Al-Balqa' Applied University
Faculty of Engineering Technology
Mechatronics Engineering Department
Laboratory Equipment Technical Specification
Item
No.
Item Title and Specifications
‫وحدة تدريبية لدراسة الخواص التنظيمية لمحركات التيار المتردد‬
1.
Training unit for investigation of regulated
characteristics of AC motors
Unit
Qua
ntity
Training
unit
1
Origin
USA
UK
EU
Self-contained trainer consisting of the following main
components:
Japan
Germany
Three-phase AC motors: squirrel-cage, wound rotor, synchronous,
.kW 1.5-1 power
Load unit: Electric machine with variable load torque, coupled with the
motor
Power supply: regulated, suitable for the AC motors.
power and ,Measuring instruments: speed, torque, current, voltage
.inserted into the stator or rotor circuits be Rheostats: to
Instructional and experimental The trainer should be supplied with
including typical experiments to study the mechanical and ,manual
.electro-mechanical characteristics of the drive system
‫وحدة تدريبية لقيادة محركات التيار المباشر باستخدام المقطع‬
2.
DC motor drive trainer
Training
unit
1
USA
UK
Self-contained trainer consisting of the following main components:
EU
DC separately-excited motor, series field motor, and compound field
motor.
Japan
Power: 0.5-1 kW
The unit should include:
- Load unit: Electric machine with variable load torque, coupled with
the motor.
- Three-phase uncontrolled rectifier.
-Four quadrant Chopper with variable duty cycle 0-1 to feed the DC
motor
- Three-phase controlled rectifier.
The trainer should provide the ability to measure the speed, current,
torque and power
The trainer should be supplied with Instructional and experimental
manual, including typical experiments to study the mechanical and
.electro-mechanical characteristics of the drive system
1
Germany
‫وحدة تدريبية لقيادة محركات التيار المباشر ذات التغذية الراجعة‬
3.
Closed-loop DC drive trainer
Training
Bench
1
USA
UK
Self-contained trainer consisting of the following main components:
EU
DC separately/ shunt, series field motor, and compound field motor.
Japan
Power: 0.5-1 kW
Germany
Load unit: Electric machine with variable load torque, coupled with the
motor
DC power supply suitable for the DC motors
The input voltage to the DC supply is single-phase 230V, and 50 Hz.
The trainer should provide investigation of open-loop DC drives and
closed-loop DC drives with single feedbacks by speed, armature
voltage and armature current, and combined feedbacks.
The trainer should provide the ability to measure the speed, current,
torque and power
The trainer should be supplied with Instructional and experimental
manual, including typical experiments to study the mechanical and
.electro-mechanical characteristics of the drive system
4.
LabView software
NIAcademic Site License lab VIEW Teaching Only (College
Teaching),Include 1 Year SSP, NI - LV License
‫وحدة قياس الحرارة‬
5.
Temperature Measurement Trainer Setup:
A bench-mount trainer that is used to teach students how to
measure temperature using different types of sensing devices;
Thermocouple (TC), Resistive Temperature Device (RTD) and
.Thermistor
Thermocouple Characteristics, RTD Characteristics, Thermistor
Characteristics Comparison between Temperature Sensing
Devicess..etc
:Control and Acquisition Hardware
Integrated Controller and Chassis, 4-Slot LX 25 FPGAPower Supply 24 VDC, 5A, 100-120/200-240 VACCh-Ch Isolated, 24-bit, ±60V, 100S/s Univeral AI Module, with 4strain relief
Ch 24 V, 1 us, High-Speed Sourcing DO, with strain relief-8-
Workstation .manual included Experimental
.Developed Software is included
2
Package
multiuser
license
1
Training
unit
1
USA UK. EU
Japan. Germany
USA
UK
EU
Japan
Germany
‫وحدة قياس التدفق‬
6.
Flow Measurement Trainer Setup:
Training
unit
1
USA
UK
used to teach students how to measure flow Bench-mount trainer
between two tanks using different flow measuring devices;
Magnetic Flow Meter, Paddle Wheel Flow Meter, Venturi Flow
.Meter, Rota Meter and Vortex Flow Meter
EU
Japan
Germany
Magnetic Flow Meter Characteristics, Paddle :Experiments List
Wheel Flow Meter Characteristics, Differential Pressure Flow Meter
Characteristics, Comparison between Flow Meters,Vortex Flow
etc. Meter Characteristics
:Control and Acquisition Hardware
Slot Integrated 266 MHz Real-Time Ctrlr, 2M Gate FPGA-8Power Supply 24 VDC, 5A, 100-120/200-240 VACCh ±20 mA, 200 kS/s, 16-Bit AI Module, with strain relief-8Ch 24 V, 1 us, High-Speed Sourcing DO, with strain relief-8ch,16-bit, +/-10 V, 100 kS/s/Ch, AO Module, with strain relief 4ch, 16-Bit, +/-10 V, 100 kS/s/ch, SS Diff AI, with strain relief 4Ch 60 V, 250 us, Sinking/Sourcing DI Module, with strain relief-8Workstation
.manual included Experimental
.Developed Software is included
‫وحدة قياس المستوى‬
7.
Pressure Measurement Trainer Setup & Level:
Bench-mount trainer used to teach students how to measure level
and pressure using different types of measuring devices;
Capacitance Level Meter, Ultrasonic Level Meter, Piezoresistive
.Pressure Sensor, and Capacitance Change Pressure Sensor
Capacitance Level Meter Characteristics, :Experiments List
Ultrasonic Level Meter Characteristics, Piezoresistive Sensor
Characteristics, Capacitance Change Sensor Characteristics..etc
:Control and Acquisition Hardware
Integrated Controller and Chassis, 4-Slot LX 25 FPGA Power Supply 24 VDC, 5A, 100-120/200-240 VACCh ±20 mA, 200 kS/s, 16-Bit AI Module, with strain relief-8Ch 24 V, 1 us, High-Speed Sourcing DO, with strain relief-8ch,16-bit, +/-10 V, 100 kS/s/Ch, AO Module, with strain relief 4ch, 16-Bit, +/-10 V, 100 kS/s/ch, SS Diff AI, with strain relief 4Workstation
.manual included Experimental
Developed Software is included
.
3
Training
unit
1
USA
UK
EU
Japan
Germany
8.
‫وحدة قياس السرعة‬
Speed Measurement Trainer & Position
The objective of this trainer is to teach students how to measure the
position & position and the speed of a rotating shaft using speed
sensors, and using a graded disc from 0 to 360 . In addition, the student
have the chance to compare between the characteristics and should
behaviour of different speed sensors; as a result the student will be able
.to note the differences between them
Photoelectric Characteristics, Rotary Encoder :Experiments List
Electromagnetic Sensor, Speed Sensors Comparison ,Characteristics
etc,
:Control and Acquisition Hardware
Integrated Controller and Chassis, 4-SlotPower Supply 24 VDC, 5A, 100-120/200-240 VACCh 24 V, 7 us, Sinking DI Module-32Ch 24 V, 1 us, High-Speed Sourcing DO-8ch,16-bit, +/-10 V, 100 kS/s/Ch, AO Module 4Ch 60 V, 250 us, Sinking/Sourcing DI Module-8-
Training
unit
1
USA
UK
EU
Japan
Germany
Workstation
.manual included Experimental
.Developed Software is included
‫وحدة قياس القوة و االنفعال‬
9.
:Strain Measurement Trainer Setup & Force
Training
unit
1
USA
UK
Strain and Force Measurement Trainer is an ideal setup for
introducing strain gauge measurement to students. It introduces
the operation principle of strain gauges and the conversion
.methods between electronic raw data and strain and force
EU
Japan
Germany
& Acquiring Physical Phenomena, Bending Strain :Experiments List
Stress..etc & Stress, Tensile Strain & Stress, Torsional Strain
:Control and Acquisition Hardware
Integrated Controller and Chassis, 4-Slot LX 25 FPGAPower Supply 24 VDC, 5A, 100-120/200-240 VACCh ±60 V, 50 kS/s/Ch, 24-Bit,Ch-/-Ch Isolated AI Module, with -4adaptor
Ch 60 V, 250 us, Sinking/Sourcing DI Module, with strain relief-8Workstation
.manual included Experimental
.Developed Software is included
‫وحدة التقاط اشارات القياس و التحكم في انظمة المكياترونكس‬
10.
Pac Mechatronics kit
The kit includes WIFI ,MSP connector, starter ,Mechatronics and
embedded kit with FPGA chip
.
4
Training
unit
7
USA
UK
EU
Japan
Germany
‫وحدة التحكم بالتدفق‬
11.
Flow Control Trainer:
Training
unit
1
USA
UK
EU
A bench-mount trainer for teaching flow control. It includes all the
required sensors and actuators to perform a full experiments list
for teaching flow control. It includes a programmable automation
controller with a webserver and ready software to run the
experiments. The trainer must have the required features
including Restful Services to enable the students to perform the
experiments remotely using a web browser wherever he was and
using an internet connection.
Japan
Germany
Curriculum Coverage:











Acquiring Physical Phenomena
On/Off Control
PID Feedback Control
Lead-Lag Compensation
Feedback/Feedforward Control
Ratio Control
Level Switches
Flow Meters
Flow Control Valve
Pump
Variable Frequency Drive





Integrated real time controller with FPGA chassis
DO module, 8-Channel, 5 to 30 V
AI module, 4-Channel, 100 kS/s/ch, 16-bit, ±10 V
AI module, 8-Ch, ±20 mA, 200 kS/s, 16-Bit
AO module, 4-Channel, 100 kS/s, 16-bit, ±10 V
Workstation
.manual included Experimental
.Developed Software is included
‫وحدة التحكم بالمستوى‬
12.
Level Control Trainer
A bench-mount trainer for teaching level control. It includes all the
required sensors and actuators to perform a full experiments list
for teaching level control ,and a programmable automation
controller with a webserver and ready software to run the
experiments. The trainer must have the required features
including Restful Services to enable the students to perform the
experiments remotely using a web browser wherever he was and
using an internet connection.
:Curriculum Coverage





5
Acquiring Physical Phenomena
On/Off Control
PID Feedback Control
Lead-Lag Compensation
Feedback/Feedforward Control
Training
unit
1
USA
UK
EU
Japan
Germany
Sensors and Actuators:





Level Switches
Level Sensor
Flow Control Valve
Pump
Variable Frequency Drive





Integrated real time controller with FPGA chassis
DO module, 8-Channel, 5 to 30 V
AI module, 4-Channel, 100 kS/s/ch, 16-bit, ±10 V
AI module, 8-Ch, ±20 mA, 200 kS/s, 16-Bit
AO module, 4-Channel, 100 kS/s, 16-bit, ±10 V
Workstation
.manual included Experimental
.Developed Software is included
‫برنامج التحكم لالنظمة الرئوية و الهيدروليكية‬
13.
Automation Studio™ + Hardware
Training
unit
1
UK
x Automation Studio? with all modules 20
.Electro-Hydraulic trainer & x Hydraulic 2
students (2 students per unit)"20 students can 6 Training Capabilities
work simultaneously on the software. Once circuits are created, tested,
move in turn to hands-on experience on the and validated, they can
".equipment
contains hundreds of components, therefore ”Automation Studio“
"students can be initiated to many different behavior
:Software comes with
Hydraulics Proportional Hydraulics Pneumatics )IEC and JIC( Electrical Controls )D.C. Circuits & .technical (A.C-Electro HMI and Control Panel Module -SFC PLC Ladder Logic Fluid Power Component Sizing Module
Digital Electronic Bill of Materials -
14.
PLC system









6
CPU S7 - 314 type ,
Power supply 2 A
Memory 32 KB
Input module 16DI-1BH
Output module 16DQ-1BH
2 connectors 20 pins
Rail
PC connection cable
Operator interface terminal (HMI), touch screen,
colored, multi-panel, size 10”, with required software
and connection cable.
USA
EU
Japan
Germany
Training
Bench
2
USA
UK
EU
Japan
Germany


Theoretical-application handbook for equipment
presentation and guide to the educational exercises.
Technical handbook of the equipment with technical
specifications, use and maintenance.
LOGO type PLC
15.







LOGO PLC, version 230 RC
Power supply and digital inputs 115/230 VAC
Digital outputs: relays, 8 A max.
Time switches (real clock)
PC connection cable.
Theoretical-application handbook for equipment
presentation and guide to the educational exercises.
Technical handbook of the equipment with technical
specifications, use and maintenance.
Control unit six pulse, digital
16.
Trigger pulse generator with analog and digital interface (8 bit) for
connection to personal computer with CASSY interface in linecommutated, single-phase and three-phase rectifier and inverter
circuits, as well as in AC and three-phase controllers. The
matching of the control unit to the converter circuit is carried out
:using several switches with the following options
Training
unit
4
USA
UK
EU
Japan
Germany
Training
unit
8
USA
UK
EU
Japan
Germany
.Single pulse or pulse train operation possible
.)Secondary pulse can be switched off (after 60°
Phase shift can be set for various natural commutating points: 0°,
.30°, 60°
Reliable gate triggering of the valves is guaranteed for even small
loads thanks to powerful gate trigger pulses and large voltagetime areas (500 µVs) of the trigger pulse. Rotating field
:monitoring



Green LED when rotating field is clockwise
Red LED when rotating field is anti-clockwise or for phasefailure
Input/Outputs:

Single output for rotating field monitoring (can be ORoperated with the pulse inhibit input).

3x2 electrically isolated pulse outputs

pulse inhibit input

Synchronizing voltage:1…440 V AC..

Input Control Voltage: 0…10 V DC for gate control angle
180°…0°.

Digital interface: TTL-Level, 8 bit resolution for 180°.
Supply voltage: +/- 15 VDC.

Power supply 0 +/- 15 V

17.
DC variable 0-10 V
Four Quadrant Chopper for DC Motor training kit
Technical Specification



USA
UK
EU
Input Voltage: 60VDC
Japan
Current rating:2A
Germany
User Manual of Kit
7
4
Kit Working voltage:(220-240)VAC
Accessories

Training
unit
18.
Step Down and Step Up Chopper training kit
Training
unit
4
UK
Technical Specification




USA
EU
Kit Working voltage: (220-240)VAC
Input Voltage: (0-30)VDC
Japan
Output Current: 2A
Germany
Frequency: Wide Range
Accessories
19.


RHEOSTAT R-LOAD (Value 0-200 Ohm 2 A)

User Manual of Kit
INDUCTOR L-LOAD(
Value 0-120mh)
IGBT Based Three Phase Inverter training kit
Training
unit
4
USA
UK
TECHNICAL SPECIFICATION
EU

Kit Working voltage:(220-240)VAC
Japan


Input Voltage:100VDC
Germany


Input Frequency: 50Hz
Output Current:1A
Output Frequency:10-50Hz
ACCESSORIES

Three Phase Lamp Load.

User Manual of Kit
‫وحدات تدريبية لمادة الكترونيات القدرة‬
20.
The Educational Laboratory Virtual Instrumentation
Suite is an Instrumentation, Design, and Prototyping
:Platform which includes




8
Power electronics module
Integrated suite of 12 instruments (Arbitrary
Waveform Generator, Bode Analyzer Digital Bus
Reader, Digital Bus Writer, Digital Multimeter,
Dynamic Signal Analyzer, Function Generator,
Impedance Analyzer, Oscilloscope, Two-Wire
Current-Voltage Analyzers, Three-Wire CurrentVoltage Analyzers, Variable Power Supplies)
1.25 MS/s oscilloscope option available
Hi-Speed USB plug-and-play connectivity
Training
unit
6
USA
UK
EU
Japan
Germany




21.
Complete integration with Multisim for teaching
circuits concepts
Extend your lab with companion products.
Free courseware available for download
Brand Name Personal Computer
Photovoltaic solar energy training unit
:include The unit

Photovoltaic model

DC load and battery charger regulator.

Radiation sensor

Single-phase inverter

Grid connection inverter

Simulation software
‫أجهزة التقاط االشارات الحيوية االساسية‬
22.
Medical Development Kit Bio
Training
unit
2
USA
UK
EU
Japan
Germany
Training
unit
5
USA
UK
EU
Specification
9

Micro-Controller Block

Power Block

Electromyography Block (EMG)

Electrodermal Activity Block (EDA)

Electrocardiogram Block (ECG)

Lux Block

Accelerometer Block

Bluetooth Block

LED Block
Japan
Germany
‫أجهزة قياس طبية نوعية‬
23.
Unit
USA
UK
Medical equipments
EU
-Ear pulse sensor
1
-Galvanic Skin Response
1
-Finger heart rate sensor
1
-)pack 10( Biomedical Sensor Pad
5
-Arduino heart rate measurement module
1
-EEG Brain Wave
1
-ECG module
5
AD624 IC -
20
-Incubator care unit
1
Machine Health Monitoring Trainer
Specification
Computer based Machine Health Monitoring Trainer used to
teach vibration, power and temperature monitoring in rotary
motors Includes all required sensors to measure vibration,
temperature and power parameters For use with National
Instruments Data Acquisition & Control hardware
10
Germany
1
-Muscle Sensor
24.
Japan
Unit
1
USA
UK
EU
Japan
Germany