South Carleton High School
TDJ2O
KITCHEN FLOOR PLAN AND MODEL
The task is to design and build a model kitchen.
Scale: 1’ = 1/2” (1 foot actual size = 1/2 inch model size)
In your project you must include an AutoCAD Floor Plan with layers showing electrical and
plumbing information.
Also, you need to show purchased items (appliances and fixtures) and their cost.
Include all construction materials and their individual cost (i.e. flooring, countertop, kitchen
cabinet and paint selection). Show examples (pictures) of items that can be obtained from
catalogues at your local hardware or building supply store.
You will be constructing your kitchen using the following materials and tools: foam board for
the walls, matting for cabinets and appliances, and white glue.
The base of the model will measure 21” by 13”, allowing a one inch border.
Your kitchen dimensions should be appox. 11’ by 19’
Your budget is $30,000 CDN
Kitchen Design Marking Guide
Theory
Title page
Situation & Design Brief (Problem)
Research Material
Bibliography
Material List
Preliminary Design (Sketches 2D and 3D)
/2
/3
/5
/5
/3
/ 15
Total:
Kitchen Model
/ 33
Practical
Completeness
Identification of Drawing, scale, date, name etc
Exterior walls with windows and Doors
Room with proper door location
Appropriate names, closets and appropriate notes
Kitchen fixtures, work triangle
Practical Design / Layout
Hardware Examples (i.e. Flooring, Cabinets, Appliances, Countertops, etc.)
Colour Samples
Floor Plan
Overall dimensions
Dimensions for the windows and doors
Dimensions of cabinets and furnishings
Total:
/2
/5
/4
/2
/6
/ 10
/4
/3
/4
/4
/6
/ 50