3348 Peavine Blvd
Bethel, VT 05032
Fax 802-234-6325
E-mail Joe@plazamachinery.com
Note: If you have a “spam blocker” that rejects my reply to your email, either give me your mailing
address or preapprove my reply
Please—if you e-mail us, tell us what state you live in. E-mails do not normally provide that information.
We will need it sooner or later to give you an idea on shipping costs.
If you place an order please tell us:
1) The page and item number if available
2) A description of the item
3) The cost of the item and shipping (it is hard when we get a check and no other information)
HHH
CHECK OUT SOME NEW LOWER PRICING
List 00276408 Our phone is presently closed. The fax line is open at all times for inquiries. Offering quality used equipment and new
domestic and European machinery at discount prices. Please notify us if you want to visit, advance notice is a must. If you would
like our Metalworking Machinery list, check on our website. http://www.plazamachinery.com Email- joe@plazamachinery.com
If you wish to correspond, use our fax 7 days a week, 24 hours a day, write, or e-mail. If you would like me to call you, give me
your number and a good time to reach you.
We take trade ins for cash or credit. We do not take consignments.
Note: If PPD is listed after an item, we pay shipping in the 48 states for this item.
All prices subject to change without notice.
RETURNS: You have seven days to return the item for refund less all shipping costs on used items returned in same condition unless
noted differently.
If you reside in or purchase an item at our Vermont address, you will be required to pay tax unless a tax exemption form is
supplied.
DISTRIBUTORS FOR:
United Abrasives sandpaper
Saylor-Beall compressors--Top American quality with cast iron pumps, price include delivery in the continental USA
We do not sell machines made in Taiwan or China
Bison metal lathe chucks and other tooling
Commander multispindle drill heads, many used in stock, very cheap, also spindles.
Baldor grinders, and buffers, great discounts, 20% off on most items, also Baldor motors, good discounts.
Northfield machinery
Quality new & used machinery in stock:
New Baldor motors 1140 rpm, single phase 1hp, TEFC, 184 frame, list over $800.00, your cost $225.00, same but ¾ hp, 145T,
$150.00
JOINTERS--Top American quality-dovetailed ways w/adjustable gibs, both tables adjust, blade guard, fence and manual.
1. Delta 32 x 6 heavy duty jointer, excellent, original stand, single phase, $375.00, machine only, $175.00
4. Delta 6 x 42 very original, open stand, original old style single phase motor, rare quality, $450.00
7. Delta 6" long bed, w/guard, original paint, 42" basic machine w/o stand and motor, $300.00
9. Delta Homecraft, very beautiful, original paint, 4" , basic machine without stand and motor, $110.00
10. Delta 4", basic machine ( no stand or motor) nice American quality, original paint, $100 (easy to ship UPS), 4 x 23.
19. Delta metal base brand new, American made with original single phase motor and push button Delta switch with red/green
rectangular buttons. This is the model where one side is angular. Comes with built in dust chute, $300.00
26. Walker Turner classic 6”, like new, original paint, original 3 belt drive, original cabinet base, single phase original motor,
looks practically unused, even decals look new, $450.00
31. Delta classic 6 x 32 with original flared leg stand, original cast iron belt guard, original single phase motor with switch rod.
Needs cleaning, $300.00
32. Delta 6 x 42 quality USA, original paint, hardly used, basic machine only, has nice cast and chromed front hand wheels, guard
& fence, $350.00
33. Very nice 4” Delta/Rockwell Delux, 27” Long, with Delta cabinet base, original paint and single phase. $375.00
POWERMATIC JOINTER PARTS
1. Cutter head guard for model 60 8” jointers, $160.00
2. Cutter head for model 60 8” jointer with knives and gibs and bearing blocks, $175.00
3. Fence for 8” model 60 jointer, $300.00
4. Hand wheel for model 60, $30.00
5. Gib for model 60, $15.00, 2 for 25
6. Raising screw for model 60, $20.00
7. Block raising screw that the screw screws into, $15.00, 2 for $25.00
RADIAL ARM SAWS
1
1. We have some used parts for 12" Dewalt and Rockwell radial arm saw, (i.e) Dewalt base & legs, $50.00, 3 phase motor for
12" Rockwell, $150.00.
12. DeWalt/Black & Decker 12" parts machine, real nice, commercial quality, arm & carriage, stand and legs, blade guard, etc. ,
state needs, good prices.
13. Parting out a 3 phase 12” Rockwell model 33-702. Center pivoting turret
Leg set $40.
Leg set with base, $60.
Motor, $125
Carriage assembly and motor, $150.00
15. Delta adapter for ½” bore items. New old stock, in the box, #33-600 $35.00
16. Rockwell adapter for ½” shank router bits, new old stock, in the box, #33-277, $35.00.
17. Delta Adapter for router bits and sander #33-601. New old stock in the box, $35.00
19. Delta blade guard for 14” Delta radial arm saw, excellent, original paint, $65.00
20. Delta leg set, new or as new, $45.00
21. Delta new 10” with stand, single phase, fairly heavy duty model, nice American made quality, $425.00 (pic)
22. New in the box, Delta, 33-448 leaf guard, $35.00
Let us know if you need items not listed
TABLESAWS
3. Used Delta 9" contractors saw parts available, also parts for old 8" contractors saw, inquire, wings table, etc.
12. Delta old style cast iron motor cover, excellent, original paint, $225.00
20. Top for Delta cabinet saw, brand new in unopened crate, #422 35 391 0002, $125.00 (Delta price $472), can ship FedEx
ground.
22. Homecraft saw, , motor or wings, without stand. Original paint, 8” tilt arbor, hardly used, $75.00
24. 10” Delta tilt tablesaw, excellent, saw only $75.00, basic machine only.
25. Unisaw original motor, fits old cabinets w/o modification, 1 hp 3 phase excellent, 1725 rpm, $25, static converter, $110.00
27. Powermatic 66 parts, have some, inquire.
30. Powermatic pair of fence rails, very beautiful for 24” capacity, $60.00, rear only, $30.00 ,front only, $45.00, long rail set,
$90.00
31. New in the box Delta Unisaw mobile base for saw and 50” Unifence #50-289 used with later model Unisaw with steel base,
$125.00
34. Rockwell 2 hp Unisaw motor, 3 phase, 3450 rpm, new style, excellent original paint, $90.00
35. Delta Delux Uniguard, $125.00, excellent.
36. New old stock Powermatic 66 doors with latch, $65.00 USA
39. Powermatic fence part, long front to back cast piece, used with round rail fence, excellent condition, $30.00, with rear clamp
lock mechanism, add $10.00. Clamp mechanism only $15.00
40. Electric motor 5 hp, 3 phase 145TC for Powermatic 66 table saw, excellent, $250.00 (reasonable FedEx ground shipping)
43. Mini Unisaw, single phase 8” full cabinet saw, were not made very long, $425.00
44. Powermatic 10” contractors saw, rare machine with fold down arms and rear wheels, original paint. No motor but has switch,
standard 56 frame motor will work without fence, $200.00. With fence, $250.00, a real classic saw.
45. Original large cast iron extension 28 x 21 1/2 excellent, all square edges, metallic green original paint, $150.00
46. New Delta 10” contractors steel stamped wings, original carton, $50.00/pair
47. Powermatic original fence, all excellent with original knobs, $70.00
48. Long round rails for Powermatic, excellent, $100.00
49. Original excellent Powermatic short rails excellent, $50.00
50. New Arbor extension for Delta 12/14 table saw 1 1/4 diameter #34-938 $125.00
BOICE CRANE TABLESAWS AND PARTS
2. Boice Crane 10” contractor’s saw, like new, basic machine only, collector’s condition, $250.00
3. Boice Crane 10” contractors saw for parts; fence parts, arbor, hand wheel, cast iron wing, front plack, etc, fair prices.
UNISAWS, (always come with 2 cast iron wings unless noted)
US2. LTA 401 01D unisaw top, some scratcher otherwise ok. $75.00
US3. Late model, 1 ½ hp single phase Unisaw Delta motor, looks very close to new, $250.00
US4. SPECIAL, original 2 hp, 3 phase Unisaw motor. Fits in the old cabinet with the “oval” motor opening, $90.00,
excellent.
US5. Beautiful, older, three horsepower single phase, $1400.
US6. Excellent saw with 3 hp single phase motor +2 wings, miter manual mag control+blade $1050 Fence options: jet lock fence
+rail add $75.00. 30” Biesmeyer add $300.00
1. Special. Delta 5 hp 3 phase unisaw “Takeoff” motor, light school use with original Delta Low Voltage magnetic control and
large rectangular green +red orginal remote, all excellent plus. $450 for the package –will separate. Note if you wish to trade
in a single phase unisaw motor, let me know.
Unisaw fences
Biesmeyer 30” for Delta unisaw, excellent plus, light home use, Delta blue/frey color $325.00
DELTA TABLESAWS
1. Delta 10 inch, cabinet saw, like new, two hp, single phase motor and cabinet. Includes, jet lock fence, mitergage, steel wings.
$600.00. With cast iron wings, add $100
2. Delta excellent tilting arbor saw, with stand miter steel wings, 1 ½ single phase original Rockwell motor and jet lock fence,
(heavier construction, compared to the contractors saw) 475.00.
POWERMATIC TABLESAWS
1. Model 62 contractor saw, basic machine only, includes fence and rails, insert, and motor mount. What’s there is excellent.
$125.00.
UNISAW PARTS—exellent used.
2. Rear trunnion bracket 422 04 014 5002, $45.00
3. Raising shaft with worm 422 04 406 0001, $55.00
4. Titling shaft with worm 422 04 406 5001, $55.00
5. Motor bracket with shaft, 422 04 314 5001, $35.00
7. Yoke 422 04 102 5001, $60.00
10. Lower blade shield, excellent, $20.00
12. New Delta 3 ½ diameter motor pulley for Delta Unisaw using 3450 rpm motors, $65.00
13. Unisaw fence bolts with spacer and nuts, set, $35.00. Spacers alone, $5.00 each, bolts alone, $10.00 each.
2
14. Electric unisaw motor, old but light use from a major university, 1 ½ hp 3 phase, fits old cabinets, 1725 rpm, $75.00
Note: If you need several parts, let us know for package pricing. We also stock: New Belts, bearings, controls, pulleys, inserts,
motors, arbor nuts, etc., matched set of 3 belts for 3450 rpm motor, $20.00
UNISAW MOTORS
2. Original 1 ½ hp Unisaw motor fits old cabinets 1725 rpm, takes 5 ½” pulley. Rare, most of these motors were 1 hp, $100.00,
excellent, original paint. (Same motor but $45.00 perhaps a good backup) 3 phase
3. Special for 1725 rpm Unisaws 5 ½ ” 3 groove diameter, ¾ bore. Excellent condition, $60.00
4. New Baldor 3 hp, single phase, top USA quality. $442.00. (List price about $1100.00) In stock and ready to ship.
SCROLL SAWS
1 Delta 24” 40-440, usually have, request stock check and price
2. Original Delta scroll saw stand for 24" saw, new $100.00, used $75.00
3. Delta scroll saw belt covers specify or variable speed for 4 speed, $60.00 each.
4. Delta original scroll saw motor for 24" saw single phase original paint, $125.00. Original Delta large button push button
switch, $40.00 (when purchased w/motor)
7. Delta 40-440 24” old scroll saw. Have many parts: if not listed feel free to inquire:
(Do not have the upper retracting cylinder)
a) Original stand, original paint, excellent. Later model, will disassemble for easy shipping, $75.00
b) Like new original motor, single phase with knob on one end. LVC mag control 110 volt with nice red/green Delta
square remote station , $180. Just the motor, $135.00
c) Tables, $5.00
d) Upper large cast arm, $30.00
10. Hold down foot assembly with hexrod for Delta 24” scroll saw, $40.00
11. Table with trunnion for Delta 24” scroll saw, $10.00
13. Delta 24” classic, very original. One owner basement shop, very light use. Single phase, variable speed, original stand,
beautiful table, tight machine, $400.00
14. Delta upper return spring assembly, for 24 “ scroll saw, excellent, $100.00
15. Delta hex for upper hold down unit, $10.00
16. Delta 24” scroll saw, original stand and single phase motor. Variable speed, original paint. One owner and looks it—hardly
used machine with some blades, $400.00
17. New late style flared leg Delta scroll saw stand, was taken out of the box and put together, then disassembled, $65.00
18. Delta 24”, very original, close to new condition. Original stand, single phase motor and low voltage control with Delta large
red/green buttons, with excellent 862 work light, $500.00
19. Very old has the 2 pipes, logo is like new, basic machine, mechanism works well, rear casting # DSS2, Delta, $200.00
POWERMATIC PARTS & ACCESSORIES
1. Powermatic sheet metal doors, original paint and hardware, excellent, 19 x 15 ¼, $65.00, 20 ½ x 18 ¼, $75.00
2. Special 2 step shaper motor pulley for 4L Belts specify 5/8 or 7/8 bore, $70.00
3. Variable speed spindle pulley for 15” drill press, $120.00
4. Variable speed motor pulley, 5/8 bore for 15” drill press, $85.00
5. Shaper spindle 2 step pulley for 4 L belt, $70.00
6. Powermatic 26 shaper ¾” spindle, $110.00
7. Powermatic 26 shaper ½” spindle, $110.00
8. Special thin belt for later shaper, $20.00
9. Knife setting device, looks new, gold casting #3042160, $60.00
10. Variable speed motor pulley for 15” drill press, 5/8 bore, excellent, $75.00
NOTE: Along with the 100+ - American made drill presses in stock, I have a lot of parts, most good used, some new. Most
Delta/Rockwell, but other Brands as well—Powermatic, Clausing, Walker Tuner, Arboga, Buffalo. The best way to inquire
on a part or accessory is to fax, scan or mail a copy of your part sheet and circle the items you need. If you do not have a part
sheet and would like a copy, let me know. It is not always necessary at times—a description will work at times.
DRILL PRESSES, ALL AMERICAN MADE, UNLESS NOTED, NO TAIWAN OR CHINESE MACHINES
ATLAS
1. Atlas original floor base, for 15” with 2 ¾” col., excellent, $75.00
2. Atlas table with bracket, some holes in table for 15” machine, $85.00
3. Atlas floor col., excellent, $75.00
DOALL/ARBOGA
Excellent compact gear head machines, made in Sweden (3 phase unless listed other)
2. Arboga, made in Sweden, gear head drill press—we are parting this one out. Ask about column, table, head parts, base, etc.
3. Arboga 20” parting out, gear sets, crank table, etc., column diameter is about 4 1/8 items P.O.R.
POWERMATICS
1. 15” variable speed, single phase bench model, $475.00, floor model $625.00, with 1/2” Jacobs chuck, model 1150, 3” column.
4. Crank elevating mechanism, for 15" drill press, $175.00, some bases and tables also available, state needs, good prices.
6. Excellent old style base, (light green), and floor model 3” column, $175.00 (we can ship Fed ex ground or UPS in 2 boxes)
15” machine.
7. New, later style Powermatic base, column and tilt table, 3” column, gold color, $375.00 (floor model)
8. Used Powermatic late model, (metallic green) 3” column, squared off style base, excellent, $200., with tilt table, $335.
10. Powermatic drill press original cast column collars for 3” column, excellent, $20.00
11. Powermatic 15” model 1150 floor model, variable speed, original single phase motor, table has minor holes, but decent, tilt
table $675.
POWERMATIC USED PARTS FOR AMERICAN MADE DRILL PRESSES
2. Cam and plate for the very old variable speed 15" machine (more details available if necessary). Speed plates are in good
shape. Paint is original light green, $20.00
5. Pinion for 15" Drill press, excellent, $30.00
6. Quill, spindle, bearings assembly, excellent, used for 15" Powermatic, $175.00, includes Jacobs chuck, (w/Morse 2 taper
instead, $200.00), with chuck and adapter, cheap price, both come with chucks.
8. Excellent speed chart for 5 speed, $20.00
9. Depth stop clamp D-70, 2.180 ID for 15" drill press, excellent, $30.00. Depth stop rod for same, $20.00
10. Original raising table screw mechanism for 3” Powermatic 15” drill press column, excellent, $175.00
11. Variable speed motor pulley for 15” Powermatic 5/8 bore, excellent, $125.00, VS spindle pulley, $125. Both, $200.00
16 Powermatic 20” table rack and rack support piece, $65.00
3
17. Powermatic 20” column clamp stop, $25.00
18. Powermatic variable speed motor pulley, excellent for 15” 1150 drill press, $90.00, 5/8 bore.
19. Powermatic single phase, ¾ hp 56 frame for 15” drill press, made by Baldor, TEFC, excellent, $150.00, low shipping prices.
21.
Locking collar for 20” (model 1200) drill press, $25.00
22.
Locking collar for VERY OLD Powermatic drillpress on 2 ¾” column, (not 3”) $10.00 each.
FOR OLD STYLE 1200 20” DRILL PRESS, all original, all excellent
1. Idler pulley, excellent, $75.00
2. Hand raising mechanism, with rack, thrust bearing and collar, $200.00
3. Motor mount, $75.00
4. Depth stop quill collar, $45.00
5. Top cover for step pulley model, $65.00
6. Morse 3 spindle, quill and bearing, $200.00
SOUTH BEND
Assorted bench models, and floor models, $500.00 and up, some parts also, beautiful 14" machines, (see South Bend drill press
parts), excellent single phase head only, $225.00,new bench column, $15.00, two for $25.00
4. South Bend Floor model, single phase drill press, excellent, $600.00
SOUTH BEND DRILL PRESS PARTS AND ACCESSORIES
4. Excellent used pinion, $50.00
5. Excellent used front top cast cover, $65.00
6. Excellent rear cast top belt cover, $120.00
7. As new bench model base with column, $150.00
8. Excellent head casting, $30.00
12. Clock spring with case, $65.00
13. Motor base, excellent, with adjusting pivot screws, $40.00
15. Excellent head only, later style, Jacobs use ½” chuck with 3 phase motor and motor pulley, $250.00. With no motor, but
motor pulley is included, $245.00. Note: can ship fed ex ground for a reasonable price.
16. Special, excellent, front top cover $45.00. Excellent original new cover $125.00 .
WALKER TURNER, inquire
DELTA/ROCKWELL
EXCELLENT USED DELTA/ROCKWELL DRILL PRESSES (Proven American made quality), None made in Taiwan or China
1. 15" 6 + 6, single phase, floor model, regular tilt table, $675.00, new list well over $2000, do not confuse with Taiwan
models! Have several with little use.
5. 14" w/non tilt table, bench model, original paint and motor, single phase, $225.00
6. 14" 220 old style, bench model $300.00 tilt table, single phase, floor model, $350.00, some options available, 115 volts.
9. 20" late style, 3 phase bench column to mount on your table crank head, variable speed, Morse 3 taper spindle, $875.00, old
style , w/Morse 2 taper spindle, not variable speed, $350.00, complete floor model, very beautiful, with chuck, late style very
slow speeds Morse 3 with ¾ chuck, $1250.00 (all come with a chuck)
19. Delta bench model column and base, 2 ¾” column. Excellent, older style with rounded back, $75.00 New style with square
back, $75.00 (very low price).
20. Late model 20” head with crank mechanism and full length column. HD 4 bolt flange at bottom. 8 speeds, light use, idler for
slow speeds, original paint. Original single phase 1.5 hp Baldor motor, speeds form 180-2000, M3 Taper spindle, ¾”
capacity chuck included, $700.00.
22. Delta 6 + 6 drill press, 15”, floor model, 3 phase with Delta low voltage magnetic control. Close to new condition, 6 speed,
6” quill travel, Delta's last production model, were over $2500, your cost, $600.00. Single phase option, new Baldor 3/4 hp
motor installed, $200.00
26. Delta/Rockwell 6+6 head only, with 1140 rpm, original single phase motor Jacobs ½ USA chuck. Delta nice square push
button switch, very close to new condition, $375.00, Same but 3 phase, 1725 rpm and Delta low vol. magnetic control,
$300.00.
DELTA DRILL PRESS PARTS
1. Excellent floor model column, (3 ½) for 17” drill press with floor model base, old style, $150.00 ships UPS or FEDEX, base
alone is available, base alone with flange, $100.00, column alone, $50.00
2. Delta ½” bore drill press spindle for 14” 220 or similar 2 spline spindles, probably not used, $75.00
3. Electric motor, old style, single phase, 1725 rpm, ½ hp, ¾ shaft made by GE, super quiet. Bolt holes are 5” across. About 5
¾ in the vertical. Capacitor start, $125.00 (fits some old 17” Delta drill presses and old H-10 South Bends).
5. Original column and base for Delta high speed sensitive drill press. Easy to ship UPS or Fedex ground. Excellent, $90.00
8. New in the box 15-835 ½ arbor for cup wheel attaches to drill press, spindle, $55.00 (uses lock on collar).
10. Brand New 41-815, Delta, slow speed 5 step, (2-6), 7/8 bore drill press motor pulley, for 17” drill press, $75.00
11. Delta 15-849 4 step slow speed attachment. Brand New in the box for Unidrill and 15” drill press. Comes with instructions
& belts, $150.00, biggest complaint “drill press runs too fast”
12. Delta brand new in the box 17-836 booster spindle return kit for 17” Drill presses beginning with serial # 137-5800, $50.00
14. Brand new in the case Delta ¼ chisel for mortise, 5/8 shank., $25.00, made in USA, 2 for $45, 3 for $60., #11-634.
15. 15-803 new in the box, slow speed attachment for 5/8 motor shafts, $225.00 (small fraction of the original price), belts are
also included. Eight speeds from 125 to 5800 rpm with 1725 rpm motor. Eight speeds from 85 to 3800 rpm with 1140 rpm
motor. Post Paid in the USA.
16. New in the box, slow speed attachment, fits on 2 ¾ column, belts included. 15-848 Rockwell Delta multispeed attachment,
$165.00, four step 4L belt style.
18. Original, “ships wheel,” 3 spoke for old VS drill press, excellent, $45.00
19. Variable speed motor pulley for 15” later style drill press, excellent, 5/8 bore, more details if needed, $140.00
20. Table for 20” USA delta tilting type, excellent, (minor holes), table only, $175.00, original.
21. Slow speed spindle pulley for Delta 220, 4 speed machine, excellent, $55.00. Assembly with bearing, $75.00, high speed
pulley, $40.00, assembly, $65.00
22. New Delta 4 step pulley, #47-165, $45.00
23. New Delta 5 step, 2-6, 5/8 bore #41-813, $70.00
24. New old stock, spindle high speed pulley for 220 drill press with bearing and spline, $85.00
25. New 220 spindle for cup wheels, #991, 2 splines, $60.00
26. New 220 spindle for ½” router bits or used with old mortising attachment, 2 spline, $75.00
4
27. Stop rods for older 17” Delta, special, $35.00 each, excellent.
29. New in the wrapper, pinion for late style 17” Delta/Rockwell drill press, $95.00
30. New in the box Delta drill press cast iron column stop for 2 ¾” column., $30.00 each, two for $50.00
31. New in the box 20-630 gear driven slow speed attachment with Morse 2 driver, $375.00
32. Excellent Morse 2 lower spindle assembly, $150.00 with quill and female spline piece, add $75.00
33. Delta Hi speed drill press base (I think # 14-840), new in the original box. Beautiful USA quality,$100.00
34. Drill press table, 15-809, $225.00, bracket is included.
35. Excellent quill for Delta/Rockwell 6+6 drill press, (15”). $60.00 excellent
36. pinion+hub for 6+6 $65.00
37. New Delta quill for 6+6 $85.00
38. As new, quill clamp for debth stop rod for 6+6 $40.00
39. Debth stop rod for 6+6, excellent, $45.00
40. Original cast top cover for 14” Delta, (220) w/large spindle pulley, excellent. Includes special hinge. Rare item, note a small
piece along the bottom of the side has been neatly cut out about 1/4X2” I did not notice at first. $100.
41. 41-932 New in the box, variable Speed motor pulley assembly, with ball bearing $120.00 ½” bore.
42. Brand new debth stop rod with 2 knurled nuts+washer $75.00 for old 17”
Parts for 15” Delta Drill Press
a.New in the unopened box 5/8 variable speed motor pulley 14-953, $145.00
b.New in unopened box ½ inch bore motor pulley assembly for 15 inch variable speed drill pressband 41-952, $90.00
BURGMASTER TURRET DRILLS
1. Small bench model, excellent plus, single phase, $600.00
DELTA STAND ITEMS
1. New original set of Delta flared legs, (4), 31 ¼ long, $35.00
2. Delta flip up caster set for flared legs, used on Delta light duty open stand shaper, could use some clean up, $75.00
CLAUSING
Clausing American made 15 and 20" drill presses
1. Floor model, variable speed, has excellent large production table, forward/reverse drum switch, painted green, $450.00
3. We have several parts for the 20” machine. Please inquire, part numbers can help.
5. 20” Clausing floor model, excellent, crank elevating production table, Morse 3 taper with chuck. Two speed motor, 230 volts,
excellent heavy duty USA machine, variable speed, inquire for more details.
CLAUSING DRILL PRESS PARTS for 15” 5 SPEED MODEL. PARTS ARE EXCELLENT USED ORIGINAL
1. Motor step pulley, 5/8 bore, $65.00
2. Spindle step pulley with bearing and spline bushing, $85.00
3. Quill,bearings and spindle, Morse 2 taper, $165. (add $40 for Jacobs ½”)
5. Clock spring with housing, $50.00
7. Depth rod with nuts, $40.00
8. Pinion and hub, $30.00
11. Quill clamp, holds the depth stop, excellent for 15” machine, $40.00
12. Head clamp assembly, 4 pc. All original and excellent, $35.00 for 15”
13. Quill lock handle, excellent for 15” machine, $25.00
14. Depth scale, not new but excellent for 15” machine, $8.00
15. Clausing drill press raising mechanism for table, 15” machine, 3” column, excellent, original, $225.00
16. 35X25 machined surface 30X20 could have many uses, 1 or 2 heads etc webbed design $65.00
17. Floor model, 15” Excellent plus. Table looks like new, single phase, 5 speed. Column has some slight pitting, otherwise very
beautiful, with jabcobs ½” chuck. $875.00
18. Clausing 15” head 3 phase 5 speed $425
19. Clausing 15” morse 2 spindle w/quill + bearings $276.00
BUFFALO
2. 15" bench model, heavy cast base, crank up head, nice, no intermediary tables are used on this model, 3 phase, $100.00,
single phase, $200, you install motor.
3. Buffalo floor model base $75.00 (more parts inquire).
BUFFALO DRILLPRESSES + PARTS
1. Base, floor column+table, all very, very close to perfect and original $150.00. (can sell all or part)
GENERAL DRILL PRESSES (made in Canada)
1. Excellent floor model, single phase, made in Canada, $650.00
SPECIAL SECTION, Many excellent parts for 17” Delta drill presses old style
b. Floor model column, $50.00 ( 3 ½”), bench model col. $20.00
c. Slow speed spindle pulley 5 steps 4 3/8-8 ½, $80.00
d. Slow speed motor pulleys 5 steps, 2-6 ¾ bore, $65.00, new 5/8 bore $70.00, new 7/8 bore, $80.00
f.
Clock spring with housing and worm gear, $45, add $5.00 for top cover, w/o depth scale.
g. Depth stop clamp, $30.00
h. Depth stop rod, $30.00
i.
Top cover, $20.00
j.
Bottom cover front & back, $20.00
k. Cast flange connects column to base, $30.00
l.
Motor mount, $25.00 with pins
m. Crank handle for table raise, $30.00
n. Worm with bolt for clock spring adjustment, $20.00
o. Pinion with hub, specify length for quote.
p. Column collar, $20.00, new $25.00
q. Rack, specify thickness, $35.00
r.
Column thrust bearing for table or head raise, $40.00
s.
Table bracket complete or part, inquire
t.
Tables, different types and condition, inquire
u. Quills and spindles, different types, some new, inquire, have several options.
v. Spring clip for top cover, $5.00
w. Square D 110 v mag control, late model, nice, size 00 with NEMA 1 enclosure, original paint, $25.00, 2 for $45.00
5
x. Original Delta motor shaft cap., 3 bolt mount, $20.00
y. Compound gear for table raise, (specify diameter of smaller gear there were 2), like new, $90.00
z. Upper section of spindle, has male spine, $35.00
aa. Quill, $45.00
bb. Centerpiece of spindle, female splined, $20.00
cc. Good used lower part of spindle. Morse 2, $100.00
dd. Depth stop clamp, rod and 2 stop nuts, $75.00
ee. Slow speed attachment, 17-860 for 17” drill press, excellent $175.00 But no driver…you need one. (may be for parts only).
WALKER TURNER DRILL PRESS PARTS, (FOR 15” UNLESS NOTED)
1.
Clock spring case without spring, $10.00
2.
Spindle, quill & bearings, excellent, J33 type, $85.00
3.
Top cap., sheet metal type, $25.00
4.
Motor mount,$15.00
6.
Table, some holes, $50.00
9.
Base, for floor model, round design, $80.00 excellent.
10.
Base, for bench model, $55.00, excellent.
11.
Complete depth stop assembly, including rod, 2 nuts, and quill clamp, excellent, $55.00 (ask for quote on indiv. Parts)
12.
Spindle, quill and bearings with ½” Jacobs chuck, $95.00
13.
Spindle pulley, $45.00
14.
Motor pulley, $45.00
15.
Both pulleys, $75.00
16.
Top spindle cap, $20.00
17.
Pinion with spoke wheel, $45.00
16.
Quill lock, $20.00
17.
Head casting, $20.00
18.
Depth stop clamp and rod, $40.00
21.
WT 15” drill head casting only, excellent, $20.00
22.
Pinion for 15” WT drill press, excellent, $40.00
23.
Column lock assembly for 15” WT, $30.00
25.
Quill lock assembly for 15” WT, $30.00
26.
Complete depth stop with quill clamp, $60.00, excellent.
27.
Upper pulley special bearing excellent, $40.00
28.
Excellent quill bearings and spindle for 15” WT drill press, has 33 taper for chuck mounting. $100.00
29. Original clock springs with housing $75.00
30 wheel spoke, with 2 knobs, excellent $30.00
31 Rear original cover, original paint one hinge needs a new spot welt. Excellent $90
32. Main casting, excellent $30.00
33. Quill, bearings and spindle, excellent $125.00
34. Short column $15.00 cast bottom bracket $15.00
35. Pinion excellent for 15” machine $45.00
36. Screw for raising mech, excellent. 14” long, for 15” machine. $40.00
37. Gear cover 15” walker turner raising mechanism, excellent. $40.00
38. Complete WT head raising mechanism. $135.00
39. Headraising mechanism, complete for 15” excellent $135.00
PARTS for 20” Walker Turner Drill Press
1. Base, $85.00 .Floor model column, $75.00, both $150.00 (can ship fed ex ground)
2. Motor pulley, $50.00
3. Motor mount, $40.00
4. Clock spring and housing, $65.00
5. Pinion, $80.00
6. Quill and M2 spindle assembly, $120.00
7. Spindle pulley, $75.00
8. Rear cover, $60.00
9. Inquire for other parts.
10.
Spindle pulley with bearing assembly $85.00
11.
Motor mount assembly $50.00
12.
Motor pulley $70.00
13.
Pinion $60.00
14.
Excellent morse 2 spindle and quill $170.00
15.
Clock spring. $75.00
16.
Belt cover $40.00 (needs painting)
17.
please as for other small parts
18.
hub for pinion $20.00
DRILL PRESS PARTS AND ACCESSORIES
1. We have several Commander heads in stock, mostly model 900"s, also spindles and related items, new & used, head, model
900 no spindles $10.00, drill more than one hole at a time, real cheap prices, state needs, have a like new 700 head, $325.00
with spindles.
2. Rohn-made in Germany-close to new 5/8 cap to ‘O,’ with 5/8X16 threaded back. $50.00 same but ½ capacity $40.00
9. New and used Jacobs chucks in stock. ½ Jacobs, used, $55.00,, large chucks available w/Morse 2 shank add
$6.00, or M3 shank, have many up to 1" capacity inquire for pricing, have over 300 drill chucks, also Albreights, or see Metal
list.
13. Delta slo-speed attachment for 17" drill press, excellent, 17-860, $350.00, (New Delta List, $1424.90), new one $450.00
16. Excellent used 5 and 6 step Delta Drill Press pulleys ( some new as well), inquire for pricing, large and small.
6
18. Complete raising mechanism for 17" Delta drill press, used on head or table, $150.00, , bearing and collar, $45.00, combo
gear, $85.00
19. Chisel holding bracket for mortising attachment, fits 1 5/8 quill, nice American Quality, $20.00
20. Floor model Clausing drill press base, (for 3" column) $90.00
21. Motor mount for old Delta 17" drill press, $25.00, old style, 2 pins, non tilting, $10.00
22. Excellent table, base and column for bench model drill press, column is 1 5/8 old American item, $20.00,
24. Quad head w/quill and spindle for Delta 6+6 or similar variable speed 15" drill press, $50.00, rotates & indexes, new over,
$1000.00
25. Quad head w/driver for Delta 17" late model, (US made), drill press, $75.00 (Driver is for Morse 2).
29. Old style cast iron top front pulley cover for 17" Delta, $30.00
30. Foot feed for 17" Delta, excellent, parts only, inquire with needs.
31. Foot feed for 14" Delta, excellent, inquire.
33. Delta large production table crank elevating design, excellent plus condition. Have new ones for 17", good deals.--new in the
box, way below Delta pricing, check with us
36. Walker Turner chisel holder casting for mortising attachment, $30.00, check quill dimensions.
37. New Delta motor pulleys, 5 step for 17" drill presses, specify bore, $75.00, high speed, possible spindle pulley bores in 5/8 or
7/8, may have others used, nothing new in ¾ bore.
39. 11-969 Drill Press Pilot wheel for 15" drill press, was $89.46, now $55.00, new
41. Albreght chucks, made in Germany, the best, keyless, dismantled, cleaned , excellent condition ½” capacity, $100.00, new
about $260.00, with M2 shank add, $10.00, with R8 shank add $23.00s
44. Buffalo 2 pc. Top cover for 15” later model machine, spring loaded flip-up, excellent, $25.00
45. Delta hinged bracket assembly for old 11” Delta drill press used on their old combo table saw, mounts on the side of the saw
table, accepts their 1 7/8” column, $10.00
46. Delta drill press table for 11” machine with 1 7/8 column, very minor holes, excellent, $55.00
47. Rockwell new, American made drill press table for 15” machines, 15 x 11 ¼ has the nice clamping area on the two sides.
Delta #402 04 091 5004. These tables fit the 6+6 and other Delta 15” drill presses, $150.00 (ships UPS or similar).
49. Cast top cover labeled Rockwell/Delta for 11” drill press and small US made radial drill press excellent and original paint,
$65.00
50. Sears drill press spindle pulley, like new, uses the very thin belt. 8 speed, $30.00
51. Powerfeed for 20” USA made Rockwell/Delta drill press, air driven. Rockwell # 15-101, $60.00, I have 2, both for $100.00
52. For later style 17” variable speed drill press with large center dial. Variable speed pulley with upper splined spindle and
bearings, $200.00
53. Excellent quill with Morse 2 lower spindle and female splined joining piece, $160. Spindles will be checked.
54. Morse 2 Lower spindle for 17”, checked prior shipping, $100.00
55. Old style quill only for 17” drill press, excellent, $35.00
56. Excellent 5 step pulley, DP 626 for high speed 17” drill press, 2 5/8- 6 3/8, 5/8 bore, $55 (ask about other bores), same but
unused, $75.00
57. Base & column assembly for Delta high speed sensitive drill press, excellent, $40.00
58. New spindle for 6+ 6 drill press, Delta, $200.00, J33 type (male taper).
59. New original Delta 5 step drill press pulley 5/8 bore, 41-823, SPECIAL, $55.00. Steps are from 2 ¾ to 6 ½.
60. New original Delta 6 step pulley 5/8 bore 41-833, steps 1 ¾ to 7 1/8, SPECIAL, $55.00.
62. Arboga drill press column, made in Sweden, about 4 1/8 x 5, with 4 bolt bottom flange, $50.00
63. Hold down clamp original USA made, like new for Delta and others with 2 ¾” column, cam activated, $30.00
64. Delta, new in original carton, starter or switch bracket, $25.00 (may have several), #20-614.
65. Foot feed, excellent, Delta for several 14/15” machines, $200.00
66. Delta 42” column for 20” drill press 3 ¾ diameter wall thickness ½” very heavy duty. With 4 bolt hole bottom flange, $55.00
67. Delta 20” DP rack and swivel thrust bearing assembly, excellent, $85.00
68. Walker Turner 20” drill press base, excellent, $120.00. Floor model column for same 3 ¾ diameter, excellent, $100.00, both
$200.00.
69. Delta 220 mortising attachment, looks to be new, $150.00 with new ½ bore spindle, (also can be called router bit spindle),
$200.00
70. Brand new old stock spindle, quill, bearing assembly, 20-240 for 20” Delta drill press, Morse 3, $325.00, two for $600.00
71. Brand new old stock 15-850 Delta crank elevating production table, with crank rack & pinion. Beautiful piece for 2 ¾
column, $400.00
72. Walker Turner head raising mechanism, excellent, original, $120.00
73. General #825 drill grinding attachment, excellent, $20.00
74. Hout drill index, new, in box, USA 29 piece case only 1/16-1/2, $15.00
75. Pinion from 1150 drill press from $30.00 to $65.00
76. New or close in orig. box General #840 Dowling jig. (USA) $25.00
79. New in the box, craftsman (general) drill sharpening attachment #9-6677 1/8-3/4 directions included $35.00
Parting out several 17" late style Delta/Rockwell drill presses
1. Complete top cover assembly w/hinge & bottom plate, excellent, $60.00
3. Worm & pinion compound gear for table raise, excellent, ,specify dimensions, there are two, like new, $85.00.
4. 5 step spindle pulley, P.O.R.
5. 5 step motor pulley, 7/8 bore, $75.00 (check for other bore size)specify high or low speed or give dimension.
6. Some spindle and variable speed pulley components also, fax or write w/requirements, fair prices, good used.
7. We have many milling machines, ask for List "ML", or see website., fair return policy.
Commander multihead, largest, model 1200, excellent, $250.00
NEW DELTA ITEMS (in original Delta box unless noted):
2D. 34-641 blade guard for 10” bench saw, $50.00
3D. 50-136 Motor plate for enclosed steel stand, $45.00
4D. 34-569 Clamp attachment for miter gage, $30.00
5D.
Variable speed kit for converting 24” scroll saw, $120.00
6D. 1459 Plate to mount 1320 switch to Unisaw, $40.00
7D. 49-318 Starter mounting bracket (believe for drill press), $35.00
9D. 43-803 Special pulley for motor on light duty Delta Shaper, ½” bore.
10D. 43-804 Special motor pulley for light duty shaper, ¾ bore, $30.00
11D. 43-805 Special motor pulley for light duty shaper 5/8 bore, $42.00
7
12D.
13D.
14D.
15D.
16D.
New Delta helical gears for wood/metal band saw, inquire.
28-243 Belt guard, $15.00
33-989 Caster set, $100.00
49-589 Dust collector adapter, used on sander, $35.00
31-425 back stand idler, build your own 4” edge sander, brand new with all hardware and part sheet, $200.00, shipping in the
USA, $21.40 (pic)
17D. Pair of new black plastic Delta hand wheels. 3/8 bore with slot, $55.00 ($35.00 for one). Used on 9” contractors saw, etc.
18D Full extension spindle, (enable to drill outside the circle. Excellent. $100.00 each 3 for $225.00
19D. New 375 spindles, in the box $90 3 for 225.00
20D. Model 700 head, like new $375.00
DELTA SHAPER PARTS
1. New in the box LD Delta Shaper motor pulley, ½ or 3/4 bore, 43-805, $55.00
3. Many original parts available for HD model:
Like new rubber bushings for motor mount, $10.00 each
Cast motor mount, old style, $30.00
Pointer assembly, $10.00
Inquire for cast wings, raising mechanisms, fences, hand wheels, etc.
4. For old style heavy duty shaper, main mechanism, including mounting post, raising mechanism, spindle cartridge housing and
motor mount, excellent, $175.00
DELTA HD SHAPER PARTS
1. Top, some small holes, $75.00
2. New in the box Delta 2 speed motor pulley 7/8 bore $90.00
3. Main casting that bolts to the top, $125.00
4. Delta LD shaper pulley, ¾ bore 43-804 new inbox $45.00 (for motor)
5. Delta LD shaper pully, new in the box 43-803 ½ inch bore $45.00 (for motor)
6. Many other small parts available, let me know what you need( Detailed description and part # if possible).
7. Delta HD old style shaper bearings cartridge single pulley, new bearings $150.00
9. For older HD Delta shaper, brand new in the original box router bit adapters for ¼ or ½” bits, 43-824, $160.00
DELTA STANDS
1. New old stock Delta flared leg stand. Possibly for 9/10 radial arm saws, shelf and top 18 x 27, leg height 29”, perfect with
hardware, $70.00. Broken down, ready to ship.
2. Set of 4 new Delta 12” Radial arm saw legs, $55.00, shipping $12.50, 48 states.
3. Set of 4, 24” flared Delta legs, $35.00
SHAPERS & OVERARM ROUTERS
1. Delta shaper, like new 3hp 1075.00
2. Boice Crane shaper, very original, original paint, original fence and 1 hp single phase motor, ¾” spindle, classic USA quality
machine, $450.00
5. SCMI HD 3 phase 2 speed motor, ¾ spindle, nice heavy table made in Italy, comes with fence from older Northfield,
customer will drill table for fence. $800.00
10. Delta old style HD wood shaper cabinet. Excellent, no dents, original paint, cast iron rim on bottom, no doors, $85.00.
(check with freightquote.com—Class 85, 100 lb, my zip is 05032. I have loading docks.
11. Delta HD shaper, very basic , may be nice for dedicated set up. Not original doors, just covers. No fence, 3 phase, no wing,
runs well. I have some trouble reading the motor tag. I believe 2 hp, very large original Delta motor, ,$325.00 For wing add
$50.00, for ¾ spindle, add $75.00. Has a ½” router bit adapter.
12. Brand new Delta HD shaper cartridge old style with 2 speed pulley, $275.00 with new ¾ spindle, $400.00
14. Delta, light duty shaper. Made in the USA. ½” spindle, original fence reversing switch,1/2 hp, no stand, old with the cast legs,
$275.00
15. Very old Delta LD shaper, excellent,inquire.
18. Many parts for USA Delta LD shaper, inquire.
19. Delta light duty shaper, with original stand, fence and single phase ½ hp motor. Excellent condition with router bit adapter
and 1/2” spindle, $400.00.
21. Delta HD shaper with 2 speeds, 3 hp single phase ½ and ¾ spindles. Delta low voltage magnetic control. Large fence with
dust chute, standard side wing. Nice machine, $1075.00
22. Powermatic ¾ spindle with nut, $140.00
23. Delta late model light duty shaper, single phase, reversible, 1 hp. Has nice original fence and router bit spindle for ¼ shank
bits. Looks almost new, nice USA built item. Also has Delta made flip up caster set, $350.00 (checking for additional options
I may have for it).
24. Powermatic shaper. Very clean metallic green, includes the following only: beautiful top, cabinet, cabinet door, original fence,
complete raising mechanism, and extension wing. $400.00. No spindle, no motor, no pulleys (may have some items for
additional cost, do not have a motor pulley at this time)
CUTTERS
1. All Cutters are new in the box
2. All cutters are made in USA unless noted
3. J (Made in Japan)
4. All Deltas are carbide unless noted other.
b. Freeborn MT 54-003, ¾ bore, raised panel, tantung for ¾ material, $125.00
c. Freeborn PT 14-003 tantung 1 ¼ bore, $175.00, raised panel
g. Delta door lip 43-900, $30.00 ¾ bore
j. Delta door lip 43-991, $30.00 (J), ¾ bore
k. Ogee Delta/Rockwell 43-996 (J), ¾ bore, $60.00
l. Delta/Rockwell door lip 43-993 (J), ¾ bore, $30.00
p. Delta 12 pc spacer set, 43-309, $25.00
GRINDERS, American Made Only, hard to find, 20% off on new Baldor grinders.
3. Baldor 6" slow speed 1800 RPM, in stock, super special, Deluxe model, single phase, 20% off.
5. Delta Rockwell new cast iron end wheel housings & covers for American made 10" grinder, 4 pieces, $10.00
6. Grinder accessories, original new Delta wheel dressing attachment w/o the diamond tool, $50.00
18. New in the box 23-841 Al. oxide 46 grit grinding wheel for 6” tool grinder grade G, $20.00
8
19. New 24-805 Delta diamond, in original Delta carton, $30.00
20. New Delta 24-973 white 1 ¼ bore 6” dish grinding wheel, $5.00, 3 for $12.00
22. Brand new in box Delta step pulley for grinder ½” bore #24-817, $40.00
26. Delta drill grinding attachment for their 7” grinder, excellent, original, with directions, $225.00
27. Delta carbide tool grinder, old style table with trunnions, gage for the original handles and spacers, excellent, $125.00
28. New in the box Delta Al.Ox 23-701 10 x 50 mm , 220 grit fine, $40.00 (about 2” face)
29. Delta NOS Carbide tool grinder tables 412-03-091-5002, $75.00 each, two for $125.00
33. As new Delta table for late style carbide tool grinder #412-03-091-5002, $75.00, shipping in the USA, $15.00
34.. Excellent as new table for Baldor carbide tool grinder with trunion mounting bolts, $75.00
35. New Delta Aluminum Oxide 4” cup wheel 60 grit, 1 ¼ bore, #24-974, $10.00, three for $25.00
37. Delta all cast iron grinder base, excellent, cleaned and painted, $175.00 ($150.00 with Delta grinder purchase).
39. New Grinding wheels: Norton 7 x 1 x 5/8 A 120 grit-M7VBE, $7.00
PARTS FOR DELTA AMERICAN MADE 6 x 48 SANDERS AND 12” DISC SANDERS , OR COMBOS
1. New Delta drum ½, for drive drum on bottom, $65.00
2. Have many parts for aligning and raising idler drum assembly. Inquire with needs and for prices. Many other parts as well.
3. Cast sub base for 6 x 48 belt, $45.00
4. New lower drive shaft, $40.00, used $25.00
6. Original black new hose, 3 3/8 OD. Length, 21 ¾, $20.00. Same but 18 1/8 long, $20.00 (both, $35.00)
7. Cast flange used on sander as well, height 2 1/4 , fits inside black hose, $20.00
8. New in the box 12” disc with hub, ¾ bore with sand paper #31-034, $135.00
PORTABLE MACHINES
1. Bosch Router with base, #90099M, 7 amp, 23,000 rpm home shop use, made in USA, $75.00 with carbide bit.
2. Stanley router, excellent, H39-B, $60.00
SANDERS
5. New 52-611 Delta late style cabinet sander stand, used on 31-730 or 31 550 in original carton w/pushbutton switch and
single phase motor, 1 ½ hp. Current list, $612.00, your cost $300.00, a bargain,ships motor freight (to go UPS would have to
reinforce carton)
10. Upper idler casting for Delta 6 x 48 belt sander, excellent, $30.00, castings only, with shaft bearing and wheels, $165.00,
rebuilt if needed.
11. Lower wheel, excellent, both ½'s, $80.00, upper pair excellent, $80.00
18. New in the box Delta Stand for 12" disc sander 50-139, $120.00 (way below list), can ship UPS, cabinet style.
23. Delta 12" disc sander parts, base casting 416 02 005 0001, excellent Delta list, $192, price, $60, lower guard, 416 02 054
0002, Delta List, $184.00 price, $45.00 (also called table support), check on other parts.
34. 3” belt sander, bench mount, single phase, HD TEFC motor, 10” platten, runs very well, some new belts included, $235.00
36. Max, heavy duty osc. spindle sander, like new, original paint model OVS one spindle 4”, no inserts, $1000.00
39. New in the box Delta sanding drum with belt, 46-681 3” diameter by 1 with 5/16 shank, $10.00 each, 3 for $22.50
40. State 15 inch disc sander, excellent, crank table tilt and crank table elevation. $900.00
41. Delta/Rockwell 1” sander. Excellent, some new bearings and wheels, single phase ready to go with belt. $400.00 original
paint
42. Also have new wheels+bearings for the Rockwell. Delta 1” sander. Large $24.00 small $22.00
SURFACE GRINDERS (and accessories)
U
U
U
U
U
GRINDING WHEELS
1. Delta 22-843, 4” special, $30 each two for $50.00 (can be in this lot)
2. Delta, new drip oiler 24-906 $50.00
3. Delta 6” AlOxide 11/4 bore dishwheel $7.50 each 2 for $12.00
PARTS FOR DELTA 6 x 48 BELT SANDERS AND COMBO SANDER
3. We have many parts for the Delta/Rockwell 6 x 48 sanders such as: New bottom drum ½, $50.00, new bottom drive shaft,
$40, many other parts as tables, brackets, upper drums, etc. inquire. Table & bracket for belt, $175.00
4. New idler shaft bearings with extended inner races, $10.00 each.
6. Square tube housing for spring used on belt sander, $20.00
7. Hub for 12” disc ¾ bore, excellent, $40.00
8. Disc and hub 12”, $120.00, ¾ bore.
SANDING BELTS AND SANDPAPER (all New)
1. Belts 1 x 42, 80 grit, $2.00 each
2. Belts, 1 x 24, 3M, $2.00 each
3. Many other, different grits, state needs.
SANDPAPER—all made in the USA unless noted other. All new, all stored in a dry heated building.
1SP. Norton 4 x 54 60 grit belts, $10.00 for 3
SHEET METAL EQUIPMENT
1.
Tensmith special 18 brake, has separations in the brake. Like new USA made model #CB18 $275.00 ser 0430 20 gaga
2.
Pexto, very heavy duty, bench clamp mount, turning machine with several dies. Excellent condition, my guess is lite use.
Model #622-E $300.00
8. DiAcro 36 inch jump shooter. Excellent. $1000.
ELECTRIC MOTORS (ppd--means we pay shipping in 48 states)
SPECIAL REDUCED TABLESAW MOTOR PRICES
New Baldor unisaw motors .single phase, special mount. 3 hp, $342.00 plus $45.00-$65.00 for shipping 48 states. Stocking 300
American made motors such as:
1 New matched set of 3 Unisaw belts for 3450 rpm motors, $20.00.
5. New ¾ hp single phase, good for drill presses, 1725 rpm, totally enclosed, $225.00, ships UPS, Baldors, 1 hp $240.00, 56
frames, both Baldors.
7. Super cheap prices on new & used three phase (i.e.) new Delta ¾ hp, $20.00, three phase, old style.
8. New ½ hp DC with control box $250.00; ¾ hp, , Baldor or Leeson, while stock lasts.
13. New Delta ¾ hp 3 phase, was on a new jointer, $65.00, get a back up at this price, variable speed.
17. 3 phase right angle gear motor output RPM 36 ¼ hp like new, $25.00, could run a small metal cutting bandsaw.
19. New Delta (Baldor) 3 phase ¾ hp TEFC 1725 rpm, motor $65.00
U
9
22. Like new old Delta 66 y frame 1740 rpm, ¾ hp fits most old 17" drill presses, 3 phase $30.00, single phase, $200.00, New
Baldor available also, inquire, in stock ½ hp and ¾ hp, new $250 and $290, ¾” shaft.
23. Used 5 hp 3 phase for Powermatic 66 table saw, excellent, 5 hp, $275.00.
28. Late model 3 phase, 1 hp, 3450 rpm motor from Powermatic 8" jointer, excellent, TEFC, $15.00
32. Very original Delta 1 ½ hp 3 phase 1725 rpm motor for Unisaw. Fits in old style cabinet, $75.00, (good for back up).
38. New, inline, Bodine single phase 1/3 hp gear motor, $80.00, great for small metal cutting, bandsaw
39. New Motortronics programmable inverters, made in Taiwan, 1 hp cap., single phase, input 3 phase variable speed output,
$200.00, post paid in the 48 states.
40. Baldor 1/3 hp 56 C frame 3450 TEFC motor, excellent, single phase w/ switch, nice for a pump or small dust collector, $35.00
41. Almost new 3 phase 208-220/440 Baldor TEFC 184 T frame, 1140 rpm motor, M3614T, new list 441, your cost, $135.00, 2
hp, slot that drill press down 33%.
42. New, old stock, 1 hp single phase TEFC Baldor 184 frame, 1140 rpm, (List over $800.00), $225.00, a bargain, 74 lb.
43. Baldor 5 hp 184 T frame, like new, 3450 rpm TEFC (from Powermatic 18" planer) 3 phase, $90.00, nice metallic green.
46. Unisaw original 5hp 3 phase motor, excellent, 230/460 volts looks close to new, $275.00
47. Original ½ hp Atlas single phase motor, excellent, capacitor start, 1725 rpm, $85 plus $14 shipping.
48. Sear/s Craftsman old style, double shaft with switch, very clean, ½ hp, 1725 rpm, single phase 110 volt, with switch, $65.00
49. Delta 1/3 hp 1725 scroll saw motor with switch, single phase, double shaft with knot on end, could use paint, $75.00
50. Baldor HD DC motor 1725 rpm 90 Volt Arm., 100 volt field., regular base as well as “C”face mounting, 56Cframe TEFC,
$150.00
51. Franklin Electric, nice clean 56 frame 3 phase, 1 hp, 3450 rpm 5/8 shaft, 220/440, $15.00
52. Baldor 2 hp 3 phase, 3450, TEFC, 145T frame, very nice motor, $90.00
53. Westinghouse, ¾ hp single phase, dual ¾” shaft fits the old 17” Delta drill press and some other old machines, has end cap.
1725 rpm, $85.00
55. Baldor, TEFC, 3 phase, 3 hp, 182T frame, 3450 nice HD motor, $95.00
56. Rockwell ½ hp 3 phase, 1140 rpm 56Y frame, painted, $35.00, set some slower speeds, nice for a drill press
57. Howell, ¾ hp, 3 phase, slow speed 1140 rpm, 56 frame, very nice motor 208/220 volts, $65.00 (Clausing color).
58. Brook Compton Parkinson Motors, made in England TEFC, 60 hertz, like new, metric frame 3D 112M, 3470 rpm, 230/460
volts, 4 kw output, 13/6.5 amp. Beautiful motor, $60.00
59. Baldor, single phase, 143T frame, nice motor, ¾ hp, slow speed, 1140 rpm, $150.00
60. Rockwell single phase 56 frame, 5/8 shaft nice motor original paint, 3450 rpm, $50.00. Could be used on a small table saw,
jointer ½ hp
62. New old stock in the box BALDOR ½ hp 1725 66 frame old style frame single phase L3576 M TEFC, 115/230 volts $250.00
63. Beautiful 11” Logan single phase motor ½ hp 1725 rpm complete with cord, drum switch and original 2 step Logan pulley,
$225.00
64. New in the box, Magnetek, ½ hp 1725 rpm auto reset, resilient base, 115/208/230 volts reversible 56 frame 5/8 shaft sleeve
bearings, made in the USA, $110.00
65. US motor late style nice 3 phase motor 208/230/460, 254T frame, finned motor, 15 hp, $150.00 (could make a nice converter).
67. Leeson single phase mechanical variable speed gear motor, 0-400 rpm TEFC motor, ½ hp, 5/8 output shaft. Preferred
direction facing shaft is CW. Like new. Gear shaft is in line with motor shaft, $225.00, good to convert a wood bandsaw to
metal cutting.
68. As new Craftsman motor, was put on an machine new and never wired, ½ hp, USA made, 1725 RPM, 56 frame, dual shaft ½
+ 5/8 single phase, $80.00, good for a drill press, small lathe, etc.
69. New in unopened box Craftsman, 1725 rpm 56 frame, ½ hp, dual shaft ½ +5/8, $120.00
70. Special ¾ hp 3 phase 56 frame motor with new KB inverter for phase conversion and variable speed, $200.00 for both.
71. GE 1140 rpm resilient mount 56 frame1/3 hp (large motor), excellent, 5/8 shaft, single phase, cap start, $180.00
72. New, old stock Baldor DC 90V 1725, ½ hp, 56/56C frame, heavy duty 6 Amp TEFC $165.00
73. Daton single phase 115 volt in line gear motor ½ hp, 90 rpm output. Excellent, could be used to slow a band saw down to cut
metal, $140.00
74. Delta/Rockwell original single-phase 1/3 hp scroll saw motor. Original paint, excellent, double shaft with fine adjust knob,
$175.00
77. Leeson 1 hp 1725 3 phase 56 frame 220/440v, $25.00
78. Dayton ½ hp 56 frame 1735 rpm 3 phase, $15.00
80. New in the box—Baldor ½ hp single phase dual voltage 1800 rpm 56 frame, excellent for small South Bend lathes, some drill
presses etc. Model L1304, $220.00 (low price FedEx ground shipping, commercial delivery can help). New USA drum
switch, easy to wire, $45.00
81. Baldor 3 phase 56 frame explosion proof, 1.5 hp, 1725 rpm, excellent, $150.00
83. Howell, 12 volt DC, heavy duty full size 1/3 hp 860 rpm, explosion proof (used to wind up a heavy hose on an oil delivery
truck, excellent and clean, 5 minute duty cycle, $75.00
84. Fincore 1/3 hp DC 1725 rpm motor with Leeson variable speed rectifier. Both almost new, 5/8 shaft wired for 110 AC input
and ready to go, $250.00 for both.
85. Excellent Hoover HD ½ hp 1725 single phase ball bearing motor, 118E frame, original paint, close to new condition (looks
like the old Walker Turner driver motor), $175.00
86. Craftsman vintage double shaft with switch in base, single phase, excellent, 1/3 hp 1725 rpm, $60.00
87. Ingersoll Rand 5 hp, 230 volt, 3450 rpm, 56 frame, compressor duty motor, excellent, single phase, $150.00
88. Very beautiful HD cast iron late model 1725 2 hp TEFC 3 phase 184T frame motor, $100.00
89. Westinghouse, single phase, ½” shaft, 1725 rpm, 1/3 hp, excellent, $45.00
90. Original, Walker Turner, “Driver” motor, single phase, 118c frame, original paint,1/2 hp, 17256 rpm, $135.00
91. Dayton excellent 3 phase 2 hp ODP, 145T frame, 1730 RPM Model 2N975, (7/8 shaft) 230./460 volts, $65.00
93. Rockwell, 1 hp, 1725 rpm, TEFC 3 phase, 143T frame, 7/8 shaft, used on some HD drill presses etc, #86-044, not repainted,
$50.00
94. Craftsman, late model, double shaft ½+5/8 3450, single phase, capacitor. Start, excellent thermal protection $35.00
95. Leeson 2hp 3phase TEFC, late model excellent 1725 56 frame $135.00
EXPLOSION PROOF MOTORS
1. General Electric ¼ hp single phase, excellent, runs quiet, 115/230 volts, 5/8 shaft, 56 frame, 1140 rpm, nice heavy duty motor,
$75 (could be used on a drill press).
10
2.
General Electric ½ hp single phase, excellent, runs well 1725 rpm, 56 frame, 5/8 shaft, nice heavy duty motor 115/230 volts,
$100.00
3. Baldor 3 phase 1 hp, 1140 rpm, 56 frame, 5/8 shaft, with heavy duty explosion proof conduit box, $100, excellent, runs well,
220/440 volts.
4. Leland ½ hp 1725 rpm 3 phase, nice motor, $125.00, 5/8 shaft 2C 56 frame
LARGE ELECTRIC MOTORS (all USA as always, unless listed otherwise
LM1.
Very nice westing house, very heavy duty single phase 1.5 hp 204 rare frame. (used on some old large South Bend
lathes) Dual voltage 115/230.
SMALL MOTORS
1. Baldor 1/12 hp DC, looks new. Boston Gear PM 908T-B item# 69825 90/115 DC amps.9-.7 1725/2200
3/8 shaft $25.00. Two for $40.00
2. Bodine 1/15hp 115 volts .75 amp DC, new, 6 pin lead. Type NSH-34 #278CF0163 $25.00 two for
$40.00
VINTAGE MOTORS, motors are run before they leave here
VMI. Delta Unisaw motor, original paint, excellent, made by AO Smith. 2 hp 3450 rpm, FITS in the old cabinets with the “oval
motor opening”, $150.00. Add $115.00 for new static converter to run on single phase 230 volts at about 70% rated hp. New
Delta pulley if needed, $42.00. Matched set of belts, $25.00
VM3. Unisaw 1 hp 3 phase 1725 rpm special motor, excellent $40. (pulleys are often available as an option), fits in old cabinets.
VM8. Very old Delta/Milwaukee 1/3 hp 3 phase 1725 double shaft with/cap., excellent ½” shafts, 66-110 #, $30.00
VM9. Delta, older, single phase scroll saw motor 1725 rpm, 1/3 hp, original paint double ½” shaft, excellent, motor plate came off,
$110.00
VM10. Delta, old HD, 1725, ½ hp, ¾ shafts w/cap., single phase. IR used on many old 17” drill presses etc., $160.00
VM11. Hoover, black, 1/3 hp, 114 2A frame, double 5/8 shaft, resilient mount, single phase, attached switch, pretty motor, $90.00
VM12. Delta 2 hp 1725 very nice ¾ shafts with cap. Original paint, 96-329 frame F66Y, $135.00 3phase
VM13. Delta 3 phase 1140 rpm 56Y frame, excellent, $45.00
VM14. Delta 3 phase Unisaw 2 hp motor, later style will not fit in old style cabinet, $65.00
VM16. Delta, single phase, IR, 181 frame, 1725 rpm, 1 hp, ¾” shafts with end cap. Pretty motor., $190.00
VM17. Delta 3 hp 3 phase Unisaw motor, $220.00
VM18. Atlas, black, 1/3 hp, single phase, 1725 rpm with separate switch, 116G Frame, (old style), nice, $90.00
VM19. Atlas ½ hp single phase 1725 rpm. Looks close to new, frame 118E, Cat. #2720, $200.00
VM20. Original Delta HD double ¾ shaft single phase 3450 rpm, capacitor start motor original grey and black colors, $225.00
(reasonable shipping).
VM21. Rockwell ½ hp single phase 56 frame TEFC, 1725 rpm original paint close to new condition, #62-227, $175.00, reversible
VM30. Delta/Westinghouse Large ½ hp capacitor start 1725rpm 2, ¾” shafts 186 frame top condition{quality. May fit many old 17”
Delta Drill presses. Bolt hole specs available on request $165.00
NEW BALDOR OLD STOCK MOTORS (oldstock-notcovered by Baldor) All stored in my heated buildings
1. M3535 1/3hp new in the box, 1200 rph 3 220/440 (list $544) your cost. $135 buy 2 they are $125
2. L3508T 3/4hp 143T frame single phase 1200 rpm, new in the box (list 893.00). Your cost $250.00
3. L3607. 1hp 184 frame single phase, new in the box, 1200 rpm (list price $1590.00) your cost $275.00
VARIABLE SPEED BELTS
1. Dayco 2322V601 Cog-belt, max width 1 7/16”, 60 ½ length, ½” thick, $20.00
ELECTRICAL WIRE
1. 14’ of soft extension cord SO wire, very heavy duty, $20.00 (ships easy in a flat rate box)
2. Very nice soft 8’ extension cord wire gage 8, 3 wire, $25.00
4. Piece of 12/4, $1.00 per foot, excellent.
5. Let me know your needs and approximate length, have some 10 and 14 gage as well.
6.
6 gage 4 wire soft extension cord copper wire, as new, type SOW, 16+ feet, sunlight and water resistant, $55.00
7.
12 gage 4 wire soft extension cord copper wire, as new type SOW, 9 feet, $15.00
8.
10 gage 4 wire, soft extension cord copper wire as new, about 35 feet, type SJEOW, $40.00
9.
Extension cord, 3 phase 4 wire 10 gage soft copper with male and female twist lock 20 amp 250 v 3 phase plugs. Type
STOW about 30 feet, like new, $45.00
10. About 30 feet 12/4 soft extension cord copper wire, type SO, as new, $45.00
11. Extension cord, heavy duty, excellent, 10/3 single phase with male & female 30 Amp twist lock plugs, (if you need details on
plug, let me know), $50.00
12. Soft HD Royal wire, 8 gage, 3 wire single phase, like new about 52 feet, $75.00
13. Nice piece of soft 10/4 type SO, 14 plus feet, $25.00 (with 20 amp, 250 volt male plug add $12.00), can ship in a flat rate box.
Wire pieces, all soft extension cord type
1.
7’, 12 x 24, $10.00
2.
14’, 14 x 4, $20.00
3.
10’, 12 x 5, $25.00
4.
10’, 10 x 4, $20.00
5.
4’, 14 x 4, $3.00
COMPRESSORS, new Saylor-Beall available at discount prices, free shipping on compressors.
4. Like new 60 gal tank, vertical 3 hp single phase with small USA made 2 cyl. Pump, with pressure switch, single stage,
$400.00
DUST COLLECTORS & BLOWERS
1. Cincinnati Fan single phase 1/3 hp fits on 20 1/4” diameter drum. (ie) many garbage cans. Looks new with bag, $175.00, for
nice cardboard drum with casters, add $25.00
3. Like new 2 hp, three phase for 55 gal. drum, $250.00.
11. Drum type, ½ hp single phase, American made for small drum, excellent w/bag, $200.00, 1/3 hp $135.00
12. New box of retanglular bags for Torrit/Donaldson #80 Cotton Sateen 30 PC dust collector brand new in original box, stored
in heated dry area (have 3 boxes), $50.00, 3 for $175.00, these are for the units used on grinders--fine metal dust, a very low
price, get a back up.
15. Delta/Cincinnatti Fan, late model, USA, goes on about a 20” drum, ½ hp, 115 volts, single phase with switch and collection
bag, $200.00 (Good for a small planer or other machine), excellent condition.
11
18. Dust collector, excellent, 1 hp, fits full size drum, single phase, very clean, with bag, $250.00
19. EG&G Rotron high pressure single phase blower, believe unused. Model DR 404 AL 58M, 52 suction, 57 pressure
continuous duty, made in Saugerties, NY, Serial #EE 34898, $150.00
DELTA NEW DUST COLLECTION ITEMS:
1. 50-196 Adapter, $15.00
PLANERS, American made
We sell new Northfield as well as used machines
1. For Powermatic 18" planer--knife grinding attachment parts, also some 20" parts, bars with carriage from $225.00.
2. Parks planer 12" for parts, state your needs have 2 parts machines, head, etc.
4. Index unit for Powermatic 20” planer includes notched ring and index (may also fit the 24”, we can check). Excellent, $165.00
5. Parks planer 12x4 very excellent machine. Basic machine without stand and motor, $850.00
6. Powermatic 16 inch, quickset bedrolls, 5hp single phase original motor. Along with regular knives, Esta German knife set up
original paint, beautiful machine. Top USA $2500.00 variable feed.
10. Powermatic sharpening attachment for 16" planer, excellent plus. Includes long bar, screw and carriage w/o grinder joining
attachment. $250.00, new joining attachment, $120.00,no motor grinder.
13. Powermatic sharpening bar w/brackets and carriage for 24" planer, excellent, $250.00.
21. Package of new German made Esta 24” Knives 12 count, $135.00 (Note: Esta special knife holders are required to use these
knives.
24. New dial indicator knife setting device for Powermatic 16/18 planer, could have other uses. Indicator is top quality, made in
Japan, $100.00, free shipping in the USA. Modest shipping Canada. (pic)
25. Powermatic 20” planer indexing unit, also includes 3 notch ring for cutter head shaft $155.00
26. #22-835 new in the box, belt & pulley guard for Delta 22-300 Uniplane, $65.00
27. Powermatic grinding bar, excellent with carriage for 16” USA planer, $250.00
28. Available soon, 12” USA Powermatic model 100 planer.
29. Powermatic, complete index unit for Model 100 12” planer, excellent, $125.00
30. Grinding attachment for USA Powermatic 100 12” planer, just the upper unit and bar that mounts on top of the planer,
excellent, used a few times, $350.00
31. Attachment that holds the honing stone, $130.00
32. Indexing unit for the 100 planer, $135.00
34. Parks 12” planer, excellent, table shows the original mill marks. Comes with original stand and belt guard. Original 3 phase
motor, $775.00 I have a single phase motor from a similar Parks planer, heavy duty, add $175.00 for that motor. Add $150.00
for installation.
35. Rockwell/Delta 13X6, excellent, with orig, 3hp single phase motor. Quality USA made tool. (Only USA small planer I know
of with variable feed. ) $1600.00 (pic)
POWERMATIC PLANERS
1. Knife grinder bar with moutning feet, Light use, excellent model 160, (16” planers). $250.00
PARKS 12” PLANERS AND PARTS
1. Original stand, excellent, $225.00
3. Set of cutter head gibs and screws, $80.00
4. Basic machine, no motor or base, excellent, $550.00
5. Top cast cover, $60.00
6. Serrated infeed roll, excellent, $70.00
7. Parks planer, with original stand, excellent single phase, $875.00
8. Excellent gear case. For twelve inch parks planer. $85.00
Have many parts such as: gibs, gears, chain, infeed roll, sprockets and many small parts. E-mail me a list.
PARKS 13” PLANER
1. Rare 13 x 5 Parks paner, 4 knife head sharp knives with a spare set. 2 infeed speeds, very light school use, excellent condition.
4 bed rolls. Much nicer than the standard 12” Parks, they sold for more than twice the price. With original base. Motor
options: 3 phase $1350.00, single phase, $1550.00
BANDSAWS
3. Delta 14" old style, beautiful saw, original open stand, single phase, $650.00, also cabinet stands, same price, restored.
12. We have some guard and tilt table parts for a 36” Northfield. Inquire with needs.
13 Delta original work light with hardware, excellent plus, $90.00
14. Keller hacksaw, original paint and stand, very pretty machine, small size, single phase, variable speed, $475.00
15. Delta 14” with open stand, rear drive, nice USA product, hardly used, single phase with 4 new blades, $500.00,(pic)
16. Delta fence for 20” bandsaw complete, excellent, $225.00
17. Powermatic 141 14” woodcutting bandsaw, original metallic green. Heavy duty top USA quality, $800.00, with single phase
motor, add $150.00
19. Powermatic 14” model 141 USA made, metallic green, excellent, Carter guides, 1 hp, single phase motor, $875.00
20. Original flip up caster set. Used on flared leg stand, center to center large hole in flared leg is about 17 1/8, excellent $80.00
Some components for the old Delta:
Cast iron Bandsaw base,part, parts only.
Motor base, LBS 229, $50.00
Corner brackets & cross pieces, $10.00 each, 4 for $30.00
BANDSAW PARTS AND ACCESSORIES
1. New 28-243 pulley+Delta guard, Delta, in original box $60.00
2. Gearing for metal saw, 14" Delta, inquire.
6. DELTA BANDSAW WHEEL COVER STEEL KNOB REPLACEMENTS—American made to exact old Delta knob
specs, $12.75 each, 4 for $39.00, shipping, $4.00 in the 48 states.
8. New in the package, set of cool blocks for 14” Delta/Rockwell bandsaw #28-266, 4 pcs., $15.00 postpaid. Pair of new thrust
bearings for same, add $10.00 postpaid, both for bearings and cool blocks for $25.00, postpaid.
9. Delta fence bolts for 14” bandsaw older style fence, $12.00, set of 4.
10. Beautiful pair of 14” cast iron bandsaw wheels for Kalamazoo, (pos. other uses), horizontal bandsaws. One drive wheel and
one idler, $50.00 for the pair. (nice for building your own saw).
14. Fence for Delta 20” Bandsaw, close to new condition, complete with rails and hardware, $225.00
15. Many other parts available, (i.e) covers etc. inquire, we are parting out a 14" W/M saw, upper cast arm, Delta.
16. Upper original wheel for 16” Walker Turner bandsaw, $120.00, excellent.
17. Powermatic fence for 20” bandsaw, excellent, $250.00
12
18. Caster set, flip lever type for old style 14” bandsaw open leg type, excellent, $80.00
19. Powermatic original upper and lower guide assembly, complete with square steel support. Excellent, $160.00
New Instock Band Saw Blades
1. Simonds 7-9 ½ (Delta) 3/16 4T skip $8.00--have 1
2. Milford 7'-5" ½ 14T wavy, $5.00--have 2
3. Simonds 7-9 ½ (Delta) 4T skip x ½", $8.00--have 6
4. Peerless 7-9 ½ (Delta) ¾ 5T, $8.00--have 1
5. New Lenox band saw blades, 12-4 ½ x ¾ 14T raker, .025 thickness, $12.00 each. Same but ½" $12 each, 6 or more, $10.00
each, (fit 20" Delta late model saw, check length), also other sizes, fax or mail needs.
6. Many blades for 14” Delta, all new, low prices, state needs.
BANDSAW BLADE WELDERS (single phase unless otherwise noted.
1. Stayco, commercial blade welder, made for commercial use. 1 type MF2, tested and adjusted. Serial # 5514. $600
2. Delta portable bandsaw blade welder 115 volts ½” capacity, excellent #28-463 USA quality, ships fedex ground, @250.00
WOOD LATHES
2. Atlas wood lathe xy compound, rare item, close to new, with tool post, holder, and cutting bit, $275.00 ($250 without post and
holder).
5. For old style HD Delta 12” wood lathe with cast iron legs:
Top cast cover, $45.00
Excellent bed, $50.00
6. Delta old wood lathe bed, excellent 48” with ½” slot metal fab. With original Delta Decal, “Double Duty Lathe”, $50.00, easy
ship (could possibly be used as a similar bed extension). Delta Home Craft.
8. Many other wood lathe accessories see that section.
9. Homecraft Delta 10X36 Castiron bed, best I can tell never used. Original paint, with 12” tool rest+base, centers, basic
machine, no motor, plus small face plate and 4 step spindle pulley: Also perfect indexer “art Deco” $250.00
10. Delta original, live center, morse two interchangeable tip, includes tailstock, cup center tip. Excellent bearings $50.00
ARBOR PRESSES, Intro: All arbor presses listed are made in the USA unless noted, all have a swivel plate unless noted.
Height is given with plate removed. All UPSable or FedEx Ground.
1. Dake #2 close to new condition, $145.00, H=7, D=4 5/8, no bottom swivel plate.
3. Grenard #1 H=4 7/16, D=2 ¾, excellent plus, $60.00
4. Dake #001, H=5, D= 3 ¼, excellent plus, $75.00
6. Grenard #2, H=8 1/8, D=5 1/8, very beautiful, $160.00 with ships wheel.
8. Grenard #2 H= 8 1/8, D=5 1/8, excellent, cleaned and painted, $115.00 no bottom swivel plate
10. Greenard #2, 8 high x 10” swing. As new original paint, with plate, $200.00
11. Panapress, USA, small, like new, 4 ¼ swing x 3 7/8 h, no plate, top quality, $30.00. Two for $50.00
12. Dake, small but heavy duty, as new, 4 ½ h x 7 swing, no plate, $85.00
ORIGINAL EXCELLENT USED PARTS FOR DELTA 8” HOMECRAFT TILTING ARBOR SAW:
1. Excellent cast iron top, $45.00
2. Fence with rails & hardware, $75.00
3. Saw sheet metal body, $20.00
4. Arbor bracket, $55.00
5. Hand wheel, $30.00
6. Motor bracket, $30.00
Other items, let me know.
PARTS AND ACCESSORIES, MOST IN STOCK AND 'UPS-ABLE" FOR JOINTERS, Discount prices
1. New set of 3 knives for Delta 6 x 42 or 6" short bed jointer, $30.00, for 8" old style jointer, $42.00, for 8" Powermatic, $42.00
2. Disposable Esta Knives made in Germany, literature available.
3. Fence for small Walker Turner 4" Driver line jointer, excellent with lock handle, $35.00
4. Delta/Rockwell 8” jointer cutter head, 3 knife, like new, with brgs and pillow blocks $110.00
5. Delta/Rockwell 8” jointer cutter head without gibs & knives, excellent, with bearings and bearing blocks, $150.00 with knives
& gibs, new or like new, $250.00
6. Delta/Rockwell 6” jointer cutter head, excellent, with gibs, $100.00, and new knives
7. Delta/Rockwell 4” jointer cutter head, excellent, with gibs, good bearings and bearing blocks, $60.00
8. New in the box 50-801 Delta 4” jointer dust chute, $30.00
DELTA/ROCKWELL TABLE SAW PARTS
1. Excellent top for 8” Homecraft TAB 101, $40.00, easy ship, tilting arbor.
2. Rear hinged motor mount for 8” Homecraft (tilting arbor), $30.00
3. Delta cast iron lower blade guard for 8” tilt table saw. “Delta Specialty Company, Milwaukee Wisconsin, etc.”, in raised
letters, $30.00
4. Front trunnion bracket TAB 102 for 8” Homecraft, excellent, $35.00 with shaft and worm, add $15.00
5. Arbor with bracket for 8” Homecraft, $65.00
6. Excellent long rail set for jet lock or similar fence, enable to cut 48”, excellent $100.00 packed carefully for fed ex ground
shipping, reasonable.
7. Parts for 8” tilt table saw:
Arbor $45.00
Fence only $45.00, insert $20.00 inquire for other parts.
DELTA 9”CONSTRACTORS SAW PARTS ALL EXCELLENT OR LIKE NEW
1. Arbor support bracket TAB-506, $45.00
2. Rear trunnion support 422-02-014-2003, $30.00
3. Front turnnion support, $35.00, worm and shaft, $25.00
4. Top TAB 101, $50.00
5. Large front piece with long worm gear, $65.00
6. Pointer to show blade tilt angle, $10.00
7. Front table with degree marks, $25.00
FOR TABLESAWS
1. New inserts for unisaws and contractor saw, regular, $30.00, molder head insert, $5.00, original.
3. Electric motors--see motor section
4. 52" Unifence, $300.00, used excellent,
13
8. Fence & rails for a General Tablesaw, like new or new, $85.00
9. We have some parts for the old style Powermatic tablesaw fences, using round bars, inquire, , rails, $50.00, nice heavy cast
iron fence, cast fence piece, $40.00, complete fence with rails, excellent, $75.00
13. New in the box Delta 34-828 splitter and blade guard, $75.00
18. Top for Unisaw--old style (not "T" slot), one rear fence tube bold hole is chipped, new nearby hole has been drilled. Would
not affect an after market fence, otherwise excellent, $50.00, similar chipped where wing goes, $50.00, ship UPS/Fed Ex
ground
21. Old Delta 10" tilt table saw, excellent, 20 x 27,no motor or stand, $90.00, with fence.
24. Top for 8" Delta Home Craft tilting arbor saw, old quality, excellent condition, $50.00
25. Metal casing for 8" delta Home Craft tilting arbor saw, excellent, original paint, $25.00 (ask about other parts).
30. Unisaw cabinet, original paint, 2 minor cuts, would be covered by a motor cover, $65.00 no bottom rim, with cast rim $90.00.
31. Older original style handwheel for Delta Unisaw, $50.00 2, for $90.00
32. We have some major castings for Unisaw, bearings, lock handles, many parts, etc, some major parts, new belts, bearings,
motor pulleys, etc.
33. Rear Trunion for old 10” tilt table saw, $25.00
38. Inca 10” table saw guard, like new, includes mounting piece, $70.00 Swiss made.
40. Biesmeyer blade guard, inquire for parts.
41. Fences, Jetlock brand new with rails, also includes 1 new cast iron wing 34-766, (wing fits Unisaws and old Delta HD shapers
as well as some 10” contractors saw 27” deep), $170.00. New fence and rails alone, $120.00, new cast iron wing alone, with
rounded edges $140.00
42. Craftsman miter gage, excellent condition and quality was on a 10”saw, $10.00
43. Boice Crane, original cast iron table saw extension 8 x 27 ½ easy to fed Ex ground, $85.00
45. Delta, mobile base extension, 50-285 new in the box, $50.00
46. Set of new Delta short rails as used on Unisaws and later 10” contractor saws, in original carton, $65.00
51. Cast iron top for 10” Delta tilt table saw 20 x 27 with 2, ¾ x 3/8 T slots, slight surface rust, $35.00 (easy ship Fed Ex ground).
54. Delta TAB 504 tablesaw trunion bracket with rack for small saw, (probably 8”), believe new, $45.00
55. Brett blade guard, $25.00
56. Front casting for Delta Unisaw style fence. Specify with rear lock, or jet lock, $10.00 each. (all parts, original, excellent with
no cracks or repairs).
57. Delta long tube rails for unisaw or similar Delta saw 1 3/8 diameter, will give 48 inch cutting capacity, exceptional condition,
$120.00
60. Bolt set with spacers for Delta 12/14 table saw includes 4 bolts, spacers and nuts, $35.00
61. Bolt set for Unisaw with spacers, $30.00
62. Bolt set for 9” contractors saw, $25.00 with spacers
65. Delta’s old ¾ bore sliding pulley used on some old saws, excellent, original, $85.00
For 0ld 10” tilt table saws—many parts
a. Insert good used, 12 x 3 ¾, $15.00
b. Top, excellent, $40.00 (could have other uses, has standard miter slots)
c Front trunion with worm gear, $75.00
d. Raising handle, $25.00
e. Set of rails, $40.00
Many other parts, inquire
For 9” Delta contractor’s saw, all original.
2. Blade guard, $65.00
3. Motor mount, $35.00
4. Motor belt guard, $25.00
5. Fence, rails and hardware, $85.00
6. Blade insert, $20.00
7. Skirt type stand, $60.00
9. Delta 9” contractors aw 2 piece hinged motor mount, excellent, $25.00.
10. Ask about other parts.
FOR BANDSAWS
1. Tires for 14", $19.00 each, other sizes available, top quality, consistent thickness for Delta, $18.00 for Powermatic
3. Carter ball bearing guides available.
5. Several new Delta cab. bases for 14" bandsaws, inquire, most cabinet style some with motor.
9. New 14" lighted blade guard, $35.00, used, $15.00
10. Rockwell bandsaw blade welder older portable unit, 230 volts single phase with grinder, made by Stycro, ½” capacity, 28464, Serial #1629B, 7 amps, directions included, $200.00
FOR WOOD LATHES
1. Tailstock for older Delta 11” wood lathe $85.00
2. Tool rest 46-590 4", $15.00, 12" 46-692, $30.00, Delta
9. Carriage, apron, and compound for Blount wood lathe, dimensions available, turns it into a pattern makers lathe, $200., like
new.
11. Tailstock for Delta 10" old style wood lathe #46-110, excellent, $80.00
13. Live center, original Delta with tips, believe new, $75.00,, interchangeable style
14. New American made 6" face plate, beautiful cast iron, ¾ x 16. Heavy enough hub to be bored out and tapped 1" something,
$15.00
18. Faceplate, 6” Delta, new ¾ x 12 thread, $35.00
19. Delta NEW old stock cast iron faceplate, 46-088 10” diameter, beautiful piece, also #425-99-072-0010, ¾ x 14 TPI, $30.00
20. Top Cast cover for 46-925 original like new, $65.00, one that was cast locally using an original as a pattern, a little rough
compared to the original, $40.00
21. Delta small 3” original faceplate, 1 x 8 thread, $20.00
22. Delta xy compound for 12” wood lathe excellent, original paint, could use a little cleaning, may not have been used, $250.00.
With tool post and holder, add, $40.00
23. Handwheel for old style 12 x 36 Delta wood lathe, controls speed, excellent, $25.00
24. Delta riser plate, to use Delta XY travel unit on 12” Lathe part # CBL-405 Like new $40.00
Special Pricing on new and used Powermatic wood lathe accessories and parts
4. 6" tool rest unused, $35.00
14
7. Faceplate for Powermatic 90, 6”, like new, $45.00, 4” $35.00
FOR SHAPERS
1. New router bit adapter for ¼ or ½ router bits, many in stock and discounted, specify Delta LD shaper, Delta HD shaper, or
Powermatic shaper, discounts on new Delta ones also, $125. New delta for the very late model, $125.00
3. Freeborn cutters, , some rail & style and panel cutters in stock. Free literature available.
10. New in the box Delta stub spindle for light duty shaper, #43-190 used for making sash, $50.00
11. New molder head insert, $25.00
POWERMATIC SHAPERS+PARTS
For model 26, excellent metallic green original paint:
1. Excellent top $140 (easy to ship fed ex ground)
2. Raising mechanism, excellent motor mount included $220.00
3. Original fence, excellent $140.00
4. Original extension wing $130.00 (also fits the 66 table saws)
5. . excellent cabinet $175.00 $175.00, bolts to a pallet, good shipping rates.
6. Large panel 19 1/2X 16 $85.00
7. End large 3 dimensional cover $85.00. note if someone wants the whole machine with out motor, pulleys, spindle. $400
what’s there is nice, metallic green with white stripe. (pending availability)
PARTS FOR DELTA 6 X 48 BELT AND 12” DISC SANDER
1. Steel platten, used, $25.00
2. 12” disc with hub, excellent, $100.00
3. 12” disc upper cast cover, excellent,$75.00
4. Excellent, original open stand for 12” disc sander, can take apart and box easily for FedEx ground, $85.00
5. Base and bottom shroud for 12” Delta disc sander, $65.00
FOR SANDERS
We sell top quality United Abrasives made in CT. Sheets 8 ½ x 11 open coat AL OX. Many variations, belts & discs available,
free quotes. New 6 x 120 belts, $4.00 each, 80 grit. Custom belts, 20 min. per grit. We have some new belts, state needs.
SANDING BELTS & SAND PAPER
1. New Norton edge sander belts, 4 x 132 150 grit, 6 for $25.00, cheap enough, perfect condition.
FOR PLANERS
1. For Delta planer—pulley for cutter head an old Delta 13 x 5 planer, excellent, $20.00
2. Parting out a 13 x 5 old planer, state needs--Delta.
2. Many new parts for 20" Powermatic grinding attachment, Powermatic rail and slide for 24" planer, excellent, $200.00
3. New in the box Delta 50-661 delux stand for 13” later style planer. This stand was over $400.0, has the table extensions,
$100.00. I have 2 left.
4. Indexer and indexing collar for Model 180 planer (may fit some others), excellent, $155.00
5. Delta new grinding wheel 22-813, $25 each.
6. Set of close to new HSS planer knives, top USA quality 16 x 1 ½ x .157.
7. Delta 13 x 5 very old planer set of 3 gibs with screws, $100.00, excellent.
8. New in the unopened box Rockwell pully for 13X6 planer 22-425 $75.00
ALBRECHT CHUCKS; MADE IN GERMANY
1. Beautiful 3/8 with Morse 3 shank, $125.00
2. Beautiful 5/16 with Morse 2 shank, $125.00
3. Beautiful ¼ with ½” straight shank, $125.00
VISES
1. Palmgren 4 ½ mill vise, close to new, angles and swivels, with stop, $250.00, nice USA quality
2. Drill press vise, like new 2 ½ with angle feature, no name through seems decent, $22.00 Made in Japan
BENCH VISES
1. Wilton, (best USA model), 3” with swivel base, excellent, $225.00
4. Made in Poland, 3 3/8” with swivel new or as new, $75.00
10. Heinrich air vise 4” very beautiful, $25.00 (same but custom Aluminum jaws) $30.00, for both.
PHASE CONVERTERS
1. Cedarberg Rotary converter, Like new 230 v mod. 50A will start a 5hp. All instructions. $425.00
3. New Static type Phasamatic, 1-3, $120, ¾-1 ½, $125.00 discounts on other sizes, inquire
5. Dealers for Steilman well made rotary converters, inquire for pricing and information
8. Arco very heavy, 5 horse power, excellent, $750.00
CASTER SETS—All have a 4 bolt flange mount unless noted. All USA unless noted. LN Stands for Like New, N Stands for
New. All swivel unless noted.
1. Set of 4 Faultless, swivel locking, close to new 3 ½” wheels, 400 lb cap/wheel, $45/set, USA shipping, $10.70
2. No name LN 4” est. cap. 150 lb/caster, $8.00 set.
3. Faultless 3” 3/8 threaded rod mount, est. cap, 150 lb/caster, $12.00/set
4. Lot of 3 Faultless 3 ½” non swivel, excellent plus, $10.00 for all.
5. Set of 4 USA, 4 x 1 5/8 wheels estimated load 500/caster. 3 Faultless, 1Bassick, all the same, $40.00
7. Set of 4 Faultless, all swivel, 4 x 1 ¼ wheels #400- 3 ½ believe 400 per caster, $25 per set, 2 sets, $45 (have 5 sets) shipping
in the USA, $10.95 (dusty).
8. Darnel, all swivel 3 ½ x 1 ¼, very beautiful well made set of 4, estimated cap. 400/wheel, $40.00 (for 6, $55.00)
9. Fautless, set of 4 model 3 ½ /400, 2 swivel with brake, 2 non- swivel, excellent, $20.00 for set
10. LPHD set of 4, as new, all swivel, low profile 4” wheel width is 1 ¾”, $35.00 for 4.
11. Nice set of 4 swivel with grease fittings 3” wheels, estimated load 200#/caster, $20.00
12. Steel 4 wheel caster cart for 55 gallon drum—nice for dust collector, $20.00
SPRAY EQUIPMENT
1. Binks exhaust fan for spraying model 30-610 very clean, excellent bearings, motor & base not included, 18” diameter, 6
blades, 11” deep, $150.00
CHAIN HOISTS AND TRUCK CRANES
1. A.T.I. USA 1 ton extendable truck crane, as new used twice, the professionally painted, better than original painting. Lifts
Bridgeports with ease. Model , $1325.00 (pic)
2. Budget 1 ton single phase electric chain hoist, like new, with brake (Don’t experiment with imports), $650.00
3. Many other similar lower priced 1 ton 3 phase chain hoists, good USA brands, inquire.
4. Ingersoll Rand, ¼ ton air hoist, very beautiful, $200.00
U
15
5. Budget ¼ ton, late style with pendant control. Single,,with brake, could use a cleaning, excellent, $150.00
6. Budget, like new, single phase, late model one ton with brake $575.00
7.
Coffing 2 ton trolley, like new (as always USA made unless listed otherwise), $150.00
8. Loadstar 2 ton trolley, excellent, $100.00
PORTABLE TOOLS
1. Excellent Black &Decker 1 ½ router with base, $60.00
PULLEYS
1. New in box Woods 3 groove 5 ½, ¾ bore, $15.00
TAP AND DIE
1. Excellent, USA made die wrenches for 1 ¾ dies, $10.00 each 3 for $25.00 to quality.
MISC.
4. New Delta raised panel cutters, carbide, old stock:
44-987 sq.nose for 5/8 material, $65.00
43-931 1 ¼ bore, $100.00
5. New drum switch, $50.00, up to 2 hp, forward off reverse, single phase
10. New Delta 6" jointer base only, cabinet style, $200.00, UPS or similar.
11. New Delta cabinet base 52-611 w/single phase motor and push button switch, $350.00, UPS or similar
12. New Delta cabinet base for 6 x 48 sander w/single phase motor and push button (needs cleaning from unboxed storage)
$300.00, can ship UPS or similar.
13. New Delta cabinet base 52-614 w/manual starter, $225.00, UPS or similar
14. New Delta cabinet base 52-096 for 6" jointer w/LVC magnetic control, $325.00 w/o mag. control, $250.00, UPS or similar
15. New Delta cabinet base 49-972 w/magnetic control w/guard, $375.00, w/o mag. control, $250.00, UPS or similar
16. New Delta cabinet base 49-889 for 6" jointer w/switch and original single phase motor, $350.00, UPS or similar
17 New Delta cabinet base for bandsaw w/original ½ hp single phase motor and magnetic control, $325.00
NOTE: Buy 2 bases and deduct 10%
19. 2 hp 3 phase Ace drum type collector, chip on outer apron, "cosmetic", otherwise excellent w/bag, $225.00
20. Unisaw or shaper handwheel as new, black, $45.00 (old style), chromed one, $50.00
36. Drum truck, excellent plus, 4 pneumatic tires, top quality, $45.00 beautiful
39. Radial arm saw blade leaf guard, Delta, new in box,33-449, $65.00
49. 36-624 Delta new table board was $51.93, now $19.75, 2 for $35.
50. 36-625 Delta new 52" Unifence extension table was $75.23, now $27.90 (2 for $50.)
55. Solder flux new brushes, handy for many things, 20 for $2.50, top American quality.
59. New in the box Craftsman/USA 8” valve spring compressing clamp “C” type, Cat #4695 (I believe), $30.00
60. Tap and die set. Little Giant #5 ½, made by Greenfield,. Top USA quality adjustable dies. HD set. N.C. ¼ x 20 to ¾ x 10
complete and excellent. With original 8 x 28 fitted wood case, $45.00
61. Original Powermatic doors, light green, approximately 17 ¾ x 19 3/8 high, with original hardware including cam & knob,
$50.00 each, (have 2).
63. Craftsman 3/8 drive air ratchet, like new, quality piece, made in Japan, heavy duty, $40.00
64. Campbell Hausfeld, ½” air wrench, looks decent, heavy duty, works well, made in Taiwan, close to new condition, $35.00
65. New Delta/Rockwell 6” pulley with 5/8 bore and special extend 2 3/4” hub, $10.00
66. Volcan HD eye hook, 2 ½ ID, 5 ¼ OD, 1 ½” threads, like new, $30.00
67. Small like new hydraulic pump 5/8 shaft B & S #2, $60.00. Brown & Sharp gear pump, #713-2-4 speed 300-900 Rpm.
68. Jacobs brand excellent large K5 chuck key, $12.00
70. New Delta large glass drip oilier, #24-906, $40.00
72. Jacobs/Portamatic USA keyless ½” with Morse 2, excellent, $75.00
MOBILE BASES
1.
Mobile base by HTC #HRS-10-66, excellent, $50.00
2.
HTC, HRS-10G for saw with long fence and legs. (if you need dimensions let us know). Excellent, $120.00
3.
RHS 10G by HTC, excellent plus for saw with extended fence, more details available if necessary, $100.00 (can box and
Ship Fed Ex ground).
4.
HTC excellent, accepts 20 ½ x 21, $130.00
NEW DELTA SHAPER CUTTERS, CARBIDE TIPPED, IN STOCK
1. Freud interchangeable knife cutterhead, #546 with 1 ½ straight knives, 1 ¼ bore, $30 bushed to 1", $40.00
ADDENDUM
4. New in the box for Delta Lumber Company Saw Mill, resaw attachment 36-366 for same, $20.00, new blade $10.00, 3 blades
for $25.00
6. New Delta 4 bolt flange, mount for 3 ½ " drill press column, $15.00, used $7.50
7. New Black & Decker radial arm saw 4 leg set, heavy duty, could have other uses, $25.00, R1102
9. New belt guard for 10" contractors saw, #34-965, $35.00 and for 34-400 saw or 10" bench saw part, #34/-941, $15.00
10. Guide shelf , new for 30" Unifence 34-914, $35.00
11. New Dewalt R9220 jointer fence in original carton, $40.00, collectors item, unboxed $30.00, new moulder head w/cutters &
guard, $60.00, nice old quality, green
12. New enclosed, old style stand for 14" band saw w/single phase motor, $275.00, #49-963, sheet metal
17. Dust chute, #37-602, $10.00, Delta
22. Delta 3 ½ bench model drill press column, $10.00 , floor column, $50.00
24. Parting out a 9" Delta contractors saw, top, wing, trunions, etc. or a whole machine to complete, also some 8” saws.
25. Mortising attachment for older Sears drill press, excellent, $35.00, spcify your quill size.
28. Original Delta dual contactor low voltage forward, reverse, and stop magnetic control w/remote station, excellent, $60.00
30. Allen Bradley remote station, $15.00, used, new $30.00. (a remote station turns on or off a magnetic conrol, a small 2 button
box)
Square "D" remote station, $15.00, used.
New Furnas remote station, $30.00
34. Top cover for Powermatic 15" drill press, 1150 VS, like new, metallic green, $50.00
35. Variable speed idler assembly for Delta HD wood lathe, $70.00
42. Complete yoke for Dewalt/Black & Decker 12" radial arm saw, included rail bearings, $80.00, the bearings would cost more.
43. Delta 12" radial arm saw motor w/yoke assembly, 3 phase, $125.00.
45. Tapmatic 30 x B on Rockwell pneumatic driver, $150.00
U
2B2B1B
16
46.
48.
49.
53.
Desouttier pneumatic drill unit, 500 rpm w/Jacobs ¼ chuck, mounting fixture model AFCM #912, like new, $100.00
Buck eye/Rockwell pneumatic drill fixture, w/.001 adjustment, model 21L 101 D, Ser #112056 w/ ¼ Jacobs chuck, $200.00
Aro pneumatic drill w/Jacobs ¼ chuck, mod. DL021B-15, $75.00
Delta 10" Contractors saw parts, w/o motor, motor mount, stand, miter, fence or guard. What there is, is excellent, $100.00,
good for spare parts.
54. Delta 34" x 2 ¾ drill press column, 4 bolt flange for table mounting, $15.00
59. Variable speed pulley 6" diameter spring loaded, excellent, 5/8 bore, make your own VS unit., $40.00
61. Delta stand, new in the box 50-508, $50.00, also 50-509, $50.00
62. We have some parts for a Boice Crane oscillating spindle sander, table, $60.00
66. Lassy--Top American quality lever acting vise, 5" width w/6" opening, minor marks, w/bolt down locations, low
profile, excellent for drill press, $35.00
70. New Powermatic table board in original carton for Accurite fence, $35.00, minor chip in corner, $20.00
MACHINE LIGHTS
1. Delta 882 original machine light with mounting hardware, chromed, $95.00. The same, but not chromed, $85.00
SUPER SPECIAL
Nice miter gauge for Fay & Eagen HD lighting series table saw, $30.00, other miters for large saws, inquire, or send "T" slot specs. .
SPECIAL SECTION ON ELECTRICAL SUPPLIES
1. New Furnas size 1 single phase magnetic control w/heaters for 3 hp (please specify), $140.00, 165.00 w/push button
kit, with NEMA 1 enclosure, many others available including 3 phase POR
3. Excellent name brand magnetic controls, Inquire.
7. New Baldor or Leeson ½ hp DC, 0-2500 rpm motor w/rectifier, $250.00, if in stock.
8. Used ½ hp, or similar size 3 phase motors, excellent, & priced to sell at about, $10.00
11. Like new three phase square "D" 440 volt size 2 magnetic control w/enclosure and push button, $100.00, small fraction of
new cost.
13. Male three phase plugs carefully state configurations, $15.00each, matching females if have, $25.00 each, pair $35.00.
14. Like new transformer 120 volt in 4-8-12-20-24 output 100 watt made by Edward w/enclosure, $10.00
15. High voltage ITT test meter, DC only--up to 42 K volts, believe new, w/case, $10.00, model 4242-A.
17. New in the box, Rockwell/Cutler Hammer overload switch #49-365, $7.50 each, 2 for $10.00
20. Like new dual voltage Furnas magnetic control, single phase, 230v up to 3 hp, 3 phase, up to 7 ½ hp, 220/440
coil, $50.00
23. Craftsman,1/2 hp, single phase 56 frame 3450 rpm 115/230 volt motor w/switch, ODP, w/double 5/8 shaft, $25.00
24. New in the box Cutler Hammer NEMA 1 Enclosure only for late style #3 starter, $20.00,inquire for dimensions.
25. Special manual push button motor starters, specify first and second choice: Allen Bradley, square D, Cutler Hammer
Furnas, GE, $20.00 each, two for $35.00, Don't use light switches for your machines.
26. Like new or new Baldor 90V DC ½ hp motor w/new or as new 40 to 1 right angle drive, $150.00 (rectifiers available, inquire)
We are master distributors for Baldor, Leeson motors. Many motors in stock and priced to sell.
We also recently purchased several new Delta cabinet machine stands many w/motors and controls, for band saws, jointers, etc.
Check for availability and pricing, if not shown (fax or e-mail us)
30. Inverter AC tech 3 phase, 200-240 input hp 2 KW 1.5, output 200-230, type 1 enclosure with display, H3 0-12- model M1220
B SN9487L6, $175.00
31. Minarix 1/8 hp shunt wound DC rectifier w/reverse and high low range. Needs cable fitting for output, $25.00, Model SL52
32. Staco reastat KVA .7, 5 amps, like new, $35.00
33. New Altivar (Square D), inverter, #18 1 hp max, 200/240 volt, w/readout, input single phase, 200-240v, output.5-320 Hz, 3
phase, 200-240v needs output wire. Inquire, Serial #8719190094, $175.00
34. Bodine DC rectifier w/torque control forward and reverse, like new, 1/15 hp, $40.00, missing two knobs, $50 with knobs.
35. Inverter 460 volt, 3 phase, XLT 3 polyspede model XLT3-51FG output 8.6 amp 1-230 Hz w/display, inquire, made by EXT in
Cortland, NY, $125.00
36. New Electrical box enclosures made by Hammond in Canada, 8 x 6 x 8, $10.00 each, 2 for for $15.00
38. Wire soft extension cord type, 10 gage 3 wire believe new, inquire with needs, good prices.
40. Rectifier, ¼-2hp, 115/230 volts made in USA by Reliance, with pot. Brand new in original carton, DC1-404 230v/180 out or
115/90 out. With book of instructions, $150.00
41. Square D breaker box with 30 Amp 3 phase breaker, excellent, clean, original paint, $30.00
43. Fused disconnect box, like new GE single phase with 20 Amp fuses, 3 hp cap., #S4371, $25.00
44. Excellent fused disconnect box w/10 Amp fuses, 3 phase, ITE brand. Cat. H F351, Amps 30, 3 phase, 480 volts, $20.00
45. 49-513 Delta new old stock grounded cord & plug, 14 gage, $10.00, very heavy duty, 115 volt plug.
46. Brand new in the box. 49-530 Delta control transformer 208/230/460 volt primary, 115 v secondary, $20, 3 for $50.00
47. Reostat “Powermatic” type SPN116B single phase. 0-140v out 120v in. 10 Amp KVA, 1.4 heavy duty, $35.00.
48. SPECIAL—New in the package. Delta Saf-Start plug, #49-350, 15 amp at 120 volts, $50.00, 3 for $140.00.
49. Breaker box 230 V single phase, close to new made by GE with 20 amp breaker, $40.00
50. Delta USA push button switch, large rectangular red and green buttons, like new, single phase double pole with box, $75.00
51. Transformer, like new, .075 KVA. General signal primary 240/480, secondary 120/240., $10.00 (have other similar
Ones, inquire)
52. Delta LVC magnetic control, single phase, $250.00
53. Cable suspenders, 10 assorted, $5.00
54. Have lots of soft wire, 3 plus 4 strand, 10, 12, and 14 gage, state length, gage and number of strands, good prices.
55. McGill 115 volt magnetic sensor 15 amp, used so if a machine is on when the power fails it will not come back on when the
power does. It needs to be reset first, excellent with plug, $40.00 (have more than one).
56. New in original box. Delta Manual Push Button switch. 34-882 (could be used for single phase). Includes box, wires cover
plate+switch. $85.00 Top USA quality.
57. Delta/Rockwell new in the box control transformers 208/220/440 Primary 115 secondary #49-530 $20.00
58. New in the box Delta/Rockwell powercord, 8; #49-357. $15.00.
59. New Cutler Hammer Size O 120V mag starter #A10 BNOA $90 (All USA)
60. New Cutler Hammer Heavy Duty Drum switch NEMAI single phase 230 V 3hp 5hp 3phase $90.00
61. Brand new in the orig. box cutler hammer overload switch Rockwell# 49-365 $40.00
ELECTRICAL SWITCHES AND CONTROLS
2ES. Furnas 2 speed, forward/reverse drum switch, $55.00
17
3ES. Furnas new in the box foot switch, very well made model X 153. 2 hp 110V ,3 hp 230, can be set to hold or momentary.
$55.00
2.
Original switch used on some Delta machines, single pole with hole for pull rod, excellent, $40.00
3.
Original Delta Unisaw toggle switch housing, excellent, $40.00 (housing only)
3 PHASE TRANSFORMERS
1.
Hevi-duty 6 KVA 480/208/120 cat #HT1F 6AS Type HT, excellent, enclosed, $200.00
SALE ON EXCELLENT USED MAGNETIC CONTROLS WITH NEMA 1 ENCLOSURES AND CLEAN
1. Furnas dual contactor 230 volt with forward/reverse/stop remote uses “H” type heaters, $25.00, order two or more, deduct
10%
2. S & S magnetic control with push buttons 230 volt, $35.00
3. GE dual contactor 230 volt, $20.00
4. GE 115 volt coil, contactor only, size 7 ½ hp at 230 volt, like new $35.00
6. Arrow Hart, new, dual contactor 24 v control coil, no heaters, 3 hp at 230 volt, 3 phase (2 hp at single phase), no heaters
included, $10.00
7. Arrow Hart, new, 230 volt control, no heaters, with manual/auto switch, $25.00
8. Furnas/South Bend dual contactor, with forward/reverse/stop remote, like new 3 hp cap at 230v 3 phase, (460 available)
present “H’ type heaters are for 7.35 amp. $60.00
9. Toshiba, made in Japan, nice with adjustable heaters to 9 amps, with nice square “D” remote 230 volt, $30.00
10. Siemans, made in Brazil, adj. heater up to 16 amp, excellent, clean, 230/460 coil, $30.00
11 Square D nice clean fuse box/disconnect, with 3 fuses, $15.00
12. Cutler Hammer, 3 hp at 115 v, 7 ½ at 230 volt dual contactor. Like new, no enclosure, $25.00
13. Allen Bradley, size 2, new in the box, perfect, 2 speed motor control, NEMA 1 enclosure for separate winding, double
contactor, $125.00 a very small fraction of the original cost.
14. Cutler Hammer, excellent 9 pole drum switch. Used on Bridgeports and many South Bend lathes, $70.00
15. Allen Bradley, contractor only, 110 volts, clean with original paint NEMA 1 enclosure, $35.00
16. Cutler hammer B series size 00 440v oil 3phase, excellent clean NEMA 1 encloser $15.00
SPECIAL 3 PHASE MOTOR SALE
1M. Baldor TEFC 56 Frame 220/440, 3450 rpm, 1hp, $25.00, excellent.
2M. Baldor ODP 1 ½ hp 143T frame 220/440 3450 rpm, beautiful motor, $35.00
3M. Large 15 hp late style with fins, $125.00
4M. Baldor 10 hp 3450 184T frame like new, $125.00
USED MOTOR AND GEAR MOTOR SPECIALS
1. Variable speed in line 3 phase 230 volt gear motor, ¾ hp, heavy duty TEFC, like new condition, made in Italy, $100.00
2. GE C face 56 C frame single phase 230 volt, O.D.P. late model capacitor start, $40.00 each, ½ hp 3450 rpm.
3. Dayton 3 phase, very late model 184 T frame, O.D.P., 230-460 volt, 1740 rpm. $80.00, 5 hp.
7. Delta 3 phase, 1 hp, 208 volt, dual shaft, 66 frame motor, like new, 1740 rpm, $25.00, ¾ shaft.
8. Nice GE 5 hp 3 phase 184 T TEFC 1725 rpm late style motor, $75.00
9. Excellent 185 frame 2 hp, 3 phase, $40.00
10. GE TEFC late model 1725 rpm, 3 phase, 184T frame,1 1/8 shaft, $80.00
11. Dayton TEFC 2 hp 3450 rpm 56 France, (5/8 shaft) USA quality, close to new, original paint single phase, 115/230v. $200
Delta 12" swing standard duty wood lathe parting out, cabinet, base, etc.
SPECIAL NEW IN THE BOX--New Baldor 115/230 TEFC 184 frame single phase, 1140 rpm, 1 hp (list over $800.) price, $225.00
CASTERS+DOLLIES
1. As new USA Furniture dollies. Est cap 800lb 18X30 $30.00 each, 2 for $50.00
PUMPS
TEEL heavy duty cast-iron, excellent +quiet with Dayton, TEFC, 566 frame with base 1/2hp. $175.00. Could be
used for coolant etc.
BORING MACHINES
Newton B-100 two adjustable spindles, with bits, excellent condition, custom wrenches. $475.00
FILES, WOODCISELS ETC.
12 assorted files, plenty of life, all have wood handles, can’t miss $15. USA shipping air $12.00.
PANAGRAPH MACHINES
1. Table model, top USA by Green, $150.00
Miscellaneous Delta items.
120714-805
14-817
14-833
14-843
15-010
15-809
17-635
28-266
34-569
34-812
34-950
36-624
36-625
4 speed pulleys for 24" scroll, 2 pulleys and V Belt
$75.00
Flat Belt , $20.00
4 step drill press pulley with belt for converting from low speed to high, $30.00
Flat belt for hi speed sensitive drill press $20.00
Jarvis tappinghead #0-#10
$175.00
Drill press collar (2 3/4"bore)
$15.00
Drill press table, titling 11 x 14 , 37lb, current list, $448.19, Price $250 plus $14 Fed Ex
Drill press collar for 17" DP (3 1/2 bore)
$20.00
Cool blocks for 14" Bandsaw, set
$15.00
Miter gage hold down clamp attachment, todays list, $68.14
$40.00
Rails only
$65.00
Arbor Extension, 1 1/4 x 2 for 12" T.A.S.
$150.00
Delta new table board for 30" Unifence, was $51.93, now
$19.75, 2 for $35.
Delta new 52" Unifence extension table, was $75.23, now
$27.90, 2 for $50.
18
36-864
41-713
46-085
46-093
46-934
46-940
49-120
50-209
50-234
Universal mounting base for mountinag 36-865 Versa feeder
4 step pulley, 5/8 bore
$45.00
Morse 1 live center
$35.00
Buffing wheel adapter for wood lathe
$15.00
8 1/2 sanding disc for wood lathe, list $92.91
$40.00
Screw center, list $43.75
$15.00
Variable speed belts
$55.00
Dust chute, kit list $90.30--price
$55.00
Dust collector connector for 43-370 HD shaper
$22.00
19
$45.00