28/10/2013
28/10/201328/10/2013Askıya Alma ve Kota Listeleri*
1-7-2014 Dönemi
*Aşağıdaki listelerde yer alan askıya alma ve kota talepleri müzakere aşamasındadır. Bu itibarla, söz konusu listeler nihai durumu temsil etmemektedir.
Askıya Alma Talepleri
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
2707 99 99
3090844/2013
Petroleum Oils whose aromatic content New
exceeds their non-aromatic content for
use as Refinery feedstock to undergo
one of the specific processes described
in Note 5 to Chapter 27
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: As a
Refinery feedstock component. >> any trade name for it: Main
components affected are Atmospheric Residue and Vacuum Gas
Oil although any other Refinery feedstock containing more
aromatics than non-aromatics are also affected. >> the
manufacturing process being used Refinery processing - Note 5
to Chapter 27 of the Tariff. >> what the finished product is
Finished and semi-finished products of Chapter 27 of the Tariff
2707 99 99
3082494/2013
Heavy oils obtained from the distillation New
of petroleum crude oil, provided that
less than 65 % by volume distils at up to
250 °C by the EN ISO 3405 method and
the weight of the aromatic constituents
exceeds that of the non-aromatic
constituents, used as a feedstock for
production of fuels and fuel components
by
“specific
process”:
vacuum
distillation, cracking, hydrotreatment or
alkylation processes
BG
Applicant
ROUND 2014-07-01 >> Intended use: As feedstock for production
of fuels and fuel components by “specific process”: vacuum
distillation, cracking, hydrotreatment or alkylation. >> The
products which will be produced from this feedstock: automotive
gasoline, diesel fuel, heavy fuel oil, sulphur, bitumen and semifinished products.
2710 19 99
3016685/2013
Catalytically
hydroisomerized
and New
dewaxed
base
oil
comprising
hydrogenated,
highly
isoparaffinic
hydrocarbons, containing by weight:
— 90 % or more of saturates,
— not more than 0,03 % of sulphur
with a viscosity index of 120 or more
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used These
products are to be used as the main blending components in the
manufacturing of premium lubricants. As a general rule, one litre
of lubricants is composed of anywhere between 70% and 90%
base oil, the rest being made up of additives. >> the
manufacturing
process
being
used
Hydroisomerisation
technology. >> the manufacturing process being used This is a
high-temperature, high-pressure process in which a catalyst
selectively converts the wax molecules (isomerized) into very high
quality base oil. The process removes wax and thus lowers the
pour point of the base oil, resulting in higher Viscosity Indexes
and better yields. >> relevant chemical or physical characteristics
The chemical name of the substance is also lubricating oils
1 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
(petroleum), C20-C50, and hydrotreated neutral oil-based.
Relevant characteristics are viscosity, viscosity index, pour point,
flash point, colour, Noack, Volatility, and density. (Please see
relevant data sheets). >> what the finished product is Premium
lubricating oils
2710 19 99
3041249/2013
Catalytically
hydroisomerized
and New
dewaxed
base
oil
comprising
hydrogenated,
highly
isoparaffinic
hydrocarbons, containing greater than
or equal to 90 mass percent saturates
and less than or equal to 0,03 mass
percent sulphur and having a viscosity
index of greater than or equal to 120
FI
Applicant
ROUND 2014-07-01 >> How the component is to be used: These
products are to be used as the main blending components in the
manufacturing of premium lubricants. As a general rule, one litre
of lubricants is composed of anywhere between 70% and 90%
base oil, the rest being made up of additives.
>> The
manufacturing process being used: Hydroisomerisation
technology. This is a high-temperature, high-pressure process in
which a catalyst selectively converts the wax molecules
(isomerized) into very high quality base oil. The process removes
wax and thus lowers the pour point of the base oil, resulting in
higher Viscosity Indexes and better yields. >> Relevant chemical
or physical characteristics: The chemical name of the substance
is also lubricating oils (petroleum), C20-C50, and hydrotreated
neutral oil-based. Relevant characteristics are viscosity, viscosity
index, pour point, flash point, colour, Noack, Volatility, and
density. (Please see relevant data sheets). >> What the finished
product is: The finished products are different types of premium
lubricating oils
2804 70 00
3044100/2013
Red Phosphorus (CAS RN 7723-14-0) New
and Yellow Phosphorus (CAS RN
12185-10-3) [, Chemical name: White
Phosphorus P4]
DE
Applicant
ROUND 2014-07-01 >> Commercial name: Yellow Phosphorus,
synonyms: tetraphosphorus, elemental phosphorus, P4 >>
Phosphorus is used to produce intermediates for water treatment
products, plastic additives, products for surface treatment of
metals, pharmaceuticals and plant-protection products. The
intermediate produced in our company for the above uses is
phosphorus trichloride (PCl3). Phosphorus trichloride is produced
from phosphorus and chorine in a continuous reaction where heat
is extracted. >> Intended use of the imported product: >>>
Production of phosphorus chlorides and their derivatives
(phosphates, phosphites, phosphonates). >>> Phosphorus is
used in many production processes.
2815 12 00
3099980/2013
Sodium hydroxide (CAS RN 1310-7302) New
in aqueous solution of a purity by
weight of 49 % or more but not more
than 51 % for use in the production of
alumina
IE
Applicant
ROUND 2014-07-01 The commercial denomination is liquid
caustic soda supplied in aqueous solution. The imported caustic
soda is consumed in a chemical reaction to produce alumina.
Alumina is a refined white powder and the main end use of
alumina is the production of aluminium in smelters.
ex 2823 00 00 10
294577/2011
446/2/1995
Titanium dioxide (CAS RN 13463-67-7): Am.
— of a purity by weight of 99,9 % or
more,
— with an average grain-size of 1,2 μm
AT
DE
FI
FR
Applicant
ROUND 2014-07-01: A request for amendment of the existing text
as follows: Titanium dioxide (CAS RN 13463-67-7): —
of a
purity by weight of 99,9 % or more, — with an average grainsize of 0,7 μm or more but not more than 2,1 μm >> BREAK
2 / 53
28/10/2013
CN code
TARIC
Ref Mail
new or
am.
Description
or more but not more than 1,8 μm
— with a specific surface of 5,0 m²/g or
more, but not more than 7,5 m²/g
Cntr
Position
FR
Public Comments
(2014-07-01)
Round 1.1.2013: OBJECTIONS AGAINST AN
EXISTING TARIFF SUSPENSION/The goods are currently
available in the Community
2827 39 85
3058689/2013
New
FR
Applicant
ROUND 2014-07-01 Barium chloride destinated to a cationic
exchange in the production process of molecular sieves.
Molecular sieves are selective adsorbants according to the size of
the molecular.
2835 10 00
3058712/2013
Sodium hypophosphite monohydrate New
(CAS RN 10039-56-2)
and
Sodium
hypophosphite (CAS RN 7681-53-0)
FR
Applicant
ROUND 2014-07-01 intended use: Incorporation in the
formulations of chemical plating and/or raw material for flame
retardent
2841 70 00
3058664/2013
Ammonium
(CAS RN 13106-76-8)
FR
Applicant
ROUND 2104-07-01 Chemical Catalyst for Epimerisation of
Glucose
2853 00 90
3016792/2013
Trichlorosilane (CAS RN 10025-78-2)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used used in
the production of fiber glass, silica, silicates and many metal
oxides >> the manufacturing process being used It is consumed
in the production of silanes which are vinyl-functional coupling
agents that promote adhesion among unsaturated, polyestertype
resins or crosslinked polyethylene resins or elastomers and
inorganic substrates
>> what the finished product is Fiber
glass, silica, silicates and many metal oxides
2903 39 19
3014243/2013
1-bromo-2-methylpropane (CAS RN 78- New
77-3)
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: 1-bromo-2methylpropane >> Synthesis of active and pharmaceutical
intermediates, as a result of chemical processing (drug used in
treatment of hyperuricemia and chronic gout)
2903 39 90
3007585/2013
1H-perfluorohexane (CAS RN 355-37-3) New
UK
Applicant
ROUND 2014-07-01: >> how the component is to be used: It is
used for making fluoropolymer products as a process solvent
media >> the manufacturing process being used : is used within
the polymerisation reactor during the manufacture of
fluoropolymers. At the end of the reaction C6H are is recovered
from the polymer and is recycled back to the reactor. Additional
C6H is added to make up for losses. >> what the finished product
is : Fluoropolymer used as cable insulation, film, tubes etc
2903 39 90
3007572/2013
Perfluorobutyl
19430-93-4)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: It is
used for making fluoropolymer products as a ingredient of the
polymer >> the manufacturing process being used: is injected
Tetramolybdate New
ethylene
(CAS
New
RN New
3 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
into the polymerisation vessel during the manufacture of the
polymer which is subsequently dried and converted to granules or
pellets for sale. >> what the finished product is : Fluoropolymer
used as cable insulation, film, tubes, etc
ex 2903 39 90 70
3118/04
1,1,1,2-Tetrafluoroethane,
certified Am.
odourless containing a maximum :
— 600 ppm by weight of 1,1,2,2tetrafluoroethane,
— 2
ppm
by
weight
of
pentafluoroethane,
— 2
ppm
by
weight
of
chlorodifluoromethane,
— 2
ppm
by
weight
of
chloropentafluoroethane,
— 2
ppm
by
weight
of
dichlorodifluoromethane
for use in the manufacture of
pharmaceutical grade propellant for
medical metred dose inhalers (CAS RN
811-97-2)
(1)
UK
FR
BE
FR
Applicant
Opposed
ROUND 2014-07-01: Request to amend the existing text
description as follows: 1,1,1,2 Tetrafluoroethane, certified
odourless containing a maximum: - 600 ppm by weight of 1,1,2,2Tetrafluorethane - 2 ppm by weight of pentafluoroethane - 2 ppm
by weight of chlorodifluorométhane - 2 ppm by weight of
chloropentafluoroethane
2
ppm
by
weight
of
dichlorodifluoromethane for further purification to an inhalation
grade of HFC 134a for use as a propellant for medical aerosols
whose contents are taken into the oral or nasal cavities, and /or
the respiratory tract, (CAS RN 811-97-2) >>BREAK 2014-07-01
1.1.07 = suspension
2905 11 00
3090865/2013
Methanol (CAS RN 67-56-1)
New
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: In the
production of acetic anhydride and acetic acid. >> any trade name
for it, Methanol. >> the manufacturing process being used: Acetic
Acid is produced by the carbonylation of methanol, i.e. reacting
methanol with carbon monoxide at high temperature and pressure
in the presence of a catalyst. Acetic Anhydride is produced by the
carbonylation of methyl acetate, i.e reacting methyl acetate with
carbon monoxide (the methyl acetate being produced by reacting
methanol with acetic acid) at high temperature and pressure in the
presence of a catalyst. >> relevant chemical or physical
characteristics; Highly volatile and flammable, colourless liquid
and vapour, toxic, distinctive alcohol odour. >> what the finished
product is Acetic acid and acetic anhydride
2905 19 00
3044132/2013
Polybutyl titanate (CAS RN 162303-51- New
7)
DE
Applicant
ROUND 2014-07-01 >> Intended use of the imported product:
products are titanium alkoxides. They have numerous industrial
uses, for example as catalysts for esterification, transesterification
and olefin polymerisation, as adhesion promoters, as cross-linking
agents for hydroxyl compounds and as components in heatresistant and corrosion-resistant paints.
2905 19 00
3044140/2013
Tetra-2-ethylhexyl titanate (CAS RN New
DE
Applicant
ROUND 2014-07-01 >> Intended use of the imported product:
4 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
1070-10-6)
Public Comments
products are titanium alkoxides. They have numerous industrial
uses, for example as catalysts for esterification, transesterification
and olefin polymerisation, as adhesion promoters, as cross-linking
agents for hydroxyl compounds and as components in heatresistant and corrosion-resistant paints.
2905 19 00
3007548/2013
Titanium tetraisopropoxide
New
UK
Applicant
ROUND 2014-07-01: >> how the component is to be used:
catalyst during monomer manufacture >> any trade name for it:
n/a >> the manufacturing process being used: Chemical esterification of Dimethyl amino ethanol >> relevant chemical or
physical characteristics: colourless to pale yellow liquid with an
alcohol like odour. Melting poing 15-20C, boiling point 240C.
Density 0.97g/cm3 @ 20C >> what the finished product is: DMA3
- Dimethyl ethyl acrylate
2906 19 00
3070358/2013
Cyclopropylmethanol
33-8)
(CAS RN 2516- New
BE
Applicant
ROUND 2014-07-01 >> Name and description The product is a
chemical product under the form of a clear colourless liquid, which
is brought onto the market under the name Cyclopropylcarbinol.
>> Synonyms for the product are Cyclopropylcarbinyl alcohol,
Cyclopropanemethyl
alcohol,
Cyclopropanemethanol,
Cyclopropylmethyl
alcohol,
Cyclopropylmethanol,
1Cyclopropylmethanol, Cyclopropyl Methanol. >> Use The product
is used as an intermediary product destined for the
pharmaceutical industry. Specifically, the Cyclopropylcarbinol is
transformed into an advanced pharmaceutical intermediate, which
in its turn is used for the production of anti-inflammatory agents
and analgesics pharmaceuticals.
ex 2907 23 00 10
1105194/2012
4,4'-Isopropylidenediphenol (CAS RN Am.
80-05-7)
TR
DE
Applicant
Opposed
ROUND 2014-07-01: Objection against running suspension
ROUND 2013-07-01: As an additive in PVC production
2909 19 90
3090880/2013
Tert-butyl methyl ether (CAS RN 1634- New
04-4)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: As a
gasoline blendstock component to oxygenate and thereby raise
the octane number. >> relevant chemical or physical
characteristics; Highly volatile and flammable, colourless liquid
and vapour, toxic, with distinctive alcohol odour. >> what the
finished product is Gasoline.
2910 90 00
3015345/2013
2-[(2-methoxyphenoxy)methyl]oxirane
(CAS RN 2210-74-4)
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: 2-[(2methoxyphenoxy)methyl]oxirane >> Synthesis of active and
pharmaceutical intermediates, as a result of chemical processing
(drug used in treatment chronic angina).
2912 29 00
3007438/2013
4-Isopropylbenzaldehyde (CAS RN 122- New
03-2)
ES
Applicant
ROUND
2014-07-01:
>
Commercial
denomination
CUMINALDEHIDO (CUMINAL PARA o CUMAL) > Intended use
of the imported product: Raw material for manufacturing
New
5 / 53
28/10/2013
CN code
TARIC
Ref Mail
new or
am.
Description
Cntr
Position
Public Comments
fragances ingredients
2912 29 00
3007356/2013
4-tert-Butylbenzaldehyde (CAS RN 939- New
97-9)
ES
Applicant
ROUND 2014-07-01: Commercial denomination T BUTYL
BENZALDEHIDO (BUTYL BENZALDEHYDE) / Intended use of
the imported product: Raw material for manufacturing fragances
ingredients
2914 50 00
3016767/2013
2,2',4,4'New
tetrahydroxybenzophenone (CAS RN 13
1-55-5)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used This is
an effective light stabilizer for protecting plastics, coatings and
cosmetics from the damaging UV radiation which is a component
of natural sunlight. It is very compatible with plastic optical lens
materials and is extremely useful as a UV screen in these
products >> the manufacturing process being used production of
UV blocker in the process of manufacturing plastic packaging >>
what the finished product is cosmetics/perfumes
2914 70 00
3044264/2013
Tetrachloro-p-benzoquinone (CAS RN New
118-75-2)
DE
Applicant
ROUND 2014-07-01 >> Intended use of the imported product:
Used by our pigments business unit in the production of pigments
>> End-use: Use in the paints industry
ex 2916 13 00 20
3155/3/2000
Zinc dimethacrylate, in the form of Am.
powder (CAS RN 13189-00-9)
FR
Applicant
ROUND 2014-07-01: Request for amending the existing text
description as follows: Zinc Dimethacrylate, whether or not
containing by weight 2% of 2,6-di-tert-butyl-alpha-dimethyl aminop-cresol, in the form of powder
>>BREAK 2014-07-01
Prolongation Exercise 1/1/2014
2916 14 00
3092998/2013
Ethyl methacrylate (CAS RN 97-63-2)
New
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used, used
as a monomer >> the manufacturing process being used
Polymerisation >> what the finished product is Coating resin
2916 20 00
3070420/2013
2-methyl cyclohexylacetate (CAS RN New
5726-19-2)
BE
Applicant
ROUND 2014-07-01 >> Packaging : the product is imported in
bulk liquid isocontainers of 20 feet >> Use of the product : for the
industrial production of Hydrogen Peroxyde : the manufacturing
process involves the catalysis of the reaction of H2 with
atmospheric O2 to give H2O2. ### is used as a H2 carrier and is
dissolved in two solvents, one nonpolar (aromatic solvent) and the
other polar (2-MCHA). Collectively, the anthraquinone and
solvents are called the working solution. This working solution is
recycled.
2916 39 90
3044280/2013
3-Fluorobenzoyl
1711-07-5)
DE
Applicant
ROUND 2014-07-01 >> Intended use of the imported product:
production of intermediate product for the manufacture of plant
protection products >> Name of product manufactured from the
imported product: an intermediary product, produced with a
contractual commitment to confidentiality, for the manufacture of a
plant protection product (production and use covered by patent by
the end customer); consequently the chemical name cannot
chloride
(CAS
RN New
6 / 53
28/10/2013
CN code
TARIC
Ref Mail
new or
am.
Description
Cntr
Position
Public Comments
simply be disclosed. >> End-use: use in plant protection end
products
2917 19 90
3014005/2013
Dimethyl but-2-ynedioate (CAS RN 762- New
42-5)
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: dimethyl but-2ynedioate >> Synthesis of active and pharmaceutical
intermediates, as a result of chemical processing (drug used in
combination with other antiretroviral agents for the treatment of
HIV-1 infection).
2917 19 90
3044348/2013
n-Dodecenylbernsteinsäureanhydrid
(CAS RN 19780-11-1)
New
DE
Applicant
ROUND 2014-07-01 >> Synonym: 3-(2-dodecenyl) succinic
anhydride >> Intended use of the imported product: The raw
material n-dodecenyl succinic acid anhydride is used for the
production of additives >> End-use: Use as photoprotection agent
in the paints industry.
2917 20 00
3093035/2013
4-Methyltetrahydrophthalic
(CAS RN 34090-76-1)
anhydride New
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used As a
hardener in epoxy resin systems >> the manufacturing process
being used Dielsalder reaction >> what the finished product is
Composite structures & coatings
2917 39 95
3044407/2013
Dimethyl 2-nitroterephthalate (CAS RN New
5292-45-5)
DE
Applicant
ROUND 2014-07-01 >> Commercial name: Nitro Dimethyl
Terephthalate TTR >> Intended use of the imported product: The
raw material is used for the production of colourants/organic
pigments. >> End-use: Used in the paints industry as a colourant
preparation, e.g. for water-based transparent woodstains, to
colour emulsion paints, glass paints, water-based paints, latex
and water-based inks
2918 99 90
3061716/2013
Methyl
(E)-3-3-methoxy-2-(2- New
chloromethylphenyl)-2-propenoate (CAS
RN 117428-51-0)
FR
Applicant
ROUND
2014-07-01
>>
Methyl
(E)-3-methoxy-2-(2chloromethylphenyl)-2-propenoate is a key component with 2fluoro-6(trifluromethyl) pyridine used in synthesis of Picoxystrobin
technical. >> This production is a batch process with 9 steps:
reactions, distillation, concentration, crystallization, centrifugation,
drying
2919 90 00
3090900/2013
(1-methylethylidene)di-4,1New
phenylenetetraphenyl
diphosphate
(CAS RN 5945-33-5)
UK
Applicant
> ROUND 2014-07-01 >> how the component is to be used: As a
flame retardant to be compounded/blended with polymers on an
extruder with glass fibres, fillers colour (masterbatch) and antioxidants >> the manufacturing process being used: This product
is compounded with polymer on an extruder with or without other
components including glass fibres, fillers, colour (masterbatch)
and anti-oxidants to produce a pellet (this is an intermediate). The
pellet is then converted in different processes such as injection
moulding or extrusion to produce flame retarded articles such as
television housings, casings/boxes for electrics etc >> what the
finished product is: Flame retardent
7 / 53
28/10/2013
CN code
TARIC
Ref Mail
new or
am.
Description
Cntr
Position
Public Comments
2921 42 00
3044480/2013
4-Nitroaniline (CAS RN 100-01-6)
New
DE
Applicant
ROUND 2014-07-01 >> Commercial name: p-nitroaniline >>
Synonyms: p-nitrophenylamine; 1-amino-4-nitrobenzene; 4nitrobenzenamine >> Packaging: plastic containers >> Intended
use of the imported product: P-nitroaniline is used by our
pigments business unit in the production of pigments. >> End-use:
use in the paints industry
ex 2921 42 00 86
318053/2012
2,5-Dichloroaniline of a purity by weight Am.
of 99,5 % or more (CAS RN 95-82-9)
CZ
Applicant
ROUND 2014-07-01: A request to amend the existing text
description as follows: 2,5-Dichloroaniline (CAS RN 95-82-9)
>>BREAK 2014-07-01 1.1.2013 Round: for production of
pigments and dyes
2921 49 00
3044498/2013
3,4-xylidine (CAS RN 95-64-7)
New
DE
Applicant
ROUND 2014-07-01 >> Commercial name/synonyms: 3,4dimethylaniline >> Intended use of the imported product:
production of 3,4 xylenol/3,4 dimethylphenol >> Name of product
manufactured from the imported product: 3,4 xylenol/3,4
dimethylphenol >> End-use: The end product is used in the
polymers industry.
ex 2921 49 00 70
167065/2010
2-Chlorobenzylamine (CAS RN 89-97-4) Am.
FR
Applicant
ROUND 2014-07-01: Suspension shall be closed
2922 39 00
3013756/2013
2-amino-(5-chlorophenyl)phenylmethanone (CAS RN 719-59-5)
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: 6-methoxy11H-benzo[b][1]benzazepine >> Synthesis of active and
pharmaceutical intermediates, as a result of chemical processing
2922 49 85
3016717/2013
12-Aminododecanoic
(CAS RN 693-57-2)
UK
Applicant
>> how the component is to be used Used in plastics for food
packaging and automotive parts >> the manufacturing process
being used Made from Cyclohexanone. The chain is BenzeneCyclohexane – Cyclohexanone – 12-Aminododecainoic Acid
(ADA). After import, it is manufactured into Polyamide 6/6.6/12
and 6/12 PA6/6.6/12: there is a polymerization in the reactors with
Caprolactam, AH Salt and ADA, after that the product goes to
washing section to eliminate with water the raw material that has
not reacted or not reacted enough and finally to drying section to
eliminate most of the water. PA6/12: there is a polymerization in
the reactors with Caprolactam and ADA, after that the product
goes to washing section to eliminate with water the raw material
that has not reacted or not reacted enough and finally to drying
section to eliminate most of the water. >> what the finished
product is Food packaging and automotive parts
2924 29 98
3041213/2013
N-benzyl-2-[4-fluoro-3(trifluoromethyl)phenoxy]butanamide
(CAS RN 113614-08-7)
DK
Applicant
ROUND 2014-07-01 The product to be imported with the
commercial denomination # # # is intended to be used as a
herbicide active ingredient in the production of herbicide end-use
products. The finished products will be sold to agrochemical
distributers within the EU.
New
Acid New
New
8 / 53
28/10/2013
CN code
TARIC
Ref Mail
new or
am.
Description
Cntr
Position
Public Comments
2924 29 98
3044522/2013
N,N'-(3,3'-dimethylbiphenyl-4,4'New
ylene)di(acetoacetamide) (CAS RN 9196-3)
DE
Applicant
ROUND
2014-07-01
>>
Synonyms:
p,p'-Bis(oacetoacetotoluidide); naphthol AS-G >> Intended use of the
imported product: Naphthol AS-G is used by our Pigments BU in
pigment production >> End use: Use in the paint industry
2926 90 95
3041200/2013
(S)-cyano(3-phenoxyphenyl)methyl 2,2- New
dimethyl-3-{(1Z,1S,3R)-3-oxo-3-[2,2,2trifluoro-1-(trifluoromethyl)ethoxy]prop-1en-1-yl}cyclopropanecarboxylate (CAS
RN 101007-06-1)
DK
Applicant
ROUND 2014-07-01: The product to be imported with the
commercial denomination ### is intended to be used as an
insecticide active ingredient in the production of insecticide enduse products. The finished products will be sold to agrochemical
distributers within and outside the EU.
2926 90 95
3062499/2013
Butyl
(R)-2-[4-(4-cyano-2- New
fluorophenoxy)phenoxy]propionate
(CAS RN 122008-85-9)
FR
Applicant
ROUND 2014-07-01 Cyhalofop-Butyl is an active ingredient used
in the manufacture of selective rice herbicides with unique mode
of action. It is the only herbicide that can be used at the earliest
stage of the plant.
2930 90 99
3082450/2013
Trimethylsulfoxonium
(CAS RN 1774-47-6)
IT
Applicant
ROUND 2014-07-01 Synthesis of active and pharmaceutical
intermediates, as a result of chemical processing (### drug used
in combination with other antiretroviral agents for the treatment of
HIV-1 infection).
2930 90 99
3014041/2013
Ethanethioamide (CAS RN 62-55-5)
New
IT
Applicant
ROUND
2014-07-01
>>
IUPAC
DENOMINATION:
ethanethioamide >> Synthesis of active and pharmaceutical
intermediates, as a result of chemical processing (drug used in
treatment of hyperuricemia and chronic gout).
2931 90 90
3013980/2013
Di-tert-butylphosphane (CAS RN 819- New
19-2)
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: di-tertbutylphosphane >> Synthesis of active and pharmaceutical
intermediates, as a result of chemical processing (drug used in
treatment of hyperglycemia of patients with type 2 diabetes).
2931 90 90
3016854/2013
1,1,1,3,3,3-Hexamethyldisilazane
(CAS RN 999-97-3)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used used as
a component in the manufacture of a liquid silicone rubber >> the
manufacturing process being used injection moulding >> what the
finished product is elastomeric articles requiring self-lubricating
properties
2932 19 00
3014113/2013
Tetrahydro-α-(1-naphthylmethyl)furan-2- New
propionic acid (CAS RN 25379-26-4)
IT
Applicant
ROUND 2014-07-01
>> Chemical formula: C18H20O3 >>
Packaging: polyethylene drums of 200 kg net each >> Use:
chemical intermediate for the production of an active
pharmaceutical ingredient called “Naftidrofuryl Oxalate” (CAS
3200-06-4, vasodilator)
2932 20 90
3015353/2013
2,2-dimethyl-1,3-dioxane-4,6-dione
(CAS RN 2033-24-1)
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: 2,2-dimethyl1,3-dioxane-4,6-dione >> Synthesis of active and pharmaceutical
intermediates, as a result of chemical processing (drug used in
treatment of hyperglycemia of patients with type 2 diabetes).
iodide New
New
New
9 / 53
28/10/2013
CN code
TARIC
Ref Mail
new or
am.
Description
Cntr
Position
Public Comments
2932 99 00
3041900/2013
1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3)
New
AT
Applicant
ROUND 2014-07-01 >> Synonymes: 1,3-Dimethoxaphthalane >>
Used for the production of o-Phthalaldehyde
ex 2932 99 00 40
3114/1/04
1,3:2,4-Bis-O-(3,4dimethylbenzylidene)-D-glucitol
RN 135861-56-2)
Am.
BE
ES
FR
Applicant
Co-applicant
Opposed
Prolongation Exercise 1/1/2014 ROUND 1/7/2014: OBJECTION
FROM FR
(CAS
ex 2933 21 00 50
837/06
1-Bromo-3-chloro-5,5-dimethylhydantoin Am.
(CAS RN 16079-88-2)
NL
Applicant
Trade names : Bromicide granules; BioTrol 88P Alternative
chemical name : 2,4-imidazolidinedione Round 1/7/2014: Text
amendment? - the CAS number 16079-88-2 corresponds only to
the compound: "1-Bromo-3-chloro-5,5-dimethylhydantoin" or "1Bromo-3-chloro-5,5-dimethylimidazolidine-2,4-dione",
- while
CAS number 32718-18-6 is more general and correspond to all
the compounds named "Bromochlorodimethylhydantoin or
BCDMH" and also sometimes to both structures
2933 39 99
3093544/2013
Pyridine-2-thiol 1-oxide, sodium salt New
(CAS RN 3811-73-2)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: ### is
a broad spectrum antifungal agent and is effective against most
fungi (yeasts and mould) commonly found in contaminated metal
working fluid systems. It is one of the very few effective
treatments in this area. The solution is added to produce metal
working fluids / cleaning agents. In addition, the product is used in
the construction industry for products such as paints, tiles, wall
partitions, sealants and grouts >> the manufacturing process
being used >>> ### product as sold 1250ppm (parts per million)
is intended to be diluted to be used at a maximum of 200 to 500
ppm (this will show further processing of the product i.e not
intended to be used prior to processing into a final product due to
requirement of dilution etc). >>> Product is used in the production
of water miscible system cleaners for machinery amongst other
products (see below) >> what the finished product is Metal
working fluids Printing inks etc
2933 39 99
3013791/2013
4-chloro-1-methylpiperidine (CAS
5570-77-4)
RN New
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: 4-chloro-1methylpiperidine) >> Synthesis of active and pharmaceutical
intermediates, as a result of chemical processing, drug used in
treatment of allergic rhinitis, urticaria and other skin allergies
2933 49 10
3013950/2013
Ethyl
6,7,8-trifluoro-1- New
[formyl(methyl)amino]-4-oxo-1,4dihydroquinoline-3-carboxylate
(CAS
RN 100276-65-1)
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: ethyl 6,7,8trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3carboxylate >> Synthesis of active and pharmaceutical
intermediates, as a result of chemical processing (drugs used as
a broad-spectrum antibiotic for veterinary use)
2933 59 95
3070316/2013
2-diethylamino-6-hydroxy-4-
BE
Applicant
ROUND 2014-07-01 >> Commercial denomination: Pirimiphos
New
10 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
methylpyrimidine (CAS RN 42487-72-9)
Public Comments
precursor >> 2-Diethylamino-6-hydroxy-4-methylpyrimidine is
used to produce an active ingredient for agrochemical purpose
(insecticide)
2933 69 80
3044553/2013
1,3,5-triazine-2,4,6(1H,3H,5H)-trithione,
trisodium salt (CAS RN 17766-26-6)
New
DE
Applicant
ROUND 2014-07-01 >> Commercial name: Trinatriumsalz
(trisodium salt) >> Description of function: Precipitation agent >>
Intended use: Raw material for the production of a precipitant
solution for the environmentally-sound removal of dissolved,
complexed monovalent and divalent heavy metals from
wastewater (e.g. lead, cadmium, copper, nickel, mercury and
silver). >> End-use of imported product: Production of ready-foruse precipitant solution
2933 99 80
3058760/2013
Phenol,
2-(2H-benzotriazol-2-yl)-4- New
methyl-6-(2-methyl-2-propenyl)
(CAS
RN 98809-58-6)
FR
UK
Applicant
Co-applicant
ROUND 2014-07-01 Confidential
2933 99 80
3044564/2013
Octrizol (INN) (CAS RN 3147-75-9)
DE
Applicant
ROUND 2014-07-01 >> Intended use of the imported product:
The material is used as part of the formulation for the production
of polycarbonate and polycarbonate blends as a UV absorber. >>
Name of product manufactured from the imported product:
Polycarbonates >> End use Polycarbonate resin
2933 99 80
3013917/2013
6-methoxy-11H-benzo[b][1]benzazepine New
(CAS RN 4698-11-7)
IT
Applicant
ROUND 2014-07-01 >> IUPAC DENOMINATION: 6-methoxy11H-benzo[b][1]benzazepine >> Synthesis of active and
pharmaceutical intermediates, as a result of chemical processing
(anticonvulsant drugs mainly used in treatment of epilepsy)
ex 2934 99 90 55
3192/3/2000
Olmesartan medoxomil (INN) (CAS RN Am.
144689-63-4)
DE
Applicant
Prolongation Exercise 1/1/2014 SH 2002: 2934 99 90 ROUND
1/7/2014: the product is listed on Annex 3 to CN, therefore the
product is duty free in any case
3204 11 00
3090484/2013
Dye
C.I.
Disperse
Blue
360 New
(CAS RN 435-600-5) and preparations
based thereon with a Dye C.I. Disperse
Blue 360 content of 99 % by weight or
more determined by high pressure liquid
chromatography
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: used in
the coloration of polymers >> the manufacturing process being
used: The dye is formulated into a liquid ink that is used in the
digital sublimation ink sector. >> relevant chemical or physical
characteristics: This dye is a critical component in making high
intensity black digital inks >> what the finished product is: ink
ex 3204 11 00 10
499676/2013
635935/2010
Dye C.I. Disperse Yellow 54 (CAS RN Am.
7576-65-0) also known as C.I. Solvent
Yellow 114, in powder form, with a purity
by weight of 97 % or more
- Version 2013 -
UK
UK
DE
Applicant
Applicant
Opposed
ROUND 2014-07-01: Request for a suspension based on a
classification committee decision that pigment preparations can
only be used if the imported product contains 100% of a pigment.
The proposed text description is the following: Dye C.I. Disperse
Yellow 54 (CAS RN 7576-65-0 or 75216-45-4 or 12223-85-7) also
known as C.I. Solvent Yellow 114 and preparations based thereon
with a Dye C.I. Disperse Yellow 54 content of 97% or more
New
Dye C.I. Disperse Yellow 54 also known
11 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
as C.I. Solvent Yellow 114
- Version 2011 -
Public Comments
determined by high pressure liquid chromatography >>BREAK
2014-07-01 ROUND 2014-01-01: >> how the component is to be
used: Used as a high purity colorant for use in PET
>> what
the finished product is: Food contact materials ROUND 2013-0701: request for amendment referring to description: "Dye C.I.
Disperse Yellow 54, also known as C.I. Solvent Yellow 114 with a
purity of 97% or more as determined by high pressure liquid
chromatography"
ex 3204 11 00 20
631007/2010
Dye C.I. Disperse Yellow 241 (CAS Am.
RN 83249-52-9), with a purity of 97 % or
more as determined by high pressure
liquid chromatography
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The requested text description is the
following: Dye C.I. Disperse Yellow 241 (CAS RN 83249-52-9)
and preparations based thereon with a Dye C.I. Disperse Yellow
241 content of 97% or more determined by high pressure liquid
chromatography >>BREAK 2014-07-01 ROUND 2013-07-01:
request for amendment of description by UK: "Dye C.I. Disperse
Yellow 241, with a purity of 97% or more as determined by high
pressure liquid chromatography"
ex 3204 11 00 40
247748/2011
Dye C.I. Disperse Red 60 (CAS RN Am.
17418-58-5)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text is the following: Dye C.I.
Disperse Red 60 (CAS RN 17418-58-5) and preparations based
thereon with a Dye C.I. Disperse Red 60 content of 50% or more
as determined by high pressure liquid chromatography
>>BREAK 2014-07-01 ROUND 1/1/2014: CAS RN 17418-58-5
added
ex 3204 11 00 50
300340/2011
Dye C.I. Disperse Blue 72 (CAS RN 81- Am.
48-1)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Disperse Blue 72 (CAS RN 81-48-1 or CAS RN 6408-726) and preparations based thereon with a Dye C.I. Disperse Blue
72 content of 95% or more determined by high pressure liquid
chromatography
ex 3204 11 00 60
247805/2011
Dye C.I. Disperse Blue 359 (CAS RN Am.
213328-78-0)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Disperse Blue 359 (CAS RN 62570-50-7) and
preparations based thereon with a Dye C.I. Disperse Blue 359
12 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
content of 50% or more determined by high pressure liquid
chromatography
ex 3204 11 00 70
326913/2012
Dye C.I. Disperse Red 343 (CAS RN Am.
99035-78-6)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Disperse Red 343 (CAS RN 72968-82-2 or CAS RN
99035-78-6) and preparations based thereon with a Dye C.I.
Disperse Red 343 content of 95% or more determined by high
pressure liquid chromatography
>>BREAK 2014-07-01
Dyestuff/pigment for polymer colouration
3204 12 00
3007605/2013
Dye C.I. Acid Blue 80 (CAS RN 4474- New
24-2)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: For
colouration of Detergents and Household Cleaning Liquids >>
the manufacturing process being used : Condense 1 mol. 1,4dichloroanthraquinone with 2 mols. mesidine, sulphonate and
convert to the sodium salt >> relevant chemical or physical
characteristics: Reddish Blue Powder >> what the finished
product is: Detergent/Cleaning Liquid
ex 3204 12 00 10
989532/2011
Dye C.I. Acid Blue 9 (CAS RN 3844-45- Am.
9)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based
thereon with a Dye C.I. Acid Blue 9 content of 50% or more
determined by high pressure liquid chromatography
ex 3204 13 00 10
807/06
Dye C.I. Basic Red 1 (CAS RN 989-38- Am.
8)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based
thereon with a Dye C.I. Basic Red 1 content of 50% or more
determined by high pressure liquid chromatography
ex 3204 13 00 30
1090257/2012
Dye C.I. Basic Blue 7 (CAS RN 2390- Am.
60-5)
BE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations
based thereon with a Dye C.I. Basic Blue 7 content of 50% or
more determined by high pressure liquid chromatography
>>BREAK 2014-07-01 ROUND 2013-07-01: product is added to a
chemical solution in a reactor vessel. In this reactor a controlled
precipitation reaction takes place during which product is
13 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
precipitated in a bonding with metal salts. After a filtration step
and a consecutive spray drying step, the end product is formed,
namely dry pigment
ex 3204 13 00 40
1090288/2012
Dye C.I. Basic Violet 1 (CAS RN 603- Am.
47-4)/(CAS RN 8004-87-3)
BE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3
or CAS RN 1325-82-2) and preparations based thereon with a
Dye C.I. Basic Violet 1 content of 90% or more determined by
high pressure liquid chromatography >>BREAK 2014-07-01
ROUND 2013-07-01: Product is added to a chemical solution in a
reactor vessel. In this reactor a controlled precipitation reaction
takes place during which product is precipitated in a bonding with
metal salts. After a filtration step and a consecutive spray drying
step, the end product is formed, namely dry pigment
3204 15 00
3044589/2013
C.I. Vat Red 1 (CAS RN 2379-74-0)
New
DE
Applicant
ROUND 2014-07-01 >> Synonyms: Pigment Red 181; Dye CI vat
red 1 Vat Pink R >> Intended use of the imported product:
Kosmetik Pink is used by our customers as an organic pigment in
the cosmetics industry as well as in the production of personal
care products. >> Name of product manufactured from the
imported product: mouth wash and toothpaste
ex 3204 15 00 10
423/3/1994
Dye C.I. Vat Orange 7 (C.I. Pigment Am.
Orange 43) (CAS RN 4424-06-0)
DE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43) (CAS RN 442406-0) and preparations based thereon with a Dye C.I. Vat Orange
7 content of 20% or more determined by high pressure liquid
chromatography >>BREAK 2014-07-01 ECICS: CI Vat Orange
7, code NC: 32041500 colorant de cuve, no CAS: 4424-06-0
ex 3204 15 00 60
851/05
Dyestuff C.I. Vat Blue 4 (CAS RN 81-77- Am.
6)
DE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dyestuff C.I. Vat Blue 4 (CAS RN 81-77-6) also known a C.I.
Pigment Blue 60 and preparations based thereon with a Dyestuff
C.I. Vat Blue 4 content of 50% or more determined by high
pressure liquid chromatography
>>BREAK 2014-07-01
Prolongation Exercise 1/1/2014
3204 17 00
384794/2013
994086/2011
COM text proposal:
Dye C.I. Pigment Yellow 174
NL
UK
Applicant
Applicant
ROUND 2014-07-01 (renewal/rollover) ROUND 2014-01-01
(renewal/rollover) Type of product in which it is to be incorporated:
Am.
14 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
DE
DE
Opposed
Opposed
offset printing inkt
C.I. Pigment Yellow 174 (CAS RN
78952-72-4) with a purity of 98 % by
weight or more, in the form of beads
3204 17 00
3090942/2013
Dye
C.I.
Pigment
Yellow
147 New
(CAS RN 4118-16-5) and preparations
based thereon with a Dye C.I. Pigment
Yellow 147 content of 98 % or more
determined by high pressure liquid
chromatography
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used
Dyestuff/pigment for polymer colouration. >> the manufacturing
process being used The commercial denomination of the material
is high purity colorant for use in PET. The material is intended to
be used as a colorant incorporated into food contact PET articles
(via liquid masterbatches) at the time of article manufacture. >>
what the finished product is Plastic food containers
3204 17 00
384769/2013
989554/2011
C.I. Pigment Red 57:1 (CAS RN 5281- Am.
04-9) with a purity of 98 % by weight or
more, in the form of beads
NL
UK
CZ
CZ
DE
DE
Applicant
Applicant
Opposed
Opposed
Opposed
Opposed
ROUND 2014-07-01 (rollover/renewal) ROUND 2014-01-01
(rollover/renewal) >> Commercial name: Beads of C.I. pigment
Red 57:1 with a purity of 98% of higher >> Type of product in
which it is to be incorporated: offset printing inkt
3204 17 00
3045147/2013
C.I. Pigment Red 48:2 (CAS RN 7023- New
61-2)
DE
Applicant
ROUND 2014-07-01 >> Synonym: 2-Naphthalenecarboxylic acid,
4-[2-(5-chloro-4-methyl-2-sulfophenyl)diazenyl]-3-hydroxy-,
calcium salt(1:1) >> Intended use of the imported product: The
product is used for seed colouring >> End use: Colouring seeds
ex 3204 17 00 10
498/7/1995
Dye C.I. Pigment Yellow 81 (CAS RN Am.
22094-93-5)
DE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and
preparations based thereon with a Dye C.I. Pigment Yellow 81
content of 50% or more determined by high pressure liquid
chromatography >>BREAK 2014-07-01 Prolongation Exercise
1/1/2014
ex 3204 17 00 15
991704/2011
Dye C.I. Pigment Green 7 (CAS RN Am.
1328-53-6)
UK
DE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
15 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations
based thereon with a Dye C.I. Pigment Green 7 content of 40% or
more determined by high pressure liquid chromatography
>>BREAK 2014-07-01 Round 1/1/2014: opposed by Germany
ex 3204 17 00 20
1013616/2011
987080/2011
Dye C.I. Pigment Blue 15:3 (CAS RN Am.
147-14-8)
TR
UK
DE
Applicant
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations
based thereon with a Dye C.I. Pigment Blue 15:3 content of 35%
or more determined by high pressure liquid chromatography
>>BREAK 2014-07-01 Round 1/1/2014: opposed by Germany
ex 3204 17 00 25
991729/2011
Dye C.I. Pigment Yellow 14 (CAS RN Am.
5468-75-7)
UK
BE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and
preparations based thereon with a Dye C.I. Pigment Yellow 14
content of 25% or more determined by high pressure liquid
chromatography >>BREAK 2014-07-01 1/7/2013 round: objection
has been withdrawn
ex 3204 17 00 30
1064/2007
Dye C.I. Pigment Yellow 97 (CAS RN Am.
12225-18-2)
DE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Yellow 97 (CAS RN 12225-18-2) and
preparations based thereon with a Dye C.I. Pigment Yellow 97
content of 30% or more determined by high pressure liquid
chromatography
>>BREAK 2014-07-01 10.07.2012 COMM:
Sufficient imports trade name : Novoprem Gelb FLG
ex 3204 17 00 35
991732/2011
Dye C.I. Pigment Red 202 (CAS RN Am.
3089-17-6)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations
based thereon with a Dye C.I. Pigment Red 202 content of 70%
or more determined by high pressure liquid chromatography
16 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
ex 3204 17 00 40
1149/2009
Dye C.I. Pigment Yellow 120 (CAS RN Am.
29920-31-8)
DE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and
preparations based thereon with a Dye C.I. Pigment Yellow 120
content of 50% or more determined by high pressure liquid
chromatography
ex 3204 17 00 45
994091/2011
Dye C.I. Pigment Violet 27
Am.
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Violet 27 (CAS RN 12237-62-6) and
preparations based thereon with a Dye C.I. Pigment Violet 27
content of 90% or more determined by high pressure liquid
chromatography
>>BREAK 2014-07-01
1/7/2013 round:
probably quota?
ex 3204 17 00 50
1150/2009
Dye C.I. Pigment Yellow 180 (CAS RN Am.
77804-81-0)
DE
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Yellow 180 (CAS RN 77804-81-0) and
preparations based thereon with a Dye C.I. Pigment Yellow 180
content of 90% or more determined by high pressure liquid
chromatography
ex 3204 17 00 60
246360/2011
Dye C.I. Pigment Red 53:1 (CAS RN Am.
5160-02-1)
DE
NL
BE
Applicant
Co-applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Red 53:1 (CAS RN 5160-02-1) and preparations
based thereon with a Dye C.I. Pigment Red 53:1 content of 50%
or more determined by high pressure liquid chromatography
>>BREAK 2014-07-01 1/7/2013 round: opposion has been
withdrawn
ex 3204 17 00 70
329456/2011
Dye C.I. Pigment Yellow 13 (CAS RN Am.
5102-83-0)
UK
NL
BE
Applicant
Co-applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Yellow 13 (CAS RN 5102-83-0 or CAS RN
6358-85-6 or 15541-56-7) and preparations based thereon with a
Dye C.I. Pigment Yellow 13 content of 60% or more determined
by high pressure liquid chromatography >>BREAK 2014-07-01
17 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
1/7/2013 round: opposion has been withdrawn
ex 3204 17 00 75
1096809/2012
Dye C.I. Pigment Orange 5 (CAS RN Am.
3468-63-1)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Orange 5 (CAS RN 3468-63-1) and
preparations based thereon with a Dye C.I. Pigment Orange 5
content of 80% or more determined by high pressure liquid
chromatography >>BREAK 2014-07-01 ROUND 2013-07-01: It is
used in inks, plastic coating and paint, similar to all other pigment
suspensions already in existence in chapter sub-heading 320417
ex 3204 17 00 80
320306/2012
Dye C.I. Pigment Red 207 (CAS RN Am.
71819-77-7)
NL
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Red 207 (CAS RN 71819-77-7) and
preparations based thereon with a Dye C.I. Pigment Red 207
content of 50% or more determined by high pressure liquid
chromatography >>BREAK 2014-07-01 For colouring ink, paint
or plastic
ex 3204 17 00 85
326809/2012
Dye C.I. Pigment Blue 61 (CAS RN Am.
1324-76-1)
UK
BE
Applicant
Co-applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations
based thereon with a Dye C.I. Pigment Blue 61 content of 35% or
more determined by high pressure liquid chromatography
>>BREAK 2014-07-01 Used in the manufacture of water base
ink, industrial paint, textile printing and plastics
ex 3204 17 00 88
326853/2012
Dye C.I. Pigment Violet 3 (CAS RN Am.
1325-82-2)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Pigment Violet 3 (CAS RN 1325-82-2) and preparations
based thereon with a Dye C.I. Pigment Violet 3 content of 90% or
more with or without a polymeric dispersant >>BREAK 2014-0701 Used in the manufacture of water base ink, industrial paint,
textile printing and plastics
ex 3204 19 00 70
3202/1/2000
Dye C.I. Solvent Red 49 (CAS RN 509- Am.
DE
Applicant
ROUND 2014-07-01: Request for an amended text description
18 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
34-2)
IT
Co-applicant
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Solvent Red 49:2 (CAS RN 1103-39-5 and preparations
based thereon with a Dye C.I. Solvent Red 49:2 content of 90% or
more determined by high pressure liquid chromatography
>>BREAK 2014-07-01 Prolongation Exercise 1/1/2014
ex 3204 19 00 71
635959/2010
Dye C.I. Solvent Brown 53 (CAS RN Am.
64696-98-6)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Solvent Brown 53 (CAS RN 64696-98-6) and
preparations based thereon with a Dye C.I. Solvent Brown 53
content of 95% or more determined by high pressure liquid
chromatography
ex 3204 19 00 72
499715/2013
635595/2010
Dye C.I. Solvent Yellow 93 in powder Am.
form, with a purity by weight of 97 % or
more
- Version 2013 -
UK
UK
DE
Applicant
Applicant
Opposed
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Solvent Yellow 93 (CAS RN 4702-90-3) and preparations
based thereon with a Dye C.I. Solvent Yellow 93 content of 97%
or more determined by high pressure liquid chromatography
>>BREAK 2014-07-01 ROUND 2014-01-01 (renewal/rollover): >>
how the component is to be used: Used as a high purity colorant
for use in PET
>> what the finished product is: Food contact
materials
ROUND 2013-07-01: request for amendment of
description "Dye C.I. Solvent Yellow 93 with a purity of 97% or
more determined by high pressure liquid chromatography"
Dye C.I. Solvent Yellow 93 (CAS RN
4702-90-3)
- Version 2011 -
ex 3204 19 00 73
635551/2010
Dye C.I. Solvent Blue 104 (CAS RN Am.
116-75-6) with a purity of 97 % or more
determined by high pressure liquid
chromatography
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations
based thereon with a Dye C.I. Solvent Blue 104 content of 97% or
more determined by high pressure liquid chromatography
>>BREAK 2014-07-01
ROUND 2013-07-01: request for
amendment of description by UK: "Dye C.I. Solvent Blue 104 with
a purity of 97% or more determined by high pressure liquid
chromatography"
ex 3204 19 00 77
303586/2011
Dye C.I. Solvent Yellow 98 (CAS RN Am.
27870-92-4)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
19 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN
12671-74-8) and preparations based thereon with a Dye C.I.
Solvent Yellow 98 content of 95% or more determined by high
pressure liquid chromatography
ex 3204 19 00 84
326949/2012
Dye C.I. Solvent Blue 67 (CAS RN Am.
12226-78-7)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations
based thereon with a Dye C.I. Solvent Blue 67 content of 98% or
more determined by high pressure liquid chromatography
>>BREAK 2014-07-01 Dyestuff/pigment for polymer colouration
ex 3204 19 00 85
326934/2012
Dye C.I. Solvent Red HPR
Am.
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Solvent Red HPR (CAS RN 75198-96-8) and
preparations based thereon with a Dye C.I. Solvent Red HPR
content of 95% or more determined by high pressure liquid
chromatography >>BREAK 2014-07-01 Dyestuff/pigment for
polymer colouration
ex 3204 20 00 20
1004877/2011
Dye C.I. Fluorescent Brightener 71 Am.
(CAS RN 16090-02-1)
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Fluorescent Brightener 71 (CAS RN 16090-02-1) and
preparations based thereon with a Dye C.I. Fluorescent
Brightener 71 content of 94% or more determined by high
pressure liquid chromatography
ex 3204 20 00 30
1010644/2011
Dye
C.I.
Fluorescent
351 (CAS RN 38775-22-3)
Brightener Am.
UK
Applicant
ROUND 2014-07-01: Request for an amended text description
based on a classification committee decision that pigment
preparations can only be used if the imported product contains
100% of a pigment. The proposed text description is the following:
Dye C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and
preparations based thereon with a Dye C.I. Fluorescent
Brightener 351 content of 90% or more determined by high
pressure liquid chromatography
ex 3208 90 19 15
ex 3902 90 90 94
723/05
724/05
Modified,
chlorinated
whether or not in a
dispersion
polyolefins, Am.
solution or
NL
Applicant
ROUND 2014-07-01: Request to split the existing measure in two
according to the two TARIC codes and to amend the existing text
TARIC code 3208901915 as follows: Chlorinated polyolefins,
20 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
whether or not in a solution or dispersion >>BREAK 2014-07-01
Prolongation Exercise 1/1/2014
3212 90 00
3045185/2013
Paste-like pigment concentrate used to New
produce printing inks, consisting of:
— ink pigments with a content of 20 %
by weight or more but not more than
40 % by weight,
— binders (polymeric resins),
— non-aqueous liquid components and
— additives
DE
Applicant
ROUND 2014-07-01 >> Commercial name Concentrates and
bases, Inkredible bases (I-bases) >> Synonyms: Concentrate mix
>> Mode of operation: Component/constituent for printing inks.
The flush technology based concentrates are a product family.
The composition of all these concentrates is basically similar.
They consist of pigments (organic ink pigments or carbon black)
and binders. The pigment content of the concentrates is much
higher than that of finished printing inks, production of which
requires the targeted addition of specific blends containing only
binders and no pigments. The binders contained in the
concentrates consist of customised combinations of polymeric
resins, usually based on natural resins (colophony), and various
liquid components such as vegetable oils (e.g. soybean oil),
vegetable oil fatty acid esters and mineral oils. >> Intended use:
Manufacture of printing ink: the pigment concentrates from India
are made into finished ink in mixing vessels by the targeted
addition of blends (binders containing no pigments), oils and
optionally additives (see Annexes 1A and 1B). >> Name of
product manufactured from the imported product: Printing ink for
offset package printing. >> End-use of imported product:
Production of print products
3215 11 00
3016635/2013
Printing ink, liquid, consisting of a New
dispersion of a rosin, maleated with ptert-butylphenol,
formaldehyde
and
pentaerythritoland and a modified
colophony, with carbon black and
including Tung oil, Linseed oil, soya
bean oil , fatty acid esters, containing by
weight not more than 25 % of carbon
black
UK
Applicant
ROUND 2014-07-01 how the component is to be used: This is a
colour printing ink for use in sheetfed offset printing, for use onto
paper and board. It is applicable for publication, commercial and
packaging printing on straight and perfecting presses.
3215 11 00
3016621/2013
Printing ink, liquid, consisting of a New
dispersion of a modified colophony and
carbon black and including alkyd resin
soya bean oil, fatty acid esters,
containing by weight not more than
25 % of carbon black
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used This is
a colour printing ink for use in sheetfed offset printing, for use onto
paper and board. It is applicable for publication, commercial and
packaging printing on straight and perfecting presses.
3215 19 00
3016665/2013
Printing ink, liquid, consisting of a New
dispersion of a rosin, maleated with ptert-butylphenol,
formaldehyde
and
pentaerythritoland and a modified
colophony, with colour pigment and
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used This is
a colour printing ink for use in sheetfed offset printing, for use onto
paper and board. It is applicable for publication, commercial and
packaging printing on straight and perfecting presses.
21 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
including Tung oil, Linseed oil, soya
bean oil, fatty acid esters, containing by
weight not more than 19 % of colour
pigments
3215 19 00
3016600/2013
Printing ink, liquid, consisting of a New
dispersion of a modified colophony and
colour pigment and including soya bean
oil, fatty acid esters, containing by
weight not more than 19 % of colour
pigments
UK
Applicant
ROUND 2014-07-01: >> how the component is to be used <<
This is a colour printing ink for use in sheetfed offset printing, for
use onto paper and board. It is applicable for publication,
commercial and packaging printing on straight and perfecting
presses
3405 90 90
3045298/2013
Polishing preparation in the form of an New
aqueous suspension containing:
— less than 10 % of cerium oxide by
weight (CAS RN 1306-38-3)
— less than 0.1 % of an acrylate
polymer by weight
[suitable for use as an abrasive in the
manufacturing of semiconductors]
DE
Applicant
ROUND 2014-07-01 >> Description of function: Frictional
emulsion used to remove layers from semiconductor wafers
during CMP (chemical mechanical polishing). See the attached
product description. >> Intended use of the imported product:
Frictional emulsion used in the manufacturing of semiconductor
wafers. >> Name of product manufactured from the imported
product: Various semiconductor circuits on wafers
ex 3707 10 00 40
3420/06
Sensitising emulsion, containing:
Am.
— not more than 10 % by weight of
naphthoquinonediazide esters,
— 2 % or more but not more than 20 %
by weight of copolymers of
hydroxystyrene
— not more than 7 % by weight of
epoxy-containing derivatives
dissolved in 1-ethoxy-2-propyl acetate
and/or ethyl lactate
BE
Applicant
ROUND 2014-07-01: A request to amend the existing text
description as follows: Sensitising emulsion, containing: not
more than 10 % by weight of naphthoquinonediazide esters, - 2
% or more but not more than 35 % by weight of copolymers of
hydroxystyrene not more than 7 % by weight of epoxycontaining derivatives dissolved in 1-ethoxy-2-propyl acetate
and/or ethyl lactate >>BREAK 2014-07-01 trade name : MFR
resist
3707 90 20
3058734/2013
Carrier in powder form, consisting of:
New
— Ferrite Iron oxide
— Manganese oxide
— Magnesium oxide
— Styrene acrylate copolymer
to be mixed with the toner powder, in
the manufacturing ofink/toner filled
bottles or cartridges for facsimile
machines, computer printers and
copiers
FR
Applicant
ROUND 2014-07-01 import powder called “carrier”, to be mixed
with a powder called “toner”, then it’s bottling. The bottles are
capped labeled and packaged. And sold under the name of
“Toner kit”. This carrier, under form of fine powder and mixed with
toner powder, facilitates the transport of the ink to the
photoconductor drum. The transfer is made by electrostatic
charge exchange on a photoconductor drum and then transferred
to the sheet of paper. The whole is fixed in a furnace at high
temperature
3707 90 90
3070384/2013
Polymer consisting of a polycondensate New
of
formaldehyde
and
naphthalenediol,chemically modified by
reaction with an alkyn halide, dissolved
BE
Applicant
ROUND 2014-07-01 >> Intended use of the imported product:
This product is a special polymer with a high degree of aromaticity
and some alkyne groups. Therefore it is resistant to etching and
can be used as planarization layer in photolithography , process
22 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
in propyleneglycol methylether acetate
Public Comments
used during the manufacturing of integrated circuits. An integrated
circuit is manufactured by the succession of lithographic steps. By
irradiation of photo-resists (varnishes that react upon irradiation)
and after development a well defined pattern is obtained (...) >>
type of product in which it is to be incorporated: these products
are used in the manufacturing of chips or integrated circuits for
the construction of microelectronic equipment used in different
sectors as household, automotive, medical, chemical…
3808 92 90
3093522/2013
Preparation containing by weight:
New
— 25 % or more but not more than
50 % of Zinc pyrithione
— Less than 10 % of sodium
polynaphthalene sulphonate
— 0,1 % or more but not more than
1 % of 1,3-Bis(hydroxymethyl)-5,5dimethylimidazolidine-2,4-dione
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: These
are highly active broad spectrum anti-microbial agents used as
fungicide-algaecide to selectively destroy & control of harmful
microbes in the area of hair & skin products & industrial product
applications
>> the manufacturing process being used:
Dispersion & aqueous dispersion >> what the finished product is:
Hair & skin products, paints & building products
3811 21 00
451692/2013
Additives for lubricating oils, which is a Am.
dispersant viscosity modifier consisting
of:
— a dispersant polymethacrylate which
is methacrylate ester copolymer with
alkyl groups of 8 to 18 carbons, the
copolymer
further
containing
methacrylic amides or esters with
nitrogen functional groups,
— [containing] mineral oils,
— with a nitrogen analysis ( % N by
weight) of more than 0,1 % but not
more than 0,3 %, and a sulfur
content of more than 0,1 % but not
more than 0,35 %,
— the polymer having a weight
average molecular weight (Mw) of
more than 10 000 but not more than
20 000,
used as an additive for the manufacture
of performance enhanced lubricants
such as gear oils and transmission fluids
through a blending process
(1)
FR
Applicant
ROUND 2014-07-01 Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product is a
methacryate
ester
copolymer
with
the
aminopropylmethacrylamide monomer, with random repeating
units (...) In the mixture of copolymers, some polymer molecules
may be simply ester, i.e. lacking the nitrogen monomer units. The
product has been developed as a dispersant viscosity modifier
blend for lubricants, especially useful for gear oils. It imparts
dispersancy and viscosity improvements to the lubricants. It has a
liquid form at room temperature and is imported into the EU in
drums and bulk.
3811 21 00
452610/2013
New text proposal:
FR
Applicant
ROUND 2014-07-01 Roll over from previous round due to a late
text amendment ROUND 2014-01-01 The product, a zinc salt of a
di(dodecylphenyl) dithiophosphoric acid, post-treated with
triphenyl phosphite to consume active sulphur. Oil is present in
the product. The product is an antioxidant/ antiwear agent in
Am.
Additives for lubricating oils,containing:
— Zinc
O,O-di(dodecylphenyl)
dithiophosphate (CAS RN 1105923 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
65-7),
— Triphenyl thiophosphate (CAS RN
597-82-0),
— mineral oils,
used as a concentrated additive for the
manufacture of performance enhanced
driveline fluids such as transmission
fluids and wet-brake fluids through a
blending process
Public Comments
lubricants mainly for off-highway equipment-driveline applications
such as transmissions, wet brakes and final drive axles.
Additives for lubricating oils,
— consisting
of
Zinc
O,Odi(dodecylphenyl) dithiophosphate
(CAS RN 11059-65-7),
— containing triphenyl thiophosphate
(CAS RN 597-82-0),
— containing mineral oils,
used as a concentrated additive for the
manufacture of performance enhanced
driveline fluids such as transmission
fluids and wet-brake fluids through a
blending process
(1)
3811 21 00
452817/2013
Additives for lubricating oils:
Am.
— consisting
of
a
borated
polyisobutylene
succinimide
[derived from reaction products of
polyethylenepolyamines
with
polyisobutenyl succinic anhydride
and boric acid](CAS RN 134758-955),
— containing mineral oils,
— with a chlorine content by weight of
0,1 % or more but not more than
0,5 %,
— with a total base number (TBN) of
more than 40,
used [in] as a concentrated additive for
the
manufacture
of
performance
enhanced
lubricants
[such
as
transmission fluids and gear oils through
a blending process]
(1)
FR
Applicant
ROUND 2014-07-01: Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product is a borated
polyolefin imide alkylene polyamine which is the reaction product
of a basic succinimide dispersant and boric acid. The reaction
product is a mixture (...) with some mineral oil as a diluent to
reduce the viscosity for ease of handling
3811 21 00
452265/2013
Additives for lubricating oils, consisting Am.
of:
FR
Applicant
ROUND 2014-07-01: Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product is a mixture of
dispersants specifically formulated for use in two stroke engine
24 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
— o-amino
polyisobutylenephenol
(CAS RN 78330-13-9),
— polyisobutylene
succinimide
[derived from reaction products of
polyethylenepolyamines
with
polyisobutenyl succinic anhydride]
(CAS RN 84605-20-9),
— alkenylimidazoline (CAS RN 6878417-8) [derived from the reaction of
isostearic
acid
and
tetraethylenepentamine],
— nonylated diphenylamine (oxidation
inhibitor) (CAS RN 36878-20-3 and
CAS RN 27177-41-9),
— mineral oils,
used in a concentrated additive for the
manufacture of performance enhancing
lubricants for two-stroke (or two cycle)
engine oils through a blending process
(1)
3811 21 00
452045/2013
new text:
Public Comments
lubricants. The lubricant in the fuel protects two stroke engines
from wear and harmful deposits, keeping them running smoothly
and thus minimizing emissions, power-loss and wasted fuel.
Am.
FR
Additives for lubricating oils and fluids:
— containing mineral oils,
— consisting of calcium salts of
reaction products of heptyl phenol
with formaldehyde (CAS RN 8460523-2) with a total base number
(TBN) of more than 40 but not more
than 100,
used as a concentrated additive in the
preparation of lubricating oils, metal
working fluids and in the production of
overbased calcium detergents for
engine oils through a blending process
Additives for lubricating oils and fluids,
containing mineral oils, consisting of
calcium salts of reaction products of
heptyl phenol with formaldehyde (CAS
RN 84605-23-2) with a total base
number (TBN) of more than 40 but not
more than 100, used as a concentrated
additive in the preparation of lubricating
oils, metal working fluids and in the
production of overbased calcium
detergents for engine oils through a
25 / 53
Applicant
ROUND 2014-07-01: Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product is a calcium
salt from heptylphenol reacted with formaldehyde and calcium
base. It is a sulphur free phenate. It contains mineral oils with
the active substance being calcium salts of reaction products of
heptyl phenol with formaldehyde (CAS RN 84605-23-2), the
mixture having a total base number (TBN) of more than 40 but not
more than 100. The product has a liquid form at room temperature
and is imported into the EU in drums and bulk
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
blending process
(1)
3811 21 00
454048/2013
Additives for lubricating oils:
Am.
— containing mainly an ethylenepropylene copolymer - succinic
anhydride
reacted
with
4-(4nitrophenylazo)aniline
and
3nitroaniline,
— containing mineral oils,
— with a nitrogen content [of] ( %N by
weight) of more than 0,2 % but not
more than 0,5 %,
used in a concentrated additive for the
manufacture of performance enhanced
lubricants such as diesel engine oils
through a blending process
(1)
FR
Applicant
ROUND 2014-07-01 Roll over from previous round due to a late
text amendment ROUND 2014-01-01 The product is a dispersant
viscosity modifier that is compatible with additive packages
(concentrates) for lubricants. The dispersant mixture is further
post-treated with small amount of dodecenyl succinic anhydride
to react with residual amino compounds to make
monosuccinimide structures. The product imparts dispersancy
and viscosity improvements to the lubricants and is particularly
useful to prevent soot thickening especially for diesel engine oils.
3811 21 00
452759/2013
New text proposal:
FR
Applicant
ROUND 2014-07-01: Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product is a dispersant
viscosity modifier that is compatible in additive packages
(concentrates) for lubricants and is especially useful for automatic
transmission fluids.
It imparts dispersancy and viscosity
improvements to the lubricants
Am.
Additives for lubricating oils containing:
— maleic anhydride styrene copolymer
esterified with C4-20 aliphatic
alcohols and in part amidated with
aminopropylmorpholine,
— mineral oils with a nitrogen content
( % N by weight) of more than
0,1 %, but not more than 0,3 %,
used in, or in combination with, a
concentrated
additive
for
the
manufacture of performance enhanced
lubricants
such
as
automatic
transmission fluids through a blending
process
Additives for lubricating oils,
— consisting of maleic anhydride
styrene copolymer esterified with
C4-20 aliphatic alcohols and in part
amidated
with
aminopropylmorpholine,
— containing mineral oils,
— with a nitrogen analysis of ( % N by
weight) of more than 0,1 %, but not
more than 0,3 %,
used in, or in combination with, a
26 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
concentrated
additive
for
the
manufacture of performance enhanced
lubricants
such
as
automatic
transmission fluids through a blending
process
(1)
3811 21 00
452839/2013
Additives for lubricating oils:
Am.
— based on magnesium C16-24
alkylbenzenesulphonates (CAS RN
71786-47-5), borated,
— containing mineral oils,
— having a tatal base number (TBN) of
more than 250, but not more than
350 and a boron content by weight
of more than 3 %, but not more than
4,5 %,
used as a concentrated additive for the
manufacture of lubricating oils such as
gear oils through a blending process
(1)
FR
Applicant
ROUND 2014-07-01 Roll over from previous round due to a late
text amendment. ROUND 2014-01-01 The product is a
magnesium sulfonate that is an over-based detergent, further
reacted with boric acid to make a soluble or dispersible borate
salt. The product has a liquid form at room temperature and is
imported into the EU in drums and bulk.
The material in a
lubricant helps to keep gears boxes and manual transmissions
clean and free for corrosive acids. It also serves as a surface
active corrosion inhibitor and antiwear agent
3811 21 00
451909/2013
Additives for lubricating oils, which are Am.
comprised of a blend of dispersant
viscosity modifiers and non-dispersant
viscosity modifiers:
— containing an ethylene-propylene
copolymer - succinic anhydride
reacted
with
4-(4nitrophenylazo)aniline
and
3nitroaniline,
— containing
a
dispersant
polymethacrylate
which
is
methacrylate ester copolymer with
alkyl groups of 8 to 18 carbons; the
copolymer
further
containing
methacrylic amides or esters with
nitrogen functional groups,
— containing an ethylene-propylene
copolymer (CAS RN 9010-79-1),
— containing mineral oils and optional
pour point depressant polymer,
— with a nitrogen content [of]( %N by
weight) of more than 0,1 %, but not
more than 0,3 %,
used as an additive for the manufacture
of performance enhanced lubricants
such as gear oils through a blending
FR
Applicant
ROUND 2014-07-01: Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product is a dispersant
viscosity modifier blend for lubricants especially useful for gear
oils. It imparts dispersancy and viscosity improvements to the
lubricants.
For the purpose of convenience and to coordinate
the dossier, this product has been identified and labelled “SVM”
which is simply a file acronym. In the EU the blend is used in
conjunction with other additives to make finished lubricants, such
as gear oils and transmission fluids. It is blended by the
applicant’s customers, typically an oil company, with other
performance additives and oil to produce a finished lubricant.
27 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
process
(1)
3811 21 00
452424/2013
Additives for lubricating fluids consisting Am.
of:
— sulphurized diisobutylene (CAS RN
68515-88-8),
— [a] calcium sulphonate,
— an amount of polyisobutylene amino
alkyl succinate,
— with polyisobutylene amino alkyl
succinate and calcium sulfonate
present at a total of more than 0,5 %
and not more than 5 % by weight,
used as a concentrated additive in the
preparation of metal working fluids
through a blending process
FR
Applicant
ROUND 2014-07-01 Roll over from previous round due to a late
text amendment ROUND 2014-01-01 The product is an olefin
sulphide, (sulfurized diisobutylene) in combination surfactants, a
calcium sulfonate and ashless nitrogen containing co-surfactant. It
is used as a concentrated additive in the preparation of metal
working fluids through a blending process. The surfactants help
to control odour as well as serving other functions
(1)
3811 29 00
454951/2013
Tetrahydrothiophene 1,1-dioxide, 3-(C9- Am.
11-isoalkyloxy) derivates, C10-rich (CAS
398141-87-2), used in the manufacture
of lubricant additive concentrates
through a blending process
(1)
FR
Applicant
ROUND 2014-01-01: The material, an alkoxysulfolane, is a seal
swell agent used primarily in automatic transmission fluids. The
product has a liquid form at room temperature
3811 29 00
452903/2013
Additives for lubricating oils, consisting Am.
of dialkyl phosphite with alkyl groups
composed of a mix of:
— C 18 monounsaturated, and
— C 18 and C 16 saturated
being a concentrated antioxidant, friction
modifier and anti-wear agent used
primarily in the preparation of lubricants
such as gear oils and transmission fluids
through a blending process
(1)
FR
Applicant
ROUND 2014-07-01: Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product consists of
dialkyl phosphite typically of more than 90% by weight, with alkyl
groups composed of a mix of: - C 18 monounsaturated, and - C
18 and C 16 saturated. The product has a semi-solid form at room
temperature
3811 29 00
452865/2013
Additives for lubricating oils:
Am.
— consisting of a C14-18 alpha-olefin
epoxide, boric acid reaction product,
— composed of more than 90 % by
weight of borate esters which are a
mixture of oligomeric borates and
cyclic borates, such as 2-hydroxy4-tetradecyl-1,3,2-dioxaborolane
FR
Applicant
ROUND 2014-07-01: Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product is an alkyl
borate mixture reaction product of an epoxide and boric acid
containing more than 90% by weight of borate esters which are a
mixture of oligomeric borates and cyclic borates such as 2hydroxy-4-tetradecyl-1,3,2-dioxaborolane (CAS RN 84819-41-0)
28 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
(CAS RN 84819-41-0),
used as a concentrated additive friction
modifier and anti-wear agent in the
preparation of lubricants such as
transmission fluids, gear oils and
hydraulic fluids through a blending
process
(1)
3811 29 00
452962/2013
Mixture consisting of:
Am.
— 2,5-bis(tert-nonyldithio)-[1,3,4]thiadiazole (CAS RN 89347-09-1)
with a purity by weight of 85 % or
more, and
— not more than 15 % by weight of 5[(7-methyloctyl)disulphanyl]-1,3,4thiadiazole-2(3H)-thione (CAS RN
97503-12-3)
used in the manufacture of lubricant
additive
concentrates
through
a
blending process
(1)
FR
Applicant
ROUND 2014-01-01: This material is a corrosion inhibitor
especially for copper containing metals. It also serves as an
antiwear agent or extreme pressure agent, odour controller and
oxidation inhibitor. Its purpose is to prevent wear, odour,
degradation of the lubricants and destruction of machinery such
as gears
ex 3811 29 00 20
335395/2012
Additives for lubricating oils, consisting Am.
of
reaction
products
of
bis(2methylpentan-2-yl)dithiophosphoric acid
with propylene oxide, phosphorus oxide,
and amines with C12-14 alkyl chains,
used as a concentrated additive for the
manufacture of engine oils through a
blending process
FR
Applicant
ROUND 2014-07-01: Request for amending the existing text
description as follows: Additives for lubricating oils, consisting of
reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid
with propylene oxide, phosphorus oxide, and amines with C12-14
alkyl chains, used as a concentrated additive for the manufacture
of lubricating oils through a blending process. >>BREAK 201407-01 Extreme pressure agent primarily used in gear oils
ex 3811 29 00 40
335281/2012
Additives for lubricating oils, consisting Am.
of reaction products of 2-methyl-prop-1ene with sulphur monochloride and
sodium sulphide (CAS RN 68511-50-2),
with a chlorine content by weight of
0,05 % or more but not more than
0,5 %, used as a concentrated additive
for the manufacture of engine oils
through a blending process
FR
Applicant
ROUND 2014-07-01: Request for amendment of the existing text
description as follows: Additives for lubricating oils, consisting of
reaction products of 2-methyl-prop-1-ene
with sulphur
monochloride and sodium sulphide (CAS Nr 68511-50-2), with a
chlorine content by weight of 0.01% or more but not more than
0.5 %, used as a concentrated additive for the manufacture of
lubricating oils through a blending process. >>BREAK 2014-0701 Extreme pressure agent for use in performance enhancing oil
additives
ex 3812 30 80 75
1095078/2012
N,N'-Bis(1,2,2,6,6-pentamethyl-4Am.
piperidinyl)-1,6-hexanediamine, polymer
with
2,4-dichloro-6-(4-morpholinyl)1,3,5-triazine (CAS RN 193098-40-7)
IT
NL
Applicant
Applicant
ROUND 2014-07-01: objection ROUND 2013-07-01: Product is
incorporated into plastics (e.g. polyolefins, polyamides,
polyesters, etc.) It functions as a light stabilizer and protect the
plastics from the deleterious effects of UV light when articles are
in service outdoors or exposed to the sun.
29 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
3815 19 90
3037338/2013
Catalyst containing by weight of
New
— 52 % (+/- 10 %) of Cuprous Oxide
(CAS RN 1317-39-1),
— 38 % (+/- 10 %) of Cupric Oxide
(CAS RN 1317-38-0) and
— 10 % (+/- 5 %) of Metallic Copper
(CAS RN 7440-50-8)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used to make
copper oxide used in many industrial processes >> the
manufacturing process being used used in a reaction process to
create a a di-mono-chlorsilane mixture >> what the finished
product is Copper oxide
3820 00 00
3007643/2013
Feedstock consisting of by weight:
New
— 88 % or more but not more than
92 % of Ethanol,
— 2,2 % or more but not more than
2,7 % of Monoethylene glycol,
— 1,0 % but not more than 1,3 % of
Methylethylketone,
— 0.36 % or more but not more than
0,40 %
of
anionic
surfactant
(ca. 30 % active),
— 0.0293 % or more but not more than
0,0396 % of methyl isopropylketone,
— 0.0195 % or more but not more than
0.0264 % of 5 methyl-3-heptanone,
— 10 ppm or more but not more than
12 ppm of Denatonium Benzoate
(Bitrex),
— < 0.01 Perfumes,
— 6,5 - 8,0 water
UK
Applicant
ROUND 2014-07-01: >> how the component is to be used: To
produce a screenwash cleansing agent (in concentrate form). The
fully formulated cleaning agent will then be diluted with water to
reach the required antifreeze performance level
>> the
manufacturing process being used: The manufacturing in the EU
involves a precise and technically challenging blending process,
which takes place within highly specialist purpose-built facilities.
Mass-volume pump controlled tanks equipped with nitrogen
blowing and circulating systems are used to blend and process
various sequential chemical and additive additions into the
feedstock, some of which require partial heating. (...) >> what the
finished product is: Screenwash/antifreeze
3824 90 97
3093564/2013
1,3-Benzenedimethanamine,N-(2New
phenylethyl)
derivatives
(1,3benzenedimethanamine,
reaction
product with styrene) / CAS RN 40436222-7
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: ### is
an epoxy resin curing agent made from MXDA which make it
exhibit specifically unique properties >> the manufacturing
process being used: >>> ### is blended with other di-amine
compounds in varying proportions to produce different grades of
epoxy hardener to suit individual requirements. >>> In summary,
### provides enhanced corrosion resistance to sulphuric acid and
other reactive or degradation products so it can be used in the
following areas: Linings, (especially in sewerage systems);
Protective Coatings (for example in chemical tankers); Floor
Coatings and Adhesives in Civil Engineering applications
3824 90 97
3093511/2013
Aqueous dispersion, containing by New
weight:
— 57 % or more but not more than
63 %
of
aluminium
oxide
(CAS RN 1344-28-1)
— 37 % or more but not more than
42 %
of
titanium
dioxide
(CAS RN 13463-67-7), and
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: As a
colour pigment in the production of cosmetics
>> the
manufacturing process being used: This is a colour pigment in
cosmetic manufacturing, the process is colorants are coated onto
a special platelet alumina and then surface treated to improve
skin adhesion and water resistance while bonding the colorant to
the substrate. >> what the finished product is Cosmetic products
30 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
— 1 % or more but not more than 2 %
of
triethoxycaprylyl
silane
(CAS RN 2943-75)
3824 90 97
455068/2013
New text proposal:
Am.
FR
Applicant
ROUND 2014-07-01: Roll over from previous round due to a late
text amendment ROUND 2014-01-01: The product, a mixed
phosphate ester acids derived from the reaction of phosphoric
anhydride (P2O5) with a mixture of tertiary-amylphenol and a
polymeric polyol (styrene/allyl alcohol copolymer) in xylene
solvent. The aromatic solvent (xylene) is removed by stripping
and replaced by isobutyl alcohol to ~ 30-35% by weight of the
isobutyl alcohol. The product has a liquid form at room
temperature
Additives for coatings for metals,
consisting of mixed alkyl phosphoric
ester
acids
[derived
from
the
simultaneous reaction of phosphoric
anhydride with an alkylphenol and
polymeric polyols] (CAS RN 84605-276), containing by weight 30 % or more
but no more than 35 % isobutyl alcohol
used as solvent
Additives for coatings for metals,
consisting of mixed alkyl phosphoric
ester
acids,
derived
from
the
simultaneous reaction of phosphoric
anhydride with an alkylphenol and
polymeric polyols (CAS RN 84605-276), containing 30 % to 35 % isobutyl
alcohol used as solvent
3824 90 97
3016831/2013
Preparation containing by weight;
New
— 95 % or more of allyl methacrylate
(CAS RN 96-05-9)
— Not more than 1 % of 4-methoxyphenol (CAS RN 150-76-5)
— Not more than 1 % of allyl alcohol
(CAS RN 107-18-6)
— Not more than 1 % of 2-methacrylic
acid (CAS RN 79-41-4)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used for use
in coatings, composite, adhesive and sealant systems that cure
via a free radical mechanism >> the manufacturing process being
used Allyl methacrylate and isomers are consumed in reaction.
This produces a further raw material Y-11136 which is then
distilled to produce Silquest A-174NT, a methacryloxy functional
trimethoxy silane for use in coatings, composite, adhesive and
sealant systems that cure via a free radical mechanism >> what
the finished product is coatings, composite, adhesive and sealant
systems
3824 90 97
3041921/2013
(S)-α-hydroxy-3-phenoxyNew
benzeneacetonitrile (CAS RN 61826-764) with addition of 10 % by weight or
more, but not more than 20 % by weight
of toluene
AT
Applicant
ROUND 2014-07-01 >> Used for the production of an insecticide
>> The toluene was added to reduce the viscosity of the product
and to facilitate handling
ex 3824 90 97 18
1231/2008
Poly(tetramethylene glycol) bis[(9-oxo- Am.
9H-thioxanthen-1-yloxy)acetate] with an
average polymer chain length of less
than 5 monomer units (CAS RN
UK
Applicant
ROUND 2014-07-01:The CAS RN will be corrected. It should be
CAS RN 813452-37-8
>>BREAK 2014-07-01 Prolongation
Exercise 1/1/2014, Extention 1 year ROUND 1/7/2013: change
of the TARIC code from 38249097 75 to 38249097 18
31 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
515136-48-8)
3826 00 90
3093028/2013
C6-24 and C16-18-unsaturated fatty New
acid esters with sucrose (sucrose
polysoyate) / CAS RN 93571-82-5
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used used as
a thinner >> the manufacturing process being used
Polymerisation >> what the finished product is Coating resin
3901 10 10
3081309/2013
Linear polyethylene with a gravity of not New
more than 0,94, with following
parameters:
— Linear low-density polyethylene
(LLDPE) Copolymer
— A melt flow rate of 1,8 dg/min or
more, but no more than 3,2 dg/min
— Density of 916 kg/m³ or more, but
not more than 920 kg/m³
— Not more than 15 % of Butene
PL
Applicant
ROUND 2014-07-01 >> Imported product: LLDPE C4 copolymer
in the form of pellets (granules). Linear low-density polyethylene
(LLDPE) is a substantially linear polymer (polyethylene), with
significant numbers of short branches, commonly made by
copolymerization of ethylene with longer-chain olefins. Linear lowdensity polyethylene differs structurally from conventional lowdensity polyethylene (LDPE) because of the absence of long
chain branching >> Intended use of the imported product The
product is processed by cast film extrusion. The cast film process
involves the extrusion of polymers melted through a slot or flat
dies to form a thin, molten sheet or film. This film is "pinned" to the
surface of a chill roll (typically water-cooled and chrome-plated) by
a blast of air from an air knife or vacuum box. The film quenches
immediately and then has its edges slit prior to winding.
3901 10 10
3009357/2013
Linear polyethylene having a specific New
gravity of less than 0,94 - and has the
following features:
— linear
low-density
polyethylene
(LLDPE) copolymer granulate
— a melt flow rate of 15 or more, but
no more than 60
— density of 0,924 or more, but no
more than 0,928
— not more than 8 % of butene
— physical form : pellets
— well suited for use in filled
compounds due to high MFR/good
flow
EL
Applicant
> 10.09.2013 - EL(mail): product transformd by the compounding
technology into masterbatches (concentrates of pigments &
additives into a polymer carrier) which are used as raw materials
for coloring and improving the properties of all kinds of plastic
products
3901 10 10
3901 90 90
3045217/2013
Lineares Polyethylene niedriger Dichte New
(LLDPE) in Pulver- oder Granulatform,
mit
— ausschließlich
Buten
als
Comonomer
und
einem
Comonomergehalt von nicht mehr
als 9 GHT,
— einer
Schmelzflussrate
nach
ISO 1133
(MFR, 190 °C, 2,16 kg)
von 20 g/10 min und
DE
Applicant
ROUND 2014-07-01 >> Mode of operation: Polymeric carrier for
producing masterbatches in the plastics industry. The combination
of the polymeric carrier and the high-quality pigments results in
masterbatch. >> Intended use: For the production of masterbatch
(high-concentration pigment and additive formulations on a
polymer matrix) required to dye plastic compounds. The
combination of the polymeric carrier and the high-quality pigments
results in masterbatch. >> End-use of imported product: Use as a
polymeric carrier for masterbatches (semifinished products
processed in the plastics industry).
32 / 53
28/10/2013
CN code
TARIC
Ref Mail
new or
am.
Description
— einer
Dichte
DIN EN ISO 1183 von 0,924
Cntr
Position
Public Comments
nach
3901 10 10
3090750/2013
Linear
low-density
polyethylene New
(LLDPE) copolymer, having:
— a melt flow rate of 0,4 or more, but
no more than 0,6
— a density of 916 or more, but no
more than 920
— a specific gravity of less than 0,94
— not more than 12 % of butene
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: Linear
low density polyethylene for Blown film >> the manufacturing
process being used: Blown Film Extrusion
3901 10 10
3009393/2013
Linear polyethylene having a specific New
gravity of less than 0,94 - and has the
following features:
— linear
low-density
polyethylene
(LLDPE) copolymer granulate
— a melt flow rate of 0,4 or more, but
no more than 1,2
— density of 0,916 or more, but no
more than 0,928
— not more than 12 % of butene
— physical form: pellets
EL
Applicant
ROUND 2014-07-01: Our company transforms the product
(LLDPE) by the blown-film technology into plastic films for
agricultural applications, by pipe extrusion into pipes for irrigation
and water supply and by the compounding process into
masterbatches (color and additive concentrates used as raw
materials by the plastics industry)
3901 10 10
3061934/2013
Polyethylene, in the form of granules, of New
a specific gravity of 0,918 (± 0,002), a
melt flow index of 0,5 g/10 min
(± 0,05 g/10 min), for the manufacture of
blown films of a haze value not more
than 13 % and an elongation at break
(MD/TD) of 550/800
(1)
FR
Applicant
ROUND 2014-07-01 Polyethylene film produced by blowing
extrusion
3901 10 10
3062514/2013
Linear
low
density
polyethylene New
(LLDPE) in the form of granules, with a
density of 0.90 or more, but not more
than
0,94,
with
the
following
characteristics:
— fluidity index greater than 0,9 but
less than 2,
— relative viscosity greater than or
equal to 1,44,
— butene rate less than or equal to
6 %,
used in the manufacture of plastic films
by blown film extrusion
FR
Applicant
ROUND 2014-07-01 >> Linear low density polyethylene (LLDPE)
c4 >> This product is used for manufacturing film by blown film
extrusion or cast film extrusion. >> It is used to make carrier bags,
dustbin bags, freezer bags, other bags, protective films,
agricultural films and certain types of packaging films.
33 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
3901 10 10
3009379/2013
The product falls within CN Code 3901 New
10 10 – linear polyethylene having a
specific gravity of less than 0,94 – and
has the following features:
— linear
low-density
polyethylene
(LLDPE) copolymer granulate
— a melt flow rate of 15 or more, but
no more than 60
— density of 0,924 or more, but no
more than 0,928
— not more than 8 % of butene
— physical form : reactor powder,
makes it extremely suitable for
masterbatch production (excellent
dispersion)
— well suited for use in filled
compounds due to high MFR/good
flow
EL
Applicant
ROUND 2014-07-01 product to be transformed by the
compounding technology into masterbatches (concentrates of
pigments & additives into a polymer carrier) which are used as
raw materials for coloring and improving the properties of all kinds
of plastic products
3901 10 10
3009459/2013
Linear polyethylene having a specific New
gravity of less than 0,94 – and has the
following features:
— linear
low-density
polyethylene
(LLDPE) Copolymer
— a melt flow rate of 1,8 (dg/min) or
more, but no more than 3,2 (dg/min)
— density of 916 (kg/m³) or more, but
no more than 920 (kg/m³)
— not more than 15 % of Butene
EL
Applicant
ROUND 2014-07-01 >> Imported product: LLDPE C4 copolymer
in the form of pellets (granules). >> Intended use of the imported
product The product is processed by cast film extrusion >> End
use of the imported product Stretch film is a high elongation,
polyethylene based film that is used to unitize and protect
products during storage and shipment. In other words the Stretch
film used to unitize a number of small, individual items into larger
unit loads (normally on a pallet) Stretch film used as primary
packaging material for protecting individual products, usually in
combination with other packaging materials.
3901 10 90
3093709/2013
C6 co-monomer polyethylene
New
— containing not more than 95 % by
weight of ethylene, and
— not more than 5 % of hexene,
— of a specific gravity of not more than
0,93
manufactured using a metallocene
catalytic process
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: ### is
used in a wide variety of maufacturing applications: flexible
packaging material environments, pipes, rotational mouldings,
numerous equipment products, tanks (both for chemical and
water) >> any trade name for it: ### describes an Polyethylene
product in the registry but does not separately differentiate the
manufacturing process which makes it act differently from
conventional LDPE. The product has been specifically designed
to exhibit certain unique properties as described in this application
and attachments. >> what the finished product is Flexible packing
materials, pipes, mouldings
3905 99 90
3093646/2013
Poly (vinyl acetate phthalate) whether or New
not blended with titanium dioxide (CAS
RN ?)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used:
Pharmaceutical aid (coating agent) >> the manufacturing process
being used Bleding with other raw materials to make a
pharmaceutical dispersion >> what the finished product is
Pharmaceutical products
34 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
3906 90 90
3045407/2013
Aqueous solution of polymers and New
ammonia with the following composition:
— Ammonia (CAS RN 1336-21-6):
maximum 0.5 % by weight;
— polycarboxylate (linear polymers of
acrylic acid): minimum 0.3 % but no
more than 10 % by weight
[suitable for use in the chemical
mechanical
polishing
(CMP)
of
semiconductors]
DE
Applicant
ROUND 2014-07-01 >> Description of function: Polymer additive
used to remove layers from semiconductor wafers during the
chemical mechanical polishing (CMP) of semiconductors. >>
Intended use of the imported product: Frictional emulsion used in
the manufacturing of semiconductor wafers. >> Name of product
manufactured from the imported product: Various semiconductor
circuits on wafers
3907 20 20
3016815/2013
Poly(propylene glycol) (CAS RN 25322- New
69-4)
UK
Applicant
ROUND 2014-07-01: >> how the component is to be used used in
the production of Silylated Polyurethane Resins
>> the
manufacturing process being used Blending >> what the finished
product is sealants and adhesives mainly in the construction
industry
ex 3907 30 00 60
323377/2012
Polyglycerol polyglycidyl
(CAS RN 105521-63-9)
ether resin Am.
FR
Applicant
ROUND 2014-07-01: Request to modify the CAS RN to 11854988-5 >>BREAK 2014-07-01
Adhesion promoter for fibre
preparation
3907 60 80
3016740/2013
Oxygen
binding
copolymer
(as New
determined by the ASTM D 1434
and 3985 methods), obtained from
benzenedicarboxylic acids, ethylene
glycol and polybutadiene substituted by
hydroxy groups
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used As a
polyester oxygen scavenger concentrate that enhances the
oxygen barrier properties of polyethylene terephthalate (PET).
>> the manufacturing process being used Reaction with water &
oxygen >> what the finished product is Bottled drinks industry
ex 3910 00 00 40
859/06
Biocompatible
silicones
for
the Am.
manufacture of long term surgical
implants
(1)
FR
Applicant
ROUND 2014-07-01: A request for deletion of the end-use
requirement. >>BREAK 2014-07-01 trade names : MED-### part
A and part B
3919 90 00
3070491/2013
Self-adhesive plastic film consisting of:
New
— a poly(olefin) layer with a thickness
of more than 95 but not more than
110 microns
— an adhesive layer with a thickness
of more than 5 but not more than
15 microns
— a layer based on epoxy resin,
having a thickness of more than
4 but not more than 100 microns
— a liner consisting of poly(ethylene
terephtalate) with a thickness of
more than 35 but not more than
40 microns
BE
Applicant
ROUND 2014-07-01 >> Dimensions: rolls >> Packaging: Material enters in 20 'containers >> Usage: For fixing IC chips to a
lead frame, interposer or chip to chip in the semiconductor
assembly process >> Function of the DAF tape: It realizes high
adhesive reliability/stability between chip to chip, COB (chip on
board) and stacked CSP (chip scale packaging) manufacturing
processes. This material is embedded into the final package and
stays with the package during its total lifetime, therefore it's
considered as an A-material.
35 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
3921 90 10
3070446/2013
Multilayer film consisting of:
New
— a white poly(ethylene terephthalate)
film with a thickness between
100 µm and 150 µm [and a surface
roughness between 0,5 µm up to 1
µm],
— a primer of brown phenolic material
with a thickness between 8 µm and
15 µm,
— an adhesive layer of a synthetic
rubber with a thickness between
20 µm and 30 µm,
— and a transparent poly(ethylene
terephthalate) liner with a thickness
between 35 µm and 40 µm
BE
Applicant
ROUND 2014-07-01 >> Dimensions: rolls of 450 m of various
widths >> Packaging: - Material enters 20 'containers >> Usage:
For making of barcode labels for tyre industry >> Function of the
barcode label: >>> The bar code label has the intention to ensure
the traceability during the production of the tire. Each barcode
label is printed with a unique reference, a barcode. At each step in
the production process, this reference will regularly be scanned,
and the data recorded in a central computer system at the tire
manufacturer.
3926 90 97
3082385/2013
Knob of car radio front panelmade of New
Bisphenol
A-based
polycarbonate
through simultaneous injection moulding
from components of various colours
HU
Applicant
ROUND 2014-07-01 The product is an injection moulded plastic
part produced by a third-country manufacturer using a special
injection moulding method. The third-country manufacturer
produces the parts through the simultaneous injection moulding of
two plastic components using a rotating table
4107 12 91
3087111/2013
[Water] buffalo leather, grain splits
New
NL
AT
Applicant
Opposed
ROUND 2014-07-01 >> Mode of operation: The grain splits semifinished buffalo leather gets a colour effect and protection and is
processed into upholstery leather
4107 12 91
3087091/2013
Bovine leather, grain splits
New
NL
AT
Applicant
Opposed
ROUND 2014-07-01 >> Mode of operation: The grain splits semifinished bovine leather gets imprinted, colour effect and protection
and is processed into upholstery leather. >> Type of product in
which it is to be incorporated: upholstery leather (direct ready for
production of furniture)
5403 31 00
3081152/2013
Viscose yarns:
New
— untwisted or with a twist not
exceeding 120 turns per metre,
— consist of continuous, free of knots
yarn;
— rolled into coins of weight of not less
than 2.5 kg,
— made in a continuous manufacturing
process,
for use for manufacturing of lining
fabrics
LT
Applicant
ROUND 2014-07-01 Viscose yarns ### are produced during the
continuous manufacturing process, which makes continuous yarn
on coins, which weight not less than 2.5 kg. Meanwhile yarns
produced in centrifugal (not continuous) way are re-winded from
small yarn lengths into 2 kg weight coins
5504 10 90
3081287/2013
Fire retardant viscose fiber
PL
Applicant
ROUND 2014-07-01 Fire retardant viscose fiber is used for
New
36 / 53
28/10/2013
CN code
TARIC
ex 5603 12 90 60
ex 5603 13 90 60
Ref Mail
459/11/1999
Description
new or
am.
Non-woven
of
spunbonded Am.
polyethylene, of a weight of more than
60 g/m2 but not more than 80 g/m2 and
an air resistance (Gurley) of 8 seconds
or more but not more than 36 seconds
(as determined by the ISO 5636/5
method)"--- suggested amendment /
Sep 2013 (UK) ---
Cntr
Position
Public Comments
AT
Opposed
production of fire retardant viscose wadding used for production of
mattresses
UK
BE
Applicant
Co-applicant
ROUND 2014-07-01: Amending request "Non-woven of
spunbonded polyethylene, of a weight of more than 60 g/m2 but
not more than 80 g/m2 and an air resistance (Gurley) of 8
seconds or more but not more than 36 seconds (as determined by
the ISO 5636/5 method)" Prolongation Exercise 1/1/2014
Non-woven
of
spunbonded
polyethylene, of a weight of more than
60 g/m2 but not more than 80 g/m2 and
an air resistance (Gurley) of 8 s or more
but not more than 36 s (as determined
by the ISO 5636/5 method)
--- previous version ---
5603 93 90
3045458/2013
Nonwovens made of polyester fibres,
New
— with a basic weight of 85 g/m2,
— with a constant thickness of
approximately 95 µm,
— neither brushed nor covered,
— in 1 m wide rolls of 2 000 to 5 000 m
length,
suitable for the coating of membranes in
the manufacture of osmosis and reverse
osmosis filters
DE
Applicant
ROUND 2014-07-01 >> Commercial name: Non-woven >>
Intended use of the imported product: for membrane coatings
(polysulfone layer topped with a polyamide layer). >> in terms of
quality, the fibres must be distributed evenly to ensure that the
thickness of the fabric remains constant at around 95 µm, allowing
for air permeability of 0.5-0.9 cm³/cm²/sec. Note that the polyester
fleece in question is a material intended for use only in osmosis
and reverse osmosis filters. The exact specification is attached to
the application. >> End use: Osmosis filters for reverse osmosis.
6909 19 00
3007257/2013
Small ceramic balls, called ceramic New
proppants
DK
Applicant
ROUND 2014-07-01: The product will be coated and then it is
named coated proppant. The coated product is used in the oiland gas extraction. Known as hydraulic fracturing
HU
AT
Applicant
ROUND 2014-07-01: A request of amending the existing text
description as follows: Ceramic heat sinks, containing by weight:
- 66% or more of silicon carbide, - 10% or more of aluminium
oxide for maintaining the operating temperature of transistors,
diodes and integrated circuits in products of headings 8521 or
8528 >> BREAK 2014-07-01 Proposal for 1/1/2014 round:
Amended description: Ceramic heat sinks, containing by weight: 66 % or more of silicon carbide, -15 % or more of aluminium
The
ceramic
proppant
contains
aluminum oxide, silicon oxide and iron
oxide
ex 6909 19 00 80
277054/2011
Ceramic heat sinks, containing by Am.
weight:
— 66 % or more of silicon carbide,
— 15 % or more of aluminium oxide
for
maintaining
the
operating
temperature of transistors, diodes and
integrated circuits in products of
headings 8521 and 8528
37 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
(1)
Public Comments
oxide for maintaining the operating temperature of transistors,
diodes and integrated circuits in products of headings 8521 or
8528 Hungarian version: Kerámia hűtőborda, amely tartalmaz: legalább 66 tömegszázalék szilícium-karbidot,
-legalább 15
tömegszázalék alumíniumoxidot, a 8521 vagy a 8528 vtsz. alá
tartozó termékekben lévő tranzisztorok, diódák és integrált
áramkörök üzemi hőmérsékletének fenntartásához
7601 20 20
3051104/2013
Rough cast extrusion bars and extrusion New
billets of aluminium alloys corresponding
to DIN-EN-AW-7050 and DIN-EN-AW7055
DE
Applicant
ROUND 2014-07-01 >> Commercial name: Extrusion billets,
aluminium alloys DIN-EN AW-7055, DIN-EN AW-7050 (Cast
billets, d=405, 280, 178mm (+/-5)) The products described as
'aluminium ingots, rods or extrusion billets' are solid metal
products of circular cross-section in the form of bars produced by
continuous casting. >> End-use:
Production of aircraft
components, such as floor structures (ca. 95 %) and vehicle
manufacturing/mechanical engineering niche products.
7604 29 10
3051122/2013
Aluminium alloy rods with a diameter of New
300,1 mm or more, but not more than
533,4 mm
DE
Applicant
ROUND 2014-07-01 >> Mode of operation: Serve as
components. Special alloys provide particular resistance to
corrosion, strength or resistance to heat/pressure. Because of
their special qualities, aluminium alloy rods are used primarily for
the manufacture of parts for machines, equipment and building
materials which need to be resistant to aggressive environments
and/or substantial wear and tear. >> Intended use: Aluminium
alloy rods are often processed in several stages, including
sometimes by the end user. The applicant mainly cuts the
aluminium alloy rods to size or tailors their dimensions to the
customers' specifications. >> End-use of imported product: Used
as components in the building industry (e.g. for construction
machinery and equipment, scaffolding), in the transport industry
(e.g. for trains, car engines) and in the aerospace industry
(aeroplane parts).
7608 20 89
3051158/2013
Aluminium alloy tubes
New
DE
Applicant
ROUND 2014-07-01 >> Commercial name: Aluminium alloy tubes
with a variety of diameters, particularly with a diameter of over
250 mm and a wall thickness of over 10 mm >> Mode of
operation: Serve as components. Special alloys provide particular
resistance to corrosion, strength or resistance to heat/pressure.
>> Intended use: Aluminium alloy tubes are often processed in
several stages, including sometimes by the end user. The
applicant mainly cuts the aluminium alloy tubes to size or tailors
their dimensions to the customers' specifications >> End-use of
imported product: Used as components in the building and
transport (e.g. for trains) industries and in the aerospace industry
(aeroplane parts) and as heat-transfer equipment.
ex 8108 90 50 85
312512/2012
Plates, sheets, strip and foil of non- Am.
DK
Applicant
> ROUND 2014-07-01: Objection against running suspension >
38 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
alloyed titanium
DE
Opposed
Previous Round Titanium sheet or coils, Grade 1, not alloy, for
manufacture/production of plates for plate heat exchangers and
freshwater distillers
ex 8309 90 90 10
1953/1/2002
Aluminium can ends with so-called "ring Am.
pull" full aperture with a diameter of
136,5 mm (± 1 mm)
IE
Applicant
ROUND 1/7/2014: Proposed Text: “Aluminium can ends with socalled ‘ring pull’ aperture with a diameter of between 99.0 mm to
136.5 mm (+- 1 mm) and can bottom ends with a diameter of
between 99.0 mm to 136.5 mm (+- 1 mm)” Prolongation Exercise
1/1/2014
8414 30 81
3089769/2013
Hermetic or Semi-Hermetic, on-off or New
variable
speed
electrical
Rotary
Compressor which is used in the
production of dryer machines, which has
nominal linear power (power rating)
0,4kw or more but not more than 1,5 kW
and a single phase motor
TR
Applicant
ROUND 2014-07-01 Rotary Compressor which works with the
principle of compressing refrigerant by electrical motor, which is
used in Heat-Pump Dryer Machines to reduce energy
consumption
8414 80 73
3081186/2013
Rotary
displacement
single-shaft New
compressor, dedicated for work only
with refrigerants R134a or R407c, with
following parameters:
— External diameter more than 90 mm
but not more than 110 mm
— Voltage more than 220 V but not
more than 240 V, at 50 Hz
— Capacity more than 800 Watt but
not more than 1 900 Watt
for the use in tumble home dryers for
clothes
PL
Applicant
ROUND 2014-07-01: The compressor for the use in tumble home
dryers for clothes
8431 20 00
3093074/2013
Aluminum core, plastic tank Radiator, New
with integral steel support structure and
an open core square wave design of 9
fins per inch (fpi) for use in the
manufacture of vehicles 8427
(1)
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used used in
the assembly of fork lift trucks >> the manufacturing process
being used Assembly >> what the finished product is fork-lift
trucks
8501 10 99
3042035/2013
DC stepping motor, with
New
— an angle of step of 7,5 ° (± 0,5 °)
— a two-phase winding,
— a rated voltage of 9 V or more, but
not more than 16,0 V
— of a specified temperature range
covering at least – 40 °C to +
105 °C
AT
Applicant
ROUND 2014-07-01 DC stepping motor with the following
properties: -Operating voltage: 9.0 – 16,0 V DC -Operating
temperature: - 40° … +105°C -Storage temperature: 1h / + 120°C
-Insulation Class (winding): Class F : 155°C -Coil resistance:
18,2Ω ± 5% at 25°C -Step angle: 7,5° per full step (48 poles) Weight: approximately 30g This motor might be delivered with or
without connecting pinion The motor has an output of less than
37,5 W. The motors are used for ventilation control of cars.
39 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
— whether or not with connecting
pinion
— whether or not with motor drive
connector
ex 8501 10 99 80
1285/2008
DC stepping motor, with:
Am.
— an angle of step of 7,5° (± 0,5°),
— a pull-out torque at 25 °C of
25 mNm or more,
— a pull-out pulse rate of 1 960 pps or
more,
— a two-phase winding, and
— a rated voltage of 10,5 V or more,
but not more than 16,0 V
AT
Applicant
Prolongation Exercise 1/1/2014
8503 00 99
3081213/2013
Stator for brushless motor of a kind New
used in the production of washing
machines
PL
Applicant
ROUND 2014-07-01 Product is used for production of washing
machines. Designed as a ring with electromagnetic coils placed
on circumference. Coils produce electromagnetic field which
reacts with magnets built-in moving part of motor (called rotor)
and drive a washing machine drum. Design is based on unique
constructional parameters (large diameter and small depth of
motor) which eliminates necessity of using fan belt decreasing in
this way noise and vibrations during process of washing.
8504 40 90
3042075/2013
Module for converting alternating current New
into direct current and direct current into
direct current with
— a rated power of not more than
100 W
— an input voltage of 80 V or more, but
not more than 305 V
— an certified input frequency of 47 Hz
or more, but not more than 440 Hz
— one or more constant current
output(s)
— an operating temperature range of –
40 °C or more, but not more than +
85 °C,
— pins for mounting to a printed circuit
AT
Applicant
ROUND 2014-07-01: The module is used for converting altering
current to direct current (rectifier) as well as for converting direct
current to direct current (static converter). The module is soldered
on printed circuit boards which are used with telecommunication
apparatus, automatic data-processing machines and units thereof.
In principle the module can also be mounted on printed circuit
boards for other use
ex 8505 11 00 70
343278/2013
Disc:
Am.
— with a diameter of not more than
90 mm,
— whether or not containing a hole in
the centre,
— consisting of an alloy of neodymium,
iron and boron, covered with nickel,
that after magnetisation is intended
PL
Applicant
ROUND 2014-01-01: >> Commercial denomination: Neodymium
magnet >> Application and use: Articles (discs) intended to
become permanent magnets after magnetisation (commonly
referred to in commerce as: neodymium magnets) are used for
the production of car loudspeakers.
40 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
to become permanent magnet,
of a kind used in car loudspeakers
8507 10 20
3087265/2013
Lead-acid accumulators, of a kind used New
for starting piston engines
— not for use in cars
— with a nominal capacity of 32 Ah
— with a length of not more than
205 mm
— with a width of not more than
130 mm
— with a height of not more than
190 mm
NL
AT
Applicant
Co-applicant
ROUND 2014-07-01 >> Mode of operation: A combination of lead
dioxide and sulfuric acid causes a reaction which generates
power after which a peak current is created for the starting and
operating of engines >> Type of product in which it is to be
incorporated: Motorbikes, mopeds, scooters, lawnmowers
ex 8507 30 20 30
1851/2/1997
Cylindrical nickel-cadmium accumulator, Am.
with a length of 65,3 mm (±1,5 mm) and
a diameter of 14,5 mm (±1 mm), having
a nominal capacity of 1 000 mAh or
more, for use in the manufacture of
rechargeable batteries(1)
IE
Applicant
ROUND 2014-07 Proposal of amending goods description, since
"accumulator" equals "rechargeable batteries"?
Prolongation
Exercise 1/1/2014
ex 8507 50 00 20
ex 8507 60 00 20
617/3/1995
Rectangular accumulator, with a length Am.
of not more than 69 mm, a width of not
more than 36 mm and a thickness of not
more than 12 mm, for use in the
manufacture
of
rechargeable
batteries(1)
DK
Applicant
ROUND 2014-07 Proposal of amending goods description, since
"accumulator" equals "rechargeable batteries"? Prolongation
Exercise 1/1/2014 617/4+5/95
635/1+2/95
1689/5+6/96
1705/5/96 From 1.7.97 scoop extended.
ex 8507 50 00 30
1445/4/1995
Cylindrical nickel-hydride accumulator, Am.
of a diameter of not more than 14,5 mm,
for the manufacture of rechargeable
batteries(1)
SE
BE
FR
NL
UK
Applicant
Co-applicant
Co-applicant
Co-applicant
Co-applicant
ROUND 2014-07 Proposal of amending goods description, since
"accumulator" equals "rechargeable batteries"? Prolongation
Exercise 1/1/2014 new TARIC code = 8507 80 91 80
ex 8507 60 00 30
1572/14/1995
Cylindrical lithium-ion accumulator, with Am.
a length of 63 mm or more and a
diameter of 17,2 mm or more, having a
nominal capacity of 1 200 mAh or more,
for use in the manufacture of
rechargeable batteries(1)
IE
Applicant
ROUND 2014-07 Proposal of amending goods description, since
"accumulator" equals "rechargeable batteries"? 816/1/97
41 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
ex 8507 60 00 40
323539/2012
Batteries
of
ion-lithium
electric Am.
accumulators rechargeable with:
— a length of 1 203 mm or more, but
not more than 1 297 mm,
— a width of 282 mm or more, but not
more than 772 mm,
— a height of 792 mm or more, but not
more than 839 mm,
— a weight of 260 kg or more, but not
more than 293 kg,
— power of 22 kWh or 26 kWh, and
— constituted of 24 or 48 modules
FR
Applicant
ROUND 2014-07 Proposal of amending goods description, since
"accumulator" equals "rechargeable batteries"? For use in the
manufacture of rechargeable batteries for the supply of power to
electric motor vehicles
ex 8507 60 00 55
284463/2012
Lithium-ion accumulator in cylindrical Am.
form, with:
— a base similar to an ellipse
squeezed in the middle,
— a length of 49 mm or more (not
including terminals),
— a width of 33,5 mm or more,
— a thickness of 9,9 mm or more,
— a rated capacity of 1,75 Ah or more,
and
— a rated voltage of 3,7 V,
for the manufacture of rechargeable
batteries
(1)
DE
Applicant
ROUND 2014-07 Proposal of amending goods description, since
"accumulator" equals "rechargeable batteries"?
For the
manufacture of rechargeable batteries where, at least, the
accumulator is combined with special electronics to protect
against overcharging, where several accumulators are often
connected together and where a protective sheath is fitted, the
outside of which has contacts and possibly mounting attachments;
used in accu packs and battery blocks
ex 8507 60 00 57
284509/2012
Lithium-ion accumulator, cuboid in Am.
shape, with:
— some of the corners rounded off,
— a length of 76 mm or more (not
including terminals),
— a width of 54,5 mm or more,
— a thickness of 5,2 mm or more,
— a rated capacity of 3 100 mAh or
more, and
— a rated voltage of 3,7 V,
for the manufacture of rechargeable
batteries
(1)
DE
Applicant
ROUND 2014-07 Proposal of amending goods description, since
"accumulator" equals "rechargeable batteries"? Mainly used in
medical appliances such as mobile devices and emergency power
supply units
ex 8507 60 00 80
132863/2010
Rectangular
lithium-ion-accumulator, Am.
with
— a metal casing,
— a length of 171 mm (± 3 mm),
— a width of 45,5 mm (± 1 mm),
— a height of 115 mm (± 1 mm),
AT
DE
FR
Applicant
ROUND 2014-07 Proposal of amending goods description, since
"accumulator" equals "rechargeable batteries"?
42 / 53
28/10/2013
CN code
TARIC
Ref Mail
new or
am.
Description
Cntr
Position
Public Comments
— a nominal voltage of 3,75 V and
— a nominal capacity of 50 Ah
for use in the manufacture of
rechargeable
batteries
for motor
vehicles
(1)
8514 10 80
3007531/2013
Glass Filament Melter with heater New
basket/bushing assembly:
electrically heated,
— with opening
— with a multiplicity of tips (holes) of
platinum/rhodium alloy
— used to melt glass batches and
condition molten glass
— for drawing into continuous fibres
UK
Applicant
ROUND 2014-07-01 > How the component is to be used: To melt
raw batch ingredients into continuous K and U high strength
glass filaments > Any trade name for it: N/A the manufacturing
process being used: Glass fibre production > relevant chemical or
physical characteristics: Platinum rhodium fabricated melter >
what the finished product is: PX melter section
ex 8518 29 95 30
313099/2012
Loudspeakers of:
Am.
— an impedance of 4 Ohm or more,
but not more than 16 Ohm,
— a nominal power of 2 W or more, but
not more than 20 W,
— with or without plastic bracket, and
— with or without electric cable fitted
with connectors,
of a kind used for TV sets and video
monitors manufacture
PL
SK
Applicant
Co-applicant
ROUND 2014-07-01: A request to amend the existing minimum
impedance from 4 to 3 Ohm. >> ROUND 2014-07-01
Loudspeakers are dedicated for mount in a TV set’s or video
monitor’s cabinet (not mounted in their enclosures
ex 8522 90 49 60
ex 8527 99 00 10
ex 8529 90 65 25
256133/2009
Printed
circuit
board
assembly Am.
comprising:
— a radio tuner (capable of receiving
and decoding radio signals and
transmitting those signals within the
assembly) without signal processing
capabilities,
— a microprocessor capable of
receiving remote control messages
and controlling the tuner chipset,
for use in the manufacture of home
entertainment systems
(1)
IE
PL
SK
Applicant
ROUND 2014-07 Proposal of resolving multiple classification
ex 8522 90 49 65
255838/2009
Printed
IE
Applicant
ROUND 2014-07 Proposal of resolving multiple classification
circuit
board
subassembly, Am.
43 / 53
28/10/2013
CN code
TARIC
Ref Mail
ex 8527 99 00 20
ex 8529 90 65 40
Description
new or
am.
Cntr
comprising:
— a radio tuner, capable of receiving
and decoding radio signals and
transmitting those signals within the
assembly, with a signal decoder,
— a radio frequency (RF) remote
control receiver,
— an infrared remote control signal
transmitter,
— a SCART signal generator
— a TV state sensor
for use in the manufacture of home
entertainment systems
(1)
PL
SK
Position
Public Comments
ROUND 2014-01-01: Proposal for new classification > either to
8522 9049 & 8529 9065 > or only to 8527 9900
ex 8522 90 80 97
ex 8529 90 65 50
1804/41/2003
Tuner
transforming
high-frequency Am.
signals into mid-frequency signals, for
use in the manufacture of products
falling under headings 8521 and 8528(1)
HU
FR
PL
TR
AT
TR
Applicant
Co-applicant
Co-applicant
Co-applicant
ROUND 2014-07 Proposal to close this measure since it is
already covered by 8529 9065 60 22.9.03 accepted
8525 80 19
3081236/2013
Full HD camera capable of resolution New
1 920 x 1 080 with two microphones to
be used in production of positions from
heading 8528
PL
Applicant
ROUND 2014-07-01 To be used in production of LCD / LED /
OLED TV sets. Camera is protected by plastic cover and is
mounted in TV cabinet. It is connected with main PCB with a
cable
8525 80 19
3051175/2013
Remote camera head for a digital New
industrial camera system, including in a
camera body,
— with dimensions (without cable
socket)
of
not
more
than
27 x 30 x 38.5
mm
(width x height x length),
— with three MOS imaging sensors
with two or more effective
megapixels per sensor and a prism
block for distribution of the RGB
spectrum colours to the three
sensors,
— with a C-Mount lens mount,
— with a weight of not more than 70 g,
— with an LVDS digital video output,
DE
Applicant
ROUND 2014-07-01 >> Synonyms: Remote camera head, remote
module head, micro camera, module camera; >> Mode of
operation: The remote camera head is used in miniaturised
industrial camera systems. It consists of an image recorder which
digitises the video signal already in the camera head. After digital
transmission via the camera cable the image is further processed
in an attached control unit or an appropriate control panel or using
other control equipment developed by the customer. >> Intended
use: The image recorders are to be used primarily for the
manufacture of medical endoscopy cameras and microscopes.
The application criteria are particularly high light-sensitivity, very
good image recording quality and very small dimensions. There is
further potential for application in the monitoring of industrial
manufacturing and in television transmission.
44 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
— with a permanent EEPROM memory
for local storage of calibration data
for colour rendering and defective
pixel compensation
ex 8527 91 99 10
ex 8529 90 65 35
1179/2009
Assembly consisting of at least:
Am.
— an audio frequency amplifier unit,
comprising at least an audio
frequency amplifier and a sound
generator,
— a transformer and
— a radio broadcast receiver
IE
AT
Applicant
ROUND 2014-07 Proposal of resolving multiple classification
ROUND 2014-01-01 Proposal to reduce scope of CN-codes down
to 8527 9199
ex 8528 59 70 10
1326/1/2000
Liquid crystal display colour video Am.
monitor having a DC input voltage of 7 V
or more but not more than 30 V, with a
diagonal measurement of the screen of
33,2 cm or less,
— either without housing, with back
cover and mounting frame,
— or with a housing specially designed
for mounting,
suitable for the incorporation into goods
of Chapters 84 to 90 and 94
DE
Applicant
ROUND 2014-07-01: A request for a text amendment to be better
tranlated between EN & DE language. >>BREAK 2014-07-01
ROUND 2014-01-01 (resubmission/rollover): request of closing
this suspension since measure is already covered by 8529 9092
50
ex 8529 90 65 55
145824/2010
Ambient light LED board to be Am.
incorporated in goods of heading 8528
(1)
NL
Applicant
ROUND 2014-07 Proposal of amendinging classification into
heading 9405?
ex 8529 90 92 44
837/2005
LCD modules, solely consisting of one Am.
or more TFT glass or plastic cells, not
combined with touch screen facilities,
with or without backlight unit, with or
without inverters and one or more
printed circuit boards with control
electronics for pixel addressing only
EU
BE
CZ
ES
FR
NL
PL
SK
TR
Applicant
ROUND 2014-07-01: A request for adding the TARIC code
85489090xx.
>>BREAK 2014-07-01
ROUND 2014-01-01:
Amending wording of ES and PT version
45 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
Public Comments
ex 8529 90 92 48
1223/2009
Aluminium die cast heat sink, for Am.
maintaining the operating temperature
of transistors and integrated circuits, for
use in the manufacture of products
falling within heading 8527
(1)
CZ
AT
Applicant
ROUND 2014-07 Proposal to merge this measure with item
currently classified under 8529 9092 42 "Heat sinks and cooling
fins of aluminium, for maintaining the operating temperature of
transistors and integrated circuits in television sets"
8536 49 00
3089807/2013
A cubic-shape Power Relay which has New
electromechanical switching function,
has a electrification current of
3 Amperes or more but not more than
16 amperes, driver voltage 5 volts or
more but not more than 24 volts, with a
distance between switching pins of
maximum 12 mm
TR
Applicant
ROUND 2014-07-01 Power-relay that is used in White-Goods’
electronic cards with the aim of switching heater and pump
components
ex 8536 69 90 84
583862/2010
Universal serial bus (USB) socket or Am.
plug in a single or multiple form for
connecting with other USB devices, for
use in the manufacture of goods falling
within headings 8521 or 8528
(1)
SK
CZ
Applicant
Co-applicant
ROUND 2014-07 Proposal to close this measure since it is
already covered by ex 8536 6990 85 Proposal for 1/1/2014
round: Amended description: Universal serial bus (USB) socket or
plug in a single or multiple form for connecting with other USB
devices, for use in the manufacture of goods falling within
headings 8521 or 8528 (1) Hungarian version: Univerzális soros
adatbusz (USB) dugasz vagy foglalat egy vagy több csatlakozási
pont kialakítással USB eszközökhöz, a 8521 vagy a 8528 vtsz.
alá tartozó áruk gyártásához (1)
8537 10 91
3081262/2013
An electronic programmable memory New
controller for machines of a kind used
for recycling and sorting of plastic, metal
and glass packaging, manufactured
according to class 2 of IPC-A-610E
standard
PL
Applicant
ROUND 2014-07-01 >> Commercial denomination: Power box >>
Function: Power box is an electronic device used for controlling
and powering of a recycling and sorting machine for glass, plastic
or metal packaging. Power box contains: a PCBA board with
adders and programmable circuits as well as resistors, capacitors,
electrical connectors, a fuse, 24 V power supply, and metal casing
8537 10 99
3051229/2013
Motor bridge ICs without programmable New
memory
— consisting of one or more integrated
circuits, not interconnected, on
separate lead frames,
— also
with
discrete
MOSFET
transistors combined to control DC
motors in cars
— mounted in a plastic housing
DE
Applicant
ROUND 2014-07-01 >> Intended use and end use: To be built
into cars >> Mode of operation: These motor bridge ICs are used
to control DC motors in cars. They are primarily designed to
control high-current DC motors in an H-bridge configuration, but
their individual components can also be operated separately from
each other as independent switches. (...)
8544 30 00
3093494/2013
Multi-measurement wire harness of a New
voltage of 5 V or more but not more than
UK
Applicant
ROUND 2014-07-01 >> how the component is to be used: used in
the assembly of fork lift trucks >> the manufacturing process
46 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
new or
am.
Cntr
Position
90 V, for use in the manufacture of
vehicles of heading 8427
(1)
Public Comments
being used: Assembly >> what the finished product is fork-lift
trucks
8714 91 10
3087070/2013
Hybride frame, constructed from New
aluminium and carbon, for use in the
manufacture of bicycles
(1)
NL
Applicant
ROUND 2014-07-01 >> Mode of operation: A bicycle frame is the
supporting construction of the bike. This part connects all the
parts of the bike together. A hybrid bicycle frame is made of
carbon and aluminum components. The materials are combined
to amplify certain rider characteristics.
8714 91 10
3087055/2013
Frame, constructed from aluminium, for New
use in the manufacture of bicycles
(1)
NL
Applicant
ROUND 2014-07-01 >> Packaging: Frame in plastic bag in
carton box >> Mode of operation: A bicycle frame is the
supporting construction of the bike. This part connects all the
parts of the bike together. A aluminium bicycle frame is made of
aluminium components, which are jointed together by welding.
The aluminium components are made of pre-shaped tubes or cast
components
8714 91 30
3087046/2013
Front forks, suspended, constructed New
from aluminium, for use in the
manufacture of bicycles
(1)
NL
Applicant
ROUND 2014-07-01 >> Mode of operation: A front fork is a fork
like shaped part which connect the front wheel with the frame,
with a certain angle of freedom to be able to steer the bike. A
suspension front fork is made of 2 components which are
connected by a shock system. One component is connected to
the bike frame, while the other is connected to the front wheel. >>
Type of product in which it is to be incorporated: Bicycle
ex 9002 11 00 50
506/12/1990
Lens unit, having a focal length of Am.
25 mm or more but not more than
150 mm, consisting of glass or plastic
lenses, with a diameter of 60 mm or
more but not more than 190 mm
BE
LU
Co-applicant
Co-applicant
ROUND 2014/07: Resubmission in order to restructure the
description of goods as follows: "Lens unit, - having a focal length
of 25 mm or more but not more than 150 mm, - consisting of glass
or plastic lenses, with a diameter of 60 mm or more but not more
than 190 mm" Prolongation Exercise 1/1/2014
9014 10 00
3051265/2013
Electronic compass in a casing box, with New
the following main components:
— a combination of one or more
application-specific
integrated
circuits (ASIC) and
— one or more microelectromechanical
sensors (MEMS) manufactured with
semiconductor technology, with
mechanical components arranged in
three-dimensional structures on the
semiconductor material,
to be fitted in products under chapters
84-90 and 94
DE
Applicant
ROUND 2014-07-01 >> Commercial name: Electronic compass
>> Synonyms: Device for orientation by cardinal points >>
Description of function: Measuring the Earth's magnetic field >>
Intended use: Testing and calibration, subsequent integration into
various applications >> Name of product manufactured from the
imported product: e.g. navigation systems, pointing devices (e.g.
touchpads), toys
47 / 53
28/10/2013
CN code
TARIC
ex 9022 90 00 10
(1)
Ref Mail
1309/2008
Description
new or
am.
Panels for x-ray apparatus (x-ray flat Am.
panel sensors/x-ray sensors) consisting
of a glass plate with a matrix of thin-film
transistors, covered with a film of
amorphous silicon, coated with a
scintillator layer of caesium iodide and a
metallised protective layer, with an
active
surface
of
409,6 mm² × 409,6 mm² and a pixel size
of 200 µm² × 200 µm²
Cntr
DE
Position
Applicant
Public Comments
ROUND 2014-07-01: A request for modification to the existing text
description as follows: Panels for x-ray apparatus (x-ray flat panel
sensors/x-ray sensors) consisting of a glass plate with a matrix of
thin-film transistors, covered with a film of amorphous silicon,
coated with a scintillator layer of caesium iodide and a metallised
protective layer, with an active surface of 409,6 mm2 x 409,6mm2
or 350 mm x 426 mm or 274 mm x 350 mm and a pixel size of
200 µm2 x 200 µm2 or 125 µm². >>BREAK 2014-07-01
Prolongation Exercise 1/1/2014
Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253 11.10.1993, p.
1).
48 / 53
28/10/2013
Kota Talepleri
CN code
TARIC
Ref Mail
Description
Volume
New or
Am.
Country
Position
Public Comments
2818 20 00
3087286/2013
Aluminium oxide (CAS RN 1344-28-1), Q/2657000t New
other than artificial corundum
onnes,
01.01-31.12
NL
Applicant
ROUND 2014-07-01 >> Mode of operation: The
oxygen of the alumina must be separated from
the aluminium; this is achieved through the
electrolysis process >> Type of product in which it
is to be incorporated: The alumina is dissolved in
an electrolytic bath >> End use of the final
product: (liquid) aluminium metal
2905 11 00
3041169/2013
3044119/2013
Methyl Alcohol (CAS RN 67-56-1)
Q/250000to New
nnes,
01.07-31.12
Q/5792000t
onnes,
01.01-31.12
DE
ES
Applicant
Applicant
ROUND 2014-07-01 I Methyl Alcohol (Methanol):
the use of this imported product is the
manufacture of formaldehyde in different
concentrations for selling and for its captive use in
the manufacturing such as glues and ureaformaldehyde
resins,
paraformaldehyde,
polyalcohol’s, etc II >> Handelsbezeichnung
Methanol >> Synonyme: Methylalkohol >>
Endverwendung der Einfuhrware: Benzin für
Verbrennungsmotoren
Essigsäure
Biodiesel
Formaldehyd Methyl-teritär-butylether (MTBE)
Frostschutzmittel
2905 31 00
3015474/2013
Ethylene Glycol (CAS RN 107-21-1)
Q/615000to New
nnes,
01.01-31.12
IT
Applicant
ROUND 2014-07-01 >> Synonyms: ethanediol;
>> Use of the importer’s end products: >>> PET
bottles >>> Polyester fibers >>> Polyesters films
>>> automotive >>> coatings for various
applications >>> shoe sole >>> furniture >>> heat
transfer fluids in oil and gas business
2909 41 00
3015486/2013
3015506/2013
3041185/2013
2,2’-Oxydiethanol (CAS RN 111-46-6)
Q/10000ton New
nes, 01.0731.12
Q/210000to
nnes,
01.01-31.12
Q/210000to
nnes,
01.01-31.12
ES
IT
IT
Applicant
Applicant
Applicant
ROUND 2014-07-01 I >> Synonyms: Diethylene
glycol, digol >> Use of the importer’s DEG end
products: >>> insulation >>> building industry
>>> automotive >>> coatings for various
applications >>> metal working-fluids >>> PET
bottles >>> furniture >>> heat transfer fluids II >>
DIETHYLENE GLYCOL >> A straight chain
dihydric alcohol aliphatic compound terminated on
both ends by a hydroxyl group. >>
Polyesterification via polycondensation with
dicarboxylic acids >> The finished product is a
Polyester
Polyol
used
in
Polyurethane
formulations for: Shoe sole systems, flexible
foam, rigid foam and various polyurethane
formulations
49 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
Volume
New or
Am.
Country
Position
Public Comments
2917 20 00
3093014/2013
Hexahydrophthalic anhydride (HHPA) Q/2000tonn
(CAS RN 85-42-7)
es,
New
UK
Applicant
ROUND 2104-07-01 >> how the component is to
be used, used as a hardener >> the
manufacturing process being used Polymerisation
>> what the finished product is Coating resin
ex 2927 00 00 85
326788/2012
499451/2013
C,C’-Azodi(formamide) (CAS RN 123- Q/100tonne Am.
77-3) with:
s,
01.01— a pH of 6,5 or more but not more 31.12
than 7,5, and
— a semicarbazide (CAS RN 57-56-7)
content
of
not
more
than
1 500 mg/kg as determined by liquid
chromatography mass spectrometry
(LC-MS),
— decomposition temperature range of
195 °C - 205 °C,
— specific gravity 1,64 - 1,66, and
— combustion heat 215 - 220 Kcal/mol
UK
UK
EU
Applicant
Applicant
Opposed
ROUND 2014-01-01 (renewal/rollover) >> how
the component is to be used: Polymer additive for
use as a foaming agent to light-weight polymer
articles >> the manufacturing process being used:
PET production >> what the finished product is:
light weight polymer items (eg packaging)
1.1.2013 Round: Polymer additive for use as a
foaming agent to light-weight polymer aticles
ex 3204 17 00 55
265499/2011
Dye C.I. Pigment Red 169 (CAS RN Q/40tonnes, Am.
12237-63-7)
01.01-31.12
NL
BE
Applicant
ROUND 2014-07-01: Request for a quota based
on a classification committee decision that
pigment preparations can only be used if the
imported product contains 100% of a pigment.
The proposed text descripton is as follows: Dye
C.I. Pigment Red 169 (CAS RN 12237-63-7) and
preparations based thereon with a Dye C.I.
Pigment Red 169 content of 50% or more
determined
by
high
pressure
liquid
chromatography >>BREAK 2014-07-01 1/7/2013
round: probably quota (w.n.0707)?
3901 10 10
3901 90 90
3045258/2013
Linear
low-density
polyethylene Q/7550000t New
(LLDPE) in the form of granules with
onnes,
— exclusively butene as a comonomer 01.01-31.12
— a comonomer content of at least
0,5 % by weight or more but not
more than 6 % by weight
— a melt flow index in accordance with
ISO 1133 (MFI, 190 °C, 2,16 kg) of
1.0 or more but not more than 3,0
— a relative viscosity in accordance
with DIN EN ISO 1628-3 of 1,44 or
more but not more than 1,6
— a density in accordance with
DE
Applicant
ROUND 2014-07-01 >> Commercial name:
LLDPE C4 copolymer >> Mode of operation:
Granules to be processed into blown or cast film
by melting and moulding in extrusion plants >>
Intended use: Plastics can be processed/moulded
only by extrusion (heating, mixing, shaping,
cooling). >> Name of product manufactured from
the imported product: Polyethylene film for a wide
range of applications >> End-use of imported
product: Protection, packaging, covering of
products
50 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
Volume
New or
Am.
Country
Position
Public Comments
DIN EN ISO 1183 of 0,918 or more
but not more than 0,924.
3901 10 10
3090784/2013
3090810/2013
3090827/2013
Linear
low-density
polyethylene
(LLDPE) copolymer, having:
— a melt flow rate of 0,8 or more, but
no more than 1,2
— a density of 916 or more, but no
more than 920
— a specific gravity of less than 0.94
— not more than 13 % of butene
3901 10 10
3007723/2013
3901 10 10
ex 3902 30 00 96
Q/4000tonn New
es, 01.0131.12
Q/6000tonn
es, 01.0131.12
Q/8000tonn
es, 01.0131.12
UK
UK
UK
Applicant
Applicant
Applicant
ROUND 2014-07-01 >> how the component is to
be used Linear low density polyethylene for Blown
film >> the manufacturing process being used
The manufacturing process involves melting the
polymer using a combination of heat and pressure
and blowing a bubble of the required width and
film thickness. If necessary the film is then printed
and converted into bags and sacks either as an in
line operation with the extruder or as an out of line
process >> what the finished product is sacks,
bags, tubing or sheets which are used for
manufacturing/industrial processes predominately
for the food industry but also for many other
manufacturing/industrial sectors
Linear polyethelene with a specific Q/20000ton New
gravity of less than 0,94 - and has the nes, 01.01following features:
31.12
— Linear low-density polyethylene
(LLDPE) Copolymer - C4 cast
— A melt flow rate of 1,8 (dg/min) or
more, but no more than 3,2 (dg/min)
— Density of 916 (kg/m³) or more, but
no more than 920 (kg/m³)
IT
Applicant
ROUND 2014-07-01 >> For chemical products
only: The manufacturing process is based on the
coextrusion in 3 or more layers of C4 granules at
high temperatures (up to 280 °C) in cast lines >>
The use of the finished product - stretch film – is
for pallet wrapping or different applications
(bundling, general pur-pose, etc).
3082396/2013
The product falls within CN Code 3901 Q/400000to New
10 10 – linear polyethylene having a nnes,
specific gravity of less than 0,94 – and 01.01-31.12
has the following features:
— Linear low-density polyethylene
(LLDPE) Copolymer
— A melt flow rate of 1,8 (dg/min) or
more, but no more than 3,2 (dg/min)
— Density of 916 (kg/m³) or more, but
no more than 920 (kg/m³)
— Not more than 15 % of Butene
FI
Applicant
ROUND 2014-07-01 >> The product is suited for
cast film conversion and mainly for stretch film
applications >> Stretch cast film is used mainly for
packing and protection purposes in pallet
wrapping
326444/2012
Propylene-ethylene copolymer, with a Q/500tonne Am.
melt viscosity of not more than 1700 s,
01.01mPa at 190°C, as determined by ASTM 31.12
D 3236 method
UK
Applicant
ROUND 2014-07-01: A request for an increase of
the quota amound.
Propylene-ethylene
copolymer intended as a laminating adhesive for
nonwoven products used in diapers/pants.
51 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
Volume
New or
Am.
Country
Position
Public Comments
garments etc
3905 30 00
137255/2010
Poly(vinyl alcohol), whether or not Q/18000ton Am.
containing unhydrolysed acetate groups nes,
1.1.31.12.
DE
NL
BE
DE
DE
ES
Applicant
Applicant
Co-applicant
Co-applicant
Opposed
Opposed
ROUND 2014-07-01: >> A request to increase the
quota amount to 28 000 mts. >> objection against
increase (or even the whole measure in total)
Proposal
for
1/1/2014
round:
Amended
description: “Poly(vinyl alcohol), whether or not
containing unhydrolysed acetate groups for use in
the manufacture of adhesives falling within
heading 3506”
ex 3905 30 00 30
451176/2013
Vinyl alcohol containing unhydrolysed Q/192tonne
acetate
groups s,
and methylenebutanedioic sodium salts
copolymer (CAS RN 122625-12-1) of a
kind used for the manufacture of thermal
paper
(1)
Am.
FR
ES
Applicant
Opposed
ROUND 2014-01-01: PVA KL-318 / Use for our
Thermal Paper production
7202 49 50
343230/2013
Ferro-chromium containing by weight Q/100543to
more than 0,05 % but not more than nnes,
0,5 % of carbon (CAS RN 1114-46-8)
Am.
BE
BE
DE
EU
Applicant
Co-applicant
Opposed
ROUND 2014-07-01/QUOTA: Re-submission of
a quota request on the ground of insufficient
supply in the EU. ROUND 2014-01-01 / QUOTA:
Commercial denomination of the product is low
carbon ferrochrome (LCFC). It is to be used in the
production of stainless steel, which have
chromium content of 10 to 20%. Chrome is added
as alloy element to steel to make it corrosion
resistant. Stainless steel is used in various
applications, such as home appliance (white
goods), automotive (e.g. exhaust system),
construction (e.g. elevators), oil & gas (e.g. pipes)
etc. Low Carbon Ferrochrome is also used in
some special steel, like tool steel and high speed
steel
7604 29 10
3051137/2013
Aluminium alloy rods with a diameter of Q/131111to New
200 mm or more, but not exceeding nnes,
300 mm
01.01-31.12
DE
Applicant
ROUND 2014-07-01 >> Commercial name:
Aluminium alloy rods with a diameter of 200 mm
or more, but not exceeding 300 mm >> Mode of
operation: Used as components. Special alloys
52 / 53
28/10/2013
CN code
TARIC
Ref Mail
Description
Volume
New or
Am.
Country
Position
Public Comments
provide either particular corrosion resistance,
strength, pressure or heat resistance. Owing to
their special qualities, aluminium alloy rods are
used primarily for the manufacture of parts for
machines, equipment and building materials
which need to be resistant to aggressive
environments and/or substantial wear and tear.
>> Intended use: Aluminium alloy rods are often
processed in several stages, sometimes also by
the end user. The applicant mainly cuts the
aluminium alloy rods to size or tailors their
dimensions to the customers' specifications. >>
End-use of imported product: Used as
components in the construction industry (e.g. for
construction
machinery
and
equipment,
scaffolding), in the transport industry (e.g. in
trains, automobiles) and in the aerospace industry
(aircraft parts).
ex 9001 90 00 80
1142/2008
Unmounted glass lenses, prisms and Q/5000000 Am.
cemented elements for use in the pieces, 1.1.manufacture of goods of CN codes 31.12.
9002, 9005, 9013 10 and 9015
(1)
AT
Applicant
ROUND 2014-07-01: A request for the
amendment of the existing text description as
follows: Unmounted glass lenses, prisms and
cemented elements for use in the manufacture or
repair of goods of CN codes 9002, 9005, 9013 10
and 9015
9003 11 00
9003 19 00
3051241/2013
Spectacle frames of plastic or base Q/1950000 New
metal
pieces,
01.01-31.12
Q/3850000
pieces,
01.01-31.12
DE
Applicant
ROUND 2014-07-01 >> Commercial name:
Spectacle frames, spectacle mountings, eyeglass
rims >> Description of function: Corrective
glasses consist of a spectacle frame and userspecific customised lenses. 'User-specific' means
that the optical properties of the lenses are
adjusted to compensate, by means of refraction,
for the user's defective vision. As the initially
round lenses are processed optically to
incorporate the refraction parameters, they must
also be fitted to the shape of the respective frame.
This is done by grinding and/or polishing the
lenses. >> End-use of imported product:
Corrective glasses
53 / 53