Toshiba DVSe series Hybrid Video Recording Servers
Toshiba America Information Systems
9740 Irvine Blvd.
Irvine, CA 92618
877-855-1349
www.toshibasecurity.com
May, 2012
Product Guide Specification
Specifier Notes: This product guide specification is written according to the Construction
Specifications Institute (CSI) 3‐Part Format, based on Master Format 2004 and The
Project Resource Manual—CSI Manual of Practice. The Manufacturer is responsible for
technical accuracy. By removing the references to specific Toshiba product names or
part numbers, the text may be used also in performance‐based specifications.
The section must be carefully reviewed and edited by the Architect or Engineer to meet
the requirements of the project and local building code. Words and sentences within
brackets [ ] are choices to include or exclude a particular item or statement. Coordinate
this section with other specification sections and the Drawings.
Section 28 23 19
Digital Video Recorders and Analog Recording Devices
Part 1 – GENERAL
1.1
SUMMARY
A. Section Includes
1. Section 28 23 19 - Digital Video Recorders and Analog Recording Devices
B. Related Sections
1. Section 28 23 13 – Video Surveillance Control and Management Systems.
2. Section 28 23 16 – Video Surveillance Monitoring and Supervisory Interfaces.
3. Section 28 23 29 – Video Surveillance Remote Devices and Sensors.
1.2
REFERENCES
A. Federal Communication Commission (FCC) (www.fcc.gov)
1. FCC CFR 47 part 15 Class A – Telecommunications – Radio Frequency
Devices – Digital Emission
2. FCC CFR 47 part 15 Class B – Telecommunications – Radio Frequency
Devices – Digital Emission
B. International Electrotechnical Commission (IEC)
1. IEC 60529 Degrees of Protection provided by enclosures (IP code)
C. Underwriters Laboratories, Inc. (UL) (www.ul.com)
1. UL 2044 Commercial Closed-Circuit Television Equipment
Project Name/Project Number
28 23 19
Digital Video Recorders and
Analog Recording Devices
Toshiba DVSe series Hybrid Video Recording Servers
D. Institute of Electrical and Electronics Engineers, Inc. (IEEE) (www.ieee.org)
1. IEEE 802.3af Power Over Ethernet
E. Industry Canada (ICES) (www.ic.gc.ca)
1. ICES-003 Digital Apparatus – Spectrum Management and
Telecommunications Policy Interference Causing Equipment Standard
F. Canadian Standards Association (CSA) (www.csa.ca)
1. CSA C22.2 NO. 60950-1 Information Technology Equipment – Safety – Part
1: General Requirements
1.3
SYSTEM DESCRIPTION
A. Digital Video Recorders and Analog Recording Devices
1. Hybrid Video Recording Server
B. Performance Requirements
1. Provide hybrid video recording capabilities
2. Possess advanced features.
3. The server shall be of the manufacturer’s official product line, designed for
commercial/industrial continuous 24/7 use.
4. The server shall be based upon standard components and proven
technology.
1.4
SUBMITTALS
A. Submit under provisions of Section [01 33 00].
B. Product Data:
1. Manufacturer’s data, user and installation manuals for all equipment and
software programs including computer equipment and other equipment
required for a complete video system.
C. Shop Drawings
1. System device locations on architectural floor plans.
2. Full Schematic of system including wiring information for all devices.
D. Closeout Submittals
1. User manuals.
2. Parts list.
3. System device locations on architectural floor plans.
4. Wiring and connection diagrams.
5. Maintenance requirements.
1.5
QUALITY ASSURANCE
A. Manufacturer:
1. Minimum of 10 years experience in the manufacture and design of Video
Surveillance Devices.
B. Installer:
Project Name/Project Number
28 23 19
Digital Video Recorders and
Analog Recording Devices
Toshiba DVSe series Hybrid Video Recording Servers
1. Minimum of 5 years experience installing Video Surveillance Devices.
2. All installation, configuration, setup, program and related work shall be
performed by electronic technicians thoroughly trained by the manufacturer in
the installation and service of the equipment provided.
C. System Requirements:
1. Listed by UL specifically for the required loads.
2. Listed by IC specifically for the required loads.
3. Listed by FCC specifically for the required loads.
4. Listed by CSA specifically for the required loads.
5. Listed by RoHS specifically for the electronic assembly.
1.6
DELIVERY, STORAGE AND HANDLING
A. Comply with requirements of Section [01 60 00]
B. Deliver materials in manufacturer’s original, unopened, undamaged containers;
and unharmed original identification labels.
C. Protect stored materials from environmental and temperature conditions following
the manufacturer’s instructions.
D. Handle and operate products and systems according to manufacturer’s
instructions.
1.7
PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within
limits recommended by manufacturer for optimum results. Do not install products
under environmental conditions outside manufacturer's absolute limits.
1.8
MAINTENANCE
A. Maker ordering of new equipment for expansions, replacements and spare parts
available.
B. Provide factory direct technical support to the installing firm.
1.9
WARRANTY
A. Provide manufacturer’s warranty covering three (3) years for replacement and
repair of defective equipment with one (1) year advance replacement.
Part 2 – PRODUCTS
2.1
MANUFACTURER
A. Acceptable Manufacturer
Toshiba America Information Systems
9740 Irvine Blvd.
Irvine, CA 92618
Project Name/Project Number
28 23 19
Digital Video Recorders and
Analog Recording Devices
Toshiba DVSe series Hybrid Video Recording Servers
877-855-1349
www.toshibasecurity.com
B. Substitutions: Under the provisions of Division 1:
1. All proposed substitutions must be approved by the Consultant or
Architect/Engineer professional.
2. Proposed substitutions must provide a line-by-line compliance document.
2.2
Hybrid Video Recording Server
A. General Characteristics:
1. Provide high quality recording of IP cameras and analog cameras.
2. Capable of storage and playback of images from 1 to 32 analog camera
inputs and up to 64 IP camera inputs.
3. Simultaneous recording, search and playback and archiving.
4. Support for H.264, MPEG4, and MJPEG compressions.
5. Provide remote software accessibility via video management software.
6. DVD-RW for video export and archiving.
7. Removable hard disk drives.
8. Dual DVI and HDMI video outputs
9. Ability to add IP camera licenses beyond number of analog channels.
10. Audio recording capability
11. Video signal loss detection
12. Cloud based remote recorder health monitoring.
B. Server shall have the following hardware features:
1. 4U rack mountable chassis size
2. 8, 16 or 32 looping analog video inputs
3. 240 fps video capture (240 models) for analog cameras
4. 480 fps video capture (480 models) for analog cameras
5. 480 fps live viewing rate for analog cameras
6. 240 fps live viewing rate for analog cameras (240V models)
7. Maximum 720x480 recording resolution for analog cameras
8. Maximum 640x480 recording resolution for analog cameras (240V models)
9. Intel G840 2.8GHz CPU (240 models), upgradeable to Intel Core i7 CPU
10. Intel Core i3 3.3GHz CPU (480 models), upgradeable to Intel Core i7
11. 2GB RAM memory, upgradeable to 4GB
12. 1 x DVI video output
13. 1 x HDMI video output
14. 4 removable hard disk drive capacity
15. 8 sensor inputs (8 channel models)
16. 16 sensor inputs (16 and 32 channel models)
17. 8 relay outputs (8 channel models)
18. 16 relay outputs (16 channel models)
19. 8 audio inputs (8 channel models)
20. 16 audio inputs (16 and 32 channel models)
21. DVD RW
22. 2 x USB 3.0 ports, 6 x USB 2.0 ports
23. RS-422/485 connection for analog PTZ cameras
24. 1 x eSATA port
25. 10/100/1000 Mbps Gigabit Ethernet connection
Project Name/Project Number
28 23 19
Digital Video Recorders and
Analog Recording Devices
Toshiba DVSe series Hybrid Video Recording Servers
26. Redundant power supply option
27. RAID5 capability
C. Server shall have the following software features
1. Windows 7 embedded operating system
2. Active Directory support
3. H.264, MPEG4 and MJPEG compression
4. Simultaneous record, view, search and archive
5. Individual camera settings for recording schedule and frame rate
6. Instant rewind search
7. Preview search
8. Status search
9. Bookmark search
10. Object search
11. Digital zoom in playback
12. Backup in proprietary format
13. Digital signature verification
14. Export in AVI and JPG formats
15. Multi-level user access and login
16. Included VMS software
17. No expiration for IP camera licenses
18. Free compatible software upgrades for entire life of the server
D. Server shall have the following network features
1. Protocols supported include TCP/IP, HTTP, HTTPs, UPnP, SMTP, DHCP,
NTP, DNS, DDNS, PPPoE, SNMP and 802.1X
2. ONVIF 1.02 compatible
3. Internet protocols supported include IPv4 and IPv6.
4. Support for up to 10 simultaneous remote administrators.
5. Bandwidth control services
E. Safety and Radio compliances
1. FCC/A
2. IC (ICES-003)
3. UL60950-1
4. CSA C22.2 No. 60950-1
5. FCC/B
6. RoHS compliance per Toshiba guideline
F. Mechanical
1. Weight: 46-51 lbs
2. Dimensions (LxWxH): 21.5”(54.61 cm) x 17.25”(43.815 cm) x 7”(17.78 cm)
G. Electrical
1. Server input voltage/power requirements: 90~265VAC
2. Power consumption: 400W max
H. Environmental
1. Operating Temperature: 32°F to 122°F (0°C to 50°C
2. Operating Humidity: 5 to 90% relative humidity.
Project Name/Project Number
28 23 19
Digital Video Recorders and
Analog Recording Devices
Toshiba DVSe series Hybrid Video Recording Servers
Part 3 – EXECUTION
3.1
EXAMINATION
A. Examine areas to receive devices and notify adverse conditions affecting
installation or subsequent operation.
B. Do not begin installation until unacceptable conditions are corrected.
3.2
PREPARATION
A. Protect devices from damage during construction.
3.3
INSTALLATION
A. Install devices in accordance with manufacturer’s instruction at locations
indicated on the floor drawings plans.
B. Perform installation with qualified service personnel.
C. Install devices in accordance with the National Electrical Code or applicable local
codes.
D. Ensure selected location is secure and offers protection from accidental damage.
E. Location must provide reasonable temperature and humidity conditions, free from
sources of electrical and electromagnetic interference.
3.4
FIELD QUALITY CONTROL
A. Test snugness of mounting screws of all installed equipment.
B. Test proper operation of all video system devices.
C. Determine and report all problems to the manufacturer’s customer service
department.
3.5
ADJUSTING
A. Make proper adjustment to video system devices for correct operation in
accordance with manufacturer’s instructions.
B. Make any adjustment of server settings to comply with specific customer’s need.
3.6
DEMONSTRATION
A. Demonstrate at final inspection that video management system used with
devices functions properly.
END OF SECTION
Project Name/Project Number
28 23 19
Digital Video Recorders and
Analog Recording Devices