYS WITH HOUR METER FUNCTION AND OIL CHANGE INTERVAL. TWO
(2) AWG 1 X 50 FT. CABLE. TWO (2) LUGS, ONE (1) TWECO 250 AMP ELECTRODE
HOLDER, ONE (1) 300 AMP GROUND CLAMP MOUNTED IN SERVICE BODY LOAD
SPACE. WELDER IS TO BE PROTECTED BY A REMOVABLE STEEL TUBE GUARD
24”, AND MOUNTED IN THE LOAD AREA.
N. CUSTOM FABRICATED TRANSFER TANK 52”L X 28”H X 12”W WITH FILL-RITE
MODEL1210B 12 VOLT 14 GPM PUMP, 50 FT. OF HOSE WITH NOZZLE.
O. MOTOROLA CDM TWO WAY RADIO WITH TRA4506 BLACK ANTENNA OR
EQUAL MOUNTED IN CAB. LOCATION TO BE DETERMINED BY USING AGENCY
P. WARRANTY: 6 YEARS ON RUST THRU PROTECTION, HINGES AND LOCKS.
COMPLY: ______ EXCEPTIONS:
VENDOR TO ANSWER ALL COMPLIANCE QUESTIONS, LIST ALL EXCEPTIONS IN
DETAIL, AND RETURN WITH THE BID.
8B
MTB#07-26
3/7/2016
COMPLY
YES / NO
SPECIFICATIONS FOR CRANE
____ /____
LIFTMOORE CRANE MODEL 4000X-16 OR EQUAL MOUNTED ON
COMPARTMENT TOP AT RIGHT SIDE REAR OF SERVICE BODY.
____ /____
POWER HOIST, POWER BOOM ELEVATION, POWER ROTATION AND
POWER BOOM EXTENSION FROM 8 FT. TO 12 FT., WITH A MANUAL
PULL OUT TO 16 FT.
____ /____
CAPACITY: 16,000 FT. – LB. WITH CAPACITIES AS FOLLOWS:
4,000 LBS @ 4 FT.
2,666 LBS @ 6 FT.
2,000 LBS @ 8 FT.
1,600 LBS @ 10 FT.
1,333 LBS @ 12 FT.
1,142 LBS @ 14 FT.
1,000 LBS @ 16 FT.
____ /____
____ /____
HOIST WINCH:
THE HOIST WINCH HAS A PLANETARY GEAR DRIVE FOR BEST
POSSIBLE EFFICIENCY. A 1.8 HP PERMANENT MAGNETIC MOTOR
POWERS THE WINCH. THE SINGLE LINE CAPACITY OF THE WINCH IS
1,600 LBS. THE WINCH LOAD IS CONTROLLED BY A DYNAMIC
BRAKING SYSTEM ON THE MOTOR AND BY A LOAD APPORTIONED
MECHANICAL BRAKE LOCATED IN THE WINCH DRUM. RATIO
BETWEEN WINCH DRUM AND WIRE ROPE MEETS ANSI
REQUIREMENTS. WINCH PERFORMANCE IS AS FOLLOWS:
LOAD (LBS)
HOOK SPEED
(FT/MIN)
AMP DRAW
1000
14.5
75
2000
7.2
80
4000
4.5
95
WIRE ROPE AND SHEAVES:
THE CRANE IS TO BE SUPPLIED WITH 85 FT. OF ¼ IN. GALVANIZED
AIR CRAFT CABLE. THE MINIMUM BREAKING STRENGTH OF THE
ROPE IS 7000 LBS. THE WIRE ROPE IS TO BE LOCATED OUTSIDE OF
THE BOOM AND VISIBLE FOR OPERATORS CONTINUAL INSPECTION.
A TRAVELING BLOCK FOR EAST TWO AND THREE PART HOOK UP IS
INCLUDED. ALL SHEAVES ARE TO MEET ANSI REQUIREMENTS.
____ /____
____ /____
HYDRAULIC SYSTEM:
THE HYDRAULIC PUMP IS DRIVEN BY A 12 VOLT DC SERIES WOUND
ELECTRIC MOTOR. A GEAR TYPE PUMP WITH 1.2 GPM CAPACITY AT
500 PSI. HYDRAULIC FUNCTIONS ARE CONTROLLED THRU FOUR
WAY SPRING CENTERED SOLENOID ACTIVATED VALVES. THE
VALVES ACTUATE AT A MINIMUM OF 10 VOLTS, HAVE MANUAL
OVER-RIDE CAPABILITIES AND ARE MOUNTED ON A MANIFOLD FOR
EASY ACCESS. THE RESEVOIR CAPACITY IS 1 GALLON. THE RELIEF
VALVE ON THE PUMP IS SET FOR 1800 PSI.
ROTATION SYSTEM:
9B
MTB#07-26
3/7/2016
COMPLY
YES / NO
____ /____
____ /____
THE HYDRAULIC POWERED ROTATION IS DRIVEN BY A LOW SPEED,
HIGH TORQUE HYDRAULIC MOTOR AND DRIVES THRU A 54:1 RATIO
SELF LOCKING WORM GEAR . THE WORM GEAR IS AN ALUMINUM
BRONZE ALLOY. THE WORM IS HARDENED STEEL. THE CRANE
ROTATES 360 DEGREES CONTINUOUSLY WITHOUT LIMIT IN TWO 4.00
IN. TAPERED ROLLER BEARINGS.
____ /____
BOOM ELEVATION:
THE BOOM IS CAPABLE OF MOVING FROM -5 DEGREES TO +75
DEGREES. IT IS ELVATED BY A 3.5 IN. BORE DOUBLE ACTING
CYLINDER. THE CYLINDER HAS AN INTEGRAL COUNTERBALANCE
VALVE WITH RELIEF SET AT 2000 PSI. THE COUNTERBALANCE
VALVE HAS TWO VITAL PURPOSES. IT WILL HOLD THE CYLINDER IN
THE EVENT OF HOSE FAILURE, AND IT CONTROLS THE RATE OF
BOOM DECENT.
____ /____
BOOM EXTENSION:
THE BOOM EXTENDS UNDER POWER FROM 8 FT. TO 12 FT. TO 16 FT.
BY A 2.5 IN. BORE HYDRAULIC CYLINDER. THE CYLINDER IS
MOUNTED INSIDE THE BOOM FOR PROTECTION. THE CYLINDER HAS
A COUNTERBALANCE VALVE INTEGRALLY MOUNTED WITH RELIEF
SET AT 2000 PSI. THE COUNTERBALANCE WILL HOLD THE CYLINDER
IN THE EVENT OF HOSE FAILURE, AND CONTROLS THE RATE OF
CYLINDER RETRACTION. THE BOOM HAS A MANUAL TELESCOPING
SECTION THAT CAN BE EXTENDED FROM 12 FT. TO 16 FT. WITH ONE
INTERMEDIATE POSITION AT 14 FT. THE POWER EXTENDABLE
SECTION MOVES ON NYLATRON SLIDE PADS.
____ /____
LOAD SENSOR:
A LOAD LIMITING SENSOR IS INSTALLED IN THE ELEVATION
CYLINDER. THIS SENSOR WILL SHUT DOWN, HOIST UP, BOOM OUT,
AND BOOM DOWN WHEN AN OVERLOAD IS DETECTED. THE SENSOR
WILL RESET AFTER THE LOAD IS LOWERED.
____ /____
ANTI TWO-BLOCK:
AN ANTI TWO-BLOCK SYSTEM IS TO BE INCLUDED WITH THE CRANE.
THE ANTI TWO-BLOCK IS TO PREVENT THE BOOM AGAINST THE
TRAVELING BLOCK AND BREAKING THE CABLE.
____ /____
PENDANT CONTROL:
A 20 FT. REMOTE PENDANT CONTROL IS TO BE SUPPLIED WITH THE
CRANE. FOR SAFEST POSSIBLE USE, THE PENDANT CONTROL OS
REMOVABLE, AND EACH FUNCTION IS CONTROLLED BY A
MOMENTARY CONTACT TOGGLE SWITCH.
OUTRIGGERS:
THE CRANE IS TO BE EQUIPPED WITH A MANUAL OUTRIGGER
ASSEMBLY.
EXCEPTIONS: _________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
10B
MTB#07-26
3/7/2016
______________________________________________________________________________
11B
MTB#07-26
3/7/2016