Bluetooth
YHD-3100
Bluetooth barcode scanner
Manual Guide
32-bit high-speed CPU
Bluetooth
Specification
Frequency：Bluetooth
Charging supply：5V-500mA
Distance：10m
Standby：zero standby
storage：64K=2000 bar code
Battery: 3.7V-1500mAh
Scanner parameters:
Scanning type ：bi-directional
Light source：650nm LD
CPU：ARM 32-bit Cortex
Trigger Mode：Button，
Printing Contract ：>25%
Indication：Buzzer
& LED
Auto-Induction
Resolution ：3.3mil
Scanning width ：30cm
Decoding speed：260scans/sec
Depth
Of
Field
Bit error rate :1/5millon ,1/20million
3.3mil
2mm-100mm
10mil
2mm-350mm
15.6mil
5mm-600mm
35mil
10mm-1000mm
Scanning angle：rotor angel±30°，inclination± 45°，declination ± 60°
Anti inference：industrial lighting or sun will not make any difference
Decoding Capability：UPC/EAN、with complementary UPC/EAN、
Code39、Code 39Full ASCII、Coda bar、industrial /Interleaved 2 of
Code128、
5Code93、MSI、Code11、ISBN、ISSN、China post、etc
Button life ：8000,000 times
laser life：12000 hours
Drop test ：2.0m
Certificate ：CE，FCC，RoHS，IP54
Bluetooth
Bar code scanner setting code
Scanning setting code described function can be realized
Restore defaults
Key Trigger
①
UART 9600，NO，8，1
OFF ID
Continuous Mode
Add ID front
Open the buzzer
Add ID back
Close the buzzer
CR
Tab
CR+Skip
Skip
Disable suffix
Bluetooth
ON/OFF-1
REVERSE (ON)
REVERSE (OFF)
CODE11(ON)
CODE11(OFF)
CODE39(ON)
CODE39(OFF)
FULL ASCLL(OFF)
CODE93(ON)
FULL ASCLL(ON)
CODE93(OFF)
Bluetooth
CODE128(ON)
CODE128(OFF)
CODABAR(ON)
CODABAR(OFF)
ON/OFF-2
INTERLEAVED 2OF5(ON)
INDUSTRIAL 2OF5(ON)
MSI(ON)
INTERLEAVED 2OF5(OFF)
INDUSTRIAL 2OF5(OFF)
MSI(OFF)
Bluetooth
UPCA(ON)
UPCA(OFF)
UPCE(ON)
UPCE(OFF)
EAN13(ON)
EAN13(OFF)
EAN8(ON)
EAN8(OFF)
Match instructions
PS: Be sure the scanner is set to UART mode①
Bluetooth scanner Match
a.Press button the scanner starts, BT module self-checking when red light
flashing, Self-check complete then red light off.
Bluetooth
b.Long press button or scanned “Math “Settings, blue light and red flashing
at the same time which means in matching mode
c.Choose the scanner is going to pair with the device ,after
connection Successful ,scanner start to beep twice with
blue light on ,red light off .
Match
Charging
Connect the scanner to USB cable to charge, When charging the
green light, Charging complete green light off.
Bluetooth Setting
-1
sleep time setting
Into sleep time setting
Bluetooth
30seconds
2minutes
10minutes
Not sleep
Mode setting
Instant upload Mode
storage mode
not lost mode
Upload data
Show total storage
Zero clearing
Shutdown
Wireless to factory reset
Bluetooth Common Setting
Language
-2
Bluetooth
UNITED STATES(default)
GERMANY
FRANCE
ITALY
RUSSIAN(only BT)
Bluetooth mode
HID mode (default)
SPP mode
Show/hide IOSkeyboard
Bluetooth upload speed
Upload speed-slow
Upload speed-fast (default)