Blade Info
Index










show config blade
show blade
show blade IOx
show blade CPUx
show blade PSx
show blade FANx
show blade MP
show env
show leds
show media
1 BladeInfo | QLogic Corporation
Blade Info
show config blade - This command displays the IO blade attributes for the current configuration.
If BLADE is
specified and it represents a valid IO blade, then only the configuration for that blade will be displayed; otherwise, all
information for all IO blades will be displayed.
Usage: show config blade [BLADE]
[BLADE] may be one of:
IO0
IO slot 0
IO1
IO slot 1
IO2
IO slot 2
IO3
IO slot 3
IO4
IO slot 4
IO5
IO slot 5
IO6
IO slot 6
IO7
IO slot 7
CPU0
CPU slot 0
CPU1
CPU slot 1
Example:
SANbox-top207 #> show config blade
Configuration Name: default
------------------Blade
ID
----IO0
IO1
IO2
IO3
IO4
IO5
IO6
IO7
CPU0
CPU1
Blade
Type
----FC4G16
FC4G16
Auto
Auto
Auto
Auto
Auto
Auto
N/A
N/A
Admin
State
----Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
SANbox-top207 #> show config blade io6
Configuration Name: default
------------------Blade IO6:
---------BladeType
AdminState
Auto
Online
For IO blades the BladeType can currently be configured as:
FC4G16 - 16-port 4Gig IO Blade
FC10G4 - 4-port 10Gig IO Blade
Auto - Chassis auto-senses blade type when insertedand the Admin State configured as:
Online - fully operational
Offline - not available
Diag - available to run diagnostics
Down - available, but not operational
PwrdOff - Available for hotswap
The CPU blades do not have "PwrdOff" as an Admin State choice.
Troubleshooting: Blades configured as "Auto" and any of the ports on that blade cannot be cloned. Additionally, no ports
can be configured on a blade configured as "Auto". If a port configuration is attempted on a blade configured as "Auto",
the following message will appear:
SANbox-top207 (admin-config) #> set config port 18
Index
2 BladeInfo | QLogic Corporation
Blade Info
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Configuring Port Number: 18
-----------------------Cannot modify port configuration for ports on blades configured as type 'Auto'.
Use the 'set config blade IO1' command to change the configured blade type.
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config activate command) before it can take effect.
To discard this configuration use the config cancel command.
Additionally, any port configurations on a blade configured as FC4G16 or FC10G4 will revert to default settings if the
blade configuration is changed to "Auto".
show blade – This command displays the blade operational attributes. If BLADE is not specified, it displays summary
information for all blades in the system. Optional keywords may be used to request a variety of summary information,
otherwise, detailed information is displayed for the specified blade.
Usage:
show blade <BLADE> [ aux | env | leds | media | ports | temp | voltage ]
<BLADE> may be one of:
IO0
IO slot 0
IO1
IO slot 1
IO2
IO slot 2
IO3
IO slot 3
IO4
IO slot 4
IO5
IO slot 5
IO6
IO slot 6
IO7
IO slot 7
CPU0
CPU slot 0
CPU1
CPU slot 1
PS0
Power Supply slot 0
PS1
Power Supply slot 1
FAN0
Fan slot 0
FAN1
Fan slot 1
MP
Maintenance Panel
Example:
SANbox-top207 #> show blade
Blade
ID
----IO0
IO1
IO2
IO3
IO4
IO5
IO6
IO7
Blade
Type
----FC4G16
FC4G16
*
*
*
*
*
*
Port
Range
----0-15
16-31
*
*
*
*
*
*
Admin
State
----Online
Online
Online
Online
Online
Online
Online
Online
Oper
State
----Online
Online
NotInst
NotInst
NotInst
NotInst
NotInst
NotInst
Fault
Status
-----None
None
*
*
*
*
*
*
Index
3 BladeInfo | QLogic Corporation
Temp
Status
-----Normal
Normal
*
*
*
*
*
*
Voltage
Status
-----Good
Good
*
*
*
*
*
*
Blade Info
+CPU0
CPU1
PS0
PS1
FAN0
FAN1
MP
CPU
CPU
PSBF
PSBF
FANBF
FANBF
MP
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Online
Online
N/A
N/A
N/A
N/A
N/A
Online
Online
N/A
N/A
N/A
N/A
N/A
None
None
None
None
None
None
None
Normal
Normal
N/A
N/A
N/A
N/A
N/A
Good
Good
N/A
N/A
N/A
N/A
N/A
"+" indicates primary CPU
The "show blade" command with no options will report the current status of installed blades. Contrast this with the "show
config blade" which reports the configuration of the blade slots, not the actual blades. In other words, slot IO2 can be
configured as FC4G16, but the list above would still report the slot as uninstalled if no blade is present in the slot.
Troubleshooting: Fault Status, Temp Status and Voltage Status will provide indications of hardware problems. If a
customer indicates that a blade is installed in a slot reported as "NotInst", check to see that the blade is fully latched into
the slot.
show blade ioX – This command displays the operational attributes of a specific IO blade. Optional keywords may be
used to request a variety of summary information.
Usage:
show blade <ioX> [ aux | env | leds | media | ports | temp | voltage ]
Example:
Installed Blade
SANbox-top207 #> show blade io1
Configured Blade Type
Current Blade Type
ASIC Count
Ports Per ASIC
Port Range
Aux Range
Configured Admin State
Current Admin State
Oper State
Presence Indicator
Beacon
Logging
Serial Number
Planar Part Number
Boot Version
Boot Version Code
Boot Timestamp
Diag Fault Code
Diag Status
Test Fault Code
Test Status
Temp Status
Voltage Status
Reset Reason
Fault Status
Current Faults
Empty Slot
SANbox-top207 #> show blade io2
FC4G16
FC4G16
1
20
16-31
4-7
Online
Online
Online
FullySeated
Off
On
0637A00284
31477-09 A
V1.12.4.13.0
010c040d
Tue Nov 7 14:09:55 2006
00000000
Passed
00000000
NeverRun
Normal
Good
PowerUp
None
None
Configured Blade Type
Current Blade Type
ASIC Count
Ports Per ASIC
Port Range
Aux Range
Configured Admin State
Current Admin State
Oper State
Presence Indicator
Beacon
Logging
Serial Number
Planar Part Number
Boot Version
Boot Version Code
Boot Timestamp
Diag Fault Code
Diag Status
Test Fault Code
Test Status
Temp Status
Voltage Status
Reset Reason
Fault Status
Current Faults
Auto
Unknown
0
0
Unknown
Unknown
Online
Online
NotInstalled
NotInstalled
Off
On
NotInstalled
NotInstalled
NotInstalled
00000000
NotInstalled
00000000
NotInstalled
00000000
NeverRun
Unknown
Unknown
Unknown
Unknown
Unknown
The "show blade ioX" command reports full details of the blade status including configured and operational states as well
as manufacturing and diagnostics information. Running the command on an empty slot will show configuration
information for the slot only.
Index
4 BladeInfo | QLogic Corporation
Blade Info
show blade ioX aux - This command displays the operational attributes for the specified blade's aux ports. This
command output is included with "show support" but is otherwise only available with "set debug on" as a CLI command.
SANbox-top207
Aux Blade
Num ID
--- ----0
IO0
1
IO0
2
IO0
3
IO0
#> show blade io0 aux
Operational Link
State
State
----------- ----Online
Active
Online
Active
Online
Active
Online
Active
Linked
Aux Port
-------48
56
32
40
Troubleshooting: The operational and link states indicate the bandwidth capability to other IO blades. If any ports are
offline or inactive, there is the potential of performance issues between blades. Check the corresponding aux ports on the
CPU blades. Failures could indicate problems with either the IO blade or the CPU blade.
show blade ioX env - This command displays information about the temperature and voltage sensors on the specified
blade.
SANbox-top207 #> show blade io0 env
Temperature(C) Sensors:
Blade ID Sensor Description
-------- ------ ----------IO0
0 BOARD
IO0
1 DS1780
IO0
2 MAX1617
IO0
3 ASIC
Voltage Sensors:
Blade ID Sensor
-------- -----IO0
0
IO0
1
IO0
2
IO0
3
IO0
4
Description
----------1.5V
1.25V
2.5V
3.3V
12V
Status
-----Normal
Normal
Normal
Normal
Current
------37
27
38
52
High Warn
--------75
65
75
110
High Alarm
---------85
70
90
120
Status
-----Good
Good
Good
Good
Good
Current
------1.48
1.24
2.49
3.31
12.19
Low Alarm
--------1.31
1.00
2.20
2.99
10.69
High Alarm
---------1.68
1.50
2.82
3.62
13.31
Troubleshooting: Status indications other than normal or good indicate a potential cooling or power problem depending on
the specific sensors.
show blade ioX leds - This command displays the led status on the specified blade. This command output is included
with "show support" but is otherwise only available with "set debug on" as a CLI command.
SANbox-top207 #> show blade io0 leds
LEDs on IO0:
ModuleGood
On
Fault
Off
Beacon
Off
PowerGood
On
Heartbeat
Off
Removable
Off
Troubleshooting: This information is useful when the switch is at a remote site.
show blade ioX media - This command displays information about media devices such as SFP, and XPAK. These
devices provide high/low alarm and high/low warning thresholds. The measured values can be compared with the
thresholds to determine when a particular value exceeds normal operating limits as determined by the manufacturer. This
command is only available with the SANdoctor license.
Index
5 BladeInfo | QLogic Corporation
Blade Info
SANbox #> show blade io0 media
Note:
Port
Num
---0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
-- LowAlarm; - LowWarning; + HighWarning; ++ HighAlarm
Blade ID
-Port
-------IO0-0
IO0-1
IO0-2
IO0-3
IO0-4
IO0-5
IO0-6
IO0-7
IO0-8
IO0-9
IO0-10
IO0-11
IO0-12
IO0-13
IO0-14
IO0-15
Vendor Name
----------PICOLIGHT
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
FINISAR CORP.
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
Temp
(C)
------35.77
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Voltage
(V)
------3.32
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Tx Bias
(mA)
------4.88
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Tx Pwr
(mW)
-----0.382
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Rx Pwr
(mW)
-----0.480
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
show blade ioX ports - displays the operational attributes for the specified blade's user ports.
SANbox-top207 #> show blade io0 ports
Port
Num
---0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Blade ID
-Port
-------IO0-0
IO0-1
IO0-2
IO0-3
IO0-4
IO0-5
IO0-6
IO0-7
IO0-8
IO0-9
IO0-10
IO0-11
IO0-12
IO0-13
IO0-14
IO0-15
Admin
State
----Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Oper
State
----Offline
Offline
Offline
Offline
Offline
Offline
Offline
Offline
Online
Offline
Offline
Offline
Offline
Offline
Offline
Offline
Login
Status
-----NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
LoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
NotLoggedIn
Config
Type
-----GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
Running
Type
------Unknown
Unknown
Unknown
Unknown
Unknown
Unknown
Unknown
Unknown
F
Unknown
Unknown
Unknown
Unknown
Unknown
Unknown
Unknown
Link
State
----Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Active
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
Link
Speed
----Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
2Gb/s
Auto
Auto
Auto
Auto
Auto
Auto
Auto
show blade ioX temp - This command displays information about the temperature sensors on the specified blade (see
also show blade ioX env).
SANbox-top207 #> show blade io0 temp
Temperature(C) Sensors:
Blade ID
-------IO0
IO0
IO0
IO0
Sensor
-----0
1
2
3
Description
----------BOARD
DS1780
MAX1617
ASIC
Status
-----Normal
Normal
Normal
Normal
Current
------37
27
38
52
High Warn
--------75
65
75
110
Index
6 BladeInfo | QLogic Corporation
High Alarm
---------85
70
90
120
Blade Info
show blade ioX voltage - This command displays information about the voltage sensors on the specified blade (see
also show blade ioX env).
SANbox-top207 #> show blade io0 voltage
Voltage Sensors:
Blade ID Sensor
-------- -----IO0
0
IO0
1
IO0
2
IO0
3
IO0
4
Description
----------1.5V
1.25V
2.5V
3.3V
12V
Status
-----Good
Good
Good
Good
Good
Current
------1.48
1.24
2.49
3.31
12.19
Low Alarm
--------1.31
1.00
2.20
2.99
10.69
High Alarm
---------1.68
1.50
2.82
3.62
13.31
show blade cpuX – This command displays the operational attributes of a specific CPU blade. Optional keywords may
be used to request a variety of summary information.
Usage:
show blade <cpuX> [ aux | env | leds | ports | temp | voltage ]
Example:
SANbox-top207 #> show blade cpu0
Current Blade Type
CPU
ASIC Count
2
Ports Per ASIC
16
Port Range
128-143
Hyperstack ports
Aux Range
32-47
Backplane ports
Configured Admin State
Online
Current Admin State
Online
Oper State
Online
Latch Status
Closed
Presence Indicator
FullySeated
Beacon
Off
Logging
On
Serial Number
0637A00219
Planar Part Number
31485-08 A
Boot Version
V1.12.4.13.0
Boot Version Code
010c040d
Boot Timestamp
Tue Nov 7 14:10:34 2006
Diag Fault Code
00000000
Diag Status
Passed
Test Fault Code
00000000
Test Status
NeverRun
Temp Status
Normal
Voltage Status
Good
Reset Reason
HardReset
Fault Status
None
Current Faults
None
show blade cpuX aux - This command displays the operational attributes for the specified blade's aux ports. This
command output is included with "show support" but is otherwise only available with "set debug on" as a CLI command.
SANbox-top207
Aux Blade
Num ID
--- ----32
CPU0
33
CPU0
34
CPU0
35
CPU0
#> show blade cpu0 aux
Operational Link
State
State
----------- ----Online
Active
Online
Active
Offline
Inactive
Offline
Inactive
Linked
Aux Port
-------2
6
10
14
Index
7 BladeInfo | QLogic Corporation
Blade Info
36
37
38
39
40
41
42
43
44
45
46
47
CPU0
CPU0
CPU0
CPU0
CPU0
CPU0
CPU0
CPU0
CPU0
CPU0
CPU0
CPU0
Offline
Offline
Offline
Offline
Online
Online
Offline
Offline
Offline
Offline
Offline
Offline
Inactive
Inactive
Inactive
Inactive
Active
Active
Inactive
Inactive
Inactive
Inactive
Inactive
Inactive
18
22
26
30
3
7
11
15
19
23
27
31
Troubleshooting: The operational and link states indicate the bandwidth capability to other IO blades. If any ports are
offline or inactive, there is the potential of performance issues between blades. Check the corresponding aux ports on the
IO blades. Failures could indicate problems with either the IO blade or the CPU blade.
show blade cpuX env - This command displays information about the temperature and voltage sensors on the
specified blade.
SANbox-top207 #> show blade cpu0 env
Temperature(C) Sensors:
Blade ID Sensor Description
-------- ------ ----------CPU0
0 BOARD
CPU0
1 DS1780_0
CPU0
2 DS1780_1
CPU0
3 MAX1617_0
CPU0
4 ASIC_0
CPU0
5 MAX1617_1
CPU0
6 ASIC_1
Status
-----Normal
Normal
Normal
Normal
Normal
Normal
Normal
Current
------24
24
25
27
50
27
55
High Warn
--------75
65
65
75
110
75
110
High Alarm
---------85
70
70
90
120
90
120
Voltage Sensors:
Blade ID Sensor
-------- -----CPU0
0
CPU0
1
CPU0
2
CPU0
3
CPU0
4
CPU0
5
CPU0
6
CPU0
7
CPU0
8
Status
-----Good
Good
Good
Good
Good
Good
Good
Good
Good
Current
------1.54
1.24
1.79
3.31
12.06
1.47
2.49
1.47
3.32
Low Alarm
--------1.42
1.00
1.60
2.99
10.69
1.31
2.21
1.31
3.02
High Alarm
---------1.68
1.50
1.99
3.62
13.31
1.68
2.80
1.68
3.58
Description
----------1.55V
1.25V
1.8V
3.3V
12V
ASIC_0_1.5V
2.5V
ASIC_1_1.5V
3.3V
Troubleshooting: Status indications other than normal or good indicate a potential cooling or power problem depending on
the specific sensors.
Index
8 BladeInfo | QLogic Corporation
Blade Info
show blade cpuX leds - This command displays the led status on the specified blade. This command output is
included with "show support" but is otherwise only available with "set debug on" as a CLI command.
SANbox-top207 #> show blade cpu0 leds
SANbox-top207 #> show blade cpu1 leds
LEDs on CPU0:
LEDs on CPU1:
ModuleGood
Fault
Primary
Beacon
PowerGood
Heartbeat
Spare
Removable
On
Off
On
Off
On
Blink
Off
Off
ModuleGood
Fault
Primary
Beacon
PowerGood
Heartbeat
Spare
Removable
On
Off
Off
Off
On
Blink
Off
Off
Troubleshooting: This information is useful when the switch is at a remote site.
show blade cpuX ports - displays the operational attributes for the specified blade's hyperstack ports.
SANbox-top207 #> show blade cpu0 ports
Port
Num
---128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
Blade ID
-Port
-------CPU0-0
CPU0-1
CPU0-2
CPU0-3
CPU0-4
CPU0-5
CPU0-6
CPU0-7
CPU0-8
CPU0-9
CPU0-10
CPU0-11
CPU0-12
CPU0-13
CPU0-14
CPU0-15
Admin
State
----Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Oper
State
----Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Login
Status
-----LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
LoggedIn
Config
Type
-----GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
GL
Running
Type
------E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
Link
State
----Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Active
Link
Speed
----10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
10Gb/s
show blade cpuX temp - see show blade cpuX env
show blade cpux voltage - see show blade cpuX env
show blade psX – This command displays the operational attributes of a specific power supply blade.
keywords may be used to request a variety of summary information.
Usage:
show blade <psX> [ leds ]
Example:
SANbox-top207 #> show blade ps0
Current Blade Type
PSBF
Beacon
Off
Fault Status
None
Current Faults
None
PSBF indicates back-to-front airflow. Make sure all PS and FAN blades have the same airflow.
Index
9 BladeInfo | QLogic Corporation
Optional
Blade Info
show blade psX leds - This command displays the led status on the specified blade. This command output is
included with "show support" but is otherwise only available with "set debug on" as a CLI command.
SANbox-top207 #> show blade ps0 leds
LEDs on PS0:
ModuleGood
On
Fault
Off
Beacon
Off
Troubleshooting: This information is useful when the switch is at a remote site.
show blade fanX – This command displays the operational attributes of a specific fan blade.
Optional keywords
may be used to request a variety of summary information.
Usage:
show blade <fanX> [ leds ]
Example:
SANbox-top207 #> show blade fan0
Current Blade Type
FANBF
Beacon
Off
Fault Status
None
Current Faults
None
FANBF indicates back-to-front airflow. Make sure all PS and FAN blades have the same airflow (beware all who do
RMAs).
show blade fanX leds - This command displays the led status on the specified blade. This command output is
included with "show support" but is otherwise only available with "set debug on" as a CLI command.
SANbox-top207 #> show blade fan0 leds
LEDs on FAN0:
ModuleGood
On
Fault
Off
Beacon
Off
Troubleshooting: This information is useful when the switch is at a remote site.
show blade MP – This command displays the operational attributes of the chassis maintenance panel.
keywords may be used to request a variety of summary information.
Usage:
show blade MP [ leds ]
Example:
SANbox-top207 #> show blade mp
Current Blade Type
MP
Beacon
Off
Fault Status
None
Current Faults
None
Index
10 BladeInfo | QLogic Corporation
Optional
Blade Info
show blade MP leds - This command displays the led status on the maintenance panel. This command output is
included with "show support" but is otherwise only available with "set debug on" as a CLI command.
SANbox-top207 #> show blade mp leds
LEDs on MP:
ChassisGood
On
Beacon
Off
PowerGood
On
Fault
Off
CPU0_ModuleGood
On
CPU0_Primary
On
CPU0_Heartbeat
Blink
CPU1_ModuleGood
On
CPU1_Primary
Off
CPU1_Heartbeat
Blink
Troubleshooting: This information is useful when the switch is at a remote site.
show env - This command displays information about the temperature and voltage sensors on the system.
is specified, then only information for that blade is shown.
Usage:
show env [BLADE]
[BLADE] may be one of:
IO0
IO slot 0
IO1
IO slot 1
IO2
IO slot 2
IO3
IO slot 3
IO4
IO slot 4
IO5
IO slot 5
IO6
IO slot 6
IO7
IO slot 7
CPU0
CPU slot 0
CPU1
CPU slot 1
Example:
SANbox-top207 #> show env
Temperature(C) Sensors:
Blade ID Sensor Description
-------- ------ ----------IO0
0 BOARD
IO0
1 DS1780
IO0
2 MAX1617
IO0
3 ASIC
IO1
0 BOARD
IO1
1 DS1780
IO1
2 MAX1617
IO1
3 ASIC
CPU0
0 BOARD
CPU0
1 DS1780_0
CPU0
2 DS1780_1
CPU0
3 MAX1617_0
CPU0
4 ASIC_0
CPU0
5 MAX1617_1
CPU0
6 ASIC_1
CPU1
0 BOARD
CPU1
1 DS1780_0
CPU1
2 DS1780_1
Status
-----Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Current
------37
27
38
52
37
27
37
53
24
23
24
26
50
27
55
24
23
24
High Warn
--------75
65
75
110
75
65
75
110
75
65
65
75
110
75
110
75
65
65
Index
11 BladeInfo | QLogic Corporation
High Alarm
---------85
70
90
120
85
70
90
120
85
70
70
90
120
90
120
85
70
70
If BLADE
Blade Info
CPU1
CPU1
CPU1
CPU1
3
4
5
6
Voltage Sensors:
Blade ID Sensor
-------- -----IO0
0
IO0
1
IO0
2
IO0
3
IO0
4
IO1
0
IO1
1
IO1
2
IO1
3
IO1
4
CPU0
0
CPU0
1
CPU0
2
CPU0
3
CPU0
4
CPU0
5
CPU0
6
CPU0
7
CPU0
8
CPU1
0
CPU1
1
CPU1
2
CPU1
3
CPU1
4
CPU1
5
CPU1
6
CPU1
7
CPU1
8
MAX1617_0
ASIC_0
MAX1617_1
ASIC_1
Normal
Normal
Normal
Normal
26
50
27
52
75
110
75
110
90
120
90
120
Description
----------1.5V
1.25V
2.5V
3.3V
12V
1.5V
1.25V
2.5V
3.3V
12V
1.55V
1.25V
1.8V
3.3V
12V
ASIC_0_1.5V
2.5V
ASIC_1_1.5V
3.3V
1.55V
1.25V
1.8V
3.3V
12V
ASIC_0_1.5V
2.5V
ASIC_1_1.5V
3.3V
Status
-----Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Current
------1.48
1.24
2.49
3.31
12.19
1.48
1.24
2.49
3.28
12.12
1.54
1.24
1.79
3.31
12.06
1.47
2.49
1.47
3.32
1.55
1.24
1.79
3.31
12.06
1.45
2.47
1.47
3.28
Low Alarm
--------1.31
1.00
2.20
2.99
10.69
1.31
1.00
2.20
2.99
10.69
1.42
1.00
1.60
2.99
10.69
1.31
2.21
1.31
3.02
1.42
1.00
1.60
2.99
10.69
1.31
2.21
1.31
3.02
High Alarm
---------1.68
1.50
2.82
3.62
13.31
1.68
1.50
2.82
3.62
13.31
1.68
1.50
1.99
3.62
13.31
1.68
2.80
1.68
3.58
1.68
1.50
1.99
3.62
13.31
1.68
2.80
1.68
3.58
Troubleshooting: Status indications other than normal or good indicate a potential cooling or power problem depending on
the specific sensors.
show env <BLADE> - See also "show <BLADE> env"
show leds - This command displays the status of all LEDs of installed blades in the chassis.
This command output is
included with "show support" but is otherwise only available with "set debug on" as a CLI command.
Usage: show leds [BLADE]
Example:
SANbox-top207 #> show leds
LEDs on IO0:
ModuleGood
Fault
Beacon
PowerGood
Heartbeat
Removable
On
Off
Off
On
Off
Off
Index
12 BladeInfo | QLogic Corporation
Blade Info
LEDs on IO1:
ModuleGood
Fault
Beacon
PowerGood
Heartbeat
Removable
On
Off
Off
On
Off
Off
LEDs on CPU0:
ModuleGood
Fault
Primary
Beacon
PowerGood
Heartbeat
Spare
Removable
On
Off
On
Off
On
Blink
Off
Off
LEDs on CPU1:
ModuleGood
Fault
Primary
Beacon
PowerGood
Heartbeat
Spare
Removable
On
Off
Off
Off
On
Blink
Off
Off
LEDs on PS0:
ModuleGood
Fault
Beacon
On
Off
Off
LEDs on PS1:
ModuleGood
Fault
Beacon
On
Off
Off
LEDs on FAN0:
ModuleGood
Fault
Beacon
On
Off
Off
LEDs on FAN1:
ModuleGood
Fault
Beacon
On
Off
Off
LEDs on MP:
ChassisGood
Beacon
PowerGood
Fault
CPU0_ModuleGood
CPU0_Primary
CPU0_Heartbeat
CPU1_ModuleGood
CPU1_Primary
CPU1_Heartbeat
On
Off
On
Off
On
On
Blink
On
Off
Blink
Troubleshooting: This information is useful when the switch is at a remote site.
show leds <BLADE> - See also "show <BLADE> leds"
Index
13 BladeInfo | QLogic Corporation
Blade Info
show media - This command displays information about media devices such as SFP, and XPAK. These devices
provide high/low alarm and high/low warning thresholds. The measured values can be compared with the thresholds to
determine when a particular value exceeds normal operating limits as determined by the manufacturer. If PORT_NUM is
specified, then the information displayed is for port PORT_NUM only. Otherwise, it displays the information for all ports in
the system. This command is only available with the SANdoctor license.
Usage:
show media [ <PORT_NUM> | <PORT_RANGE> | all | installed | <BLADE> ]
<BLADE> may be one of:
IO0
IO slot 0
IO1
IO slot 1
IO2
IO slot 2
IO3
IO slot 3
IO4
IO slot 4
IO5
IO slot 5
IO6
IO slot 6
IO7
IO slot 7
Example:
SANbox-top207 #> show media
Note:
Port
Num
---0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
-- LowAlarm; - LowWarning; + HighWarning; ++ HighAlarm
Blade ID
-Port
-------IO0-0
IO0-1
IO0-2
IO0-3
IO0-4
IO0-5
IO0-6
IO0-7
IO0-8
IO0-9
IO0-10
IO0-11
IO0-12
IO0-13
IO0-14
IO0-15
IO1-0
IO1-1
IO1-2
IO1-3
IO1-4
IO1-5
IO1-6
IO1-7
IO1-8
IO1-9
IO1-10
IO1-11
IO1-12
IO1-13
IO1-14
IO1-15
IO2-0
IO2-1
IO2-2
IO2-3
IO2-4
Vendor Name
----------PICOLIGHT
JDS UNIPHASE
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
NotInstalled
*
*
*
*
*
Temp
Voltage
Tx Bias
Tx Pwr
Rx Pwr
(C)
(V)
(mA)
(mW)
(mW)
----------------------------35.77
3.32
4.91
0.381
0.479
-0.00++
6.55++ 131.07++ 6.554++ 3.302++
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Index
14 BladeInfo | QLogic Corporation
Blade Info
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
IO2-5
IO2-6
IO2-7
IO2-8
IO2-9
IO2-10
IO2-11
IO2-12
IO2-13
IO2-14
IO2-15
IO3-0
IO3-1
IO3-2
IO3-3
IO3-4
IO3-5
IO3-6
IO3-7
IO3-8
IO3-9
IO3-10
IO3-11
IO3-12
IO3-13
IO3-14
IO3-15
IO4-0
IO4-1
IO4-2
IO4-3
IO4-4
IO4-5
IO4-6
IO4-7
IO4-8
IO4-9
IO4-10
IO4-11
IO4-12
IO4-13
IO4-14
IO4-15
IO5-0
IO5-1
IO5-2
IO5-3
IO5-4
IO5-5
IO5-6
IO5-7
IO5-8
IO5-9
IO5-10
IO5-11
IO5-12
IO5-13
IO5-14
IO5-15
IO6-0
IO6-1
IO6-2
IO6-3
IO6-4
IO6-5
IO6-6
IO6-7
IO6-8
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Index
15 BladeInfo | QLogic Corporation
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Blade Info
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
IO6-9
IO6-10
IO6-11
IO6-12
IO6-13
IO6-14
IO6-15
IO7-0
IO7-1
IO7-2
IO7-3
IO7-4
IO7-5
IO7-6
IO7-7
IO7-8
IO7-9
IO7-10
IO7-11
IO7-12
IO7-13
IO7-14
IO7-15
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
show media <BLADE> - See also "show <BLADE> media"
show media <PORT_RANGE> - Displays media information on ports within the specified range.
SANbox-top207 #> show media 0-5
Note:
Port
Num
---0
1
2
3
4
5
-- LowAlarm; - LowWarning; + HighWarning; ++ HighAlarm
Blade ID
-Port
-------IO0-0
IO0-1
IO0-2
IO0-3
IO0-4
IO0-5
Vendor Name
----------PICOLIGHT
JDS UNIPHASE
NotInstalled
NotInstalled
NotInstalled
NotInstalled
Temp
Voltage
Tx Bias
Tx Pwr
Rx Pwr
(C)
(V)
(mA)
(mW)
(mW)
----------------------------35.77
3.32
4.91
0.381
0.479
-127.00-3.30++
66.05++ 3.302++ 3.302++
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
show media installed - Displays media information on ports with installed SFPs.
SANbox #> show media installed
Note:
Port
Num
---0
1
-- LowAlarm; - LowWarning; + HighWarning; ++ HighAlarm
Blade ID
-Port
-------IO0-0
IO0-1
Vendor Name
----------PICOLIGHT
JDS UNIPHASE
Temp
Voltage
Tx Bias
Tx Pwr
Rx Pwr
(C)
(V)
(mA)
(mW)
(mW)
----------------------------35.77
3.32
4.91
0.381
0.479
-127.00-3.30++
66.05++ 3.302++ 3.302++
show media <PORT_NUM> - Displays detailed media information on the specified port.
SANbox #> show media 0
Index
16 BladeInfo | QLogic Corporation
Blade Info
Port Number: 0
-----------MediaType
MediaVendor
MediaPartNumber
MediaRevision
MediaSerialNumber
MediaSpeeds
400-M5-SN-I
PICOLIGHT
PL-XPL-VC-SG3-22
1
450PJ03N
1Gb/s, 2Gb/s, 4Gb/s
Temp
Voltage
Tx Bias
Tx Pwr
Rx Pwr
(C)
(V)
(mA)
(mW)
(mW)
----------- ----------- ----------- ----------- ----------Value
35.77
3.32
4.91
0.381
0.479
Status
Normal
Normal
Normal
Normal
Normal
HighAlarm
70.00
4.00
10.00
0.708
1.585
HighWarning
70.00
3.43
9.00
0.562
1.000
LowWarning
0.00
3.13
0.30
0.126
0.020
LowAlarm
0.00
2.70
0.10
0.079
0.008
SANbox-top207 #> show media 1
Port Number: 1
-----------MediaType
MediaVendor
MediaPartNumber
MediaRevision
MediaSerialNumber
MediaSpeeds
400-M5-SN-I
JDS UNIPHASE
JSH-42S4AA3
F526241700CD
1Gb/s, 2Gb/s, 4Gb/s
Temp
Voltage
Tx Bias
Tx Pwr
Rx Pwr
(C)
(V)
(mA)
(mW)
(mW)
----------- ----------- ----------- ----------- ----------Value
-127.00
3.30
66.05
3.302
3.302
Status
LowAlarm
HighAlarm
HighAlarm
HighAlarm
HighAlarm
HighAlarm
-88.00
0.00
0.00
0.000
0.000
HighWarning
-25.87
0.00
0.00
0.000
0.000
LowWarning
0.00
0.00
0.00
0.000
0.000
LowAlarm
-91.86
0.00
0.00
0.000
0.000
Troubleshooting: With the SANdoctor license, in addition to the show media <option> or show blade <ioX> media
commands, alarms will be generated when media specifications are out of range.
[A][1005.004F][Port:
[A][1005.004F][Port:
[A][1005.004F][Port:
[A][1005.004F][Port:
[A][1005.004F][Port:
[A][1005.004F][Port:
status.]
1][Media
1][Media
1][Media
1][Media
1][Media
1][Media
device
device
device
device
device
device
temperature is -0.00 C. Transitioning from normal to high alarm status.]
voltage is 6.55 V. Transitioning from normal to high alarm status.]
txBias is 131.07 mA. Transitioning from normal to highalarm status.]
txPower is 6.554 mW. Transitioning from normal to high alarm status.]
rxPower is 3.302 mW. Transitioning from normal to high alarm status.]
temperature is -127.00 C. Transitioning from high alarm to low alarm
Index
17 BladeInfo | QLogic Corporation