ANNEXURE – 1
MANDATORY DISCLOSURE
“The information has been provided by the concerned institution on the onus of authenticity lies with
the institution and not on AICTE.”
I. NAME OF THE INSTITUTION
GEETHANJALI COLLEGE OF ENGG. & TECH.
Cheeryal (V), Keesara (M), Ranga Reddy Dist
Pin: 501301. Telangana
II. NAME & ADDRESS OF THE DIRECTOR
Dr. S. Udaya Kumar, Principal
GEETHANJALI COLLEGE OF ENGG. & TECH
Cheeryal (V), Keesara (M), Ranga Reddy Dist
Pin: 501301. Telangana
III. NAME OF THE AFFILIATING UNIVERSITY
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY
Kukatpally, HYDERABAD-500 072
IV. GOVERNANCE
4.1
MEMBERS OF THE BOARD :- All the members of the Board are professionals in various
fields with high educational qualifications and vast experience in administration. Such
background will indeed give the desired direction to the Institutions sponsored by the
Society. The profile of the members is as follows:1. Mr. G.R.Ravinder Reddy, Chairman : He is a post graduate in Civil Engineering and formerly a
Senior Police Officer. He has graduated from NIT, Warangal and has also completed his Post
Graduation from the same Institution. Subsequently he joined the civil services and served the Police
department for more than 20 years before taking up voluntary retirement. With an excellent
education and vast field experience, he has a vision to develop the institution into a centre of
learning, where discipline would be a hallmark.
2. Dr. G. Sridevi, Member : A dentist who graduated from the prestigious Osmania University will
contribute immensely in adding new dimensions to the growth of the institution
3. Ms. G. Seetha Reddy- Member
4. Ms. A. Manjula Reddy-Member
5. Dr. S.Durga Bhavani-Prof.inCSE, SIT,JNTUH-Nominee
6. Sri Narendra Shukla :- He is presently the CEO-CORDYS he has graduated from NIT, Warangal
and has done his MBA from IIM-Calcutta. He began his professional career by working in LAKME
and then moved on to automobile industry in DUBAI. After a decade’s stint in Dubai, he shifted to
software industry and is presently the CEO of CORDYS.
7. Dr.C.Srinath – Principal, Govt Polytechnic for Women for minorities, Hyd Technical
Nominee
8. Dr.S.T.Rajmohan – Dean-Admin
9. K.Mahender- Assoc Prof.-EEE
10. Prof.K.Somasekhara Rao – Dean Academics
11. Vishwanath Ekbote-Director, Visiontek
12. Veenu Jindal – Vice President, Deloitte
13. Dr.S.Udaya Kumar – Principal –Member Secretary
4.2
Educational –
Members of Academic Advisory Body:-
1. Dr.S.Uday Kumar-Chairman:- He is presently working as Principal- in Geethanjali College of
Engineering & Technology, Cheeryal (V), Keesara (M), R. R. Dist. He has long experience in
both Academic & Administration. He did his Post Graduation from Osmania University in
Computer Science and Ph.D in Computers Science from JNTU.
2. Dr.D.Ramakrishna Rao –Dean R&D-Member
3. Dr.S.T.Rajmohan – Dean, Accademics
4. Dr.K.Narasimha Murthy-Dean Exams
5. Dr.P.Srihari
6. Dr.D.S.R.Murthy
7. Dr.Sudha Radhika
8. Dr.T.Siva Prasad
9. Dr.G.Neeraja Rani
10. Dr.M.Srinivas
11. Dr.M.Satyanarayana
12. Dr.D.Ratnadeepthi
13. S.Tirupathi Rao
14. Dr.C.V.Narasimhulu
15. EVLN Rangacharyulu
16. Dr.S.Nagender Kumar
17. N.Chandrakanth
18. Dr.GVS Acharyulu
19. Dr.M.Devaiah
20. CBN Murthy
21. S.V.Gangadharam
22. Dr.V.S.Triveni
23. Dr.P.Mallikharjuna Rao
24. Dr.S.Rama Murthy
25. D.Samuel John
26. Prof.K.Somasekhara Rao – Dean Academics - Convenor
4.3
Frequency of the Board Meetings and Academic Advisory Body :Board meetings – once in 3 months.
Academic Advisory body meetings-Once in a semester
Signature of Authorized Signatory with date
1
4.4
Organizational chart and processes :Board of Governors
Secretary
Principal
Heads of Dept
Lab Incharges
4.5
Administrative Officer
Office Staff
Non-Teaching Staff
Accounts Officer
Office Staff
Nature and Extent of involvement of faculty and students in academic affairs/improvements :-
1) College Academic Committee:- This Committee consists of Heads of the Departments, Professors
& Associate Professors. All the Academic activities are planned and implemented by the members
of this Committee. The opinions and ideas of the faculty are taken into consideration before policy
matters are decided.
2) Class Review Committee:- It consists of 5 students and the entire faculty handling the courses for
that class with the HOD as the coordinator. The members are actively involved in the academic
affairs including the coverage of syllabus , expert lectures, technical activities of the students,
technical visits, paper presentation etc.
3) Student counseling:- Each faculty member is allotted 10 students. He is responsible for academic
guidance of the students allotted to him. The faculty member redresses the problems faced by the
student in academic and administrative matters.
4.6
Mechanism/Norms & Procedure for democratic/good Governance :The Institution
believes in a democratic set up. Each department with its head and members decide upon the
requirements with consensus. The staff, lab equipments, library books required are projected to the
Principal by the HOD. For all procurements, quotations are obtained, technical
specifications studied, rates are compared by the department and the proposals are forwarded
to the management through Principal.
4.7
Student Feedback on Institutional Governance / faculty performance :- Students are
given feedback forms within two weeks of the commencement of the class work to evaluate
the effectiveness of teaching. The criteria taken are
a).Punctuality & Regularity of the teacher
b).Teacher’s control and conduct of the class
c). Understandability
d). Discussion of class tests/tutorials / assignments
Signature of Authorized Signatory with date
2
e). Coverage of syllabus
f). Overall rating of the teacher of the subject
The feedback is analyzed and is utilized to counsel the teachers whose performance is not upto mark. The
students are also asked to comment about the facilities such as Library, Canteen, Sports transport etc., so
that corrective measures can be taken.
4.8
Grievance Redressal mechanism for faculty, staff and students :- The students can express
their grievances through suggestions box and also through feedback forms. The management & Principal
also attend special sessions to know the problems of the students. So, also faculty & staff meetings are held
to know their problems and their grievances are attended to. A grievance redressal cell with the Secretary,
Principal and HODs is formed where the problems are discussed & solutions arrived at.
V. PROGRAMMES
5.1
Name of the Programmes approved by the AICTE :Undergraduate : B.Tech.
Computer Science & Engineering
Electronics & Communication Engineering
Electrical & Electronics Engineering
Mechanical Engineering
Civil Engineering
Post-Graduate: M.Tech.
Electronics & Communication Engineering
Embedded Systems
VLSI System Design
Computer Science
Computer Science & Engineering
Software Engineering
Machine Design
Power Electronics
Master of Business Administration
5.2
Name of the Programmes accredited by the AICTE (NBA) :Sl. No.
1
2
3
Name of the Programme
B.Tech. - ECE
B.Tech. –CSE
B.Tech. – IT
Accreditation status
Accredited for 2 years
Accredited for 2 years
Accredited for 2 years
5.3
The Details of the approved programmes are as follows :Name
Comp. Sci
Elect &
Elec. &
Civil
&
Comm.
Elect.
Engg.
Engg.(CSE)
Engg.
Engg.(EE
(ECE)
E)
Number of seats
240
240
60
120
Duration in Years
4
4
4
4
Cut off mark/rank for 40 out of
40 out of
40 out of
40 out of
admission during the 160 in
160 in
160 in
160 in
last three years
EAMCET
EAMCET EAMCET EAMCET
Mechani
cal Eng.
(ME)
MBA
M. Tech
180
4
As
decided
by
60
2
168
2
Convener
60 out of
60 out of
60 out of
60 out of
200 in
ICET
Signature of Authorized Signatory with date
3
200 in
ECET
Fee
Placement Facilities
Campus placement in
last three years with
minimum salary,
maximum salary and
average salaries
IV.
Sl.
No.
200 in
ECET
60 out of
200 in
ECET
B.Tech-67,500/-, M.Tech-57,000/-, MBA-35,000/A Placement Officer is appointed who is in-charge of campus
placements.
160 students placed in different companies for the Academic year 201213
Maximum salary-3.5 lakhs per annum,Average salary -1.80 to 2.0
lakhs per annum,Minimum salary – 72000/- per annum.
Faculty:
Dept : B.Tech.( ECE) -UG & PG
Name of the
Designa
Cat.
Staff Member
tion
200 in
ECET
ECET
Qualification
Ph.D
PG
UG
Experience
T
I
R
Date of
Joining
Faculty
Registratio
n ID
M.S (EC),
M.Tech.
(DSCE)
Ph.D
(Error
Control
Codeing)
25
-
-
27/02/2015
72150401095414
1
Dr. P. Srihari
UG
Professor
& HOD
2
Dr. C. Venkata
Narasimhulu
UG
Professor
B.Tech
.
M.Tech
(ICS)
Ph.D (Sig.
Ima.
Proc.)
20
-
-
15-11-2012
59150401102004
3
Dr. M.
Satyanarayana
PGVLSISD
Professor
B.Sc
M.Sc
(Tech.)
Ph.D
(Ele. Opt.)
35
9
-
17-10-2013
78150407125033
4
K Somasekhara Rao
UG
Professor
BE
-
7
32
-
28/06/2008
16150402153852
5
D.Ramakrishna Rao
PGECE
Professor
B.E
-
7
35
-
15/05/2008
20150402095533
6
EVLN Ranga
Charyulu
UG
Professor
B.Tech
.
-
23
-
-
4/12/2013
46150402155550
Ph.D
(Global
Nav. &
Sat.Sys.
)
-
-
8
1/11/2014
21150407111354
-
13
-
-
28/05/2007
-
11
.5
-
-
16-12-2008
-
11
-
-
4/6/2011
M.E (DS)
-
17
-
-
23-06-2011
M.Tech.
(VLSI-SD)
-
8
-
-
22-06-2013
ME (Elect.)
-
11
-
-
24-06-2013
7
Dr. V. Satya Srinivas
PG-ES
8
P.Sudhakar
UG
9
S.Jyothirmayee
UG
10
A. Shanker
UG
11
D. Venkata Rami
Reddy
12
B. Sreelatha
UG
13
J. Mrudula
UG
14
M. Christhu Raju
15
Assoc.
Prof.
Assoc.
Prof
Assoc.
Prof.
Assoc.
Prof.
B.E
B.E
B.Tech
B.E
B.Tech
.
M.Tech.
(AE)
M.Tech
(Elect. &
Inst.)
M.E
(MRE)
ME (ECE)
M.Tech
(DE&CS)
M.Tech.
(ES)
M.Tech.
(SSP)
Assoc.
Prof.
B.Tech
.
Assoc.
Prof.
Assoc.
Prof.
B.Tech
.
B.Tech
.
PGECE
Assoc.Pro
f.
B.Tech
.
M.Tech.
(ECE)
-
15
U.Appalaraju
UG
Assoc.Pro
f.
AMIE
M.Tech
(DSCE)
-
9.
6
-
-
2/6/2014
16
R.Odaiah
UG
B.E.
M.E. (SSP)
-
11
-
-
2/6/2014
17
G.Sreelakshmi
B.Tech
M.E. (DS)
-
12
-
2/6/2014
18
M.Laxmi
B.Tech
M.Tech.
-
8
-
5/6/2014
PG-ES
PG-ES
PG-
Assoc.Pro
f.
Assoc.Pro
f.
Assoc.Pro
2/6/2014
2.
5
-
Signature of Authorized Signatory with date
14150407112853
58150402103822
11150401105051
5493150408101138
97150402151254
09150402163847
3952150408115449
5441150409115
88150402171414
85150402165321
71150402-
4
ECE
UG
f.
Assoc.Pro
f.
19
S.Krishna Priya
20
T. Rama Krishna
21
S. Vasu Krishna
22
M.Muthamma
UG
Asst. Prof.
23
M.Hemalatha
UG
Asst.Prof.
24
M.Venkata Sireesha
UG
Asst.Prof.
PGVLSISD
PGVLSISD
Assoc.Pro
f.
Assoc.
Prof.
(ECE)
B.Tech
M.E. (CS)
-
B.Tech
M.Tech
(ECE)
-
12
9
19/06/2014
95150402162444
B.E
M.Tech.
(DS&CE)
-
13
5
3/6/2015
24150402112647
B.Tech
M.Tech
(ES&VLSI
-SD)
-
7
-
-
2/6/2008
M.Tech.
(DECS)
-
8
-
-
13.06.2012
M.Tech
(ES)
-
7
-
-
14.06.2012
M.Tech.
(VLSID)
-
7.
5
-
-
19-06-2012
B.Tech
B.Tech
25
K V S Nagaraju
UG
Asst.Prof.
B.Tech
26
P. Kalavathi
UG
Ast. Prof.
27
M R Vishnu Kishore
UG
Asst.Prof.
28
G. Pavani
29
B.Sc,
M.Sc
B.Tech
B.Tech
.
B.Tech
.
B.Tech
.
B.Tech
.
M.Tech.
(Space
Tech.)
M.Tech.
(ES)
M.Tech.
(DSCE)
M.Tech.
(DECS)
M.Tech.
(DECS)
M.Tech.
(ES)
PG-ES
Asst Prof.
M. Uma Rani
UG
Asst Prof.
30
V.Venkata Lakshmi
UG
Asst. Prof.
31
B.Mamatha
UG
Asst. Prof.
32
D. Sony
UG
Asst. Prof
B.Tech
.
33
P. Sneha Naga Silpa
UG
Asst. Prof
B.Tech
34
M.Chathar Singh
UG
Asst. Prof.
B.Tech
35
S. Surya Prakash
Reddy
UG
Asst. Prof.
B.Tech
.
M.Tech.
(VLSI-SD)
M.Tech.
(VLSI-SD)
M.Tech.
(ES)
36
M.Krishna Chaitanya
PGVLSISD
Asst. Prof.
B.Tech
.
M.Tech.
(VLSI&ES
)
37
R. Chiranjeevi
UG
Asst. Prof.
B.Tech
.
38
G. Poshamallu
UG
Asst. Prof.
B.Tech
.
M.Tech.
(ES)
M.Tech
(ES&VLSI
-SD)
39
B. Jugal Kishore
UG
Asst. Prof.
B.Tech
.
M.Tech.
(VLSI)
40
Y. Naga Lakshmi
UG
Asst. Prof.
172334
76150402173646
9.
5
M.Tech.
(VLSI-SD)
B.Tech
.
M.Tech.
(ES)
-
-
5.
5
16/06/2014
24-09-2012
5088150409145243
51150402145306
3554150408150229
5968150409121806
27150402093829
3697150409091044
52150402112852
52150402112852
52150402112852
69150402123035
7520150410133304
09150401111701
87150402110129
89150402130230
-
1
-
-
7/1/2013
-
5
-
-
13-06-2013
-
9
3
-
24-06-2013
-
4
-
-
27-06-13
-
6
-
-
2/6/2014
-
4
-
-
16/06/2014
-
1
-
-
11/6/2014
-
3
-
-
19.06.2012
-
1
-
-
2/6/2014
-
7.
5
-
-
16/06/2014
50150402125047
-
3
-
-
4/12/2014
23150401113601
-
-
1
-
4/12/2014
59150402132402
-
8/4/2015
-
9/4/2015
1
2
7
1
-
41
A. Rama Kishore
UG
Asst. Prof.
B.Tech
.
M.Tech.
(VLSI-SD)
-
5
-
-
9/4/2015
42
Md. Touseef Sumer
UG
Asst. Prof.
B.Tech
.
M.Tech.
(SSP)
-
5.
8
-
-
10/4/2015
43
M.Krishna
UG
Asst. Prof.
B.Tech
.
M.Tech.
(VLSI-SD)
-
4
-
-
10/4/2015
Signature of Authorized Signatory with date
4910150409152526
8184150409123727
2015150409210024
2279150410125404
1450150411-
5
44
L. Kavya
UG
Asst. Prof.
B.Tech
.
M.Tech.
(DSCE)
-
2
-
45
Y. Siva Rama
Krishna
UG
Asst. Prof.
B.Tech
.
M.Tech.
(WBC)
-
2
2
46
T. Suman
UG
Asst. Prof.
B.Tech
.
M.Tech.
(SSP)
-
1
47
K. Victor
UG
B.Tech
.
M.Tech.
(DC)
-
Asst. Prof.
-
13/4/2015
11/4/2015
13/4/2015
1.
5
4
13/04/201
5
48
Ch. Anusha
UG
Asst. Prof.
B.Tech
.
M.Tech.
(VLSI&ES
)
-
F
13/04/2015
49
S. Vijaya Lakshmi
UG
Asst. Prof.
B.Tech
.
M.Tech.
(WMC)
-
10
13/04/2015
50
S. Rama Devi
PG-ES
Asst. Prof.
B.Tech
.
M.Tech.
(ES)
-
-
-
15/04/201
5
-
-
16/04/201
5
2
51
V. Siddhartha
UG
Asst. Prof.
B.Tech
.
M.Tech.
(ES&VLSI
D)
-
52
A. Subramanyam
UG
Asst. Prof.
B.Tech
.
(ECE)
M.Tech.
(VLSI&
ES)
-
4.
5
1.
5
-
17/04/201
5
53
G. Venkat Rao
UG
Asst. Prof.
B.Tech
.
M.Tech.
(VLSI-SD)
-
1
-
-
20/04/201
5
54
J. Bharathi
UG
Asst. Prof.
M.Tech.
(S&SP)
-
3
-
-
20/04/201
5
55
B. Ramu
UG
Asst. Prof.
M.Tech.
(S&SP)
-
3
-
-
M.Tech.
(ES)
-
56
V. S. Lakshmi Priya
UG
Asst. Prof.
B.Tech
.
(ECE)
B.Tech
.
(ECE)
B.Tech
.
(ECE)
5/5/2015
-
-
5/5/2015
114458
5743150413151805
0975150411123355
61150407055321
8264150412125826
3587150412141830
8367150413101042
0459150413155001
0004150416132317
66150405224408
8411150420121956
8175150420124919
5375150505112053
3264150505115156
Dept : B.Tech. (CSE) -UG & PG
1
Dr. S. Udaya
Kumar
UG
Principal
&
Professor
BE
(ECE)
ME,
M.Tech.
(CSE)
2
Dr. S. Nagender
Kumar
UG
Professor
& HOD
B.Tech.
(CSE)
ME
(CSE)
3
Dr. D. Sree Rama
Chandra Murthy
UG
Professor
BE
(ECE)
M.Tech.
(CSE)
4
5
6
Dr.
D.Ratnadeepthi
Dr. G. Venkata
Sudarshan
Acharyulu
Dr. K. Srinivas
Ph.D
(Crypto
graphy)
Ph.D
(Wirele
ss
sensor
networ
k)
Ph.D
(Crypto
graphy)
30
-
-
2/1/2013
07150330103619
13
-
3
22/06/2014
33150331120220
30
-
10
12/6/2014
13150406152951
4.
3
03.06.2013
80150407104358
AMIE
M.Tech
(SE)
Ph.D
(Machi
ne
learnin
g)
7
7
m
o
n
t
h
s
Professor
M.Tech
. (CST)
B.Sc
Ph.D
(CSE)
41
-
1
30/06/2014
Professor
B.E
M.Tech.
Ph.D
15
-
-
01/10/2005
PGCSE
Professor
UG
UG
Signature of Authorized Signatory with date
1070150409144659
40150406-
6
(CSE)
(CS)
151446
7
S.Tirupati Rao
PGCS
Professor
BE
(Civil)
M.Tech
(CSE)
-
14
1
.
6
8
N.Chandrakanth
UG
Professor
B.E
(ME)
M.S
(CS)
-
2
1
7
9
M. Ashwini
UG
Assoc.
Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
-
11
10
M Raja Krishna
Kumar
UG
Assoc.
Prof.
AMIET
E
M.Tech
(IP)
-
6
11
VNLN Murthy
UG
Assoc.
Prof
B.Sc
MCA,
M.Tech.
(CSE)
B.E.
(CSE)
M.Tech.
(SE)
M.Tech
(CS)
12
B.Srinivas
UG
Assoc.
Prof.
13
V.Shivanarayana
Reddy
PGCSE
Assoc.
Prof.
14
A. Sri Lakshmi
UG
15
C. Esther Varma
UG
16
G. Lokeshwari
UG
17
M.Srinivas
UG
18
D.Venkateswarlu
UG
19
N. Swapna
UG
Assoc.
Prof.
B.Tech
(CS&IT
)
B.Tech.
(CSE)
M.Tech.
(CSE)
Assoc.
Prof.
B.Tech.
(IT)
M.Tech.
(SE)
Assoc.
Prof.
B.E
(CS)
Assoc.
Prof.
Assoc
.Prof.
B.Tech.
(CSE)
B.Tech.
(CSE)
Assoc.
Prof
BE
(ISE)
M.Tech.
(CS),
MBA
M.Tech.
(CSE)
M.Tech.
(CS)
M.Tech
(Web
Tech.)
-
-
04/06/2008
-
19/06/2014
-
18/09/2006
-
14/12/2011
-
-
-
05.08.2010
63150331151711
-
5
4
-
22-02-2012
5311150408120936
-
8.5
-
07.06.2013
15150407124108
-
13-06-2013
-
14
-
9
-
-
16-11-2013
2
-
14
11
14
-
-
28/11/2013
-
2/6/2014
-
2/6/2014
13
-
-
11/6/2014
-
Deepa Panse
Ashok
UG
Assoc.
Prof.
B.E.
(CSE)
M.Tech
(SE)
-
13
-
-
16/06/2014
21
A. Lalitha
PGSE
Assoc.
Prof.
B.Tech.
(IT)
M.Tech.
(CSE)
-
6.8
-
-
10/4/2015
22
K.Vijaya Bhaskar
UG
Asst Prof
9
-
-
29-09-2008
S.Ramanjaneyulu
UG
Asst.Prof.
-
7
24
M.Chaitanya
Kishore Reddy
UG
Asst.Prof.
B.Sc
M.Tech.
(SE)
M.Tech.
(SE)
MCA,
M.Tech.
(CSE)
-
23
B.Tech.
(CSE)
B.Tech.
(IT)
-
6
25
Ch. V. Anupama
UG
Asst.Prof.
B.Tech.
(IT)
M.Tech.
(CSE)
-
4
26
Prasada. Preethi
UG
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(Comp.
Eng.)
-
6
27
M.Bhavana
UG
Asst.Prof.
B.Tech
(CSE)
B.Tech.
(CSE)
B.E
(CSE)
B.E.
(IT)
B.Tech.
(CSE)
M.Tech
(CS)
M.Tech.
(CSE)
M.Tech.
(CS)
M.Tech.
(IP)
M.Tech.
(CSE)
29
30
31
P. Haritha
Madhuri Agarwal
Gupta
N. Radhika
Amareswari
G. Lavanya
UG
UG
Asst. Prof.
Asst. Prof.
UG
Asst.Prof.
UG
Asst. Prof.
7268150409124620
12150331122716
4731150408123831
17
20
28
42150406160745
2
12/10/2010
-
16.07.2010
-
4/7/2011
-
27-06-2012
-
03.06.2013
-
-
3.5
1
.
7
-
7
1
7
-
13-06-2013
-
5.6
-
F
-
-
1/8/2013
-
4/12/2013
-
3/11/2014
Signature of Authorized Signatory with date
67150407110820
4275150408123339
72150331132356
53150407102813
86150407105752
53150402115244
0379150410135842
3282150410142657
34150407121537
96150407105619
23150331132018
0002150408112522
5393150409112851
51150407102756
76150406153615
75150406234344
71150406142643
29150331154942
7
B.Tech.
(CSE)
B.Tech.
(CSIT)
B.Tech.
(IT)
B.Tech.
(CSE)
M.Tech.
(SE)
M.Tech.
(SE)
M.Tech.
(CSE)
M.Tech.
(IT)
Asst. Prof.
B.Tech.
(CSE)
UG
Asst. Prof.
UG
Asst. Prof.
32
T. Soumya
UG
Asst. Prof.
33
G. Janardhan
PGSE
Asst. Prof.
34
K. Mounika
UG
Asst. Prof.
35
M. Vamsi
Krishna
PGCS
Asst. Prof.
36
P. Gowtamee
Radha
UG
37
38
Y.V. N. Phani
Kishore
E.
Balakrishnarjuna
Rao
F
-
-
1/12/2014
-
F
-
-
4/12/2014
-
8m
-
-
4/12/2014
-
1
-
-
5/12/2014
M.Tech.
(CSE)
-
6m
-
-
8/12/2014
B.Tech.
(CSE)
M.Tech
.(CNIS)
-
F
-
-
8/12/2014
B.Tech.
(IT)
M.Tech.
(CNIS)
-
F
-
-
8/12/2014
B.Tech.
(CSE)
B.Tech.
(CSE)
M.Tech.
(CSE)
M.Tech.
(SE)
-
3
-
-
4/7/2011
-
1
-
-
4/2/2013
B.Tech.
(IT)
M.Tech.
(CSE)
-
1
-
-
25/11/2013
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(CNIS)
-
F
-
Asst. Prof.
B.Tech.
(CSIT)
M.Tech.
(CSE)
-
8
-
-
6
-
-
8/4/2015
4
-
-
8/4/2015
39
G.Swapna
UG
Asst. Prof.
40
A.Bixapathi
UG
Asst. Prof.
41
M.Sunil Kumar
UG
Asst. Prof.
42
Ch. Bhagyasri
UG
8/4/2015
M. Vijay Bhasker
Reddy
UG
44
P. Swathi
UG
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(CSE)
45
Y. Swathi Teja
UG
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(SE)
46
B. Subba Rao
UG
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(SE)
-
F
-
-
8/4/2015
47
Ch. Vikas
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
-
4
-
-
9/4/2015
48
S. Srija
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
F
-
-
10/4/2015
F
-
-
10/4/2015
43
8/4/2015
-
49
A. Yadagiri
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
50
E. Preethi
UG
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(CSE)
1
-
-
10/4/2015
51
M. Swapna
UG
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(CSE)
F
-
-
11/4/2015
52
B. Manindar
PGSE
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(SE)
53
M. Chitti Babu
UG
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(CSE)
54
MD. Azhar
UG
Asst. Prof.
B.Tech.
(CSE)
M.E.
CSE)
55
G Prasoona
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
-
-
-
-
2.7
11/4/2015
1
-
-
11/4/2015
3.6
-
-
13/04/2015
F
Signature of Authorized Signatory with date
13/04/2015
10150407103153
18150407112023
06150402120742
88150331142803
6957150407224755
11150331124613
19150407111044
93150406152733
41150407152301
7871150408130514
2282150410152320
8451150409123144
5166150411094728
4684150411115713
0724150409154554
0886150411100824
2692150409150316
0108150410145607
3925150411102433
4248150411152817
3929150411154929
1382150411122642
4949150412134753
2492150413-
8
56
H. Swaraj
Bharath
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
57
M.Vishwashanthi
UG
Asst.Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
58
D. Saidamma
UG
Asst.Prof.
B.Tech.
(CSE)
M.Tech.
(SE)
-
-
F
13/04/2015
F
13/04/2015
2
15/04/2015
-
59
P. Deep Lakshmi
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
-
F
-
-
5/5/2015
60
A Nagaraj
Sandeep
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(SE)
-
F
-
-
7/5/2015
61
K. Anusha
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
2
-
-
22/05/2015
62
M. Ravinder
UG
Asst. Pof.
B.Tech.
(CSE)
M.Tech.
(CSE)
7
-
-
15/07/2015
10
-
-
02.06.2010
-
104909
9824150412141713
29150407145103
6599150414125632
1042150505122631
2458150507142727
5041150408142957
8445150409111831
Dept : B.Tech. (IT) -UG & PG
1
Y.Raju
UG
Assoc.Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
-
2
S.Dedeepya
UG
Asst.Prof.
B.Tech.
(IT)
M.Tech.
(CSE)
-
6
-
-
2/7/2009
3
K.Gnana Mayuri
UG
Asst.Prof.
B.Tech.
(CSE)
M.Tech.
(CSE)
-
4
-
-
6/2/2012
4
K. Naresh Babu
PGCSE
Asst.Prof.
B.Tech.
(CSIT)
M.Tech.
(CSE)
-
7
-
-
12/12/2011
5
Y. Siva
UG
Asst.Prof.
B.Tech.
(CSE)
B.Tech.
(CSE)
B.Tech.
(CSE)
B.Tech.
(CSE)
B.Tech.
(CSE)
B.Tech.
(IT)
B.Tech.
(IT)
M.Tech.
(CST)
M.Tech.
(CSE)
M.Tech.
(CSE)
M.Tech.
(CSE)
M.Tech.
(CS)
M.Tech.
(SE)
M.Tech.
(CSE)
2
-
-
01.06.2013
2
-
-
5/10/2013
-
19/06/2014
6
N. Chitra
UG
Asst.Prof.
7
A.Harini Krishna
UG
Asst.Prof.
8
J. Bhanu Sri
UG
Asst. Prof.
9
G. Niveditha
UG
Asst. Prof.
10
N. Archana
UG
Asst. Prof.
11
G. Chandraiah
PGCS
Asst. Prof.
12
K. Srinivas
UG
Asst. Porf.
B.Tech.
(CSE)
M.Tech.
(CSE)
13
Ch Pavani
PGCSE
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(CS)
14
S. Sandeep Babu
UG
Asst. Prof.
B.Tech.
(CSE)
M.Tech.
(IT)
15
Ch. Divya
UG
Asst. Prof.
B.Tech.
(IT)
M.Tech.
(CSE)
-
-
-
2
-
F
-
-
9/12/2014
-
F
-
-
9/12/2014
-
F
-
-
16/12/2014
-
F
-
-
08.07.2010
-
F
-
-
8/4/2015
1
11/4/2015
-
-
1
-
-
F
Signature of Authorized Signatory with date
13/04/2015
11/4/2015
0141150408170937
2340150409145518
04150401143157
1179150409143256
63150401152131
18150407130050
29150407145103
73150407122106
20150401151009
68150401142131
92150407131106
1855150409122257
2369150411115144
1996150413103938
47150404182019
9
Dept : B.Tech. (EEE) - UG & PG
1
Dr. Sudha
Radhika
PGPE
Professor
& HOD
B.Tech.
2
N.Venkata
Bharadwaj
UG
Assoc. Prof
B.E.,
3
G.Srikanth
PGPE
4
D.Radhika
UG
5
K.Mahender
PGPE
Assoc.
Prof.
Assoc.
Prof.
Assoc.
Prof.
6
D. Krishna
UG
Asst. Prof.
B.Tech
7
Voleti Padmaja
UG
Asst. Prof.
B.Tech
8
N.Santhinath
UG
Asst.Prof.
B.Tech
9
Azra Zaineb
UG
Asst. Prof.
B.Tech
10
B.Ramesh Babu
UG
Asst. Prof.
B.Tech.
11
S.Poornachander
Rao
UG
Asst.Prof.
B.Tech.
12
T. Pooja Rani
UG
Asst. Prof.
B.Tech.
13
M. Pradeep
UG
Asst. Prof
B.Tech.
B.Tech
B.Tech
B.Tech
M.Tech.
(PE)
M.Tech.
(EE),
MBA
M.Tech
(PEID)
M.Tech.
(EPE)
M.Tech
(PSE)
M.Tech.
(CS)
M.Tech.
(PE)
M.Tech.
(EPS)
M.Tech.
(EPS)
M.Tech.
(EPE)
M.Tech.
(EPS)
M.Tech.
(EPS)
M.Tech.
(PE)
14
V. Rakesh
UG
Asst. Prof
B.Tech.
M.Tech.
(PE)
15
Manjul Khare
UG
Asst. Prof.
B.E
M.E
(EPS)
Ph.
D
(W
E)
4.
9
1.
6
5
6/8/2014
59150407152918
6
9
-
29/06/2009
43150331153219
10
2
-
01/07/2009
15
-
-
9/6/2014
-
8
-
-
20/04/2007
-
9
-
-
20/04/2007
-
6
-
-
23/06/2008
9
-
-
07.02.2011
5.
5
5.
5
-
-
11/6/2013
5
-
6
-
-
6/6/2014
6
-
-
9/6/2014
-
2.
5
-
6/12/2014
-
-
-
6/12/2014
4.
9
-
-
15/04/2015
-
-
15/03/2014
43150402141645
71150402122058
29150331154942
76150331154808
83150331160330
94150406155313
58150331150657
15150402153209
71150402142931
50150402120740
0248150408111714
60150402144549
088715046101452
Dept : B.Tech. (MECHANICAL) - UG & PG
1
Dr.T.Siva
Prasad
UG
Professor
B.Tech
& HOD
M.Tech.
(D&PE)
2
Dr. S T Raj
Mohan
UG
Professor
, DeanAdmin
MA(Eng
.), MBA
BE
Ph.D
(Ana
lysis
of
Bus.
Proc.
)
Ph.D
(Bus
i.
Man.
)
31
3
4
36
-
11/6/2014
12150402111935
2-Sep-11
26150402142054
84150402135106
3
Dr. S. Ramana
Murthy
UG
Professor
B.Sc
M.Sc.
(Phy.)
Ph.D
(Mat
.
Sci.)
4
Dr. M.
Devaiah
PGMD
Professor
-Exam
I/C
B.E
M. Tech.
(Ind.
Meta.)
Ph.D
(ME
)
15
-
PGMD
Professor B.Tech
M.Tech.
(MD)
-
15
16
2
UG
Professor B.Tech
M.Tech.
(Ind.
Eng.)
AC
MA
3
30
- 16/06/2014
5
6
C. Badari
Narayana
Murthy
S. V.
Gangadharam
41
3
-
- 01/10/2005
41150402133226
82150402163203
Signature of Authorized Signatory with date
2/7/2014
2/6/2014
40150407112250
10
BE
Professor (Mech.
)
Assoc.
B.Tech
Prof.
.
D. Sumuel
John
UG
8
K. Jithendar
Reddy
PGMD
9
Sivananda
Raja
UG
Assoc.
Prof.
BE
10
P. Sudheer
Rao
UG
Assoc.
Prof.
BE
11
R. Sudarshan
UG
Assoc.
Prof.
B.Tech
.
12
B.Anitha
UG
13
P. Srilatha
UG
14
K.Raju
UG
15
K. Vijay
UG
16
M. Ravindra
Gandhi
UG
V. Sandeepa
UG
7
17
18
19
20
V. Rajasekhar
P. Laxmi
Reddy
P.V. R. Girish
Kumar
UG
UG
UG
Asst.
Prof.
Asst.
Prof.
Asst.Prof
.
Asst.Prof
.
B.Tech
B.Tech
.
M.Tech.
(ME)
B.Tech
M.Tech.
(MD)
M.Tech.
(CAD/C
AM)
M.Tech.
(Adv.
Man.
Sys.)
M.Tech.
(Machin
e
Design)
M.Tech.
(AD&M
)
M.Tech
(Therma
l Eng.)
M.Tech.
(CAD/
CAM)
M.Tech.
(CAD/
CAM)
B.Tech
.
Asst.
Prof.
B.Tech
.
Asst.
Prof.
B.Tech
.
Asst.
B.Tech
Prof.
.
Asst.Prof
B.E.
.
Asst.
B.Tech
Prof.
.
Asst.
BE
Prof.
21
N. Rajendar
UG
22
B. Venkat
sravan Kumar
UG
23
U. Sreekanth
UG
Asst.
Prof.
24
B. Bhasker
UG
Asst.
Prof.
B.Tech
25
J. Nithin
Kumar
UG
Asst.
Prof.
B.Tech
.
Professor
B.Sc
(ME)
Asst.
Prof.
M.Tech.
(Ind.
Eng. &
Man.)
M.Tech.
(Ind.
Metal.)
M.S
(Eng. In
IISC)
M.Tech.
(Therma
l Eng.)
M.Tech.
(Prod.
Eng.)
M.Tech.
(CAD/C
AM)
B.Tech
.
B.Tech
.
M.Tech.
(Eng.
Design)
M.Tech.
(
R&AC)
M.Tech.
(The.
Eng.)
M.Tech.
(AMS)
- 15/04/201
7230150414152233
16
7
13
7
1 4/12/2013
98150407144909
13
14
3 25/06/2014
1068150408100413
-
13
5
-
11/6/2015
11150407154923
-
15
1
4 15/06/2015
5980150416122448
-
9
-
- 24/09/2007
52150406154818
3
-
-
49150402125511
4.5
-
- 04.06.2013
2
4
-
13-062013
67150407134025
7
-
-
11/6/2013
82150407154556
4.5
-
-
23-062012
72150402145914
5.5
-
-
1/11/2013
91150402153907
7
-
-
2/6/2014
83150402160738
4.8
-
-
6/9/2014
78150402151212
-
- 11/12/2014
-
-
5
2/7/2012
-
-
5
20150407125625
64150406152621
0542150410115746
5821150411113708
-
F
-
-
3
-
- 10/4/2015
-
8
1
- 13/07/2015
45150404121256
-
4
2
- 26/08/2015
1772150415150036
9/4/2015
Dept : B.Tech. (CIVIL)-UG
1
Dr. R. Ravi
Varma
2
G. R. Ravinder
Reddy
3
P. Jaya Chandra
UG
UG
UG
Professor
Assoc.
BE
BE
13/04/2015
M.S
Ph.D
1
5
5
ME
ME
-
-
-
-
Signature of Authorized Signatory with date
15-04-2015
15-04-2015
5606150413124145
3935150414144910
6789-
11
Reddy
4
Prof.
Assoc.
Prof.
B. Manoj Yadav
150414140706
B.Tech.
UG
5
Abdul Khader
Asst. Prof.
BE
(Civil)
UG
6
7
N. Jnana Dev
Reddy
Asst. Prof.
B.Tech.
UG
G. Nithin Kumar
Reddy
Asst. Prof.
B.Tech.
(Civil)
UG
8
MD Osman Ghani
Asst. Prof.
B.Tech.
(Civil)
UG
ME
(GeoTechnic
al)
ME
(Structu
ral
Eng.)
9
-
1
-
0
-
-
-
-
1
1
11/4/2015
9430150411162038
20-04-2015
7040150420100547
20/04/2015
6575150420113102
1
-
8647050506120656
-
-
M.Sc
(Constr
uctions)
M.Tech
.
(SE&N
DM)
M.Tech
.
(Structu
ral
Eng.)
15/06/2015
-
21/04/2015
-
5131150425153204
Dept: Science & Humanities
PHYSICS:1
Dr. G Neeraja
Rani
2
Dr. J. Anjaiah
UG
Professor
& HOD
B.Sc
M.Sc
Ph.D
2
0
Professor
B.Sc
M.Sc
Ph.D
1
3
Professor
B.Sc
M.Sc
Ph.D
Assoc.
Prof.
B.Sc
M.Sc
-
Asst.Prof.
B.SC
M.Sc
-
9
Asst. Prof.
B.Sc
M.Sc
-
7
Asst. Prof.
B.SC,
B.Ed.
M.SC
-
Asst. Prof.
B.Sc
M.Sc
Asst. Prof.
B.Sc
Ast. Prof.
UG
13
11/6/2014
-
01/10/2005
-
1/7/2014
4
1/8/2013
-
12/8/2011
-
-
1/8/2013
8
-
-
26-09-2013
-
5
-
-
27/10/2014
M.Sc
-
3
-
-
8/12/2014
B.Sc
M.Sc
-
-
-
-
13/04/2015
Professor
B.Sc
M.Sc
Ph.D
-
3
2/7/2014
UG
Professor
B.Sc
M.Sc,
M.Phil
Ph.D
3
6
1
8
-
30/06/2014
-
7/9/2011
-
14/07/2014
-
01/10/2005
-
09/07/2007
UG
3
4
Dr. P.
Mallikarjuna Rao
SK Mahammad
Ali
5
S. Rajesham
6
Ch. Kalyani
7
V. Manjula
8
D. Naveen Kumar
9
T. V. Prashanthi
10
P. B. Padmaja
UG
UG
UG
UG
UG
UG
UG
4
4
1
6
-
-
UG
MATHEMATICS:Dr. K. Narasimha
11
Murty
Dr. Vemula.
12
Suseela Triveni
13
Dr. B Prabhakar
Reddy
UG
Assoc.Prof
B.Sc
M.SC
M.P
hil,
Ph.D
14
Dr. A. Padma
UG
Assoc.Prof
B.Sc
M.Sc,
M.Phil
Ph.D
15
N. Nagi Reddy
UG
Asst. Prof.
B.Sc
M.Sc
-
16
Subhadra Nemani
UG
Asst. Prof.
M.Sc,
M.Ed
17
A. Ramesh
UG
Asst. Prof.
B.Sc,
B.Ed
B.Sc,
B.Ed
M.P
hil
M.P
hil
18
P Sailaja
UG
Asst. Prof.
B.Sc
M.Sc
19
K.Radhika
UG
Asst. Prof.
B.Sc,
M.Sc
M.Sc
1
7
1
5
1
3
1
5
-
-
9
-
-
29-06-2012
-
7
-
-
20-06-2013
-
1.
-
-
8/12/2014
Signature of Authorized Signatory with date
79150401094455
1666150408110342
91150401102600
50150401104829
68150401110844
86150401115402
59150401113548
37150407115447
83150401112328
3568150413102201
15150401133615
01150401134903
90150401140844
74150402165545
91150401145402
98150401144356
07150401141908
35150401150239
26150401-
12
B.Ed
6
20
M. P. Molimol
UG
Asst. Prof.
B.Sc
M.Sc
-
3
-
-
2/2/2015
21
R. Vijaya Sree
UG
Asst. Prof.
B.Sc
M.Sc
-
7
-
-
2/7/2015
22
G.Mahesh
UG
Asst. Prof.
B.Sc
M.Sc
M.P
hil
9
8
-
1/8/2015
-
-
06/08/2007
-
1/12/2009
142951
5725150409111134
8023150414160255
ENGLISH:23
P. Mercy Kavitha
UG
Assoc.Prof.
B.Com
B.Ed
M.A
-
2
0
24
K Arther Paul
UG
Assoc.Prof.
B.A.,
M.A
MBA
M.P
hil
2
0
25
K. Gopalakrishna
UG
Assoc.
Prof.
B.Sc
MA
-
7
18
-
10/7/2013
26
K.Madhumathi
UG
Assoc.Prof.
B.Sc.,
M.A.
2
8
-
-
19/06/2014
27
V. Sreenivasa
Raghava
UG
Assoc.
Prof.
2
6
-
-
26/07/2014
28
G. Karuna
Kumari
UG
3
3
-
-
15/09/2014
29
B.Vanaja Rani
-
23-07-11
30
G. Sunil
-
Assoc.
Prof.
B.SC,
BA,
B.Ed,
BMR
B.Sc,
B.Ed
MA,
M.Ed
M.P
hil
PGD
CA,
PGD
TE
PGD
TE
UG
Asst.Prof.
B.Sc
M.A
-
1
1
UG
Asst. Prof.
BA,
B.Ed
MA
-
4
-
(Ph.D
)
thesis
submi
tted
1
2.
5
-
MA
19-10-2012
31
B. Nagamani
UG
Asst. Prof.
BA
MA
-
4/12/2013
32
Laishram Karuna
Devi
UG
Asst Prof.
BA
MA
1
2
22/07/2015
33
G. Latha Suhasini
UG
Asst Prof.
BA,
B.Ed
MA
1
7
Assoc.
Professor
B.Sc
M.Sc
Ph.D
Asst.Prof
B.Ed
M.Sc.
-
12
Asst.Prof.
B.Sc
M.Sc
-
14
Asst.Prof.
B.Sc
M.Sc
-
7
Asst. Prof.
B.Sc
M.Sc
-
2
Asst. Prof.
B.Sc
M.Sc
-
5.5
-
-
1/7/2013
Asst. Prof.
B.Sc
M.Sc
(Chemi
stry)
-
6.3
-
-
4/9/2014
Asst. Prof.
B.Sc
M.Sc
2
-
-
28/11/2014
Asst. Prof.
B.Sc
M.Sc
1.4
Asst. Prof.
B.Sc
M.Sc
-
1
-
6/12/2014
B.Sc,
M.Sc.
(Che.)
5.5
-
-
8/12/2014
-
31/07/2015
76150401121349
4669150409111810
88150404122409
46150401123623
5610150409103858
97150401130043
8095150409101718
9157150408114007
58150401124911
90150331131344
CHEMISTRY:UG
34
Dr. J. V. Madhuri
35
P.Sreedhar
36
K.Shasikala
37
Vem Mamatha
Bethapudi
38
M. Raju
39
J. Bhargavi
Lakshmi
40
K. Sudhakar
41
M. Murali
42
B. Janaki Rani
43
A. Renuka
UG
UG
UG
UG
UG
9
UG
-
6/7/2015
-
29/07/2009
-
-
13.06.2012
-
-
15.06.2012
-
20-10-2012
UG
UG
UG
5/12/2014
6552150408173730
84150402105725
54150402101940
08150402104600
24150402102903
96150402100905
75150402173219
3623150409120904
84150402171318
01150402095720
ENVIRONMENTAL SCIENCE & OTHERS:44
K. Swarupa
UG
Asst. Prof.
-
Signature of Authorized Signatory with date
15150402-
13
B.Ed
45
S.Kameswara Rao
UG
46
S. Sippora
UG
47
Y.Amarnadh
Reddy
UG
Asst. Prof.
/Sr.Libraria
n
Asst. Prof.
/Sr.Libraria
n
-
-
M Li Sc
-
1/10/2005
-
13-08-2007
-
22.11.2010
15
B Li Sc
B. Li.Sc
M.Li.Sc
-
PD
B.Com
M.A.
M.P.Ed
-
13
-
15
172252
1185150410154249
4181150415152826
52150407113402
Dept:MBA
1
A.I.Prasanth
PG
Assoc.Prof
B.B.M
MBA
ML
TG
8
6
-
19/02/2007
2
Kalyan Jyothi
PG
Asst.Prof
B.Tech
MBA
-
7
-
-
5/10/2009
3
APS Jyothi
PG
Asst.Prof.
B.Com
MBA
-
5.
5
-
-
18.05.2011
4
P.Upender
PG
Asst.Prof.
B.Com
MBA
-
7
-
-
13.06.2012
5
K. Naupal Reddy
PG
Asst. Prof.
B.Com
MBA
-
6
-
5/7/2012
6
V. Shravani
PG
Asst. Prof.
B.Com
MBA
-
1
-
-
9/4/2015
7
T. Abhilash
PG
Asst. Prof.
B.Tech.
MBA
-
1
-
-
5/6/2014
8
Neha Singh
PG
Asst. Prof.
B.Sc
MBA
-
5
-
-
10/4/2015
62150402172853
93150402105000
50150402135250
41150402130537
15150402124128
9339150409120804
1130150415113155
7850150414133152
Permanent Faculty: Student Ratio : 1:15 (UG) and 1:12(PG)
* Number of faculty employed and left during the last three years :
Period of appointment
Between Between
S. No.
Programme
Category
Less than
More than
6 Months 2 to 3
6 Months
3 years
to 2 years years
UG & PG
1
(B.Tech) &
Professors
0
17
4
8
M.Tech
Associate
5
21
9
15
Prof.
12
82
20
35
Assistant Prof.
Others
PG (MBA)
Professors
Associate
Prof.
Assistant Prof.
Others
Total
29
50
149
Nil
Nil
Nil
Nil
Nil
NIL
Nil
Nil
01
0
Nil
Nil
Nil
01
1
Nil
Nil
3
Nil
2
Nil
2
Nil
7
Nil
Signature of Authorized Signatory with date
14
VII. PROFILE
OF DIRECTOR/PRINCIPAL WITH QUALIFICATIONS, TOTAL EXPERIENCE, AGE AND
DURATION OF EMPLOYMENT AT THE INSTITUTE CONCERNED
Dr. Udaya Kumar Susarla
Principal, Geethanjali College of Engineering and Technology,
Formerly Principal, MVSR Engineering College, Nadergul, Hyderabad;
Formerly Deputy Director, SNIST;
Formerly Principal, Aurora’s Engineering College, Bhongir.



Professional teaching experience of more than 28 years in New Zealand, Morocco, Ethiopia, and in
India.
Doctor Philosophy, Computer Science and Engineering, Jawaharlal Nehru Technological University,
Hyderabad.

Master of Technology (Hons.), Information Engineering, Massey University, Palmerston North, New
Zealand.
Master of Engineering, Electronics & Communication Engineering with specialization in “Digital
Systems”, University College of Engineering, Osmania University, Hyderabad.
Bachelor of Engineering, Electronics & Communication Engineering, University College of
Engineering, Osmania University, Hyderabad.
Published forty three research papers in International Refereed Journals.

Reviewer for the following International journals:


 “Journal of Information Privacy and Security”, USA
 “International Journal of Network Security”, Taiwan.
 “IAENG International Journal of Computer Science”, Hong Kong.
 Indian Journal of Science and Technology, India.

Research interests include "Cryptography, Image Processing, Genetic Algorithms, and Digital Testing".

Two Research Scholars submitted their Doctoral Thesis.

Two Research Scholars are actively working towards their Doctoral Program

Adjudged as the Best Teacher in SNIST on more than five occasions.

Teaching interests include "Data Communications, Computer Networks, Cryptography, Network
Security, Switching Theory, Digital System Design, Computer Architecture, Operating Systems, and
Electronic Circuits".

Master Trainer for NBA on the new Outcome Based Accreditation.
VIII. FEE
Details of fee, as approved by State fee Committee, for the Institution.
Rs.67,500/Time schedule for payment of fee for the entire programme.
At the time of admission.
No. of Fee waivers granted with amount and name of students.
NIL
Signature of Authorized Signatory with date
15
Number of scholarship offered by the institute, duration and amount.
Merit scholarship of an amount Rs.10,000/- each is awarded for 9 students from CSE, IT, ECE, EEE,
ME & MBA of Ist Yr & II & III, IV Yr.
Criteria for fee waivers/scholarship.
NA
Estimated cost of Boarding and Lodging in Hostels : NO HOSTEL FACILITY
IX.
9.1
ADMISSION
Number of seats sanctioned with the year of approval.
Sanctioned for the
Academic year
2005-06
2006-07
2007-08
2008-09
2009-10
2010-11
2011-12
2012-13
2013-14
2014-15
2015-16
9.2
Under Graduate (B.Tech.)
CSE
ECE
EEE
60
60
120
120
120
120
120
180
240
240
240
60
60
120
120
120
120
120
180
240
240
240
60
60
60
60
60
60
60
60
60
60
60
MECH
IT
60
60
60
120
120
120
120
120
120
-
Post Graduate
CIVIL
60
60
60
120
180
120
MCA
MBA
-
60
60
60
60
60
60
60
60
60
60
120
120
60
60
60
60
60
-
M.Tech
36
54
90
150
168
U.P
Number of students admitted under various categories each year in B.Tech., MBA & MCA.
COLLEGE IS ESTABLISHED DURING THE ACADEMIC YEAR 2005-06.
S.
No
Year of
Admissio
n
CSE
CQ
MQ
ECE
CQ
MQ
EEE
CQ MQ
CQ
1
2005-06
51
9
51
9
2
2006-07
48
12
48
12
47
3
2007-08
93
27
93
27
4
2008-09
90
30
90
5
2009-10
84
36
6
2010-11
84
7
2011-12
8
IT
MQ
NIL
40
9
12
48
12
44
12
47
13
30
45
15
90
83
36
42
18
36
84
36
42
84
36
84
36
2012-13
122
52
126
9
2013-14
157
67
10.
2014-15
161
11.
2015-16
168
MECH.
CQ MQ
CIVIL
CQ MQ
MCA
MQ
CQ
-
-
-
12
47
12
46
14
45
15
30
44
16
45
15
80
33
41
03
42
18
18
83
36
34
02
41
18
42
18
78
36
39
18
6
1
38
15
54
42
13
82
34
41
17
-
-
38
7
162
41
39
5
44
10
81
29
-
-
37
7
71
163
71
33
07
-
-
64
30
59
17
-
-
35
18
72
168
72
38
18
-
-
79
35
74
16
-
-
CQ
-
Signature of Authorized Signatory with date
MBA
MQ
UP
16
9.3 Number of students admitted under various categories each year in M.Tech.
S.
No
Year of
Admission
CQ
1
2010-11
2
ECE
ES
VLSI
CSE
MQ
CQ
MQ
CQ
MQ
CQ
5
6
10
5
-
-
2011-12
7
-
11
5
-
3
2012-13
12
1
12
5
4
2013-14
13
3
19
5
2014-15
13
1
21
CS
SE
MQ
CQ
-
-
-
-
-
12
6
-
12
-
12
6
8
13
5
21
7
10
5
20
6
MQ
CQ
MD
PE
MQ
CQ
MQ
-
-
-
-
-
-
-
-
-
12
6
-
-
-
2
13
-
11
-
12
1
-
4
9
1
6
3
6
-
12
-
CQ
MQ
-
-
-
-
-
2
UP
9.4
Number of applications received during last five years for admission under
Management Quota and number admitted :–
Details
No. of
applications
received
No. of
Admissions
made
X.
2011-12
2012-13
2013-14
2014-15
2015-16
342
350
405
215
225
171
195
178
196
213
Admission Procedure
10.1
Name and address of the Test Agency and its URL (website) :Type Of Test : EAMCET, ECET & ICET.
Test Agency : ANDHRA PRADESH COUNCIL OF HIGHER EDUCATION.
URL
:
www.apsche.org
10.2
Number of seats allotted to different Test Qualified candidates separately
[AIEEE/CET (State conducted test/University tests)/Association conducted test]
Details in section 9.2
10.3
Calendar for admission against management/vacant seats :70% Seats are allotted through the entrance exams conducted by the State Government i.e.,
EAMCET, ICET & ECET and the remaining 30% seats are allotted by Management base on the
merit of the students applied for management quota seats.
APSCHE on behalf of state Government of Andhra Pradesh decides the schedule for conducting
entrance exam for convener quota seats and announces the calendar for management quota seats. The
seats allotted by the Management are scrutinized and approved by APSCHE and JNTU.
Signature of Authorized Signatory with date
17
XI.
CRITERIA AND WEIGHTAGES FOR ADMISSION
As per the rank obtained in the EAMCET / ECET / ICET.
11.1
Minimum level of acceptance :
40 out of 160 marks in EAMCET conducted by State Government
60 out of 200 marks in ECET conducted by State Government
40 out of 160 marks in ICET conducted by State Government
This is amended time to time by the State Government.
In case of Management seats, the Government specified that the candidates shall qualify the
EAMCET exam or obtain 50% marks in qualifying exam.
XII.
APPLICATION FORM
Available in Website
XV.
INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE
15.1
LIBRARY :Number of Library books/Titles/Journals available (Programme-wise)
Courses
No. of Titles
No of Volumes
CSE
1054
5375
National
24
IT
866
3718
6
ECE
917
5212
24
EEE
552
2917
6
MECH
262
1948
12
CIVIL
58
567
12
MBA
485
3374
12
M.Tech- ECE
125
544
5
M.TechEmbedded
Systems
M.Tech.VLSI
M.Tech.-CSE
140
539
5
65
360
5
74
411
5
M.Tech.-CS
57
334
5
M.Tech
Software
Engineering
M.Tech.Machine
Design
M.Tech.Power
Electronics
77
323
5
60
253
5
29
92
5
Journals
International
8 (reprint)
Signature of Authorized Signatory with date
18
Total
5135
136
29100
List of online National/International Journals subscribed. : E-Library facilities :
15.2
IEEE
Available
LABORATORY
For each Laboratory
List of Major Equipment / Facilities : (ANNEXURE 1)
List of Experimental Setup
15.3
: (ANNEXURE 2)
COMPUTING FACILITIES :
e:
Computer Facilities for the existing programmes:
Particulars
Available
Specifications
No.of Computer terminals
926
P-IV Dual Core
No.of terminals of LAN/WAN
800
Relevant Legal Software
45
P-IV Dual Core
MSDN(Microsoft
Volume Licensing
Service Centre)
Peripheral(s) / Printers
Internet Accessibility (in mbps &
hrs)
32
SAMSUNG ML -1610
36
Wi Fi connectivity to the campus
5
MBPS
Available in Library &
Seminar
Major software packages available
: Microsoft Academic Alliance
Kit (Including all major OS),
TURBO C++, MS-OFFICE TOOL
KIT, RED HAT
LINUX, JAVA, WIN XP 2007.
MS VISUAL STUDIO
Special purpose facilities available
: YES (E-CLASS ROOM)
15.4 WORKSHOP :
- Carpentry shop
- Fitting Shop
- House Wiring shop
- Metal forming shop
15.5 List of facilities available :Games and Sports Facilities :- Cricket, Volley Ball, Basket Ball, Carroms, Chess, Table Tennis etc.
Signature of Authorized Signatory with date
19
Extra Curriculum Activities :- In addition to the academic activities such as mini projects, paper
presentations, student seminars, number of other recreational activities are conducted through
“Fine Arts Club” “Debating Club” Music Group etc.,
Soft Skill Development Facilities : - A Centre ‘CACHE’ is established in the very first year through
which a number of activities are organized to improve the soft skills of the students. Public speaking, paper
presentation, group discussions, student seminars etc are conducted through this centre. Further two state of
the art multimedia communication skills labs have been established with advanced software and interactive
platforms to enhance the communication skills of the students.
15.6
Number of Classrooms and size of each:
S. No
1
2
3
4
5
6
7
8
9
10
11
Name of the
Course
MBA
CSE & IT
Name of the
laboratory/workshop
C/C++,Co,
Ms Office, UML
Informatica, DBMS lab
COBOL
C/C++ & DS Lab
Multimedia & Web
Technologies Lab
IT workshop
Unix & Networking Lab
Sun Micro systems Lab(Java)
Net lab
Electronic Devices & circuits
Lab-I
Total Area
of
lab/worksho
p
195 Sq.Mtrs.
195 Sq.Mtrs.
195 sq mts
195 sq mts
250 Sq Mtrs
167 Sq Mtrs
84 Sq.Mtrs
250 Sq Mtrs.
105 Sq Mtrs
167 Sq Mtrs
116 Sq.Mtrs
ECE
12
Electronics circuits lab
116 Sq.Mtrs
13
Pulse & Digital circuits
116 Sq.Mtrs
14
Analog Communication lab
105 Sq.Mtrs
15
Digital Communication lab
105 Sq.Mtrs
16
Linear IC Applications
105 Sq.Mtrs
ECE
Major equipment
30 computers
30 computers
30 computers
30 computers
60 computers
30comptuers
30 Computers
64computers
30 computers
30 computers
Cathode Ray Oscilloscopes
-12
Regulated power supply 15
Function generators – 10
Digital Multimeters -12
Cathode Ray oscilloscopes
– 10
DC regulated power
supply-10
Function generators 10
Cathode Ray oscillo scopes
– 10
DC Regulated power
supply -10
Function generators – 10
Digital multimeters -10
CRO, Function generator
power supply
CRO, Function generator
power supply
Cathode Ray oscillometers
– 10
DC regulated power
supply-10
Function generators - 10
Signature of Authorized Signatory with date
20
17
Micro processors lab
76 Sq.Mtrs
18
Electronics Computer Aided
design
105 Sq.Mtrs
19
Microwave & Optical
communications lab
105 Sq.Mtrs
21
Digital signal processing lab
105 Sq.Mtrs
22
Embedded systems lab
116 Sq.Mtrs
23
Workshop
266 Sq.Mtrs.
24
25
EM Lab
ET Lab
250 Sq.Mtrs.
26
BEE LAB
27
28
29
Control Systems lab
Electrical circuits lab
ECA, ET lab
105 Sq.mtrs
105 Sq.mtrs
30
Simulation Lab
84 Sq.Mtrs
EEE
15.7
31
32
S&H
HHM Lab
Eng &Language Comm. Lab-I
250 Sq.Mtrs
85 Sq.Mtrs
33
S&H
Eng &Language Comm. Lab-I
250 Sq.Mtrs
8086 kits – 11
8051 kits-11
Interfacing kits – 04
Power supply - 12
ALS-SDA-CPLD/FPGA01
Universal/CPLD/FPGAT/
K -10
FPGAXC 3550 module
(XILINX) NV RoM – 10
Kly stron power supply –
02
Kly stron 2k25 – 02
Gunnoscillators -02
Pin Modulator – 02
Gum power supply – 01
Laser diode kits – 02
Fiber optic analog kits – 02
Fiber optic digital kits 02
Digital signal processor
kits – 05 (5416)
Digital signal processor
kits – 10 (6713)
MAT LAB soft ware – 15
users
Computers - 31
Embeded systems
evaluation boards – 5
Power supply AVR kits05, Computers - 30
Welding, fitting, house
wiring, tinsmithy,
blacksmithy
DC Motors
AC and DC motors &
transformers
Circuits and DC / DC
Machines
Electrical kits, mat lab
Power supply (5V, 1.5A 
12V, 100 mA) -10
RLC series circuit,stability
analysis
30 computers with head
phones
60 computers with head
phones
Central Examination Facility, Number of rooms and capacity of each.
-
1 Drawing Hall of 60 capacity
Signature of Authorized Signatory with date
21
-
- 42 Lecture halls with 60 capacity
21 Tutorials with 30 capacity.
6 Seminar halls
15.8 Teaching Learning process
: The teacher learning process is effective as student centric
methodology is being adopted. All the classrooms are provided with overhead projector facilities.
Teachers are encouraged to use Audio Visual Aids so that the learning process is effective.
15.9
Curricula and syllabi for each of the programmes as approved by the University. :
: being followed
15.10 Academic Calendar of the University
: (ANNEXURE -3)
15.11 Academic Time Table
: As suggested by JNTU
15.12 Teaching Load of each Faculty
: The faculty is given the teaching load as
per the norms prescribed by JNTU.
.
15.13 Students’ assessment of Faculty, System in place. : Continuous Feed back is taken from the
students periodically and faculty is advised to improve their performance to make the teaching –
learning more effective
15.14 POST GRADUATE PROGRAMMES
Title of the programme :
MBA & M.Tech.
List of typical research projects.
Industry Linkage
:
LIDAR Project of Rs.34.58 lakhs approved by Department
of Science & Technology (DST), New Delhi
: SQL STAR, OSI-TECHNOLOGIES, Cordys, Sunmicrosystems.
Publications (if any) out of research in last three years out of masters projects
: NIL
Admission procedure
: Through convener, ICET/GATE
Fee Structure
: will be updated soon for Convenor Quota & Management quota.
Title of the Programme
: M.Tech
Curricula & Syllabi
: Annexure
Faculty Profile
: As in section 6.1 of this report
Hostel Facilities
: not available.
Laboratory facilities exclusive
to the M.Tech Programme: Annexure
Contact address of co-ordinator of the PG programme
Name
: Dr.D.S.R.Murthy
Address
: Professor, GCET
Telephone
: 040-32519687
E-mail
: info@gcet.edu.in
Signature of Authorized Signatory with date
22
15.15. Placement Details : Annexure-3
ANNEXURE-1
List Of Equipment/Facilities
. Laboratories/Work Shop - Equipment
Number
Availabl
e
Sl.N
o.
Dept.
1
CSE
CN & OS through Linux,
DBMS Lab
HP-Processor 3.00 GHz, 2GB RAM,
320 GB HDD
20
2
CSE
CT & ST Lab, WT Lab
HP-pro 3005 MT, Processor 3.00 GHz,
2GB RAM, 320
20
3
CSE
CT & ST Lab, WT Lab
HP-pro 3005 MT, Processor 3.00 GHz,
2GB RAM, 320
20
4
CSE
Case Tools and Software
Testing Lab
Dell Optiplex 330 system
20
5
CSE
Linux and Data Mining Lab
Dell Optiplex 330 system
20
6
CSE
Computer Programming Lab
Thin Clients (keyboard, mouse,BLX+)
20
7
CSE
Computer Programming Lab
Thin Clients (keyboard, mouse,BLX+)
20
8
CSE
Computer Programming Lab
Thin Clients (keyboard, mouse,BLX+)
20
9
CSE
CN Lab
HP-160GB/15.5" LCD
32
10
CSE
Java Lab
Pentium-IV
30
11
CSE
UPS
1
12
CSE
UPS
1
13
CSE
Computer Programming Lab
UPS
1
14
CSE
CT & ST Lab, WT Lab
UPS
1
15
CSE
computer centre
HPDx3090
70
16
CSE
Computer Centre
UPS
1
17
CSE
Server Room
Systems
13
18
CSE
Server Room
UPS
1
19
CSE
System
1
20
CSE
Television Set
1
21
CSE
Web Cam
1
22
ECE
Cathode ray Oscilloscope
16
Name of the Laboratory
English Language
Communication Skills Lab
Case Tools and Software
Testing Lab
English Language
Communication Skills Lab
English Language
Communication Skills Lab
English Language
Communication Skills Lab
IC APPLICATIONS LAB
Name of the Equipment Machinery
Signature of Authorized Signatory with date
23
23
ECE
IC APPLICATIONS LAB
DC Regulated power supply
24
24
ECE
IC APPLICATIONS LAB
Function Generator
15
25
ECE
IC APPLICATIONS LAB
DRB, DCB, DLB
60
26
ECE
IC APPLICATIONS LAB
IC Tests, trainer kits & Digital
multimeres
30
Cathode ray Oscilloscope -(0-30 MHz,
0-20 MHz
16
DC Trainer kits
22
Visual Spce Simulation S/W
15
Function Generator
10
EC trainer kits
14
AC Trainer Kits
26
Digital Storage
1
Microwave bench setup
6
Optical Communication Kits
9
Computer Systems
20
Computer systems
20
TMS3205416 Kits
5
LAN Trainer kit
1
Optical Fiber trainer kit
1
DIGITAL
COMMUNICATIONS /
ANALOG
COMMUNICATIONS
DIGITAL
COMMUNICATIONS /
ANALOG
COMMUNICATIONS
DIGITAL
COMMUNICATIONS /
ANALOG
COMMUNICATIONS
DIGITAL
COMMUNICATIONS /
ANALOG
COMMUNICATIONS
DIGITAL
COMMUNICATIONS /
ANALOG
COMMUNICATIONS
DIGITAL
COMMUNICATIONS /
ANALOG
COMMUNICATIONS
DIGITAL
COMMUNICATIONS /
ANALOG
COMMUNICATIONS
Microwave & Optical
Communications
Microwave & Optical
Communications
27
ECE
28
ECE
29
ECE
30
ECE
31
ECE
32
ECE
33
ECE
34
ECE
35
ECE
36
ECE
37
ECE
38
ECE
39
ECE
40
ECE
41
ECE
Embedded Systems Lab
8051 trainer kits
10
42
ECE
Embedded Systems
ARM7 kits
6
43
ECE
Embedded Systems
PSOC Kits
10
Embedded Systems Lab
Advanced Digital
Communications
Advanced Digital
Communications
Advanced Digital
Communications
Advanced Digital
Communications
Signature of Authorized Signatory with date
24
44
ECE
Embedded SystemsUni-57
SDK 89x51 kits
UN:-57SDK89x51 kits
7
45
ECE
EDC / PDC LAB
Oscilloscope
16
46
ECE
EDC / PDC LAB
D.C.Regulated
20
47
ECE
EDC / PDC LAB
Power Supply Function generator
30
48
ECE
EDC / PDC LAB
EDC trainer kits
10
49
ECE
DSP Lab
Computer Systems
32
50
ECE
DSP Lab
DSP Starter kit TMS 320C6713
18
51
ECE
DSP Lab
MAT Lab S/W
15
52
ECE
DSP Lab
Signal Processing Toolbox
15
53
ECE
Computer Systems
32
54
ECE
8086 Trainer Kits
14
55
ECE
8051 trainer kits
16
56
ECE
ECAD & VLSI Lab
Computer Systems
32
57
ECE
ECAD & VLSI Lab
CPCD/FPGA J/K
10
58
ECE
ECAD & VLSI Lab
Xilinx s/w 9.2IV
15
59
ECE
DSP Lab
Communications Toolbox
15
60
ECE
DSP Lab
Filter Design Tool box
15
61
ECE
DSP Lab
Fixed point tool box
15
62
ECE
Micro Processor & Micro
Controller Lab
Interfacing kits
41
63
ECE
Lidar Lab
Laser source
1
64
ECE
Lidar Lab
Photo Detection Systems
1
65
ECE
Lidar Lab
Computer Systems
2
66
ECE
Lidar Lab
Telescope
1
67
ECE
Lidar Lab
Laser Source
1
68
ECE
Lidar Lab
Laser Source Equipment
1
69
ECE
MAD LAB
HP Pro3005 MT, Processor 3.00GHz,
ZGB RAM, 320 GB
20
70
ECE
DSP Lab
UPS
1
71
ECE
Embedded Systems Lab
UPS
1
72
ECE/C
SE
Projects Lab
Dell Optiplex 330 system
10
MicroProcessor & Micro
Controller Lab
Microprocessor & Micro
Controller Lab
Microprocessor & Micro
Controller Lab
Signature of Authorized Signatory with date
25
73
EEE
ELECTRICAL MACHINES -I
DC shunt generator coupled to DC
Motor
1
74
EEE
ELECTRICAL MACHINES I
DC shunt motor with Brakedrum
1
75
EEE
ELECTRICAL MACHINES -I
DC Rectifier
1
76
EEE
DC 3 point starter
3
77
EEE
Single phase Resistive load
3
78
EEE
ELECTRICAL MACHINES -I
79
EEE
ELECTRICAL MACHINES -I
80
EEE
ELECTRICAL MACHINES -I
81
EEE
ELECTRICAL MACHINES -I
82
EEE
83
EEE
84
EEE
85
EEE
86
EEE
87
EEE
88
EEE
89
EEE
90
EEE
91
EEE
92
EEE
93
EEE
94
EEE
95
EEE
96
EEE
97
EEE
ELECTRICAL MACHINES I
ELECTRICAL MACHINES I
ELECTRICAL MACHINES
LAB -II
ELECTRICAL MACHINES II
ELECTRICAL MACHINES II
ELECTRICAL MACHINES II
ELECTRICAL MACHINES II
ELECTRICAL MACHINES
LAB - II
ELECTRICAL MACHINES
LAB -II
ELECTRICAL MACHINES II
ELECTRICAL MACHINES II
CONTROL SYSTEM LAB &
POWER ELECTRONICS
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONIC
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
CONTROL SYSTEM LAB &
POWER ELECTRONIC LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONIC
LAB
ELECTRICAL MACHINES
LAB -II
MC voltmeters, MC Ammeters,
Rheostats
DC shunt motor with DC series
generator
DC series motor with DC series
generator
DC shunt motor with DC compound
motor
DC shunt motor coupled to 3 phase
alternator
12
1
1
1
1
Single phase 1 KVA transformer
2
Single Phase 1 KVA transformer
1
3 Phase Auto transformer
1
3 phase Auto Transformer
1
MI Voltmeters/ UPF Watt meters,
Digital tachometer
48
3 phase synchronous motor
1
3 phase slipring Induction motor
1
Single Phase IM WITH STARTER
1
Syncho Transmitter and Reviewer kit
1
P,DD,PID Controller
1
Lag & Head compensation kit
1
Magnetic Amplifier
1
Time response of second order system
1
PLC Kit
1
Power Fonter meter Frequency meter
3
Signature of Authorized Signatory with date
26
98
EEE
99
EEE
100
EEE
101
EEE
102
EEE
103
EEE
104
EEE
105
EEE
106
EEE
107
EEE
108
EEE
109
EEE
110
EEE
111
EEE
112
EEE
113
EEE
114
EEE
115
EEE
116
EEE
117
EEE
118
EEE
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL
TECHNOLOGY LAB
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
CONTROL SYSTEM LAB &
POWER ELECTRONICS
LAB
DC shunt generator coupled to DC
motor
1
DC shunt motor with 3 phase alternator
1
single phase 3 KVA transformer
1
DC 3 point starter
4
single phase Resistive load
1
MC ammeters
35
Rheostats
12
Analog Tachometer
2
DC Compound motor with Brake drum
1
Digital Multimetes
10
Rheostats
6
Single phase Auto Transformer
2
Regulated power supply
12
Digital Voltmeter
35
Digital Ammeter
70
Decade Resistance box
10
Decade Inductance box
10
Function Generator
5
Oscilloscope
3
Oscilloscope
3
SCR, MOSFET, IGBT kit
1
Signature of Authorized Signatory with date
27
119
EEE
120
EEE
121
EEE
122
EEE
123
EEE
124
EEE
125
EEE
126
EEE
127
EEE
128
EEE
129
EEE
130
EEE
131
EEE
132
EEE
133
EEE
134
EEE
135
EEE
136
EEE
137
EEE
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
CONTROL SYSTEM LAB &
POWER ELECTRONICS
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONIC
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONIC
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
CONTROL SYSTEM LAB &
POWER ELECTRONICS
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONIC
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
CONTROL SYSTEM LAB &
POWER ELECTRONIC LAB
CONTROL SYSTEM LAB &
POWER ELECTRONICS
LAB
CONTROL SYSTEM LAB &
POWER ELECTRONICS
LAB
CONTROL SYSTEMS LAB
& POWER ELECTRONICS
LAB
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
Gate Firing circuit kit
1
Effect of Feedback on PC servomotor
1
Transfer function of DC shunt motor
1
OP-AMP Kit for TF
1
Characteristics of AC Servomotor ki
1
Single phase AC voltage controller
1
Single phase fully bridge connerter
1
Forred Communication Circuits
1
DC Jomes Chopper
1
Single phase parallel Innerter
1
Single phase cyclo connerters
1
single phase Half controlled converter
1
Single phase Bride Innerter
1
Power scope
1
10:1 probe for high voltage
measurement
3
callibration and testing of single phase
energy me
1
Callibration of dynamometer PF meter
1
Crompton DC potentiometer
1
Measurement of a 3 phase reactive
power
1
Signature of Authorized Signatory with date
28
MEASUREMENTS
138
EEE
139
EEE
140
EEE
141
EEE
142
EEE
143
EEE
144
EEE
145
EEE
146
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
ELECTRICAL CIRCUITS
LAB & ELECTRICAL
MEASUREMENTS
measurement of a choke coil
1
Measurement of % ratios and phase
angle error of a
1
Kelvin's double bridge
1
Schering bridge & Andrsons bridge
1
Relay Testing kit
1
Callibration of LPF wats meter
1
H.V. oil testing kit 60 KVA
1
Simulation Lab
Computers
30
EEE
Simulation Lab
Hard Disk
1
147
EEE
Simulation Lab
RAM
2
148
EEE
Simulation Lab
Motherboard
1
149
EEE
Simulation Lab
Furniture
1
150
EEE
Simulation Lab
Printers
1
151
EEE
FMHM Lab
152
EEE
FMHM Lab
153
EEE
FMHM Lab
Impact of jets on vawes
1
154
EEE
FMHM Lab
Performance test on petton unhead
1
155
EEE
FMHM Lab
Performance test on Francis Turbine
1
156
EEE
FMHM Lab
157
EEE
FMHM Lab
158
EEE
FMHM Lab
159
EEE
FMHM Lab
Determination of Friction factor
apparatus
Determination of loss of head due to
sudden contra
Performance test on single stage
centrifugal pump
Performance test on multistage, multi
speed centri
Performance test on reciprocating
pump
Callibration of venturi meter and
orifice meter
Signature of Authorized Signatory with date
1
1
1
1
1
1
29
160
IT
Web Technology Lab
Dell Optiplex 330 system
20
161
IT
OOPS Lab
ARM-II processor with 800 mHz,
128MB RAM, 128 MB
20
162
IT
Thin Clients (keyboard, mouse,BLX+)
40
163
IT
Thin Clients (keyboard, mouse,BLX+)
40
164
IT
IT Workshop Lab
Thin Clients (keyboard, mouse,BLX+)
20
165
IT
CN Lab
UPS
1
166
MCA
Operating Systems and
Computer Networks Lab
Dell Optiplex 330 system
20
167
MCA
OS Lab
HP-160GB HD/1GB RAM/HP DX
2080 MT/15.5" LCD MONITO
32
168
ME
Mechanics of Solids Lab
Universal Testing Machine
1
169
ME
Mechanics of Solids Lab
Shear Test Attachment
1
170
ME
Mechanics of Solids Lab
Spring Testing Machine
1
171
ME
Mechanics of Solids Lab
Rockwell cum Brinnel hardness
1
172
ME
Metzer Trinocular meta Microscope
1
173
ME
Metzer-M
5
174
ME
Colour image capture system
1
175
ME
Specimen cutting machine
1
176
ME
Muffel furnance
1
177
ME
Double Disc polisher
1
178
ME
Belt Grinder
1
179
ME
Mounting Press
1
180
ME
Uncounted specimens
1
181
ME
Standard Metallographic specimens
1
182
ME
Jomminy Quench machine
1
183
ME
Hot Air Oven
1
184
ME
Specimen Leveler
1
185
ME
Engineering Workshop
Bench Drilling Machine
1
186
ME
Engineering Workshop
Black Smithy Chimney
1
Data Structures through C++
Lab
DS through c++ Lab & Data
Mining Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Metallurgy & Material Science
Lab
Signature of Authorized Signatory with date
30
187
ME
Engineering Workshop
Electrical Blower
1
188
ME
Engineering Workshop
Anvil
4
189
ME
Engineering Workshop
Bench voices
12
190
ME
Engineering Workshop
Hack saw Machine
1
191
S &H
IT WORKSHOP
HARDWARE LAB
MSI ntel MotherBoard, Intel Processor,
40GB HDD,
20
192
S &H
English Lab
LG-Dual Core
20
193
S &H
English Lab
LG- Dual Core
20
194
S &H
DC shunt motor with brake drum
1
195
S &H
3 phase squirrel cage IM with Brake
drum
1
196
S &H
single phase 2 KVA Transformer
2
197
S &H
DC 2 point starter
1
198
S &H
single phase Auto Transformer
2
199
S &H
MC voltmeter, Ammeter
50
200
S &H
Direct online starter
2
201
S &H
LG Systems
30
202
S &H
UPS
1
203
S&H
English Lab
LG-Dual core
20
204
S&H
Engineering Physics Lab
Spectrometer
4
205
S&H
Engineering Physics Lab
Travelling Microscope
4
206
S&H
Engineering Physics Lab
Stewart & Gee's app
4
207
S&H
Engineering Physics Lab
Meldes App
4
208
S&H
Engineering Physics Lab
Energy gap of a Semiconductor with
thermometer
4
209
S&H
Engineering Physics Lab
LCR Circuit kit, Signal Generator
4
210
S&H
Engineering Physics Lab
RC Circuit Kit
4
211
S&H
Engineering Physics Lab
Optical fiber kit
4
212
S&H
Engineering Chemistry Lab
Conductivity Meter
5
213
S&H
Engineering Chemistry Lab
Potentiometer
5
BASIC ELECTRICAL
ENGINEERING LAB
BASIC ELECTRICAL
ENGINEERING LAB
BASIC ELECTRICAL LAB
BASIC ELECTRICAL
ENGINEERING LAB
BASIC ELECTRICAL
ENGINEERING LAB
BASIC ELECTRICAL
ENGINEERING LAB
BASIC ELECTRICAL
ENGINEERING LAB
Advanced English
Communications Skills Lab
Advanced English
Communications Skills Lab
Signature of Authorized Signatory with date
31
214
S&H
Engineering Chemistry Lab
Colorimeter
5
215
S&H
Engineering Chemistry Lab
Hot Air oven
2
216
S&H
Engineering Chemistry Lab
PH Meter
3
217
S&H
Engineering Chemistry Lab
Analytical Balances
8
218
S&H
Engineering Chemistry Lab
Redwood Viscometer
2
219
S&H
Engineering Chemistry Lab
Digital Balances
5
220
S&H
Engineering Chemistry Lab
Magnetic Stirrer
1
221
S&H
Engineering Chemistry Lab
Stop Watches
20
222
S&H
Engineering Chemistry Lab
Chemicals & Glassware
0
223
S&H
Head Ogibes
30
224
S&H
Software
30
Advanced English
Communications Skills Lab
Advanced English
Communications Skills Lab
ANNEXURE-2
List of Experiments
DEPARTMENT OF COMPUTER SCIENCE & ENGG.
COMPUTER PROGRAMMING LAB1.
Write a C program to evaluate the following algebraic expressions after reading necessary values
from the user
a) ax+b/ax-b
b) 2.5 log x + cos 32° + | x2 –y2 | + 2 xy
2. Write a C program for the following
a) Printing three given integers in ascending order
b) Sum of 1 + 2+ 3 + _ _ _ _ _ n
c) 1 + x2/2! + x2/ 4!+ _ _ _ _ _ upto ten terms
d) x +x3/3! + x5/5!+ _ _ _ _ _ upto 7th digit accuracy
e) Read x and compute Y =1 for x > 0
Y= 0 for x = 0
Y= -1 for x<0
3. Write C program using FOR statement to find the following from a given set of 20 integers.
i) Total number of even integers. ii) Total number of odd integers.
iii) Sum of all even integers. iv) Sum of all odd integers.
4. Write a C program to obtain the product of two matrices A of size (3X3) and B of size (3X2). The
resultant matrix C is to be printed out along with A and B. Assume suitable values for A & B.
5. Using switch-case statement, write a C program that takes two operands and one operator from the user,
perform the operation and then print the answer. (consider operators +,-,/,* and %).
6. Write C procedures to add, subtract, multiply and divide two complex numbers (x+iy) and (a+ib).Also
write the main program that uses these procedures.
7. The total distance traveled by vehicle in ‘t’ seconds is given by distance = ut+1/2at2 where ‘u’ and ‘a’ are
the initial velocity (m/sec.) and acceleration (m/sec2). Write C program to find the distance traveled at
regular intervals of time given the values of ‘u’ and ‘a’. The program should provide the flexibility to the
user to select his own time intervals and repeat the calculations for different values of ‘u’ and ‘a’.
8. A cloth show room has announced the following seasonal discounts on purchase of items.
Signature of Authorized Signatory with date
32
Purchase Amount Discount (Percentage)
Mill Cloth
1-100
101-200
201-300
Above 300
5.0
7.5
10.0
Handloom items
5.0
7.5
10.0
15.0
Write a C program using switch and If statements to complete the net amount to be paid by a customer.
9. Given a number, write C program using while loop to reverse the digits of the number. Example 1234 to
be written as 4321.
10. The Fibonacci sequence of numbers is 1,1,2,3,5,8… based on the recurrence relation f(n) = f (n-1) + f (n2) for n>2.
Write C program using do-while to calculate and print the first m fibonacci numbers.
11. Write C program to print the following outputs using for loop.
1
1
22
22
333
333
4444
4444
55555
55555
12. Write a C program to extract a portion of a character string and print the extracted string. Assume that m
characters are extracted starting with the nth character.
13. A Maruthi Car dealer maintains a record of sales of various vehicles in the following form :
Vehicle type
Month of Sales
Price (Rs).
Maruthi – 800
02/87
75,000
Maruthi – DX
07/87
95,000
Gypsy
04/88
1,10,000
Maruthi Van
08/88
85,000
Write a C program to read this data into a table of strings and output the details of a particular vehicle sold
during a specified period. The program should request the user to input the vehicle type and the period
(Starting month & ending month).
14. Write a function that will scan a character string passed as an argument and covert all lower case
characters into their upper case equivalents.
15. Implement the following data structures using Arrays
i) Stacks ii) Linear Queues iii) Circular queues
16. Implement binary search tree using linked list and perform the following operations.
i) Insertion ii) Deletion iii) Inorder Traversal iv) Preorder Traversal
v) Post Order Traversal.
17. Singly linked list and doubly linked lists
i) Insertion ii) Deletion iii) Lookup
18. i) Implement stack using singly linked list.
ii) Implement queue using singly linked list.
19. Implement the following sorting techniques.
i) Bubble sort ii) Insertion Sort iii) Quick Sort iv) Heap Sort.
20. Implement the following searching method.
i) Sequential Search ii) Binary Search
21. i) Conversion of Infix expression to Postfix notation.
ii) Simple expression evaluator, that can handle +,-,/ and *.
22. Implement the algorithms for the following iterative methods using C to find one root of the equation
9x1+2x2+4x3= 0
x1+10x2+4x3 = 6
Signature of Authorized Signatory with date
33
2x1-4x2+10x3 = -15.
23. Write Computer programs to implement the Lagrange interpolation and Newton- Gregory forward
interpolation.
24. Implement in ‘C’ the linear regression and polynomial regression algorithms.
25. Implement Trapezoidal and Simpson methods.
ADVACED DATA STRUCTURES (C++) LAB
1. Write C++ programs to implement the following using an array.
a) Stack ADT b) Queue ADT
2. Write C++ programs to implement the following using a singly linked list.
a) Stack ADT b) Queue ADT
3. Write C++ programs to implement the deque (double ended queue)ADT using a doubly linked list.
4. Write C++ program to perform the following operations:
a) Insert an element into a binary search tree.
b) Delete an element from a binary search tree.
c) Search for a key element in a binary search tree.
5. Write a C++ program to implement circular queue ADT using an array.
6. Write C++ programs that use non-recursive functions to traverse the given binary tree in
7. a) Preorder
b) inorder and
c) postorder
8. Write C++ programs for the implementation of bfs & dfs for a given graph.
9. Write C++ programs for implementing the following sorting methods.
a) Quick sort b) merge sort c) Heap sort
10. Write a C++ program to perform the following operations.
a) insertion into a B-tree b) Deletion from a B-tree
11. Write a c++ program to perform the following operations
a) insertion into an AVL –tree b) Deletion from an AVL –tree
12. Write a C++ program to implement Kruskal’s algorithm to generate a minimum spanning tree.
13. Write a C++ program for implementing Knuth-Morris pattern matching algorithm.
14. Write C++ program to implement all the functions of a dictionary (ADT) using hashing.
(cs 05157) DATABASE MANAGEMENT SYSTEMS LAB
1. Creating tables for various relations (in SQL)
2. implementing the queries in SQL for
a) Insertion
b) Retrival (Implement all the operation like Union, Intersect, Minus, in, exist aggregate
functions (Min., Max..) etc..
c) Updation
d) Deletion
Signature of Authorized Signatory with date
34
3. Creating views
4. Writing Assertions
5. Writing Triggers
6. Implementing Operations on relations (tables)using PL/SQL.
7. Creating FORMS
8. Generating REPORTS.
DEPARTMENT OF INFORMATION TECHNOLOGY
IT Workshop
PC Hardware
Week 1 – Task 1: Identify the peripherals of a computer, components in a CPU and its functions.
Week 2 – Task 2: Every student should disassemble and assemble the PC back to working condition.
Week 3 – Task 3: Every student should individually install windows XP on the personal computer.
Week 4 – Task 4: Every student should install Linux on the computer. This computer should have
windows installed.
Week 5 – Task 5: Several mini tasks would be that covers Basic commands in Linux and Basic system
administration in Linux, which includes:
Week 6 – Task 6: Hardware Troubleshooting: Students have to be given a PC which does not boot due to
improper assembly or defective peripherals.
Week 7 – Task 7:Software Troubleshooting: Students have to be given a malfunctioning CPU due to
system software problems.
Week 8 – Task 8: The test consists of various systems with Hardware / Software related troubles,
Formatted disks without operating systems.
Internet & World Wide Web
Week 9 - Task 1:Orientation & Connectivity Boot Camp: Students should get connected to their Local
Area Network and access the Internet.
Week 10 - Task 2: Web Browsers, Surfing the Web: Students customize their web browsers with the
LAN proxy settings, bookmarks, search toolbars and pop up blockers. Week 11 - Task 3: Search Engines
& Netiquette: Students should know what search engines are and how to use the search engines.
Week 12 - Task 4: Cyber Hygiene: Students would be exposed to the various threats on the Internet and
would be asked to configure their computer to be safe on the Internet.
Week 13 Module Test: A test, which simulates all of the above tasks, would be crafted and given to the
students.
COMPUTER NETWORKS AND OPERATING SYSTEMS LAB
PART-A:
1) Implement the data link layer framing methods such as character, character stuffing and bit stuffing.
2) Implement on a data set of characters the three CRC polynomials-CRC12, CRC16 and CRC CCIP.
Signature of Authorized Signatory with date
35
3) Implement Dijkstra’s algorithm to compute the shortest path thru a graph.
4) Take an example submit graph with weights indicating delay between nodes. Now obtain Routing table
art each node using distance vector routing algorithm.
5) Take an example subnet of hosts. Obtain broadcast tree for it.
6) Take a 64 bit playing text and encrypt the same using DES algorithm.
7) Write a program to break the above DES coding.
8) Using RSA algorithm Encrypt a text data and Decrypt the same.
PART-B:
1) Simulate the following CPU scheduling algorithms
a) Round Robin b) SJF c) FCFS d) Priority
2) Simulate all file allocation strategies
a) Sequential b) Indexed c) Linked
3) Simulate MVT and MFT
4) Simulate all File Organization Techniques
a) Single level directory b) Two level c) Hierarchical d) DAG
5) Simulate Bankers Algorithm for Dead Lock Avoidance
6) Simulate Bankers Algorithm for Dead Lock Prevention
7) Simulate all page replacement algorithms
a) FIFO b) LRU c) LFU Etc…..
8) Simulate Paging Technique of memory management.
UML LAB
1) The student should take up the case study of Unified Library application which is mentioned in
the theory, and Model it in different views i.e Use case view, logical view, component view,
Deployment view, Database design, forward and Reverse Engineering, and Generation of
documentation of the project.
2) Student has to take up another case study of his/her own interest and do the same what ever
mentioned in first problem. Some of the ideas regarding case studies are given in reference books
which were mentioned in theory syllabus can be referred for some idea.
WEB TECHNOLOGIES LAB
1. Develop static pages (Using Only HTML) of an online Book Store. The pages should resemble
www.amazon.com The website should consist the following pages.
 Home Page
 Registration and user login
 Books Catalog
 Shopping cart
 Payment by Credit Card
 Order Confirmation
2. Validate the Registration, user Login, user Profile and payment by credit card pages using
JavaScript.
3. Create and save an XML document at the server, which contains 10 users information, Write a
program, which takes User id as an input and returns the user details by taking the user
information from the XML document.
4. Bean Assignments
a.
Create Java Bean which gives the exchange value of INR(Indian Rupees) into
equivalent American/Canadian/Australian Dollar value.
b.
Create a simple bean with a label –which is the count of number of clicks. Then
create a Bean Info class such that only the “count” property is visible in the
property window.
c.
Create two beans –a) Key Pad b) Display Pad. After that integrate the two beans to
make it work as a calculator.
d.
Create two beans traffic light (implemented as a label with only three background
colors-red, green, yellow) And Automobile (implemented as a text box which states
its state /movement). The state of the automobile should depend on the following light
transition table.
Signature of Authorized Signatory with date
36
Light Transition
Automobile State
RedYellow
YellowGreen
GreenRed
Ready
Move
Stopped
5. Install TOMCAT web Server . Convert the static web pages of assignment 2 into dynamic web
pages using Servlets and cookies. Hint: Users Information (user id , password, credit Card
Number) would be stored in Web.xml. Each user should have a separate shopping cart.
6. Redo the previous task using JSP by converting the static web pages of assignment 2 into
dynamic web pages. Create a database with user information and books information. The books
catalogue should be dynamically loaded from the database. Follow the MVC architecture while
doing the website.
7. Implement the “Hello World !” program using JSP Struts Frame Work
JAVA LAB
1) Write a java program that prints all real solutions to the quadratic equation ax2+bx+c=0. Read in
a, b, c and use the quadratic formula. If the discriminant b2-4ac is negative, display a message
stating that there are no real solutions.
2) The Fibonacci sequence is defined by the following rule. The first two values in the sequence are
1 and 1. Every subsequent value is the run of the two values preceding it. Write a java program
that uses both recursive and non-recursive functions to print the nth value in the Fibonacci
sequence.
3) Write a java program that prompts the user for an integer and then prints out all prime numbers
up to that integer.
4) Write a java program that checks whether a given string is a palindrome or not. Example:
MADAM is a palindrome .
5) Write a java program for sorting a given list of names in ascending order.
6) Write a java program to multiply two given matrices.
7) Write a java program that reads a line of integers, and then displays each integer, and the sum of
all the integers (use StringTokenizer class).
8) Write a java program that reads on file name from the user then displays information about
whether the file exists, whether the file is readable, whether the file is writable, the type of file
and the length of the file in bytes.
9) Write a java program that reads a file and displays a file and displays the file on the screen, with
a line number before each line.
10) Write a java program that displays the number of characters, lines and words in a text file.
11) Write a java program that :
a) Implements stack ADT
b) Converts Infix Expression into Postfix form
12) Write an applet that displays a simple message.
13) Write an applet that compute the payment of a lone based on the amount of the loan, the interest
rate and the number of months. It takes one parameter from the browser: Monthly rate; if true,
the interest rate is per month; otherwise the interest rate is annual.
14) Write a java program that works as a simple calculator. Use a grid layout to arrange buttons for
the digits and for the + - * % operations. Add a text field to display the result.
15) Write a java program for handling mouse events.
16) Write a java program for creating multiple threads.
17) Write a java program that correctly implements producer consumer problem using the concept of
inter thread communication.
18) Write a java program that lets users create Pie charts. Design your own interface using swings
and AWT.
19) Write a java program that allows the user to draw lines rectangles and OU. als
20) Write a java program that implements a client server application. The client sends data to a
server. The server receives the data users it to produce a result, and then sends the result back to
the client. The client displays the result on the console. For Ex: The data sent from the client is
the radius of a circle, and the result produced by the server is the area of the circle.
Signature of Authorized Signatory with date
37
21) Write a java program that illustrates how run time polymorphism is achieved.
Latex and Microsoft Word
Week 14 – Word Orientation: The mentor needs to give an overview of Latex and Microsoft word.
Task 1: Using Latex and word to create project certificate. Features to be covered: -Formatting Fonts in
word, Drop Cap in word, Applying Text effects, Using Character Spacing, Borders and Colors, Inserting
Header and Footer, Using Date and Time option in both Latex and Word.
Week 15 - Task 2: Creating project abstract Features to be covered:-Formatting Styles, Inserting table,
Bullets and Numbering, Changing Text Direction, Cell alignment, Footnote, Hyperlink, Symbols, Spell
Check , Track Changes.
Week 16 - Task 3: Creating a Newsletter. Features to be covered:- Table of Content, Newspaper columns,
Images from files and clipart, Drawing toolbar and Word Art, Formatting Images, Textboxes and Paragraphs
Week 17 - Task 4: Creating a Feedback form - Features to be covered- Forms, Text Fields, Inserting
objects, Mail Merge in Word.Week 18 - Latex and Word Module Test - Replicate the given document
inclusive of all features
Microsoft Excel
Week 19 Excel Orientation The mentor needs to tell the importance of MS Excel as a Spreadsheet tool,
give the details of the four tasks and features that would be covered in each. Using Excel – Accessing,
overview of toolbars, saving excel files, Using help and resources
Task 1: Creating a Scheduler - Features to be covered:- Gridlines, Format Cells, Summation, auto fill,
Formatting Text
Week 20 - Task 2: Calculating GPA - .Features to be covered:- Cell Referencing, Formulae in excel –
average, std.deviation, Charts, Renaming and Inserting worksheets, Hyper linking, Count function,
HLOOKUP/VLOOKUP
Week 21 - Task 3: Performance Analysis - Features to be covered:- Split cells, freeze panes, group and
outline, Sorting, Boolean and logical operators, Conditional formatting
Week 22 - Task 4: Cricket Score Card - Features to be covered:-Pivot Tables, Interactive Buttons,
Importing Data, Data Protection, Data Validation,
Week 23 – Excel Module Test - Replicate the given document inclusive of all features
LaTeX and Microsoft Power Point
Week 24 Task1 Students will be working on basic power point utilities and tools which help them create
basic power point presentation.
Topic covered during this week includes :- PPT Orientation, Slide Layouts, Inserting Text, Word Art,
Formatting Text, Bullets and Numbering, Auto Shapes, Lines and Arrows in both LaTeX and
Powerpoint.
Week 25 Task2 Second week helps students in making their presentations interactive.
Topic covered during this week includes :-Hyperlinks, Inserting –Images, Clip Art, Audio, Video, Objects,
Tables and Charts
Week 26 Task3 Concentrating on the in and out of Microsoft power point and presentations in
LaTeX. Helps them learn best practices in designing and preparing power point presentation.
Topic covered during this week includes :- Master Layouts (slide, template, and notes), Types of views
(basic, presentation, slide slotter, notes etc), Inserting – Background, textures, Design Templates,
Hidden slides.
Week 27 Task4 Entire week concentrates on presentation part of LaTeX and Microsoft power point.
Topic covered during this week includes -Using Auto content wizard, Slide Transition, Custom
Animation, Auto Rehearsing
Week 28 Task5
Power point test would be conducted. Students will be given model power point presentation
which needs to be replicated (exactly how it’s asked).
Microsoft Publisher
Signature of Authorized Signatory with date
38
Week 29 Help students in preparing their personal website using Microsoft publisher.
Topic covered during this week includes - Publisher Orientation, Using Templates, Layouts, Inserting
text objects, Editing text objects, Inserting Tables, Working with menu objects, Inserting pages, Hyper
linking, Renaming, deleting, modifying pages, Hosting website.
DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGG.
LIST OF EXPERIMENTS
I ELECTRONIC DEVICES AND CIRCUITS LAB
1. PN JUNCITON DIODE CHARACTERISTICS
2. ZENER DIODE CHARACTERISTICS
3. TRANSISTOR CB CHARACTERISTICS
4. TRANSISTOR CE CHARACTERISTICS
5. RECTIFIER WITHOUT FILTERS
6. RECTIFIER WITH FILTERS
7. FET CHARACTERISTICS
8. SCR CHARACTERISTICS
9. CE AMPLIFIER
10. CC AMPLIFIER
11. SINGLE STAGE R-C COUPLED AMPLIFIER
12. FET CS AMPLIFIER
13. RC PHASE SHIFT OSCILLATOR
14. HARTELY OSCILLATOR
15. COLPITTS OSCILLATOR
16. WIEN BRIDGE OSCILLATOR
II PULSE AND DIGITAL CIRCUITS LAB
1. LINEAR WAVE SHAPING-FILTERS
2. NON-LINEAR WAVE SHAPING- CLIPPERS
3. NON-LINEAR WAVE SHAPING- CLAMPERS
4. TRANSISTOR AS A SWITCH
5. STUDY OF LOGIC GATES
6. STUDY OF FLIP-FLOPS
7. SAMPLING GATES
8. ASTABLE MULTIVIBRATOR
9. MONOSTABLE MULTIVIBRATOR
10. BISTABLE MULTIVIBRATOR
11. SCHMITT TRIGGER
12. UJT RELAXATION OSCILLATOR
III ELECTRONIC CIRCUITS LAB
TESTING IN HARDWARE LABORATORY :
1.
2.
3.
4.
5.
6.
SINGLE STAGE COMMON EMITTER AMPLIFIER
RC PHASE SHIFT OSCILLATOR USING TRANSISTORS
CURRENT SHUNT AND FEEDBACK AMPLIFIER
HIGH FREQUENCY COMMON SOURCE (JFET) AMPLIFIER
SERIES VOLTAGE REGULATOR
SHUNT VOLTAGE REGULATOR
TESTING IN SOFTWARE LABORATORY:
Signature of Authorized Signatory with date
39
2.
3.
4.
5.
6.
1. SINGLE STAGE COMMON EMITTER AMPLIFIER
RC PHASE SHIFT OSCILLATOR USING TRANSISTORS
CURRENT SHUNT AND FEEDBACK AMPLIFIER
HIGH FREQUENCY COMMON GATE (JFET) AMPLIFIER
SERIES VOLTAGE REGULATOR
SHUNT VOLTAGE REGULATOR
IV ANALOG COMMUNICATIONS LAB
1. AMPLITUDE MODULATION AND DEMODULATION
2. DIODE DETECTOR CHARACTERISTICS
3. FREQUENCY MODULATION AND DEMODULATION
4. BALANCED MODULATOR
5. PRE-EMPHASIS & DE-EMPHASIS
6. CHARACTERISTICS OF MIXER
7. DIGITAL PHASE DETECTOR
8. PHASE LOCKED LOOP
9. SYNCHRONOUS DETECTOR
10. SSB SYSTEM
11. FREQUENCY SYNTHESISER
12. AGC CHARACTERISTICS
V MICROPROCESSOR LAB
1. INTRODUCTION TO TASM
2. ARITHEMATIC OPERATION – MULTIBYTE DDITION,SUBSTRACTION,MULTIPLICATION
AND DIVISION.
3. LOGICAL OPERATIONS – PACKED BCD TO UNPACKED BCD, BCD TO ASCII
CONVERSION
4. COMPARISON OF TWO STRINS & REVERSE OF TWO STRINGS.
5. SORTING,ASCENDING & DESCENDING ORDER OF GIVEN LIST.
6. DOS / BIOS PROGRAMMING – DISPLAY CHARACTERS STRINGS.
7. 8255 – PPI : WRITE ALP TO GENERATE SIMSOIDAL WAVE USING PPI.
8. 8251 – USART: WRITE ALP TO ESTABLISH COMMUNICATION BETWEEN TWO
PROCESSORS
9. READING & WRITING ON A PARALLEL PORT BY USING 8051
10. TIMER IN DIFFERENT MODES BY USING 8051
11. SERIAL COMMUNICATION IMPLEMENTATION BY USING 8051
VI DIGITAL COMMUNICATION LAB:
1. PULSE AMPLITUDE MODULATION AND DEMODULATION
2. PULSE WIDTH MODULATION AND DEMODULATION
3. PULSE POSITION MODULATION AND DEMODULATION
4. SAMPLING THEOREM – VERIFICATION
5. TIME DIVISION MULTIPLEXING
6. PULSE CODE MODULATION
7. DIFFERENTIAL PULSE CODE MODULATION
8. DELTA MODULATION
9. FREQUENCY SHIFT KEYING
10. PHASE SHIFT KEYING
11. DIFFERENTIAL PHASE SHIFT KEYING
VII
LINEAR IC APPLICATION LAB:
1. STUDY OF OP AMPS –IC 74, IC 555, IC 565, IC 566, IC 1496 – FUNCTIONING,
PARAMETERS AND SPECIFICATION.
2. OP AMP APPLICATION – ADDER, SUBTRACTOR, COMPARATOR CIRCUITS.
Signature of Authorized Signatory with date
40
3. INTEGRATOR AND DIFFERENTIATOR CIRCUITS USING IC 741.
4. ACTIVE FILTER APPLICATION - LPF, HPF(FIRST ORDER).
5. FUNCTION GENERATOR USING OP AMPS.
6. IC 555 TIMER – MONOSTABLE OPERATION CIRCUIT.
7. IC 555 TIMER – ASTABLE OPERATION CIRCUIT.
8. IC 566 – VCO APPLICATIONS.
9. VOLTAGE REGULATOR USING IC 723.
PART – B
SIMULATE THE INTERNAL STRUCTURE OF THE FOLLOWING DIGITAL IC’s USING VHDL
1. D FLIP – FLOP 7474
2. DECADE COUNTER 7490
3. SHIFT REGISTERS 74957
4. 3 – 8 DECODER 74138
5. 4 BIT COMPARATOR 7485
6. 8X1 MULTIPLEXER 74151
7. 2X4 DEMULTIPLEXER 741555
VIII DIGITAL SIGNAL PROCESSING LAB:
1.STUDY THE ARCHITECTURE OF DSP CHIP – 3206713
2.LINEAR CONVOLUTION USING MATLAB
3. CIRCULAR CONVOLUTION USING MATLAB
4. GENERATE SUM OF SINUSOIDAL SIGNAL ALGORITHM USING MATLAB
5. FIND FREQUENCY RESPONSE OF ANALOG LP/HP FILTERS USING MATLAB
6. COMPUTE POWER DENSITY SOECTRUM OF A SEQUENCE.
7. LINEAR CONVOLUTION USING CC STUDIO
8. CIRCULAR CONVOLUTION USING CC STUDIO
9. FJR-FILTERS (LP/HP) USING RECTANGULAR WINDOW
10. FJR-FILTERS (LP/HP) USING TRIANGULAR & KAISER WINDOW.
11. IIR FILTERS (LP/HP)
12. N-POINT FET ALGORITHM
13. FET OF GIVEN 1-D SIGNAL AND PLOT
IX MICROWAVE & OPTICAL COMMUNICATION LAB :
PART-A
1. REFLEX KLYSTRON CHARACTERISTICS
2. GUNN DIODE CHARACTERISTICS
3. ATTENNATION MEASUREMENT
4. DIRECTIONAL COUPLER CHARACTERISTICS
5. VSWR MEASUREMENT
6. IMPEDANCE AND FREQUENCY MEASUREMENT
7. WAVEGUIDE PARAMETERS MEASUREMENT.
8. SCATTERING PARAMETERS OF MAGIC TEE.
PART – B
1.CHARACTERIZATION OF LED
2.CHARACTERIZATION OF LASER DIODE
3. INTENSITY MODULATION OF LASER O/P THROUGH AN OPTICAL LINE.
4. MEASUREMENT OF DATA LATE FOR DIGITAL OPTICAL LINK.
5. MEASUREMENT OF NA
6. MEASUREMENT OF LOSSES FOR ANALOG OPTICAL LINK.
X EMBEDDED SYSTEMS LAB :
1.WRITE A PROGRAM TO (A) LEAD INPUTS FROM SWITCHES (B) TO MAKE LED’S BLINK
2.WRITE A PROGRAM FOR SERIAL COMMUNICATION
3.WRITE A PROGRAM FOR ENCRIPTION / DECRIPTION.
4. SORT RTOs(MCOs) ON TO 89C51 BOARD AND VERIFY.
5. SIMULATE ON ELEVATOR MOVEMENT USING RTOs ON 89C51 BOARD
Signature of Authorized Signatory with date
41
LIST OF EXPERIMENTS FOR EEE I & II YEAR
EEE I YEAR (Workshop Lab)
S. No.
List of experiments
Equipments
I
Carpentry
 Carpentry Vice
1)Cross lap joint .
 Jack plane
2)Dovetail joint .
 Try Square
3)Tenon joint.
 Hand Saw
 Tenon Saw
 Firmer Chisel
II
Fitting
 Wooden Mallet
 Steel Rule
 Marking /Mortise Gauge
 Claw Hammer
1)Dovetail fit
 Bench Vice
2) V- fit
 Steel Rule
3) Radius fit
 Try square
 Scriber
 Dot Punch
 Hack Frame With Blade
 Ball Peen hammer
 Chisel.
 Flat File (Rough&Smooth)
Triangular File
III
House wiring
 Electrical Case
1)Series & parallel wiring.
 Switches
2)Fluorescent Lamp wiring
 Straight Holders
3)Stair case wiring
 Two Way Switches
 Gang Boxes
 Clip Nails
 Screws.
Trades for Demonstration.
1) Plumbing.
2) ARC Welding
3) Study and working of Drilling Machine &Bench Grinder.
EEE (HHM LAB)
S.NO.
List of experiments
01
Impact of jets on vanes
02
Performance test on pelton wheel
03
Performance test on francis turbine
04
Performance test on single stage centrifugal pupm
05
Performance test on multi stage centrifugal pupm
06
07
08
09
10
11
Performance test on Reciprocating pump
Calibration of venturi meter
Calibration of Orfice meter
Determination of friction factor for a given pipe line
Determination of loss head due to sudden contraction in a pipe line
Turbine flow meter
EEE SEM(Electrical circuits lab)
List of experiments
Verification of Max power transfer,Theminis &Norton’s theorem
S.NO.
01
Signature of Authorized Signatory with date
42
02
03
04
Determination of self & Mutual Inductance
Measurement of 3ø power
Verification of millimans and reciprocity theorem
05
06
Series and parallel Resonance
Determination of Z & Y Parameters
07
08
Determination of ABCD 4 hybrid parameter
Verification of compensation theorem
09
Verification of superposition theorem and RMS value of complex wave
10
11
12
Locus diagram of PL and RC circuits
Simulation of d.c.circuit using Mat lab
Mesh Analysis using Matlab
EEE (Electrical machine lab-1)
S.NO. List of experiments
01
Magnetization characteristics of D.C. Shunt generator
02
03
04
05
06
07
Load test on D.C.Shunt generator
Load test on D.C.Series generator
Load test on D.C. compound generator
Hopkinson's test on D.C Shunt machines
Field test on D.C. Series machines
Swimburnes test and Speed control of D.C. Shunt motor
08
09
10
Brake test on D.C. Compound motor
Brake test on D.C.Shunt motor
Separation of losses in D.C. Shunt motor
EEE (Electrical Technology lab)
S.NO. List of experiments
01
Verification of Superposition theorem and Reciprocity theorem
02
03
04
05
06
07
Verification of maximum power transfer theorem
Verification of Thenenin’s and Norton’s Theorem
Two port network parameters (open circuit & short circuit)
Series and parallel resonance(Q-Factor,Bandwidth,selectivity)
Magnetization characteristics of DC Shunt generator
Swimburnes test on D.C. Shunt motor
08
09
10
Brake test on 3-d induction motor
Open circuit & short circuit test on 1-ø transformer
Regulation of 3-ø alternator by synchronous impedance method
EEE (Power Electronics lab)
Sl.
NO.
01
List of experiments
02
03
04
Gate fixing circuits
1-ø qc voltage controller with R, RL loads
1-ø full bridge rectifier with R, RL lOADS
Study of V-I characteristics of SCR,INDSFET and IGBT
Signature of Authorized Signatory with date
43
05
06
07
Forced Commutation circuits
Parallel inverter with R,RL loads
Jones chopper with R, RL loads
08
09
10
Mc-Murray-Bedford inverter with R, RL Loads
1-ø AC cycloconvertor with R,RL loads
1-ø Half controlled bridge rectifier with R,RL loads
EEE (Control Systems And Simulation Lab)
S.NO. List of experiments
01
Time response of Second order system
02
03
04
05
06
07
08
Characteristics of Synchros
Temperature controller using PID
Effect of feedback on DC servo motor
Transfer function of DC motor
Lag and lead compensation –Magnitude and phase plot
Characteristics of magnetic amplifiers
Characteristics of AC servo motor
09
10
PSPICE simulation of Op-Amp based Integrator and Differentiator circuits.
Stability analysis (Bode, Root Locus, Nyquist) of Linear Time Invariant system
using MAT Lab
Programmable logic controller-study and verification of truth tables of logic
gates,simple Boolean expressions and application of speed control of motor.
11
EEE (Electrical Machines -II Lab)
S.NO. List of experiments
01
Open Circuit and short circuit test on 1-ø Transformer
02
03
04
05
06
07
08
09
10
Sumpner’s test on pair of transformers
Scott connection of Transformers
Parallel operation of two 1-ø transformers
Equivalent circuit of a single phase induction motor
Brake load test on 3-ø induction motor
No-load & Blocked motor test on 3-ø Induction motor
Regulation of 3-ø alternator by synchronous impedence method and mmt
method.
V and V curves of a three phase synchronous motor
Determination of XD and XQ of a saliet pole synchronous machine.
EEE (Electrical Measurements Lab)
S.NO. List of experiments
01
Calibration and Testing of Single phase Energy Meter
02
03
04
05
06
07
Calibration of Dynamometer Power factor Meter
Calibration of PMMC voltmeter and Ammeter using Cromptons DC
Potentiometer
Measurement of three phase reactive power
Measurement of choke coil parameters
Silsbees test for testing CT’s
Kelvins double bridge
Signature of Authorized Signatory with date
44
08
09
10
Schering and Andersons bridge
Relay testing usin secondary current injection over current and Reverse current
Calibration of low power factor wattmeter.
DEPARTMENT OF SCIENCE & HUMANITIES
LIST OF EXPERIMENTS
1.ENGLISH LANGUAGE COMMUNICATION SKILLS LAB - I
1. Introduction to the sounds of English – vowels, diphthongs and consonants
2. Introduction to Stress and intonation
3. Situational Dialogues/Role Plays
4. Oral presentations
5. Just a Minute session (JAM)
6. Describing objects
7. Describing people
8. Information transfer
9. Giving directions
10. Telephoning skills
11. Interviews
12. Group discussion
* The number of experiments usually go beyond the above stated number according to the need of
the group.
2.ENGLISH LANGUAGE COMMUNICATION SKILLS LAB – II
1. Functional English
2. Vocabulary building
3. JAM
4. Group discussion
5. Interview skills
6. Debate
7. Resume writing
8. Presentations
9. Reading comprehension
10. Technical report writing
3. ENGINEERING PHYSICS LAB
1. Determination of Refractive Index of the material of a Prism – Spectrometer.
2. Dispersive power of the material of a Prism. – Spectrometer.
3. Cauchy’s constants – Spectrometer.
4. Determination of wavelength of a source – Diffraction Grating.
5. Determination of thickness of a thin object using parallel fringes.
6. Newton’s Rings.
7. Determination of Rigidity modulus of a material in the form of a wire – Torsional pendulum.
8. Melde’s Experiment – Transverse and Longitudinal modes.
9. Single slit diffraction using Sodium lamp.
10. Double slit diffraction using sodium lamp.
11. Single slit diffraction using lasers.
12. Double slit diffraction using lasers.
13. Time constant of R-C Circuit.
14. L-C-R Circuit.
Signature of Authorized Signatory with date
45
15. Verification of laws of stretched string – sonometer.
16. Study of Characteristics of LED and LASER sources.
17. Study of characteristics of p-i-n and avalanche photo diode detectors.
18. Bending losses of fibers.
19. Evaluation of Numerical Aperture of a given fiber.
20. Magnetic field along the axis of a current carrying coil – Stewart and Gee’s method.
21. Hall effect.
22. B – H curve.
23. Energy gap of a material of p-n junction.
24. Determination of Young’s modulus and Poisson’s ratio by Comu’s method.
25. Thermo Electric effect – Seebeck effect and Peltier effect.
4. ENGINEERING CHEM LAB
1.Preparation of a standard solution of Oxalic acid and estimation of Ferrous Iron by
Permanganometry.
2. Estimation of Ferric Iron by preparing a standard solution of potassium dichromate.
3. Estimation of hardness of water by EDTA method.
4. Estimation of alkalinity of water.
5. Determination of percentage of copper in brass.
6. Conductometric titration of strong acid Vs strong base
7. Conductometric titration of mixture of acids Vs strong base.
8. Titration of strong acid Vs strong base
9. Titration of weak acid Vs strong base by potentiometry and determination of dissociation constant of
weak acid – (Demonstration experiment)
10. Preparation of standard calcium solution and estimation of total hardness of water by EDTA
complexometry
11. Estimation of calcium in limestone by Permanganometry.
12. Estimation of manganese dioxide in pysolusite
13. Determination of ferrous iron in cement by colorimetric method.
14. Preparation of urea – formaldehyde resin
15. Preparation of Thiokol rubber
16. Determination of the capacity of the given cation – exchange resin. (ex.Zero-karb-225 in the hydrogen
form)
17. Determination of viscosity of lubricants by Redwood viscometer
18. Preparation of Aspirin
19. Determination of Calorific value of solid fuel by Bomb calorimeter.
20.Estimation of loss of weight of mild steel in presence of acid and inhibition.
21. Preparation of membranes for filter anyone (Demonstration)
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
M.Tech. ELECTRONICS & COMMUNICATION ENGINEERING
COURSE STRUCTURE AND SYLLABUS
I YEAR - I Semester
Code
Group
Elective –I
Subject
Digital System Design
Advanced Digital Signal Processing
VLSI Technology and Design
Advanced Data Communications
Detection and Estimation Theory
Microcontrollers for Embedded System
Design
Signature of Authorized Signatory with date
L
3
3
3
3
3
P
0
0
0
0
0
Credits
3
3
3
3
3
46
Elective -II
Lab
Speech Processing
Internetworking
Advanced Computer Architecture
Embedded Real Time Operating Systems
Signal Processing Lab
Seminar
Total Credits (6 Theory + 1 Lab.)
3
0
3
0
-
3
-
2
2
22
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
M.Tech. Degree COURSE STRUCTURE in
EMBEDDED SYSTEMS
I YEAR - I Semester
Code
Group
Subject
L
P
Credits
Microcontrollers for Embedded System
3
0
3
Design
Embedded Real Time Operating Systems 3
0
3
VLSI Technology & Design
3
0
3
Advanced Computer Networks
3
0
3
Elective -I
Advanced Computer Architecture
3
0
3
Wireless LANs & PANs
Advanced Digital Signal processing
Elective -II Digital System Design
3
0
3
Neural Networks & Applications
Advanced Operating Systems
Lab
Embedded Systems Lab - I
0
3
2
Seminar
2
Total Credits (6 Theory + 1 Lab.)
22
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
M.Tech. VLSI
COURSE STRUCTURE AND SYLLABUS
I YEAR - I Semester
Code
Group
Subject
Microcontrollers for Embedded System
Design
CPLD & FPGA Architectures & Applications
VLSI Technology and Design
Algorithms for VLSI Design Automation
Elective –I Hardware Software Co-Design
Digital System Design
Device Modeling
Elective -II Advanced Digital Signal Processing
Network Security & Cryptography
Micro Electromechanical Systems
Lab
Simulation Lab (VLSI)
Seminar
Total Credits (6 Theory + 1 Lab.)
L
3
P
0
Credits
3
3
3
3
3
0
0
0
0
3
3
3
3
3
0
3
0
-
3
-
2
2
22
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
Signature of Authorized Signatory with date
47
M.Tech. COMPUTER SCIENCE & ENGINEERING
COURSE STRUCTURE AND SYLLABUS
I YEAR - I Semester
Code
Group
Elective –I
Elective -II
Lab
Subject
Advanced Problem Solving
Computer System Design
Embedded Systems
Java & Web Technologies
Object Oriented Modeling
Software Quality Assurance & Testing
Software Architecture & Design Patterns
Software Design & Engineering
Advanced Compiler Design
Image Processing & Pattern Recognition
Java & Web Technologies Lab
Seminar
Total Credits (6 Theory + 1 Lab.)
L
3
3
3
3
3
P
0
0
0
0
0
Credits
3
3
3
3
3
3
0
3
0
-
3
-
2
2
22
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
M.Tech. SOFTWARE ENGINEERING
COURSE STRUCTURE AND SYLLABUS
I YEAR - I Semester
Code
Group
Elective –I
Elective -II
Lab
Subject
Software Requirements & Estimation
Object Oriented Modeling
Software Process & Project Management
Java & Web Technologies
Advanced Computer Networks
Wireless Networks and Mobile Computing
Adhoc and Sensor Networks
Information Retrieval Systems
Distributed Database
Storage Area Networks
Java & Web Technologies Lab
Seminar
Total Credits (6 Theory + 1 Lab.)
L
3
3
3
3
3
P
0
0
0
0
0
Credits
3
3
3
3
3
3
0
3
0
-
3
-
2
2
22
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
M.Tech. COMPUTER SCIENCE
COURSE STRUCTURE AND SYLLABUS
Signature of Authorized Signatory with date
48
I YEAR - I Semester
Code
Group
Subject
L
P
Credits
Elective –I
Elective -II
Lab
Total Credits (6 Theory + 1 Lab.)
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
M.Tech. POWER ELECTRONICS
COURSE STRUCTURE AND SYLLABUS
I YEAR - I Semester
Code
Group
Subject
L
P
Credits
Elective –I
Elective -II
Lab
Total Credits (6 Theory + 1 Lab.)
Signature of Authorized Signatory with date
49