Specifications SERIE TIGULLIO POLES Palo (insert number) TP branded Tagliafico Lighting - ready for the installation of capital with threaded nut ¾ "gaz at the top of the pile of armor brought mount ø28 TP. whose structure is built using stem longitudinally welded steel pipes FE360 induction, with diameters and mechanical properties according to UNI 7091. The trunks of pipe are joined together stampings and welded at the cross-tapering. These welds are performed using procedures approved by RINA according to ANSI / AWS D1.1 by companies equipped with the authorization issued by that entity. The welds are then scordonate in a workmanlike manner, to give a smooth surface to the pole. The tapering end is trimmed with rings made of cast aluminum art as is the base, inserted in the stem before his installation, running on the ground has function - as well as aesthetic - coverage of the collar and on the plinth of concrete ' Any closer to the stem of floor tiles made with self-locking. For connection to the pole line is equipped with a terminal branch, printed self-extinguishing polyamide resin, seated in the slot inspection, protected by a lid made of die-cast aluminum IP54 lockable. The terminal is equipped with a fused disconnect. 132x38mm slotted mast ø90 - pin terminal block 2x10mm2 class II 500V - IP23 Palo ø114 186x45mm slotted terminal block connector 4x16mm2 Class II 500V - IP23 It 'a bolt for the present any ground in case of installation of lighting in Class I. Treatment of iron pipes and steel structures - Degreasing in alkaline and acidic pickling solutions - Hot dip galvanized in a bath of molten zinc, according to CEI 7-6; UNI 5744/66. The deburring aluminum castings after the drilling and tapping are sandblasted steel grit blasting SA 2 ½, followed by passivation treatment with Alodine 1200, conforms to MIL C-5541 for improved corrosion resistance and adhesion of the optimization paint on the passivated parts. ============================== Description of processes - CYCLE: Dry-accurate surface, sanding "smearing" hot dip galvanizing. the end-application epossipolliammidico bicomponent Intergard EGA 088 - 089 of EGA International Paint, dry film thickness 45 microns. -application of two-component polyurethane enamel-modified acrylic, type 2 K Crilat FM, Italy Beige, dry film thickness 45 micr. => Ferromicaceo. ============================== Description of processes - CYCLE B: -Cleaning and sanding and filling where necessary. the end-application epossipolliammidico bicomponent Intergard 088 EGA - EGA 089 of the International Paint, dry film thickness 45 microns. -application of two-component polyurethane enamel-modified acrylic, type 2 K Crilat FM, Italy Beige, dry film thickness 45 micr. => Ferromicaceo. Both products are applied in two-component mixing and automatic electrostatic and procedure. This method of coating provides excellent protection against aging, salt and natural weathering. Versions Available: Codice/Code I210TP I211TP I212TP I213TP I214TP I215TP I216TP Descrizione/Description TIGULLIO TP POLE TP 3200 ø114/90 TIGULLIO TP POLE TP 3550 ø114/90 TIGULLIO TP POLE TP 4000 ø114/90 TIGULLIO TP POLE TP 4500 ø114/90 TIGULLIO TP POLE TP 3000 ø90 TIGULLIO TP POLE TP 3500 ø90 TIGULLIO TP POLE TP 4000 ø90 Altezza/Height 3200 Serie/Series TIGULLIO 3600 TIGULLIO 4000 TIGULLIO 4500 TIGULLIO 3000 TIGULLIO 3500 TIGULLIO 4000 TIGULLIO Posa/.... Armatura a Testapalo Armatura a Testapalo Armatura a Testapalo Armatura a Testapalo Armatura a Testapalo Armatura a Testapalo Armatura a Testapalo Montaggio Ghiera ¾ Interramento/.... 400 Ghiera ¾ 400 Ghiera ¾ 480 Ghiera ¾ 480 Ghiera ¾ 400 Ghiera ¾ 400 Ghiera ¾ 480 I217TP I218TP I219TP TIGULLIO TP POLE TP 2500 ø76 TIGULLIO TP POLE TP 3000 TIGULLIO TP POLE TP 5400 ø114/90 2500 TIGULLIO 3000 TIGULLIO 5400 TIGULLIO Armatura a Testapalo Armatura a Testapalo Armatura a Testapalo Ghiera ¾ 300 Ghiera ¾ 300 Ghiera ¾ 580