PROGRAM: PLASTICITY 2016, Sheraton Kona, Jan. 3-9
Rev. 24, Jan. 6, 2016 (Almost Final)
On conference dinner day, eat light lunch as most likely the conference dinner will be the best meal that you
will eat on the island during your visit.
This resort/hotel is totally smoke free, smoking is not allowed even on the balcony. There are some designated
areas for smoking. There is $300 charge if your room has a smoke smell any time during your stay.
In addition to taxi from the airport which is about $50 one way, there is a speedi shuttle,
http://www.speedishuttle.com/ that you can make reservations online and this one is $13.99 per person. Also
see link for discounted car rental in one of the para. below.
If you have not received the receipt of your registration fee and wish to get one at the conf., then send an E-mail
to symposium@internationalplasticity.com and we will have it ready for you.
The conference dress code is smart casual, no half-sleeve shirts or half pants for presenters as well as listeners.
Participants staying at Sheraton will be able to purchase reduced price breakfast buffets. At check in you will be
provided with reduced rate breakfast coupons, they are roughly 33% discounted as the price on the coupons is
inclusive of taxes and gratuity. The full breakfast is $20 icluding tax and gratuity (regular rate is $24.99 plus tax
and gratuity) and continental buffet w/o hot food and omlettes is $15 including tax and gratuity (there is no such
option in regular pricing). Although you can get ala carte items at the coffee shop, it adds up to be much more
than the buffet; the coffee shop is ideal if you are going to have bagels and coffee. Also at check in, you will be
provided with 20% discount coupons for breakfast, lunch and dinner in Sheraton restaurants and coffee shop. If
at check-in they forget to give you these coupons, then ask them at that time, or go back later.
Admission to dinners will be using name-tags. Children under 18 will not have name-tags but will be allowed
without name-tags. Thus if a participant does not wear name-tag to the dinner, he/she may be served children’s
menu and no complimentary alcohol. We have slightly changed the menu for the dinner on Jan. 3rd as we have
replaced the cheese crostini in the salad with local poke (marinated local seared Ahi tuna). If you do not eat
poke, you may be able to ask for cheese crostini.
Please note that the program may change some but within your initial hotel reservation dates. Please
inform us if you have any problem immediately to symposium@internationalplasticity.com and it will be
promptly corrected if possible; longer you wait to inform us, harder it will be to change.
The following are complimentary only to our conference registered guests at Sheraton: high-speed
internet access in guestroom; self-parking for 1 vehicle; unlimited local and 1-800 calls as well as 30
minutes of domestic and international (within USA) telephone calls per day; 2 bottles of water daily; use
of the Kona Trolley; and access to Yoga Classes, Cultural Tours, Hula, and Lei Making classes. A
mandatory porterage charge of $5.00 in / $5.00 out per person (plus all applicable taxes) will be assessed
for Customer arrivals or departures to/from Hotel’s facility, at the time of check-in or departure,
requiring luggage handling (haul your own luggage and there will be no charge).
If you have an accompanied person(s) and have not registered him/her, you are required to do so
immediately as dinners have to be ordered much before the conference and these are expensive &
elaborate dinners (see menus at the very end), irrespective of their desire to attend complimentary conf.
dinners or not, see registration form.
Please arrange health, travel or any other insurance that you may need as the conference does not carry
any insurance on your behalf. Sheraton is a high category property, but you should observe normal
safety and health precautions (not leave smart phone, ipad or laptop unattended) and follow normal
health precautions for travelling to a tropical resort, e.g. in selecting tours, do not go to places where you
may get exposed to mosquitoes (e.g. rain forest) and use proper spray (e.g. containing 20-30%DEET) to
safeguard against mosquito and insect bites, as well as wear full sleeve shirt and pant when go out of
Sheraton; check & follow your government guidance/warnings regarding such places. Kona and big
island have had an outbreak of Dengue fever which has peaked around 160 three to four weeks ago, and
those cases are not infectious any more. In last week or so, they have only one case which is the only one
infectious now. Thus the outbreak appears to have almost died down and under full control. According to
Sheraton, they have had no cases of Dengue fever among guests or staff during this period. Thus the fever
was and is in areas away from Sheraton. Please contact Tammie.Carpenter@sheraton.com for further
updates on Dengue in big island and precautions.
This program will change in several revisions until Dec. 28 for last minute cancellations. If you change
your initial reservation, you should arrive at least one day before your presentation (to offset problems
with possible delayed or missed flights and stay at least one day after your paper as it can move up and
down to eliminate conflicts of various kinds. Reservations can be changed online, or by contacting
kori.gacayan@sheraton.com or Eliza.Phillips@sheraton.com. At Royal Kona, reservations can be changed
by writing and to marites.bravo@hawaiianhotels.com .
We have arranged a very special discount (almost 50% off regular rates) with Enterprise rent-a-car, use
https://legacy.enterprise.com/car_rental/deeplinkmap.do?bid=002&cust=L36gp05&referedPage=multiDivOffer
Please note that there is a one day penalty if you do not cancel your reservation 48 hours before your reserved
arrival. These rates are only good for pick up at, and return to Kona Airport. Self-parking is free at Sheraton,
and is $10 per day at Royal Kona, for our conf. participants and their registered guests only. The lowest
daily/weekly rate is $25/$175 plus taxes and fees, but it is only for pickup and drop-off at the Kona airport;
there is a $50 surcharge for not dropping at the airport. This link takes you directly to the discounted rates and
thus you do not need a code.
We are requesting some colleagues to Chair sessions by putting their names on the program. If you
cannot accept our invitation, then please inform us and we will change it. Chairs are requested to bring
their laptops for session that you are chairing, as per our experience, it is most efficient as you know how
to handle your own laptop if there is a problem, alternatively you can use laptop of another presenter in
your session for the same reason. If both alternatives are not possible, there will be laptops available in
the registration room for your use. The main responsibility of the Chair is to make absolutely sure that
papers start and finish at specified times (within one minute of the specified end), as colleagues move in
and out of sessions to attend other papers.
Please print the program just (one day) before your departure to Kona Airport, but after December 28, if
you need a hard copy for your use. The conference will provide only soft copies on memory stick, or you
can download it on your smart phone/ipad/laptop from our website. Hard copies have become obsolete
these days with widespread use of electronic devices.
There is one night cancellation fee and one night early departure fee if you leave earlier than your
reserved dates.
Sunday, January 3, 2016
Registration 9:00 AM - 5:00 PM…………………………….. (Room: Hualalai)
SuA-1 (14:15-16:45)
Influence of Interfaces on
Extreme Environment
Plastic Deformation
Properties of Materials I
(Room: Mauna Loa)
SuA-2 (14:15-17:00)
Exploring New Horizons for Metal
Forming Research I ( in honor of
Dong-Yol Yang)
(Room: Mauna Kea)
SuA-3 (14:15-16:45)
Plasticity of Granular
and Geomaterials I
(Room: Keauhou III)
SuA-4 (14:15-16:45)
Creep, Deformation, Texture,
Nano and Nuclear Materials
I (in honor of K.L. Murty)
(Room: Keauhou IV)
** Leslie Lamberson & Christian
Hellmich
* Christian Hellmich, Bernhard
Pichler, Mehran Shahidi
“Interface-to-bulk upscaling: a
continuum micromechanics
approach”
*Max A. Kaplan, G. E. Fuchs
“Fracture of Cast Ni-base
Superalloy Turbine Components
and the Role of Bifilms”
** A. Keith Pilkey & Jian Cao
* Jeong Whan Yoon, Yanshan Lou, Thomas B.
Stoughton
“anisotropic behavior in plasticity and ductile
fracture of an aluminum alloy”
** Nico Gray & James T.
Jenkins
* Stefan Luding
“Plastic flow theory with
evolution of micro-structure
and anisotropy”
** Indrajit Charit (++) & Blas
Pedro Uberuaga
* Amiya K. Mukherjee
“Creep and superplasticity from
microcrystalline to nanocrystalline
scale”
* Jun-Seok Yoon, Ji-Woo Park, Hadi
Ghiabakloo, Beom-Soo Kang
“Plastic deformation mechanics of 3D sheet metal
forming using flexibly-reconfigurable roll-forming
process”
*James T. Jenkins and Diego
Berzi
“Costitutive relations for
steady shearing of dense
granular aggregates”
*Blas Pedro Uberuaga
“Connecting radiation damage
evolution and grain boundary
microstructure”
* Jian Cao, Jacob Smith, Newell Moser,
Huaqing Ren, Zixuan Zhang, Ebot Ndip-Agbor,
Kornel Ehmann
“Formability in various forming strategies for
incremental forming”
* Jidong Zhao and Ning Guo
“Alternative pathway to
granular plasticity via
computational multiscale
modeling”
+ Satyam Suwas, Sahithya
Kandalam, et. al.
“High temperature deformation
behavior of magnesium alloy WE43”
+ Devendra Verma, Chandra
Prakash, Vikas Tomar
“Strain rate dependent failure of
glass/epoxy interfaces at nanomicroscale via nanoimpact
experiments-rate dependent
cohesive separation models”
+ Leslie Lamberson, Logan
Shannahan, and Michel Barsoum
“Dynamic fracture and damage
evolution of the Ti3SiC2/TiC and
Ti3SiC2/SiC composites”
+ K. Hattar
“Investigating overlapping and
harsh environments via in situ
TEM”
+ Djamel Kaoumi
“Using in-situ tem to study the
response of Ni-based superalloys
under tensile deformation”
* A. Keith Pilkey, Hayley Scott, Grant Bell,
Andrew Sloan, and J. Doug Boyd
“Micro-computed tomography imaging of damage
evolution in advanced high strength steel sheet”
*Nico Gray and Andrew
Edwards
“A depth-averaged µ(I)rheology for shallow granular
free-surface flows”
+Linjiang Chai, Baifeng Luan,
Korukonda L. Murty, Qing Liu
“Microstructural and textural
evolutions of commercially pure
Zr sheet rolled at room and liquid
nitrogen temperatures”
+Randy K. Nanstad, Mikhail A.
Sokolov, and Kim Wallin
“Considerations of specimen size
effects in evaluation of irradiation
effects in reactor pressure vessel
steel”
+ Namsu Park, Hoon Huh, and Sung Jun Lim
“Fracture-based forming limit criteria for
anisotropic materials in sheet metal forming”
+Hesam Askari and Ken
Kamrin*
“The origin of the resistive
force theory in flowable
materials”
+Francis Adzima, Tudor Balan, Pierre-Yves
Manach and Laurent Tabourot
“Comparative study of phenomenological and
C.P.F.E.M. based modeling approaches in sheet
metal forming : application to micro-forming
processes simulations”
+Dong-Kyu Kim, Eun-Young Kim, Wan Chuck
Woo, and Shi-Hoon Choi
“Crystal plasticity finite element modeling and exsitu study of micromech. deform. and
failure behaviors of dual phase steel”
18:00 WELCOME RECEPTION/DINNER (Hawaii Lawn) includes entertainment of history of Hawaii
through music and dances almost 2 hours show.
Monday, January 4, 2016
Registration 8:00 AM-5:30 PM …..……………………………..…….……….(Room: Hualalai )
MM -1 (8:30-10:15)
Metal Forming, Hot working
& Microstructural Analysis
(Room: Mauna Loa)
MM -2 (8:30-10:30)
Exploring New Horizons
for Metal Forming
Research II ( in honor of
Dong-Yol Yang)
(Room: Mauna Kea)
MM -3 (8:30-10:30)
Develop. & App. of Consti.
Desc. for Plast. at
Various Scales (in Memory of
José Grácio I
(Room: Keauhou III)
MM -4 (8:30-10:30)
Plasticity of Granular and
Geomaterials II
(Room: Keauhou IV)
** Thomas Stoughton & Manja
Krueger
*Manja Krüger, Janett Schmelzer,
Torben Baumann, Sebastian Dieck
** Heung Nam Han & Jeong
Whan Yoon(++)
* Toshihiko Kuwabara, Junpei
Kawaguchi, and Takeo Sakurai
** Kaan Inal & Barlat (**)
** Itai Einav (++) & Goddard (++)
* Joe Goddard
“Hardening Effects and deformation
behavior of mechanically alloyed
Vanadium-silicon materials”
“Measurement and modeling of
differential hardening of a 5000
series aluminum alloy sheet and
application to sheet forming
simulations”
*Sung-Tae Hong, Heung Nam
Han, and Myoung-Gyu Lee
* Frédéric Barlat, Youngung Jeong,
Carlos Tomé
“Virtual experiments using the viscoplastic self-consistent framework to
characterize anisotropic hardening
behavior for sheet metal forming”
*Junying Min, Thomas B. Stoughton,
John E. Carsley, Blair E. Carlson,
Jianping Lin, Xueli Gao
“Accurate characterization of biaxial
stress-strain response of sheet metal
from bulge testing”
*Eva-Lis Odenberger, Johan
Svensson, Mikael Schill, Lluís Pérez
Caro, and Mats Oldenburg
“Modeling and simulation of a
manufacturing process chain including
tailor rolling, forming and welding in
alloy 718”
“The effect of electric current on
plastic behaviors of ferrous alloys
and its automotive applications”
*Hoon Huh, Minki Kim
“Identification of the hardening
behavior of sheet metals at high
strain rates considering the prestrain”
+ Jayahari Lade and Swadesh
Kumar Singh
“A comparison of part quality in high
temperature forming of ASS 304 using
BARLAT 3-Parameter Model”
*Heung Nam Han, Moon-Jo
Kim Kyu Hwan Oh and SungTae Hong, and Myoung-Gyu
Lee
“Electric current-induced
deformation behavior Al-Mg-Si
alloy”
Coffee/Tea
*H. Garmestani, A. Tabei, S.
Parvinian, Z. Pan, S.Y. Liang
“Microstructure design of dual phase
titanium alloys during machining”
+ Ji Hoon Kim, Joo-Hee Kang,
Chang-Seok Oh
“A Crystal plasticity Finite element
analysis for developing a macroscopic
constitutive model of polyscrystalline
materials”
+Kaan Inal, Waqas Muhammad,
Abhijit P. Brahme, Jidong Kang,
Raja K. Mishra
“Experimental and numerical
investigation of texture evolution and
the effects of intragranular
backstresses in aluminum alloys
subjected to large strain cyclic simple
shear”
+Marko Knezevic and Milovan
Zecevic
“Predicting cyclic deformation of
AA6022-T4 and DP590 using
polycrystal plasticity”
+ Hojun Lim, Corbett C. Battaile,
and Christopher R. Weinberger
“Multi-scale modeling and
characterization of tantalum”
“Homogenization of granular mechanics
via filters on a satake graph”
* Ken Kamrin
“Multi-scale and trans-phase continuum
modeling of granular flows”
*Itai Einav
“Granular materials under extremes: the
role of grainsize dynamics”
+Thomas Barker, David Schaeffer,
Patricio Bohorquez and Nico Gray
“Well-posed and ill-posed behaviour of
the µ(I)-rheology for granular flow”
+ Lam Nguyen, Behzad Fatahi, and
Hadi Khabbaz
“
A constitutive model for fibre reinforced
cement treated clay”
MM-5 (11:00-12:45)
MM-6 (11:00-13:30)
MM-7 (11:00-13:30)
MM-8 (11:00-13:15)
Multi-faceted Research in
Materials and Mechanics I ( in
honor Hüseyin Sehitoglu)
(Room: Mauna Loa)
Phase Transformation I
(Room: Mauna Kea)
From Creep Damage
Mechanics to
Homogenization Methods I
(In honor of Nobutada Ohno)
(Room: Keauhou III)
Microstructural Plasticity to
Damage Processes under
Dynamic Loading Conditions I
(Room: Keauhou IV)
** Yanyao Jiang(++) & David L.
McDowell
** Valery I. Levitas (++) &
Jiang-Feng Nie
** Takeshi Iwamoto & Holm
Altenbach (++)
** Hashem M Mourad (++) & J. R.
Mayeur (++)
*M.M. Kirka, E.A. Estrada Rodas,
and R.W. Neu
*Duane D. Johnson
*Holm Altenbach, Mykola
Ievdokymov, Konstantin
Naumenko,
and Claus Oberste-Brandenburg
“Constitutive model of cast iron
Under thermo-mechanical loads
Including fatigue damage”
*Hiroshi Okada, Satoshi Kadowaki,
Hijiri Amano and Tetsuya Koshima
“J-integral evaluations in the
problems of finite strain elastoplasticity and of functionally graded
materials”
*F. L. Addessio, C. A. Bronkhorst, T.
Lookman, D. W. Brown, E. K. Cerreta,
C. Bolme
“Single crystal phase transformations
under
Dynamic loading conditions”
“Cyclic crystal viscoplasticity modeling
of nickel-base superalloys in different
aged conditions”
* Jay D. Carroll
“Digital image correlation for
multiscale studies of plasticity”
+ David L. McDowell
“Mesoscale modeling of metal plasticity
to support durability assessment”
+ Yanyao Jiang, Qin Yu, Yin Qiong,
Shuai Dong, Jian Wang
“Twinning-detwinning deformation and
fatigue in magnesium alloys”
+ Xiao-Wu Li, Jong-Guk Yun, Ying
Yan and Yan-Yao Jiang
“Thickness-dependent deformation and
fracture characteristics of AL6XN
super-austenitic stainless steel
subjected to tensile and fatigue loads”
“Predicting phase transformation
pathways in real materials”
* Susan P. Gentry, Anna
Trump, John E. Allison,
Katsuyo Thornton*
“Experiments and simulations of
recrystallization in plastically
deformed titanium”
* J. E. Hammerberg, R. Ravelo, T. C.
Germann and J. Milhans
“Frictional interactions at compressed
ductile metal interfaces – simulations and
models”
* Valery I. Levitas
“Phase field approach to
interface- and surface-induced
phenomena”
* Fusahito Yoshida, Hiroshi
Hamasaki* and Takeshi Uemori
“Constitutive modeling to describe
various cyclic plasticity behaviors of
anisotropic sheets”
+ Hashem M. Mourad, Curt A.
Bronkhorst, Jeeyeon N. Plohr, Ellen K.
Cerreta, and Veronica Livescu
“A study of dynamic shear localization in
elasto-viscoplastic solids: Finite element
simulations and experiments on 316L
stainless steel”
+Thomas R. Canfield and Theodore C.
Carney
“Multiphase strength modeling in flag”
* Jian-Feng Nie
“Shear strain in precipitation and
diffusional phase
transformations”
*Takeshi Iwamoto
“A path integral based on the
configurational force and its
application to evaluate dynamic
fracture toughness with phase
transformation in trip steel”
+Klaus Hackl, Philipp Junker
“Micromechanical modeling of
shape memory alloys - energies
and evolution”
+ Yusuke Kinoshita, Atsushi
Matsubara, and Nobutada Ohno
“Effects of faceting on torsional
properties of boron nitride
nanotubes”
+ Dai Okumura, Akifumi Kondo,
Nobutada Ohno
“An extended model with two scaling
exponents that describe mechanical
and swelling behaviors of elastomers”
+ Liming Xiong, Ji Rigelesaiyin, Xiang
Chen, Shuozhi Xu, David L. McDowell
and Youping Chen
“Quantifications of the complex dynamics
of fast moving dislocations in
heterogeneous materials by a concurrent
atomistic-continuum method”
+ Duan Z. Zhang and Christopher C.
Long
“Ensemble phase averaging technique
and dual domain material point method
for modeling ductile materials”
+ Jeffrey H. Nguyen, Minta C. Akin,
Paul D. Asimow, and Neil C. Holmes
“Radiance measurement and plastic
deformation on ramp loading”
+Qian Yu, Amit Samanta, Josh
Kacher, Christoph Gammer,
Mark Asta, Daryl Chrzan,
Liang Qi, Andrew Minor
“Formation of face-centered
cubic phase in titanium”
+Yilin Zhu, Kang G. Z. and Kan Q.
H.
“A new kinematic hardening rule
describing different plastic moduli in
monotonic and cyclic deformations”
MA-1 (14:15-17:15)
Interactions between Nano and
Micro-structural Evolution, &
Mechanical Behavior
(Room: Mauna Loa)
MA -2 (14:15-17:15)
Continuum mechanical
and variational aspects of
materials deformation ( in
honor of Khanh Chau Le)
(Room: Mauna Kea)
MA -3 (14:15-17:00)
Macroscopic and Multiscale
Approach of Cyclic Plasticity
I ( in honor of Georges
Cailletaud and Jean-Louis
Chaboche)
(Room: Keauhou III)
MA -4 (14:15-17:15)
Plasticity of Granular and
Geomaterials III
(Room: Keauhou IV)
** Asle Zaeem (++) & Mark
Horstemeyer
** Klaus Hackl (++) & Dennis
M.Kochmann (++)
** Lakhdar Taleb (++) & Tasnim
Hassan (++)
** Itai Einav(++) & Joe Goddard (++)
*Mark Horstemeyer, Youssef Hammi
and Morgan Green
“Process-structure-properties included
in an internal state variable plasticitydamage model and its application to a
car crash”
* Amy J. Clarke, Damien Tourret,
Seth D. Imhoff, John W. Gibbs, Paul
J. Gibbs, Younggil Song, Alain
Karma, Neil N. Carlson, K. Fezzaa,
pRad Team
“Visualization and control of metal
alloy solidification dynamics”
+Mohsen Eshraghi and Sergio D.
Felicelli
“Application of lattice boltzmann
method in modeling microstructural
evolution”
+Sergio D. Felicelli and Mohsen
Eshraghi
“Large-scale simulations of
dendritic solidification”
+Daniel Schwen and Michael R.
Tonks
“Phase field mechanics coupling using
modular free energies in the MOOSE
finite element framework”
* Victor L. Berdichevsky
“Which Macroscopic Parameters
Characterize Dislocation
Networks?”
* Xiaohui Chen, Xu Chen
*Hisao Hayakawa, and Koshiro Suzuki
“Theory of jammed granular flow under a
plane shear: a quantitative description of
the divergence of viscpsity”
+ N. Abdolrahim, A. J. Vattré, K.
Kolluri, and M. J. Demkowicz
“Computational prediction of semicoherent interfaces using reduced order
models”
* Andrej Cherkaev
“Relaxation of multiwell
lagrangians and structures of
multiphaase optimal composites”
*Lakhdar Taleb, Clément Keller
“Cyclic accumulation of the inelastic
strain observed in 304l ss subjected to
uniaxial stress control at room
temperature: creep, ratcheting or
fatigue damage?”
*Teruo Nakai, Hossain Md. Shahin and
Hiroyuki Kyokawa
* Dennis M. Kochmann,
Yingrui Chang
“ Deformation and failure
mechanisms in polycrystalline
magnesium”
*Zihui Xia and Yanxiang Zhang
“Deformation phase diagram for coke
drums under thermal-mechanical
cyclic loading”
* Klaus Regenauer-Lieb, Thomas
Poulet, Jie Liu, Florian Wellmann, Ali
Karrech and Hui Tong Chua
“Uncertainty in plastic flow of earth
materials: from geodynamics to
engineering applications”
*Robert Kießling, Ralf
Landgraf, Robert Scherzer,
Jörn Ihlemann
“Material modelling based on
directly connected rheological
elements in nonlinear continuum
mechanics”
*Bob Svendsen
“Discrete and coarse-grained
continuum
thermodynamic models for
dislocation networks”
* Ahmed Zouaghi, Adriana Soveja,
Farhad Rezaï-aria, Thomas Pottier,
Mohammed Cheikh and Vincent
Velay
“Multi-scale surface modeling of the
nonlinear mechanical behaviour of
AISI H11 hot work tool steel”
+ Shang-Lin Zhang, Fu-Zhen Xuan,
Su-Juan Guo, Peng Zhao
“Effect of anelastic recovery on the
cyclic plastic behavior of 9% Cr
ferrite steel under creep-fatigue
conditions”
+ De-Long Wu, Fu-Zhen Xuan, SuJuan Guo, Peng Zhao
“Viscoplastic constitutive modeling of
9-12% Cr steel under high
temperature strain cycling condition”
+ Han Jiang, Chengkai Jiang,
Jianwei Zhang, and Guozheng
Kang
“Constitutive Model for Amorphous
Glassy Polymers with Consideration
of its Microstructure: Cohesional
Entanglement”
*Thomas Weinhart
“Rheological modelling of granular flows
–From discrete particles to continuum
fields”
+Sasan Nouranian
“A modified embedded-atom method
potential for organic
And organometallic material systems”
+K.S. McReynolds, Q. Sherman and
P.W. Voorhees
“Computational materials science:from
atoms to microstructure”
* Mohsen Asle Zaeem, Ebrahim
Asadi, Sasan Nouranian, and Michael
I. Baskes
“Molecular dynamics simulations and
phase field crystal modeling of
solidification and grain growth”
* 30
“Ratcheting behavior of pressurized
90° elbow piping subjected to
reversed in-plane bending”
+ Christian B. Silbermann, Jörn
Ihlemann*
“Prediction of self-organized
dislocation patterns with
continuum dislocation theory”
+ Klaus Hackl, Christina
Günther, Dennis M. Kochmann
“Rate-independent versus viscous
evolution of dislocation
microstructures”
“New description of time-dependent
bahavior of geomaterials not using
ordinary viscoplatic theories”
*Takahiro Hatano
“Granular friction and earthquake faults”
+Qi-Zhi Zhu, Shuang-Shuang Yuan*,
and Lun-Yang Zhao
“A new Griffith-type failure criterion for
microcracked geomaterials”
+ François Guillard, Yoël Forterre,
Olivier Pouliquen
“Drag and lift forces in granular flows”
minutes key-note lecture, + 15 minutes invited presentation ** Chairs ++ Symposium Organi
Tuesday, Jan. 5, 2016
Registration 8:00 AM-5:00 PM …..………………….………..…….………….(Room: Hualalai)
T M-1 (8:30-10:30)
T M-2 (8:30-10:30)
T M-3 (8:30-10:15)
T M-4 (8:30-10:15)
Influence of Interfaces on
Extreme Environment Plastic
Deformation Properties of
Materials I
(Room: Mauna Loa)
Shear Bands and Other
Localizations
(Room: Mauna Kea)
Metallic Glasses
(Room: Keauhou III)
Shear and phase
transformation mechanisms
and their effect on mechanical
behavior I (Room: Keauhou
IV)
** Vikas Tomar(++)& Christian
Hellmich
* Wayne Chen
“Real-time x-ray visualization of
dynamic deformation and
microstructure evolution in metallic
materials under impact loading”
*Kalpana S. Katti, Dinesh R. Katt
** Paul Van Houtte & Stelios
Kyriakides
*Nabil Bassim and S. Boakye-Yiadom
“A comparative study of mechanisms of
formation of adiabatic shear bands
in a bcc meat (steel) and an fcc metal
(pure copper)”
* Nathan Bechle and Stelios Kyriakides
“Evolution of localized deformation in
niti under biaxial stress states part I”
** Robert Maass & Dongchan Jang
**P. D.Wu (++) & M. R. Daymond
*Dongchan Jang
“Plasticity of nano-sized metallic
glasses”
+Nathan Bechle and Stelios Kyriakides
“Evolution of localized deformation in
niti under biaxial stress states part II”
*Robert Maass
“Cavitation and internal stresses
during shear-banding of metallic
glasses”
* Xu-Sheng Yang, Yun-Jiang Wang,
Guo-Yong Wang, Hui-Ru Zhai, L. H.
Dai, and Tong-Yi Zhang
“Stress relaxation behaviors in
nanostructured copper”
*Zishun Liu.Jianying Hu, Yunxing
Li, Yuhao He
“A new constitutive model of shape
memory polymer and the novel pattern
transformation of shape memory
polymer periodic cellular structures”
+M. R. Daymond, H. Abdolvand,
Marta Majkut, Jette Oddershede,
Jonathan P. Wright
“3-D stress development in parent and
twin pairs of a hcp polycrystal:
synchrotron x-ray diffraction and
crystal plasticity fem”
+ H. Qiao and P.D. Wu
“Numerical simulation of twin
nucleation, propagation and growth in
magnesium crystals”
“Interfacial mechanics in biological
nanocomposites”
+Timothy J. Rupert
“Formation and toughening effects of
amorphous interfacial phases”
+ Justin Wilkerson and Thao
Nguyen
“An atomistically-informed kinetic
model for dislocation emission from
interfaces”
+Junying Min, Thomas B. Stoughton,
John E. Carsley and Jianping Lin
“Advanced issues in forming limits Part
I: neck expansion theory and onset of
localized necking”
+ Dinesh R Katti, Kalpana S. Katti
“Role of interfaces in mechanics of
oil shale geological nanocomposites”
+ Henryk Paul, MagdalenaM.
Miszczyk and Julian H. Driver
“Micro- and macro- scaleshear banding
in C{112}<111> - oriented single
crystals of fcc metals”
+ Henryk Paul, and Magdalena M.
Miszczyk
“Mechanism of macroscopic shear bands
formation in polycrystalline copper predeformed by ECAP and subsequently
plane strain compressed”
+ S.J. Fensin, S. M. Valone, E. K.
Cerreta, G. T. Gray III
“Nucleation and evolution of dynamic
damage at bimetal interfaces using
molecular dynamics”
Coffee/Tea
* Paulo S Branicio, Sara Adibi ,
Zhendong Sha, Yong-Wei Zhang,
Shailendra P Joshi
“From localized shear banding to
homogeneous flow in nanoglasses”
+ Yongjiang Huang, YuLung Chiu,
Jianfei Sun
“Deformation behaviors of bulk
metallic glasses during cyclic
nanoindentation tests”
+ Yue Fan, Takuya Iwashita, and
Takeshi Egami
“Thermally activated deformation
mechanism in glasses”
TM-5 (11:00-13:00)
Mechanical response and
structural evolution in
materials for purpose of
plasticity design
(Room: Mauna Loa)
TM-6 (11:00-13:30)
Creep, Deformation, Texture,
Nano and Nuclear Materials II
(in honor of K.L. Murty)
(Room: Mauna Kea)
TM-7 (11:00-13:30)
Multiscale modeling and
characterization in structural
materials I
(Room: Keauhou III)
TM-8 (11:00-13:15)
Micromechanics-based
Approaches for
Inelastic Deformation of
Solids
(Room: Keauhou IV)
** Ya-Fang Guo & H.L.Duan(++)
** I. Dutta & Gary S. Was
*X.Z. Xiao, D.K. Song, H. J. Chu,
H.L. Duan
“Mechanical behaviors of irradiated
fcc nanocrystals and polycrystals with
nanotwins”
*Gary S. Was, Michael D. McMurtrey,
Kale Stephenson, Drew Johnson, Ian
Robertson, Diana Farkas
“The importance of radiation and
deformation in environmentally assisted
fracture”
** Motomichi Koyama & Ikumu
Watanabe (++)
* Ikumu Watanabe
“Characterization of strengthductility relationship with finite
element analysis of periodic
microstructure”
** Sushil Mishara (S) & Ruth
Schwaiger
*Dhriti Bhattacharyya
“Measurement of mechanical property
changes in ion irradiated materials at
the micron- and sub-micron scale”
* Xing-Long,Ye and Hai-Jun, Jin
* M.E. Kassner, K. Smith and C.S.
Campbell
*João Quinta da Fonseca and Fabio di
Goacchino
*Atarzyna Kowalczyk-Gajewska and
Karol Frydrych
“Low temperature creep in pure metals
and alloys”
“Deformation patterns in
polycrystalline deformation: a
comparison between experimental and
crystal plasticity modelling results”
*Motomichi Koyama, Cemal Cem
Tasan, Asif Bashir, Tatsuya
Nagashima, Michael Rohwerder,
Eiji Akiyama, Dierk Raabe,
Kaneaki Tsuzaki
“Multi-scale analysis on hydrogenassisted damage evolution in fe-ni-c
austenite/martensite dual phase steel”
“Micromechanical modeling of
microstructure evolution in metals of
high specific strength”
“Development of high-strength
nanoporous metals by dealloying”
* Lei Zhou, Ya-Fang Guo
“Tensile and compressive
deformation behaviors of
nanotwinned
magnesium ”
+ Lihong Liang, Yueguang Wei
“Increased plasticity and decreased
damage of thin coating systems”
+Xiaozhi Tang, Yafang Guo, Yue
Fan, Sidney Yip, and Bilge Yildiz
“Simulation of flow stress variation
in bcc Fe induced by thermally
activated mechanisms at low strain
rates”
+ Stuart A. Maloy, C. Sun, O.
Anderoglu, T.A. Saleh, G.R. Odette, M.
J. Konstantinović, L. Malerba
“Interstitial effects on radiation
hardening in ferritic steels”
+I. Dutta, M. Liu, L. Meinshausen and
T. K. Lee
“Interfacial sliding under multi-physics
loads and impact in 3d electronic
devices”
+ Hongsuk Lee, Yang Zhang, Vikas
Tomar
“Understanding grain boundary
embrittlement and its correlation with
polycrystalline tungsten fracturecorrelations with high temperature
mesoscale fracture experiments”
+ C. Sun, N. Mara, S. A. Maloy
“Mechanical response of nickel-based
superalloy Rene N4 under extreme
irradiation conditions”
+ S. Poulsen and Peter W. Voorhees
“A verified phase field model for
phase transformations
in Ni-Al-Cr alloys”
+Shingo Ozaki, Toshio Osada, and
Wataru Nakao
“Constitutive equation for isotropic
damage-healing behavior in selfhealing ceramic materials”
+Kensuke Nagai, João Quinta da
Fonseca
“Measurement of slip distrtibution
during reverse loading of a ferritic
steel”
*Zhao-Ping Luo, Guang-Ping Zhang,
Ruth Schwaiger
“Deformation behavior and
microstructural changes of Cu/Au and
Cu/Cr multilayers under sliding
contact”
+ O. Castelnau, M. Bornert, E. Bosso,
………… J.S. Micha, V. Michel, H.
Palancher, E. Plancher, R. Quey, O.
Robach, N. Rupin, J. Stodolna, A.
Tanguy, O. Ulrich, F. Zhang
“Stress field at the micron scale
measured by in situ laue
microdiffraction and hr-ebsd
techniques:recent developments”
+Jambeswar Sahu, Sushil Mishara,
Shanta Chacrabarty, Marrapu
Bhargav
“Microstructure and size effect in
tensile testing of ss304 foils”
+Reeju Pokharel, Ricardo A.
Lebensohn, Robert M. Suter,
Anthony D. Rollett
“3D measured microstructure based
crystal plasticity modeling of grain
scale deformation in polycrystalline
copper”
T A-1 (14:15-17:30)
Computational Plasticity
(Room: Mauna Loa)
** Priya Vashishta & A.H.W. Ngan
* A.H.W. Ngan and H.S. Leung
“Dynamics of full dislocation-density
functions from coarse-graining
discrete dislocation density-vector
fields”
*B P Gautham, A K Singh,
Sreedhar Reddy* and K A
Padmanabhan
“Microstructural engineering and
multi-scale through-process modeling
for use of ICME (integrated
computational materials engineering)
in industry”
*Priya Vashishta, Adarsh Shekhar,
et. al.
“Self-healing materials and damage
from shock induced nanobubble
collapse: reactive molecular
dynamics simulations”
T A-2 (14:15-17:30)
Interface and SurfaceDominated Plasticity, Fracture,
and Fatigue in Metals I
(Room: Mauna Kea)
T A-3 (14:15-16:15)
Dislocations & In-situ
Measurements I
(Room: Keauhou III)
T A-4 (14:15-17:45)
Physical metallurgy
mechanisms of deformation
texture evolution I ( in honor
of Werner Skrotzki)
(Room: Keauhou IV)
** Jason R. Trelewicz (++) & Brad L.
Boyce
*Brad L. Boyce, Timothy A. Furnish
“Detecting abnormal grain growth
during fatigue of nanocrystalline Ni-Fe”
** Tarek M. Hatem & Bjørn
Holmedal
** Satyam Suwas (++) & Irene
J.Beyerlein
*I. Samajdar, A.K. Revelly,
K.V. Mani, D. Srivastava, R.
Tewari and G.K. Dey
“Radiation damage in zirconium:
A microstructural perspective”
* Irene J. Beyerlein
“Effect of bi-phase interfaces on texture
evolution in nanolaminates fabricated
by severe plastic deformation”
*Christopher A. Schuh, Zachary C.
Cordero
“Processing design considerations for
nanocrystalline alloys prepared by severe
plastic straining”
* T.R. Bieler, M.A. Crimp, C.J.
Boehlert, P. Eisenlohr, et. al.
“Combined modeling and experiments to
identify the influence of grain neighbors
on heterogeneous deformation”
*James Belak
“Preparing for the future of
computing: bridging scales within the
exascale materials co-design center”
*Jason R. Trelewicz and Bin Cheng
“The synergistic role of grain boundaries
and amorphous-crystalline interfaces in
the deformation of metallic
nanolaminates”
+ Mohamed Shehata, Tarek M.
Hatem, Michael Haselkorn
“Experimetnal study of build
orientation in direct metal laser
sinetering of 17-4ph stainlesssteel”
+ Jin Yu Zhang, G. Liu, J. Sun
“Size-dependent He-irradiated tolerance
and plastic deformation of
crystalline/amorphous Cu/Cu-Zr
nanolaminates”
+ Suveen N. Mathaudhu, Hao Zhou, et.
al
“Interfacial segregation phenomena in
Mg-Gd-Y-(Ag)-Zr alloys”
+ Sung-Woo Moon and Youssef
M.A. Hashash
“Learning of material response using
evolutionary inverse analysis
techniques”
* Yihui Pan, Zheng Zhong
“Modeling the healing phenomenon
in elastic-plastic elastomers
considering healing kinetics”
+ D.L. Medlin, K. Hattar, J. et. al.
“Defect character at grain boundary
facet junctions: a combined hrstem and
atomistic modeling study”
+Tim M. Smith, Bryan D. Esser, et. al
“Diffusion processes during shearing
events in ni-base superalloys at
intermediate temperatures”
*Bjørn Holmedal
“On the relation between mean free
slip length and work hardening of
metals”
+Daniel Caillard
“Solid solution hardening and
dynamic strain ageing in Fe-X alloys
(X = C, Si, Ni, Al, Cr)”
+Giacomo Po, Markus Lazar, et. al.
“Singularity-free dislocation
dynamics in anisotropic gradient
elasticity”
+Bernard L. Ennis; Enrique
Jimenez-Melero and Peter D. Lee
“In situ study of the effect of
segregation and banding on the
mechanically induced transformation
in multiphase steel”
+Hesam Askari and Hussein Zbib
“A continuum dislocation dynamics
framework for plasticity of
polycrystalline materials”
+Salma I. Salah , Tarek M. Hatem,
et. al.
“Defects evolution for high efficiency
third generation photovoltaic cells”
+E-Wen Huang and Jien-Wei Yeh
“Transition of plastic behavior from
room to elevated temperatures of a
cocrfemnni high entropy alloy”
*R. Chulist, M.J. Szczerba and M.
Faryna
“In-situ investigation on the martensitic
transformation in Ni-Mn-Ga alloys”
+ Satyam Suwas, Radhakrishnan
Madhavan
“Stacking fault energy and texture
evolution in nanocrystalline materials”
+Tamás Ungár, Bertalan Jóni
“Dislocation structure in texture
components”
+Zuzanka Trojanová and Pavel
Lukáč
“Effect of nanoparticles on mechanical
and physical properties of magnesium”
+Qingsheng Zhang
“Effect of shear deformation on
recrystallization of AA3003 alloy”
+Christian Haase, Oliver Kremer, et.
al.
“Microstructure and texture evolution
in a TWIP steel during ecap and
annealing”
+Yusuke Onuki, Shun Fujieda,
Sigeru Suzuki, and Hiroshi Fukutomi
“Enhancement of magnetostrictive
properties of polycrystalline Fe-Ga
alloys by high-temperature deformation
process”
+Allison M. Beese, Beth E. Carroll,
Zhuqing Wang
“Effect of local microstructure on
plasticity behavior of additive
manufactured titanium and steel alloys”
* 30
mins. key-note lect., + 15 mins. inv. Present. ** Chairs ++ Symposium Organizer
Wednesday, January 6, 2016
Registration 8:00 AM-5:00 PM …..………………..…….………….(Room: Hualalai)
WM-1 (8:30-10:00)
WM-2 (8:30-10:00)
WM-3 (8:30-10:00)
WM-4 (8:30-10:15)
Plasticity of Granular and
Geomaterials IV
(Room: Mauna Loa)
Shear and phase
transformation mechanisms
and their effect on
mechanical behavior II
(Room: Mauna Kea)
Mechanisms of
Deformation Twinning &
Hydrogen Embrittlement
and their Effects on Strain
Hardening and Yield
(Room: Keauhou III)
Macroscopic and Multiscale Approach
of Cyclic Plasticity II ( in honor of
Georges Cailletaud and Jean-Louis
Chaboche)
(Room: Keauhou IV)
** Jim N.Mcelwaine & Jianfu
Shao
** Jian Wang (++) & L.H. Dai
** H. Miura & Thorsten Halle
** David L.McDowell & I. Doghri
*Manolis Veveakis, Martin
Lesueur, Mustafa Sari, Thomas
Poulet
“The localization of deformation
in temperature-sensitive
viscoplastic materials”
*L.H. Dai, S.L. Cai, G.G. Ye
*Thorsten Halle, Martin Ecke,
“Shear banding in high speed
machining of metals”
*I. Doghri, M.I. EL Ghezal, L. Adam
“Constitutive modeling of homogeneous and
heterogeneous thermoplastic polymers under small
and large deformations”
*David Littlefield , Bradley
+Ruiyu Wu, Yao Shen, Peidong Wu
Martin
“Validation and calibration of a
constitutive model for concrete”
“The Effectiveness of Taylor-type
polycrystal plasticity model on
predicting shear band development
and the role of geometrical softening
in the development of shear bands”
+ Nan Li, Satyesh K. Yadav,
Xiang-Yang Liu, Richad G.
Hoagland, Natha A. Mara1, Amit
Misra, Jian Wang
“Designing high fracture toughness
nanocomposites via in situ TEM
approach”
Markus Wilke, Sebastian
Hütter, Manja Krüger
“Experimental and molecular
dynamics studies on
twin formation mechanisms in Bcc
iron”
+Armin Abedini, Cliff Butcher,
Michael Worswick, Tim Skszek
“Experimental investigations of
plasticity and fracture of a rareearth magnesium alloy sheet”
*Jim N. Mcelwaine and Neil J.
Balmforth
“plastic failure of granular
material in a drum”
+James Baker, Thomas Barker
and Nico Gray
“A two-dimensional depthaveraged µ(I)-rheology for
granular chute flows”
Coffee/Tea
+Q Zhou , F Wang, P Huang
“Length-scale-dependent
strengthening mechanism of Cu/X
(X=Ru, W) multilayer thin films: effect
of structure transformation”
*Christian Motz, Anas Ghailane, Mohammad
Zamanzade and Daniel Weygand
“Dislocation interaction and damage evolution at
grain boundaries studied by cyclic loading of bicrystalline micro samples”
+Ran Liu, Yi Wang, Ying Liu,
De Liang Yin, Jing Tao Wang
“Texture-independent intrinsic
hall-petch relationship in a Mg3Al-Zn alloy”
+ H. Miura and M. Kobayashi
“Microstructure and mechanical
properties of ultrafine grained
magnesium alloys multidirectionally forged under
decreasing temperature
conditions”
+David L. McDowell
“Top-down and bottom-up microstructuresensitive modeling of inelasticity”
+ Haijian Chu, Yuheng Zhang, Jie
+Céline Gérard, Jonathan Cormier, Djamel
Liu, Jian Wang
“Elastic response due to core
spreading of interface dislocation
in anisotropic bimaterials”
Missoum-Benziane+, Nikolay Osipov
“Impact of microstructure evolutions on the
stress/strain distribution at grain boundaries in Nibased superalloys”
+Gustavo M. Castelluccio, David L. McDowell,
Ting Zhu, and Clint B. Geller
“Mesoscale- and environment-sensitive cyclic
crystal plasticity”
WM-5 (11:00-13:30)
WM-6 (11:00-13:30)
WM-7 (11:00-13:30)
WM-8 (11:00-13:15)
Physical metallurgy
mechanisms of
deformation texture
evolution II ( in honor of
Werner Skrotzki)
(Room: Mauna Loa)
Computational Plasticity
(Room: Mauna Kea)
Dynamic Material
Behavior, Modeling, and
Fracture I
(Room: Keauhou III)
Develop. & App. of Consti. Desc. for
Plast. At Various Scales II (in Memory
of José Grácio)
(Room: Keauhou IV)
** T. Al-Samman & Leo A.I.
Kestens
** Seid Koric & Elena Cherkaev
** Michael J. Cox & Shane C.
Schumacher
** C.N. Tome (++) & Laurent Capolungo
* Laszlo Toth, C.F. Gu, B.
Beausir, J.J. Fundenberger, M.
Hoffman
“Polycrystal behavior in the
limiting stage of grain
fragmentation in severe plastic
deformation”
*Leo A.I. Kestens, Linsey
Lapeire, Jurij Sidor, Patricia
Verleysen, Kim Verbeken
“Macro shear-band textures in
cryogenically rolled copper”
* Elena Cherkaev
“Multiscale structure of optimally
designed viscoelastic composites”
* Christopher T. Key, Bryan M.
Love,and Shane C. Schumacher
“Implementation of a finite
deformation hyperelastic-plastic
composite material model within
a shock physics hydrocode”
* P. Hora, M. Gorji, Ch. Raemy
“New concepts for prediction of fracture limits in
thin sheet and bulk metal forming”
+ Cyril Bolis, D. Counilh, D.
Savale
“Testing the strength law of
molybdenum using an explosive
driven rayleigh-Taylor
experiment”
+L.Capolungo, H. Wang, B. Clausen, I.J.
Beyerlein, J. Wang, C.N. Tomé
“Stress and strain relaxation in magnesium AZ31
rolled plate: in-situ neutron measurement and
elastic viscoplastic polycrystal modeling”
+ Michael J. Cox, Alexander. J.
Worley, Paul A. Hooper, and
John P. Dear
“Mechanical behaviour of Al
6061-T6 over the quasi-static to
dynamic strain rate range”
+ Thomas Tancogne-Dejeaun ,
and Dirk Mohr
“Development of al-made trusslattice materials
with stable microstructures”
+ Kengo Yoshida
“Prediction of failure in AZ31 sheet under biaxial
loadings”
+ Xinghua Yu, Rui Cao, Jian
Chen, Paul Crooker and Zhili
Feng
“A constitutive model for dynamic
strain hardening of stainless steel
and nickel alloys”
+ Song Zhenfei, Fan Zhijian,
Xiao Dawu
“Dislocation density based
analyses of plastic deformation of
2024 alloy at various strain rates
and temperatures”
+C.N. Tomé, W. Wen E. Rauch, G. Vincze, F.
Barlat
“Strain path changes in steel and magnesium:
experiments and simulation using a dislocationbased model”
+ Weimin Mao
“Stress equilibrium of Taylor
principles for plastic deformation
of metal polycrystals and
corresponding texture prediction
”
+T. Al-Samman, I. Basu, K.D.
Molodov
“Magnesium alloy design for
lightweight applications:
current challenges and future
trends”
+Ping Yang, Louwen Zhang, Li
Meng, and Weimin Mao
“Influence of rolling reduction on
{100} transformation texture in
an electrical steel”
+Paul Van Houtte
“Deformation texture prediction:
modelling shear-type strain
heterogeneities by means of
rotational flow patterns”
* Werner Skrotzki, Paul
Chekhonin, Juliane
Scharnweber
“Microstructure and texture
formation in laminated metallic
sheets”
* Ke-Shi Zhang, Wolfgang Brocks
“Fatigue life prediction of an FCC
metal at different temperatures”
* Anthony Gravouil, YanCheng
Zhang, Ye Lu, Nawfal Blal, Alain
Combescure
“Efficient hyper reduced-order
model(HROM) for 3d
thermo-elasto-plastic simulations”
* Seid Koric, Fereshteh A Sabet,
Ouli Jin and Iwona M. Jasiuk
“Direct numerical simulation of bone
plasticity and strength”
* Arash Yavari
“The twist-fit problem: finite torsional
and shear eigenstrains in nonlinear
elastic solids”
+ Gang Lu
“Multiscale modeling of hydrogen
embrittlement of metals”
+ Takahiro Mori, Toshihiko Kuwabara, Mineo
Asano, Yoichi Ueno, and Naoyuki Uema
“Hole expansion simulation of a 6000 series
aluminum alloy sheet considering differential
hardening”
* Ricardo A. Lebensohn and Alan Needleman
“Numerical implementation of non-local
polycrystal plasticity using Fast Fourier
Transforms”
+Juan Liao, Xin Xue, Gabriela Vincze, Myoung
Gyu Lee, Frederic Barlat, A. B. Pereira
“Path-dependent modeling for accurate twist
springback in complex channel forming process”
WA-1 (14:15-16:45)
Nanoscale to Micron
Grain Size Materials &
Severe Plastic
Deformation I
(Room: Mauna Loa)
WA-2 (14:15-16:45)
Exploring New Horizons for
Metal Forming Research III
( in honor of Dong-Yol Yang)
(Room: Keauhou III)
WA-3 (14:15-16:45)
Multi-faceted Research in
Materials and Mechanics
II ( in honor Hüseyin
Sehitoglu)
(Room: Mauna Kea)
WA-4 (14:15-16:30)
From Creep Damage Mechanics to
Homo-genization Methods II (In honor
of Nobutada Ohno)
(Room: Keauhou IV)
** Gwénaëlle Proust & Antonia
Antoniou
** Thomas B.Stoughton & MyoungGyu Lee
** Zhe-Feng Zhang & R.W.Neu
(++)
** Tetsuya Matsuda (++) & Shoji Imatani
* Antonia Antoniou
“Synthesis, mechanical properties
and applications of hierarchical
nanoporous metals”
* Myoung-Gyu Lee, Jeong-Yeon
Lee, et. al.
“Development of advanced
anisotropic material models for metal
forming applications”
* Peter Müllner
“Orthogonal shear processes in
shape memory alloys”
* Shoji Imatani
“Microscopic deformation of force chain in
skeletal structures ”
* Andrea Bachmaier, Reinhard
Pippan and Christian Motz
“Strain-induced mechanical
mixing of immiscible alloys using
severe plastic deformation:
mechanical properties and
thermal stability”
*Heon Young Kim, Dae-Young
Kim, Chung An Lee, Myoung-Guy
Lee, and Ngoc-Trung Nguyen
“Failure prediction of magnesium
alloy sheet based on micromechanical void model incorporating
asymmetric plasticity constitutive
law”
* Ibrahim Karaman, E. Dogan,
M. W. Vaughan, S. Wang, G.
Proust
“Microstructural design of mg
alloys through low temperature
deformation processing and
simulation”
* Kenjiro Terada, Seishiro Matsubara
“A Viscoelastic-viscoplastic combined model for
thermoplasatic resins ”
* Roberto Ballarini
“Structural testing at the micro
and nano scales:breaking
invisible specimens with zero
force”
* Junying Min, Thomas B.
Stoughton, John E. Carsley and
Jianping Lin
“Advanced issues in forming limits
Part II: reconciliation of
measurements of localized necking
limits”
+Zhe-Feng Zhang, Lin-Lin LI,
et. al
“Grain boundary and twin
boundary: stronger or weaker to
resist fatigue cracking?”
+ B. J. Blankenau, H. Sehitoglu,
E. Ertekin
“Prediction of entropy changes in
shape memory alloy phase
transitions from first principles:
applications to magnetocaloric
and elastocaloric cooling and
refrigeration”
+ Mayu Muramatsu, Kenjiro Terada and
Tatsuya Kawada
“Mechanical simulation
considering the evolution of microstructure in the
ferroelastic material LSCF”
+ Yuki Onishi
“Performance of smoothed finite element methods
with tetrahedral elements in large deformation
elasto-plastic analysis”
* Shaohua Chen, Yin Yao,
Yaochi Wei
“A new theory for nanomaterials”
+Gustavo Capilla González, Hiroki
Hasegawa, et. al.
“Determination of uniaxial largestrain workhardening of high strength
steel sheets from in-plane stretch
bending test”
+ S. J. Lim, H. Huh, Y. Lou, I. J.
Park, H. W. Kim
“Modified lou-huh ductile fracture
criterion of sheet metals at a wide
range of strain rates ”
+ Soo Sik Han, Tea Ho Kim, Kwang
Geun Chin
“A feasibility study on application of
TWIP steel to hybrid car fuel tank
with Fe analysis”
+R. Liu, X. H. An, Z. J. Zhang,
P. Zhang and Z. F. Zhang
“Improving tensile and fatigue
properties of Cu alloys through
controlling their deformation
mechanisms”
+ Xiaobo Yu, Chris Wallbrink
and Qianchu Liu
“Softening and re-hardening of
7075 aluminium alloys under
variable amplitude loads”
+Antonios Kontsos
“Microstructure-sensitive fatigue
via multiscale experimental
mechanics and multimodal
characterization”
+ Masakazu Kudo, Junichi Takahashi,
Toshiharu Yamamoto,Makoto Uchida, and
Yoshihiro Tomita
“Multiscale modeling approch about degradation
of mechanical properties for polymeric materials”
+ Geunsu Joo and Hoon Huh
“An improved device for the
tension/compression test at
intermediate strain rates”
* Jian Wang, Nan Li, Carlos N
Tome, Amit Misra, Scott X Mao
“Pure-shuffle mechanisms of
localized shear deformation”
+ Chenlu Meng, Zizhao Huang,
Xiaoyu Mei, Weiping Hu
“ The thermal influence on
dynamic strain aging of ultrafine
grained Al-Mg alloy”
* Gwénaëlle Proust, Delphine
Retraint, et. al.
“Microstructural characterization
of a cobalt-chromiummolybdenum alloy subjected to
surface mechanical attrition
treatment”
+ Isamu Riku and Koji Mimura
“Computational modeling of
double network hydrogel ”
+ Yoshinobu Shimamura, Kazuyuki Kobayashi,
Takao Koyama, Asumi Sugimura and Masahiro
Arai
“Application of homogenizing method for
analyzing damped
vibration of composite plates”
17:00-17:50 Khan International Medal/Award Plenary Lecture (**Cailletaud; Room: Keauhou III & IV )
………Carlos Tome, “Recent advances in modeling the constitutive response of aggregates: the importance of introducing
probabilistic distributions”
* 30
minutes key-note lecture, + 15 minutes invited presentation ** Chairs ++ Symposium Organizer
Thursday, January 7, 2016
Registration 8:00 AM-5:00 PM …..………………..…….………..………….(Room: Hualalai )
ThM-1 (8:30-10:15)
Dislocations & In-situ
Measurements II
(Room: Mauna Loa)
ThM-2 (8:30-10:15)
Crystal Plasticity I
(Room: Mauna Kea)
ThM-3 (8:30-10:30)
Hot Working, Metal
Forming, Fracture &
Microstructural Analysis
(Room: Keauhou III)
ThM-4 (8:30-10:30)
Creep, Deformation, Texture, Nano
and Nuclear Materials III (in honor
of K.L. Murty)
** Daniel Caillard &
Krishnaswamy Ravi-Chandar
* Klaus-Dieter Liss
“In-situ diffraction studies related
to thermo-mechanical processes”
** C.Y.Sun & Eduardo Bittencourt
** Gary S. Was & Rajiv S. Mishra
* Bennett C. Larson and Anter
El-Azab
“Submicron resolution 3d x-ray
microscopy and dislocation
dynamics study of geometrically
necessary dislocation densities
anddislocation cell structures in
deformed cu”
+ Eduardo Bittencourt and Prabhat
K. Agnihotri
“A comparison between dynamic
discrete dislocation and higher-order
crystal plasticity in the indentation of
a single crystal”
** Alexander Staroselsky & Todd
Leonhardt
* Todd Leonhardt,Sean Agnew,
and James Ciulik
“Alteringthe texture of molybdenum
tubing by thermo-mechanical
processing”
* Andreas Stark, Marcus Rackel,
Aristide Tchouaha Tankoua,
Michael Oehring, Lars
Lottermoser, Norbert Schell,
Andreas Schreyer, and Florian
Pyczak
“Texture evolution in multiphase
titanium aluminide alloys during
hot-forming – an in situ synchrotron
radiation study”
* Andrew J Gross,
Krishnaswamy Ravi-Chandar
“On the deformation and failure
of al 6061-t6 at low triaxiality
evaluated through in situ
microscopy”
+ Lin Gu
“Direct observation of local
lattice distortion in electrode
materials for lithium-ion batteries
by aberration-corrected electron
microscopy”
* Yoshiteru Aoyagi
“Multiscale crystal plasticity
simulation on yield surface of
ultrafine-grained metal”
+ C.Y. Sun, N. Guo, M.W. Fu, X.R.
Guo
“Crystal plasticity modeling of slip,
twinning induced plastic deformation
based on dislocation density for TWIP
steel”
+Jian Liu & Akhtar S. Khan
“Deformation and modeling in
aluminum single crystal at low to high
strain rates”
+ Xu Zhang and Fulin Shang
“Second-order work and strain burst
in single-crystalline micropillar
plasticity ”
+ Magdalena M. Miszczyk, Henryk
Paul, Julian H. Driver
“Plastic flow instabilities formation in
nominally stable {110}<001>oriented copper single crystal”
* Dieter Siegele, Johannes Tlatlik
“Assessment of fracture probability
under thermal transient loading local approach modeling and
experimental validation”
* Alexander Staroselsky, Thomas
J. Martin, Robert Barth, and
Robert Hutchinson
“The Influence of thermal transient
rates on coated turbine parts life
expectancy”
(Room: Keauhou IV)
* Rajiv S. Mishra, Nilesh Kumar,
Mageshwari Komarasamy
“Effect of lattice strain on plasticity of
complex concentrated alloys”
* N.A. Mara, B. Eftink, J. Wang, J.
Carpenter, A. Misra, I.J. Beyerlein
“Interface facilitated deformation in bimetallic
nanolayered composites”
+M. R. Daymond, L. Balogh, F. Long, Q.
Wang, Z. Yao
“Quantifying defects: comparison between
TEM and diffraction line profile analysis”
+ Suveen N. Mathaudhu
“Fighting entropy: strategies for retention of
nanostructured material performance”
+ Jie Lian
“Response of nanostructured ceramics upon
intense radiations”
+ Sven C. Vogel, Donald W. Brown, Bjorn
Clausen, John D. Yeager, and Darby Jon
Luscher
“Temperature-dependent crystallographic
properties and texture evolution of high
explosive powder during compaction”
Coffee/Tea
ThM-5 (11:00-13:15)
Multiscale modeling and
characterization in
structural materials II
(Room: Mauna Loa)
ThM-6 (11:00-13:00)
Plasticity of Granular and
Geomaterials IV
(Room: Mauna Kea)
ThM-7 (11:00-13:00)
Size Effects, Microstructure,
Fracture & Yield Criteria &
Creep Rupture
(Room: Keauhou III)
ThM-8 (11:00-13:15)
Interface and Surface-Dominated
Plasticity, Fracture, and Fatigue in
Metals II
(Room: Keauhou IV)
** Takahito Ohmura (++) &
Motohiro Yuasa
* Douglas Stauffer, Eric
Hintsala, William W. Gerberich,
S.A.S Asif
“Correlative nanomechanical
measurements for complex
engineered systems”
** Richard Wan & Anthony R.
Thornton
* Anthony R. Thornton
“Multi-scale modelling of granular
flows: from inclined planes to drums,
via a volcano”
** William M.Scherzinger &
Stefanos Papanikolaou
* Nasr Ghoniem*, Benjamin
Ramirez, Giacomo Po, Can Erel,
and Yinan Cui
“Strain bursts and self-organized
criticality in submicron plasticity”
** Timothy J.Rupert(++) & Shen Dillon
* Guoqiang Xu, Michael J. Demkowicz
“Brittle intergranular fracture frustrated by
intermittent dislocation emission”
* Motohiro Yuasa, Naoki
Miyazawa, Mamoru Mabuchi,
and Yasumasa Chino
“Stretch formability of Mg-Zn-X
alloys (X=Ca, Sr and Ba)：
experimental and first-principles
studies”
* WaiChing Sun, Kun Wang
“A semi-implicit discrete-continuum
coupling method for two-phase wetted
granular solid based on the effective
stress principle at finite strain”
* Stefanos Papanikolaou
* Shen Dillon, Miao Wang, Salman Arshad,
“Dislocation dynamics in
nanopillars: strengthening and
abrupt plastic event statistics ”
and Robert Averback
“Thermochemical biasing of solutedislocation interactions at interfaces during
severe plastic deformation”
* Takahito Ohmura, Ling
Zhang, Takuya Suzuki, and
Nobuaki Sekido
“Advanced nano-mechanical
characterization of bcc irons for
better performance in structural
materials”
* Mario Liu and Jiang Yimin
“Granular solid hydrodynamics
(GSH): from static stress and
elastoplastic motion to fast dense
flow”
* William M. Scherzinger
“Implementation and analysis of a
robust return mapping algorithm for
anisotropic yield surfaces”
+ Leslie Lamberson, Logan Shannahan
“Dynamic Electromechanical Response of PZT
in the Morphotropic Phase Boundary”
+ Corbett C. Battaile, Joseph E. Bishop, and
Hojun Lim
“Direct numerical simulations of grain-scale
crystal plasticity in engineering components”
+ Huaqing Ren, Jiachen Xu, and
Jian Cao
“A novel method of measuring the
tensile and compressive behaviour
of thin metal sheet”
* Richard Wan, Mehdi Pouragha
“Microstructural redundancy as a
model for yielding in
granular materials”
*Zbigniew L. Kowalewski
“Methods for creep rupture analysis
– previous attempts and new
challenges ”
+D.C Bufford, W. M. Mook, and K. Hattar
“Correlating grain orientation and grain
boundary character to the failure path in
nanocrystalline metals”
+ Masahiro Kubo, Hiroshi
Yoshida, Akihiro Uenishi,
Yoshiaki Nakazawa, Takayuki
Hama, Hirohiko Takuda
“In-situ observation of
microstructure variations under
biaxial tensile state of Steel
sheets”
+ Zixuan Zhang, Huan Zhang,
Huaqing Rena, Newell Mosera,
Taekyung Leea, Qiang Zenga,
Kornel Ehmanna, and Jian
Caoa
“Springback reduction in
incremental forming”
+ Janelle P. Wharry, Matthew J. Swenson,
and Corey K. Dolph
“Influence of irradiation particle and dose
rate on strengthening mechanisms of model
ods alloy”
+ Steph J Bredenhann, Cor
Kasbergen, Tom (A) Scarpas, and
Kim J Jenkins
“Modelling the behaviour of bitumen
stabilised material (bsm) under
repeated loading”
+ Johannes Knust, Malte Stonis,
and Bernd-Arno Behrens
“ Feature based prediction of form
filling for preform optimization of
hot forging processes”
+Timothy J. Rupert
“Nanocrystalline grain boundary engineering
with cyclic plastic deformation”
ThA-1 (14:15-17:30)
ThA-2 (14:15-17:45)
ThA-3(14:15-17:15)
ThA-4 (14:15-17:30)
Damage & Ductile
Fracture, and Crack
Propagation
(Room: Mauna Loa)
The role of grain boundaries
and interfaces in plast. and
deform. Microstructure
formation
(Room: Mauna Kea)
Polymers, Solid Solutions
(Room: Keauhou III)
Small Scale Plasticity and
Microstructural Evolution
(Room: Keauhou IV)
** Dirk Mohr & Florence
Andrieux
* Florence Andrieux and DongZhi Sun
“Modeling of anisotropic
deformation and failure behavior
of aluminum alloys for crash
simulation”
** Sean R. Agnew (++) & Raja
Mishra
* Raja K. Mishra, Edward Cyr,
Mohsen Mohammadi, Kaan Inal
“Numerical modeling of formability of
aluminum alloys at elevated
temperatures using a thermo-elastoviscoplastic crystal plasticity
framework”
* S. Saimoto, P. Van Houtte, K. Inal
and M.R. Langille
“Derivation of constitutive relations
for biaxial stress states to replicate
the yield locus encompassing texture
and work-hardening”
** Leif Kari & Shaoxing Qu
** Jeffrey W.Kysar (++) &
Christian F. Niordson (++)
* William Gerberich, Eric Hintsala,
Roberto Ballarini
“Mechanical properties: verifiable dislocation
approaches to computational atomistics”
* M. Coret, J. Réthoré, P.
Chaudet
“DIC and I-DIC for ductile
tearing monitoring using ultra
high resolution cameras and non
local damage model
identification”
* Bin Liu, Si Xiao, He-Ling
Wang, Keh-Chih Hwang
“The surface-forming energy
release rate based fracture
criterion for elastic-plastic crack
propagation”
* Sean R. Agnew and Fulin Wang
“Dislocation-twin interactions in
magnesium alloy AZ31”
* Dirk Mohr and Stephane J.M.
Marcadet
“Critical hardening rate model to
predict ductile fracture after
complex loading histories”
* J.Q. Ran, Ming W. Fu
“Analysis and prediction of
ductile fracture in micro-scaled
plastic deformation by using
uncoupled ductile fracture
criteria”
+ Christian C. Roth, Borja
Erice1, Keunhwan Pack ,and
Dirk Mohr
“Effect of strain rate, temperature
and stress state on ductile fracture
initiation: experiments and
localization analysis”
+ Martin Kroon and Jonas
Faleskog
” A J2-J3–dependent constitutive
model for porous plasticity”
+ Keunhwan Pack ,and Dirk
Mohr
“Domain of shell-solid
equivalence to predict ductile
fracture with shell elements”
* Esteban P. Busso
“On the incorporation of
environmental effects in multi-scale
modelling approaches”
+ Christopher D. Barrett, Haitham
El Kadiri, Mohammed Cherkaoui
“Measurement of disconnection
mobility via generalized interfacial
fault energies”
+K. Máthis, J. Čapek, B. Clausen,
T. Krajňák, D. Nagarajan
“In-situ study of the influence of the
aluminum content on twinning and
dislocation slip in mg-al alloys”
+ J-S. Lecomte, Z-Z. Shi, T.
Richeton, S. Berbenni, P-A. Juan,
L. Capolungo, Y. Zhang, F. Wagner
“Micromechanical analysis of
secondary extension twinning in a
magnesium alloy”
+K. Inal, E. Popova, A. Brahme,
S.R. Agnew, R.K. Mishra
“Numerical modeling of magnesium
alloys at elevated temperatures
accompanied by dynamic
recrystallization”
+ Konstantin D. Molodov, Talal AlSamman, Dmitri A. Molodov
“On the role of extension twinning in
the plasticity of magnesium”
* Ryohei Seto, Romain Mari,
Jeffrey F. Morris, Morton Denn,
and Eliot Fried
“Connections between the shear
thickening and jamming of colloidal
suspensions”
* Shaoxing Qu
“Tough and ductile cyro-hydrogels”
* Khanh C. Le, M. Baitsch, Tran, T.M.
“Dislocation structure during microindentation”
* Theo Tervoort, Coen Clarijs and
Walter Caseri
“Molecular deformation of model
rubber networks”
* Christian F. Niordson
“On micron scale void growth”
* Qianxi Yang, and Guoqiang Li
“Temperature and rate dependent
thermomechanical modeling of
shape memory polymers with physics
based phase evolution law ”
+ Daniel Juhre, Rathan
Raghunath and Manfred Klüppel
“A physically motivated model for
filled elastomers including strain
rate and amplitude dependency in
finite viscoelasticity”
* Jeffrey W. Kysar
“On the full experimental recovery of
geometrically necessary dislocation densities”
* Carl V. Thompson, Hang Z. Yu
“The origin and effects of inelastic
deformation during growth of polycrystalline
thin films”
+ Leif Kari and Rickard Österlöf
” Viscoplasticity of filled elastomers
by a modified boundary surface
model and fractional derivatives”
+ Artur Rozanski, Artur Krajenta
“Role of the amorphous phase
during plastic deformation of high
density polyethylene”
+ Hussein M. Zbib
“A mesoscale model of plasticity:
dislocation patterns, size and stochastic
effects”
+ Francisco Pires, Mohsen
Mirkhalaf, Ricardo Simoes
“Continuum modelling of
heterogeneous polymers”
+ Antonios Kontsos , Konstantinos P.
Baxevanakis, Michael Cabal
“Computational modeling of microstructuredependent strain localization in magnesium
alloys”
+ Daniel S. Balint, B. Gurrutxaga–Lerma,
D.S. Dini, A.P. Sutton
“The mechanisms governing plastic response
in aluminum at different strain rates”
+ Julie Lévesque, Raja Mishra and
Kaan Inal
“Numerical modelling of yield
potentials in magnesium alloys”
* 30
minutes key-note lecture, + 15 minutes invited presentation ** Chairs
++ Symposium Organizer
Friday, January 8, 2016
Registration 8:00 AM-5:00 PM …..………………..………………….……….(Room: Hualalai)
FM-1 (8:30-10:15)
Microstructural Plasticity
to Damage Processes
under Dynamic Loading
Conditions II
(Room: Mauna Loa)
FM-2 (8:30-10:30)
Multi-faceted Research in
Materials and Mechanics III
( in honor Hüseyin Sehitoglu)
(Room: Mauna Kea)
FM-3 (8:30-10:15)
Multiscale Plasticity of
Ultrafine-Grained Metals
(Room: Keauhou III)
FM-4 (8:30-10:00)
Macroscopic and Multiscale
Approach of Cyclic Plasticity III
( in honor of Georges Cailletaud
and Jean-Louis Chaboche)
(Room: Keauhou IV)
** C. A. Bronkhorst (++) &
Franz Roters
** G. Z. Kang & Thomas Niendorf
** Osman El-Atwani & Yueguang
Wei
** Esteban Busso (++) & Chaboche
* F. Roters, L. Sharma, S.
* Philipp Krooß, Christoph Somsen,
Peter M. Kadletz, Thomas Niendorf
“The role of plasticity on functional
degradation in high-temperature shape
memory alloys”
* Yueguang Wei
“Mechanical behavior of
nanocrystalline materials
accompanied by Damage and crack
initiations and propagations along
grain boundaries”
+ Hiroyuki Hagiwara, Kodai
Uemori, Yoshihisa Kaneko and
Makoto Uchida
“Fabrication and hardness of
electrodeposited cu-based alloy
coatings having high composition
gradient”
+ Yanbin Wang, Julien Gasc,
Norimasa Nishiyama,Tony Yu,
Feng Shi, Totu Shinmei, and Tetsuo
Irifune
“High-pressure, high-temperature
plastic deformation of polycrystalline
diamonds using synchrotron
radiation”
+ Osman El-Atwani, J. Nathaniel,
A. Leff, Khalid Hattar, and Mitra
Taheri
“ultrafine and nanocrystalline metals
under extrme heat loading and
irradiation conditions”
* Tasnim Hassan, Paul R. Barrett, and
Raasheduddin Ahmed
“Unified viscoplasticity model for high
temperature fatigue-creep and creep
responses”
Zhang, P. Shanthraj
“Including damage modelling
into crystal plasticity
simulation”
* Somnath Ghosh, Jiahao
Cheng and Raj K. Mishra
“Physics-based crystal plasticity
Fe models for predicting
deformation and twinning in
polycrystalline magnesium
alloys”
* Nicholas R. Gates, Ali Fatemi and
Darrell F. Socie
“Transient constitutive behavior in
materials subjected to multiaxial
variable amplitude cyclic loadings:
experimental results and predictions”
* Douglas J. Bammann
“Towards a consistent internal
state variable theory of
inelasticity”
* Yu C., Kang G. Z., Kan Q. H. and
+Khalil I. Elkhodary and
Mohamed A. Bakr
“Plastic bend-twist modes in
dynamically deformed single
crystals with embedded
secondary phases”
Zhu Y. L.
“Rate-dependent cyclic deformation of
super-elastic niti shape memory alloy:
thermo-mechanical coupled and physical
mechanism-based constitutive model”
+ Aaron P. Stebner, Ashley Bucsek,
Garrison Hommer, Jinesh Dahal,
Harshad Paranjape
“Studying the micromechanics of
martensitic phase transformations using
high energy diffraction microscopy”
+ Feifei Fan*and Ting Zhu
“Brittle-to-ductile transition of fracture
in amorphous Li-Si alloys”
Coffee/Tea
+ Yonghao Zhao
“Plasticity of nanostructrured
materials under complex stresses”
+Vinicius Aguiar de Souza, Osamu
Kuwazuru, Masakazu
Kobayashi and Hideyuki Toda
“Experimental and numerical
investigation on the chronology of
fatigue damage in cast aluminum
alloy using microtomography ct,image
processing and image-based finite
element analysis”
+Jian Liu & Akhtar S. Khan
“Fabrication of, deformation in and
modeling of nano-crystalline titanium
at low to high strain rates and
temperatures”.
* Georges Cailletaud
“Kinematic hardening revisited”
+ Jonathan Cormier, Florent Mauget,
Jean-Briac le Graverend, Clara
Moriconi, and José Mendez
“Issues related to the constitutive modeling
of the viscoplastic behavior of Ni-based sx
superalloys under complex thermomechanical histories”
+ Hai Yan,Yu
“A mixed hardening model coupled with the
transformation-induced plasticity effect”
FM-5 (11:00-13:15)
Metal Forming & Computational
Plasticity
(Room: Mauna Loa)
FM-6 (11:00-13:15)
Dislocations and Grain
Refinement
(Room: Mauna Kea)
FM-7 (11:00-13:00)
Phase Transformation II
(Room: Keauhou III)
FM-8 (11:00-13:15)
Develop. & App. of Consti.
Desc. for Plast. at Various
Scales III (in Memory of José
Grácio)
(Room: Keauhou IV)
** Johannes Richter & Kerstin Weinberg
** Lennart Wießner & Yang
Xiang
* Sanda Cleja-Tigoiu and Raisa
Pascan
“Finite elasto-plastic model with
disclinations and dislocations
versus de wit’s model”
** Liming Xiong (++) &
Timothy C. Germann
* Timothy C. Germann, Eric N.
Hahn, Ramon J. Ravelo, Saryu
J. Fensin, Eduardo Bringa, and
Marc A. Meyers
“Large-scale molecular dynamics
studies of shocked tantalum:
orientation and grain boundary
influences on slip, twinning, and
melt/resolidification”
* Ellen Cerreta, Frank
Addessio, Cindy Bolme, Curt
Bronkhorst, Donald Brown,
Turab Lookman, Benjamin
Morrow, Paulo Rigg, and Carl
Trujillo
“The influence of texture on the
dynamic phase transofrmation in
ZR and TI”
** Michael Miles & David Fullwood
* Tim Ricken, Lukas Moj and Ingo
Steinbach
“A multi-scale/-komponent approach for
thermal driven phase transition during
solidification”
* Kerstin Weinberg
“Simulation of material degradation and
fracture by higher-order phase-field models”
* Yang Xiang and Shuyang Dai,
David J. Srolovitz
“Atomistic, generalized Peierls–
Nabarro and analytical models
for (111) twist boundaries in Al,
Cu and Ni for all twist angles”
* Yunping Xi, and Yao Wang
“Composite damage mechanics and its
application to distressed concrete due to
freeze/thaw”
* Stefan Sandfeld
“From dislocation kinematics to
dislocation patterning and work
hardening”
+ Thomas Rousseau, Cecile Nouguier, and
Thierry Hoc
“Finite element crystal plasticity law based
on dislocation dynamics simulation:
application to ultrasonic shot peening”
+Lennart Wießner, Thorsten
Gröb, Peter Groche, Clemens
Müller
“Superposition of grain
refinement and induced
anisotropy for magnetic
hardening”
+ Johannes Richter, Malte Stonis, and
Bernd-Arno Behrens
“Numerical and experimental investigations
of thin flash generation in aluminum forging”
+ Qinxiang Xia, Gangfeng Xiao,
Xiuquan Cheng
“Research on deformation
mechanism of cylindrical parts
with nano/ultrafine grained
structure based on power
spinning”
+ Wlodzimierz Bochniak,
Krzysztof Piela, Andrzej Korbel
Janusz Przewoznik
“Physical properties of aluminum
processed by
The kobo method”
Mohamed Hindy, Mohamed Hamza,
Tarek M. Hatem, Dierk Raabe, Jaafar A.
El-Awady
“Atomistic simulations of hydrogen and
carbon diffusion and segregation in -iron
grainboundaries”
+Liming Xiong, Ji Rigelesaiyin ,
Hao Chen, Xiang Chen, Shuozhi
Xu, Valery Levitas, David L.
McDowelland Youping Chen
“Concurrent atomistic-continuum
simultion of interactions between
dislocations and phase
transformations”
+ Daniel Schneider, Andreas
Reiter, Michael Selzer and
Britta Nestler
“Elasto-plastic phase-field model
accounting for mechanical jump
conditions during solid-state
phase transformations”
+Valery Borovikov, Mikhail I.
Mendelev, and Alexander H.
King
“Effects of stacking fault energy
on dislocation nucleation and
plastic deformation mechanisms
in fcc metals”
+ Jie Wang, and Guiping Li
“Hase field simulation of
magnetization vortex in
ferromagnetic nanomaterials”
* David Fullwood, Isaac Chelladurai,
Andrew Orme, Brent Waters, Rene
Kekoolani, Michael Miles
“Machine-learning study of mesoscale
factors influencing AZ31 twin formation,
and related statistical models”
+Philip Eyckens, Paul Van Houtte,
Hans Mulder, Jerzy Gawad, Henk
Vegter, Dirk Roose, Ton van den
Boogaard, Albert Van Bael
“Multi-scale crystal plasticity modelling
of differential hardening in steels”
+ Sean. R. Agnew, Jishnu. J.
Bhattacharyya, Wilburn. R.
Whittington, and Haitham. El Kadiri
“Measuring and modeling the
anisotropic, high strain rate deformation
of al alloy, 7085, plate in various
tempers”
+ Pengyang Zhao, Thaddeus Song en
Low, Yunzhi Wang , Stephen R.
Niezgoda
“Fully coupled phase-field and elastoviscoplastic fast fourier transform
models for advanced mesoscale thermalmechanical processing simulation”
+ Jinjin Ha, Jinwoo Lee, Ji Hoon Kim,
Myoung-gyu Lee, Frédéric Barlat
“Micromechanical analysis for transient
r-value behavior of ferrite-martensite
dual-phase steel”
+Jeong-Yeon Lee, Myoung-Gyu Lee
and Frédéric Barlat
“Quasi-static dent analyses for
automotive steel sheets using advanced
constitutive models”
+ Michael Miles, Yong-Chae Lim, and
Zhili Feng
“Mechanical properties and modeling of
friction bit joined AA7075 and DP 980”
+ Antti Kaijalainen, Mia Liimatainen,
Vili Kesti, et. al.
“Influence of composition and hot
rolling on the subsurface microstructure
and bendability of ultrahigh-strength
strip”
FA-1 (14:15-17:00)
FA-2 (14:15-16:30)
FA-3(14:15-17:15)
FA-4 (14:15-16:45)
From Creep Damage Mechanics to
Homogenization Methods III (In
honor of Nobutada Ohno)
(Room: Mauna Loa)
High Temperature Creep
Deformation in
Superalloys
(Room: Mauna Kea)
Exploring New Horizons
for Metal Forming
Research III ( in honor of
Dong-Yol Yang)
(Room: Keauhou III)
Finite Inelasticity,
Viscoplasticity & Structural
Applications
(Room: Keauhou IV)
** Dai Okumura (++) & Yuichi Tadano
** Ankit Srivastava & le JeanBriac le Graverend (++)
* Jean-Briac le Graverend,
Jonathan Cormier, ……., Serge
Kruch, José Mendez
“High temperature creep
deformations in Ni-based singlecrystal superalloys”
** Shi-Hoon Choi & A.D.
Rollett
* A.D. Rollett, M.-S. Pham, B.
Gockel, E. Lieberman, S.
Mandal, S. Kashyap
“Development of physically-based
constitutive models for metal
forming”
** Simon Wohletz & Fritz Appel
* Enrique Galida-Nava, Leigh
Connor and Cathie Rae
“Yield stress in multi-modal
nickel-base superalloys”
* Fuh-Kuo Chen, Tzu-Hao
Hung, Cheng-Kuo Liu, PingKun Lee
“Characterizations of formability
and die cooling system in the hot
stamping process”
* Neville R. Moody, Eric Hintsala,
Claire Teresi, E. David Reedy, Jr.,
David P. Adams, Nancy Y. Yang
Daniel R. Kammler, William W.
Gerberich
“Deformation and fracture in scandium
deuteride films”
+ Florent Coudon, Georges
Cailletaud, Jonathan Cormier,
and Lionel Marcin
“A multi-scale strategy for the
numerical modeling of
directionally solidified Ni-base
superalloys at high temperature”
+ L. Mataveli Suave, J.
Cormier, P. Villechaise, D.
Bertheau , Guillaume Benoit,
Georges Cailletaud
“High temperature damage
mechanisms in DS200+HF alloy”
+ Damien Texier, Eric Andrieu,
Daniel Monceau, Serge
Selezneff, Arnaud Longuet
“Brittle to ductile behavior
transition of β-nialpt coated nibased single crystal superalloy at
high temperature”
+ Bing Liu, Tom Arsenlis, Dierk
Raabe, Franz Roters
“Interfacial dislocation motion in
single-crystal superalloys:
dislocation interactions, vacancy
supersaturation, and directional
coarsening”
* Shi-Hoon Choi, Min-Seong
Kim, Ji-Hyun Hwang, MokYoung Lee
“Microtexture development and
texture softening in the weld
region of friction stir welded
AZ31 Mg alloy”
* Simon Wohletz, Peter Groche
“Cold pressure welding – bonding
mechanisms and the effect of surface
treatment on the bond formation”
+ N. Manopulo, J. List, M.
Gorji, P. Hora
“A non-associated flow rule
based YLD2000-2d model”
+Stefano Coratella, Daniel Glaser,
Kristina Langer, ClaudiaPolese
“Preliminary study of distribution of
plasticity in AA2024-T351 thick samples
with non-uniform geometries after laser
shock peening treatment”
+Puikei Cheng, Miguel Bessa,
Xiaoming Bai, Nam Vu-Bac,
and Wing Kam Liu
“A multiscale framework for
modeling Carbon fiber polymer
matrix composites
Incorporating a modified
paraboloid yield surface”
+ Jacob Smith, Wing Kam Liu,
and Jian Cao
“A general anisotropic yield
criterion for combined pressure
and shear dependent materials”
+ Olga I. Bylya , Paul L.
Blackwell , Rudolf A. Vasin
“Approaches for modelling the
behaviour of rheologically
complex materials which
demonstrate flow softening”
+ Nick Bierwisch, Norbert Schwarzer,
Peggy Heuer-Schwarzer
“Plasticity in Industrial Surface and
Coating Optimization - Examples from
Automotive and Avionic Applications”
+ Atsushi Hosoi, Taichi Watanabe, Akira
Kobiki,
Masahiro Kotani, Hiroyuki Kawada
“Evaluation of transverse crack initiation in
CFRTS
and CFRTP laminates under fatigue loading”
+Yuichi Tadano
“Effect of rolling texture on plastic flow
localization of hexagonal metal”
+ Hiro Tanaka, Tofu Nakanishi, Yoji
Shibutani
“Switching of conventional and auxetic
deformations of cellular structure due to
boundary conditions”
Hisashi TANIE, Takashi SUMIGAWA,
and Takayuki KITAMURA
“A highly reliable semiconductor structure
using a nano-spring layer”
+
+ Makoto Uchida and Yoshihisa Kaneko
“Scale-dependent multiscale modeling of
deformation behavior of polymer foam using
rate-form second order homogenization
method”
+Takamasa Yoshikawa, Tadashi Inaba,
Masashi Hiroshima, Atsushi Odake
“Experimental study of anisotropic yield
mechanism of extruded AZ31 magnesium
alloy
Under various temperature conditions”
+Tomoyuki Fujii, Keiichiro Tohgo,
Takahiro Omi, and Yoshinobu Shimamura
“A micromechanics model of particlereinforced composites with interfacial
phases”
+ Dai Okumura, Taiji Isomura, Nobutada
Ohno
“Effect of swelling-induced buckling and
creasing on pattern transformation of
polymeric membranes with a square lattice of
holes”
+ Tetsuya Matsuda, Keita Goto, Nobutada
Ohno, Yusuke Kawasaki, Shintaro
Miyashita
“Negative through-the-thickness poisson's
ratio of elastic-viscoplastic CFRP laminates”
* Nobutada Ohno, Hirotaka Sugiyama
“Thermomechanical cyclic plastic behavior
of 304ss at large temperatue ranges”
+ Ankit Srivastava and Alan
Needleman
“Damage and size dependence in
the creep life of single crystal
superalloys”
+ Ionut Prisacari, Rodrigue
Desmorat, Pierre Gaborit,
Martin Poncelet,Arnaud
Longuet, Alexandre Seror
“Experimental analysis and
modeling of the behavior of
INCO718DA”
* Fritz Appel and Roland Hoppe
“On the origin of internal stresses in
multiphase titanium aluminide alloys”
+ Laura Ahmels, Enrico Bruder
“A new approach to the mapping of
plastic flow”
+ Omar S. Es-Said
“The effects of hydrogen charging on
charpy impact of 4340 Steel”
* Dong-Yol Yang
“Innovation of flexible processing
of metals as ac ompetitive
manufacturing technology”
* 30
mins. key-note lect., + 15 mins. invited present. ** Chairs ++Symposium Organizer
18:00 …………………………BANQUET DINNER (Ballroom) includes Hawaian dances for
entertainment.
Saturday, January 9, 2016
Registration 8:00 AM-11:30 AM …..…………………………….…….….…….(Room: Hualalai)
SM-1 (8:30-11:00)
Creep, Deformation,
Texture, Nano and
Nuclear Materials IV (in
honor of K.L. Murty)
(Room: Mauna Loa)
SM-2 (8:30-11:00)
Metal Forming, Damage &
Fracture
(Room: Mauna Kea)
SM-3 (8:30-10:30)
Multi-faceted Research
in Materials and
Mechanics III ( in
honor Hüseyin
Sehitoglu)
(Room: Keauhou III)
SM-4 (8:30-10:45)
Develop. & App. of Consti. Desc.
for Plast. At Various Scales IV (in
Memory of José Grácio)
(Room: Keauhou IV)
** James C. Earthman &
Shenyang Hu
*Shenyang Hu, Yulan Li, …..
and David J Senor
“Application of mesoscale
phase-field approach in
modeling microstructure
evolution under elastic-plastic
deformation”
** Hadi Pirgazi & Rajiv Shivpuri
** Guocai Chai & Zhirui
Wang
* Zhirui Wang
“Experimental study of the
cyclic plasticity and fatigue
crack initiation of
polycrystalline cu under pure
compressive cyclic loading
conditions”
** G. Vincze (++) & Yannis P. Korkolis
+Lin Shao
“Development of radiation
tolerant metallic glasses”
+Celine Hin, Thomas
Danielson, and Eric Tea
“Ab initio investigation of he
bubbles at the Y2Ti2O7-Fe
interface in nanostructured
ferritic alloys”
+Chang-Sung Seok, Keontae
Park, et. al.
“Effect of plastic zone size on
elasto-plastic fracture toughness
in fracture resistance test
specimen”
+James C. Earthman
“Compatibility of high
temperature materials with
radioactive non-aqueous
coolants”
+Ankan Guria and Indrajit
Charit
“Dynamic strain aging in
accident-tolerant ferritic steels”
+ An-Chou Yeh, Yao-Jen
Chang , Te-Kang Tsao , et al.
“High temperature deformation
behaviours of precipitation
strengthened high entropy
alloys”
*B. Kombaiah and K.L. Murty
“Dislocation climb, precipitation
hardening and newtonian
viscous deformation mechanisms
of high temperature creep in an
nb-modified zircaloy”
* Rajiv Shivpuri, Krishna C. Bellidega,
Amanda Grow and R. Scott Hyde
“Mechanics and fracture of inclusions in hot
viscoplastic flow: application to deformation
processing”
+ František Šebek, Petr Kubík, Jindřich
Petruška
“Ductile fracture test
in negative stress triaxiality”
+Hadi Pirgazi, Tuan Nguyen Minh, and Leo
A.I. Kestens
“Rotation and fragmentation of orientations in
cold deformed aluminum”
+ B. Li
“Twinning with zero twinning
shear”
+ Atsushi Matsumoto, Shunsuke Sasaki,
Tatsuro Katsumura, Hiroki Ota
“Mathematical model of deformation
resistance
in hot rolling process on alloy steel”
+ Guocai Chai and Mikael
Grahk
“Deformation and damage
behaviors at twin and grain
boundary in alloy 690 material
during very high cycle fatigue”
+ Yiliang (Leon) Liao
“Thermal engineered laser
shock peening driven
nanostructures and their effects
on enhanced fatigue
performance”
* Huseyin Sehitoglu, Piyas
Chowdhury, Avinesh Ojha
“Multifaceted Research in
Plasticity”
+ Yuji Hashimoto , Takatoshi Okabe , et. al.
“Effect of hydroforming on formability and
residual stress of hollow members with vshaped cross section”
+Antti Kaijalainen, Vili Kesti, et. al.
“Microstructural investigation of strain
localization, void formation and fracture
mechanisms in ultrahigh-strength steel
bending”
+ Lluís Pérez Caro, S. Marth, et. al.
“Calibration of a damage and fracture model
for alloy 718”
+Jun Song, Xiao Zhou, Daniel Marchand
“Micromechanical origin of hydrogen
trapping at grain boundaries in FCC
transition metals”
+Fábio C. Castro, Edgar N.
Mamiya, José A. Araújo
“A multiaxial fatigue model
based on combined deviatoric
strain amplitudes”
+ Seong Jin Park; Yujin Seong; et. al.
“A yield criterion for single crystal copper
subjected to high strain rates for a
multiscale simulation”
+ Panos Efthymiadis, Christophe Pinna,
John R. Yates
“Crystal plasticity finite element modelling
of fatigue crack nucleation in AA2024”
+ Yannis P. Korkolis, Peter Ripley and
Paul Knysh
“Constitutive modeling and failure
predictions of SS-304L microtubes”
+Jiawei Fu, Frédéric Barlat, Jin-Hwan
Kim* Fabrice Pierron
“Applying the virtual fields method to the
identification of homogeneous anisotropic
hardening constitutive parameters”
+ Robert M. Allen , Laszlo S. Toth,
Mohammed Cherkaoui, et. al
“Slip-Twin Interactions at Interfaces in
Crystal Plasticity”
+Marilena C. Butuc, Gabriela Vincze
and Frederic Barlat
“Formability of twinning–induced plasticity
steels: experimental and theoretical study
on the use of a dislocation density based
constitutive model”
+ Rich Davies, Aashish Rohatgi, Piyush
Upadhyay Elizabeth Stephens, David
Catalini
“Formability of aluminum alloy sheet at
strain rates from quasistatic to 104/sec”
+ Jian Chen, Gaoqiang Chen, Xinghua
Yu, Zhili Feng and Paul Crooker
“Improved prediction of residual stresses in
dissimilar welds by newly developed
dynamic strain hardening constitutive
relation”
+ Saadi A. Habib, Akhtar S. Khan,
Thomas Gnäupel-Herold
“Mechanical response and texture
evolution of rare earth magnesium alloy
sheet, ZEK100, at different strain rates and
temperatures”
+Lu Feng
Electro-chemo-mechanisms in electrodes:
Theory and Experiments
Coffee/Tea
* 30
minutes key-note lecture, + 15 minutes invited presentation ** Chairs ++ Symposium Organizer
Tentative Menu for Served Multi-Courses Dinner on Jan. 3: Hawaiian Field Greens w/ assorted
dressing, Maui Onion & wild Mushroom with poke (local marinated raw Ahi tuna), Thai Chicken
Soup, mango sorbet, Kona Coffee Rack of Lamb & Island Catch (Opakapaka) topped with two Tiger
Prawns, Tropical Relish and Merlot essence. Chef’s selection of fresh seasonal vegetables and starch,
rolls and butter, Chocolate Macadamia Nut Torte w/ Berries & Island Fruit Coulis, regular and decaf
coffee and selection of teas, includes three glasses of wine (served dinner, with entertaining local
dancers and singers).
Tentative Menu for Served Multi-courses Dinner on Jan. 8 (banquet): Beet salad with large goat
cheese ball and mixed greens served with a grained mustard dressing, Kona Cold Clam Chowder (slow
cooked mostly shrimp and scallop with small quantity of potato), Coconut Sorbet, Lobster in garlicwine sauce and Red wine braised beef short rib, big island mushroom, leeks, port wine reduction with
basmati rice and spring vegetables, rolls and butter, Mango Pudding with strawberry pearl, dehydrated
pineapple and lavender salt, regular and decaf coffee and selection of teas, includes three glasses of
wine (served dinner, with entertaining Hawaian dances).
Participants List, Plasticity 16, Sheraton, Kona, Hawaii, January 3-8, 2016.
Niaz Abdolrahim (Massachusetts Institute of Technology, USA), Armin Abedini (University of Waterloo,
Canada), Francis Adzima (Arts et Métiers ParisTech, France), Sean Agnew (University of Virginia, USA),
Vinicius Aguiar de Souza (Tohoku University, Japan), Laura Ahmels (TU Darmstadt, Germany), Talal AlSamman (RWTH Aachen University, Germany), Robert Allen (Mississippi State University, USA), Holm
Altenbach (Otto-von-Guericke-University Magdeburg, Germany), Florence Andrieux (Fraunhofer Institute for
Mechanics of Materials, Germany), Antonia Antoniou (Georgia Institute of Technology, USA), Yoshiteru
Aoyagi (Tohoku University, Japan), Fritz Appel (Helmholtz-Zentrum Geesthacht, Germany), HesamAskari
(Massachusetts Institute of Technology, USA), Mohsen Asle Zaeem (Missouri University of Science and
Technology, USA), Andrea Bachmaier (Saarland University, Germany), James Baker (University of
Manchester, UK), Roberto Ballarini (University of Houston, USA), Doug Bamman (Mississippi State
University, USA), Thomas Barker (University of Manchester, UK), Frederic Barlat (Pohang University of
Science and Technology, Korea), Christopher Barrett (Mississippi State University, USA), Nabil Bassim
(University of Manitoba, Canada), Corbett Battaile (Sandia National Laboratories, USA), Nathan Bechle (The
University of Texas-Austin, USA), Allison Beese (Pennsylvania State University, USA), James Belak
(Lawrence Livermore National Laboratory, USA), Victor Berdichevsky (Wayne State University, USA), Irene
Beyerlein (Los Alamos National Laboratory, USA), Dhriti Bhattacharyya (Australian Nuclear Science and
Technology Organization, Australia), Vishnu Bhattacharyya (University of Virginia, USA), Thomas Bieler
(Michigan State University, USA), Nick Bierwisch (Saxonian Institute of Surface Mechanics SIO, Germany),
Eduardo Bittencourt (Federal University of Rio Grande do Sul, Brazil), Wlodzimierz Bochniak (AGH
University of Science and Technology, Poland), Cyril Bolis (CEA, France), Valery Borovikov (Ames
Laboratory, USA), Brad Boyce (Sandia National Laboratories, USA), Paulo Branicio (Institute of High
Performance Computing, Singapore), Steph Bredenhann (South African National Roads Agency , South
Africa), Curt Bronkhorst (Los Alamos National Laboratory, USA), Esteban Busso (National Aerospace
Research Centre, France), Olga Bylya (University of Strathclyde, UK), Daniel Caillard (CEMES-CNRS,
France), Georges Cailletaud (MINES ParisTech, France), Thomas Canfield (Los Alamos National Laboratory,
USA), Jian Cao (Northwestern University, USA), Gustavo Capilla González (Hiroshima University, Japan),
Laurent Capolungo (Georgia Institute of Technology, USA), Jay Carroll (Sandia National Laboratories, USA),
Gustavo Castelluccio (Sandia National Laboratories, USA), Fabio Castro (University of Brasilia, Brazil),
Emeric Plancher (Arts & Métiers ParisTech, France), Ellen Cerreta (Los Alamos National Laboratory, USA),
Jean-Louis Chaboche (ONERA, France), Guocai Chai (Sandvik Materials Technology, Sweden), Indrajit Charit
(University of Idaho, USA), Fuh-Kuo Chen (National Taiwan University, Taiwan), Jian Chen (Oak Ridge
National Laboratory, USA), Jian-Kang Chen (Ningbo University, China), Shaohua Chen (Chinese Academy of
Sciences, China), Wayne Chen (Purdue University, USA), Xu Chen (Tianjin University, China), Puikei Cheng
(Northwestern University, USA), Andrej Cherkaev (University of Utah, USA), Elena Cherkaev (University of
Utah, USA), Shi-Hoon Choi (Sunchon National University, Korea), Haijian Chu (Shanghai University, China),
Robert Chulist (Polish Academy of Sciences, Poland), James Ciulik (Laser Welding Solutions, USA), Amy
Clarke (Los Alamos National Laboratory, USA), Sanda Cleja-Tigoiu (University of Bucharest, Romania),
Stefano Coratella (Wright State Research Institute, USA), Michel Coret (École Centrale de Nantes, France),
Jonathan Cormier (Université de Poitiers, France), Florent Coudon (MINES ParisTech, France), Michael Cox
(AWE, UK), Joao Quinta da Fonseca (University of Manchester, UK), Lanhong Dai (Chinese Academy of
Sciences, China), Richard Davies (Pacific Northwest National Laboratory, USA), Mark Daymond (Queen’s
University, Canada), Michael Demkowicz (Massachusetts Institute of Technology, USA), Shen Dillon
(University Illinois at Urbana-Champaign, USA), IssamDoghri (UniversitéCatholique de Louvain, Belgium),
Jie Dong (Shanghai Jiao Tong University, China), HuilingDuan (Peking University, China), Indranath Dutta
(Washington State University, USA), James Earthman (University of California, Irvine, USA), David Eastman
(JHU, USA), Panos Efthymiadis (University of Warwick, UK), Itai Einav (University of Sydney, Australia),
Khalil El Khodary (The American University in Cairo, Egypt), Osman El-Atwani (Drexel University, USA),
Heike Emmerich (University of Bayreuth, Germany), Bernard Ennis (Tata Steel, Netherlands), Elif Ertekin
(University of Illinois at Urbana-Champaign, USA), Mohsen Eshraghi (California State University, USA),
Omar Es-said (Loyola Marymount University, USA), Feifei Fan (University of Nevada, USA), Tongxiang Fan
(Shanghai Jiao Tong University, China), Yue Fan (Oak Ridge National Laboratory, USA), Behzad Fatahi
(University of Technology Sydney, Australia), Sergio Felicelli (University of Akron, USA), Miaolin Feng
(Shanghai Jiao Tong University, China), Saryu Fensin (Los Alamos National Laboratory, USA), Eliot Fried
(Okinawa Institute of Science and Technology Graduate University, Japan), Jiawei Fu (Pohang University of
Science and Technology, Korea), Mingwang Fu (Hong Kong Polytechnic University, HK China), Gerhard
Fuchs (University of Florida, USA), Tomoyuki Fujii (Shizuoka University, Japan), David Fullwood (Brigham
Young University, USA), Gabriela Vincze (University of Aveiro, Portugal), Hamid Garmenstani (Georgia
Institute of Technology, USA), Celine Gerard (ISAE-ENSMA, France), William Gerberich (University of
Minnesota, USA), Timothy Germann (Los Alamos National Laboratory, USA), Nasr Ghoniem (University of
California, Los Angeles, USA), Somnath Ghosh (Johns Hopkins University, USA), Joe Goddard (University of
California, San Diego, USA), Anthony Gravouil (INSA-Lyon, France), Nico Gray (University of Manchester,
UK), Francois Guillard (University of Sydney, Australia), Jing Guo (Northwestern Polytechnical University,
China), Yafang Guo (Beijing Jiaotong University, China), Nilesh Gurao (Indian Institute of Technology,
Kanpur, India), Husam Gurol (General Atomics, USA), Beñat Gurrutxaga-Lerma (Imperial College London,
UK), Jinjin Ha (Pohang University of Science and Technology, Korea), Christian Haase (RWTH Aachen
University, Germany), Saadi Habib (UMBC, USA), Klaus Hackl (Ruhr University Bochum, Germany),
Hiroyuki Hagiwara (Osaka City University, Japan), Thorsten Halle (Otto-von-Guericke-Univerity Magdeburg,
Germany), James Hammerberg (Los Alamos National Laboratory, USA), Heung Nam Han (Seoul National
University, Korea), Soo Sik Han (Kumoh National Institute of Technology, Korea), Tiansi Han (Chinese
Academy of Sciences, China), Youssef Hashash (University of Illinois at Urbana-Champaign, USA), Tasnim
Hassan (North Carolina State University, USA), Yuji Hashimoto (JFE Steel Corp., Japan), Takahiro Hatano
(University of Tokyo, Japan), Tarek Hatem (The British University in Egypt, Egypt), Khalid Hattar (Sandia
National Laboratories, USA), Hisao Hayakawa (Kyoto University, Japan), Christian Hellmich (TU Wien,
Austria), Celine Hin (Virginia Polytechnic Institute and State University, USA), Bjorn Holmedal (Norwegian
University of Science and Technology, Norway), Sung-Tae Hong (University of Ulsan, Korea), Pavel Hora
(ETH Zurich, Switzerland), Mark Horstemeyer (Mississippi State University, USA), Atsushi Hosoi (Waseda
University, Japan), Shenyang Hu (Pacific Northwest National Laboratory, USA), E-Wen Huang (National
Chiao Tung University, Taiwan), Ping Huang (Xian Jiaotong University, China), Yongjiang Huang (Harbin
Institute of Technology, China), Hoon Huh (KAIST, Korea), Joern Ihlemann (Chemnitz University of
Technology, Germany), Shoji Imatani (Kyoto University, Japan), Kaan Inal (University of Waterloo, Canada),
Takeshi Iwamoto (Hiroshima University, Japan), Dongchan Jang (KAIST, Korea), Lade Jayahari (GRIET,
India), James Jenkins (Cornell University, USA), Cho-Pei Jiang (National Formosa University, Taiwan), Han
Jiang (Southwest Jiaotong University, China), Shuyong Jiang (Harbin Engineering University, China), Yanyao
Jiang (University of Nevada, USA), Hai-Jun Jin (Chinese Academy of Sciences, China), Duane Johnson (Ames
Laboratory, USA), Guensu Joo (KAIST, Korea), Daniel Juhre (Deutsches Institut für Kautschuk technologiee,
Germany), Antti Kaijalainen (University of Oulu, Finland), Kenneth Kamrin (Massachusetts Institute of
Technology, USA), Beomsoo Kang (Pusan National University, Korea), Guozheng Kang (Southwest Jiaotong
University, China), Djamel Kaoumi (University of South Carolina, USA), Ibrahim Karaman (Texas A&M
University, USA), Leif Kari (KTH Royal Institute of Technology, Sweden), Michael Kassner (University of
Southern California, USA), Dinesh Katti (North Dakota State University, USA), Kalpana Katti (North Dakota
State University, USA), Leo Kestens (Ghent University, Belgium), Christopher Key (Applied Physical Sciences
Corp, USA), Akhtar Khan (UMBC, USA), Dong-Kyu Kim (Korea Atomic Energy Institute, Korea), Heon
Young Kim (Kangwon National University, Korea), Ji Hoon Kim (Pusan National University, Korea), Minki
Kim (KAIST, Korea), Yusuke Kinoshita (Nagoya University, Japan), Marko Knezevic (University of New
Hampshire, USA), Johannes Knust (IPH Hannover gGmbH, Germany), Dennis Kochmann (California Institute
of Technology, USA), Antonios Kontsos (Drexel University, USA), Antti Korhonen (Aalto University of
Science and Technology, Finland), Seid Koric (University of Illinois, USA), Yannis Korkolis (University of
New Hampshire, USA), Katarzyna Kowalczyk-Gajewska (Polish Academy of Sciences, Poland), Zbigniew
Kowalewski (Institute of Fundamental Technological Research, Poland), Motomichi Koyama (Kyushu
University, Japan), Martin Kroon (Malmö University, Sweden), Manja Krueger (Otto-von-Guericke-Univerity
Magdeburg, Germany), Leopold Kruszka (Military University of Technology, Poland), Angela Ku (UMBC,
USA), Petr Kubik (Brno University of Technology, Czech Republic), Masahiro Kubo (Nippon Steel and
Sumitomo Metal Corp, Japan), Masakazu Kudo (Asahi Kasei Corporation, Japan), Toshihiko Kuwabara (Tokyo
University of Agriculture and Technology, Japan), Stelios Kyriakides (The University of Texas-Austin, USA),
Jeffrey Kysar (Columbia University, USA), Leslie Lamberson (Drexel University, USA), Bennett Larson (Oak
Ridge National Laboratory, USA), Jean-Briac le Graverend (Texas A&M University, USA), Khanh Chau Le
(Ruhr University Bochum, Germany), Ricardo Lebensohn (Los Alamos National Laboratory, USA), Jeansébastien Lecomte (Université de Lorraine, France), Chin-Hyung Lee (Chung-Ang University, Korea), Chung
An Lee (Kangwon National University, Korea), Jeongyeon Lee (Korea University, Korea), Myoung-Gyu Lee
(Korea University, Korea), Todd Leonhardt (Rhenium Alloys Inc., USA), Julie Levesque (Laval University,
Canada), Valery Levitas (Iowa State University, USA), Bin Li (University of Nevada, USA), Dongfeng Li
(Harbin Institute of Technology, China), Guoqiang Li (Louisiana State University, USA), Heng Li
(Northwestern Polytechnical University, China), Hu Li (Harbin Engineering University, China), Nan Li (Los
Alamos National Laboratory, USA), Xiaowu Li (Northeastern University, China), Xiaoyan Li (Tsinghua
University, China), Jie Lian (RPI, USA), Lihong Liang (Chinese Academy of Sciences, China), Yiliang Liao
(University of Nevada, USA), Hojun Lim (Sandia National Laboratories, USA), Sung Jun Lim (KAIST, Korea),
Gu Lin (Chinese Academy of Sciences, China), Hua Lin (Wuhan University of Technology, China), Jianping
Lin (Tongji University, China), Ying Liu (Nanjing University of Science and Technology, China), Klaus-Dieter
Liss (Australian Nuclear Science and Technology Organisation, Australia), David Littlefield (University of
Alabama at Birmingham, USA), Bin Liu (Tsinghua University, China), Bing Liu (Lawrence Livermore
National Laboratory, USA), Mario Liu (UniversitätTübingen, Germany), Zhanli Liu (Tsinghua University,
China), Zishun Liu (Xi’an Jiaotong University, China), Gang Lu (California State University Northridge, USA),
Baifeng Luan (Chongqing University, China), Stefan Luding (University of Twente, Netherland), Jianjun Ma
(Wenzhou University, China), Robert Maass (University of Illinois at Urbana-Champaign, USA), Stuart Maloy
(Los Alamos National Laboratory, USA), Niko Manopulo (ETH Zurich, Switzerland), Weimin Mao (University
of Science and Technology Beijing, China), Nathan Mara (Los Alamos National Laboratory, USA), Lorena
Mataveli Suave (Université de Poitiers , France), Suveen Mathaudhu (University of California, USA), Kristian
Mathis (Charles University, Czech Republic), Tetsuya Matsuda (University of Tsukuba, Japan), Atsushi
Matsumoto (JFE Steel Corp., Japan), Jason Mayeur (Los Alamos National Laboratory, USA), David Mcdowell
(Georgia Institute of Technology, USA), Jim Mcelwaine (University of Durham, UK), Hector Medina (UMBC,
USA), Douglas Medlin (Sandia National Laboratories, USA), Chenlu Meng (RWTH Aachen , Germany),
Michael Miles (Brigham Young University, USA), Junying Min (Ruhr-Universität Bochum, Germany), Raja
Mishra (GM Research and Development Center, USA), Rajiv Mishra (University of North Texas, USA), Sushil
Mishra (IIT Bombay, India), Magdalena Miszczyk (Polish Academy of Sciences, Poland), Hiromi Miura
(Toyohashi University of Technology, Japan), Dirk Mohr (ETH Zurich, Switzerland), Konstantin Molodov
(RWTH Aachen University, Germany), Neville Moody (Sandia National Laboratories, USA), Takahiro Mori
(Tokyo University of Agriculture and Technology, Japan), Christian Motz (Saarland University, Germany),
Hashem Mourad (Los Alamos National Laboratory, USA), Amiya Mukherjee (University of California, Davis,
USA), Peter Mullner (Boise State University, USA), Mayu Muramatsu (Tohoku University, Japan),
KorukondaMurty (North Carolina State University, USA), Kensuke Nagai (Nippon Steel and Sumitomo Metal
Corp, Japan), Teruo Nakai (Geo-Research Institute, Japan), Randy Nanstad (Oak Ridge National Laboratory,
USA), Tomas Navrat (Brno University of Technology, Czech Republic), Richard Neu (Georgia Institute of
Technology, USA), Alfonso Ngan (University of Hong Kong, HK China), Jeffrey Nguyen (Lawrence
Livermore National Laboratory, USA), Jian Feng Nie (Monash University, Australia), Thomas Niendorf
(Institut für Werkstoff technik, Germany), Stephen Niezgoda (Ohio State University, USA), Christian Niordson
(Technical University of Denmark, Denmark), Sasan Nouranian (University of Mississippi, USA), Eva-Lis
Odenberger (Industrial Development Centre in Olofström, Sweden), Takahito Ohmura (National Institute for
Materials Science , Japan), Nobutada Ohno (Nagoya University, Japan), Hiroshi Okada (Tokyo University of
Science, Japan), Dai Okumura (Nagoya University, Japan), Yuki Onishi (Tokyo Institute of Technology,
Japan), Yusuke Onuki (Ibaraki University, Japan), Shingo Ozaki (Yokohama National University, Japan),
Keunhwan Pack (Massachusetts Institute of Technology, USA), Anantha Padmanabhan (Tata Consultancy
Services, India), Victor Panin (Institute of Strength Physics and Materials Science SB RAS, Russia), Stefanos
Papanikolaou (Johns Hopkins University, USA), Namsu Park (KAIST, Korea), SeongJin Park (POSTECH,
Korea), Henryk Paul (Polish Academy of Sciences, Poland), Xianghe Peng (Chongqing University, China),
Lluis Perez Caro (IUC Olofström, Sweden), Keith Pilkey (Queen’s University, Canada), Christophe Pinna
(University of Sheffield, UK), Francisco Andrade Pires (University of Porto, Portugal), Hadi Pirgazi (Ghent
University, Belgium), Giacomo Po (University of California, Los Angeles, USA), Reeju Pokharel (Los Alamos
National Laboratory, USA), Ionut Prisacari (Université Paris Saclay , France), Gwenaelle Proust (University of
Sydney, Australia), Shaoxing Qu (Zhejiang University, China), Catherine Rae (University of Cambridge, UK),
Krishnaswamy Ravi-Chandar (University of Texas at Austin, USA), Klaus Regenauer-Lieb (UNSW Australia,
Australia), Huaqing Ren (Northwestern University, USA), Johannes Richter (IPH Hannover gGmbH,
Germany), Tim Ricken (University of Dortmund, Germany), Isamu Riku (Osaka Prefecture University, Japan),
Anthony Rollett (Carnegie Mellon University, USA), Franz Roters (Max-Planck-InstitutfürEisenforschung,
Germany), Thomas Rousseau (Ecole Centrale de Lyon, France), Artur Rozanski (Polish Academy of Sciences,
Poland), Timothy Rupert (University of California, Irvine, USA), Shigeo Saimoto (Queen’s University,
Canada), Indradev Samajdar (IIT Bombay, India), Stefan Sandfeld (University Erlangen-Nuremberg,
Germany), William Scherzinger (Sandia National Laboratories, USA), Daniel Schneider (Karlsruhe Institute of
Technology , Germany), Christopher Schuh (Massachusetts Institute of Technology, USA), Shane Schumacher
(Sandia National Laboratories, USA), Ruth Schwaiger (Karlsruhe Institute of Technology, Germany), Daniel
Schwen (Idaho National Laboratory, USA), František Šebek (Brno University of Technology, Czech Republic),
Huseyin Sehitoglu (University of Illinois, USA), Chang Sung Seok (Sungkyunkwan University, Korea), Maxim
Serebreni (UMBC, USA), Fulin Shang (Xi’an Jiaotong University, China), Jianfu Shao (University of Lille,
France), Lin Shao (Texas A&M University, USA), Mohamed Shehata (The British University in Cairo, Egypt),
Yao Shen (Shanghai Jiao Tong University, China), Yoshinobu Shimamura (Shizuoka University, Japan), Rajiv
Shivpuri (Ohio State University, USA), Dieter Siegele (Fraunhofer Institute for Mechanics of Materials,
Germany), Christian Silbermann (Technische Universität Chemnitz, Germany), Werner Skrotzki (Dresden
University of Technology, Germany), Jacob Smith (Northwestern University, USA), Timothy Smith (Ohio
State University, USA), Darrell Socie (University of Illinois at Urbana-Champaign, USA), Jun Song (McGill
University, Canada), Zhenfei Song (China Academy of Engineering Physics, China), Ankit Srivastava (Texas
A&M University , USA), Andreas Stark (Helmholtz-ZentrumGeesthacht, Germany), Alexander Staroselsky
(United Technologies Research Center, USA), Douglas Stauffer (Hysitron, Inc. , USA), Aaron Stebner
(Colorado School of Mines, USA), Thomas Stoughton (GM Research and Development Center, USA),
Chaoyang Sun (University of Science and Technology Beijing, China), Cheng Sun (Los Alamos National
Laboratory, USA), Waiching Sun (Columbia University, USA), Satyam Suwas (Indian Institute of Science,
India), Bob Svendsen (RWTH Aachen University, Germany), Yuichi Tadano (University of California, San
Diego, USA), Lakhdar Taleb (NSA de Rouen, France), Hiro Tanaka (Osaka University, Japan), Thomas
Tancogne-Dejean (MIT, USA), Shan Tang (Chongqing University, China), Xiaozhi Tang (Beijing Jiaotong
University, China), Hisashi Tanie (Hitachi, Ltd., Japan), Kenjiro Terada (Tohoku University, Japan), Theo
Tervoort (ETH Zürich, Switzerland), Damien Texier (University of Toulouse, Canada), Carl Thompson
(Massachusetts Institute of Technology, USA), Anthony Thornton (University of Twente, Netherland), Katsuyo
Thornton (University of Michigan, USA), Vikas Tomar (Purdue University, USA), Carlos Tome (Los Alamos
National Laboratory, USA), Laszlo Toth (Lorraine University, France), Jason Trelewicz (Stony Brook
University, USA), Zuzanka Trojanova (Charles University in Prague, Czech Republic), Blas Uberuaga (Los
Alamos National Laboratory, USA), Makoto Uchida (Osaka City University, Japan), Tamas Ungar (Eötvös
University Budapest, Hungary), Paul Van Houtte (KU Leuven, Belgium), Priya Vashishta (University of
Southern California, USA), Vincent Velay (Université de Toulouse, France), Manolis Veveakis (UNSW
Australia, Australia), Gabriela Vincze (University of Aveiro, Portugal), Sven Vogel (Los Alamos National
Laboratory, USA), Peter Voorhees (Northwestern University, USA), Richard Wan (University of Calgary,
Canada), Fei Wang (Xian Jiaotong University, China), Jian Wang (University of Nebraska, USA), Yanbin
Wang (University of Chicago, USA), Zhirui Wang (University of Toronto, Canada), Gary Was (University of
Michigan, USA), Ikumu Watanabe (National Institute for Materials Science, Japan), Yueguang Wei (Chinese
Academy of Sciences, China), Kerstin Weinberg (Siegen University, Germany), Thomas Weinhart (University
of Twente, Netherland), Janelle Wharry (Boise State University, USA), Lennart Wiessner (Technische
Universität Darmstadt, Germany), Justin Wilkerson (University of Texas at San Antonio, USA), Simon
Wohletz (Technische Universität Darmstadt, Germany), De Long Wu (East China University of Science and
Technology, China), Peidong Wu (McMaster University, Canada), Yunping Xi (University of Colorado, USA),
Qin Xiang Xia (South China University of Technology, China), Zihui Xia (University of Alberta, Canada),
Yang Xiang (Hong Kong University of Science and Technology, HK China), Liming Xiong (Iowa State
University, USA), Fu-Zhen Xuan (East China University of Science and Technology, China), Dong-Yol Yang
(Korea Advanced Institute of Science and Technology, Korea), Ping Yang (University of Science and
Technology Beijing, China), Arash Yavari (Georgia Institute of Technology, USA), An-Chou Yeh (National
Tsing Hua University, Taiwan), Jeong-Whan Yoon (Deakin University, Australia), Fusahito Yoshida
(Hiroshima University, Japan), Kengo Yoshida (Shizuoka University, Japan), Takamasa Yoshikawa (Mie
University, Japan), Hai-Yan Yu (Tongji University, China), Xiaobo Yu (Defence Science and Technology
Group , Australia ), Xinghua Yu (Oak Ridge National Laboratory, China), Motohiro Yuasa (National Institute
of Advanced Industrial Science and Technology, Japan), Hussein Zbib (Washington State University, USA),
Duan Zhang (Los Alamos National Laboratory, USA), Jinyu Zhang (Xi’an Jiaotong University, China), Ke-Shi
Zhang (Guangxi University, China), Liang Zhang (University of Wollongong, Australia), Qingsheng Zhang
(Granges Aluminum (Shanghai) Co., Ltd, China), Shang-Lin Zhang (East China University of Science and
Technology, China), Zhefeng Zhang (Chinese Academy of Sciences, China), Zixuan Zhang (Northwestern
University, USA), Jidong Zhao (Hong Kong University of Science and Technology, HK China), Zheng Zhong
(Tongji University, China), Qizhi Zhu (Hohai University, China), Yilin Zhu (Southwest Jiaotong University,
China)