1
Directorate General of Foreign Trade
Ministry of Commerce & Industry
Udyog Bhawan, New Delhi
DES-VII
MINUTES OF NORMS COMMITTEE (NC-7) OF ‘PLASTIC & RUBBER
PRODUCTS’ MEETING NO. 40/08 HELD ON 13.02.2008 UNDER CHAIRMANSHIP
OF DR. SHYAM AGARWAL, ADGFT
Meeting No. 40/87-NC7/2007 of NORMS COMMITTEE (NC-7) dealing with ‘Plastic
& Rubber Products’ was held on 13.02.2008 under Chairmanship of Dr. Shyam Agarwal,
ADGFT, DGFT, Udyog Bhawan, New Delhi-110011. Following officials attended:
1)
2)
3)
4)
Shri G. Seetharam Reddy, Joint DGFT
Shri Ishwar Singh, Dy. DGFT and Convener
Shri A.K. Agarwal, Deputy Industrial Advisor, D/o C&PC
Shri A.K. Ojha, Assistant Director (Chemicals), M/o MS&ME
2. Committee confirmed minutes of NC Meetings No. 39/08 held on 06.02.2008.
3.1 Committee, after deliberations, approved following cases and RLA concerned shall
take consequential action as per Foreign Trade Policy/Procedures. Although ITC (HS) Codes
indicated in some cases were not pertaining to Chapters 39, and 40 of ITC (HS) Classification,
yet Committee considered such cases because these belonged to ‘Plastic & Rubber Products’
category.
MANUAL CASES
3.1.1
Case No. A-526
NC No.: 40/08
Dated:13.02.2008
DSM
ENGINEERING
PLASTICS INDIA
PVT. LTD.
Adv. Lic. No.
3110030854
Dated 20.09.2007
HQ F. No.
01/87/050/464/AM08/DES-VII
Status:
Approved
RLA F. No.
31/24/040/203/AM08
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
1.
Akulon K24 G6 Black (30% Glass Fiber Reinforced PA6
(Nylon 6) Compound
2.
Akulon N24 G3 Black (15% Glass Fiber Reinforced PA6
(Nylon 6) Compound
3.
Akulon S223 G6 Black (30% Glass Fiber Reinforced PA66
(Nylon 66) Compound
Sl.No.
IMPORT ITEM
1.
Nylon 6 Chips / Granules Base Polymer
Qty
4000.000 kg
6000.000 kg
3000.000 kg
Qty
2810.000 kg
2
2.
3.
4.
5.
6.
7.
8.
9
10
11
12
Glass Fiber (Chopped Strand) Reinforcing Agent
Black Masterbatch PE 48/93 Relevant Colourant
Calcium Stearate Mould Releasing Agent
Nylon 6 Chips / Granules Base Polymer
Glass Fiber (Chopped Strand) Reinforcing Agent
Black Masterbatch PE 48/93 Relevant Colourant
Calcium Stearate Molud Releasing Agent
Nylon 66 Chips / Granules Base Polymer
Glass Fiber (Chopped Strand) Reinforcing Agent
Black Masterbatch PE 48/93 Relevant Colourant
Calcium Stearate Mould Releasing Agent
1236.000 kg
62.000 kg
12.400 kg
5008.270 kg
927.000 kg
123.600 kg
121.130 kg
2094.900 kg
927.000 kg
61.800 kg
6.300 kg
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
Akulon –K224 G6/N 24 G6
1 kg
30% Glass Fiber Reinforced,
PA6 (Nylon 6) Compound
Akulon – N24 G3/K 224 G3
1 kg
15% Glass Fiber Reinforced,
PA6 (Nylon 6) Compound
Akulon –S 223 G6
1 kg
30% Glass Fiber Reinforced,
Polyamide 66 (Nylon 66)
Compound
3.1.2
IMPORT ITEM
1. Polyamide 6/Nylon 6
Chips/Granules
2. Glass Fiber
3. Relevant Colourant
(Pigments/Masterbatch)
4. Mould Release Agent
(Calcium Stearate)
1. Polyamide 6/Nylon 6
Chips/Granules
2. Glass Fiber
3. Relevant Colourant
(Pigments/Masterbatch)
4. Mould Release Agent
(Calcium Stearate)
1. Polyamide 66/Nylon 6
Chips/Granules
2. Glass Fiber
3. Relevant Colourant
(Pigments/Masterbatch)
4. Mould Release Agent
(Calcium Stearate)
Case No. A-527
S.P. SINHA & CO.
NC No.: 40/08
Dated:13.02.2008
Adv. Lic. No.
0210104078
Dated 18.09.2007
QTY
0.70250 kg
0.30900 kg
0.01550 kg
0.00310 kg
0.83470 kg
0.15450 kg
0.02060 kg
0.02020 kg
0.69830 kg
0.30900 kg
0.02060 kg
0.00210 kg
HQ F. No.
01/87/050/463/AM08/DES-VII
RLA F. No.
02/24/040/134/AM08
Status:
Approved
3
Application: Request is for adhoc norms for following:
Sl.No.
1.
2.
3.
4.
5.
6.
Sl.No.
1.
2.
3.
4.
5.
6.
7.
8.
EXPORT ITEM
PTFE Resin Based Liquid Material Grade-1
PTFE Resin Based Liquid Material Grade-2
Silicone Based Material Grade-2
Silicone Based Liquid Material Grade-3
Silicone Based Liquid Material Grade-4
Silicone Based Liquid Material Grade-5
IMPORT ITEM
Dyneon, TF 5035 R
Prepared Pingment, 4096
Dyneon, TF 5035 R
Prepared Pigment, 2460
Silikoftal HTL 3, Silicone Polyester Resin
Silikoftal HTL 3, Silicone Polyester Resin
Silikoftal HTL 3, Silicone Polyester Resin
Silikoftal HTL 3, Silicone Polyester Resin
Qty
900.000 kg
12.000 kg
300.000 kg
400.000 kg
300.000 kg
100.000 kg
Qty
183.600 kg
734.400 kg
1028.160 kg
183.600 kg
201.960 kg
257.400 kg
177.480 kg
45.900 kg
Decision: With D/o C&PC OM No. 46011/29/2004-PC.II dated 08.09.2006, following
adhoc norms are approved:
EXPORT ITEM
QT
Y
PTFE Dispersion Primer 1 kg
and High Temperature
Resistant
Coating
Material
3.1.3
Case No. A-529
NC No.: 40/08
Dated:13.02.2008
IMPORT ITEM
1. PTFE Dispersion
2. Prepared Pigment
3. Relevant Polyester
Resin
RUSHIL DÉCOR.
PVT. LTD.
Adv. Lic. No.
0810067812
Dated 15.10.2007
QTY
Net Content + 2% Wastage
Net Content + 2% Wastage
Net Content + 2% Wastage
HQ F. No.
01/87/050/468/AM08/DES-VII
RLA F. No.
08/24/040/178/AM08
Status:
Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
1.
Double side Decorative Laminated Sheets with barrier paper
Thickness: 1.6 mm Qty. 100000 Sheets, (1 Sq. Mtrs x 10 mm
Thickness of 14.5 kg +/- 2.5%)
2.
Double side Decorative Laminated Sheets with barrier paper
Qty
364000.000
Sq.Meter
5760.000
4
Thickness: 1.8 mm Qty. 1500 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
3.
Double side Decorative Laminated Sheets with barrier paper
Thickness: 1.8 mm Qty. 1500 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
4.
Double side Decorative Laminated Sheets with barrier paper
Thickness: 1.8 mm Qty. 500 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
Sl.No.
IMPORT ITEM
1.
Kraft Paper
2.
Base Paper
3.
Barrier Paper
4.
Tissue Paper
5.
Phenol
6.
Melamine
7.
Methanol
8.
B.O.P.P Film
Sq.Meter
5569.500
Sq.Meter
58.750 Sq.Meter
Qty
551652.000 kg
80333.000 kg
64566.000 kg
10135.000 kg
212220.000 kg
135890.000 kg
232116.000 kg
3753.000 kg
Decision: With copy of letter No. 01/87/50/00544/AM06/DES-VIII/3587 dated
10.02.2006 given by D/o C&PC, adhoc norms are approved as under
EXPORT ITEM
QTY
IMPORT ITEM
QTY
Double
Side 1 Sq.Mtr x 10.00 mm 1. Kraft Paper
9.15 kg
Decorative Laminates Thickness of 14.5 kg +/- 2. Base Paper
0.214 kg
with Barrier Paper
2.5%
3. Barrier Paper
0.172 kg
4. Tissue Paper
0.027 kg
5. Phenol
3.52 kg
6. Melamine
0.362 kg
7. Methanol
3.85 kg
8. B.O.P.P. Film
0.01 kg
Note: 1. The above norms are based on 10.00 mm thickness with average weight of 14.5
kg +/- 2.5% and are applicable on 1.6 mm to 20 mm thickness.
2. In case of variation in thickness/weight, the quantity of item of import viz.
Phenol, Para formaldehyde/Methanol and Kraft paper to be allowed may be
arrived at by adopting the following formula: AxB/C where A=Quantity allowed
for 10.00 mm thickness of weight.14.5 kg +/- 2.5%, B=The thickness or weight/
sq. Meter of decorative laminates proposed to be exported, and C = Either the
Standard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq.Meter of
10.00 mm thickness.
3. The quantity of other items viz. Base Paper, Barrier Paper, Tissue Paper,
Melamine and BOPP film will remain unchanged irrespective of thickness and
weight of decorative laminate to be exported.
4. Import of Base Paper will be restricted to 18% of FOB value of export, only for
the export product below 2.5 mm Thickness.
5
3.1.4
Case No. A-530
NC No.: 40/08
Dated:13.02.2008
RUSHIL DÉCOR.
PVT. LTD.
Adv. Lic. No.
0810067810
Dated 15.10.2007
HQ F. No.
01/87/050/469/AM08/DES-VII
RLA F. No.
08/24/040/177/AM08
Status:
Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
1.
Double side Decorative Laminated Sheets with barrier paper
Thickness :1.6 mm Qty. 2825 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
2.
Double side Decorative Laminated Sheets with barrier paper
Thickness :1.7 mm Qty. 2700 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
3.
Double side Decorative Laminated Sheets with barrier paper
Thickness :1.8 mm Qty. 2550 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
4.
Double side Decorative Laminated Sheets with barrier paper
Thickness :2.0 mm Qty. 2300 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
5.
Double side Decorative Laminated Sheets with barrier paper
Thickness : 2.2 mm Qty. 2100 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
6.
Double side Decorative Laminated Sheets with barrier paper
Thickness : 2.3 mm Qty. 2000 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
7.
Double side Decorative Laminated Sheets with barrier paper
Thickness : 2.4 mm Qty. 1925 Sheets, (1 Sq. Mtrs x 10.00 mm
Thickness of 14.5 kg +/- 2.5%)
Sl.No.
IMPORT ITEM
1.
Kraft Paper
2.
Base Paper
3.
Barrier Paper
4.
Tissue Paper
5.
Phenol
6.
Melamine
7.
Methanol
8.
B.O.P.P Film
Qty
10283.000
Sq.Meter
9828.000
Sq.Meter
9282.000
Sq.Meter
8372.000
Sq.Meter
7644.000
Sq.Meter
7280.000
Sq.Meter
7007.000
Sq.Meter
Qty
107045.000 kg
12774.000 kg
10267.000 kg
1611.000 kg
41180.000 kg
21609.000 kg
45041.000 kg
596.000 kg
Decision: With copy of letter No. 01/87/50/00544/AM06/DES-VIII/3587 dated
10.02.2006 given by D/o C&PC, adhoc norms are approved as under
EXPORT ITEM
QTY
IMPORT ITEM
QTY
6
Double
Side 1 Sq.Mtr x 10.00 mm 1. Kraft Paper
9.15 kg
Decorative Laminates Thickness of 14.5 kg +/- 2. Base Paper
0.214 kg
with Barrier Paper
2.5%
3. Barrier Paper
0.172 kg
4. Tissue Paper
0.027 kg
5. Phenol
3.52 kg
6. Melamine
0.362 kg
7. Methanol
3.85 kg
8. B.O.P.P. Film
0.01 kg
Note: 1. The above norms are based on 10.00 mm thickness with average weight of 14.5
kg +/- 2.5% and are applicable on 1.6 mm to 20 mm thickness.
2. In case of variation in thickness/weight, the quantity of item of import viz.
Phenol, Para formaldehyde/Methanol and Kraft paper to be allowed may be
arrived at by adopting the following formula: AxB/C where A=Quantity allowed
for 10.00 mm thickness of weight.14.5 kg +/- 2.5%, B=The thickness or weight/
sq. Meter of decorative laminates proposed to be exported, and C = Either the
Standard thickness of 10.00 mm or the Standard weight of 14.5 kg/Sq.Meter of
10.00 mm thickness.
3. The quantity of other items viz. Base Paper, Barrier Paper, Tissue Paper,
Melamine and BOPP film will remain unchanged irrespective of thickness and
weight of decorative laminate to be exported.
4. Import of Base Paper will be restricted to 18% of FOB value of export, only for
the export product below 2.5 mm Thickness.
3.1.5
Case No. A-531
NC No.: 40/08
Dated:13.02.2008
DURGA
PLASTICS
Adv. Lic. No.
0710052995
Dated 22.08.2007
HQ F. No.
01/87/050/331/AM08/DES-VII
RLA F. No.
07/24/040/368/AM08
Status:
Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
1.
Safety Guard for Machinery made out of Polyacetal Resin
compound Delrin 500P N C 010
Sl.No.
IMPORT ITEM
1.
Polyacetal Resin Compound Delrin 500P N C 010
Qty
61000.000 No.
Qty
9000.000 kg
Decision: With D/o C&PC OM No. 46011/130/2007-PC.II dated 05.02.2008, following
adhoc norms are approved:
EXPORT ITEM
QTY
Safety Guard for Machinery 1 No.
made of Polyacetal Resin
Compound
IMPORT ITEM
Polyacetal Resin
Compound
( Delrin 500 PN C010)
QTY
1.05kg/kg content in
the export product
7
3.1.6
Case No. A-532
NC No.: 40/08
Dated:13.02.2008
INTERNATIONAL
CONVEYORS
LTD.
Adv. Lic. No.
0310445425
Dated 08.10.2007
HQ F. No.
01/87/050/466/AM08/DES-VII
Status:
Approved
RLA F. No.
03/94/040/686/AM08
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
1.
PVC Solid Woven Fire Resistant Conveyor Belting (Type6000, 4 Ply, 1.5 X 1.5 mm Thk)
2.
PVC Solid Woven Fire Resistant Conveyor Belting (Type3500, 3 Ply, 1X 1 mm Thk)
3.
PVC Solid Woven Fire Resistant Conveyor Belting (Type4500, 4 Ply, 1.5 X 1.5 mm Thk)
Sl.No.
IMPORT ITEM
1
Polyester Filament (1000 Denier)
2
Spun Polyester Yarn
3
PVC Resin
4
Phosphate Plasticizer
5.
Pthalate Plasticizer
Qty
11758.300 Sq.
13487.000 Sq.
14833.400 Sq
Qty
125.885 MT
40.997 MT
142.172 MT
72.959 MT
30.906 MT
Decision: With D/o C&PC OM No. 46011/115/2005-PC.II dated 15.10.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
PVC Solid Woven 1 Sq. Mtr.
Fire
Resistant
Antistatic Conveyor
Belting for Mine
Applications (Belt
Type
3500/4500/6000)
3.1.7
Case No. A-535
IMPORT ITEM
1. Relevant Polyester Filament
Yarn (1000/1500D)/Spun
Polyester Yarn
2. Raw material for one kg of
PVC Compound content in
export product:
i) PVC Resin
ii) Phosphate Plasticizers
iii) Phthalate Plasticizers
3. Relevant Belt Fasteners
CHARANKATTU
COIR MFG CO.
PVT. LTD.
QTY
1.05 kg/kg
content in export
product
0.432 kg
0.223 kg
0.091 kg
Net to Net
HQ F. No.
01/85/050/191/AM07/DES-VII
Status:
Approved
8
NC No.: 40/08
Dated:13.02.2008
Adv. Lic. No.
1010025198
Dated 21.12.2006
RLA F. No. 10/81/040/41/AM07
Application: Request is for amendment in the description of export item so as to read as
‘Rubberised PVC Backed Coir Mats and mattings in various sizes’ in stead of ‘PVC
Backed Coir Mats and Mattings in various cut sizes’ already approved by NC in Meeting
No. 05/08 held on 09.05.2007 as under:
EXPORT ITEM: PVC Backed Coir Mats and Matting in various cut sizes ---- 1 Sq. Mtr.;
IMPORT ITEM: Relevant PVC Backed Coir Matting in Roll Form --------- 1.03 Sq. Mtr.;
Decision: The description of export item in minutes of NC in Meeting No. 05/08 dated
09.05.2007 (Case No. A-30) may be amended so as to read as under without any change
in wastage allowed:
EXPORT ITEM
QTY
Rubberised PVC Backed 1 Sq.Mtr.
Coir Mats and mattings
in various sizes
3.1.8
IMPORT ITEM
Relevant PVC Backed Coir
Matting in Roll Form
QTY
1.03 Sq.Mtr.
Case No. A-536
PODDAR
PIGMENTS LTD.
HQ F. No.
01/87/050/1544/AM06/DES-VII
NC No.: 40/08
Dated:13.02.2008
Adv. Lic. No.
1310021252
Dated: 29.03.2006
RLA F.No.13/24/040/29/AM06
Status:
Approved
Application: Request is for adhoc norms for following:
Sl.
No.
1
Sl.
No.
1
2
EXPORT ITEM
COLOUR MASTER BATCHES - NYLOCOL
BLACK 704
Net contents in Export Product are as under –
Relevant Polymer – Polymide Qty. 1750.00 Kgs.
Relevant Colour Pigment/Dyes – Carbon Black
Qty. 750.00 Kgs.
IMPORT ITEM
Relevant Polymer - Polymide
Relevant Colour Pigment/Dyes – Carbon Black
Qty
2500.000 KG
Qty
1802.500 KG
772.500 KG
9
Decision: With D/o C&PC OM No. 46011/27/2006-PC.II dated 08.03.2006, norms as
per existing SION entry at Sl. No. H58 are approved.
3.1.9
Case No. A-537
NC No.: 40/08
Dated:13.02.2008
HENKEL CAC
PVT. LTD.
Adv. Lic. No.
0310416380
Dated 18.01.2007
HQ F. No.
01/87/050/962/AM07/DES-VII
RLA F. No.
03/94/040/1066/AM07
Status:
Approved
Application: Request is for change in description of export product from ‘Polyurethane
Resin containing 100% Resin & Polyester Resin containing 100% Resin’ recorded in NC
minutes to ‘Prepared Adhesives Based on plastics (two component laminating
adhesives) Adhesive (Polyurethane resin containing 100% resin) and Additive
(Polyester Resin containing 100% Resin)’ as per their application and also to change
the description of import item as “Diphenyl Methane 4, 4 Di isocyanate’ instead of
Diphenyl Methane’.
Decision: With D/o C&PC OM No. 46011/11/2006-PC.II dated 11.02.2008, the
description of import item at Sl. No. (4) for export item ‘ Polyurethane Resin containing
100% Resin’ is modified as under in the minutes of NC Meeting No. 11/87-ALC1/2007
dated 20.06.2007 (Case No. 5/50/87-ALC1/2006):
EXPORT ITEM
QTY
Polyurethane
Resin 1 kg
containing 100% Resin
3.1.10
1.
2.
3.
4.
5.
IMPORT ITEM
Polypropylene Glycol
Castor Oil
Diethylene Glycol
Diphenyl Methane 4, 4 Di isocyanate
Toluene Di isocyanate
HIGH
TECHNOLOGY
PLASTICS
NC No.: 40/08
Adv. Lic. No.
Dated:13.02.2008 3110029035
Dated 23.4.2007
Case No. A-539
QTY
0.213 kg
0.225 kg
0.015 kg
0.348 kg
0.199 kg
HQ F. No.
01/87/050/110/AM08/DES-VII
Status:
Deferred
RLA F. No.
31/24/040/16/AM08
Application: Request is for adhoc norms for following:
Sl. No.
1
2
3
EXPORT ITEM
RC21 BOBBIN (XS 6U10303 AA)
RC28 BOBBIN (IS7U10B 303 AA)
BEARING SLEEVE (IS7U 10986AA)
Qty
180000 NUMBER
360000 NUMBER
540000 NUMBER
10
4
5
Sl. No.
1
2
3
RC21 CIRCUIT BOARD (XS6U 10B 301 AA)
RC28 CIRCUIT BOARD (IS7U 10B 301 AA)
IMPOR ITEM
NYLON 66- ZYTEL 3189 HSL NC 010
AMODEL AT 1116-HS COLOUR-BLACK
PPS MOULDING POWDER FORTRON 6165A4
NATURAL/BLACK
180000 NUMBER
360000 NUMBER
Qty
9265.320 KG
4093.740 KG
5324.400 KG
Decision: With D/o C&PC OM No. 46011/94/2003-PC.II dated 28.01.2008, case was
deferred for further discussion as under:
EXPORT ITEM
1. RC21 Bobbin (XS6U 10303 AA)
(Weight/piece 11.0gm+/-0.5gm)
QTY
1 Nos.
2. RC28 Bobbin (IS7U 10B 303 AA
(Weight/piece 14.8gm+/-0.5gm)
2 Nos.
3. Bearing Sleeve (IS7U 10986 AA)
(Weight/piece 8.5gm+/-0.5gm)
3 Nos.
4. RC21 Circuit Board (XS6U 10B
301AA) (Weight/piece 21.0gm+/0.5gm)
1 Nos.
5. RC28 Circuit Board (IS7U10B301-AA (Weight/piece
20.0gm+/-0.5gm)
2 Nos.
IMPORT ITEM
1. Polyamide (Nylon66) Resin/Powder
Zytel
2.Polyphthalamide
Resin/Powder Amodel (16%
Glassfiber Filled)
3. Polyphenylene
Sulphide
Resin/Powder Forton
(65% Glassfiber
Filled)
QTY
0.04869 kg
0.02274 kg
0.02956 kg
BIO-TECH VISION HQ F. No.
CARE PVT. LTD.
01/80/162/888/AM08/DES-VII
NC No.: 40/08
Adv. Auth. No.
RLA F. No. 08/24/040/93/AM08
Dated:13.02.2008 0810065961
Dated 13.07.2007
3.1.11 Case No. A-541
Status:
Approved
Application: Request is for adhoc norms for following:
Sl.No.
1.
Sl.No.
1.
2.
3.
4.
5.
EXPORT ITEM
Intra Ocular Lens (Foldable)
IMPORT ITEM
Acrylic Blanks
Pouches (Blister Tyvek Lids)
Lens Holder
Foto/Caps
Consumables (4% of FOB)
Qty
300000.000 No.
Qty
336000.000 No.
303000.000 No.
303000.000 No.
303000.000 No.
0.000 No.
11
Decision: With D/o C&PC OM No. 46011/233/2004-PC.II dated 08.02.2008, following
adhoc norms are approved:
EXPORT ITEM
Intra-Ocular Lens
Acrylic (Foldable)
QTY
– 1 No.
1.
2.
3.
4.
5.
6.
Case No. A-542
3.1.12
NC No.: 40/08
Dated:13.02.2008
IMPORT ITEM
Acrylic Blanks (Diameter
16mm +/- 0.02mm, weight
760mg +/- 5mg Thickness
3mm)
Relevant Pouches (TYVEK
Lid & Blister)
Relevant Lens Holder
Relevant Foto/Caps
Relevant Bungs
Consumable Items i.e. Optical
wax, Polishing Compound,
glass beads, metal DOP,
diamond tool, drill bit and
milling cutter
QTY
1.12 No.
Net + 1%
Net + 1%
Net + 1%
Net + 1%
Upto 4% of
FOB value of
export
BIOTECH VISION HQ F. No.
CARE PVT. LTD. 01/87/162/867/AM07/DES-VII
01/80/162/887/AM08/DES-VII
Adv. Lic. No.
RLA F. No.
0810062397
08/24/040/290/AM07
Dated 16.01.2007
RLA F. No. 08/24/040/94/AM08
Adv. Lic. No.
08100659229
Dated 11.07.2007
Status:
Approved
Application: Request is for adhoc norms for following:
Sl. No.
1
2
3
4
5
EXPORT ITEM
STERILE INJECTOR
IMPOR ITEM
INJECTOR-BODY
INJECTOR-ROD
INJECTOR-PUSH
INJECTOR SUPPORT
INTERNAL BLISTER INJECTOR
6
INTERNAL LID INJECTOR
7
EXTERNAL BLISTER INJECTOR
8
EXTERNAL LID INJECTOR
1
Sl. No.
Qty
100000 NUMBER
Qty
NET TO NET
NET TO NET
NET TO NET
NET TO NET
NET + 1% AS PER
GERNERAL NORMS
NET + 1% AS PER
GERNERAL NORMS
NET + 1% AS PER
GERNERAL NORMS
NET + 1% AS PER
12
GERNERAL NORMS
Sl.No.
EXPORT ITEM
1.
Sterile Injectors
Sl.No.
IMPORT ITEM
1.
Injector-Body
(COMPONENT) (Length : 85.50mm, Weight : 2.659 gm
2.
Injector-Rod
(COMPONENT) (Injector Mechanical Rod - Length:
109.5mm, Weight : 1.228 gm/Injector Hydraulic Rod-Length:
97.25mm, Weight 1.163 gm)
3.
Injector-Push
(COMPONENT) (Length : 6.8mm, Diameter 13.95mm
Weight : 0.392gm)
4.
Injector-Support
(COMPONENT) (Length : 33.70mm, Weight : 1.057 gm)
5.
Silicon-Plunger
(COMPONENT) (Length : 8mm, Diameter 2.75mm, Weight
:39gm)
6.
Internal Blister Injector (Packing Material) (Length :
136mm, Width 52.5mm, Weight 5.755Gm)
7.
Internal Lid Injector (Packing Material) (Length : 136mm,
Width 52.50mm,
8.
External Blister Injector (Packing Material) (Length 153mm
Width 71mm, Weight 8.974Gm)
9
Internal Lid Injector (Packing Material) (Length : 123mm,
Width 71mm)
Qty
132000.000 No.
Qty
132000.000 No.
132000.000 No.
132000.000 No.
132000.000 No.
132000.000 No.
133320.000 No.
133320.000 No.
133320.000 No.
133320.000 No.
Decision: With D/o C&PC OM No. 46011/233/2004-PC.II dated 08.02.2008, following
adhoc norms are approved:
EXPORT
ITEM
Sterile Injector
QTY
1 No.
Case No. A-543
3.1.13
IMPORT ITEM
1.
2.
3.
4.
5.
6.
7.
8.
9.
Relevant Injector - Body
Relevant Injector - Rod
Relevant Injector - Push
Relevant Injector Support
Relevant Silicon Plunger
Relevant Internal Blister Injector
Relevant Internal Lid Injector
Relevant External Blister Injector
Relevant External Lid Injector
BIOTEC VISION
CARE PVT. LTD.
QTY
Net to Net
Net to Net
Net to Net
Net to Net
Net to Net
Net + 1%
Net + 1%
Net + 1%
Net + 1%
HQ F. No.
01/85/162/539/AM07/DES-VII
Status:
Approved
13
NC No.: 40/08
Dated:13.02.2008
Adv. Lic. No.
0810058921
Dated 21.08.2006
Adv. Lic. No.
0810060108
Dated 05.10.2006
Adv. Lic. No.
0810060431
Dated 17.10.2006
Adv. Lic. No.
0810062416
Dated 16.01.2007
01/85/162/610/AM07/DES-VII
01/85/162/621/AM07/DES-VII
01/85/162/868/AM07/DES-VII
RLA F. No. 08/24/40/136/AM07
RLA F. No. 08/24/40/183/AM07
RLA F. No. 08/24/40/197/AM07
RLA F. No. 08/24/40/303/AM07
Application: Request is for adhoc norms for following:
Sl. No.
1
Sl. No.
1
2
3
4
5
6
EXPORT ITEM
INTRA OCULAR LENS (FOLDABLE)
IMPOR ITEM
ACRYLIC BLANKS
POUCHES (TYVEK LID & BLISTER)
LENS HOLDER
FOTO/CAP
BUNGS
CONSUMABLES
Qty
20000 NUMBER
Qty
22400 NOS.
20200 NOS.
20200 NOS.
20200 NOS.
20200 NOS.
4% OF FOB
VALUE
Sl. No.
EXPORT ITEM
INTRA OCULAR LENS (FOLDABLE)
IMPOR ITEM
ACRYLIC BLANKS
POUCHES (TYVEK LID & BLISTER)
LENS HOLDER
FOTO/CAP
BUNGS
CONSUMABLES
Qty
10000 NUMBER
Qty
11200 NOS.
10100 NOS.
10100 NOS.
10100 NOS.
10100 NOS.
4% OF FOB
VALUE
EXPORT ITEM
INTRA OCULAR LENS (FOLDABLE)
IMPOR ITEM
ACRYLIC BLANKS
POUCHES (TYVEK LID & BLISTER)
Qty
115000 NUMBER
Qty
128800 NOS.
116150 NOS.
1
Sl. No.
1
2
3
4
5
6
Sl. No.
1
Sl. No.
1
2
14
3
4
5
6
LENS HOLDER
FOTO/CAP
BUNGS
CONSUMABLES
Sl. No.
1
Sl. No.
1
2
EXPORT ITEM
INTRA OCULAR LENS (FOLDABLE)
IMPOR ITEM
ACRYLIC BLANKS
POUCHES (HOLSTER & ALLUMINIUM LID &
TYVEK LID)
LENS HOLDER
FOTO/CAP
BUNGS
CONSUMABLES
3
4
5
6
116150 NOS.
116150 NOS.
116150 NOS.
4% OF FOB
VALUE
Qty
115000 NUMBER
Qty
128800 NOS.
116150 NOS.
116150 NOS.
116150 NOS.
116150 NOS.
4% OF FOB
VALUE
Decision: With D/o C&PC OM No. 46011/233/2004-PC.II dated 08.02.2008, following
adhoc norms are approved:
EXPORT ITEM
QTY
Intra-Ocular Lens – 1 No.
Acrylic (Foldable)
IMPORT ITEM
1. Acrylic Blanks (Diameter 16mm
+/- 0.02mm, weight 760mg +/- 5mg
Thickness 3mm)
2. Relevant Pouches (TYVEK Lid &
Blister)
3. Relevant Lens Holder
4. Relevant Foto/Caps
5. Relevant Bungs
6. Consumable Items i.e. Optical wax,
Polishing Compound, glass beads,
metal DOP, diamond tool, drill bit
and milling cutter
QTY
1.12 No.
Net + 1%
Net + 1%
Net + 1%
Net + 1%
Upto 4% of
FOB value of
export
Case No. A-544
JINDAL POLY
FILMS LTD.
HQ File No.
01/87/050/1357/AM06/DES-VII
NC No.: 40/08
Dated:13.02.2008
1) AA No. 0510150348
Dated 03.02.2005
2) AA No. 0510168217
Dated 07.10.2005
3) AA No. 0510176296
Dated 13.02.2006
4) AA No. 0510209488
Dated 26.09.2007
RLA File Nos.
1) 05/21/40/656/AM05
2) 05/21/40/301/AM06
3) 05/24/40/845/AM06
4) 05/24/40/838/AM06
3.1.14
Status:
Deferred
Application: Request for allowing import ‘PTA’ (Purified Terephthalic Acid) in lieu of
‘DMT’ (Di-methyl Terephthalate) for outstanding imports against four advance authorizations
15
issued to firm for export of ‘POLYESTER CHIPS’ and ‘POLYESTER CHIPS FILM
GRADE-SILICA DMT ROUTE’ for manufacture of export product through ‘DMT Route’
Decision: The basic details of each advance authorizations are as under:
AA 0510150348
DT 3.2.05 (1)
05/21/40/656/AM05
AA 0510168217 DT
7.10.05 (2)
05/21/40/301/AM06
AA 0510176296
DT 13.2.06 (3)
05/24/40/845/AM06
SION H233
SION H233
ADHOC NORMS
(4.7) FIXED
EXPORT
ITEM
POLYESTER
CHIPS
POLYESTER
CHIPS
POLYESTER
CHIPS FILM
GRADE-SILICA
DMT ROUTE
POLYESTER CHIPS
FILM GRADE-SILICA
DMT ROUTE
EXPORT
QTY. AS
PER LIC.
16397 MT
15000 MT
3000 MT
3000 MT
AUTH NO.
RLA F. NO.
LIC.
ISSUED
UNDER
AA 0510209488 DT
26.9.07 (4)
05/24/40/838/AM06
ONLINE
CASE NO. 51/26/87ALC1/2007
AND
SUBSUMED WITH
THESE
CASES
‘PTA’
IN
ALL
CASES.
The norms in various cases as per SION/adhoc norms as per advance
authorization applications filed by firm/fixed by NC are summarized as under:
Entitlement of import as per
SION H233
DMT
MEG
DMT
1.0044 MT
PTA
0.8605 kg
0.39 kg
MEG
0.353 MT
MEG
0.3484 kg
0.02 kg
ANTIMONY TRIOXIDE
0.001 kg
TITANIUM DIOXIDE
AA No. 0510188126 dated
3.8.06 (NC ratified through
PTA)
1.03 kg
DMIP
MANGANESE
ACETATE
TRIETHYLENE
GLYCOL
PHOSPHORIC ACID
AA No. 0510176296 dated
13.02.2006 (NC ratified
through DMT)
0.0005 kg
0.01 kg
0.0003 kg
0.004 kg
ANTIMONY
TRIOXIDE
MANGANESE
ACETATE
TRIPHENYL
PHOSPHATE
SILICA (Sylobloc44)
ANTIMONY
PENTA
ARYTUNITOL
0.0004 MT
0.0004 MT
0.001 MT
0.0007 MT
0.000003 MT
ANTIMONY
TRIOXIDE
MANGANESE
ACETATE
0.0006 kg
0.0003 kg
PENTATHRITOL
0.0001 kg
TRIPHENYL
PHOSPHATE
SILICA
0.0013 kg
0.001 kg
0.0001 MT
The technical authority informed Committee that export product can be
manufactured through ‘DMT Route’ as well as through ‘PTA Route’. The admissible
quantity of ‘DMT’ with other requisite items of import as per corresponding SION
requested by firm for AA Nos. (1), and (2) for export through ‘DMT’ and that of ‘PTA’
with other requisite items of import allowed as per adhoc norms fixed by NC against
advance authorization No. 0510188126 dated 3.8.06 obtained by firm is calculated as
under (for advance authorizations (3), and (4) endorsement of entire quantity is claimed
as per above adhoc norms through ‘PTA’ Route):
16
Import Item
Sl. No.
DMT
1 (D)
1 (T)
2 (D)
2 (T)
3
4
13884.997400 MT
NIL
6139.994800 MT
NIL
NIL
NIL
13480.58 x 1.03
NIL
5961.16 x 1.03
NIL
NIL
NIL
1 (D)
1 (T)
2 (D)
2 (T)
3
4
NIL
2509.579410 MT
NIL
7777.927820 MT
2581.500000 MT
2581.500000 MT
NIL
2916.42 x 0.8605
NIL
9038.84 x 0.8605
3000 x 0.8605
3000 x0.8605
1 (D)
1 (T)
2 (D)
2 (T)
3
4
5257.426200 MT
1016.080728 MT
2324.852400 MT
3149.131856 MT
1045.200000 MT
1045.200000 MT
13480.58 X 0.3900
2916.42 X 0.3484
5961.16 X 0.3900
9038.84 X 0.3484
3000 X 0.3484
3000 X 0.3484
1 (D)
1 (T)
2 (D)
2 (T)
3
4
0
3.791346 MT
0
11.750492 MT
3.900000 MT
3.900000 MT
13480.58 X NA.
2916.42 X .0013
5961.16 X NA
9038.84 X .0013
3000 X .0013
3000 X .0013
1 (D)
1 (T)
2 (D)
2 (T)
3
4
13.480580 MT
1.749852 MT
5.961160 MT
5.423304 MT
1.800000 MT
1.800000 MT
13480.58 X .0010
2916.42 X .0006
5961.16 X .0010
9038.84 X .0006
3000 X .0006
3000 X .0006
1 (D)
1 (T)
2 (D)
2 (T)
3
4
0
0.291642 MT
0
0.903884 MT
0.300000 MT
0.300000 MT
13480.58 X NA
2916.42 X .0001
5961.16 X NA
9038.84 X .0001
3000 X .0001
3000 X .0001
1 (D)
1 (T)
2 (D)
2 (T)
3
4
269.611600 MT
0
119.223200 MT
0
0
0
13480.58 X 0.02
2916.42 X NA
5961.16 X 0.02
9038.84 X NA
NA
NA
1 (D)
1 (T)
53.922320 MT
0
13480.58 X 0.004
2916.42 X NA
PTA
MEG
SILICA
ANTIMONY
TRIOXIDE
PENTATHRYTOL
DMIP
TITANIUM
DIOXIDE
Qty.
QTY FOR
ENDORSEMENT AS
REQUESTED BY FIRM
Change in Qty.
13885.00 MT
+ 0.003 MT
6139.99 MT
0 MT
NIL
NIL
NA
NA
2509.58 MT
+ 0.001 MT
7777.92 MT
- 0.007 MT
2581.50 MT
2581.50 MT
0 MT
0 MT
6273.51 MT
+ 0.004 MT
5473.98 MT
+ 0.003 MT
1045.20 MT
1045.20 MT
0 MT
0 MT
3.79 MT
+ 0.001 MT
11.75 MT
0 MT
3.90 MT
3.90 MT
0 MT
0 MT
15.23 MT
- 0.001 MT
11.38 MT
+ 0.004 MT
1.80 MT
1.80 MT
0 MT
0 MT
NIL
+ 0.291 MT
NIL
+ 0.903 MT
0.30 MT
NIL
0 MT
+ 0.300 MT
96.00 MT
96.00 MT
32.00 MT
32.00 MT
NIL
NIL
NA
NA
NIL
+ 53.922 MT
17
2 (D)
2 (T)
3
4
23.844640 MT
0
0
0
5961.16 X 0.004
9038.84 X NA
NA
NA
5.00 MT
+ 18.844 MT
NIL
NIL
NA
NA
HFO-LSHS-FUEL
535.00 MT
- 535.00 MT
OIL
1
NIL
NIL
NOTE: 1) HFO-LSHS-FUEL OIL NOT ALLOWED UNDER ADHOC NORMS; 2) ENDORSEMENT OF REMAINAIN IMPORT
ITEMS LIKE TRIETHYLENE GLYCOL, MANGNESE ACETATE, ANTIFOAM, PHOSPHORIC ACID, TRIPHENYL PHOSPHATE
NOT REQUESTED BY FIRM
It It was also noted that firm has not asked for endorsement of items such as
Triethylene Glycol, Manganese Acetate, Antifoam, Phosphoric Acid, Triphenyl
Phosphate.
M/s Jindal Poly Films Ltd. has to allow import of ‘PTA (Purified Terephthalic
Acid)’ in lieu of ‘DMT (Di-methyl Terephthalate)’ against above four advance
authorizations issued to them, the exports against which have already been completed,
as they are not getting ‘DMT’ due to closure DMT plants worldwide and nonavailability of DMT.
Committee observed that quantity sought to be endorsed by firm is also indicated
in above table. Committee also noted submission made by firm that ‘DMT’ plants
worldwide are closed and it is not available in market to enable firm replenish against
exports already made by them against above four advance authorizations.
Case was deferred for further discussion.
18
Case No. A-545
3.1.15
NC No.: 40/08
Dated:13.02.2008
GUJARAT
PARAFFINS PVT.
LTD.
Adv. Lic. No.
0810030667
Dated: 11.07.2003
HQ F. No.
01/87/050/196/AM04/DES-VII
Status:
Approved
RLA F. No.
08/80/040/260/AM03
Application: Request is for adhoc norms for following:
Sl. No.
1
Sl. No.
1
2
EXPORT ITEM
Qty
100 MT
Qty
765 KG/1 MT
350 KG/1 MT
TYRE WAX
IMPOR ITEM
FULLY REFINED PARAFFIN WAX
MICROCRYSTALLINE WAX
Decision: With D/o C&PC OM No. 46011/131/2005-PC.II dated 10.04.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
QTY
Tyre Wax
1 MT 1. Paraffin Wax
0.80 MT
containing 80 +/- 1% Paraffin
2. Microcrystalline Wax
0.20 MT
Wax
and
20
+/1%
3. Polyethylene Wax
0.02 MT
Microcrystalline Wax
Note: Since applicant has applied for Item Nos. (1), and (2) above, the same are allowed.
METRO TYRES
LTD.
NC No.: 40/08
Adv. Lic. No.
Dated:13.02.2008 3010047498
Dated 29.05.2006
Case No. A-547
3.1.16
HQ F. No.
01/82/050/500/AM07/DES-VII
RLA F. No. 30/24/40/16/AM07
Status:
Approved
Application: This is a reference dated 03.08.2007 from Office of JDGFT, Ludhiana
enclosing a representation from firm to allow import of ‘Nylon Tyres Cord Fabric
Dipped’, to be used in manufacture of tyres in place of ‘Nylon Fabrics’.
Decision: With DIPP letter dated 13.02.2008, amendment in item of import form ‘Nylon
Fabric’ to ‘Nylon Tyre Cord Fabric Dipped’ is allowed and accordingly following
norms are approved:
EXPORT ITEM
QTY
Nylon
Bicycle 100 kg
Tyres of EPDM
Rubber Compound
with
Reflective
Tape
1.
2.
3.
4.
IMPORT ITEM
Natural Rubber
Synthetic Rubber
EPDM
Zinc Oxide
Precipitated Silica
QTY
26.42 kg
19.34 kg
1.41 kg
3.50 kg
19
5. Carbon Black
6. Rubber Chemicals
7. Bead Wire
8. Nylon Tyre Cord
Fabric Dipped
9. Miscellaneous
Chemicals
10.Reflective Tape
width (4.763mm –
5mm)
11.Cotton Chaffer
width (6mm –
8mm)
3.1.17 Case No. A-548
NC No.: 40/08
Dated:13.02.2008
BLS POLYMERS
LTD.
Adv. Lic. No.
0510208833
Dated 11.09.2007
17.35 kg
1.98 kg (upto 7% of FOB
Value)
10.00 kg
11.00 kg
8.00 kg (upto 5% of FOB
Value)
Net Content + 5% Wastage
Net Content + 5% Wastage
HQ F. No.
01/87/162/405/AM08/DES-VII
RLA F. No.
05/24/040/466/AM08
Status:
Approved
Application: Request is for clarification to CLA that export item ‘XLPE COMPOUND’
and ‘LT-XLPE COMPOUND’ are same.
Decision: Committee decided to clarify that descriptions ‘XLPE COMPOUND’ and
‘LT-XLPE COMPOUND’ are used for same export items.
3.1.18 Case No. A-549
NC No.: 40/08
Dated:13.02.2008
MMT (INDIA)
PVT. LTD.
Adv. Lic. No.
0710033017
Dated 29.09.2004
HQ F. No.
01/87/050/791/AM05/DES-VII
RLA F. No.
07/24/040/422/AM05
Status:
Approved
Application: Request is for adhoc norms for following:
Sl. No.
1
Sl. No.
1
EXPORT ITEM
PVC SHEETS WITH/WITHOUT DIGITAL PRINTING BY
PAINT/INK
MMT 014/062/075/076/078
IMPOR ITEM
VINYL SHEETS KPMM 12/14/75/76/78 OR LFL12
Qty
1722000.000
SQ. FOOT
Qty
2050000.000
SQ. FOOT
20
Decision: With ALC earlier decision in its Meeting 10/87-ALC1/2005 dated 15.06.2005
(Case No. 7/37/87-ALC1/2004), following adhoc norms are approved:
EXPORT ITEM
QTY
Prefabricated Flexible PVC 1 Sq. Foot
Panel with/without digital
printing (Minimum size 10ft.
x 10ft.)
3.1.19 Case No. A-552
NC No.: 40/08
Dated:13.02.2008
HENKEL CAC P
LTD.
Adv. Lic. No.
0310435381
Dated 09.07.2007
IMPORT ITEM
Relevant flexible PVC
Coated Polyester Sheets
(Max width 76 inch)
QTY
1.15 Sq. Ft.
HQ F. No.
01/87/050/311/AM08/DES-VII
RLA F. No.
03/94/040/240/AM08
Status:
Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Prepared Adhesives Based On Plastics (Two Component
1
Laminating Adhiesives) Adhesive (Polyurethane Resin
Containing 100% Resin)
2
Additive (Polyester Resin Containing 100% Resin)
Sl.No.
IMPORT ITEM
1
Polypropylene Glycol
2.
Diethylene Glycol
Diphenyl Methane 4,4 Isocyanate Yellowish Liquid, Pure
3.
Grade Standard
Toluene Di Isocyanate Liquid Colourless – Light yellow, Pure
4.
Grade, Standard
Phalic Anhydride White Crystalline Powder, Pure Grade,
5.
Standard
6.
Diethylene Glycol
Qty
70000.000 kg
56000.000 kg
Qty
14910.000 kg
1050.000 kg
24360.000 kg
1390.000 kg
16968.000 kg
20048.000 kg
Decision: With D/o C&PC OM No. 46011/11/2006-PC.II dated 09.02.2007 read with
their OM No. 46011/11/2006-PC.II dated 11.02.2008, following adhoc norms are
approved:
EXPORT ITEM
QTY
Polyurethane
Resin 1 kg
containing 100% Resin
1.
2.
3.
4.
5.
IMPORT ITEM
Polypropylene Glycol
Castor Oil
Diethylene Glycol
Diphenyl Methane 4, 4 Di isocyanate
Toluene Di isocyanate
QTY
0.213 kg
0.225 kg
0.015 kg
0.348 kg
0.199 kg
21
Polyeste
Resin 1 kg
containing 100% Resin
1. Phthalic Anhydride
2. Castor Oil
3. Diethylene Glycol
MAYUR
UNIQUOTERS
LTD.
NC No.: 40/08
Adv. Auth. No.
Dated:13.02.2008 1310022176
Dated 24.07.2006
Adv. Auth. No.
1310021403
Dated 24.04.2006
3.1.20 Case No. A-553
0.303 kg
0.400 kg
0.358 kg
HQ F. No.
Status:
01/84/050/199/AM07/DES-VII
Approved
01/84/050/29/AM08/DES-VII
RLA F. No. 13/24/040/10/AM07
RLA F. No. 13/24/040/21/AM06
Application: Request is for amendment in the description of export item as “PU Leather
Cloth (weight/Sq. Mtr = 360 grams +/- 10% and above)” for shipments made prior to
24.05.2007 in respect of AA No. 1310022176 dated 24.07.2006 and that as “PU Leather
Cloth (weight/Sq. Mtr = 375 grams +/- 10% and above)” for shipments made prior to
05.06.2007 in respect of AA No. 1310021403 dated 24.04.2006, and also that the GSM
of export product may be allowed to be calculated with the details of net weight and the
quantity of export product in Sq. Mtr. given shipping bills in respect of above advance
authorization for the shipments made prior to the respective dates.
Decision: Committee decided to accept export item with description as “PU Leather
Cloth (weight/Sq. Mtr = 360 grams +/- 10% and above)” in respect of AA No.
1310022176 dated 24.07.2006 only for shipments made prior to 24.05.2007 and that as
“PU Leather Cloth (weight/Sq. Mtr = 375 grams +/- 10% and above)” in respect of AA
No. 1310021403 dated 24.04.2006 only for shipments made prior to 05.06.2007. After
aforesaid dates, descriptions of export items and norms for respective licences will be as
under:
EXPORT ITEM
QTY
PU
Leather
Cloth 1 Sq. Mtr.
(Weight/Sq. Mtr = 360
gm + 10 %)
1.
2.
3.
4.
5.
6.
7.
8.
9.
IMPORT ITEM
PU Resin Solution (Solid
Content 30 +/- 1%)
PU Resin Solution (Solid
Content 40 +/- 1%)
Methyl Ethyl Ketone
Dimethylformamide
Toluene
Cross Linking Agent
Pigments
Release Paper
Coagulated Base Fabric
QTY
0.0725 kg
0.0725 kg
0.0231 kg
0.0231 kg
0.0166 kg
0.0028 kg
0.0048 kg
0.500 Sq. Mtr
1.00 Sq. Mtr
22
PU
Leather
Cloth 1 Sq. Mtr.
(Weight/Sq. Mtr = 375
gm +/- 10 %)
1.
2.
3.
4.
5.
6.
7.
8.
9.
(310 gsm +/- 10%)
PU Resin Solution (Solid
Content 30 +/- 1%)
PU Resin Solution (Solid
Content 40 +/- 1%)
Methyl Ethyl Ketone
Dimethylformamide
Toluene
Cross Linking Agent
Pigments
Release Paper
Coagulated Base Fabric
(310 gsm +/- 10%)
0.1050 kg
0.0800 kg
0.0238 kg
0.0369 kg
0.0120 kg
0.0033 kg
0.0048 kg
0.500 Sq. Mtr
1.00 Sq. Mtr
MOTHERSONSUMI HQ F. No.
SYSTEMS LTD.
01/87/050/205/AM08/DES-VII
01/80/050/213/AM07/DES-VII
01/80/050/214/AM07/DES-VII
NC No.: 40/08
Adv. Lic. No.
RLAF.No.
Dated:13.02.2008 0510204921
25/24/040/362/AM08
Dated 14.6.2007
RLA F. No. 25/24/040/3/AM07
Adv. Lic. No.
RLA F. No. 25/24/040/4/AM07
2510001671
Dated 30.5.2006
Adv. Lic. No.
2510001672
Dated 30.5.2006
3.1.21 Case No. A-554
Status:
Approved
Application: Request is for adhoc norms for following:
Sl.
No.
EXPORT ITEM
1
PARTS OF AUTOMOBILES: Panel ASMC/PLR UPR TR
2
TRIM ASY-BODY L/PLR
3
Moulding ASM W/S SI GARN
4
FILLER ASM-I/P STRG COL OPC
5
Panel ASM-L/PLR UPR TR
6
Panel ASM-L/PLR TR
Qty
32594.000
Number
19168.000
Number
30728.000
Number
62100.000
Number
13074.000
Number
4360.000
Number
23
7
Sl.
1
2
COVER W/S O/S MSTRE SEN TOTAL NET CONTENTS OF
IMPORT ITEMS IN EXPORT PRODUCTS: 1. ADHESIVE
(T.C.: Bond Master 831.01 CR): (11,722.055 LTRS.), 2.
FABRIC: (T.C.: Becca Fabric Neutral Grey Sample Circular
Knit Scour & HS/Becca Fabric Onyx sample Circular Knit
Scour and HS) (14,004.721 MTRS.), 3. POLYPROPYLENE:
(T.C.:
EPALEX
7489
HS
UV2
7B71modified
Polypropylene/EPALEX 7479 HS UV 19245 MODIFIED
Polypropylene/EPALEX 7489 HS UV 2 9227 modified
Polypropylene: (36,997.962 KGS.), 4. Nut Push (T.C.: Nut
Push in 4.2 High Retention GM 11609650: EMHART
17465): 86498 NOS. (Net to Net), 5. Screw (T.C.:Screw
ASM-6-LOBED PAN HD GM 11900481: NEDS 10014192):
86498 NOS. (Net To Net), 6. Retaining Clip (T.C.: ZUS7501
Retaining Clip 82041141011) 98322 NOS. (Net to Net),7. PU
Laminated Fabric: (2129.143 MTRS.), 8. ABS (T.C.:
Astology ABS/PC M130S45001 Black): (2661.571 KGS.)
IMPORT ITEM
ADHESIVE (T.C.: Bond Master 831.01 CR)
7
FABRIC: (T.C.: Becca Fabric Neutral Grey Sample Circular
Knit Scour & HS/Becca Fabric Onyx sample Circular Knit
Scour and HS)
POLYPROPYLENE: (T.C.: EPALEX 7479 HS UV2 7B71
modified Polypropylene/EPALEX 7489 HS UV 19245
modified Polypropylene/EPALEX 7489 HS UV 2 9227
modified Polypropylene
NUT PUSH (T.C.: Nut Push in 4.2 High Retention GM
11609650: EMHART 17465)
SCREW (T.C.:Screw ASM-6-LOBED PAN HD GM
11900481: NEDS 10014192)
RETAINING CLIP (T.C.: ZUS7501 Retaining Clip
82041141011)
PU LAMINATED FABRIC
8
ABS (T.C.: Astology ABS/PC M130S45001 Black)
3
4
5
6
Sl.
No.
1
2
3
4
5
6
7
EXPORT ITEM
PANEL ASM-C/PLR UPR TR
PANEL ASM-C/PLR UPR TR
PANEL ASM-C/PLR UPR TR
PANEL ASM-C/PLR UPR TR
MOLDING ASM – WS SI GARN
MOLDING ASM – WS SI GARN
MOLDING ASM – WS SI GARN
18633.000
Number
Qty
12308.158
LITRE
14704.958
METER
38847.860 KG
86498.000
NUMBER
86498.000
NUMBER
98322.000
NUMBER
2235.600
METER
2794.650 KG
Qty
5239 Number
5251 Number
4509 Number
1608 Number
4513 Number
1596 Number
4513 Number
24
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Sl.
No.
1
2
3
4
5
6
7
8
9
10
11
Sl.
No.
1
2
3
4
5
6
7
8
MOLDING ASM – WS SI GARN
TRIM ASY-BODY L/PLR
TRIM ASY-BODY L/PLR
FILLER ASM –I/P STRG COL OPG
FILLER ASM –I/P STRG COL OPG
COVER W/S O/S MSTRE SEN
PANEL ASM-BODY L/PLR TR
PANEL ASM-BODY L/PLR TR
PANEL ASM-BODY L/PLR TR
PANEL ASM-BODY L/PLR TR
PANEL ASM-BODY L/PLR UPR TR
PANEL ASM-BODY L/PLR UPR TR
PANEL ASM-BODY L/PLR UPR TR
PANEL ASM-BODY L/PLR UPR TR
IMPORT ITEM
BOND MASTER 831.01CR
BECCA FABRIC NEUTRAL GREY SAMPLE CIRCULAR
KNIT SCOUR AND HS
BECCA FABRIC ONYX SAMPLE CIRCULAR KNIT
SCOUR AND HS
PU LAMINATE FABRIC
EPALEX 7489 HS UV2 7B71 MODIFIED POLY
PROPYLENE
EPALEX 7479 HS UV2 9245 MODIFIED POLY
PROPYLENE
EPALEX 7489 HS UV2 9227 MODIFIED POLY
PROPYLENE
ASTALOY ABS/PC M130S 45001 BLACK
NUT-PUSH IN 4.2 HIGH RETENTION GM#16609651;
EMHART#17465
SCREW ASM-6-LOBED PAN HD GM#11900481;
NEDS#10014192
ZUS7501 RETAINING CLIP 82041141011
EXPORT ITEM
PANEL ASM-C/PLR UPR TR
PANEL ASM-C/PLR UPR TR
PANEL ASM-C/PLR UPR TR
PANEL ASM-C/PLR UPR TR
MOLDING ASM – WS SI GARN
MOLDING ASM – WS SI GARN
MOLDING ASM – WS SI GARN
MOLDING ASM – WS SI GARN
1596 Number
4891 Number
4891 Number
24945 Number
8750 Number
3282 Number
348 Number
1596 Number
348 Number
1608 Number
240 Number
1608 Number
348 Number
939 Number
Qty
4689.49 LTR
2038.13 MTR
4305.74 MTR
1263.04 MTR
5224.65 KG
1061.38 KG
10494.85 KG
1185.42 KG
38815 NOS.
38815 NOS.
46615 NOS.
Qty
5239 Number
5251 Number
4509 Number
1608 Number
4513 Number
1596 Number
4513 Number
1596 Number
25
9
10
11
12
13
14
15
16
17
18
19
20
21
Sl.
No.
1
2
3
4
5
6
7
8
9
10
11
TRIM ASY-BODY L/PLR
TRIM ASY-BODY L/PLR
FILLER ASM –I/P STRG COL OPG
FILLER ASM –I/P STRG COL OPG
COVER W/S O/S MSTRE SEN
PANEL ASM-BODY L/PLR TR
PANEL ASM-BODY L/PLR TR
PANEL ASM-BODY L/PLR TR
PANEL ASM-BODY L/PLR TR
PANEL ASM-BODY L/PLR UPR TR
PANEL ASM-BODY L/PLR UPR TR
PANEL ASM-BODY L/PLR UPR TR
PANEL ASM-BODY L/PLR UPR TR
IMPORT ITEM
4891 Number
4891 Number
24945 Number
8750 Number
3282 Number
348 Number
1596 Number
348 Number
1608 Number
240 Number
1608 Number
348 Number
939 Number
Qty
BOND MASTER 831.01CR
BECCA FABRIC NEUTRAL GREY SAMPLE CIRCULAR
KNIT SCOUR AND HS
BECCA FABRIC ONYX SAMPLE CIRCULAR KNIT
SCOUR AND HS
PU LAMINATE FABRIC
EPALEX 7489 HS UV2 7B71 MODIFIED POLY
PROPYLENE
EPALEX 7479 HS UV2 9245 MODIFIED POLY
PROPYLENE
EPALEX 7489 HS UV2 9227 MODIFIED POLY
PROPYLENE
ASTALOY ABS/PC M130S 45001 BLACK
NUT-PUSH IN 4.2 HIGH RETENTION GM#16609651;
EMHART#17465
SCREW ASM-6-LOBED PAN HD GM#11900481;
NEDS#10014192
ZUS7501 RETAINING CLIP 82041141011
4689.49 LTR
2038.13 MTR
4305.74 MTR
1263.04 MTR
5224.65 KG
1061.38 KG
10494.85 KG
1185.42 KG
38815 NOS.
38815 NOS.
46615 NOS.
Decision: With D/o C&PC OM No. 46011/79/2007-PC.II dated 11.01.2008, following
adhoc norms are approved:
EXPORT ITEM
PANEL ASMC/PLR UPR TR
Part No. 92172504
QTY
IMPORT ITEM
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/ PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
QTY
0.056 Litre
Net Content in Export
Product + 5% Wastage
26
3.
PANEL ASMC/PLR UPR TR
Part No. 92172506
1 No. 1.
2.
3.
PANEL ASMC/PLR UPR TR
Part No. 92172503
1 No. 1.
2.
3.
PANEL ASMC/PLR UPR TR
Part No. 92172505
1 No. 1.
2.
3.
MOLDING ASM - 1 No. 1.
SCOUR AND HS)
RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
SPRAY CONTACT
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
27
W/S SI GARN
Part No. 92172534
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
MOLDING ASM - 1 No. 1. SPRAY CONTACT
W/S SI GARN
ADHESIVE (BOND
Part No. 92172532
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC
NEUTRAL GREY SAMPLE
CIRCULAR KNIT SCOUR &
HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
28
MOLDING ASM - 1 No. 1. SPRAY CONTACT
W/S SI GARN
ADHESIVE (BOND
Part No. 92172533
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
MOLDING ASM - 1 No. 1. SPRAY CONTACT
W/S SI GARN
ADHESIVE (BOND
Part No. 92172531
MASTER 831.01CR)
2. BECCA FABRIC NEUTRAL
GREY SAMPLE CIRCULAR
KNIT SCOUR &HS
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
TRIM ASY1 No. 1. SPRAY CONTACT
BODY L/PLR
ADHESIVE (BOND
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
29
Part No. 92172522
TRIM ASYBODY L/PLR
Part No. 92172521
FILLER ASM -I/P
STRG COL OPG
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. NUT/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
30
Part No. 92172613
FILLER ASM -I/P
STRG COL OPG
Part No. 92174207
COVER W/S O/S
MSTRE SEN
Part No. 92183833
PANEL ASMBODY L/PLR TR
Part No. 92183753
MASTER 831.01CR)
2. PU LAMINATED FABRIC
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7479 HS UV1 9245
MODIFIED POLY
PROPYLENE)
4. ABS/PC ALLOY (ASTALOY
ABS/PC M130S 45001
BLACK)
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. PU LAMINATE FABRIC
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7479 HS UV1 9245
MODIFIED POLY
PROPYLENE)
4. ABS/PC ALLOY (ASTALOY
ABS/PC M130S 45001
BLACK)
1 No. 1. ABS/PC ALLOY (ASTALOY
ABS/PC M130S 45001
BLACK)
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
31
PANEL ASMBODY L/PLR TR
Part No. 92183754
PANEL ASMBODY L/PLR TR
Part No. 92183749
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC
NEUTRAL GREY SAMPLE
CIRCULAR KNIT SCOUR &
HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6-
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
32
PANEL ASMBODY L/PLR TR
Part No. 92183750
PANEL ASMBODY L/PLR
UPR TR
Part No. 92183751
LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMININATED FABRIC
(BECCA FABRIC
NEUTRAL GREY SAMPLE
CIRCULAR KNIT SCOUR &
HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
33
PANEL ASMBODY L/PLR
UPR TR
Part No. 92183752
PANEL ASMBODY L/PLR
UPR TR
Part No. 92183747
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC
NEUTRAL GREY SAMPLE
CIRCULAR KNIT SCOUR &
HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
34
PANEL ASMBODY L/PLR
UPR TR
Part No. 92183748
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC
NEUTRAL GREY SAMPLE
CIRCULAR KNIT SCOUR &
HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT/NUT-PUSH IN 4.2
HIGH RETENTION
GM#11609651;EMHART#17
465
5. SCREW/SCREW ASM-6LOBED PAN HD
GM#11900481;NEDS#10014
192
6. CLIP/ZUS7501 RETAINING
CLIP 82041141011
3.1.22 Case No. A-555
GUJARAT RAFFIA
INDUSTRIES LTD
NC No.: 40/08
Adv. Auth. No.
Dated:13.02.2008 0810059751
Dated:21.09.2006
Adv. Auth. No.
0810061631
Dated:12.12.2006
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
HQ F. No.
01/87/050/560/AM07/DES-VII
01/87/050/926/AM07/DES-VII
RLA F. No.
08/24/040/169/AM07
RLA F. No.
08/24/040/214/AM07
Application: Request is for adhoc norms for following:
Status:
Approved
35
Sl.No.
1
EXPORT ITEM
Qty
63/0- LAMINATED PLASTIC
SHEETINGS
UOM
FOB (Rs.)
200000.000 K.G 16362909.00
FOB
(Currency)
348147.00
US$
NET EYELETS: 4700000 NOS.
Total 16,362,909.00 348,147.00
Sl.No.
IMPORT ITEM
Qty
UOM
1
POLYETHYLENE
UNLAMINATED FABRIC 40- 132000.000 K.G
130 GSM
2
LDPE/LLDPE GRANUELS
3
TITANIUM DIOXIDE
4
COLOUR PIGMENT
5
WAX
6
U.V.STABLIZER
7
ALUMINIUM EYELETS
(GROMETS)
Sl.No.
1
CIF (Rs.)
9400000.00
1
2
3
4
5
6
200000.00
US$
95000.00
US$
8000.00
3960.000
K.G
376000.00
US$
2000.00
616.000
K.G
94000.00
US$
2400.00
1012.000
K.G
112800.00
US$
18500.00
1012.000
K.G
869500.00
US$
18800.00
4747000.000 Number 883600.00
US$
Total 16,200,900.00 344,700.00
81400.000
EXPORT ITEM
63/0- LAMINATED PLASTIC
SHEETINGS
K.G
4465000.00
Qty
300000.000 KG
NET EYELETS: 7050000 NOS.
Sl.No.
CIF
(Currency)
IMPORT ITEM
POLYETHYLENE UNLAMINATED
FABRIC 40-130 GSM
LDPE/LLDPE GRANUELS
TITANIUM DIOXIDE
COLOUR PIGMENT
WAX
U.V.STABLIZER
Qty
198000.000 K.G.
122100.000 K.G.
5940.000 K.G.
924.000 K.G.
1518.000 K.G.
1518.000 K.G.
36
7
ALUMINIUM EYELETS (GROMETS)
7120500.000 Number
Decision: With D/o C&PC OM No. 46011/153/2006-PC.II dated 03.01.2008, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Laminated
Plastic 1
1. Polyethylene Unlaminated
Sheetings
(Laminated MT
Woven Fabric (40-130 gsm)
Tarpulins based on plastic
2. LDPE Granules
woven fabric, Net Eyelets 3. Titanium Dioxide
4700000 Nos.)
4. Colour Pigment
5. Wax
6. UV Stabilizer
7. Aluminium Eyelets
(Gromets)
Laminated
Plastic 1
1. Polyethylene Unlaminated
Sheetings
(Laminated MT
Woven Fabric (40-130 gsm)
Tarpulins based on plastic
2. LDPE Granules
woven fabric, Net Eyelets 3. Titanium Dioxide
7050000 Nos.)
4. Colour Pigment
5. Wax
6. UV Stabilizer
7. Aluminium Eyelets
(Gromets)
3.1.23 Case No. A-556
NC No.: 40/08
Dated:13.02.2008
MERINO PANEL
PRODUCTS LTD.,
GREENPLY
INDUSTRIES
LTD., &
CENTURY
LAMINATING
CO.
SION ENTRIES
H301 & H302
QTY
0.6600 MT
0.4070 MT
0.0198 MT
0.0030 MT
0.0050 MT
0.0050 MT
Net + 1%
Wastage
0.6600 MT
0.4070 MT
0.0198 MT
0.0030 MT
0.0050 MT
0.0050 MT
Net + 1%
Wastage
HQ F. No.
01/87/162/569/AM07/DES-VII
Status:
Approved
RLA F. No.
09/24/040/175/AM08
Application: Request is regarding difficulty in giving GSM wise break up of paper due
to uncertainty in respect of specification by the importers as requirement of paper varies
as per demand of buyer for product as desired by Office Zonal JDGFT, Kolkata.
Decision: The existing SION entries at Sl. Nos. H301 and H302 are as under:
37
H301
Single Side
Decorative
Laminates with
barrier paper
1 sq meter 1
x 1 mm
Thickness
of wt. 1.45
Kg +/-2.5%
2
3
4
5
6
7
Kraft paper
0.937 kg
1 sq mtr x 1 1
mm
Thickness
of wt. 1.45
Kg +/-2.5%
2
3
4
5
Kraft paper
1.033 Kg
Base Paper
Tissue Paper
Phenol
Melamine
0.133 kg
0.033 kg
0.457 kg
0.133 kg
Base Paper
0.107 kg
Barrier Paper
0.086 kg
Tissue Paper
0.030 kg
Phenol
0.361 kg
Malamine
0.181 kg
Paraformaldehyde
0.300 kg
(91 +/- 1% Purity)
OR
7
Methanol
0.398 Kg
8
B.O.P.P. Film
0.010 kg
Note: 1. The above norm has been worked out on the 1.00 mm thickness with average wt.
of 1.45 Kg +/- 2.5%
2. In Case of variation in thickness/weight, the quantity of item of import viz.
Phenol, Para Formaldehyde/Methanol and Kraft Paper to be allowed may be
arrived by adopting the following formula:
AxB/C
Where A=Qty. allowed for 1.00 mm thickness of wt. 1.45 Kg +/-2.5%.
B= The thickness or wt/sq. meter of decorative laminates proposed to be
exported.
C=Either the Standard thickness of 1.00 mm or the Standard wt. of 1.45 Kg/sq.
meter of 1.00 mm thickness.
3. The quantity of items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine
and BOPP Film will remain unchanged irrespective of thickness and weight of
decorative laminate to be exported.
4. The above norms are applicable only in case of Decorative Laminates having
thickness range between 0.5 mm and 20 mm thickness.
H302
Single Side
Decorative
Laminates without
Barrier Paper
38
6
Paraformaldehyde (91+/- 0.300 kg
1% Purity)
OR
6
Methanol
0.398 Kg
7
B.O.P.P. Film
0.011 kg
8
Titanium Dioxide
0.0055 kg
Note: 1. The above norms has been worked out on the 1.00 mm thickness with average
wt. of 1.45 Kg +/-2.5%
2. In case of variation in thickness/weight,the quantity of item of import viz.
Phenol, Paraformaldehyde,Kraft paper and Titanium Dioxide to be allowed may
be arrived by adopting Formula:
AxB/C
Where
A= Qty. allowed for 1.00 mm thickness of wt. 1.45 Kg +/2.5%.
B= The thickness or wt/sq. meter of decorative laminates proposed to be
exported.
C=Either the Standard thickness of 1.00 mm or the Standard wt.of 1.45 Kg/sq.
meter of 1.00 mm thickness.
3. The quantity of BOPP film given above will be for one sq. meter of Decorative
Laminates irrespective of thickness and weight of decorative laminates to be
exported.
4. The quantity of all the other items unchanged irrespective of change of thickness
and weight of decorative laminates to be exported.
5. It is clarified that the above formula is applicable only incase of Decorative
Laminates having thickness range between 0.5 mm and 1.5 mm.
With D/o C&PC OM No. 46011/47/2007-PC.II dated 03.01.2008, Committee
recommended to amend SION entries at H301 and H302 as under:
H301 Single Side
Decorative
Laminates with
barrier paper
1 sq meter 1
x 1 mm
Thickness
of wt. 1.45
Kg +/2.5%
2
3
4
5
6
Kraft paper (60 gsm –
205 gsm)
0.937 kg
Base Paper (50 gsm –
150 gsm)
Barrier Paper (50 gsm –
120 gsm)
0.107 kg
Tissue Paper (20 gsm –
38 gsm)
Phenol
Malamine
0.030 kg
0.086 kg
0.361 kg
0.181 kg
39
7
Paraformaldehyde
0.300 kg
(91 +/- 1% Purity)
OR
7
Methanol
0.398 Kg
8
B.O.P.P. Film
0.010 kg
Note: 1. The above norm has been worked out on the 1.00 mm thickness with average
wt. of 1.45 Kg +/- 2.5%
2. In Case of variation in thickness/weight, the quantity of item of import viz.
Phenol, Para Formaldehyde/Methanol and Kraft Paper to be allowed may be
arrived by adopting the following formula:
AxB/ C
Where A=Qty. allowed for 1.00 mm thickness of wt. 1.45 Kg +/-2.5%.
B= The thickness or wt/sq. meter of decorative laminates proposed to be
exported.
C=Either the Standard thickness of 1.00 mm or the Standard wt. of 1.45 Kg/sq.
meter of 1.00 mm thickness.
3. The quantity of items viz. Base Paper, Barrier Paper, Tissue Paper, Melamine
and BOPP Film will remain unchanged irrespective of thickness and weight of
decorative laminate to be exported.
4. The above norms are applicable only in case of Decorative Laminates
having thickness range between 0.5 mm and 1.5 mm thickness.
1.033 Kg
Kraft paper (60 gsm –
205 gsm)
0.133 kg
Base Paper (50 gsm –
150 gsm)
0.033 kg
Tissue Paper (20 gsm –
38 gsm)
4
Phenol
0.457 kg
5
Melamine
0.133 kg
6
Paraformaldehyde (91+/- 0.300 kg
1% Purity)
OR
6
Methanol
0.398 Kg
7
B.O.P.P. Film
0.011 kg
Note: 1. The above norms has been worked out on the 1.00 mm thickness with average
wt. of 1.45 Kg +/-2.5%
2. In case of variation in thickness/weight,the quantity of item of import viz.
Phenol, Paraformaldehyde,Kraft paper and Titanium Dioxide to be allowed may
be arrived by adopting Formula:
AxB/C
Where
A= Qty. allowed for 1.00 mm thickness of wt. 1.45 Kg +/2.5%.
H302 Single Side
Decorative
Laminates without
Barrier Paper
1 sq mtr x 1
1 mm
Thickness 2
of wt. 1.45
Kg +/3
2.5%
40
B= The thickness or wt/sq. meter of decorative laminates proposed to be
exported.
C=Either the Standard thickness of 1.00 mm or the Standard wt.of 1.45 Kg/sq.
meter of 1.00 mm thickness.
3. The quantity of BOPP film given above will be for one sq. meter of Decorative
Laminates irrespective of thickness and weight of decorative laminates to be
exported.
4. The quantity of all the other items unchanged irrespective of change of
thickness and weight of decorative laminates to be exported.
5. it is clarified that the above formula is applicable only incase of Decorative
Laminates having thickness range between 0.5 mm and 1.5 mm.
Above amendments in SION H301 & H302 may be notified though Public Notice.
ONLINE CASES
Case No.:613/24/87ALC1/2007
Party Name:BAYER
MATERIALSCIENCE PVT.
LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00947/AM07/
RLA File
:04/24/040/00487/AM06/
Lic.No/Date:0410077290 Defer Date:
23.12.2005
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
1
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- THERMOPLASTIC
POLYURETHANE
100000.000 K.G 13771200.00
Desmopan 192.
Plastics
Total 13,771,200.00
IMPORT ITEM
Qty
UOM
CIF (Rs.)
1
DESMODUR TRIAL PRODUCT
37300.000 K.G
PU 0118 F FUSED
3445009.35
2
1,4 BUTANE DIOL
19800.000 K.G
1728639.00
3
ADIPIC ACID
12100.000 K.G
667194.00
200.000
K.G
352836.00
100.000
K.G
22052.25
4
5
STABOXAL I
-NACOL 8-99
FOB
(Currency)
302000.00
US$
302,000.00
CIF
(Currency)
74973.00
US$
37620.00
US$
14520.00
US$
6480.00
US$
405.00 US$
41
6
-DESMOPHEN 2002 EINGEG
--
46200.000 K.G
Total
110880.00
US$
11,310,666.60 244,878.00
5094936.00
Decision: With D/o C&PC OM No. 46011/23/2006-PC.II dated 01.06.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
Thermoplastic Polyurethane 1 kg
Resin Granules Desmopan
192
IMPORT ITEM
1. Desmodur Trial Product PU
0118 F Fused
2. 1, 4 Butane Diol
3. Adipic Acid
4. Staboxal 1
5. Nacol 8-99
6. Desmophen 2002
QTY
0.3730 kg
0.1691 kg
0.1112 kg
0.0018 kg
0.0010 kg
0.4469 kg
Case No.:14/33/80ALC2/2006
Party Name:MOTHERSON
SUMI SYSTEMS LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/80/050/00798/AM07/
RLA File
:25/24/040/00013/AM07/
Lic.No/Date:2510001761 Defer Date:
18.10.2006
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
6
2
3
4
5
EXPORT ITEM
61/0- PANEL ASM- C/PLR
UPR TR
Part No. 92172504
61/0- PANEL ASM-C/PLR
UPR TR
Part No. 92172506
61/0- PANEL ASM-C/PLR
UPR TR
Part No. 92172503
61/0- PANEL ASM-C/PLR
UPR TR
Part No. 92172505
61/0- MOLDING ASM -
Qty
UOM
FOB (Rs.)
FOB
(Currency)
5000.000
Number 1721005.00
37700.00
US$
950.000
Number 222475.30
4873.50
US$
5000.000
Number 1170922.50
25650.00
US$
950.000
Number 222475.30
4873.50
US$
5000.000
Number 1456235.00
31900.00
42
6
7
8
9
10
11
12
13
14
15
16
17
18
19
W/S SI GARN
Part No. 92172534
61/0- MOLDING ASM W/S SI GARN
Part No. 92172532
61/0- MOLDING ASM W/S SI GARN
Part No. 92172533
61/0- MOLDING ASM W/S SI GARN
Part No. 92172531
61/0- TRIM ASY-BODY
L/PLR
Part No. 92172522
61/0- TRIM ASY-BODY
L/PLR
Part No. 92172521
61/0- FILLER ASM -I/P
STRG COL OPG
Part No. 92172613
61/0- FILLER ASM -I/P
STRG COL OPG
Part No. 92174207
61/0- COVER W/S O/S
MSTRE SEN
Part No. 92183833
61/0- PANEL ASM-BODY
L/PLR TR
Part No. 92183753
61/0- PANEL ASM-BODY
L/PLR TR
Part No. 92183754
61/0- PANEL ASM-BODY
L/PLR TR
Part No. 92183749
61/0- PANEL ASM-BODY
L/PLR TR
Part No. 92183750
61/0- PANEL ASM-BODY
L/PLR UPR TR
Part No. 92183751
61/0- PANEL ASM-BODY
US$
900.000
Number 262122.30
5742.00
US$
5000.000
Number 1456235.00
31900.00
US$
900.000
Number 262122.30
5742.00
US$
4500.000
Number 1873476.00
41040.00
US$
4500.000
Number 1873476.00
41040.00
US$
23000.000
Number 3404147.90
74570.60
US$
8000.000
Number 1184051.40
25937.60
US$
2000.000
Number 36629.60
802.40 US$
850.000
Number 252604.30
5533.50
US$
1100.000
Number 326899.70
7161.00
US$
800.000
Number 237745.20
5208.00
US$
1200.000
Number 356617.80
7812.00
US$
800.000
Number 275360.80
6032.00
US$
1050.000
Number 361411.10
7917.00
43
20
21
L/PLR UPR TR
Part No. 92183752
61/0- PANEL ASM-BODY
L/PLR UPR TR
800.000
Part No. 92183747
61/0- PANEL ASM-BODY
L/PLR UPR TR
1050.000
Part No. 92183748
US$
Number 275360.80
6032.00
US$
Number 361411.10
7917.00
US$
Total
Sl.No.
1
2
3
4
5
6
7
8
9
10
11
IMPORT ITEM
BOND MASTER 831.01CR
Qty
17,592,784.40
UOM
4156.070 Litre
BECCA FABRIC NEUTRAL GREY
SAMPLE CIRCULAR KNIT
1260.170 Meter
SCOUR &HS
BECCA FABRIC ONYX SAMPLE
CIRCULAR KNIT SCOUR AND
4862.250 Meter
HS
PU LAMINATE FABRIC
EPALEX 7489 HS UV2 7B71
MODIFIED POLY PROPYLENE
EPALEX 7479 HS UV1 9245
MODIFIED POLY PROPYLENE
EPALEX 7489 HS UV2 9227
MODIFIED POLY PROPYLENE
ASTALOY ABS/PC M130S 45001
BLACK
NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17465
SCREW ASM-6-LOBED PAN HD
GM#11900481;NEDS#10014192
ZUS7501 RETAINING CLIP
82041141011
1162.030 Meter
2992.090 K.G
1336.100 K.G
12519.600 K.G
1442.100 K.G
385,384.10
CIF
CIF (Rs.)
(Currency)
15554.40
717836.00
US$
563547.00
12211.20
US$
2174398.00
47115.90
US$
31744.60
US$
10691.10
493396.00
US$
4774.10
220323.00
US$
44734.40
2064494.00
US$
7887.00
363986.00
US$
1465012.00
37450.000 Number
378245.00
37450.000 Number
71155.00
45350.000 Number
Total
8196.00
US$
1541.80
US$
2456.70
113375.00
US$
8,625,767.00 186,907.20
Decision: With D/o C&PC OM No. 46011/79/2007-PC.II dated 11.01.2007, following adhoc
norms are approved:
44
EXPORT ITEM
PANEL ASMC/PLR UPR TR
Part No. 92172504
PANEL ASMC/PLR UPR TR
Part No. 92172506
PANEL ASMC/PLR UPR TR
Part No. 92172503
PANEL ASMC/PLR UPR TR
Part No. 92172505
QTY
IMPORT ITEM
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
1 No. 1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
QTY
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
45
MOLDING ASM W/S SI GARN
Part No. 92172534
MOLDING ASM W/S SI GARN
Part No. 92172532
1 No.
1 No.
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. BECCA FABRIC NEUTRAL
GREY SAMPLE CIRCULAR
KNIT SCOUR &HS
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
46
MOLDING ASM W/S SI GARN
Part No. 92172533
MOLDING ASM W/S SI GARN
Part No. 92172531
1 No.
1 No.
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. BECCA FABRIC NEUTRAL
GREY SAMPLE CIRCULAR
KNIT SCOUR &HS
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
47
TRIM ASY-BODY 1 No.
L/PLR
Part No. 92172522
TRIM ASY-BODY 1 No.
L/PLR
Part No. 92172521
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
48
FILLER ASM -I/P
STRG COL OPG
Part No. 92172613
FILLER ASM -I/P
STRG COL OPG
Part No. 92174207
COVER W/S O/S
MSTRE SEN
Part No. 92183833
PANEL ASMBODY L/PLR TR
Part No. 92183753
1 No.
1 No.
1 No.
1 No.
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. PU LAMINATE FABRIC
3. EPALEX 7479 HS UV1 9245
MODIFIED POLY
PROPYLENE
4. ASTALOY ABS/PC M130S
45001 BLACK
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. PU LAMINATE FABRIC
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7479 HS UV1 9245
MODIFIED POLY
PROPYLENE)
4. ASTALOY ABS/PC M130S
45001 BLACK
1. ASTALOY ABS/PC M130S
45001 BLACK
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
49
PANEL ASMBODY L/PLR TR
Part No. 92183754
PANEL ASMBODY L/PLR TR
Part No. 92183749
1 No.
1 No.
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. BECCA FABRIC NEUTRAL
GREY SAMPLE CIRCULAR
KNIT SCOUR &HS
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
50
PANEL ASMBODY L/PLR TR
Part No. 92183750
PANEL ASMBODY L/PLR
UPR TR
Part No. 92183751
1 No.
1 No.
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. BECCA FABRIC NEUTRAL
GREY SAMPLE CIRCULAR
KNIT SCOUR &HS
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
51
PANEL ASMBODY L/PLR
UPR TR
Part No. 92183752
PANEL ASMBODY L/PLR
UPR TR
Part No. 92183747
1 No.
1 No.
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. BECCA FABRIC NEUTRAL
GREY SAMPLE CIRCULAR
KNIT SCOUR &HS
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1.
SPRAY
CONTACT
ADHESIVE
(BOND
MASTER 831.01CR)
2. RELEVANT FABRIC/PU
LAMINATED FABRIC
(BECCA FABRIC ONYX
SAMPLE CIRCULAR KNIT
SCOUR AND HS)
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2 9227
MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
52
PANEL ASMBODY L/PLR
UPR TR
Part No. 92183748
Case No.:15/33/80ALC2/2006
7 HQ File
:01/80/050/00799/AM07/
1 No.
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
1. SPRAY CONTACT
ADHESIVE (BOND
MASTER 831.01CR)
2. BECCA FABRIC NEUTRAL
GREY SAMPLE CIRCULAR
KNIT SCOUR &HS
3. RELEVANT MODIFIED
POLYPROPYLENE RESIN
(EPALEX 7489 HS UV2
7B71 MODIFIED POLY
PROPYLENE)
4. NUT-PUSH IN 4.2 HIGH
RETENTION
GM#11609651;EMHART#17
465
5. SCREW ASM-6-LOBED PAN
HD
GM#11900481;NEDS#10014
192
6. ZUS7501 RETAINING CLIP
82041141011
Net to Net
0.056 Litre
Net Content in Export
Product + 5% Wastage
Net Content in Export
Product + 5% Wastage
Net to Net
Net to Net
Net to Net
Party Name:MOTHERSON
SUMI SYSTEMS LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:25/24/040/00014/AM07/
Lic.No/Date:2510001762 Defer Date:
18.10.2006
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
8
Case No.:1/37/80-ALC2/2006
Party Name:B.I.C. AUTO
PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Appr
oved
HQ File
:01/80/050/00810/AM07/
RLA File
:05/24/040/00347/AM07/
Lic.No/Date:0510193169
23.10.2006
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
(Currency)
53
1
Sl.No.
1
2
3
4
5
6
61/0RUBBERISED
NON-ASBESTOS
BRAKE LININGS
(Rubberised with
Nitrile Butadiene
Rubber) NBR
243384.000
IMPORT ITEM
NITRILE BUTADIENE
RUBBER (NBR)
ANY GRADE
GRAPHITE FLAKE
ANY GRADE
FIBRE GLASS
ANY GRADE
ZINC OXIDE
ANY GRADE
ARAMID FIBRE
ANY GRADE
ACRALIC FIBER
MINERAL FIBRE
ANY GRADE
K.G
Qty
18734144.00
Total 18,734,144.00
UOM CIF (Rs.)
407264.00
US$
407,264.00
CIF (Currency)
73015.200 K.G
6717398.40
146030.40 US$
12169.200 K.G
279891.60
6084.60 US$
97353.600 K.G
5373918.70
116824.32 US$
12169.200 K.G
167934.96
3650.76 US$
1216.900
K.G
1119548.00
24338.00 US$
1216.900
K.G
27988.70
608.45 US$
Total 13,686,680.36 297,536.53
Decision: With DIPP letter dated 13.02.2007, following adhoc norms are approved:
EXPORT ITEM
QTY
Rubberised
Non-Astestos 1 kg
Brake Linings containing
Min 23% NBR, 30% Fibre
Glass
IMPORT ITEM
1. Nitrile Butadiene Rubber
(NBR)
2. Graphite Flake
3. Fibre Glass
4. Zinc Oxide
5. Aramid Fibre
6. Acralic Fiber
QTY
0.2769 kg
0.0461 kg
0.3692 kg
0.0461 kg
0.0046 kg
0.0046 kg
Case No.:487/24/87ALC1/2007
Party
Name:MENSHENROPA
PLASTICS PVT.LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00728/AM07/
RLA File
:31/21/040/00291/AM07/
Lic.No/Date:3110027209 Defer Date:
14.11.2006
10
Status:Approved
54
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
63/0- SPONGE
APPLICATOR
ASSEMBLY
Qty
UOM
2625000.000 Number
FOB (Rs.)
1037300.00
FOB
(Currency)
23000.00
US$
Total
Sl.No.
1
IMPORT ITEM
SUMMERTALK APPLICATOR
1,037,300.00 23,000.00
CIF
Qty
UOM CIF (Rs.)
(Currency)
21266.00
2625000.000 Number 968666.30
US$
Total 968,666.30 21,266.00
Decision: With D/o C&PC OM No. 46011/16/2007-PC.II dated 03.10.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
Sponge Applicator 1 No.
Assembly
IMPORT ITEM
1. LDPE Granules
QTY
1.05 kg/kg content in export
product
1.05 kg/kg content in export
product
1.05 kg/kg content in export
product
Net to Net
2. HDPE Granules
3. Polypropylene
Granules
4. Relevant Sponge
Component
Case No.:495/24/87ALC1/2007
Party Name:SOLOGUARD
MEDICAL DEVICES PVT
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00751/AM07/
RLA File
:04/24/040/00313/AM07/
Lic.No/Date:0410085791 Defer Date:
20.11.2006
Status:Appro
ved
Application: Request is for adhoc norms for following:
12
Sl.No.
1
EXPORT ITEM
63/0- GENSAFE
BRAND SINGLE USE
2ML SYRINGES WITH
Qty
252000.000
UOM
FOB (Rs.)
Number 232344.00
FOB
(Currency)
5163.20 US$
55
2
NEEDLE
63/0- GENSAFE
BRAND SINGLE USE
5ML SYRINGES WITH
NEEDLE
360000.000
Number 365112.00
Total
Sl.No.
1
2
3
4
5
6
7
8
IMPORT ITEM
HIGH DENSITY
POLYETHELENE GENERAL
PURPOSE INJECTION
MOULDING GRADE
POLYPROPYLENE RANDOM
COPOLYMER INJECTION
MOULDING GRADE
BULK DISPOSABLE
NEEDLES UNSTERILED
PAPER 60GSM BLEACHED
PAPER 180GSM BLEACHED
LDPE PLASTIC FILM NATURAL
COATED WHITE BOARD
PRINTING INK BLACK
GRAVURE
Qty
8113.60 US$
597,456.00
UOM
13,276.80
CIF
CIF (Rs.)
(Currency)
922.676
K.G
47748.48
1061.08
US$
995.951
K.G
56470.42
1254.90
US$
612000.000 Number
192780.00
186.876
362.700
K.G
K.G
16818.84
24482.25
4284.00
US$
373.75 US$
544.05 US$
232.524
K.G
20927.16
465.05 US$
722.808
K.G
21142.13
469.83 US$
0.043
K.G
23.22
0.52 US$
Total
380,392.50 8,453.18
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM QTY
Disposable
1 kg
2ml/5ml Syringes
With Needle
IMPORT ITEM
1. HDPE Granules
QTY
Net Content in Export Product +
1% Wastage
2. Polypropylene
Granules
Net Content in Export Product +
1% Wastage
3. Relevant Needles
4. Printing Ink
5. Packing material
Net + 1% Wastage
0.007 gms/100 nos. of Syringes
As per Packing Policy
56
Case No.:498/24/87ALC1/2007
Party Name: UNIVERSAL Meet No/Date:40/87FORME INDIA PVT.
ALC1/2007
LTD.,
13.02.2008
HQ File
:01/87/050/00767/AM07/
RLA File
:04/24/040/00315/AM07/
Status:Approved
Lic.No/Date:0410085997 Defer Date:
28.11.2006
Application: Request is for adhoc norms for following:
FOB
(Currency)
63/0- SPOOLS OF
140000.00
1
6000.000 Packs 6377000.00
VARIOUS SIZEZ
US$
60000.00
2
63/0- RETAIL PACKS 40000.000 Packs 2733000.00
US$
Total 9,110,000.00
200,000.00
CIF
Sl.No.
IMPORT ITEM
Qty
UOM
CIF (Rs.)
(Currency)
PVC FOAM A610 4mm IN
20515.00
1
VARIOUS COLOURS WITH 6500.000 Foot
934458.00
US$
ADHESIVES
PVC FOAM V710 4.8mm. IN
16290.85
2
VARIOUS COLOURS WITH 5845.000 Foot
742048.00
13
US$
ADHESIVES
PVC FOAM V1510, 4.80mm.
22967.20
3
IN VARIOUS COLOURS
5320.000 Foot
1046156.00
US$
WITH ADHESIVES
PVC FOAM V2510 4.8mm. IN
29127.45
4
VARIOUS COLOURS WITH 4900.000 Foot
1326755.00
US$
ADHESIVES
PVC FOAM A710, 19mm IN
16116.00
5
VARIOUS COLOURS WITH 1700.000 Foot
734084.00
US$
ADHESIVES
Total
4,783,501.00 105,016.50
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
Decision: With D/o C&PC OM No. 46011/105/2007-PC.II dated 29.10.2007,
following adhoc norms are approved:
EXPORT ITEM
QTY
Light/Medium/Hard
1 Sq.
Closed Cell PVC Foam Meter
Adhesive Tape
(Thickness x width x
length = 4.8 mm x 25 mm
IMPORT ITEM
Light/Medium/Hard Closed Cell
PVC Foam Adhesive Tape
(V710/1510/2510)
(Thickness x width x length =
4.8 mm x 1.447 mm x 10.6
QTY
1.10 Sq.
Meter
57
x 10 Meter)
Meter)
Case No.:511/24/87ALC1/2007
Party Name:SOLOGUARD
MEDICAL DEVICES PVT
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00793/AM07/
RLA File
:04/24/040/00327/AM07/
Lic.No/Date:0410086116 Defer Date:
04.12.2006
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
2
15
Sl.No.
1
2
3
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- SOLOGUARD
BRAND SINGLE USE
2700000.000 Number 2235600.00
2ML SYRINGES WITH
NEEDLE
63/0- SOLOGUARD
BRAND SINGLE USE
4100000.000 Number 3583400.00
5ML SYRINGES WITH
NEEDLE
Total
5,819,000.00
IMPORT ITEM
Qty
UOM
HIGH DENSITY
POLYETHELENE GENERAL
10332.190 K.G
PURPOSE INJECTION
MOULDING GRADE
POLYPROPYLENE RANDOM
COPOLYMER INJECTION
11123.830 K.G
MOULDING GRADE
BULK DISPOSABLE
6800000.000 Number
NEEDLES UNSTERILED
FOB
(Currency)
48600.00
US$
77900.00
US$
126,500.00
CIF
CIF (Rs.)
(Currency)
546572.85
11882.02
US$
644737.19
14016.03
US$
2189600.00
4
PAPER 60GSM BLEACHED
2085.300
K.G
191847.60
5
PAPER 180GSM BLEACHED 4050.000
K.G
279450.00
6
LDPE PLASTIC FILMNATURAL
2590.900
K.G
238362.80
7
COATED WHITE BOARD
8057.900
K.G
240931.21
8
PRINTING INK BLACK
0.476
K.G
262.75
47600.00
US$
4170.60
US$
6075.00
US$
5181.80
US$
5237.64
US$
5.71 US$
58
GRAVURE
Total
4,331,764.40 94,168.80
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM QTY
IMPORT ITEM
Disposable
1 kg
1. HDPE Granules
2ml/5ml
Syringes
With
Needle
2. Polypropylene
Granules
3. Relevant Needles
4. Printing Ink
5. Packing material
QTY
Net Content in Export Product +
1% Wastage
Net Content in Export Product +
1% Wastage
Net + 1% Wastage
0.007 gms/100 nos. of Syringes
As per Packing Policy
Case No.:512/24/87ALC1/2007
Party Name:SOLOGUARD
MEDICAL DEVICES PVT
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00794/AM07/
RLA File
:04/24/040/00329/AM07/
Lic.No/Date:0410086117 Defer Date:
04.12.2006
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
16
2
3
4
Sl.No.
EXPORT ITEM
63/0- SOLOGUARD BRAND
SINGLE USE 2ML SYRINGES
WITHOUT NEEDLE
63/0- SOLOGUARD BRAND
SINGLE USE 5ML SYRINGES
WITHOUT NEEDLE
63/0- SOLOGUARD BRAND
SINGLE USE 10ML SYRINGES
WITHOUT NEEDLE
63/0- SOLOGUARD BRAND
SINGLE USE 20ML SYRINGES
WITHOUT NEEDLE
IMPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
(Currency)
525000.000 Number 295312.50
6562.50 US$
700000.000 Number 441000.00
9800.00 US$
150000.000 Number 168750.00
3750.00 US$
30000.000 Number 66150.00
1470.00 US$
Total 971,212.50
21,582.50
Qty
UOM CIF (Rs.)
CIF
59
(Currency)
3
HIGH DENSITY POLYETHELENE
GENERAL PURPOSE INJECTION
MOULDING GRADE
POLYPROPYLENE RANDOM
COPOLYER INJECTION MOULDING
GRADE
PAPER 60GSM BLEACHED
4
PAPER 180GSM BLEACHED
1029.765 K.G
5
LDPE PLASTIC FILM NATURAL
607.475
6
COATED WHITE BOARD
1851.850 K.G
7
PRINTING INK BLACK GRAVURE
0.098
1
2
2439.043 K.G
126220.45
2804.90
US$
2620.948 K.G
148607.72
3302.39
US$
453.735
40836.15
K.G
K.G
K.G
Total
907.47 US$
1544.65
69509.14
US$
1214.95
54672.75
US$
1203.70
54166.61
US$
53.11
1.18 US$
494,065.93 10,979.24
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following adhoc
norms are approved:
EXPORT ITEM QTY
Disposable
1 kg
2ml/5ml/10
ml/20 ml
Syringes Without
Needle
IMPORT ITEM
1. HDPE Granules
QTY
Net Content in Export Product +
1% Wastage
2. Polypropylene
Granules
3. Printing Ink
4. Packing material
Net Content in Export Product +
1% Wastage
0.007 gms/100 nos. of Syringes
As per Packing Policy
Case No.:19/41/80ALC2/2006
Party Name:HENKEL
ADHESIVES
TECHNOLOGIES INDIA
PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/80/050/01023/AM07/
RLA File
:31/24/040/00292/AM07/
Lic.No/Date:3110027462 Defer Date:
06.12.2006
17
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
60
Case No.:517/24/87ALC1/2007
Party Name:HALDIA
PETROCHEMICALS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00805/AM07/
RLA File
:02/24/040/00255/AM07/
Lic.No/Date:0210096164 Defer Date:
08.12.2006
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No. EXPORT ITEM
Qty
1
63/0- Benzene
16750.000
18
Sl.No. IMPORT ITEM
Qty
1
Naphtha
19999.500
UOM
M.T
Total
UOM
M.T
Total
FOB (Rs.)
564684375.00
564,684,375.00
CIF (Rs.)
539386515.00
539,386,515.00
FOB (Currency)
12562500.00 US$
12,562,500.00
CIF (Currency)
11999700.00 US$
11,999,700.00
Decision: With D/o C&PC OM No. 46011/244/2002-PC.II dated 08.06.2004, following
adhoc norms are approved:
EXPORT ITEM
Benzene (from Olefin Complex)
QTY
1 MT
IMPORT ITEM
Naphtha
QTY
1.194 MT
Case No.:518/24/87ALC1/2007
Party
Name:MENSHENROPA
PLASTICS PVT.LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00809/AM07/
RLA File
:31/21/040/00325/AM07/
Lic.No/Date:3110027507 Defer Date:
11.12.2006
Status:Approved
Application: Request is for adhoc norms for following:
FOB
(Currency)
63/0- SPONGE
23000.00
19 1
262500.000 Number 1037300.00
APPLICATOR ASSEMBLY
US$
Total
1,037,300.00
23,000.00
CIF
Sl.No.
IMPORT ITEM
Qty
UOM
CIF (Rs.)
(Currency)
SUMMERTALK APPLICATOR
21266.00
1
(CAPS & CLOSURES FOR
262500.000 Number 968666.30
US$
BOTTLES)
Total
968,666.30 21,266.00
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
61
Decision: With D/o C&PC OM No. 46011/16/2007-PC.II dated 03.10.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
Sponge Applicator 1 No.
Assembly
IMPORT ITEM
1. LDPE Granules
QTY
1.05 kg/kg content in export
product
1.05 kg/kg content in export
product
1.05 kg/kg content in export
product
Net to Net
2. HDPE Granules
3. Polypropylene
Granules
4. Relevant Sponge
Component
Case No.:526/24/87ALC1/2007
Party Name:SOLOGUARD
MEDICAL DEVICES PVT
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00834/AM07/
RLA File
:04/24/040/00348/AM07/
Lic.No/Date:0410086425 Defer Date:
19.12.2006
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
20
2
EXPORT ITEM
63/0- ALISON BRAND
SINGLE USE 2ML
SYRINGES WITH
NEEDLE
63/0- ALISON BRAND
SINGLE USE 5ML
SYRINGES WITH
NEEDLE
Qty
UOM
FOB (Rs.)
468000.000
Number 400140.00
8892.00 US$
912000.000
Number 882360.00
19608.00
US$
Total
Sl.No.
1
2
3
FOB
(Currency)
IMPORT ITEM
High Density Polyethelene
general purpose injection
moulding grade
polypropylene random
copolymer injection moulding
grade
Bulk Disposable Needles
Qty
1,282,500.00
UOM
28,500.00
CIF
CIF (Rs.)
(Currency)
2160.960
K.G
111829.87
2485.11
US$
2303.610
K.G
130615.10
2902.56
US$
1380000.000 Number
434700.00 9660.00
62
4
unsteriled
paper 60gsm bleached
430.308
K.G
5
paper 180gsm bleached
837.900
K.G
6
LDPE plastic film -Natural
531.636
K.G
7
Printing Ink black gravure
0.096
K.G
8
coated white board
1656.620
K.G
Total
US$
38727.72 860.62 US$
1256.85
56558.25
US$
1063.27
47847.24
US$
52.16
1.16 US$
1076.81
48456.25
US$
868,786.59 19,306.38
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM QTY
Disposable
1 kg
2ml/5ml Syringes
With Needle
IMPORT ITEM
1. HDPE Granules
QTY
Net Content in Export Product +
1% Wastage
Net Content in Export Product +
1% Wastage
Net + 1% wastage
0.007 gms/100 nos. of Syringes
As per Packing Policy
2. Polypropylene
Granules
3. Relevant Needles
4. Printing Ink
5. Packing material
Case No.:528/24/87ALC1/2007
Party Name:SOLOCARE
MEDICALS PRIVATE
LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00835/AM07/
RLA File
:04/24/040/00351/AM07/
Lic.No/Date:0410086428 Defer Date:
19.12.2006
Status:Approved
Application: Request is for adhoc norms for following:
21
Sl.No.
1
2
EXPORT ITEM
63/0- solocare brand
Disposable 2ml syringes
with needle
63/0- solocare brand
Disposable 5ml syringes
with needle
Qty
UOM
FOB (Rs.)
FOB
(Currency)
210000.000 Number 184506.00
4011.00 US$
427500.000 Number 407065.50
8849.25 US$
63
3
4
63/0- solocare brand
Disposable 2ml syringes
without needle
63/0- solocare brand
Disposable 5ml syringes
without needle
210000.000 Number 124614.00
2709.00 US$
712500.000 Number 471960.00
10260.00
US$
Total
Sl.No.
1
2
3
4
5
6
7
IMPORT ITEM
High Density Polyethelene
General Purpose Injection
Moulding grade
polypropylene Random
copolymer Injection moulding
Grade
Bulk Disposable needles
Unsteriled
Paper 60GSM Bleached
Paper 180GSM Unbelached
LDPE Plastic Film Natural
coated white board
Qty
1,188,145.50
UOM
25,829.25
CIF
CIF (Rs.)
(Currency)
2530.310
K.G
133853.61 2909.86 US$
2667.020
K.G
154580.36 3360.44 US$
637500.000 Number
205275.00 4462.50 US$
496.140
969.000
608.940
1901.820
40395.72
44574.00
56022.48
56864.42
691,565.59
K.G
K.G
K.G
K.G
Total
878.17 US$
969.00 US$
1217.88 US$
1236.18 US$
15,034.03
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM
Disposable 2ml/5ml
Syringes
With/Without
Needle
QTY
1 kg
IMPORT ITEM
1. HDPE Granules
2. Polypropylene
Granules
3. Relevant Needles
4. Packing material
QTY
Net Content in Export Product
+ 1% Wastage
Net Content in Export Product
+ 1% Wastage
Net + 1% wastage
As per Packing Policy
Case No.:529/24/87ALC1/2007
Party Name:SOLOCARE
Meet No/Date:40/87MEDICALS PRIVATE LTD., ALC1/2007
13.02.2008
HQ File
:01/87/050/00836/AM07/
RLA File
:04/24/040/00352/AM07/
22
Status:Approved
Lic.No/Date:0410086429 Defer Date:
19.12.2006
64
Application: Request is for adhoc norms for following:
Sl.No.
1
2
EXPORT ITEM
Qty
63/0- Solocare Brand
Disposable 3ml Syringes
with needles
63/0- Solocare brand
Disposable 5ml syringes
with Needle
UOM
FOB (Rs.)
375000.000
Number 327750.00
7125.00 US$
920000.000
Number 825240.00
17940.00
US$
Total
Sl.No.
IMPORT ITEM
4
5
High Density Polyethelene
General Purpose Injection
Moulding Grade
Polypropylene Random
Copolymer Injection Moulding
Grade
Bulk Disposable needles
Unsteriled
Paper 60GSM bleached
Paper 180GSM Unbleached
6
7
1
2
3
FOB
(Currency)
Qty
1,152,990.00
UOM
25,065.00
CIF
CIF (Rs.)
(Currency)
2163.460
K.G
114447.03
2487.98
US$
2319.550
K.G
134441.12
2922.63
US$
1295000.000 Number
419.640
827.630
K.G
K.G
LDPE Plastic Film Natural
520.450
K.G
Coated White Board
1606.600
K.G
Total
9065.00
US$
34167.09 742.76 US$
38070.75 827.63 US$
1040.90
47881.40
US$
1044.29
48037.19
US$
834,034.58 18,131.19
416990.00
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM
Disposable 3ml/5ml
Syringes With
Needle
QTY
1 kg
IMPORT ITEM
1. HDPE Granules
2. Polypropylene
Granules
3. Relevant Needles
4. Packing material
QTY
Net Content in Export Product +
1% Wastage
Net Content in Export Product +
1% Wastage
Net + 1% wastage
As per Packing Policy
65
Case No.:558/24/87ALC1/2007
Party Name:HALDIA
PETROCHEMICALS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00887/AM07/
RLA File
:02/24/040/00277/AM07/
Lic.No/Date:0210097122 Defer Date:
10.01.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No. EXPORT ITEM
Qty
UOM
FOB (Rs.)
1
63/0- Benzene
30150.000 M.T
1010778750.00
Total
1,010,778,750.00
25 Sl.No. IMPORT ITEM
Qty
UOM
CIF (Rs.)
1
Naphtha
35999.100
M.T 965495862.00
Total 965,495,862.00
FOB (Currency)
22612500.00 US$
22,612,500.00
CIF (Currency)
21599460.00 US$
21,599,460.00
Decision: With D/o C&PC OM No. 46011/244/2002-PC.II dated 08.06.2004, following
adhoc norms are approved:
EXPORT ITEM
Benzene (from Olefin Complex)
QTY
1 MT
IMPORT ITEM
Naphtha
QTY
1.194 MT
Case No.:577/24/87ALC1/2007
Party Name:SOLOGUARD
MEDICAL DEVICES PVT
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00902/AM07/
RLA File
:04/24/040/00408/AM07/
Lic.No/Date:0410086966 Defer Date:
17.01.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
26
1
2
3
EXPORT ITEM
Qty
63/0- HICARE
BRAND SINGLE USE
560000.000
2ML SYRINGES WITH
NEEDLE
63/0- HICARE
BRAND SINGLE USE
975000.000
5ML SYRINGES WITH
NEEDLE
63/0- HICARE
50000.000
BRAND SINGLE USE
UOM
FOB (Rs.)
FOB
(Currency)
Number 466200.00
10360.00
US$
Number 877500.00
19500.00
US$
Number 73125.00
1625.00
US$
66
10ML SYRINGES
WITH NEEDLE
Total
Sl.No.
1
2
3
4
5
6
7
8
IMPORT ITEM
1,416,825.00
Qty
HIGH DENSITY
POLYETHELENE
GENERAL PURPOSE
2525.042
INJECTION MOULDING
GRADE
POLYPROPYLENE
RANDOM COPOLYMER
2702.599
INJECTION MOULDING
GRADE
BULK DISPOSABLE
1585000.000
NEEDLES UNSTERILED
PAPER 60GSM
495.630
BLEACHED
PAPER 180GSM BLEACHED 999.875
LDPE PLASTIC FILM 622.620
NATURAL
COATED WHITE BOARD
1929.915
PRINTING INK BLACK
0.111
GRAVURE
31,485.00
CIF
CIF (Rs.)
(Currency)
UOM
K.G
130670.92
2903.80
US$
K.G
153237.36
3405.27
US$
Number
499275.00
11095.00
US$
K.G
44606.70
991.26 US$
K.G
67491.56
1499.81 US$
K.G
56035.80
1245.24 US$
K.G
56450.01
1254.44 US$
K.G
59.91
1.33 US$
Total
1,007,827.26 22,396.15
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM
Disposable
2ml/5ml/10 ml
Syringes With
Needle
27 Case No.:578/24/87-
QTY
IMPORT ITEM
1 kg
1. HDPE Granules
2. Polypropylene
Granules
3. Relevant Needles
4. Printing Ink
5. Packing material
Party Name:SOLOGUARD
QTY
Net Content in Export Product +
1% Wastage
Net Content in Export Product +
1% Wastage
Net + 1% wastage
0.007 gms/100 nos. of Syringes
As per Packing Policy
Meet No/Date:40/87-
Status:Approved
67
ALC1/2007
MEDICAL DEVICES PVT
LTD
ALC1/2007
13.02.2008
HQ File
:01/87/050/00903/AM07/
RLA File
:04/24/040/00409/AM07/
Lic.No/Date:0410086967 Defer Date:
17.01.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
2
EXPORT ITEM
63/0SOLOGUARD
BRAND SINGLE
USE 2ML
SYRINGES WITH
NEEDLE
63/0SOLOGUARD
BRAND SINGLE
USE 5ML
SYRINGES WITH
NEEDLE
Qty
UOM
FOB (Rs.)
3500000.000 Number 2992500.00
66500.00
US$
5000000.000 Number 4612500.00
102500.00
US$
Total
Sl.No.
1
2
3
4
5
6
7
FOB
(Currency)
IMPORT ITEM
HIGH DENSITY
POLYETHELENE
GENERAL PURPOSE
INJECTION MOULDING
GRADE
POLYPROPYLENE
RANDOM COPOLYMER
INJECTION MOULDING
GRADE
BULK DISPOSABLE
NEEDLES UNSTERILED
PAPER 60GSM
BLEACHED
PAPER 180GSM
BLEACHED
LDPE PLASTIC FILM
NATURAL
COATED WHITE BOARD
Qty
7,605,000.00
UOM
169,000.00
CIF
CIF (Rs.)
(Currency)
12814.950
K.G
663173.66
14737.19
US$
13832.650
K.G
784311.26
17429.14
US$
8500000.000 Number
2677500.00
2595.500
K.G
233595.00
5037.500
K.G
340031.25
3229.500
K.G
290655.00
10039.000
K.G
293640.75
59500.00
US$
5191.00
US$
7556.25
US$
6459.00
US$
6525.35
US$
68
8
PRIINTING INK BLACK
GRAVURE
0.595
K.G
321.30
7.14 US$
Total
5,283,228.22 117,405.07
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM
Disposable
2ml/5ml Syringes
With Needle
QTY
IMPORT ITEM
1 kg 1. HDPE Granules
2. Polypropylene
Granules
3. Relevant Needles
4. Printing Ink
5. Packing material
QTY
Net Content in Export Product +
1% Wastage
Net Content in Export Product +
1% Wastage
Net + 1% wastage
0.007 gms/100 nos. of Syringes
As per Packing Policy
Case No.:580/24/87ALC1/2007
Party Name:S.P.SINHA & CO. Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00905/AM07/
RLA File
:02/24/040/00289/AM07/
Status:Approved
Lic.No/Date:0210097380 Defer Date:
17.01.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
Qty
UOM FOB (Rs.)
63/0- HIGH TEMPERATURE
RESISTANT COATING MATERIAL 200.000
RED
28
Sl.No. IMPORT ITEM
8009789 SILIKOFTAL HTL3
1
SILICONE POLYESTER RESIN
Qty
K.G
FOB
(Currency)
112965.00 2550.00 US$
Total 112,965.00 2,550.00
UOM CIF (Rs.) CIF (Currency)
119.720 K.G
75000.00 1602.00 US$
Total 75,000.00 1,602.00
Decision: With D/o C&PC OM No. 46011/29/2004-PC.II dated 08.09.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
High Temperature Resistant 1 kg
Coating
Material
IMPORT ITEM
Relevant Polyester
Resin
QTY
Net Content in Export
Product + 2% Wastage
69
Red
Case No.:592/24/87ALC1/2007
Party Name:SHAILY
ENGINEERING PLASTIC
LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00915/AM07/
RLA File
:34/24/040/00240/AM07/
Lic.No/Date:3410017930 Defer Date:
22.01.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
Sl.No.
FOB
(Currency)
45602.20
9524.000 K.G 2052099.15
US$
Total 2,052,099.15
45,602.20
CIF
Qty
UOM
CIF (Rs.)
(Currency)
EXPORT ITEM
Qty
63/0- Articles Made Of
Polyphenylene Oxide
IMPORT ITEM
30
1
Glass Reinforced Modified
Poyphenylene Oxide (PPO)
Compound
UOM
FOB (Rs.)
10000.000 K.G
Total
1800036.00
40000.80
US$
1,800,036.00 40,000.80
Decision: With D/o C&PC OM No. 46011/105/2004-PC.II dated 21.02.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
Articles
Made
of 1 kg
Polyphenylene Oxide
Case No.:608/24/87ALC1/2007
HQ File
33 :01/87/050/00933/AM07/
IMPORT ITEM
20% Glassfiber Reinforced
Modified Polyphenylene
Oxide
QTY
Net Content in Export
Product + 5% Wastage
Party Name:SOLOGUARD
MEDICAL DEVICES PVT
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00418/AM07/
Lic.No/Date:0410087200 Defer Date:
29.01.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
70
(Currency)
1
2
3
Sl.No.
63/0- SOLOGUARD BRAND
SINGLE USE 2ML SYRINGES 840000.000 Number 457380.00
WITHOUT NEEDLE
63/0- SOLOGUARD BRAND
SINGLE USE 5ML SYRINGES 725000.000 Number 440437.50
WITHOUT NEEDLE
63/0- SOLOGUARD BRAND
SINGLE USE 10ML
90000.000 Number 98010.00
SYRINGES WITHOUT
NEEDLE
Total 995,827.50
IMPORT ITEM
Qty
UOM
3
HIGH DENSITY POLYETHELENE
GENERAL PURPOSE INJECTION 2477.938 K.G
MOULDING GRADE
POLYPROPYLENE RANDOM COPOLYMER INJECTION
2727.361 K.G
MOULDING GRADE
PAPER 60GSM BLEACHED
497.370 K.G
4
PAPER 180GSM BLEACHED
1024.725 K.G
5
LDPE PLASTIC FILM NATURAL
641.800
6
COATED WHITE BOARD
1972.085 K.G
7
PRINTING INK BLACK GRAVURE 0.116
1
2
K.G
K.G
Total
10164.00
US$
9787.50 US$
2178.00 US$
22,129.50
CIF
CIF (Rs.)
(Currency)
128233.29
2849.63
US$
154641.37
3436.47
US$
44763.30
994.74 US$
1537.09
69168.94
US$
1283.60
57762.00
US$
1281.86
57683.49
US$
62.56
1.39 US$
512,314.95 11,384.78
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
Disposable 2ml/5ml/10 1 kg
ml Syringes Without
Needle
IMPORT ITEM
1. HDPE Granules
2. Polypropylene
Granules
3. Printing Ink
4. Packing material
QTY
Net Content in Export
Product + 1% Wastage
Net Content in Export
Product + 1% Wastage
0.007 gms/100 nos. of
Syringes
As per Packing Policy
71
Case No.:627/24/87ALC1/2007
Party Name:SOLOCARE
Meet No/Date:40/87MEDICALS PRIVATE LTD., ALC1/2007
13.02.2008
HQ File
:01/87/050/00965/AM07/
RLA File
:04/24/040/00431/AM07/
Status:Approved
Lic.No/Date:0410087403 Defer Date:
07.02.2007
Application: Request is for adhoc norms for following:
FOB
(Currency)
63/0- 2ml syringes
14529.90
1
770000.000
Number 653845.50
with needle
US$
63/0- 5ml syringes
18870.00
2
925000.000
Number 849150.00
with needle
US$
Total
1,502,995.50
33,399.90
CIF
Sl.No.
IMPORT ITEM
Qty
UOM
CIF (Rs.)
(Currency)
high density polyethylene
2872.28
1
general purpose injection
2497.640
K.G
129252.82
US$
moulding grade
polypropelene random
37
3423.18
2
copolymer injection moulding 2716.810
K.G
154043.01
US$
grade
Bulk disposable needles
11865.00
3
1695000.000 Number 533925.00
unsterlised
US$
4
paper-60gsm bleached
511.160
K.G
40713.89
904.75 US$
5
paper 180gsm unbleached
990.130
K.G
44555.63
990.13 US$
1277.48
6
LDPE plastic film natural
638.740
K.G
57486.60
US$
1288.73
7
Coated white board
1982.660
K.G
57992.66
US$
Total
1,017,969.61 22,621.55
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
adhoc norms are approved:
EXPORT ITEM
Disposable 2ml/5ml
Syringes With Needle
QTY
1 kg
IMPORT ITEM
1. HDPE Granules
2. Polypropylene
QTY
Net Content in Export
Product + 1% Wastage
Net Content in Export
72
Granules
3. Relevant Needles
4. Packing material
Product + 1% Wastage
Net + 1% wastage
As per Packing Policy
Case No.:628/24/87ALC1/2007
Party Name:SOLOCARE
Meet No/Date:40/87MEDICALS PRIVATE LTD., ALC1/2007
13.02.2008
HQ File
:01/87/050/00966/AM07/
RLA File
:04/24/040/00432/AM07/
Status:Approved
Lic.No/Date:0410087406 Defer Date:
07.02.2007
Application: Request is for adhoc norms for following:
FOB
(Currency)
63/0- 2ml syringes
13468.00
1
728000.000
Number 606060.00
with needle
US$
63/0- 5ml syringes
96500.00
2
4825000.000
Number 4342500.00
with needle
US$
Total
4,948,560.00
109,968.00
CIF
Sl.No.
IMPORT ITEM
Qty
UOM
CIF (Rs.)
(Currency)
High density polyethylene
11065.69
general purpose injection
9622.340
K.G
497956.07
38 1
US$
moulding grade
Polypropelene random
12519.63
2
copolymer injection moulding 9936.220
K.G
563383.46
US$
grade
Bulk disposable needles
38871.00
3
5553000.000 Number 1749195.00
unsterlised
US$
3246.77
4
paper 60gsm bleached
1834.330
K.G
146104.70
US$
3602.68
5
paper 180gsm unbleached
3602.680
K.G
162120.38
US$
4447.17
6
LDPE plastic film natural
2223.590
K.G
200122.74
US$
4533.46
7
coated white board
6974.550
K.G
204005.50
US$
Total
3,522,887.85 78,286.40
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
Decision: With D/o C&PC OM No. 46011/168/2003-PC.II dated 27.04.2006, following
73
adhoc norms are approved:
EXPORT ITEM
Disposable 2ml/5ml
Syringes With Needle
QTY
1 kg
IMPORT ITEM
1. HDPE Granules
QTY
Net Content in Export
Product + 1% Wastage
Net Content in Export
Product + 1% Wastage
Net + 1% wastage
As per Packing Policy
2. Polypropylene
Granules
3. Relevant Needles
4. Packing material
Case No.:666/24/87ALC1/2007
Party
Name:PLASTICHEMIX
INDUSTRIES
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00996/AM07/
RLA File
:34/24/040/00250/AM07/
Lic.No/Date:3410018075 Defer Date:
12.02.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
1
2
3
UOM
63/0- LLDPE MASTER
BATCHES
(CONTAINING 25 % OF
LLDPE 12650 Kgs ,50 %
50600.000
TITANIUM DIOXIDE 25300
Kgs , & 25 % 12650
CALCIUM CARBONATE
40
Sl.No.
Qty
K.G
FOB (Rs.)
3486670.00
FOB
(Currency)
60115.00
EURO
Total 3,486,670.00 60,115.00
UOM CIF (Rs.)
CIF (Currency)
IMPORT ITEM
Qty
LLDPE GRANUAL
having specific gravity of less 13029.500 K.G
than 0.94
Titanium Dioxide
26059.000 K.G
Calcium Carbonate
13029.500 K.G
Total
734863.80
15635.40 US$
2449546.00 52118.00 US$
153096.63 3257.38 US$
3,337,506.43 71,010.78
Decision: With D/o C&PC OM No. 46011/31/2005-PC.II dated 19.07.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
White
Master
Batch 1 kg
(containing 25% LLDPE, 50%
IMPORT ITEM
1. LLDPE Granules
2. Titanium Dioxide
QTY
0.2575 kg
0.5150 kg
74
Titanium Dioxide and 25%
Calcium Carbonate)
3. Calcium Carbonate
0.2575 kg
Case No.:703/24/87ALC1/2007
Party Name:SHAKUN
POLYMERS LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/01035/AM07/
RLA File
:34/24/040/00262/AM07/
Lic.No/Date:3410018119 Defer Date:
20.02.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
UOM
FOB
(Currency)
FOB (Rs.)
63/0- LINEAR LOW
DENSITY CROSSLINKABLE
66000.000 K.G 5034150.00
POLYETHYLENE
COMPOUND
Total 5,034,150.00
Sl.No.
45
Qty
IMPORT ITEM
Qty
UOM
111870.00
US$
111,870.00
CIF
CIF (Rs.)
(Currency)
1
LINEAR LOW DENSITY
POLYEHTYLENE (LLDPE)
GRANNULES
57750.000 K.G
3833156.00
2
LLDPE MASTER BATCH
6600.000 K.G
683100.00
3
SILANE
1320.000 K.G
Total
85181.00
US$
15180.00
US$
8580.00
386100.00
US$
4,902,356.00 108,941.00
Decision: With D/o C&PC OM No. 46011/100/2005-PC.II dated 22.11.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
Linear
Low
Density 1 kg
Crosslinkable Polyethylene
Compound
46
IMPORT ITEM
1. Linear Low Density
Polyethylene (LLDPE)
Granules
2. LLDPE Masterbatch
3. Silane
Case No.:707/24/87ALC1/2007
Party Name:PLASTICHEMIX Meet No/Date:40/87INDUSTRIES
ALC1/2007
13.02.2008
HQ File
RLA File
QTY
0.875 kg
0.100 kg
0.020 kg
Status:Approved
Lic.No/Date:3410018137 Defer Date:
75
:01/87/050/01042/AM07/
:34/24/040/00264/AM07/
21.02.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
63/0- LLDPE Masterbatch
Super White
(Containing 25% LLDPE,50%
10000.000
TITANIUM DIOXIDE AND 25%
CALCIUM CARBONATE)
Sl.No.
1
2
3
Qty
IMPORT ITEM
Qty
LLDPE Granules.
having specific gravity of less than
0.94
Titanium Dioxide
Calcium Carbonate
UOM FOB (Rs.)
K.G
890000.00
FOB
(Currency)
890000.00
Indian Rupees
Total 890,000.00 890,000.00
CIF
UOM CIF (Rs.)
(Currency)
2575.000 K.G
4120.00
181280.00
US$
5150.000 K.G 498520.00 11330.00 US$
2575.000 K.G 113300.00 2575.00 US$
Total 615,940.00 195,185.00
Decision: With D/o C&PC OM No. 46011/31/2005-PC.II dated 19.07.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
White Master Batch 1 kg
(containing
25%
LLDPE, 50% Titanium
Dioxide
and
25%
Calcium Carbonate)
Case No.:7/5/87ALC1/2007
47 HQ File
:01/87/050/01054/AM07/
IMPORT ITEM
1. LLDPE Granules
2. Titanium Dioxide
3. Calcium Carbonate
QTY
0.2575 kg
0.5150 kg
0.2575 kg
Party Name:DIVINE
POLYMER PRODUCTS
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/94/040/01319/AM07/
Lic.No/Date:0310420735 Defer Date:
23.02.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
48 Case No.:8/5/87-
Party Name:DIVINE
Meet No/Date:40/87-
Status:Approved
76
ALC1/2007
POLYMER PRODUCTS
LIMITED
ALC1/2007
13.02.2008
HQ File
:01/87/050/01055/AM07/
RLA File
:03/94/040/01142/AM07/
Lic.No/Date:0310420736 Defer Date:
23.02.2007
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:755/24/87ALC1/2007
Party Name:HALDIA
Meet No/Date:40/87PETROCHEMICALS LTD. ALC1/2007
13.02.2008
HQ File
:01/87/050/01098/AM07/
RLA File
:02/24/040/00355/AM07/
Status:Approved
Lic.No/Date:0210099010 Defer Date:
13.03.2007
Application: Request is for adhoc norms for following:
FOB
(Currency)
1
63/0- Polypropylene 770.000 M.T 43472000.00
949235.00 US$
Total 43,472,000.00
949,235.00
CIF
Sl.No.
IMPORT ITEM
Qty
UOM
CIF (Rs.)
(Currency)
735157.50
1
Naptha
980.210 M.T
33667919.00
US$
Catalyst (ZN GF2A-1H, Lynx
1010 HA, Donor -C, Donor 86486.40
2
320.320 K.G
3960807.00
D, TEAL, ZN 111-4,
US$
53
ZNM1,ZN 118)
Additives (ATMER 63,
Crodamide ER, PEPQ,
Syloblock 45 H, Calcuim
6737.50
3
Sterate, Glycol Mono
1925.000 K.G
308556.00
US$
Stearate, Nalco-39M,
Sodium BENZOATE, GMS
40, Hyperform HPN)
Anti-oxidants (DHT 4A,
Irganox 1010, Irganox 1076,
7271.50
4
1322.090 K.G
333012.00
Irgafos 168, DSTDP, Irganox
US$
1330)
Total
38,270,294.00 835,652.90
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
Decision: With D/o C&PC OM No. 46011/260/2004-PC.II dated 9/12.3.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
QTY
77
Polypropylene
1 MT 1. Naphtha
(Homopolymer)/Granules
2. Catalyst (ZN GF2A-1H/ Lynx 1010
HA/ Donor-C/ Donor-D/ TEAL/ ZN
111-4/ ZNM1/ZN 118
3. Anti-oxidants (DHT 4A/ Irganox
1010/ Irganox 1076/ Irgafos 168/
DSTDP/ Irganox 1330)
4. Additives (ATMER 63/ Crodamide
ER/ PEPQ/ Syloblock 45 H/ Calcium
Stearate/ Glycol Mono Stearate/
Nalco-39M/ Sodium BENZOATE/
GMS 40/ Hyperform HPN)
Case No.:9/6/87ALC1/2007
60 HQ File
:01/87/050/01146/AM07/
1.273 MT
0.416 kgs
1.717 kgs
2.500 kgs
Party Name:RENATA
PLASTICS
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:31/24/040/00439/AM07/
Lic.No/Date:3110028753 Defer Date:
27.03.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:32/8/87ALC1/2007
67 HQ File
:01/87/050/00014/AM08/
Party Name:WELSET
PLAST EXTRUSIONS
PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/95/040/01133/AM07/
Lic.No/Date:0310426208 Defer Date:
10.04.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:5/24/87ALC1/2007
Party Name:HALDIA
PETROCHEMICALS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00018/AM08/
RLA File
:02/24/040/00007/AM08/
Lic.No/Date:0210099933 Defer Date:
12.04.2007
Status:Approved
Application: Request is for adhoc norms for following:
69
Sl.No.
1
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- HDPE (High
Density Polyethylene)
granules/ LLDPE (Linear 14800.000 M.T 844636000.00
Low Density
Polyethylene) granules
Total 844,636,000.00
FOB
(Currency)
19240000.00
US$
19,240,000.00
78
Sl.No.
1
2
3
4
5
IMPORT ITEM
Naptha
Solvent
Exxsol Hexane RD
Catalyst (Lynx - 1010
HA, Z 212, Z 213, PZ
Catalyst, RZ 200
Catalyst,
Donor-C, TEAL, HS
Catalyst, Z-230-1,
TIBAL, THF Catalyst)
Additives ( ATMER 163,
DLTP/PS-800,
Crodamide ER, Sylobloc
45H, Optibloc 10,
LDPE/Lotrene, Kynerflex
2821,
Viton GB Free Flow/
VGBSARZ100/200,
Tinuvin 783
FDL,Calcium stearate,
Octeal 9-10, ZN Stearate,
GMS-40/90, Viton Sarz100/200)
Anti-oxidants (DHT
4A/HYCITE, Anox PP 18,
Irganox 1010/KINOX10/EU-10, Irganox 1076/
Kinox-76/EU-76,
Irgafos 168/EU-68/ K-68,
Irganox 3114, PEPQ,
Ultranox 626, DSTDP,
Irganox 20)
Qty
UOM
CIF
(Currency)
16221225.00
712111775.00
US$
111000.00
4872900.00
US$
CIF (Rs.)
33576.000
M.T
222000.000
K.G
6808.000
K.G
80695224.00
1838160.00
US$
92870.000
K.G
30017064.00
683760.00
US$
35520.000
K.G
8576304.00
195360.00
US$
Total
836,273,267.00 19,049,505.00
Decision: With D/o C&PC vide OM No. 46011/136/2002-PC.II dated 09/12.03.2007,
following adhoc norms are approved:
EXPORT ITEM
LLDPE/HDPE
Granules
QTY
1 MT
IMPORT ITEM
1. Naphtha
2. Solvent (Exxsol Hexane RD/ NHexane/ Cyclohexane)
QTY
2268.64 kg
15 kg
79
3. Catalysts (Lynx-1010 HA/ Z
212/ Z 213/ PZ Catalyst/ RZ 200
Catalyst/ Donor-C/ TEAL/ HS
Catalyst/ Z-230 -1/ TIBAL/ THF
Catalyst)
4. Additives (ATMER 163/ DLTP/
PS-800/ Crodamide ER/
Sylobloc 45H/ Optibloc 10/
LDPE/ Lotrene/ Kynerflex 2821/
Viton GB Free flow/ VGBSARZ 100/200/ Tinuvin783
FDL/ Calcium Stearate/ Octeal
9-10/ ZN Stearate/ GMS-40/90/
Viton Sarz-100/200)
5. Anti-oxidants (DHT 4A/
HYCITE/ Anox PP18/ Irganox
1010/ KINOX-10/ EU 10/
Irganox 1076/ kinox 76/ eu-76/
Irgafos 168/ EU-68/ K-68/
Irganox 3114/ PEPQ/ Ultranox
626/ DSTDP/ Irganox 20)
Case No.:6/24/87ALC1/2007
Party
Meet No/Date:40/87Name:PADMANABH
ALC1/2007
ALLOYS & POLYMERS 13.02.2008
LTD
0.46 kg
6.275 kg
2.40 kg
Status:Approved
HQ File
RLA File
Lic.No/Date:5210021445 Defer Date:
:01/87/050/00020/AM08/ :52/80/040/00001/AM08/ 12.04.2007
Application: Request is for adhoc norms for following:
Sl.No.
70
1
EXPORT ITEM
63/0- 60% MINERAL
FILLED PPHP
COMPOUND GRADE P
1260 X T/C (
CONTAINING 40 +/- 1%
PPHP).
Qty
UOM
22000.000 K.G
FOB (Rs.)
572130.00
Total 572,130.00
Sl.No.
1
IMPORT ITEM
POLYPROPYLENE
FOB
(Currency)
12714.00
US$
12,714.00
CIF
Qty
UOM CIF (Rs.)
(Currency)
8800.000 K.G
501600.00 11146.66
80
2
HOMOPOLYMER
(PPHP)GRANULES.
CALCICUM CARBONATE.
US$
9064.000 K.G
Total
27192.00 604.26 US$
528,792.00 11,750.92
Decision: With D/o C&PC OM No. 46011/162/2006-PC.II dated 15.12.2006,
following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
60% Mineral Filled 1 kg 1. Polypropylene
PPHP
Compound
Homopolymer (PPHP)
Grade: P 1260 XT/C
Granules
(containing 40 +/- 1%
2. Calcium Carbonate
PPHP)
QTY
0.400 kg
0.412 kg
Case No.:8/24/87ALC1/2007
Party Name:VISEN
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00026/AM08/
RLA File
:03/95/040/01600/AM07/
Lic.No/Date:0310426802 Defer Date:
16.04.2007
Status:Approved
Decision : Application: Request is for adhoc norms for following:
Sl.No.
1
73
EXPORT ITEM
Qty
63/0- STYRENE - ACRYLATE
EMULSION (SOLID
768.000
CONTENT 50% +/- 1%)
VISICRYL - 7500
UOM
M.T
FOB (Rs.)
32772096.00
FOB
(Currency)
737280.00
US$
Total 32,772,096.00
737,280.00
Sl.No.
IMPORT ITEM
Qty UOM CIF (Rs.)
CIF (Currency)
1
2 ETHYL HEXYL ACRYLATE 166.656 M.T 13111910.78 294981.12 US$
2
STYRENE MONOMER
198.144 M.T 11273601.02 253624.32 US$
3
METHYL METHACRYLATE 0.768 M.T 68275.20
1536.00 US$
4
METHACRYLIC ACID
3.840 M.T 443788.80
9984.00 US$
5
GLACIAL ACRYLIC ACID
3.840 M.T 273100.80
6144.00 US$
6
ACRYLAMIDE
3.840 M.T 319186.56
7180.80 US$
7
METHACRYLAMIDE
3.840 M.T 733958.40
16512.00 US$
8
POTASSIUM PER SULPHATE 0.768 M.T 61447.68
1382.40 US$
9
HM HDPE GRANULES
28.560 M.T 1777288.80 39984.00 US$
81
Total 28,062,558.04 631,328.64
Decision: With D/o C&PC OM No. 46011/10/2005-PC.II dated 21.11.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
Styrene Acrylate Emulsion 1 kg
(Solid Content 50% +/- 1%)
1.
2.
3.
4.
5.
6.
7.
8.
9.
IMPORT ITEM
2 Ethyl Hexyl Acrylate
Styrene Monomer
Methyl Methacrylate
Methacrylic Acid
Glacial Acrylic Acid
Acrylamide
Methacrylamide
Potassium Per Sulphate
HM HDPE Granules
QTY
0.212 kg
0.252 kg
0.001 kg
0.005 kg
0.005 kg
0.005 kg
0.005 kg
0.001 kg
As per
Packing
Policy
Case No.:31/24/87ALC1/2007
Party Name:SHAKUN
POLYMERS LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00056/AM08/
RLA File
:34/24/040/00021/AM08/
Lic.No/Date:3410018681 Defer Date:
27.04.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
78
EXPORT ITEM
Qty
UOM
63/0THERMOPLASTIC
SEMICONDUCTING
COMPOUND (
360000.000
CONTAINING 52.50+/1% EVA , 29+/-1%
CARBON BLACK AND
18 +/- 1% HDPE )
Sl.No.
IMPORT ITEM
1
CARBON BLACK
ETHYLENE VINYL
2
ACETATE ( EVA )
HIGH DENSITY
3
POLYETHYLENE (
HDPE )
K.G
FOB (Rs.)
30495600.00
FOB
(Currency)
709200.00
US$
Total 30,495,600.00 709,200.00
Qty
UOM
CIF (Rs.)
CIF (Currency)
104400.000 K.G
8080560.00 187920.00 US$
192600.000 K.G
16563600.00 385200.00 US$
66600.000 K.G
4295700.00
Total
99900.00 US$
28,939,860.00 673,020.00
82
Decision: With D/o C&PC OM No. 46011/210/2004-PC.II dated 10.02.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
Thermoplastic
1 kg
Semiconducting Compound
(containing 52.5 +/- 1%
EVA, 29 +/-1% Carbon
Black and 18 +/- 1% HDPE )
IMPORT ITEM
1. Carbon Black
2. Ethylene Vinyl Acetate Resin
3. HDPE Granules
QTY
0.290 kg
0.535 kg
0.185 kg
Case No.:47/24/87ALC1/2007
Party Name:ATUL
LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00069/AM08/
RLA File
:08/24/040/00024/AM08/
Lic.No/Date:0810064560 Defer Date:
01.05.2007
Status:Approved
Application: Request is for adhoc norms for following:
FOB
(Currency)
62/0- REACTIVE
256000.00
1
80000.000 K.G 11776000.00
POLYAMIDE RESIN
US$
Total 11,776,000.00
256,000.00
CIF
Sl.No.
IMPORT ITEM
Qty
UOM
CIF (Rs.)
(Currency)
80
93380.00
1
DIMER ACID
53360.000 K.G
4295480.00
US$
126436.00
2
TRIETHYLENE TETRAMINE 34640.000 K.G
5816056.00
US$
Total
10,111,536.00 219,816.00
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
Decision: With D/o C&PC OM No. 46011/97/2007-PC.II dated 17.08.2007, following
adhoc norms are approved:
EXPORT ITEM
Reactive Polyamide Resin
81 Case No.:11/10/80-
QTY
1 kg
IMPORT ITEM
1. Dimer Acid
2. Triethylene Tetramine
Party Name:GARWARE
Meet No/Date:40/87-
QTY
0.667 kg
0.433 kg
Status:Approved
83
ALC2/2007
WALL ROPES LTD.,
ALC1/2007
13.02.2008
HQ File
:01/80/050/00074/AM08/
RLA File
:31/24/040/00002/AM08/
Lic.No/Date:3110029120 Defer Date:
03.05.2007
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:3/12/87ALC1/2007
82 HQ File
:01/87/050/00077/AM08/
Party Name:POLYPLEX
CORPORATION LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00015/AM08/
Lic.No/Date:0510203201 Defer Date:
03.05.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:59/24/87ALC1/2007
Party Name:PODDAR
MERCANTILE
PVT.LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00083/AM08/
RLA File
:02/24/040/00031/AM08/
Lic.No/Date:0210100540 Defer Date:
04.05.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
63/0- HDPE bags
(shopping bags / T shirt bags)
Qty
UOM
400.000 M.T
FOB (Rs.)
29365000.00
FOB
(Currency)
700000.00
US$
Total 29,365,000.00
Sl.No.
IMPORT ITEM
Qty
UOM
83
1
HDPE granules
412.000 M.T
2
Relevant PE master batch/
Colour Master batches
20.000 M.T
Total
700,000.00
CIF
CIF (Rs.)
(Currency)
552080.00
23159756.00
US$
40000.00
1678000.00
US$
24,837,756.00 592,080.00
Decision: With D/o C&PC OM No. 46011/106/2006-PC.II dated 28.02.2007,
following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
HDPE Bags (Shopping 1
1. HDPE Granules
Bags/T-shirt Bags)
MT
2. Relevant PE
Masterbatch/Colour Master
Batch
QTY
1.03 MT
0.05 MT
84
Case No.:8/10/87ALC1/2007
85 HQ File
:01/87/050/00092/AM08/
Party Name:DIVINE
POLYMER PRODUCTS
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/94/040/00056/AM08/
Lic.No/Date:0310429003 Defer Date:
10.05.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:75/24/87ALC1/2007
Party Name:HALDIA
Meet No/Date:40/87PETROCHEMICALS LTD. ALC1/2007
13.02.2008
HQ File
:01/87/050/00096/AM08/
RLA File
:02/24/040/00044/AM08/
Status:Approved
Lic.No/Date:0210100799 Defer Date:
15.05.2007
Application: Request is for adhoc norms for following:
Sl.No. EXPORT ITEM
Qty
63/0- Motor
1
25000.000
Sprit
UOM
FOB (Rs.)
FOB (Currency)
14375000.00
M.T
602312500.00
US$
Total 602,312,500.00
14,375,000.00
89
Sl.No. IMPORT ITEM
Qty
UOM
CIF (Rs.)
CIF (Currency)
1
Naptha
18350.000 M.T
561271450.00 13395500.00 US$
Total 561,271,450.00 13,395,500.00
Decision: With D/o C&PC OM No. 46011/24/2003-PC.II dated 07.03.2007, following
adhoc norms are approved:
EXPORT ITEM
Motor Sprit
90
QTY
IMPORT ITEM
1 MT Naphtha
QTY
0.734 MT
Case No.:77/24/87ALC1/2007
Party Name:ATUL
LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00099/AM08/
RLA File
:08/24/040/00004/AM08/
Lic.No/Date:0810064853 Defer Date:
16.05.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
(Currency)
85
1
Sl.No.
1
2
3
4
62/0- HARDENER
LAPOX EC
780000.00
US$
Total 35,880,000.00
780,000.00
CIF
Qty
UOM
CIF (Rs.)
(Currency)
92948.00
45900.000 K.G
4275585.00
US$
14045.00
52800.000 K.G
646061.00
US$
601500.00
240600.000 K.G
27669000.00
US$
45150.00
21000.000 K.G
2076900.00
US$
Total
34,667,546.00 753,643.00
300000.000
IMPORT ITEM
EPICHLOROHYDRIN
CRESOL (ORTHO
CRESOL)
HEXAHYDROPTHALIC
ANHYDRIDE
TETRAHYDROPTHALIC
ANHYDRIDE
K.G
35880000.00
Decision: With D/o C&PC OM No. 46011/109/2007-PC.II dated 06.09.2007, following
adhoc norms are approved:
EXPORT ITEM
Hardener Lapox EC
QTY
1 kg 1.
2.
3.
4.
IMPORT ITEM
Epichlorohydrin
Cresol (Ortho Cresol)
Hexahydropthalic Anhydride
Tetrahydrophthalic Anhydride
QTY
0.153 kg
0.176 kg
0.802 kg
0.070 kg
Case No.:79/24/87ALC1/2007
Party Name: RUSHIL
DECOR PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00100/AM08/
RLA File
:08/81/040/00319/AM05/
Lic.No/Date:0810064857 Defer Date:
16.05.2007
Status:Approved
Application: Request is for adhoc norms for following:
91
Sl.No.
1
EXPORT ITEM
Qty
UOM
63/0- Single side
Decorative Laminate
Cladded withn
Sq.
15434.700
Aluminium Foil
meter
(thickness 0.8mm,weight
1.679kg(+)(-
FOB (Rs.)
6416783.00
FOB
(Currency)
143506.21
US$
86
)2.5%/Sq.Mtr.)
Total
Sl.No.
IMPORT ITEM
Qty
6,416,783.00
UOM
1
Kraft Paper
9121.910 K.G
2
Aluminium Foil (Thickness
100 micron)
5695.400 K.G
3
Phenol
3966.720 K.G
4
Paraformaldehyde (Purity
91+/- 1%)
1960.200 K.G
Total
143,506.21
CIF
CIF (Rs.)
(Currency)
4925.22
218926.00
US$
123005.42
5467591.00
US$
6246.80
277670.00
US$
1146.58
50965.00
US$
6,015,152.00 135,324.02
Decision: With D/o C&PC OM No. 46011/101/2006-PC.II dated 26.12.2006,
following adhoc norms are approved:
EXPORT ITEM
QTY
Single Side Decorative 1 Sq.
Laminate Cladded with Mtr.
Aluminium
Foil
(Thickness 0.8mm Weight
1.679 kg +/- 2.5%/Sq.Mtr.)
IMPORT ITEM
1. Kraft Paper
2. Phenol
3. Paraformaldehyde (Purity
91 +/- 1%)
4. Aluminium Foil
(Thickness 100 micron)
QTY
0.591 kg
0.257 kg
0.127 kg
0.369 kg
Case No.:82/24/87ALC1/2007
Party Name:RALSON
INDUSTRIES LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00101/AM08/
RLA File
:05/24/040/00116/AM08/
Lic.No/Date:0510203715
16.05.2007
Defer Date:
Application: Request is for adhoc norms for following:
92
Sl.No. EXPORT ITEM
1
Sl.No.
1
62/0- Bicycle
Tubes
Qty
347200.000
UOM
FOB (Rs.)
K.G
24477600.00
Total
24,477,600.00
IMPORT ITEM
Sythentic Rubber (SBR-1502,1712)
Qty
UOM
127075.200 K.G
FOB
(Currency)
582800.00 US$
582,800.00
CIF
CIF (Rs.)
(Currency)
9606885.12 228735.36
87
2
Natural Rubber
69440.000 K.G
6124608.00
3
Carbon Black
73953.600 K.G
2795446.08
4
Rubber Chemicals
(Antioxidants,Accelerators,Retareders 6596.800
and Peptizer)
5
K.G
1385328.00
Zinc Oxide
13193.600 K.G
1274501.76
6
Stearic Acid
347.200
7
Brass Scrap
13193.600 K.G
K.G
Total
QTY
1 kg
(excluding
weight of
valve)
Case No.:7/19/87ALC1/2007
93 HQ File
:01/87/050/00098/AM08/
32984.00
US$
30345.28
US$
347.20
14582.40
US$
52774.40
2216524.80
US$
23,417,876.16 557,568.48
Decision: With DIPP letter dated 13.02.2008, following adhoc norms are approved:
EXPORT
ITEM
Bicycle Tubes
US$
145824.00
US$
66558.24
US$
IMPORT ITEM
QTY
1. Synthetic Rubber (PBR/SBR1502/1712)
2. Natural Rubber
3. Carbon Black
4. Rubber Chemicals
(Antioxidants, Accelerators,
Retarders and Peptizer)
5. Zinc Oxide
6. Stearic Acid
7. Brass Scrap
0.086 kg
0.510 kg
0.183 kg
0.019 kg
0.038 kg
0.001 kg
0.038 kg
Party Name:DHARIYAL
CHEMICALS
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:08/24/040/00038/AM08/
Lic.No/Date:0810064849 Defer Date:
16.05.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 39/08 dated 06.02.2008.
88
Case No.:87/24/87ALC1/2007
Party Name:MACRO
POLYMERS P. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00104/AM08/
RLA File
:08/24/040/00023/AM08/
Lic.No/Date:0810064901 Defer Date:
17.05.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1.
Sl.No.
1.
2.
3.
94
4.
EXPORT ITEM
Alkyd Resin S-5060 (70% Resin Content)
IMPORT ITEM
Soya Fatty Acid
Phthalic Anhydride
Pentaerythritol
Long Oil Alkyd Solution 30% Solid
Qty
34890.000 kg
Qty
11618.000 kg
5094.000 kg
4431.000 kg
15980.000 kg
Decision: With D/o C&PC OM No. 46011/246/2004-PC.II dated 11.01.2008,
following adhoc norms are approved:
EXPORT ITEM
Alkyd Resin S-5060
(70% Resin Content)
QTY
1 kg 1.
2.
3.
4.
IMPORT ITEM
Soya Fatty Acid
Phthalic Anhydride
Pentaerithirtol
Long Oil Alkyd Resin Solution
(10% Solid Content)
QTY
0.387 kg
0.169 kg
0.149 kg
0.358 kg
Case No.:20/12/87-ALC1/2007 Party Name:METALIKA
PRODUCTS (I) PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00135/AM08/
Lic.No/Date:3110029376 Defer Date:
31.05.2007
RLA File
:31/24/040/00067/AM08/
Status:Approved
Application: Request is for adhoc norms for following:
97
Sl.No.
EXPORT ITEM
1
63/0- FUSE POCKET
Sl.No.
1
IMPORT ITEM
VORATRON ED 224
L
POLYOL
Qty UOM
FOB (Rs.)
FOB (Currency)
1.850 K.G 5882400.00
147060.00 US$
Total 5,882,400.00
147,060.00
Qty
UOM
CIF (Rs.) CIF (Currency)
10500.000
K.G
1828575.00 42525.00 US$
89
2
VORATRON ED 213
ISOCYANATE
5250.000
K.G
914288.00
21263.00 US$
Total
2,742,863.00 63,788.00
Decision: With D/o C&PC OM No. 46011/242/2004-PC.II dated 09.06.2005, following adhoc
norms are approved:
EXPORT ITEM
Fuse Pocket made
Polyurethane
Case No.:3/18/87ALC1/2007
100 HQ File
:01/87/050/00139/AM08/
QTY
of 1 kg
IMPORT ITEM
1. Polyol (Voratron ED-224)
2. Isocyanate (Voratron ED-213)
Party Name:ESTER
INDUSTRIES LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00033/AM08/
Lic.No/Date:0510204502 Defer Date:
05.06.2007
QTY
0.733 kg
0.367 kg
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:111/24/87ALC1/2007
Party Name:E I DUPONT Meet No/Date:40/87INDIA PVT LIMITED
ALC1/2007
13.02.2008
HQ File
:01/87/050/00145/AM08/
RLA File
:34/24/040/00274/AM07/
Status:Approved
Lic.No/Date:3410018941 Defer Date:
08.06.2007
Application: Request is for adhoc norms for following:
Sl.No.
102
1
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- Nylon 66
(Chips) 43% Glass
14000.000 K.G 2150960.00
Filled Polyamide Resin
Compound
Total 2,150,960.00
IMPORT ITEM
Qty
UOM
1
Polyamide 6-6 Resin
8364.300 K.G
2
Glass Fibre / Chopped
Strand
6321.000 K.G
FOB
(Currency)
46760.00
US$
46,760.00
CIF
CIF (Rs.)
(Currency)
30154.00
1387084.00
US$
9882.00
454572.00
US$
90
3
Additives such as Heat
Stabilizers / Aluminium
Distearate
14.700
4497.00
US$
K.G
206862.00
Total
2,048,518.00 44,533.00
Decision: Norms as per existing SION entry at Sl. No. H560 published through
Public Notice No. 88 (RE: 2007)/2004-2009 dated 05.12.2007, are approved.
Case No.:112/24/87ALC1/2007
Party Name:SHAKUN
POLYMERS LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00146/AM08/
RLA File
:34/24/040/00053/AM08/
Lic.No/Date:3410018943 Defer Date:
08.06.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
Sl.No.
103
1
2
3
EXPORT ITEM
Qty
UOM
63/0- HIGH FLAME
RESISTANCE ZERO HALOGEN 50000.000
CROSSLINKABLE COMPOUND
K.G
FOB (Rs.)
4935457.00
FOB
(Currency)
120377.00
US$
Total 4,935,457.00 120,377.00
UOM CIF (Rs.)
CIF (Currency)
IMPORT ITEM
Qty
ETHYLENE VINYL ACETATE (
13300.000 K.G
EVA )
MAGNESIUM HYDROXIDE
29650.000 K.G
SILANE
1500.000 K.G
Total
1036070.00 25270.00 US$
2917560.00 71160.00 US$
861000.00 21000.00 US$
4,814,630.00 117,430.00
Decision: With D/o C&PC OM No. 46011/100/2005-PC.II dated 22.11.2006, following adhoc
norms are approved:
EXPORT ITEM
QTY
High Flame Resistance Zero
Halogen
Crosslinkable 1 kg
Compound
104 Case No.:166/24/87-
IMPORT ITEM
1. Ethylene Vinyl Acetate (EVA )
2. Magnesium Hydroxide
3. Silane
Party Name:PIDILITE
Meet No/Date:40/87-
QTY
0.266 kg
0.593 kg
0.030 kg
Status:Approved
91
ALC1/2007
INDUSTRIES LIMITED
ALC1/2007
13.02.2008
HQ File
:01/87/050/00216/AM08/
RLA File
:03/95/040/01585/AM07/
Lic.No/Date:0310432064 Defer Date:
08.06.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
Sl.No.
1
2
3
4
EXPORT ITEM
Qty
62/0- Styrene Ethyl Acrylate & 2
Ethyl Hexyl Acrylate Copolymer
18800.000
Having Solids 40+/-1% Stabilised By
Emulsifier (Pidicryl Binder SN) MH
IMPORT ITEM
ACRYLAMIDE
ETHYL ACRYLATE
STYRENE
2-ETHYL HEXYL ACRYLATE
Qty
501.960
2101.840
2325.560
817.800
UOM FOB (Rs.)
FOB
(Currency)
K.G
18980.00
US$
854100.00
Total 854100.00 18980.00
UOM CIF (Rs.) CIF (Currency)
K.G
42662.00 938.67 US$
K.G
126098.00 2774.43 US$
K.G
116266.00 2558.12 US$
K.G
61329.00 1349.37 US$
Total 346,355.00 7,620.59
Decision: With D/o C&PC OM No. 46011/65/2005-PC.II dated 10.02.2006, following adhoc
norms are approved:
EXPORT ITEM
Styrene, Ethyl Acrylate & 2 Ethyl
Hexyl Acrylate Copolymer having
Solids 40 +/- 1% Stabilised by
Emulsifiers (Pidicryl Binder SN)
105
QTY
1 kg
1.
2.
3.
4.
IMPORT ITEM
Acrylamide
Ethyl Acrylate
Styrene
2 Ethyl Hexyl Acrylate
Case No.:115/24/87ALC1/2007
Party Name:K.K. NAG
LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00151/AM08/
RLA File
:07/21/040/00283/AM08/
Lic.No/Date:0710052048 Defer Date:
19.06.2007
QTY
0.0267 kg
0.1118 kg
0.1237 kg
0.0435 kg
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
Qty
63/0- POLYSTYRENE
2573.000
UOM FOB (Rs.)
K.G
332080.00
FOB
(Currency)
7547.00
92
FOAM PRODUCTS:8713921,3922
39231090
FIRM SHALL ACCOUNT
FOR 2573-KGS OF INPUT
IN THE
MANUFACTURE OF
RESULTANTPRODUCT
Sl.No.
1
IMPORT ITEM
EXPANDABLE
POLYSTYRENE BEADS
39031100
US$
Qty
Total 332,080.00 7,547.00
UOM CIF (Rs.) CIF (Currency)
2573.000 K.G
Total
192935.00 4245.00 US$
192,935.00 4,245.00
Decision: Taking cue from SION entry at Sl. No. H525, following adhoc norms are
approved:
EXPORT ITEM QTY IMPORT ITEM
Polyestyrene Foam 1 kg Expandable
Products
Polystyrene Beads
QTY
1.07 kg/kg content in export
product subject to
accountability
Case No.:118/24/87ALC1/2007
Party
Name:PLASTICHEMIX
INDUSTRIES
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00154/AM08/
RLA File
:34/24/040/00023/AM08/
Lic.No/Date:3410019021 Defer Date:
20.06.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
108
1
EXPORT ITEM
Qty
63/0- White
Masterbatches
containing 25 % 11000
Kgs Polymer, 25 %
44000.000
11000 kgs Calcium
Carbonate and 50 %
22000 Kgs Titanium
Dioxide
UOM
K.G
FOB (Rs.)
3260400.00
Total 3,260,400.00
FOB
(Currency)
57200.00
EURO
57,200.00
93
Sl.No.
1
2
3
IMPORT ITEM
Qty
UOM
LLDPE Granules
having specifc gravity 11330.000 K.G
of less than 0.94
Titanium Dioxide
22660.000 K.G
Calcium Carbonate
11330.000 K.G
Total
CIF (Rs.)
713790.00
CIF (Currency)
16995.00 US$
2093784.00 49852.00 US$
237930.00 5665.00 US$
3,045,504.00 72,512.00
Decision: With D/o C&PC OM No. 46011/31/2005-PC.II dated 19.07.2007,
following adhoc norms are approved:
EXPORT ITEM
QTY
White Master Batch (containing 1 kg
25% LLDPE, 50% Titanium
Dioxide and 25% Calcium
Carbonate)
IMPORT ITEM
1. LLDPE Granules
2. Titanium Dioxide
3. Calcium Carbonate
QTY
0.2575 kg
0.5150 kg
0.2575 kg
Case No.:3/20/87ALC1/2007
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00221/AM08/
RLA File
:03/95/040/01579/AM07/
Lic.No/Date:0310433290 Defer Date:
20.06.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
109
EXPORT ITEM
62/0- STYRENE
ACRYLATE
COPOLYMER IN
POWDER FORM
(KONDICRYL PRL 80)
Sl.No.
IMPORT ITEM
1
STYRENE
ISOBUTYL
2
METHYACRYLATE
UOM FOB (Rs.)
FOB
(Currency)
K.G
18260.00
US$
Qty
5200.000
821700.00
Total 821,700.00 18,260.00
Qty
UOM CIF (Rs.) CIF (Currency)
1773.200 K.G
88651.00 1950.52 US$
3073.200 K.G
Total
322654.00 7099.09 US$
411,305.00 9,049.61
Decision: With D/o C&PC OM No. 46011/65/2005-PC.II dated 20.04.2007,
following adhoc norms are approved:
94
EXPORT ITEM
QTY
Styrene
Acrylate 1 kg
Copolymer in Powder
form (Kondicryl PRL 80)
IMPORT ITEM
1. Styrene
2. Isobutyl Methacrylate
QTY
0.341 kg
0.591 kg
Case No.:121/24/87ALC1/2007
Party
Name:PLASTICHEMIX
INDUSTRIES
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00157/AM08/
RLA File
:34/24/040/00071/AM07/
Lic.No/Date:3410019044 Defer Date:
22.06.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
Qty
63/0- Colour
Masterbatches
(containing 60% PE Wax
and
40% Organic colour
5000.000
pigment)
containing 60 % 3000
Kgs and 40 % 2000 Kgs
Colour Pigment
111
Sl.No.
1
2
UOM
IMPORT ITEM
Relevant Polyethylene
Wax
Relevant Organic
Colour Pigment
in powder or wetcake
form
Qty
K.G
FOB (Rs.)
1540000.00
FOB
(Currency)
35000.00
US$
Total 1,540,000.00 35,000.00
UOM CIF (Rs.)
CIF (Currency)
3090.000 K.G
299112.00
6798.00 US$
2060.000 K.G
997040.00
22660.00 US$
Total
1,296,152.00 29,458.00
Decision: With D/o C&PC OM No. 46011/31/2005-PC.II dated 27.06.2007,
following adhoc norms are approved:
EXPORT ITEM
QTY
Colour Master Batch 1 kg
(containing
60%
Polyethylene Wax and
40% Colour Pigment)
IMPORT ITEM
1. Polyethylene Wax
2. Relevant Colour Pigment
(Powder/Wet Cake Form)
QTY
0.618 kg
0.412 kg
95
Case No.:15/19/87ALC1/2007
112 HQ File
:01/87/050/00195/AM08/
Party Name:WELSET
PLAST EXTRUSIONS
PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/95/040/00050/AM08/
Lic.No/Date:0310433846 Defer Date:
25.06.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:123/24/87ALC1/2007
Party Name:PADMANABH
ALLOYS & POLYMERS
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00161/AM08/
RLA File
:52/80/040/00004/AM08/
Lic.No/Date:5210021743 Defer Date:
25.06.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
Sl.No.
1
2
Qty
UOM
FOB (Rs.)
63/0- 60% MINERAL FILLED
PPHP COMPOUND GRADE P
17000.000 K.G 466600.00
1260 XT/C ( CONTAINING 40
+/- 1% PPHP)
Total 466,600.00
1
114
EXPORT ITEM
IMPORT ITEM
POLYPROPYLENE
HOMOPOLYMER (PPHP)
GRANULES
CALCIUM CARBONATE
Qty
UOM
FOB
(Currency)
11665.00
US$
11,665.00
CIF
CIF (Rs.)
(Currency)
10540.00
US$
6800.000 K.G
421600.00
7004.000 K.G
Total
21012.00 525.00 US$
442,612.00 11,065.00
Decision: With D/o C&PC OM No. 46011/162/2006-PC.II dated 15.12.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
60% Mineral Filled 1 kg 1. Polypropylene Homopolymer
PPHP
Compound
(PPHP) Granules
Grade: P 1260 XT/C
2. Calcium Carbonate
(containing 40 +/- 1%
PPHP)
QTY
0.400 kg
0.412 kg
96
Case No.:124/24/87ALC1/2007
Party Name:E I DUPONT Meet No/Date:40/87INDIA PVT LIMITED
ALC1/2007
13.02.2008
HQ File
:01/87/050/00162/AM08/
RLA File
:34/24/040/00044/AM08/
Status:Approved
Lic.No/Date:3410019057 Defer Date:
25.06.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
115
Sl.No.
1
2
3
EXPORT ITEM
63/0- 33% GLASS
FIBRE FILLED
NYLON-66
COMPOUND
GRANULES
IMPORT ITEM
POLYAMIDE- 66
RESIN
GLASS FIBRE
CHOPPED STRAND
HEAT STABILIZER
Qty
UOM
33000.000
Qty
K.G
FOB (Rs.)
4125000.00
FOB
(Currency)
89674.00
US$
Total 4,125,000.00 89,674.00
UOM CIF (Rs.)
CIF (Currency)
22515.900 K.G
2063731.00 44863.00 US$
11107.800 K.G
798422.00
33.000
1066418.00 23183.00 US$
3,928,571.00 85,403.00
K.G
Total
17357.00 US$
Decision: Norms as per existing SION entry at Sl. No. H561 published through
Public Notice No. 88 (RE: 2007)/2004-2009 dated 05.12.2007, are approved.
Case No.:125/24/87ALC1/2007
Party Name:E I DUPONT Meet No/Date:40/87INDIA PVT LIMITED
ALC1/2007
13.02.2008
HQ File
:01/87/050/00163/AM08/
RLA File
:34/24/040/00049/AM08/
Status:Approved
Lic.No/Date:3410019058 Defer Date:
25.06.2007
Application: Request is for adhoc norms for following:
116
Sl.No.
1
EXPORT ITEM
Qty
63/0- 30% Glass
Fibre Filled Nylon- 66 35000.000
Compound Granules
UOM
K.G
FOB (Rs.)
4375000.00
Total 4,375,000.00
FOB
(Currency)
95109.00
US$
95,109.00
97
Sl.No.
IMPORT ITEM
Qty
UOM
1
Polyamide 66 Resin 24846.500 K.G
Glass Fibre Chopped
2
10710.000 K.G
Strand
3
Heat Stabilizers
140.000 K.G
Total
CIF (Rs.)
CIF (Currency)
2293744.00 49864.00 US$
803022.00
17457.00 US$
1069868.00 23258.00 US$
4,166,634.00 90,579.00
Decision: Norms as per existing SION entry at Sl. No. H558 published through
Public Notice No. 88 (RE: 2007)/2004-2009 dated 05.12.2007, are approved.
Case No.:127/24/87ALC1/2007
Party Name:E I DUPONT Meet No/Date:40/87INDIA PVT LIMITED
ALC1/2007
13.02.2008
HQ File
:01/87/050/00164/AM08/
RLA File
:34/24/040/00051/AM08/
Status:Approved
Lic.No/Date:3410019059 Defer Date:
25.06.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
Qty
63/0- 50% Glass
Fibre Filled Nylon 66 50000.000
Compound Granules
117
UOM
K.G
FOB (Rs.)
6750000.00
FOB
(Currency)
146739.00
US$
Total 6,750,000.00 146,739.00
Qty
UOM CIF (Rs.)
CIF (Currency)
25275.000 K.G
4133744.00 89864.00 US$
Sl.No.
IMPORT ITEM
1
Polyamide 66 Resin
Glass Fibre Chopped
2
25500.000 K.G
Strand
3
Heat Stabilizers
210.000 K.G
Total
1217022.00 26457.00 US$
1077780.00 23430.00 US$
6,428,546.00 139,751.00
Decision: Norms as per existing SION entry at Sl. No. H559 published through
Public Notice No. 88 (RE: 2007)/2004-2009 dated 05.12.2007, are approved.
Case No.:128/24/87ALC1/2007
Party Name:SHAKUN
POLYMERS LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
118 HQ File
:01/87/050/00166/AM08/
RLA File
:34/24/040/00067/AM08/
Lic.No/Date:3410019064 Defer Date:
25.06.2007
Application: Request is for adhoc norms for following:
Status:Approved
98
Sl.No.
EXPORT ITEM
63/0- LINEAR LOW
DENSITY
CROSSLINKABLE
POLYETHYLENE
COMPOUND
1
Qty
UOM
120000.000
K.G
FOB (Rs.)
8431240.00
FOB
(Currency)
205640.00
US$
Total 8,431,240.00
Sl.No.
IMPORT ITEM
Qty
205,640.00
CIF
CIF (Rs.)
(Currency)
UOM
1
LINEAR LOW DENSITY
POLYETHYLENE (LLDPE)
Granules
105000.000 K.G
6457500.00
2
LLDPE MASTER BATCH
12000.000 K.G
1156200.00
3
SILANE
2400.000
K.G
Total
157500.00
US$
28200.00
US$
16800.00
688800.00
US$
8,302,500.00 202,500.00
Decision: With D/o C&PC OM No. 46011/100/2005-PC.II dated 22.11.2006,
following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Linear Low Density 1 kg 1. Linear Low Density
Crosslinkable
Polyethylene (LLDPE)
Polyethylene
Granules
Compound
2. LLDPE Masterbatch
3. Silane
119
QTY
0.875 kg
0.100 kg
0.020 kg
Case No.:130/24/87ALC1/2007
Party Name:ATUL LIMITED, Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00170/AM08/
RLA File
:08/24/040/00071/AM08/
Status:Approved
Lic.No/Date:0810065609 Defer Date:
26.06.2007
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
(Currency)
99
1
62/0- RESIN LAPOX
ADHESIVE
2200000.00
US$
Total 101,200,000.00 2,200,000.00
Qty
UOM
CIF (Rs.)
CIF (Currency)
460800.000 K.G
41863680.00 910080.00 US$
544000.000 K.G
45293440.00 984640.00 US$
Total
87,157,120.00 1,894,720.00
800000.000
Sl.No.
IMPORT ITEM
1
EPICHLOROHYDRIN
2
BISPHENOL-A
K.G
101200000.00
Decision: With D/o C&PC OM No. 46011/37/2005-PC.II dated 17.05.2005, following adhoc
norms are approved:
EXPORT ITEM
Resin Lapox Adhesive
QTY
1 kg
IMPORT ITEM
1. Epichlorohydrin
2. Bisphenol-A
Case No.:132/24/87ALC1/2007
Party Name:HALDIA
Meet No/Date:40/87PETROCHEMICALS LTD. ALC1/2007
13.02.2008
HQ File
:01/87/050/00172/AM08/
RLA File
:02/24/040/00101/AM08/
QTY
0.576 kg
0.680 kg
Status:Approved
Lic.No/Date:0210101896 Defer Date:
27.06.2007
Application: Request is for adhoc norms for following:
Sl.No.
121
1
Sl.No.
1
2
3
EXPORT ITEM
Qty
UOM
63/0- HDPE ( High
Density
Polyethylene)
granuels/ LLDPE
5600.000
(Linear Low Density
Polyethylene)
granuels
IMPORT ITEM
Naptha
M.T
FOB (Rs.)
311108000.00
FOB
(Currency)
311108000.00
Indian Rupees
Total 311,108,000.00
Qty
UOM
CIF (Rs.)
12704.300 M.T
Solvent
Exxsol Hexane RD/
84000.000 K.G
Exxsol Hexane Fluid
Catalyst (Lynx -1010HA,
2576.000 K.G
Z 212, Z 213, PZ Catalyst,
311,108,000.00
CIF (Currency)
6550719.00
268579479.00
US$
1722000.00
42000.00
Indian Rupees
28516320.00
695520.00 US$
100
4
5
RZ 200 Catalyst, DonorC, TEAL,HS Catalyst,)
Additives (ATMER 163,
DLTP, Crodamide ER,
Sylobloc 45H, Optibloc
10, LDPE, Kynerflex
35140.000 K.G
2821, Viton Free Flow,
Tinuvin 783 FDL,
Calcuim stearate, Lotrene,
Optobloc PP)
Anti-oxidants (DHT 4A,
Irganox 1010, Irganox
1076, Irgafos 168,
13440.000 K.G
Irganox 3114, PEPQ,
Ultranox 626, DLTDP,
DSTDP, Irganox 20)
Total
5042590.00
122990.00
Indian Rupees
3030720.00
73920.00
Indian Rupees
306,891,109.00 7,485,149.00
Decision: With D/o C&PC vide OM No. 46011/136/2002-PC.II dated 09/12.03.2007,
following adhoc norms are approved:
EXPORT ITEM
LLDPE/HDPE
Granules
QTY
1 MT
IMPORT ITEM
1. Naphtha
2. Solvent (Exxsol Hexane RD/ NHexane/ Cyclohexane)
3. Catalysts (Lynx-1010 HA/ Z 212/
Z 213/ PZ Catalyst/ RZ 200
Catalyst/ Donor-C/ TEAL/ HS
Catalyst/ Z-230 -1/ TIBAL/ THF
Catalyst)
4. Additives (ATMER 163/ DLTP/
PS-800/ Crodamide ER/ Sylobloc
45H/ Optibloc 10/ LDPE/ Lotrene/
Kynerflex 2821/ Viton GB Free
flow/ VGB-SARZ 100/200/
Tinuvin783 FDL/ Calcium
Stearate/ Octeal 9-10/ ZN
Stearate/ GMS-40/90/ Viton Sarz100/200)
5. Anti-oxidants (DHT 4A/
HYCITE/ Anox PP18/ Irganox
1010/ KINOX-10/ EU 10/ Irganox
1076/ kinox 76/ eu-76/ Irgafos
168/ EU-68/ K-68/ Irganox 3114/
PEPQ/ Ultranox 626/ DSTDP/
QTY
2268.64 kg
15 kg
0.46 kg
6.275 kg
2.40 kg
101
Irganox 20)
Case No.:2/20/87ALC1/2007
Party Name:MACRO
POLYMERS P. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
RLA File
Lic.No/Date:0810065625 Defer Date:
:01/87/050/00171/AM08/ :08/24/040/00085/AM08/ 27.06.2007
Application: Request is for adhoc norms for following:
Sl.No.
1.
Sl.No.
1.
2.
122
3.
4.
EXPORT ITEM
Alkyd Resin S-5030 (70% Resin
Content)
IMPORT ITEM
Soya Fatty Acid
Phthalic Anhydride
Glycerin
Toluene
Qty
57600.000 kg
Qty
13075.000 kg
19526.400 kg
12096.000 kg
19641.000 kg
Decision: With D/o C&PC OM No. 46011/246/2004-PC.II dated 21.11.2007,
following adhoc norms are approved:
EXPORT ITEM
Alkyd Resin S-5060
(70% Resin Content)
123
QTY
1 kg
1.
2.
3.
4.
IMPORT ITEM
Soya Fatty Acid
Phthalic Anhydride
Glycerine
Toluene
QTY
0.225 kg
0.337 kg
0.208 kg
0.315 kg
Case No.:9/18/87ALC1/2007
Party Name:HIGH
Meet No/Date:40/87TECHNOLOGY
ALC1/2007
PLASTICS (INDIA) PVT. 13.02.2008
LTD.
HQ File
:01/87/050/00188/AM08/
RLA File
:31/24/040/00101/AM08/
Status:Deferred
Lic.No/Date:3110029682 Defer
28.06.2007
Date:16.04.2008
Application: Request is for adhoc norms for following:
Sl.No. EXPORT ITEM
1
63/0- BOBBIN
SLEEVE ASSY
(VP5M5U -
Qty
850000.000
UOM
FOB (Rs.)
Number 8088600.00
FOB
(Currency)
200212.87
US$
102
11A209AA)
Sl.No.
1
IMPORT ITEM
Celanex 2002-2 Black
ED3002
Qty
Total
8,088,600.00
200,212.87
UOM CIF (Rs.)
CIF (Currency)
9014.250 K.G
Total
3373448.00 82480.38 US$
3,373,448.00 82,480.38
Decision: With D/o C&PC OM No. 46011/94/2003-PC.II dated 28.01.2008, case
was deferred for further discussion as under:
EXPORT ITEM
QTY
Bobbin Sleeve Assy 1 No.
(VP5M5U -11A209AA)
(Weight/piece 9.5gm +/0.5 gm)
IMPORT ITEM
Polybutylene
Terephthalate Resin
Celanex
QTY
0.01025 kg
Case No.:12/18/80ALC2/2007
Party Name:GARGI
ENTERPRISES,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/80/050/00235/AM08/
RLA File
:07/24/040/00207/AM08/
Lic.No/Date:0710052238 Defer Date:
29.06.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No. EXPORT ITEM
125
1
Sl.No.
1
Qty
61/0- PLASTIC
MOULDED
COMPONENTS(
TIPO 1 COVER :
25000 NO. ,
TIPO - 2 COVER : 81760.000
35000 NO. TIPO
1.5 COVER :
16560 NO. , TIPO
- 2 RIC COVER :
5200 NO.)
IMPORT ITEM
PC / ABS ALLOY
LUPOY GP 5008 B F
CODE E 0319 S
Qty
UOM
FOB (Rs.)
Number 1774658.00
FOB
(Currency)
40425.00
US$
Total
1,774,658.00
40,425.00
UOM CIF (Rs.) CIF (Currency)
10000.000 K.G
1613325.00 36750.00 US$
103
Total
1,613,325.00 36,750.00
Decision: With D/o C&PC OM No. 46011/94/2005-PC.II dated 06.11.2006,
following adhoc norms are approved:
EXPORT ITEM
QTY
Moulded
Plastic 1 kg
Articles
IMPORT ITEM
PC/ABS Alloy
QTY
Net Content in Export
Product + 5%
Wastage
Case No.:10/18/87ALC1/2007
Party Name:DSM
Meet No/Date:40/87ENGINEERING
ALC1/2007
PLASTICS (INDIA) PVT. 13.02.2008
LTD
HQ File
:01/87/050/00193/AM08/
RLA File
:31/24/040/00097/AM08/
Status:Approved
Lic.No/Date:3110029699 Defer Date:
29.06.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
126
Sl.No.
1
2
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- ARNITE TO 8
200 NATURAL
UNFILLED
POLYBUTYLENE
10000.000 K.G 1066560.00
TEREPTHALATE
(PBT) COMPOUND IN
NATURAL COLOUR
Total 1,066,560.00
IMPORT ITEM
BASE POLYMER (PBT
CHIPS / GRANULES)
LOXIOL (MOULD
RELEASING AGENT )
Qty
UOM
10291.300 K.G
30.900
FOB
(Currency)
26400.00
US$
26,400.00
CIF
CIF (Rs.)
(Currency)
19038.91
778691.21
US$
K.G
3601.86
88.07 US$
Total
782,293.07 19,126.98
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007,
following adhoc norms are approved:
EXPORT ITEM
Arnite TO6200/TO6202/TO 8200
QTY
IMPORT ITEM
1 kg 1. PBT
QTY
1.00000 kg
104
Unfilled Polybutene Terepthalate
Compound PBT Compound
Chips/Granules
2. Mould Releasing
Agent (Loxiol)
0.00300 kg
Case No.:154/24/87ALC1/2007
Party
Name:PLASTICHEMIX
INDUSTRIES
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00198/AM08/
RLA File
:34/24/040/00048/AM08/
Lic.No/Date:3410019090 Defer Date:
03.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
63/0- White
Masterbatches
containing 25 % 2500
Kgs LLDPE, 25 % 2500
Kgs Calcium Carbonate
and 50 % Titanium
Dioxide
Qty
UOM
10000.000 K.G
FOB
(Currency)
FOB (Rs.)
875000.00
875000.00
Indian
Rupees
Total 875,000.00
128
Sl.No.
IMPORT ITEM
Qty
UOM
875,000.00
CIF
CIF (Rs.)
(Currency)
1
Polyethylene LLDPE
having specific gravity of less
than 0.94
2575.000 K.G
164800.00 4120.00 US$
2
Titanium Dioxide
5150.000 K.G
515000.00
3
Calcium Carbonate
2575.000 K.G
Total
12875.00
US$
103000.00 2575.00 US$
782,800.00 19,570.00
Decision: With D/o C&PC OM No. 46011/31/2005-PC.II dated 19.07.2007,
following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
QTY
White Master Batch (containing 25% 1 kg 1. LLDPE Granules
0.2575 kg
LLDPE, 50% Titanium Dioxide and
2. Titanium Dioxide
0.5150 kg
25% Calcium Carbonate)
3. Calcium Carbonate 0.2575 kg
129 Case No.:11/18/87-
Party Name:DSM
Meet No/Date:40/87-
Status:Approved
105
ALC1/2007
ENGINEERING PLASTICS
(INDIA) PVT. LTD
ALC1/2007
13.02.2008
HQ File
:01/87/050/00197/AM08/
RLA File
:31/24/040/00105/AM08/
Lic.No/Date:3110029726 Defer Date:
03.07.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
2
3
4
UOM
63/0- AKULON N 24 G6 GREY
30% GLASS FIBER
10000.000 K.G
REINFORCED PA6 ( NYLON 6)
COMPOUND
Total
Sl.No.
1
Qty
IMPORT ITEM
NYLON 6 CHIPS / GRANULES
BASE POLYMER
GLASS FIBER
REINFORCING AGENT
BLACK MASTERBATCH PE 48/93
REL.COLOURANT
CALCIUM STEARATE
MOULD RELEASING AGENT
FOB (Rs.)
1191800.00
FOB
(Currency)
29500.00
US$
1,191,800.00 29,500.00
CIF
Qty UOM CIF (Rs.)
(Currency)
17913.75
7025.000 K.G 732672.38
US$
3090.000 K.G
132700.05
3244.50 US$
155.000 K.G
19208.69
469.65 US$
31.000
1394.69
34.10 US$
K.G
Total 885,975.81 21,662.00
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Akulon –K224 G6/N 24 G6
1 kg 1. Polyamide 6/Nylon 6
30% Glass Fiber Reinforced,
Chips/Granules
PA6 (Nylon 6) Compound
2. Glass Fiber
3. Relevant Colourant
(Pigments/Masterbatch)
4. Mould Release Agent
(Calcium Stearate)
QTY
0.70250 kg
0.30900 kg
0.01550 kg
0.00310 kg
Case No.:157/24/87ALC1/2007
Party Name:INJECTOPLAST
PVT.LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00203/AM08/
RLA File
:06/81/040/00004/AM08/
Lic.No/Date:0610012102 Defer Date:
05.07.2007
130
Status:Approved
106
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
Qty
UOM
63/0- BRUSH BOX,MADE OUT
OF PHENOLIC MOULDING
4000000.000 Number
COMOUND
Total
FOB
(Currency)
FOB (Rs.)
10320000.00
240000.00
US$
10,320,000.00 240,000.00
CIF
Sl.No.
IMPORT ITEM
Qty
UOM CIF (Rs.)
(Currency)
147312.00
1
PHENOLIC MOULDING COMPOUND 47520.000 K.G 6334416.00
US$
Total 6,334,416.00 147,312.00
Decision: With D/o C&PC OM No. 46011/93/2004-PC.II dated 28.02.2007, following adhoc
norms are approved:
EXPORT ITEM
QTY
Brush Box made of Phenolic Moulding 1 No.
Compound (Weight/Piece = 7.5 gms)
IMPORT ITEM
Phenolic Moulding
Compound
Case No.:161/24/87ALC1/2007
Party Name:PLASTICHEMIX Meet No/Date:40/87INDUSTRIES
ALC1/2007
13.02.2008
HQ File
:01/87/050/00211/AM08/
RLA File
:34/24/040/00004/AM08/
QTY
11.88 gms
Status:Approved
Lic.No/Date:3410019174 Defer Date:
11.07.2007
Application: Request is for adhoc norms for following:
Sl.No.
132
1
Sl.No.
1
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- White Masterbatcahes
Super White (N)
containing 50 % 5000
10000.000 K.G 890000.00
KgsTitanium Dioxide, 25 % 2500
Kgs Filler and 25 % 2500
Polymer
Total 890,000.00
IMPORT ITEM
Titanium Dioxide
FOB
(Currency)
20227.27
Indian Rupees
20,227.27
CIF
Qty
UOM CIF (Rs.)
(Currency)
5050.000 K.G
498520.00 11330.00 US$
107
2
3
Polyethylene LLDPE
2575.000 K.G
having specifc gravity of less than 0.94
Calcium Carbonate
2575.000 K.G
Total
181280.00 4120.00 US$
113300.00 2575.00 US$
793,100.00 18,025.00
Decision: With D/o C&PC OM No. 46011/31/2005-PC.II dated 19.07.2007, following adhoc
norms are approved:
EXPORT ITEM
QTY
White
Master
Batch 1 kg
(containing 25% LLDPE,
50% Titanium Dioxide and
25% Calcium Carbonate)
IMPORT ITEM
1. LLDPE Granules
2. Titanium Dioxide
3. Calcium Carbonate
QTY
0.2575 kg
0.5150 kg
0.2575 kg
Case No.:14/18/87ALC1/2007
Party Name:INJECTOPLAST
PVT.LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00212/AM08/
RLA File
:06/81/040/00006/AM08/
Lic.No/Date:0610012123 Defer Date:
11.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
1.
Insulator Asembly altemator Terminal made out of
Phenolic Moulding compound
2.
Insulator Alternator Rectifier made out of Phenolic
Moulding compound
3.
Insulator Asembly altemator Terminal made out of
Polyamide 66
134
4.
Housing Asembly alternator Regulator (Carrier) made
out of Polyphenulene sulphide with metal insert and M3
Stud
5.
Insulator Asembly alternator Terminal made out of
Polyamide 66 with metal insurt M6 stud
6.
Insulator alternator Terminal made out of
Polyphenylene sulphide
7.
Insulator alternator Terminal made out of Polyamide
66
8.
Insulator Asembly altemator Terminal made out of
Poluyamide 66 with metal insurt M8 stud
9.
B+Insulator Part no Plastic part made out of Polamide
66 with metal inserts M-6
10.
Lever-Str MTR Drive Plastic Part made out of
Qty
150000 Nos.
120000 Nos.
100000 Nos.
75000 Nos.
80000 Nos.
200000 Nos.
225000 Nos.
120000 Nos.
25000 Nos.
300000 Nos.
108
Polamide 66
11.
Insulator alternator Terminal ENG CVR LWR Plastic
Part made out of Polyamide 66 with insurt M8
12.
Seal Asy-Str Mtr Hsg Opening Plastic Part made out of
Thermoplastic Elastomer
13.
Seal Asy-Str Mtr Asy Plastic Part made out of
Thermoplastic Elastomer
14.
Tube Str Mtr HSG DRN Plastic part made out of
Thermoplastic Elastomer
Sl.No.
IMPORT ITEM
1.
Phenolic Moulding Compound
2.
Polyamide 66
3.
Polyphenuylene Sulphide
4.
M3 STUD
5.
Themoplastic Elastomer (TPE)
10000 Nos.
10000 Nos.
10000 Nos.
800000 Nos.
Qty
5184.27 kg
8393.96 kg
2833.43 kg
75000 Nos.
1353.19 kg
Decision: With D/o C&PC OM No. 46011/169/2004-PC.II dated 21.11.2007, following
adhoc norms are approved:
EXPORT ITEM
Insulator Asembly altemator
Terminal made out of Phenolic
Moulding compound
Insulator Alternator Rectifier made
out of Phenolic Moulding
compound
Insulator Asembly altemator
Terminal made out of Polyamide 66
Housing Asembly alternator
Regulator (Carrier) made out of
Polyphenulene sulphide with metal
insert and M3 Stud
QTY
1 No.
IMPORT ITEM
Relevant Phenolic
Moulding Compound
QTY
Net Content +
5% Wastage
1 No.
Relevant Phenolic
Moulding Compound
Net Content +
5% Wastage
1 No.
Polyamide 66
1 No.
1. Polyphenylene
Sulphide
Net Content +
5% Wastage
Net Content +
5% Wastage
Insulator Asembly alternator
Terminal made out of Polyamide
66 with metal insurt M6 stud
Insulator alternator Terminal made
out of Polyphenylene sulphide
Insulator alternator Terminal made
out of Polyamide 66
Insulator Asembly altemator
Terminal made out of Poluyamide
66 with metal insurt M8 stud
B+Insulator Part no Plastic part
1 No.
Polyamide 66
Net Content +
5% Wastage
1 No.
1 No.
Polyphenylene
Sulphide
Polyamide 66
1 No.
Polyamide 66
Net Content +
5% Wastage
Net Content +
5% Wastage
Net Content +
5% Wastage
1 No.
Polyamide 66
2. Relevant M3 Stud
Net to Net
Net Content +
109
made out of Polamide 66 with
metal inserts M-6
Lever-Str MTR Drive Plastic Part
made out of Polamide 66
Insulator alternator Terminal ENG
CVR LWR Plastic Part made out of
Polyamide 66 with insurt M8
Seal Asy-Str Mtr Hsg Opening
Plastic Part made out of
Thermoplastic Elastomer
Seal Asy-Str Mtr Asy Plastic Part
made out of Thermoplastic
Elastomer
Tube Str Mtr HSG DRN Plastic
part made out of Thermoplastic
Elastomer
5% Wastage
1 No.
Polyamide 66
Net Content +
5% Wastage
Net Content +
5% Wastage
1 No.
Polyamide 66
1 No.
Thermo Plastic
Elastomer
Net Content +
5% Wastage
1 No.
Thermo Plastic
Elastomer
Net Content +
5% Wastage
1 No.
Thermo Plastic
Elastomer
Net Content +
5% Wastage
Case No.:164/24/87ALC1/2007
Party Name:GARGI
HUTTENES ALBERTUS
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00214/AM08/
RLA File
:03/94/040/00349/AM08/
Lic.No/Date:0310435934 Defer Date:
12.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
135
EXPORT ITEM
Qty
UOM
62/0- KALTHARZ 70P
(Phenolic Furan No Bake
500000.000
Binder)
COMMERCIAL
K.G
FOB (Rs.)
30750000.00
FOB
(Currency)
750000.00
US$
Total 30,750,000.00
Sl.No.
1
2
3
IMPORT ITEM
FURFURAL ALCOHOL
COMMERCIAL
PARA FORMAL DEHYDE 91
+/- 2%
COMMERCIAL
PHENOL 100%
COMMERCIAL
Qty
UOM
350000.000 K.G
750,000.00
CIF
CIF (Rs.)
(Currency)
490000.00
20090000.00
US$
57900.000 K.G
1661730.00
97050.000 K.G
6764385.00
Total
40530.00 US$
164985.00
US$
28,516,115.00 695,515.00
110
Decision: With D/o C&PC OM No. 46011/197/2005-PC.II dated 13.04.2006, following adhoc
norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Kaltharz 70 P (Phenolic 1 kg 1. Furfural Alcohol
Furan No Bake Binder)
2. Para Formaldehyde
3. Phenol
QTY
0.7000 kg
0.1158 kg
0.1941 kg
Case No.:20/19/87ALC1/2007
Party Name:DINMAN
POLYPACKS PVT.LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00223/AM08/
RLA File
:02/24/040/00108/AM08/
Lic.No/Date:0210102401 Defer Date:
16.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
Qty
UOM
63/0- Printed PP
Woven Sacks (BOPP 259050.000
Film laminated)
1
Sl.No.
138
EXPORT ITEM
IMPORT ITEM
FOB (Rs.)
K.G
23292482.00
Total
23,292,482.00
Qty
UOM
CIF (Rs.)
1
PP GRANULES
219415.350 K.G
12885156.00
2
BOPP FILM
40800.375
K.G
3883140.00
3
Plastic Material (PP
Granules) used for
lamination purpose
13600.125
K.G
798660.00
4
PRINTING INK
8548.650
K.G
1038704.00
Total
FOB
(Currency)
575123.00
US$
575,123.00
CIF
(Currency)
318152.00
US$
95880.00
US$
19720.00
US$
25647.00
US$
18,605,660.00 459,399.00
Decision: With D/o C&PC OM No. 46011/22/2006-PC.II dated 17.10.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Printed BOPP Film Laminated PP 1 kg
1. PP Granules for Woven
QTY
0.8470 kg
111
Woven Sacks (containing 15%
BOPP Film )
Sacks
2. BOPP Film
3. PP Granules for
Lamination
4. Printing Ink (Solid
Content 16-37%)
0.1575 kg
0.0525 kg
0.0330 kg
Case No.:177/24/87ALC1/2007
Party Name:MACRO
POLYMERS P. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00227/AM08/
RLA File
:08/24/040/00098/AM08/
Lic.No/Date:0810066028 Defer Date:
17.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
139
Sl.No.
1.
Sl.No.
1.
2.
3.
4.
EXPORT ITEM
Alkyd Resin S-5060 (70% Resin Content)
IMPORT ITEM
Soya Fatty Acid
Phthalic Anhydride CAS NO. 85-44-9
Pentaerithritol CAS NO. 115-77-5
Long Oil Alkyd Resin Solution 10% Solid Content
Qty
76000.000 kg
Qty
29412.000 kg
12844.000 kg
11324.000 kg
27208.000 kg
Decision: With D/o C&PC OM No. 46011/246/2004-PC.II dated 11.01.2008,
following adhoc norms are approved:
EXPORT ITEM
Alkyd Resin S-5060
(70% Resin Content)
142
QTY
1 kg 1.
2.
3.
4.
IMPORT ITEM
Soya Fatty Acid
Phthalic Anhydride
Pentaerithirtol
Long Oil Alkyd Resin Solution
(10% Solid Content)
QTY
0.387 kg
0.169 kg
0.149 kg
0.358 kg
Case No.:181/24/87ALC1/2007
Party
Name:PLASTICHEMIX
INDUSTRIES
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00231/AM08/
RLA File
:34/24/040/00071/AM08/
Lic.No/Date:3410019224 Defer Date:
18.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
(Currency)
112
1
63/0- LLDPE
Masterbatches
containing 97 % 11640 12000.000
kgs Polymer and 3 %
Processing Aid
Sl.No.
IMPORT ITEM
1
LLDPE granules
2
Dynamer FX 5920A
K.G
1401600.00
35040.00
EURO
Total 1,401,600.00 35,040.00
Qty
UOM CIF (Rs.)
CIF (Currency)
11989.200 K.G
719352.00 17983.80 US$
370.800 K.G
563616.00 14090.40 US$
Total 1,282,968.00 32,074.20
Decision: With D/o C&PC OM No. 46011/31/2005-PC.II dated 28.02.2007,
following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
QTY
Additive Master Batch 1 kg 1. LLDPE Granules
0.9991 kg
(containing 97% LLDPE,
2. Additive Dynamer FX 5920A 0.0309 kg
3% Additive Dynamer FX
5920A)
Case No.:190/24/87ALC1/2007
Party Name:KANPUR
PLASTIPACK LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00254/AM08/
RLA File
:06/24/040/00010/AM08/
Lic.No/Date:0610012140 Defer Date:
23.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
145
1
EXPORT ITEM
Qty
UOM
63/0- FLEXIBLE
INTERMEDIATE BULK
CONTAINERS
U.V.Stabilized
500000.000
containing437.50 M.T.
PP Fabric and 62.5 M.T.
Lamination/Coating.
VIRGIN
K.G
FOB (Rs.)
41998370.00
Total 41,998,370.00
Sl.No.
1
IMPORT ITEM
PP GRANULES ( for
P.P.Fabrics )
Qty
UOM
471625.000 K.G
FOB
(Currency)
1035718.00
US$
1,035,718.00
CIF
CIF (Rs.)
(Currency)
721875.00
29632968.00
US$
113
2
3
VIRGIN
PP GRANULES FOR
LAMINATION/COATING
65625.000 K.G
VIRGIN
RELEVANT U.V. STABILISER
9625.000 K.G
VIRGIN
Total
3771470.00
91875.00
US$
53286.00
US$
35,591,838.00 867,036.00
2187400.00
Decision: With D/o C&PC OM No. 46011/129/2006-PC.II dated 19.03.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Flexible Intermediate Bulk 1 kg 1. Polypropylene
Container - U.V. Stabilized
Resins/Granules (for PP
containing 437.50 MT PP
Fabric)
Fabric and 62.5 MT
2. Polypropylene
lamination/coating
Resin/Granules (for
lamination/coating)
3. UV Stabilizer
QTY
0.94325 kg
0.13125 kg
0.01925 kg
Case No.:192/24/87ALC1/2007
Party Name:J.D.EXPORTS
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00255/AM08/
RLA File
:03/94/040/00377/AM08/
Lic.No/Date:0310437234 Defer Date:
24.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
146
1
Sl.No.
1
EXPORT ITEM
63/0- Articles made of
Polyethylene
Terephthalate Glycol
Copolyester (PETG);
Pears Handwash Bottle;
Avg. Wt. 46 Gms.
Tech. Spec. : Handwash
Bottle 237 Ml.
IMPORT ITEM
Polyethylene Terephthalate
Glycol Copolyester (PETG)
Qty
UOM
46000.000 K.G
FOB (Rs.)
8700000.00
FOB
(Currency)
8700000.00
Indian Rupees
Total 8,700,000.00
8,700,000.00
Qty
UOM
CIF (Rs.) CIF (Currency)
48300.000 K.G
5504751.00 131065.00 US$
114
Tech. Spec. : Granules; Eastar
Copolyester GN071 Natural
Total
5,504,751.00 131,065.00
Decision: Taking cue from SION, following adhoc norms are approved:
EXPORT ITEM
Articles made of
Polyethylene Terephthalate
Glycol
Copolyester (PETG)
QTY
IMPORT ITEM
1 kg
Polyethylene
Terephthalate Glycol
Copolyester (PETG)
QTY
1.05 kg/kg content in
export product
Case No.:196/24/87ALC1/2007
Party Name:HALDIA
PETROCHEMICALS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00258/AM08/
RLA File
:02/24/040/00130/AM08/
Lic.No/Date:0210102588 Defer Date:
25.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No. EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB (Currency)
1
63/0- Motor Spirit 25000.000
M.T
594500000.00
14500000.00 US$
Total 594,500,000.00
14,500,000.00
Sl.No. IMPORT ITEM
Qty
UOM
CIF (Rs.)
CIF (Currency)
147 1
Naphtha
18350.000 M.T
549215500.00 13395500.00 US$
Total
549,215,500.00 13,395,500.00
Decision: With D/o C&PC OM No. 46011/24/2003-PC.II dated 07.03.2007, following
adhoc norms are approved:
EXPORT ITEM
Motor Sprit
Case No.:7/20/87ALC1/2007
148 HQ File
:01/87/050/00259/AM08/
QTY
1 MT
IMPORT ITEM
Naphtha
QTY
0.734
MT
Party Name: GILLETTE
INDIA LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00143/AM08/
Lic.No/Date:0410090356 Defer Date:
27.07.2007
Application: Request is for adhoc norms for following:
Status:Approved
115
Sl.No.
1
EXPORT
ITEM
63/0TOOTH
BRUSH PLASTICS
Qty
UOM
1
2
3
2500000.00
US$
5000000.000 Number 103625000.00
Total
Sl.No.
FOB
(Currency)
FOB (Rs.)
IMPORT ITEM
103,625,000.00
Qty
TOOTH BRUSH BULK TOOTH
BRUSH
PVC FILM - RIGID
PACKING
MATERIAL
PAPER - BOARD
PACKING
MATERIAL
UOM
CIF (Rs.)
2,500,000.00
CIF
(Currency)
5000000.000 Number
83900000.00
2000000.00
US$
34845.000
K.G
2923495.50
69690.00
US$
20330.600
K.G
1791024.21
42694.26
US$
Total
88,614,519.71 2,112,384.26
Decision: With D/o C&PC OM No. 46011/113/2007-PC.II dated 30.11.2007,
following adhoc norms are approved:
EXPORT ITEM
QTY
Tooth Brush Packed 1
in Consumer Packs Million
(with
ORAL-B Pcs.
Logo)
IMPORT ITEM
1. Relevant Bulk Tooth
Brushes without
consumer packing
(ORAL-B Logo)
2. Relevant Rigid PVC
Film
3. Relevant Paper Board
QTY
1 Million Pcs.
As per Packing
Policy
As per Packing
Policy
Case No.:197/24/87ALC1/2007
Party Name: EXPANDED
INCORPORATION
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
149 :01/87/050/00260/AM08/
RLA File
:03/94/040/00417/AM08/
Lic.No/Date:0310437687 Defer Date:
30.07.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB (Currency)
116
1
62/0- Blended Polyol
ECOPUF B 1418 R
Sl.No.
1
2
3
4
5
6
7
8
9
3800.000
8626.00 US$
Total 347,196.50
8,626.00
37.620
62.320
1925.080
K.G
K.G
K.G
CIF
(Currency)
2310.00
57.00 US$
3085.00
76.00 US$
123205.00 3042.00 US$
1054.120
K.G
63247.00
1562.00 US$
7.980
K.G
1955.00
48.00 US$
15.960
32.300
13.300
13.300
K.G
K.G
K.G
K.G
Total
1580.00
6815.00
5586.00
4921.00
212,704.00
39.00 US$
168.00 US$
138.00 US$
122.00 US$
5,252.00
IMPORT ITEM
Phthalic Anhydride
Diethylene Glycol
Propylene Oxide
1, 1 Dichloro Fluro Ethane (HCFC
141b)
Pentamethyldiethylenetriamine
(PMDTA)
Dimethylcyclohexylamine (DMCHA)
Silicon Surfactant
Catalyst 1 (Dabco TMR 2)
Catalyst 2 (Toyocat F-40)
K.G 347196.50
Qty
UOM
CIF (Rs.)
Decision: With D/o C&PC OM No. 46011/77/2007-PC.II dated 13.11.2007, following adhoc
norms are approved:
EXPORT ITEM QTY
IMPORT ITEM
Blended
Polyol 1 kg 1. Phthalic Anhydride
(Ecopuf
2. Diethylene Glycol
B 1418 R)
3. Propylene Oxide
4. 1, 1 Di-Chloro Fluro Ethane (HCFC 141 b)
5.Pentamethyldiethylenetriamine
6. Dimethylcyclohexyalmine
7. Silicon Sufactant
8. Catalyst (Dabco TMR 2)
9. Catalyst (Toyocat F-40)
Case No.:200/24/87ALC1/2007
150 HQ File
:01/87/050/00264/AM08/
QTY
0.0099 kg
0.0164 kg
0.5066 kg
0.2774 kg
0.0021 kg
0.0042 kg
0.0085 kg
0.0035 kg
0.0035 kg
Party Name:HALDIA
PETROCHEMICALS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:02/24/040/00136/AM08/
Lic.No/Date:0210102732 Defer Date:
31.07.2007
Application: Request is for adhoc norms for following:
Status:Approved
117
Sl.No. EXPORT ITEM
Qty
UOM
63/01
1000.000 M.T
Polypropylene
Total
Sl.No.
1
2
3
4
IMPORT ITEM
Naphtha
FOB (Rs.)
FOB (Currency)
55350000.00 Indian
55350000.00
Rupees
55,350,000.00
55,350,000.00
CIF
Qty
UOM
CIF (Rs.)
(Currency)
954750.00
1273.000 M.T
39144750.00
US$
Catalyst ( ZN 118, ZNM1 Z 230,
ZN GF2A-1, Lynx-1010HA, Z
416.000 K.G
213, Donor-C, Donor-D, TEAL,
HS Catalyst)
Additives (ATMER 63,
Crodamide ER, PEPQ, Syloblock
45 H, Sodium BENZOATE,
2500.000 K.G
Nalco-39M, Calcuim Stearate,
Glycol Mono Stearate, GMS 40,
Hyperform HPN)
Anti-oxidants (DHT 4A,Irganox
1010,Irganox 1076, Irganox 20,
1717.000 K.G
Irgafos 168, DSTDP, Irganox
1330)
Total
4605120.00
112320.00
US$
358750.00
8750.00 US$
387184.00
9444.00 US$
44,495,804.00 1,085,264.00
Decision: With D/o C&PC OM No. 46011/260/2004-PC.II dated 9/12.3.2007, following adhoc
norms are approved:
EXPORT ITEM
Polypropylene
(Homopolymer)/Granules
QTY
1 MT
1.
2.
3.
4.
IMPORT ITEM
Naphtha
Catalyst (ZN GF2A-1H/ Lynx
1010 HA/ Donor-C/ Donor-D/
TEAL/ ZN 111-4/ ZNM1/ZN 118
Anti-oxidants (DHT 4A/
Irganox 1010/ Irganox 1076/
Irgafos 168/ DSTDP/ Irganox
1330)
Additives (ATMER 63/
Crodamide ER/ PEPQ/ Syloblock
45 H/ Calcium Stearate/ Glycol
Mono Stearate/ Nalco-39M/
Sodium BENZOATE/ GMS 40/
Hyperform HPN)
QTY
1.273 MT
0.416 kgs
1.717 kgs
2.500 kgs
118
Case No.:16/23/87ALC1/2007
Party Name:POLYPLEX
CORPORATION LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
152 HQ File
:01/87/050/00269/AM08/
RLA File
:05/24/040/00359/AM08/
Lic.No/Date:0510207163 Defer Date:
03.08.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:18/23/87ALC1/2007
153 HQ File
:01/87/050/00275/AM08/
Party Name:HENKEL
Meet No/Date:40/87CAC PRIVATE LIMITED ALC1/2007
13.02.2008
RLA File
:03/94/040/00342/AM08/
Status:Approved
Lic.No/Date:0310438233 Defer Date:
03.08.2007
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:204/24/87ALC1/2007
Party Name:BAYER
MATERIALSCIENCE
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00267/AM08/
RLA File
:04/24/040/00120/AM08/
Lic.No/Date:0410090431 Defer Date:
06.08.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
154
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- Thermoplastic
Polyurethyane
50000.000 K.G 8500000.00
Desmopan 345
Total 8,500,000.00
IMPORT ITEM
Qty
UOM
210396.00
US$
210,396.00
CIF
CIF (Rs.)
(Currency)
11760.00
480984.00
US$
1
DESMOPHEN 2002 Eingeg 4200.000 K.G
2
DESMODUR TRIAL
PRODUCT PU O118 F
FUSED
15000.000 K.G
1233135.00
3
1,4 BUTANE DIOL
21700.000 K.G
2130072.00
4
STABOXAL I
150.000
5
6
NACOL 8-99
ADIPIC ACID
150.000 K.G
25850.000 K.G
K.G
FOB
(Currency)
30150.00
US$
52080.00
US$
6535.45
267300.00
US$
28875.00
705.99 US$
2325983.00 56870.00
119
US$
6,466,349.00 158,101.44
Total
Decision: With D/o C&PC OM No. 46011/23/2006-PC.II dated 22.06.2007,
following adhoc norms are approved:
EXPORT ITEM
Thermoplastic
PolyurethyaneDESMOPAN 345
QTY
1 kg 1.
2.
3.
4.
5.
6.
IMPORT ITEM
Desmophen 2002 H
1, 4 Butane Diol
Desmodur TPPU Fused 0118
Nacol 8-99
Stabaxol
Adipic Acid
QTY
0.080 kg
0.344 kg
0.300 kg
0.003 kg
0.002 kg
0.332 kg
Case No.:214/24/87ALC1/2007
Party Name:EXPANDED
INCORPORATION
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00276/AM08/
RLA File
:03/94/040/00396/AM08/
Lic.No/Date:0310438248
06.08.2007
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No.
1
156
Sl.No.
1
2
3
4
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
(Currency)
62/0- POLYESTER
POLYOL
EXPOL PH 240
18000.000
IMPORT ITEM
Phthalic Anhydride
Diethylene Glycol
Adipic Acid
Catalyst (Fascat 4100)
Total 1,448,662.50 35,550.00
Qty
UOM CIF (Rs.)
CIF (Currency)
6818.400 K.G
418650.00 10211.00 US$
11046.600 K.G
546807.00 13337.00 US$
2313.000 K.G
196605.00 4795.00 US$
4.680
K.G
17784.00
434.00 US$
Total 1,179,846.00 28,777.00
K.G
1448662.50
35550.00 US$
Decision: With D/o C&PC OM No. 46011/77/2007-PC.II dated 13.11.2007, following adhoc
norms are approved:
EXPORT ITEM
QTY
Polyester
Polyol 1 kg
(EXPOL PH 240)
IMPORT ITEM
1. Phthalic Anhydride
2. Diethylene Glycol
QTY
0.3788 kg
0.6137 kg
120
3. Adipic Acid
4. Catalyst – (Fascat 4100)
0.1285 kg
0.00026 kg
Case No.:208/24/87ALC1/2007
Party Name:BLUEBELL
POLYMERS PRIVATE LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00270/AM08/
RLA File
:08/24/040/00121/AM08/
Lic.No/Date:0810066434
07.08.2007
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty UOM
62/0- MEDIUM MOLECULAR
WEIGHT EPOXY RESIN 75%
SOLUTION IN XYLENE (BLUMER
1450 XX)
1
12.000 M.T
FOB (Rs.)
1512000.00
FOB
(Currency)
36000.00
US$
Total 1,512,000.00
158
Sl.No.
1
IMPORT ITEM
Qty
EPOXY RESIN / EPOXIDE RESIN
UOM
7.080 M.T
Total
36,000.00
CIF
CIF (Rs.)
(Currency)
21948.00
921816.00
US$
921,816.00 21,948.00
Decision: With D/o C&PC OM No. 46011/32/2007-PC.II dated 17.04.2007, following adhoc
norms are approved:
EXPORT ITEM
QTY
Medium Molecular Weight Epoxy 1 kg
Resin 75% Solution in Xylene
(Blumer 1450 XX)
IMPORT ITEM
Epoxy Resin/Epoxide
Resin
QTY
0.59 kg
Case No.:210/24/87ALC1/2007
Party Name:KAMSONS
CHEMICALS PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
159 :01/87/050/00272/AM08/
RLA File
:03/94/040/00440/AM08/
Lic.No/Date:0310438576 Defer Date:
07.08.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
121
(Currency)
62/0- AQUEOUS
POLYURETHANE DISPERSION
(KAMTHANE
17520.000 K.G 2388660.00
K-1492)
HAVING SOLID CONTENT OF
37+/- 1%.
Total 2,388,660.00
1
Sl.No.
IMPORT ITEM
Qty
UOM
Desmodur-W (Bayer)/VESTANTAT H12
3915.720 K.G
MDI(DEGUSSA)
Total
1
58260.00
US$
58,260.00
CIF
CIF (Rs.)
(Currency)
32109.00
1316469.00
US$
1,316,469.00 32,109.00
Decision: With D/o C&PC OM No. 46011/3/2006-PC.II dated 20.06.2006, following adhoc
norms are approved:
EXPORT ITEM
QTY
Aqueous Polyurethane 1 kg
Dispersion (Kamthane
K-1492 Solid Content
37 +/- 1%)
1.
2.
3.
4.
5.
6.
IMPORT ITEM
Desmodur-W Vestantat H12 (MDI)
N-methyl-2-Pyrrolidone (NMP)
Dimethylol Proponic Acid
1:6 Hexane Diol
Adipic Acid
Hydrazine Hydrate
QTY
0.2235 kg
0.2010 kg
0.0260 kg
0.0552 kg
0.0598 kg
0.0050 kg
Case No.:216/24/87ALC1/2007
Party Name:EXPANDED
INCORPORATION
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00280/AM08/
RLA File
:03/94/040/00460/AM08/
Lic.No/Date:0310438814 Defer Date:
08.08.2007
Status:Approved
Application: Request is for adhoc norms for following:
160
Sl.No.
1
EXPORT ITEM
62/0- Blended Polyol
Ecopuf B 1417 R
Qty
5000.000
UOM
FOB (Rs.)
K.G 486000.00
Total 486,000.00
Sl.No.
1
2
IMPORT ITEM
Phthalic Anhydride
Diethylene Glycol
Qty
152.000
253.500
UOM
K.G
K.G
FOB (Currency)
12000.00 US$
12,000.00
CIF
CIF (Rs.)
(Currency)
9333.00
229.00 US$
12548.00 308.00 US$
122
3
Propylene Oxide
1, 1 Di-Chloro Fluro Ethane (HCFC
141b)
Pentamethyldiethylenetriamine
(PMDTA)
Dimethylcyclohexyalmine (DMCHA)
Silicon Surfactant
Catalyst 1 (Dabco TMR 2)
Catalyst 2 (Toyocat F-40)
4
5
6
7
8
9
1795.000
K.G
116675.00 2863.00 US$
1272.500
K.G
76350.00
1874.00 US$
10.500
K.G
2573.00
63.00 US$
21.500
43.500
18.000
18.000
K.G
K.G
K.G
K.G
Total
2150.00
9353.00
7560.00
7560.00
244,102.00
53.00 US$
230.00 US$
186.00 US$
186.00 US$
5,992.00
Decision: With D/o C&PC OM No. 46011/77/2007-PC.II dated 13.11.2007, following adhoc
norms are approved:
EXPORT ITEM QTY
IMPORT ITEM
Blended Polyol 1 kg 1. Phthalic Anhydride
(Ecopuf
2. Diethylene Glycol
B 1417 R)
3. Propylene Oxide
4. 1, 1 Di-Chloro Fluro Ethane (HCFC 141 b)
5.Pentamethyldiethylenetriamine
6. Dimethylcyclohexyalmine
7. Silicon Sufactant
8. Catalyst (Dabco TMR 2)
9. Catalyst (Toyocat F-40)
Case No.:213/24/87ALC1/2007
Party Name:ALOK
Meet No/Date:40/87MASTERBATCHES LTD., ALC1/2007
13.02.2008
HQ File
:01/87/050/00274/AM08/
RLA File
:05/24/040/00384/AM08/
QTY
0.0304 kg
0.0507 kg
0.3590 kg
0.2545 kg
0.0021 kg
0.0043 kg
0.0087 kg
0.0036 kg
0.0036 kg
Status:Approved
Lic.No/Date:0510207430 Defer Date:
09.08.2007
Application: Request is for adhoc norms for following:
162
Sl.No.
1
EXPORT ITEM
63/0- FILLER
MASTERBATCH;
CONTAINING
a ) Polymer of Polyethylene
viz. LLDPE
contents 25%= 4500 Kgs.
Qty
UOM
18000.000 K.G
FOB (Rs.)
483356.00
FOB
(Currency)
11920.00
US$
123
b ) Relevant Fillers viz.
Calcium Carbonate
contents 75%=13500 Kgs.
Total 483,356.00
Sl.No.
1
2
IMPORT ITEM
POLYMER OF POLYETHYLENE
VIZ. LLDPE
RELEVANT FILLERS VIZ.
CALCIUM CARBONATE
Qty
11,920.00
CIF
CIF (Rs.)
(Currency)
UOM
4635.000 K.G
306357.00 7555.05 US$
13905.000 K.G
95854.00
Total
2363.85 US$
402,211.00 9,918.90
Decision: With D/o C&PC OM No. 46011/36/2006-PC.II dated 20.04.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
Filler/Calcium Carbonate Master 1 kg
Batch (containing 25% LLDPE &
75% Filler/Calcium Carbonate)
Case No.:17/23/87ALC1/2007
163 HQ File
:01/87/050/00287/AM08/
IMPORT ITEM
1. LLDPE Granules
2. Filler/Calcium
Carbonate
QTY
0.2575 kg
0.7725 kg
Party Name:BILCARE
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:31/24/040/00139/AM08/
Lic.No/Date:3110030292 Defer Date:
10.08.2007
Status:Approved
Decision: Case is approved in the NC Meeting No. 38/08 dated 30.01.2008.
Case No.:219/24/87ALC1/2007
Party Name:DSM
ENGINEERING PLASTICS
(INDIA) PVT. LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00282/AM08/
RLA File
:31/24/040/00395/AM07/
Lic.No/Date:3110030274 Defer Date:
10.08.2007
Status:Approved
Application: Request is for adhoc norms for following:
164
Sl.No.
1
EXPORT ITEM
Qty
63/0- AKULON K225 KS
NATURAL
5000.000
UNFILLED FLAME RETARDANT
PA6 (NYLON 6) COMPOUND
UOM FOB (Rs.)
K.G
800000.00
FOB
(Currency)
18161.18
US$
124
Sl.No.
IMPORT ITEM
1
NYLON 6 CHIPS / GRANULES
2
MELAMINE CYANURATE
3
CALCIUM STEARATE
Total 800,000.00 18,161.18
Qty
UOM CIF (Rs.) CIF (Currency)
3226.500 K.G
372886.61 8388.90 US$
1905.500 K.G
215983.66 4859.03 US$
15.500 K.G
695.86
15.66 US$
Total 589,566.13 13,263.59
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Akulon - K225 KS 1 kg 1. Polyamide 6/Nylon 6 Chips/Granules
Unfilled
Flame
2. Flame Retardant (Non Haloganated)
Retardant
PA6
Melamine Cynurate
(Nylon 6) Compound
3. Mould Release Agent (Calcium
Stearate)
QTY
0.64010 kg
0.38110 kg
0.00310 kg
Case No.:221/24/87ALC1/2007
Party Name:DSM
ENGINEERING PLASTICS
(INDIA) PVT. LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00284/AM08/
RLA File
:31/24/040/00450/AM07/
Lic.No/Date:3110030276
10.08.2007
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No.
1
165
EXPORT ITEM
Qty
63/0- AKULON K225 KS
NATURAL
5000.000
UNFILLED FLAME RETARDANT
PA6 (NYLON 6 ) COMPOUND
Sl.No.
IMPORT ITEM
1
NYLON 6 CHIPS / GRANULES
2
MELAMINE CYNAURATE
3
CALCIUM STEARATE
UOM FOB (Rs.)
K.G
800000.00
FOB
(Currency)
18161.18
US$
Total 800,000.00 18,161.18
Qty
UOM CIF (Rs.) CIF (Currency)
3200.500 K.G
372886.61 8388.90 US$
1905.500 K.G
215983.66 4859.03 US$
15.500 K.G
695.86
15.66 US$
Total 589,566.13 13,263.59
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007, following
adhoc norms are approved:
125
EXPORT ITEM QTY
IMPORT ITEM
Akulon - K225 KS 1 kg 1. Polyamide 6/Nylon 6 Chips/Granules
Unfilled
Flame
2. Flame Retardant (Non Haloganated)
Retardant
PA6
Melamine Cynurate
(Nylon
6)
3. Mould Release Agent (Calcium Stearate)
Compound
Case No.:223/24/87ALC1/2007
Party Name:WELSET PLAST Meet No/Date:40/87EXTRUSIONS PVT.LTD.
ALC1/2007
13.02.2008
HQ File
:01/87/050/00286/AM08/
RLA File
:03/95/040/00367/AM08/
QTY
0.64010 kg
0.38110 kg
0.00310 kg
Status:Approved
Lic.No/Date:0310439238 Defer Date:
13.08.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
166
Sl.No.
1
2
3
EXPORT ITEM
63/0- PVC
COMPOUND(MEDICAL
GRADE)
IMPORT ITEM
PVC RESIN
PLASTICIZER
STABILIZER
Qty
UOM
50000.000
K.G
FOB (Rs.)
4515000.00
FOB
(Currency)
107500.00
US$
Total 4,515,000.00 107,500.00
Qty
UOM CIF (Rs.)
CIF (Currency)
27500.000 K.G
1120350.00 26675.00 US$
22500.000 K.G
1634850.00 38925.00 US$
2500.000 K.G
315000.00 7500.00 US$
Total 3,070,200.00 73,100.00
Decision: With D/o C&PC OM No. 46011/107/2007-PC.II dated 11.01.2008, following adhoc
norms are approved:
EXPORT ITEM
PVC Compound
(Medical Grade)
Case No.:225/24/87ALC1/2007
168 HQ File
:01/87/050/00292/AM08/
QTY
IMPORT ITEM
1 kg 1. PVC Resin
2. Plasticizer (Di Octyl Phthalate)
3. Stabilizer
QTY
0.5486 kg
0.4488 kg
0.0498 kg
Party Name: GUJARAT
RAFFIA INDUSTRIES LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:08/24/040/00075/AM08/
Lic.No/Date:0810066591 Defer Date:
14.08.2007
Application: Request is for adhoc norms for following:
Status:Approved
126
Sl.No.
1.
Sl.No.
1.
2.
3.
4.
5.
6.
7.
EXPORT ITEM
Laminated Plastic Sheetings Net Eyelets: 7050000 Nos.
IMPORT ITEM
Polyethylene Unlaminated Fabric 40-130 GSM
LDPE/LLDPE Granuels
Titanium Dioxide
Colour Pigment
Wax
U.V. Stabilizer
Aluminium Eyelets (Gromets)
Qty
300000.000 kg
Qty
198000.000 kg
122100.000 kg
5940.000 kg
924.000 kg
1518.000 kg
1518.000 kg
7120500 Number
Decision: With D/o C&PC OM No. 46011/153/2006-PC.II dated 03.01.2008, D/o C&PC
recommended the following norms:
EXPORT ITEM
QTY
IMPORT ITEM
Laminated Plastic Sheetings 1 MT 1. Polyethylene Unlaminated
(Laminated Tarpulins based
Woven Fabric (40-130 gsm)
on plastic woven fabric, Net
2. LDPE Granules
Eyelets - 7050000 Nos.)
3. Titanium Dioxide
4. Colour Pigment
5. Wax
6. UV Stabilizer
7. Aluminium Eyelets (Gromets)
QTY
0.6600 MT
0.4070 MT
0.0198 MT
0.0030 MT
0.0050 MT
0.0050 MT
Net + 1%
Wastage
Case No.:227/24/87ALC1/2007
Party Name:EXPANDED
INCORPORATION
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00293/AM08/
RLA File
:03/94/040/00458/AM08/
Lic.No/Date:0310439386 Defer Date:
14.08.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
169
1
EXPORT ITEM
62/0- Blended Polyol
Ecopuf X 642 b
Qty
7600.000
UOM
FOB (Rs.)
K.G 707940.00
Total 707,940.00
Sl.No.
1
2
IMPORT ITEM
Phthalic Anhydride
Diethylene Glycol
Qty
585.200
827.640
UOM
K.G
K.G
FOB (Currency)
17480.00 US$
17,480.00
CIF
CIF (Rs.)
(Currency)
35931.00 882.00 US$
40968.00 1005.00 US$
127
3
4
5
6
7
8
Propylene Oxide
1,1 Di-Chloro Fluro Ethane (HCFC
141b)
Pentamethyldiethylenetriamine
(PMDTA)
Dimethylcyclohexyalmine (DMCHA)
Silicon Surfactant
Catalyst
3347.800
K.G
217607.00 5340.00 US$
1938.000
K.G
116280.00 2853.00 US$
5.320
K.G
1303.00
32.00 US$
56.240
66.880
16.720
K.G
K.G
K.G
Total
5624.00
14379.00
7022.00
439,114.00
138.00 US$
353.00 US$
172.00 US$
10,775.00
Decision: With D/o C&PC OM No. 46011/77/2007-PC.II dated 28.07.2007, following adhoc
norms are approved:
EXPORT ITEM
Blended Polyol
(Ecopuf X 642 b)
QTY
IMPORT ITEM
1 kg
1. Phthalic Anhydride
2. Diethylene Glycol
3. Propylene Oxide
4. 1, 1 Dichloro Fluro Ethane (HCFC 141b)
5.Pentamethyldiethylenetriamine
6. Dimethylcyclohexyalmine
7. Silicone Surfactant
8. Catalyst (TMR-2)
QTY
0.0770 kg
0.1089 kg
0.4405 kg
0.2550 kg
0.0007 kg
0.0074 kg
0.0088 kg
0.0022 kg
Case No.:228/24/87ALC1/2007
Party Name:EXPANDED
INCORPORATION
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00294/AM08/
RLA File
:03/94/040/00459/AM08/
Lic.No/Date:0310439388 Defer Date:
14.08.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
170
1
62/0- PUFOL PE 7510
Blend of Aromatic Polyester
Polyol, Amino Polyols
Sl.No.
IMPORT ITEM
1
Phthalic Anhydride
2
Diethylene Glycol
18000.000
K.G
1432485.00
FOB
(Currency)
35370.00 US$
Total 1,432,485.00 35,370.00
Qty
UOM CIF (Rs.)
CIF (Currency)
4777.200 K.G
293320.00 7198.00 US$
7263.000 K.G
359519.00 8823.00 US$
128
3
4
5
6
Diethanolamine
Nonyl Phenol
Glycerine
Catalyst
2241.000
1746.000
329.400
15.480
K.G
K.G
K.G
K.G
Total
171437.00
167616.00
17129.00
8514.00
1,017,535.00
4207.00 US$
4113.00 US$
420.00 US$
209.00 US$
24,970.00
Decision: With D/o C&PC OM No. 46011/77/2007-PC.II dated 06.12.2007, following adhoc
norms are approved:
EXPORT ITEM
Pufol PE 7510
QTY
1 kg
1.
2.
3.
4.
5.
6.
IMPORT ITEM
Phthalic Anhydride
Diethylene Glycol
Diethanolamine
Nonyl Phenol
Glycerine
Catalyst
Case No.:244/24/87ALC1/2007
Party Name: PROPACK
Meet No/Date:40/87INDUSTRIES (PROP.
ALC1/2007
KUNAL PLASTICS PVT. 13.02.2008
LTD)
HQ File
:01/87/050/00307/AM08/
RLA File
:03/95/040/00423/AM08/
QTY
0.2654 kg
0.4035 kg
0.1245 kg
0.0970 kg
0.0183 kg
0.0008 kg
Status:Approved
Lic.No/Date:0310439472 Defer Date:
14.08.2007
Application: Request is for adhoc norms for following:
Sl.No.
172
1
EXPORT ITEM
Qty
63/0- POLYETHYLENE
WHITE OPAQUE
PRINTED BAGS (Net wt.
Of LDPE 21000
30000.000
Kgs,LLDPE 6600 Kgs &
White masterbatch 2400
Kgs)
Sl.No.
IMPORT ITEM
1
LDPE GRANULES
2
LLDPE GRANULES
WHITE
3
MASTERBATCH
UOM
K.G
FOB (Rs.)
2763900.00
FOB
(Currency)
66600.00
US$
Total 2,763,900.00 66,600.00
Qty
UOM CIF (Rs.) CIF (Currency)
22050.000 K.G
1555627.50 37485.00 US$
6930.000 K.G
488911.50 11781.00 US$
2520.000 K.G
240534.00
5796.00 US$
129
Total
2,285,073.00 55,062.00
Decision: Norms as per existing SION entry at Sl. No. H557 published through Public
Notice No. 88 (RE: 2007)/2004-2009 dated 05.12.2007, are approved.
Case No.:238/24/87ALC1/2007
Party Name:ALOK
Meet No/Date:40/87MASTERBATCHES LTD., ALC1/2007
13.02.2008
HQ File
:01/87/050/00303/AM08/
RLA File
:05/24/040/00421/AM08/
Status:Approved
Lic.No/Date:0510208038 Defer Date:
23.08.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
63/0- FILLER
MASTERBATCH ;
CONTAINING
a ) Polymer of Polyethylene
viz. LLDPE
contents 25%= 5000 Kgs.
b ) Relevant Fillers viz.
Calcium Carbonate
contents 75%= 15000 Kgs.
Qty
UOM
20000.000 K.G
179
FOB (Rs.)
484572.00
FOB
(Currency)
11950.00
US$
Total 484,572.00
Sl.No.
1
2
IMPORT ITEM
POLYMER OF POLYETHYLENE
VIZ.LLDPE
RELEVANT FILLERS VIZ.
CALCIUM CARBONATE
Qty
UOM
11,950.00
CIF
CIF (Rs.)
(Currency)
5150.000 K.G
311160.00 7673.50 US$
15450.000 K.G
92095.00
Total
2271.15 US$
403,255.00 9,944.65
Decision: With D/o C&PC OM No. 46011/36/2006-PC.II dated 20.04.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Filler/Calcium Carbonate Master 1 kg 1. LLDPE Granules
Batch (containing 25% LLDPE &
2. Filler/Calcium Carbonate
75% Filler/Calcium Carbonate)
QTY
0.2575 kg
0.7725 kg
130
Case No.:240/24/87ALC1/2007
Party Name:ALOK
MASTERBATCHES LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00304/AM08/
RLA File
:05/24/040/00422/AM08/
Lic.No/Date:0510208039 Defer Date:
23.08.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
180
EXPORT ITEM
Qty
UOM
FOB
(Currency)
FOB (Rs.)
63/0- FILLER MASTERBATCH
; CONTAINING
a ) Polymer of Polyethylene viz.
LLDPE
36000.000 K.G 894127.00
contents 25%= 9000 Kgs.
b ) Fillers viz. calcium Carbonate
contents 75%= 27000 Kgs.
Total 894,127.00
22050.00 US$
22,050.00
CIF
Sl.No.
IMPORT ITEM
Qty
UOM CIF (Rs.)
(Currency)
POLYMER OF POLYETHYLENE VIZ.
13626.90
1
9270.000 K.G
552571.00
LLDPE
US$
FILLERS VIZ. CALCIUM
2
27810.000 K.G
191708.00 4727.70 US$
CARBONATE
Total
744,279.00 18,354.60
Decision: With D/o C&PC OM No. 46011/36/2006-PC.II dated 20.04.2007, following adhoc
norms are approved:
EXPORT ITEM
QTY
Filler/Calcium Carbonate Master 1 kg
Batch (containing 25% LLDPE &
75% Filler/Calcium Carbonate)
IMPORT ITEM
1. LLDPE Granules
2. Filler/Calcium Carbonate
QTY
0.2575 kg
0.7725 kg
Case No.:11/25/87ALC1/2007
Party Name:TECHNOVA
IMAGING SYSTEMS
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
189 :01/87/050/00339/AM08/
RLA File
:03/95/040/00489/AM08/
Lic.No/Date:0310441011 Defer Date:
28.08.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
131
(Currency)
1
Sl.No.
63/0- INKJET
CLEAR FILM (100
MICRON)
100000.000
IMPORT ITEM
Sq.
meter
5600000.00
Total
5,600,000.00
136585.37
US$
136,585.37
CIF
Qty
UOM
CIF (Rs.)
(Currency)
49097.56
111000.000 Sq. meter 2013000.00
US$
21853.66
0.000
K.G
896000.00
US$
1
POLYESTER FILM (100
MICRON)
2
COATING CHEMICALS
3
CONSUMABLES NAMELY
0.000
GROOVED ROD
K.G
39200.00
956.10 US$
Total
2,948,200.00 71,907.32
Decision: With D/o C&PC OM No. 46011/126/2007-PC.II dated 11.01.2008,
following adhoc norms are approved:
EXPORT ITEM
Inkjet Clear Film
(100 Micron)
QTY
IMPORT ITEM
1 Sq. Polyester Film (100 Micron)
Meter
QTY
1.10 Sq.
Meter
Case No.:2/25/87-ALC1/2007
Party Name:ALOK
MASTERBATCHES LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00327/AM08/
RLA File
:05/24/040/00433/AM08/
Lic.No/Date:0510208254
29.08.2007
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No.
190
1
EXPORT ITEM
63/0- FILLER
MASTERBATCH;CONTAINING
a ) Polymer of Polyethylene viz.
LLDPE
contents 25%=5250 Kgs.
b ) Relevant Fillers viz. Calcium
Carbonate
contents 75%=15750 Kgs.
Qty
21000.000
UOM
FOB (Rs.)
FOB
(Currency)
585136.00
14430.00
US$
Total 585,136.00
14,430.00
K.G
132
Sl.No.
1
2
IMPORT ITEM
POLYMER OF POLYETHYLENE VIZ.
LLDPE
RELEVANT FILLERS VIZ. CALCIUM
CARBONATE
Qty
UOM CIF (Rs.)
CIF (Currency)
5407.500 K.G
350839.00 8652.00 US$
16222.500 K.G
124986.00 3082.28 US$
Total 475,825.00 11,734.28
Decision: With D/o C&PC OM No. 46011/36/2006-PC.II dated 20.04.2007, following adhoc
norms are approved:
EXPORT ITEM
QTY
Filler/Calcium
Carbonate 1 kg
Master Batch (containing 25%
LLDPE & 75% Filler/Calcium
Carbonate)
IMPORT ITEM
1. LLDPE Granules
2. Filler/Calcium Carbonate
Case No.:10/25/87ALC1/2007
Party Name:PUNEET RESINS Meet No/Date:40/87LTD.,
ALC1/2007
13.02.2008
HQ File
:01/87/050/00338/AM08/
RLA File
:03/95/040/00310/AM08/
QTY
0.2575 kg
0.7725 kg
Status:Approved
Lic.No/Date:0310441447 Defer Date:
30.08.2007
Application: Request is for adhoc norms for following:
Sl.No.
191
1
Sl.No.
1
2
3
EXPORT ITEM
Qty
62/0- VINOPRENE IN DIFFERENT
GRADES LIKE: 700 TO 799 SERIES
CONTAINING: 1) 59% ACRYLONITRILE
86.400
BUTADIENE RUBBER (NBR)
2) 27% PVC RESIN
3) 7% DIOCTYL PHTHALATE
IMPORT ITEM
Acrylonitrile Butadiene Rubber
(NBR)
PVC Resin
Dioctyl Phthalate (DOP)
Qty
UOM
M.T
FOB (Rs.)
6682500.00
FOB
(Currency)
165000.00
US$
Total 6,682,500.00 165,000.00
UOM CIF (Rs.)
CIF (Currency)
50.976 M.T
4389050.00 107050.00 US$
23.328 M.T 956448.00 23328.00 US$
6.048 M.T 421562.00 10282.00 US$
Total 5,767,060.00 140,660.00
133
Decision: With D/o C&PC OM No. 46011/124/2006-PC.II dated 16.07.2008, following adhoc
norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Vinoprene 700 to 799 Series 1 kg 1. Nitrile Butadiene Rubber
(containing 59% NBR, 27%
(NBR)
PVC Resin and 7% DOP)
2. PVC Resin
3. Dioctyl Phthalate Plasticizer
Case No.:20/26/87ALC1/2007
196 HQ File
:01/87/050/00359/AM08/
Party Name:TECHNOVA Meet No/Date:40/87IMAGING SYSTEMS
ALC1/2007
PVT. LTD.,
13.02.2008
RLA File
:03/95/040/00506/AM08/
QTY
0.59 kg
0.27 kg
0.07 kg
Status:Approved
Lic.No/Date:0310442288 Defer Date:
10.09.2007
Decision: Case is approved in the NC Meeting No. 39/08 dated 06.02.2008.
Case No.:25/26/87-ALC1/2007 Party Name:CORONET
PRODUCTS PVT. LTD,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00364/AM08/
Lic.No/Date:3410019619 Defer Date:
12.09.2007
RLA File
:34/24/040/00101/AM08/
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
1.
Tooth Brushes (Interdental Twisted Brush Friscodent)
Sl.No.
IMPORT ITEM
1.
Twisted Brush ( Interdental Twisted Brush)
2.
Relevant Polymer (Polypropylene Granules)
202
Polypropylene
3.
Relevant Polymer (Thermoplastic ElastomerTPE)Thermoplastic Elastomer
4.
Colour Master Batch for Polypropylene Granules
5.
Colour Master Batch for TPE-Thermoplastic Elastomer
Qty
400000.000 Set
Qty
2520000.000 No.
4592.640 kg
1622.400 kg
146.880 kg
48.960 kg
Decision: With D/o C&PC OM No. 46011/104/2006-PC.II dated 28.01.2008, following adhoc
norms are approved:
EXPORT
QTY
IMPORT ITEM
ITEM
Tooth Brushes 1 kg 1. Relevant Twisted Brush
QTY
Net + 5% Wastage
134
(Interdental
Twisted Brush
Friscodent)
(Interdental Twisted Brush)
2. Relevant Thermoplastic
Elastomer
3. Colour Master Batch for TPE
4. Polypropylene Granules
5. Colour Master Batch for PP
1.04 kg/kg of TPE
content in export
product
0.02 kg/kg of TPE
content in export
product
1.04 kg/kg of PP
content in export
product
0.02 kg/kg of PP
content in export
product
Case No.:26/26/87-ALC1/2007 Party Name:CORONET
PRODUCTS PVT. LTD,
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00365/AM08/
Lic.No/Date:3410019620
12.09.2007
Defer Date:
RLA File
:34/24/040/00121/AM08/
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
63/0- Tooth Brushes (
Interdental Twisted BrushPerlodent)
Qty
UOM
200000.000
Set
FOB (Rs.)
5188800.00
FOB
(Currency)
94000.00
EURO
Total 5,188,800.00
203
Sl.No.
1
2
3
4
IMPORT ITEM
Twisted Brush
Interdental Twisted Brush
Relevant Polymer (
Polypropylene Granules)
Polypropylene
Relevant Polymer (
Thermoplastic ElastomerTPE)
Thermoplastic Elastomer
Colour Master Batch for
Polypropylene Granules
Master Batch for Colour
Qty
UOM
1260000.000 Number
94,000.00
CIF
CIF (Rs.)
(Currency)
39304.81
2205000.00
EURO
1297.920
K.G
97344.00
1735.19
EURO
811.200
K.G
178464.00
3181.18
EURO
36.720
K.G
11016.00
196.36
EURO
135
5
Colour Master Batch for
TPE- Thermoplastic
Elastomer
Master Batch for Colour
24.480
130.91
EURO
K.G
7344.00
Total
2,499,168.00 44,548.45
Decision: With D/o C&PC OM No. 46011/104/2006-PC.II dated 28.01.2008, following adhoc
norms are approved:
EXPORT ITEM QTY
IMPORT ITEM
Tooth
Brushes 1 kg 1. Relevant Twisted Brush
(Interdental
(Interdental Twisted Brush)
Twisted
Brush
2. Relevant Thermoplastic
Perlodent)
Elastomer
3. Colour Master Batch for
TPE
4. Polypropylene Granules
5. Colour Master Batch for PP
QTY
Net + 5% Wastage
1.04 kg/kg of TPE content
in export product
0.02 kg/kg of TPE content
in export product
1.04 kg/kg of PP content in
export product
0.02 kg/kg of PP content in
export product
Case No.:27/26/87ALC1/2007
Party Name:IMPERIAL
WATER PROOFING
INDUSTRIES PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00366/AM08/
RLA File
:03/94/040/00519/AM08/
Lic.No/Date:0310442985 Defer Date:
13.09.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
205
1
Sl.No.
1
EXPORT ITEM
Qty
UOM
62/0- SYNTHETIC
RUBBER NITRILE
RUBBER (NBR) AND PVC
200000.000
BASED RUBBER
COMPOUNDED SHEETS.
(NBR MIN. 67.30%)
IMPORT ITEM
ACRYLO NITRILE
BUTADIENE RUBBER
(NBR)
Qty
K.G
FOB (Rs.)
15960000.00
FOB
(Currency)
380000.00
US$
Total 15,960,000.00
380,000.00
UOM
CIF (Rs.)
CIF (Currency)
136000.000 K.G
11995200.00 285600.00 US$
136
DIOCTYL PHTHALATE
(DOP)
2
16728.000 K.G
1194396.00
Total
28438.00 US$
13,189,596.00 314,038.00
Decision: With D/o C&PC OM No. 46011/14/2005-PC.II dated 19.03.2007, following adhoc
norms are approved:
EXPORT ITEM
PVC Nitrile Rubber Blend in
Sheet Form (containing
minimum 67.3% NBR)
QTY
IMPORT ITEM
1 kg 1. Nitrile Butadiene Rubber
(NBR)
2. Dioctyl Phthalate (DOP)
QTY
0.68000 kg
0.08364 kg
Case No.:36/26/87ALC1/2007
Party Name:KAMSONS
CHEMICALS PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00375/AM08/
RLA File
:03/94/040/00537/AM08/
Lic.No/Date:0310443469 Defer Date:
18.09.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
62/0- STYRENE & ACRYLATE
COPOLYMER EMULSION
STABILIZED WITH
EMULSIFIER (KAMICRYL 400)
HAVING SOLID CONTENT OF
57+/-1%
1
206
Sl.No.
1
2
3
4
IMPORT ITEM
Butyl Acrylate Monomer
Styrene Monomer
Acrylic Acid
Acrylamide
Qty
UOM
18000.000
Qty
8730.000
1206.000
216.000
126.000
K.G
FOB (Rs.)
1129140.00
FOB
(Currency)
27540.00
US$
Total 1,129,140.00 27,540.00
UOM CIF (Rs.) CIF (Currency)
K.G
608481.00 14841.00 US$
K.G
70214.00 1712.52 US$
K.G
14169.50 345.60 US$
K.G
11623.50 283.50 US$
Total 704,488.00 17,182.62
Decision: With D/o C&PC OM No. 46011/4/2006-PC.II dated 20.06.2006, following adhoc
norms are approved:
EXPORT ITEM
Styrene & Acrylate
QTY
IMPORT ITEM
1 kg 1. Butyl Acrylate Monomer
QTY
0.485 kg
137
Copolymer Emulsion with
Emulsifier (Kamicryl-400,
Solid Content 57 +/- 1%
Case No.:39/26/87ALC1/2007
2. Styrene Monomer
3. Acrylic Acid
4. Acrylamide
Party Name:PIDILITE
INDUSTRIES LIMITED
HQ File
RLA File
:01/87/050/00378/AM08/ :03/95/040/00122/AM08/
0.067 kg
0.012 kg
0.007 kg
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
Lic.No/Date:0310443513 Defer Date:
18.09.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
62/0- STYRENE
ACRYLATE COPOLYMER
8000.000
IN THE SOLUTION FORM
(KONDICRYL SV719X)
Sl.No.
IMPORT ITEM
1
STYRENE
207
METHYL
2
METHACRYLATE
3
BUTYL ACRYLATE
UOM FOB (Rs.)
FOB
(Currency)
K.G
13000.00
US$
Qty
585000.00
Total 585,000.00 13,000.00
Qty
UOM CIF (Rs.) CIF (Currency)
2400.000 K.G
119988.00 2640.00 US$
528.000 K.G
41036.00
902.88 US$
1016.000 K.G
Total
63725.00 1402.08 US$
224,749.00 4,944.96
Decision: With D/o C&PC OM No. 46011/65/2005-PC.II dated 25.08.2006,
following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Styrene-Acrylate
1 kg 1. Styrene
Copolymer
in
the
2. Methyl
solution form having
Methacrylate
Solid Content 50 +/- 1%
3. Butyl Acrylate
(Kondicryl SV 719 X)
208
QTY
0.3060 kg
0.0660 kg
0.1270 kg
Case No.:40/26/87ALC1/2007
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
RLA File
Lic.No/Date:0310443526 Defer Date:
Status:Approved
138
:01/87/050/00379/AM08/
:03/95/040/00267/AM08/
18.09.2007
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
63/0- ACRYLATE
COPOLYMER IN POWDER
1
15600.000 K.G
FORM (KONDICRYL PRL
166)
Total
Sl.No.
IMPORT ITEM
Qty
UOM
METHYL METHA
1
7706.400 K.G
ACRYLATE
N BUTYL
2
7706.400 K.G
METHACRYLATE
Total
FOB (Rs.)
2220300.00
FOB
(Currency)
49340.00
US$
2,220,300.00 49,340.00
CIF (Rs.)
CIF (Currency)
777568.00
17108.21 US$
802086.00
17647.66 US$
1,579,654.00 34,755.87
Decision: With D/o C&PC OM No. 46011/65/2005-PC.II dated 10.02.2006, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Acrylate Copolymer in Powder 1 kg
1. Methyl Methacrylate
Form (Kondicryl PRL 166)
2. N. Butyl Methacrylate
Case No.:46/26/87ALC1/2007
Party Name:DSM
ENGINEERING
PLASTICS (INDIA)
PVT. LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
QTY
0.4892 kg
0.4892 kg
Status:Approved
HQ File
RLA File
Lic.No/Date:3110030853 Defer Date:
213 :01/87/050/00385/AM08/ :31/24/040/00202/AM08/ 20.09.2007
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
FOB
(Currency)
139
1
Sl.No.
1
2
3
4
5
63/0- AKULON
K222 KGV4 H GREY
20 % GLASS FIBER
REINFORCED
FLAME RETARDANT 80000.000 K.G 11760000.00
PA6
(NYLON 6)
COMPOUND IN
GREY COLOUR
Total 11,760,000.00
IMPORT ITEM
NYLON 6 CHIPS/
GRANULES
BASE POLYMER (Net
content should not be less
than 52031 kgs.in the R.P.)
GLASS FIBER (CHOPPED
STRAND)
REINFORCING AGENT
(Net content should not be
less than 16000 kgs.in the
R.P.)
BLACK MASTERBATCH
PE 48/93
RELEVANT COLOURANT
(Net content should not be
less than 800 kgs.in the
R.P.)
MELAMINE CYNAURATE
FLAME RETARDANT (Net
content should not be less
than 9600 kgs.in the R.P.)
CALCIUM STEARATE
MOULD RELASING
AGENT (Net content should
not be less than 1569 kgs.in
the R.P.)
Qty
UOM
293266.83
US$
293,266.83
CIF
CIF (Rs.)
(Currency)
53592.000 K.G
5644041.48
136659.60
US$
16480.000 K.G
714655.20
17304.00
US$
824.000
K.G
125915.44
3048.80
US$
9888.000 K.G
632980.32
15326.40
US$
1616.000 K.G
100111.20
2424.00
US$
Total
7,217,703.64 174,762.80
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007,
following adhoc norms are approved:
140
EXPORT ITEM
Akulon – K222 KGV4
20% Glass Fiber
Reinforced, Flame
Retardant PA6 (Nylon 6)
Compound
QTY
IMPORT ITEM
1 kg 1. Polyamide 6/Nylon 6
Chips/Granules
2. Glass Fiber
3. Relevant Colourant
(Pigments/Masterbatch)
4. Flame Retardant (Non
Haloganated) Melamine
Cynurate
5. Mould Release Agent
(Calcium Stearate)
Case No.:47/26/87ALC1/2007
Party Name:
Meet No/Date:40/87T.K.H.PLASTICS PVT.LTD., ALC1/2007
13.02.2008
HQ File
:01/87/050/00386/AM08/
RLA File
:09/24/040/00272/AM08/
QTY
0.66990 kg
0.20600 kg
0.01030 kg
0.12360 kg
0.02020 kg
Status:Approved
Lic.No/Date:0910031558 Defer Date:
20.09.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
Sl.No.
214
1
2
3
4
EXPORT ITEM
63/0- Musketeer
Cap
Plastic Component
Qty
UOM
FOB (Rs.)
100000.000 Number 1133000.00
IMPORT ITEM
Double Wall Closure
Transparent without Valve
without 2124
"Musketeer 300ml"
(Cap Body - 2123)
2123 F1335900
Plastic Component
Transport security Red
for Double wall Closure
(Lid - 2124)
2124 F1335900
Plastic Component
Retaining Ring - 2000
(Klemmring natur)
2000 H6666600
Plastic Component
Simpli Squeeze Valve
FOB (Currency)
27433.41 US$
Total
1,133,000.00
27,433.41
Qty
UOM
CIF (Rs.) CIF (Currency)
100000.000 Number
491500.00
11900.73 US$
100000.000 Number
217956.00
5277.38 US$
100000.000 Number
121968.00
2953.22 US$
100000.000 Number
186093.00
4505.88 US$
141
V1 - 187
V1 187H6666600
Component
Total
1,017,517.00 24,637.21
Decision: With D/o C&PC OM No. 46011/02/2007-PC.II dated 03.01.2008, following
adhoc norms are approved:
EXPORT ITEM
Musketeer Cap
QTY
1 No.
1.
2.
3.
4.
IMPORT ITEM
Double Wall Closure
Transparent without Valve
Transport Security Lid
for Double Wall Closure
Retaining Ring
Simpli Squeeze Valve
QTY
Net to Net
Net to Net
Net to Net
Net to Net
Case No.:50/26/87ALC1/2007
Party Name:SHAKUN
POLYMERS LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00389/AM08/
RLA File
:34/24/040/00136/AM08/
Lic.No/Date:3410019695 Defer Date:
25.09.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
217
Sl.No.
1
2
3
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- EVA BASED
THERMOSETTING
HFFR INSULATION 50000.000 K.G 5200000.00
AND SHEATHING
COMPOUND
Total 5,200,000.00
IMPORT ITEM
ETHYLENE VINYL
ACETATE (EVA)
ALUMINIUM
HYDROXIDE
SILANE
Qty
UOM
13300.000 K.G
29650.000 K.G
1500.000 K.G
Total
FOB
(Currency)
5200000.00
Indian
Rupees
5,200,000.00
CIF
CIF (Rs.)
(Currency)
33250.00
1363250.00
US$
29650.00
1215650.00
US$
22500.00
922500.00
US$
3,501,400.00 85,400.00
142
Decision: With D/o C&PC OM No. 46011/27/2005-PC.II dated 11.01.2008,
following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
EVA Based Thermosetting 1 kg 1. Ethylene Vinyl Acetate
HFFR
Insulation
and
2. Aluminium Hydroxide
Sheathing Compound
3. Silane
Case No.:51/26/87ALC1/2007
HQ File
218 :01/87/050/00390/AM08/
QTY
0.266 kg
0.593 kg
0.030 kg
Party Name:JINDAL
POLY FILMS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00838/AM06/
Lic.No/Date:0510209488 Defer Date:
26.09.2007
Status:Approved
Decision: Case withdrawn as it is subsumed with three other cases of firm listed as
Case No. A-544 in Manual Cases for allowing import of ‘PTA’ in lieu of ‘DMT’ as
requested by firm.
Case No.:52/26/87ALC1/2007
Party Name:L M
GLASFIBER (INDIA)
PVT LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
RLA File
:01/87/050/00391/AM08/ :07/24/040/00438/AM08/
Status:Approved
Lic.No/Date:071005357 Defer Date:
3
27.09.2007
Application: Request is for adhoc norms for following:
Sl.No
.
1
220
Sl.No
.
1
2
3
4
EXPORT ITEM
63/0- FRP ROTOR BLADES LM
34.0P
IMPORT ITEM
Qty
UOM
FOB (Rs.)
48.000 Number
122010193.62
Total
122,010,193.62
Qty
GELCOAT UP TYPE A SPRAY RAL 7035
(NORPOL GFA 80087 S; 0225MDOB) 7200.000
(ITEM CODE: 000507)
WOVEN ROVING 1200 (90/10), 40CM.
8496.000
(IITEM CODE: 001607)
COMBI 600 (300/300,50/50) STITCHED
331.680
95CM (ITEM CODE: 002307)
VINYL ESTER ADHESIVE, VE, TYPE A, 21600.00
GT60 (NORPOL FI-184 ADHESIVE VE
0
UOM
CIF (Rs.)
FOB
(Currency)
2210329.60
EURO
2,210,329.60
CIF
(Currency)
K.G 1073018.58 26535.60 US$
K.G
717482.36 17693.77 US$
K.G
53974.69 1331.07 US$
K.G 4662747.18
114987.60
US$
143
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
TYPE A GT 60) (ITEM CODE: 002807
PEROXIDE UP CAT AA 25/30 KG (ITEM
CODE: 005307)
WOVEN ROVING COMBI 1250, 60CM
(ITEM CODE: 005907)
PEROXIDE VE CAT VV 25/30 KG
(ANDONOX CHM-50, 25 KG) (ITEM
CODE: 007107)
WOVEN ROVING COMBI 900 (600/300,
50/50) STITCHED 125CM (ITEM CODE:
010607)
GELCOAT FILLER, UP, TYPE A, RAL
7035 (NORPOL SP 1399; 0020 MCOB,
013107) (ITEM CODE: 013107)
GELCOAT, UP, TYPE A, BRUSH, RAL
7035 (NORPOL GFA 80087 H D; 0020
MCOB ) (ITEM CODE: 018607)
SIKA 208 CLEANING FLUID - 1.0 LITRE
(ITEM CODE: 020516)
POLYESTER, HAND LAY-UP, GT80
(ITEM CODE: 021207)
BALSA GS COATED 150KG/M3, 15.9 MM
(SB10015.9CKAL-SB100 15.9 CK
AL600/10) (ITEM CODE: 026607)
WOVEN ROVING 450 (50/50), 20CM
(ITEM CODE: 029607)
WOVEN ROVING COMBI 1250, 50 CM
(ITEM CODE: 029807)
POLYESTER VARTM TYPE A GT95
(ITEM CODE: 029907)
DIRECT ROVING, SPUN, 4000 TEX
(SPUN ROVING 4000 TEX) (ITEM CODE:
030007)
COMBI 900 (600/300, PLUS OR MINUS
45 DEGREES),STITCHED, 125CM (ITEM
CODE: 031407)
CONTINUOUS FILAMENT MAT 225, 135
CM (ITEM CODE: 031607)
BALSA, GS, COATED, 150KG/M3, 19.1
MM (ITEM CODE: 032907)
PEEL PLY, PS, 85G/M2, 50CM (ITEM
CODE: 035207)
PEEL PLY, PS, 85G/M2, 20CM (ITEM
CODE: 035307)
192.000
K.G
24230.34
950.400
K.G
93336.93 2301.77 US$
633.600
K.G
139479.34 3439.69 US$
3263.520
K.G
368502.09 9087.60 US$
240.000
K.G
52457.09 1293.64 US$
792.000
K.G
132560.49 3269.06 US$
32.640
Cans
3761.280
K.G
2400.480
288.000
68961.60
0
15206.40
0
36545.92
597.54 US$
901.26 US$
351543.13 8669.37 US$
Sq. meter 2789096.86 68781.67 US$
K.G
61350.14 1512.95 US$
K.G 6772583.92
167018.10
US$
K.G 1435675.23 35405.06 US$
566.400
K.G
116893.19 2882.69 US$
2746.560
K.G
394828.45 9736.83 US$
6385.920
K.G 1336099.44 32949.43 US$
792.960
Sq. meter
820133.39 20225.24 US$
2160.000
Meter
95304.50 2350.30 US$
11712.00
0
Meter
183367.23 4522.00 US$
144
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
COMBI 600 (300/300,50/50),STITCHED,
21 CM (ITEM CODE: 035607)
CONTINUOUS FILAMENT MAT 225,
41CM (ITEM CODE: 035907)
UNIAXIAL 600 (90 DEGREES), 63 CM
(ITEM CODE: 036107)
BALSA, GS, COATED, 150KG/M3, 12.7
MM (ITEM CODE: 045707)
WOVEN ROVING 1200 (90/10) 20 CM
(ITEM CODE: 046507)
CONTINUOUS FILAMENT MAT 450,
50CM (ITEM CODE: 046607)
BALSA, GS, COATED, 150KG/M3, 25.4
MM (ITEM CODE: 050907)
FIBERLINE TRIANGLES F. BUSHING
(ITEM CODE: 064108)
BALSA, GS, COATED, 150KG/M3, 19.125.4 MM (ITEM CODE: 064207)
BALSA, GS, COATED, 150KG/M3, 15.919.1 MM (ITEM CODE: 064307)
BALSA, GS, COATED, 150KG/M3, 12.715.9 MM (ITEM CODE: 064407)
BALSA, GS, COATED, 150KG/M3, 6.412.7 MM (ITEM CODE:064507)
COMBI 600 (300/300,50/50) POWDER 95
CM (ITEM CODE: 066607)
PVC-FOAM 80KG/M3, 60 MM (ITEM
CODE: 086107)
PEROXIDE UP CAT FF VR 25/30 KG
(ITEM CODE:089407)
PERFORATED FILM W=1450 MM (ITEM
CODE: 092207)
POLYESTER VARTM TYPE B GT 150
(POLYLITE 413-577) (ITEM CODE:
094007)
PVC FOAM H80 60G16 2440X1220X60
MM (ITEM CODE: 094307)
GLASS ROLLE 0.09 X 150 METER (ITEM
CODE: 128606)
FOAM INSERT FOR LIGHTNING BLOCK
(ITEM CODE: 137706)
50 MM SQUARE CABLE ACCORDING
TO DIN 46438 (ITEM CODE: 302001)
PLASTIC SPIRAL DIA 12 MM (ITEM
2572.800
K.G
127.680
K.G
36345.52
896.31 US$
142.560
K.G
17179.41
423.66 US$
144.480
Sq. meter
141205.52 3482.26 US$
2880.000
K.G
243214.36 5997.89 US$
2476.320
K.G
488738.80 12052.74 US$
2129.760
483368.04 11920.30 US$
Sq. meter 3315229.64 81756.59 US$
5184.000
Number
637003.00 15709.08 US$
76.800
Sq. meter
139588.65 3442.38 US$
45.120
Sq. meter
75950.29 1873.00 US$
33.120
Sq. meter
46527.04 1147.40 US$
26.880
Sq. meter
34445.35
284.640
K.G
46319.81 1142.29 US$
11.520
Sq. meter
51315.50 1265.49 US$
1824.000
K.G
396279.45 9772.61 US$
10560.00
0
Sq. meter
138625.34 3418.63 US$
84000.00
0
K.G 7930655.46
849.45 US$
195577.20
US$
12.960
Sq. meter
51974.06 1271.73 US$
39.840
Coil/Roll
67686.24 1669.20 US$
48.000
Set
64815.12 1598.40 US$
1545.600
M.T
427506.17 10542.69 US$
13056.00
M.T
161049.81 3971.64 US$
145
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
CODE: 307001)
TACKY TAPE, A970-005 15 METER
(ITEM CODE: 307201)
BIAXIAL 806 (PLUS OR MINUS 45
DEGREES), 125CM (ITEM CODE:
315601)
VACUUM BAG 2000MM LFT (ITEM
CODE: 338501)
BALSA, GS, COATED, 150KG/M3, 6.4
MM (ITEM CODE: 363417)
SHRINK FLEX HDT A 38-12 L=250MM
(ITEM CODE: 381801)
BUSHING COMPLETE M30 (ITEM
CODE: 383501)
CONTINUOUS FILAMENT MAT 450, 135
CM (ITEM CODE: 403217)
VACUUM BAG 3000 MM LFT (ITEM
CODE: 410301)
PVC-FOAM, 80KG/M3, 40MM (ITEM
CODE: 414117)
COMPLETE FLANGE FOR LM 37.3 P
(ITEM CODE: 416401)
PULTRUSION LM 37.3 P (ITEM CODE:
428001)
PULTRUSION SMALL LM 37.3 P (ITEM
CODE: 428101)
TEROTEX WAX-SPRAY CLEAR (ITEM
CODE: 449617)
LIGHTNING CONDUCTOR LM 37.3 P
(ITEM CODE: 429801)
COMPLETE TERMINAL (ITEM CODE:
446801)
PLASTIC COVER 745 X 530 (ITEM
CODE: 456901)
COMBI 900 (600/300,90/10),STITCHED,
125 CM (ITEM CODE: 462517)
25-40 MM GREY SHAFT NET 1A FOR
DIA 30 BOLTS (ITEM CODE: 464701)
PVC-FOAM H100 40 MM NO. TISSUE
(C709040-C70.90 SHEETS 40 MM) (ITEM
CODE: 480317)
CSM 300 POWDER 10CM (ITEM CODE:
497001)
PUR-FLEX HD 2250 ISOCYA 500 KG BIG
0
20671.20
0
56114.40
0
3360.000
2212.800
48.000
2592.000
M.T
166721.39 4111.50 US$
K.G 5803734.51
Meter
143125.39
US$
765168.77 18869.76 US$
Sq. meter 1322785.51 32621.10 US$
Number
84009.15 2071.74 US$
Number 1944598.52 47955.57 US$
100.800
K.G
19910.94
491.02 US$
5856.000
Meter
727912.34 17950.98 US$
214.560
Sq. meter
720393.78 17765.57 US$
48.000
Number 2429094.10 59903.68 US$
2496.000
Number 3247048.32 80075.17 US$
192.000
Number
137274.92 3385.32 US$
48.000
Number
48.000
Number
144858.29 3572.34 US$
144.000
Number
176811.34 4360.33 US$
48.000
Number
188286.17 4643.31 US$
226.560
K.G
34933.60
861.49 US$
528.000
Meter
27217.97
671.22 US$
199.680
Sq. meter
253.440
K.G
2226.240
K.G
23167.03
571.32 US$
925562.72 22825.22 US$
33504.34
826.25 US$
486911.05 12007.67 US$
146
66
67
68
69
70
71
72
73
74
BAGS (ITEM CODE: 500601
INLET GATE FOR OMEGA PROFILE
576.000
(ITEM CODE: 501201)
WEIGHING CHAMBER NET (ITEM
192.000
CODE: 505201)
STAINLESS AISI 304 TYPE LM 34.0 P
96.000
(ITEM CODE: 513501)
STAY BOLT M30 X 475 THIN SHAFT
2592.000
(ITEM CODE: 523601)
STAY BOLTS FOR WEB LM 34.0 P/P2
48.000
(ITEM CODE: 543001)
8/12 MM SILICONE HOSE, NATURAL
302.400
COLOUR (ITEM CODE: 561716)
RUBBER GASKET, COMPRESSION
48.000
MOULDED (ITEM CODE: 571527)
SILICONE INSERT FOR PRE-MOULDED
2.400
TE ADH (ITEM CODE: 690427)
INLET PROFILE PP 4M (ITEM CODE:
5760.000
709127)
Number
Number
30880.03
761.53 US$
462107.28 11395.99 US$
Number
23123.23
570.24 US$
Number
1229.74
30.33 US$
Set
Meter
786780.23 19402.72 US$
40281.72
993.38 US$
Number
49280.51 1215.30 US$
Number
130167.48 3210.05 US$
Number
599886.52 14793.75 US$
Total
58,239,874.5
1,436,312.42
7
Decision: With D/o C&PC OM No. 46011/211/2005-PC.II dated 31.01.2007, following adhoc
norms are approved:
EXPOR
T ITEM
FRP
ROTOR
BLADE
S LM
34.0P
(Weight
of one
set =
16950
KGS +/3%)
IMPORT ITEM
QTY
1 Set
(consistin
g of 3
Nos. of
Blades)
QTY
PVC FOAM
1
PVC-FOAM 80KG/M3, 60MM
2
FOAM LIST, 10X15 MM
3
PVC-SKUM H100 40MM U.V/EV
4
INLET GATE FOR OMEGA PROFILE
GLASS FIBER, ROVINGS / COMBI MAT/ CONTINUOUS
FILAMENT MAT
5 WOVEN ROVING 1200 40CM
6 COMBI 600 50/50 95 CM
7 WOVEN ROVING COMBI 1250, 60CM
8 WOVEN ROVING COMBI 900 (600/300) STITCHED
125CM
9 WOVEN ROVING 450 (50/50), 20CM
0.72
SQ.METE
R
120
METER
12.48
SQ.METE
R
36 NOS
531 KG
20.73 KG
59.4 KG
203.97 KG
18 KG
147
10
11
12
13
WOVEN ROVING COMBI 1250, 50CM
DIRECT ROVING, SPUN 4000 TEX
COMBI 900 (600/300,±45°),STITCHED, 125CM
COMBI 600 (300/300,50/50),STITCHED 21CM
4310.1 KG
35.4 KG
171.66 KG
160.8 KG
14
15
16
17
18
19
CONTINUOUS FILAMENT MAT 225, 41CM
UNIAXIAL 600 (90°), 63CM
ROVING 1200 (90/10) B=20
CONTINUOUS FILAMENT MAT 450, 50CM
COMBI 600 (300/300,50/50) POWDER 95 CM
GLASS ROLLE 0.09X150 METER
20
BIAXIAL 806 (±45°), 125CM
21
22
COMBI 900 (600/300,90/10) STITCHED 125CM
CSM 300. PULVERBUNDET. 10CM
7.98 KG
8.91 KG
180 KG
154.77 KG
17.79 KG
2.49
ROLL
3507.15
KG
14.16 KG
15.84 KG
UNSATURATED POLYESTERS, GEL COATS, VINY ESTER
ADHESIVES
23 NORPOL GFA 80087 S; 0225 MDOB
24 VINYL ESTER ADHESIVE VE TYPE A GT60 (NORPOL
FI-184)
25 GELCOAT FILLER UP TYPE A RAL 7035 (NORPOL SP
1399)
26 GELCOAT, UP, TYPE A, BRUSH, RAL 7035 (NORPOL
GFA 80087 HD)
27 POLYESTER, HAND LAY-UP, GT80
28 POLYESTER VARTM TYPE A GT80/95 (POLYLITE 413587)
29 POLYESTER VARTM TYPE B GT150/4 (POLYLITE 413577)
30
31
PEROXIDES
PEROXIDE UP TYPE A 25 KG (ANDONOX KP-9)
450 KG
1350 KG
15 KG
49.5 KG
235.08 KG
950.4 KG
5250 KG
12 KG
32
PEROXIDE VE TYPE V 25KG HARDNER - 24
(ANDONOX CHM-25)
PEROXIDE MCP 75 (NOROX MCP-75 FRED)
39.6 KG
33
ADHESIVES, NORPOL, PURPLEX
PUR-FLEX HD 2250 RESIN
34
PUR-FLEX HD 2250 ISOCYA
10.86 KG
35
PROCESSING CONSUMABLES
SIKA 208 CLEANING FLUID 250 ML
2.04 TIN
36
37
CONTINUOUS FILAMENT MAT 225 138 CM
PEEL PLY, PS, 85G/M2, 50CM
38
PEEL PLY, PS, 85G/M2, 20CM
114 KG
139.14 KG
399.12 KG
135
R.METER
732
R.METER
148
39
PEEL PLY, PS, 85G/M2 125CM
40
PERFORATED FILM W=1450 MM
41
PERFORATED FILM ELA20P1, W=100 MM
42
PLASTIC SPIRAL Ø12 MM
43
TACKY TAPE, A970-005
44
45
INLET PROFILE PE Ø17 4.0 M
VACFILM BAGGING FILM 2000 MM LFT
46
VACUUM BAGGING FILM 3050
47
48
49
50
51
FIXATION NEEDLE FOR INLET PROFILE
Ø600 PLASTIC COVER,NORDISK WAVIN 0531610
ADHESIVE ARALDITE 2021 400 ML
GREY FILLER BAG (521 UV) 600 ML
GREY SIKAFLEX FILLER, TYPE 521 UV 300 ML
52
INLET PROFILE PP 4M
BALSA WOOD, GS COATED, 150 KGS/CU.MT, DIFFERENT
THICKNESSES
53 BALSA, GS, COATED, 150KG/M3, 15.9 MM
54
BALSA, GS, COATED, 150KG/M3, 19.1 MM
55
BALSA, GS, COATED, 150KG/M3, 12.7 MM
56
BALSA, GS, COATED, 150KG/M3, 25.4 MM
57
BALSA, GS, COATED, 150KG/M3, 19.1-25.4 MM
58
BALSA, GS, COATED, 150KG/M3, 15.9-19.1MM
59
BALSA, GS, COATED, 150KG/M3, 12.7-15.9 MM
60
BALSA, GS, COATED, 150KG/M3, 6.4-12.7 MM
61
BALSA, GS, COATED, 150KG/M3, 6.4 MM
528
R.METER
660
SQ.METE
R
345
METER
816
METER
1291.95
METER
84 NOS
210
R.METER
366
R.METER
690 NOS
3 NOS
3 NOS
21 NOS
45 NOS
360 NOS
150.03
SQ.METE
R
49.56
SQ.METE
R
9.03
SQ.METE
R
133.11
SQ.METE
R
4.8
SQ.METE
R
2.82
SQ.METE
R
2.07
SQ.METE
R
1.68
SQ.METE
R
138.3
SQ.METE
R
149
NET TO
NET
BASIS
96.6
METER
162 NOS
METAL PARTS
62
50 MM² CABLE ACCORDING TO DIN 46438
63
COMPLETE BUSHING FOR LM 23.3 (VAC.)
64
65
66
67
68
COMPLETE FLANGE FOR LM 37.3 P
LIGHTNING CONDUCTOR LM 37.3 P
COMPLETE TRANSITION TERMINAL
COVER FITTING WITH M12 BOLT
STAY BOLT M30 X 475
3 NOS
3 NOS
9 NOS
24 NOS
162 NOS
69
FIBERLINE PULTRUSIONS
FIBERLINE TRIANGLES F. BUSHING
324 NOS
70
71
PULTRUSION LM 37.3 P
PULTRUSION SMALL LM 37.3 P
156 NOS
12 NOS
72
73
74
75
76
PLASTIC ITEMS
CONNECTING TUBE FOR INLET GATE
HEAT SHRINK TUBING
SHRINKFLEX HDT A 38-12 L=250MM
WEIGHING CHAMBER NET
STAY BOLTS FOR WEB LM 34.0P
77
GUMMIPAKNING FORMPRESSET I NBR
36 NOS
6 METER
3 NOS
12 NOS
3 SETS
3 NOS
Case No.:53/26/87ALC1/2007
Party Name:L M GLASFIBER Meet No/Date:40/87(INDIA) PVT LTD
ALC1/2007
13.02.2008
HQ File
:01/87/050/00392/AM08/
RLA File
:07/24/040/00439/AM08/
Status:Approved
Lic.No/Date:0710053574 Defer Date:
27.09.2007
Application: Request is for adhoc norms for following:
Sl.No.
221 1
Sl.No.
1
2
3
EXPORT ITEM
63/0- FRP ROTOR BLADE LM
37.3P2
IMPORT ITEM
Qty
UOM
24.000
Number
65104204.80
Total
65,104,204.80
Qty
FOB (Rs.)
UOM
GELCOAT UP TYPE A SPRAY RAL
3840.000 K.G
7035. (ITEM CODE:000507)
COMBI 600 (300/300,50/50) STITCHED
165.840 K.G
95 CM. (ITEM CODE: 002307)
ADHESIVE VE TYPE A GT60 . (ITEM
9600.000 K.G
CIF (Rs.)
580245.12
FOB
(Currency)
1179424.00
EURO
1,179,424.00
CIF
(Currency)
14152.32
US$
27286.63
665.53 US$
2901225.60
70761.60
150
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
CODE: 002807)
PEROXIDE UP CAT AA 25/30 KG.
(ITEM CODE:005307)
PEROXIDE VE CAT VV 25/30 KG.
(ITEM CODE:007107)
COMBI 900 (600/300, 50/50) STITCHED
125 CM. (ITEM CODE:010607)
GELCOAT FILLER UP TYPE A RAL
7035. (ITEM CODE: 013107)
GELCOAT UP TYPE A BRUSH RAL
7035. (ITEM CODE:018607)
BIAXIAL 450 (PLUS OR MINUS 45
DEGREES), 125 CM. (ITEM CODE:
019207)
POLYESTER HAND LAY-UP GT80.
(ITEM CODE: 021207)
COMBI 1250 40 CM. (ITEM CODE:
024907)
PEEL PLY PS 85G/M2 12 CM. (ITEM
CODE: 026407)
BALSA GS COATED 150KG/M3 15.9
MM. (ITEM CODE: 026607)
WOVEN ROVING 450 (50/50), 20CM.
(ITEM CODE: 029607)
POLYESTER VARTM TYPE A GT95.
(ITEM CODE: 029907)
DIRECT ROVING, SPUN, 4000TEX .
(ITEM CODE: 030007)
COMBI 900 (600/300, PLUS OR MINUS
45 DEGREES),STITCHED, 125CM.
(ITEM CODE: 031407)
BALSA GS COATED 150KG/M3 19.1
MM. (ITEM CODE:032907)
PEEL PLY PS 85G/M2 20 CM. (ITEM
CODE: 035307)
COMBI 600 (300/300,50/50) STITCHED
21 CM. (ITEM CODE:035607)
PEEL PLY PS 85G/M2 125 CM. (ITEM
CODE: 037807)
BALSA GS COATED 150KG/M3 12.7
MM. (ITEM CODE: 045707)
BALSA GS COATED 150KG/M3 25.4
MM. (ITEM CODE: 050907)
COMBI 1250 20 CM. (ITEM CODE:
US$
277.920
K.G
35462.65
864.94 US$
212.400
K.G
47276.16
1153.08 US$
1284.000 K.G
146592.48
3575.43 US$
168.000
K.G
37071.22
904.18 US$
492.000
K.G
60183.16
1467.88 US$
9156.000 K.G
1269326.49
30959.18
US$
2040.000 K.G
192781.84
4702.00 US$
6277.200 K.G
623312.78
15202.75
US$
3432.000 Meter
24694.96
602.32 US$
450.580
Sq. meter
529217.28
12907.74
US$
192.000
K.G
41353.98
1008.63 US$
7656.000 K.G
730844.06
17825.46
US$
285.120
59495.85
1451.12 US$
1678.080 K.G
243907.42
5948.96 US$
1026.000 Sq. meter
1072935.40
26169.16
US$
3720.000 Meter
58887.97
1436.29 US$
132.000
25074.88
611.58 US$
1800.000 Meter
154559.34
3769.74 US$
721.920
Sq. meter
713388.35
523.200
Sq. meter
823462.23
K.G
K.G
1440.000 K.G
142988.98
17399.72
US$
20084.44
US$
3487.54 US$
151
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
058307)
FIBERLINE TRIANGLES F. BUSHING.
(ITEM CODE: 064108)
BALSA GS COATED 150KG/M3 19.125.4 MM. (ITEM CODE: 064207)
BALSA GS COATED 150KG/M3 12.715.9 MM. (ITEM CODE: 064407)
BALSA GS COATED 150KG/M3 12.719.1 MM. (ITEM CODE: 065207)
COMBI 600 (300/300,50/50) POWDER
95 CM. (ITEM CODE: 066607)
COMBI 1250 80.5 CM. (ITEM CODE:
075207)
COMBI 1250 121 CM. (ITEM CODE:
075307)
PVC-FOAM 80KG/M3, 60 MM. (ITEM
CODE: 086107)
COMBI 900 (600/300,50/50) STITCHED
15 CM. (ITEM CODE: 086307)
CSM 100 POWDER 125 CM. (ITEM
CODE: 088707)
PEROXIDE UP CAT FF VR 25/30 KG.
(ITEM CODE: 089407)
BALSA GS COATED 150KG/M3 9.5-12.7
MM. (ITEM CODE: 089907)
PERFORATED FILM W=1450 MM.
(ITEM CODE: 092207)
POLYESTER VARTM TYPE B GT150.
(ITEM CODE: 094007)
PERFORATED RELEASE FILM ELA
20P1 W=100 MM. (ITEM CODE:
095107)
GLASS ROLLE 0.09 X 150 METER.
(ITEM CODE: 128606)
BALSA GS COATED 150KG/M3 9.5 MM.
(ITEM CODE: 291117)
50 MM SQUARE CABLE ACCORDING
TO DIN 46438. (ITEMA CODE: 302001)
TACKY TAPE, A970-005 15 METER.
(ITEM CODE: 307201)
BIAXIAL 806 (PLUS OR MINUS 45
DEGREES), 125CM. (ITEM CODE:
315601)
VACUUM BAG 2000 MM LFT. (ITEM
2592.000 Number
322036.04
7854.54 US$
18.480
Sq. meter
33961.26
828.32 US$
21.120
Sq. meter
29998.67
731.67 US$
27.120
Sq. meter
42840.16
1044.88 US$
162.720
K.G
26773.48
653.01 US$
91664.07
US$
39913.69
US$
37848.000 K.G
3758226.92
16480.300 K.G
1636461.17
6.240
Sq. meter
28104.36
685.47 US$
528.000
K.G
78010.73
1902.70 US$
746.400
K.G
152886.53
3728.94 US$
609.600
K.G
133930.70
3266.60 US$
20.400
Sq. meter
29152.14
711.03 US$
5760.000 Sq. meter
82892.16
2021.76 US$
40800.000 K.G
3894780.24
94994.64
US$
3120.000 Meter
5986.66
146.02 US$
19.920
Coil/Roll
34218.69
834.60 US$
269.280
Sq. meter
188593.48
4599.84 US$
828.000
Meter
231562.70
5647.87 US$
17634.000 Meter
152262.54
3713.72 US$
13209.100 K.G
1381338.44
33691.18
US$
2208.000 Meter
508405.25
12400.13
152
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
CODE: 338501)
BALSA GS COATED 150KG/M3 6.4 MM.
(ITEM CODE: 363417)
BUSHING COMPLETE M30. (ITEM
CODE: 383501)
VACUUM BAG 3000 MM LFT. (ITEM
CODE: 410301)
PVC-FOAM 80KG/M3 40 MM. (ITEM
CODE: 414117)
COMPLETE FLANGE LM 37.3 P. (ITEM
CODE: 416401)
PULTRUSION LM 37.3 P. (ITEM CODE:
428001)
PULTRUSION SMALL LM 37.3P. (ITEM
CODE: 428101)
COMPLETE TERMINAL. (ITEM CODE:
446801)
TAPE, ZIG-ZAG 0.5 X 12MM 60
DEGREE. (ITEM CODE: 454201)
PLASTIC COVER DIA 745 X DIA 530.
(ITEM CODE: 456901)
INFUSION MEDIA 4000 MM. (ITEM
CODE: 463216)
25-40 MM GREY SHAFT NET 1A FOR
DIA 30 BOLTS. (ITEM CODE: 464701)
PVC-FOAM H100 40 MM NO. TISSUE.
(ITEM CODE: 480317)
PUR-FLEX HD 2250 ISOCY 500 KG,
BIG BAGS. (ITEM CODE: 500601)
WEIGHING CHAMBER NET. (ITEM
CODE: 505201)
RECEPTOR L=40 MM. (ITEM CODE:
507401)
SPACER SET FOR ASSEMBLY WEBS
LM 37.3 P. (ITEM CODE: 523901)
STAY BOLT M30 X 555 10.9 DM9A
ACCIONA WP. (ITEM CODE: 544801)
TIP END LIGHTNING RECEPTOR.
(ITEM CODE: 552201)
LIGHTNING CONDUCTOR KIT TIP
END LM 37.3. (ITEM CODE: 552301)
RUBBER GASKET, COMPRESSION
MOULDED. (ITEM CODE: 571527)
974.640
Sq. meter
589093.86
US$
14368.14
US$
23973.02
US$
1296.000 Number
982893.79
2400.000 Meter
206079.12
5026.32 US$
10.080
Sq. meter
31023.77
756.68 US$
24.000
Number
1228024.32
1248.000 Number
1641541.08
96.000
Number
1703.89
41.56 US$
48.000
Number
66497.93
1621.90 US$
384.000
Meter
55261.44
1347.84 US$
24.000
Number
95187.73
2321.65 US$
3072.000 Meter
860604.83
20990.36
US$
264.000
Meter
2532.82
61.78 US$
99.840
Sq. meter
467917.03
11412.61
US$
556.800
K.G
123131.71
3003.21 US$
96.000
Number
233617.74
5697.99 US$
48.000
Number
74142.43
1808.35 US$
24.000
Set
425973.60
10389.60
US$
1296.000 Number
621.69
15.16 US$
24.000
Number
79438.32
1937.52 US$
24.000
Number
342091.34
8343.69 US$
24.000
Number
24913.70
607.65 US$
29951.81
US$
40037.59
US$
153
67
INLET PROFILE PP 4M. (ITEM CODE:
4368.000 Number
709127)
Total
11243.23
US$
31,287,261.80 763,103.93
460972.51
Decision: With D/o C&PC OM No. 46011/211/2005-PC.II dated 31.01.2007, following adhoc
norms are approved:
EXPORT
ITEM
FRP
ROTOR
BLADES
LM 37.3
P2
(Weight
of one set
= 16770
KGS +/3%)
QTY
IMPORT ITEM
1 Set
(consisting PVC FOAM
of 3 Nos.
1
PVC-FOAM 80KG/M3 60 MM
of Blades)
2
PVC-FOAM H100 40MM
3
PVC-FOAM 80KG/M3 40MM
GLASS FIBER, ROVINGS / COMBI MAT /
CONTINUOUS FILAMENT / BIAXIAL
4
COMBI 600 (300/300,50/50) STITCHED 95 CM
5
COMBI 900 (600/300, 50/50) STITCHED 125 CM
6
BIAXIAL 450 (±45°) 125 CM
7
COMBI 1250, 40 CM
8
9
10
WOVEN ROVING 450 (50/50), 20CM
DIRECT ROVING SPUN 4000 TEX
COMBI 900 (600/300,±45°),STITCHED 125CM
11
12
13
14
15
COMBI 600 (300/300,50/50) STITCHED 21 CM
COMBI 1250, 20CM
COMBI 600 (300/300,50/50) POWDER 95 CM
COMBI 1250, 80.5 CM
COMBI 1250, 120 CM
16
17
18
COMBI 900 (600/300,50/50) STITCHED 15 CM
CSM 100 POWDER 125 CM
BIAXIAL 806 (±45°) 125 CM
19
GLASS ROLLE 0.09X150 METER
UNSATURATED POLYESTERS, GEL COATS, VINYL
EASTER ADHESIVES
20 GELCOAT FILLER UP TYPE A RAL 7035
21 GELCOAT UP TYPE A BRUSH RAL 7035
QTY
0.78
SQMT
12.48
SQMT
1.26
SQMT
20.73 KG
160.5 KG
1144.5
KG
784.65
KG
24 KG
35.64 KG
209.76
KG
16.5 KG
180 KG
20.34 KG
4731 KG
2060.04
KG
66 KG
93.3 KG
1,651.14
KG
2.49
ROLL
21 KG
61.5 KG
154
22
23
24
25
GELCOAT UP TYPE A SPRAY RAL 7035
ADHESIVE VE TYPE A GT60
POLYESTER HAND LAY-UP GT80
POLYESTER VARTM TYPE A GT95
26
POLYESTER VARTM TYPE B GT150
480 KG
1200 KG
255 KG
957.00
KG
5,100.00
KG
PEROXIDES
27 PEROXIDE UP CAT AA 25/30 KG
28 PEROXIDE VE CAT VV 25/30 KG
29 PEROXIDE UP CAT FF VR 25/30 KG
34.74 KG
26.55 KG
76.2 KG
ADHESIVES, NORPOL, PURFLEX
30 PUR-FLEX HD 2250 ISOCYA
69.6 KG
PROCESSING CONSUMABLES
31 PEEL PLY PS 85G/M2 12 CM
32
PEEL PLY PS 85G/M2 20 CM
33
34
PEEL PLY PS 85G/M2 125 CM
PERFORATED FILM W=1450 MM
35
36
PERFORATED FILM ELA20P1, W=100 MM
TACKY TAPE, A970-005 15 METER
37
VACUUM BAG 3000 MM LFT
38
39
PLASTIC COVER 745 X \330530
INFUSION MEDIA 4000 MM
40
41
INLET PROFILE PP 4M
VACUUM BAG 2000 MM LFT
42
TAPE, ZIG-ZAG 0.5X12MM 60 DEGREE
BALSA WOOD IN DIFFERENT THICKNESSES
43 BALSA GS COATED 150KG/M3 15.9 MM
44
BALSA GS COATED 150KG/M3 19.1 MM
45
BALSA GS COATED 150KG/M3 12.7 MM
46
BALSA GS COATED 150KG/M3 25.4 MM
429
METER
465
R.MTR
1.5 NOS
720
SQMT
390 MTR
2204.25
MTR
300
R.MTR
3 NOS
270
R.MTR
546 NOS
276
R.MTR
48 MTR
56.31
SQMT
128.25
SQMT
90.24
SQMT
65.4
SQMT
155
47
BALSA GS COATED 150KG/M3 19.1-25.4 MM
48
BALSA GS COATED 150KG/M3 12.7-15.9 MM
49
BALSA GS COATED 150K/M3 12.7-19.1 MM
50
BALSA GS COATED 150KG/M3 9.5-12.7 MM
51
BALSA GS COATED 150KG/M3 9.5 MM
52
BALSA GS COATED 150KG/M3 6.4 MM
METAL PARTS
53
54
55
56
57
58
59
60
BUSHING COMPLETE M30
COMPLETE TRANSITION TERMINAL
COMPLETE FLANGE LM 37.3 P
RECEPTOR L=40 MM
TIP END LIGHTNING RECEPTOR
LIGHTNING CONDUCTOR KIT TIP END LM 37.3
STAY BOLTS M30 X 555 10.9 DM9A ACCIONA WP
50 MM² CABLE ACCORDING TO DIN 46438
FIBERLINE PULTRUSIONS
61 PULTRUSION LM 37.3P
62 PULTRUSION SMALL LM 37.3P
63 FIBERLINE TRIANGLES F. BUSHING
156 NOS
12 NOS
324 NOS
PLASTIC ITEMS
64 WEIGHING CHAMBER NET
65 25-40 MM GREY SHAFT NET 1A FOR \33030
BOLTS
66 RUBBER GASKET, COMPRESSION MOULDED
67 SPACER SET FOR ASSEMBLY MAIN WEBS LM
37.3 P
Case No.:55/26/87-ALC1/2007 Party Name:GUJARAT
RAFFIA INDUSTRIES LTD
HQ File
223 :01/87/050/00394/AM08/
RLA File
:08/24/040/00157/AM08/
2.31
SQMT
2.64
SQMT
3.39
SQMT
2.55
SQMT
33.66
SQMT
121.83
SQMT
NET TO
NET
BASIS
162 NOS
6 NOS
3 NOS
6 NOS
3 NOS
3 NOS
162 NOS
103.5
MTR
12 NOS
33 MTR
3 NOS
3 SETS
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
Lic.No/Date:0810067445
27.09.2007
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
156
1.
Sl.No.
1.
2.
3.
4.
5.
6.
7.
Laminated Plastic Sheetings Net Eyelets: 7050000 Nos.
IMPORT ITEM
Polyethylene Unlaminated Fabric 40-130 GSM
LDPE/LLDPE Granuels
Titanium Dioxide
Colour Pigment
Wax
U.V. Stabilizer
Aluminium Eyelets (Gromets)
300000.000 kg
Qty
198000.000 kg
122100.000 kg
5940.000 kg
924.000 kg
1518.000 kg
1518.000 kg
7120500 Number
Decision: With D/o C&PC OM No. 46011/153/2006-PC.II dated 03.01.2008, D/o C&PC
recommended the following norms:
EXPORT ITEM
QTY
IMPORT ITEM
Laminated Plastic Sheetings 1 MT 1. Polyethylene Unlaminated
(Laminated Tarpulins based
Woven Fabric (40-130 gsm)
on plastic woven fabric, Net
2. LDPE Granules
Eyelets - 7050000 Nos.)
3. Titanium Dioxide
4. Colour Pigment
5. Wax
6. UV Stabilizer
7. Aluminium Eyelets (Gromets)
Case No.:4/27/87ALC1/2007
Party Name:PROPACK
Meet No/Date:40/87INDUSTRIES(PROP.
ALC1/2007
KUNAL PLASTICS PVT. 13.02.2008
LTD)
HQ File
:01/87/050/00405/AM08/
RLA File
:03/95/040/00504/AM08/
QTY
0.6600 MT
0.4070 MT
0.0198 MT
0.0030 MT
0.0050 MT
0.0050 MT
Net + 1%
Wastage
Status:Approved
Lic.No/Date:0310444462 Defer Date:
27.09.2007
Application: Request is for adhoc norms for following:
Sl.No.
224
1
EXPORT ITEM
63/0POLYETHYLENE
WHITE OPAQUE
PRINTED BAGS (NET
WT OF LDPE 42000
KGS LLDPE 13200
KGS & WHITE
MASTERBATCH 4800
KGS)
Qty
60000.000
UOM
K.G
FOB (Rs.)
5576000.00
Total 5,576,000.00
FOB
(Currency)
136000.00
US$
136,000.00
157
Sl.No.
IMPORT ITEM
1
LDPE GRANULES
2
LLDPE GRANULES
WHITE
3
MASTERBATCH
Qty
UOM CIF (Rs.) CIF (Currency)
44100.000 K.G
3254580.00 79380.00 US$
13860.000 K.G
1022868.00 24948.00 US$
5040.000 K.G
Total
475272.00
11592.00 US$
4,752,720.00 115,920.00
Decision: Norms as per existing SION entry at Sl. No. H557 published through
Public Notice No. 88 (RE: 2007)/2004-2009 dated 05.12.2007, are approved.
Case No.:56/26/87ALC1/2007
Party Name:HALDIA
PETROCHEMICALS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00395/AM08/
RLA File
:02/24/040/00185/AM08/
Lic.No/Date:0210104649 Defer Date:
28.09.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No. EXPORT ITEM
Qty
1
63/0- Benzene
21000.000
UOM
FOB (Rs.)
FOB (Currency)
M.T
800679600.00
19992000.00 US$
Total 800,679,600.00
19,992,000.00
225 Sl.No. IMPORT ITEM
Qty
UOM
CIF (Rs.)
CIF (Currency)
1
Naphtha
25074.000 M.T
752220000.00 18782022.47 US$
Total
752,220,000.00 18,782,022.47
Decision: With D/o C&PC OM No. 46011/244/2002-PC.II dated 08.06.2004, following adhoc
norms are approved:
EXPORT ITEM
Benzene (from Olefin Complex)
QTY
1 MT
IMPORT ITEM
Naphtha
Case No.:57/26/87-ALC1/2007 Party Name:SHAILY
ENGINEERING PLASTIC
LTD.,
226 HQ File
:01/87/050/00396/AM08/
RLA File
:34/24/040/00096/AM08/
Application: Request is for adhoc norms for following:
Meet No/Date:40/87ALC1/2007
13.02.2008
QTY
1.194 MT
Status:Approved
Lic.No/Date:3410019730 Defer Date:
28.09.2007
158
Sl.No.
EXPORT ITEM
63/0- Articles Made Of
Polyphenylene Oxide
1
Sl.No.
IMPORT ITEM
FOB
(Currency)
49815.29
9523.800 K.G 2020010.00
US$
Total 2,020,010.00
49,815.29
CIF
Qty
UOM
CIF (Rs.)
(Currency)
Qty
Glass Reinforced Modified
Polyphenylene Oxide (PPO)
Compound
1
UOM
FOB (Rs.)
10000.000 K.G
2000000.00
Total
49321.82
US$
2,000,000.00 49,321.82
Decision: With D/o C&PC OM No. 46011/105/2004-PC.II dated 21.02.2006, following adhoc
norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Articles
Made
of 1 kg 20% Glassfiber Reinforced
Polyphenylene Oxide
Modified Polyphenylene Oxide
QTY
1.05 kg/kg content
in export product
Case No.:59/26/87ALC1/2007
Party Name:PENNWALT
AGRU PLASTICS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00398/AM08/
RLA File
:34/24/040/00081/AM08/
Lic.No/Date:3410019732 Defer Date:
28.09.2007
Status:Approved
Application: Request is for adhoc norms for following:
FOB
(Currency)
63/0- ARTICLES MADE OF
339648.00
1
125.000
M.T
14265242.00
M.D.P.E SUCH AS PIPES
US$
228
Total 14,265,242.00
339,648.00
Sl.No.
IMPORT ITEM
Qty UOM CIF (Rs.)
CIF (Currency)
1
M.D.P.E GRANULES
131.250 M.T 13585945.00 323474.00 US$
Total 13,585,945.00 323,474.00
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
Decision: With D/o C&PC OM No. 46011/135/2007-PC.II dated 03.01.2008, following
adhoc norms are approved:
EXPORT ITEM
QTY
Articles made of MDPE 1 kg
IMPORT ITEM
MDPE Granules
QTY
1.05 kg/kg content in
159
such as Pipes
export product
Case No.:1/28/87ALC1/2007
Party Name: ZENITH
INDUSTRIAL RUBBER
PRODUCTS PVT. LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00429/AM08/
RLA File
:03/95/040/00715/AM08/
Lic.No/Date:0310446774 Defer Date:
17.10.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
62/0- RUBBER
COMPOUNDED
SHEETS OF NITRILE
RUBBER
1
UOM
200000.000 K.G
FOB (Rs.)
14850000.00
Total 14,850,000.00
Sl.No.
233
IMPORT ITEM
Qty
UOM
CIF (Rs.)
FOB
(Currency)
330000.00
US$
330,000.00
CIF
(Currency)
152000.00
US$
99900.00
US$
12320.00
US$
1540.00
US$
1
SYNTHETIC RUBBER
NITRILE
76000.000 K.G
6840000.00
2
NATURAL RUBBER
54000.000 K.G
4495500.00
3
ZINC OXIDE
4400.000 K.G
554400.00
4
STEARIC ACID
2200.000 K.G
69300.00
5000.000 K.G
450000.00
10000.00
US$
2400.000 K.G
129600.00
2880.00
US$
4800.000 K.G
378000.00
5
6
7
RUBBER CHEMICALS:
a) ANTIOXIDANT /
ACCELARATOR
b) PEPTIZER
PROCESSING ADDITIVES
STRUCTOL A-222/
ULTRALOOP - 220
D. O. P.
Total
8400.00
US$
12,916,800.00 287,040.00
Decision: With DIPP letter dated 13.02.2008, following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
QTY
160
Rubber
Compounded 100
Sheets of Nitrile Rubber kg
(containing min. Nitrile
Rubber 34.5% and Natural
Rubber 24.5%)
Synthetic Rubber Nitrile
Natural Rubber
Zinc Oxide
Stearic Acid
Rubber Chemicals:
A) Antioxidant / Accelarator
B) Peptizer
6. Processing Additives
STRUCTOL A-222/
ULTRALOOP - 220
7. DOP
Note: Value Cap on Rubber Chemicals upto 7% of FOB value.
Case No.:2/28/87ALC1/2007
1.
2.
3.
4.
5.
Party Name:DSM
ENGINEERING
PLASTICS (INDIA)
PVT. LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
38.00 kg
27.00 kg
2.20 kg
1.10 kg
2.50 kg
1.20 kg
2.40 kg
Status:Approved
HQ File
RLA File
Lic.No/Date:311003118 Defer Date:
:01/87/050/00430/AM0 :31/24/040/00223/AM08/ 3
8/
17.10.2007
Application: Request is for adhoc norms for following:
Sl.No
.
1
234
EXPORT ITEM
63/0- AKULON N24
G6 GREY
30% GLASS FIBER
REINFORCED PA6
(NYLON 6
COMPOUND)
Qty
20000.000
UOM
K.G
FOB (Rs.)
59000.00
US$
2333450.00
Total 2,333,450.00
Sl.No
.
1
2
3
IMPORT ITEM
NYLON 6 CHIPS/
GRANULES
BASE POLYMER
GLASS FIBER (CHOPPED
STRAND)
REINFORCING AGENT
BLACK MASTERBATCH PE
48/93
RELEVANT COLORANT
Qty
UOM CIF (Rs.)
FOB
(Currency)
59,000.00
CIF (Currency)
14050.00
K.G
0
1434891.38 35827.50 US$
6180.000 K.G
272259.90
6798.00 US$
310.000
45937.35
1147.00 US$
K.G
161
4
CALCIUM STEARATE
MOULD RELEASE AGENT
62.000
K.G
3724.65
93.00 US$
Total
1,756,813.2
43,865.50
8
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Akulon –K224 G6/N 24 G6
1 kg 1. Polyamide 6/Nylon 6
30% Glass Fiber Reinforced,
Chips/Granules
PA6 (Nylon 6) Compound
2. Glass Fiber
3. Relevant Colourant
(Pigments/Masterbatch)
4. Mould Release Agent (Calcium
Stearate)
QTY
0.70250 kg
0.30900 kg
0.01550 kg
0.00310 kg
Case No.:3/28/87-ALC1/2007 Party Name:DSM
ENGINEERING PLASTICS
(INDIA) PVT. LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00431/AM08/
Lic.No/Date:3110031186 Defer Date:
17.10.2007
RLA File
:31/24/040/00224/AM08/
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
235
1
Sl.No.
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- AKULON K222 KGV4
BLACK
20% GLASS FIBER
REINFORCED FLAME
30221.600 K.G 4079928.15
RETARDANT PA 6 (NYLON 6)
COMPOUND IN BLACK
COLOUR
Total 4,079,928.15
IMPORT ITEM
Qty
UOM
1
POLYAMIDE 6/NYLON 6 CHIPS /
GRANULES
20245.800 K.G
2
GLASS FIBER
6225.670 K.G
3
RELEVANT COLOURANT
(PIGMENTS/MASTERBATCH)
311.280
K.G
FOB
(Currency)
103158.74
US$
103,158.74
CIF
CIF (Rs.)
(Currency)
51626.98
2067660.37
US$
6848.23
274271.81
US$
1151.75
46127.53
US$
162
4
5
FLAME RETARDANT (NON
HALOGANATED) MELAMINE
CYNURATE
MOULD RELEASE AGENT
(CALCIUM STEARATE )
3735.400 K.G
231884.35
5789.87
US$
610.120
K.G
36652.69
915.17 US$
Total
2,656,596.75 66,332.00
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007, following adhoc
norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
Akulon – K222 KGV4
1 kg
1. Polyamide 6/Nylon 6
20% Glass Fiber Reinforced,
Chips/Granules
Flame Retardant PA6 (Nylon 6)
2. Glass Fiber
Compound
3. Relevant Colourant
(Pigments/Masterbatch)
4. Flame Retardant (Non
Haloganated) Melamine Cynurate
5. Mould Release Agent (Calcium
Stearate)
QTY
0.66990 kg
0.20600 kg
0.01030 kg
0.12360 kg
0.02020 kg
Case No.:3/29/87ALC1/2007
Party Name:BANKIM
PLAST PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00439/AM08/
RLA File
:03/94/040/00725/AM08/
Lic.No/Date:0310447033 Defer Date:
18.10.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
236
1
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- White Master
Batches (106)
Net Content of 1)
Titanium Dioxide Rutile
coated =787500 kgs 2)
LLDPE Injection
1300000.000 K.G 100259250.00
moulding Exxon =
328125 kgs. 3) Barium
Sulphate Coated =
198786.407 kgs. 4)
Fumed Silica = 1300
kgs.
Total 100,259,250.00
FOB
(Currency)
2535000.00
US$
2,535,000.00
163
Sl.No.
1
2
3
4
IMPORT ITEM
TITANIUM DIOXIDE
RUTILE COATED
LLDPE Injection
Moulding Exxon
BARIUM SULPHATE
COATED
FUMED SILICA
Qty
UOM
CIF (Rs.)
CIF (Currency)
819000.000 K.G
63961852.50 1597050.00 US$
341250.000 K.G
21183946.88 528937.50 US$
204750.000 K.G
5002144.88
1300.000
124897.50 US$
K.G 286357.50
7150.00 US$
Total 90,434,301.76 2,258,035.00
Decision: With D/o C&PC OM No. 46011/85/2007-PC.II dated 03.10.2007, following
adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
White Master Batch – 106 1 kg
1. Titanium Dioxide
(containing 60 +/- 1%
2. LLDPE Granules
Titanium Dioxide, 25 +/- 1%
3. Barium Sulphate
LLDPE and 15 +/- 1% Barium
Coated
Sulphate Coated)
4. Fumed Silica
QTY
0.6120 kg
0.2550 kg
0.1520 kg
0.0010 kg
Case No.:7/28/87-ALC1/2007 Party Name:ASHIRVAD
PIPES PVT LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00435/AM08/
Lic.No/Date:0710053975
22.10.2007
Defer Date:
RLA File
:07/24/040/00527/AM08/
Application: Request is for adhoc norms for following:
Sl.No.
239
1
EXPORT ITEM
63/0- UPVC COLOUMN PIPES OF
DIFFERENT TYPES AND SIZES - NET
CONTENT OF PVC RESIN 54.279 MT.
Sl.No.
IMPORT ITEM
1
PVC RESIN.
Qty
54.279
Qty
57.554
UOM FOB (Rs.)
FOB
(Currency)
M.T
119636.42
US$
4791438.62
Total 4,791,438.62 119,636.42
UOM
CIF (Rs.)
CIF (Currency)
M.T 2391261.34
59706.90 US$
Total 2,391,261.34
59,706.90
Decision: With D/o C&PC OM No. 46011/68/2007-PC.II dated 28.09.2007, following adhoc
norms are approved:
164
EXPORT ITEM
UPVC Column Pipes of 75mm OD
(Heavy Duty for Submersible
Pumps/Bore Well)
Case No.:6/29/87ALC1/2007
QTY
1 kg
Party Name:PROPACK
INDUSTRIES(PROP.
KUNAL PLASTICS PVT.
LTD)
HQ File
RLA File
:01/87/050/00444/AM08/ :03/95/040/00704/AM08/
IMPORT ITEM
PVC Resin
Meet No/Date:40/87ALC1/2007
13.02.2008
QTY
0.943 kg
Status:Approved
Lic.No/Date:0310447640 Defer Date:
24.10.2007
Application: Request is for adhoc norms for following:
Sl.No.
1
243
EXPORT ITEM
Qty
UOM
63/0POLYETHYLENE
WHITE OPAQUE
PRINTED BAGS (NET
WT OF LDPE 52500
KGS , LLDPE 16500
KGS & WHITE
MASTERBATCH 6000 75000.000
KGS)
(The grades of LLDPE
& LDPE granules to be
film grade and White
masterbatch to contain
70% TiO2 and
30%LDPE )
Sl.No.
IMPORT ITEM
1
LDPE GRANULES
2
LLDPE GRANULES
WHITE
3
MASTERBATCH
K.G
FOB (Rs.)
6765000.00
FOB
(Currency)
165000.00
US$
Total 6,765,000.00 165,000.00
Qty
UOM CIF (Rs.) CIF (Currency)
55125.000 K.G
3955218.75 96468.75 US$
17325.000 K.G
1207552.50 29452.50 US$
6300.000 K.G
Total
594090.00
14490.00 US$
5,756,861.25 140,411.25
Decision: Norms as per existing SION entry at Sl. No. H557 published through
Public Notice No. 88 (RE: 2007)/2004-2009 dated 05.12.2007, are approved.
165
Case No.:7/29/87-ALC1/2007
Party Name:ESSILOR
MANUFACTURING INDIA
PVT LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00445/AM08/
RLA File
:07/24/040/00530/AM08/
Lic.No/Date:0710054037 Defer Date:
25.10.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
Qty
63/0- PLASTIC OPHTHALMIC
LENSES - SF UNC 72 DIA
UOM
300000.000 Number 6881700.00
Total
Sl.No.
244
FOB (Rs.)
IMPORT ITEM
Qty
6,881,700.00
UOM
CIF (Rs.)
1
CR 39 MONOMER
15375.000 K.G
2834843.00
2
PEROYL IPP 10%
4857.000
2025612.00
3
POLYETHYLENE FOAM SHEET
306000.000 Number 109750.00
Total 4,970,205.00
K.G
FOB
(Currency)
174000.00
US$
174,000.00
CIF
(Currency)
64575.00
US$
46142.00
US$
2500.00 US$
113,217.00
Decision: With D/o C&PC OM No. 46011/95/2004-PC.II dated 29.12.2006, following adhoc
norms are approved:
EXPORT ITEM
Plastic Ophthalmic Lenses
SF Unc 72 Dia
(Weight 60.13 gms/Lens)
247
QTY
IMPORT ITEM
1
1. CR 39 Monomer
No.
2. Peroyl IPP 10%
3. Polyethylene Foam Sheet
QTY
51.25 gm
16.18 gm
Net + 2% Wastage
Case No.:11/29/87ALC1/2007
Party Name:J.D.EXPORTS
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00449/AM08/
RLA File
:03/94/040/00754/AM08/
Lic.No/Date:0310447875
25.10.2007
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
63/0- Articles made of
Polyethylene Terephthalate
Qty
UOM
50600.000 K.G
FOB (Rs.)
9570000.00
FOB
(Currency)
9570000.00
Indian Rupees
166
Glycol Copolyester (PETG);
Pears Handwash bottle; Avg.
Wt.: 46 Gms.
Tech. Spec.: Handwash bottle
237 Ml
Total 9,570,000.00
Sl.No.
1
IMPORT ITEM
Qty
UOM
Polyethylene Terephthalate Glycol
Copolyester (PETG)
53130.000 K.G
Tech. Spec.: Granules; Eastar
Copolyester GN071 Natural
Total
9,570,000.00
CIF
CIF (Rs.)
(Currency)
5568040.00
139201.00
US$
5,568,040.00 139,201.00
Decision: Taking cue from SION, following adhoc norms are approved:
EXPORT ITEM
Articles made of
Polyethylene
Terephthalate Glycol
Copolyester (PETG)
QTY
IMPORT ITEM
1 kg Polyethylene
Terephthalate Glycol
Copolyester (PETG)
QTY
1.05 kg/kg
content in
export product
Case No.:16/29/87-ALC1/2007 Party Name:SWASTIK
POLYMERS
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
HQ File
:01/87/050/00454/AM08/
Lic.No/Date:0510211268
31.10.2007
Defer Date:
RLA File
:05/24/040/00581/AM08/
Application: Request is for adhoc norms for following:
Sl.No.
253
1
Sl.No.
1
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- EVA INJECTION
MOULDING COMPOUND
(EVA COMPOUND)
175.000 M.T 14188562.00
SUPERIOR GRADE EC SERIES
( IN VARIOUS COLOUR)
Total 14,188,562.00
IMPORT ITEM
EVA RESIN (ETHYLENE VINYL
ACETATE )
Qty
UOM
154.000 M.T
FOB
(Currency)
358750.00
US$
358,750.00
CIF
CIF (Rs.)
(Currency)
292600.00
11557700.00
US$
167
2
3
4
STABLIZER
BLOWING AGENT
D.C.P. ( DICUMYL PEROXIDE )
3.850
4.025
2.153
M.T
M.T
M.T
Total
281338.75
349772.00
263634.85
12,452,445.60
7122.50 US$
8855.00 US$
6674.30 US$
315,251.80
Decision: With D/o C&PC OM No. 46011/17/2007-PC.II dated 03.01.2008, following adhoc
norms are approved:
EXPORT ITEM
QTY
EVA Injection Moulding 1 kg
Compound (Superior Grade
EC Series in various colours)
1.
2.
3.
4.
IMPORT ITEM
EVA Resin
Stabilizer
Blowing Agent
Dicumyl Peroxide
QTY
0.8800 kg
0.0220 kg
0.0230 kg
0.0123 kg
Case No.:17/29/87-ALC1/2007 Party Name:SWASTIK
POLYMERS
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00455/AM08/
Lic.No/Date:0510211270 Defer Date:
31.10.2007
RLA File
:05/24/040/00582/AM08/
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
254
Sl.No.
1
2
EXPORT ITEM
Qty
UOM
FOB (Rs.)
63/0- PVC COMPOUND- SHOE
SOLE GRADE
35.000 M.T 2007162.00
GRADE NO. RT - 125
Total 2,007,162.00
IMPORT ITEM
Qty
PVC RESIN
K. VALUE 66-67
DI OCTYL PHATHALATE (D.O.P.)
UOM
FOB
(Currency)
50750.00 US$
50,750.00
CIF
CIF (Rs.)
(Currency)
21.000 M.T
862680.00
21840.00 US$
11.550 M.T
Total
798393.75 20212.50 US$
1,661,073.75 42,052.50
Decision: With D/o C&PC OM No. 46011/17/2007-PC.II dated 03.01.2008, following adhoc
norms are approved:
EXPORT ITEM
QTY
PVC Compound – Shoe Sole 1 kg
Grade
Grade No. RT-125
IMPORT ITEM
1. PVC Resin
2. Dioctyl Phthalate
QTY
0.600 kg
0.330 kg
168
Case No.:19/29/87ALC1/2007
Party Name:MARUTI
TECHNO RUBBER
PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00457/AM08/
RLA File
:05/24/040/00136/AM08/
Lic.No/Date:0510211373 Defer Date:
01.11.2007
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
Sl.No.
1
2
255
3
4
EXPORT ITEM
Qty
63/0- Expansion &
contraction Joint made out
60000.000
of PVC Nitrile Blend
TC Heat Resistant
IMPORT ITEM
PVC Resin
TC suspension Grade Quality
Standard
Nitrile Butadiene Rubber (NBR)
TC Heat Resistant Quality
Standard
Rubber Chemicals &
Accelerators
TC Non Staining Quality
Standard
D.O.P.
Tc Softner Quality Standard
Qty
UOM
K.G
FOB (Rs.)
FOB
(Currency)
84500.00
US$
3506750.00
Total 3,506,750.00
84,500.00
UOM CIF (Rs.)
CIF (Currency)
8400.000 K.G 282200.00
6800.00 US$
19740.000 K.G 1641740.00 39560.00 US$
960.000
K.G 56160.00
18900.000 K.G 66254.70
1208.00 US$
15965.00 US$
Total 2,046,354.70 63,533.00
Decision: With D/o C&PC OM No. 46011/14/2008-PC.II dated 08.02.2008, following adhoc
norms are approved:
EXPORT ITEM
Expansion & Contraction
Joint made out of PVC –
NBR Blend
260 Case No.:18/40/81-
QTY
1 kg
IMPORT ITEM
1. PVC Resin (Suspension Grade)
QTY
0.140 kg
2. Nitrile Butadiene Rubber
(NBR)
3. Di-Octyl Phthalate
4. Rubber Chemicals &
Accelerators
0.329 kg
Party Name:PADMANABH
Meet No/Date:40/87-
0.315 kg
0.016 kg
Status:Approved
169
ALC2/2007
ALLOYS & POLYMERS LTD ALC1/2007
13.02.2008
HQ File
:01/81/050/00456/AM08/
RLA File
:52/80/040/00007/AM08/
Lic.No/Date:5210022528
30.11.2007
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
Qty
61/0- 60% MINERAL FILLED
PPHP COMPOUND GRADE P
1260 XT/C (CONTAINING 40 +/1% PPHP)
UOM
5000.000 K.G
FOB (Rs.)
165750.00
FOB
(Currency)
4250.00 US$
Total 165,750.00
Sl.No.
1
2
IMPORT ITEM
POLYPROPYLENE HOMOPOLYMER
(PPHP) GRANULES
CALCIUM CARBONATE
4,250.00
CIF
Qty
UOM CIF (Rs.)
(Currency)
3180.00
2000.000 K.G
124000.00
US$
2060.000 K.G
6180.00
159.00 US$
Total
130,180.00 3,339.00
Decision: With D/o C&PC OM No. 46011/162/2006-PC.II dated 15.12.2006, following adhoc
norms are approved:
EXPORT ITEM
QTY
60% Mineral Filled PPHP 1 kg
Compound Grade: P 1260
XT/C (containing 40 +/- 1%
PPHP)
IMPORT ITEM
1. Polypropylene Homopolymer
(PPHP) Granules
2. Calcium Carbonate
QTY
0.400 kg
0.412 kg
Name:GARWARE Meet
No/Date:40/87- Status:Approved
Case No.:1/36/87-ALC1/2007 Party
ELASTOMERICS LTD.
ALC1/2007
13.02.2008
HQ
File RLA
File Lic.No/Date:3110031997 Defer Date:
:01/87/050/00549/AM08/
:31/24/040/00306/AM08/
19.12.2007
Application: Request is for adhoc norms for following:
261
Sl.No. EXPORT ITEM
1
62/0UNVULCANIZED
RUBBER
COMPOUND IN
Qty
UOM FOB (Rs.)
FOB
(Currency)
4000000.000
K.G
10445859.87
US$
410000000.00
170
SHEET FORM WITH
VULCANIZING
AGENT
RUBBER
COMPOUND
Total 410,000,000.00
Sl.No. IMPORT ITEM
1
2
3
4
5
6
7
8
Synthetic Rubbers such as Nippol IR 2200 N, SKI
3S,SBR 1502, (Details as per
attached Annexure)
Raw Material
Activators:–Such as Zinc
Oxide, PEG-400, Zinc
Stearate (Details as per
attached Annexure)
Activator
Antioxidant -:such as
Wingstay - L, DNPD Nocrac
White, etc (Details as per
Attached Annexure)
Antioxidants
Accelerator:- such as (Di
Benzothiazole disulphide)
such as Pilcure MBTS,
etc(Details as per Attached
Annexure)
Accelerator
Peptisizers & Lubricants-:
such as Zincolet-T, ActiplastT, Struktol – WB 16,etc,(Details as per
Attached Annexure)
Raw Material
Retarder such as Pilgard PVI
Raw Material
Vulcanising Agent -:such as
DTDM, Vultac TB710,
Vultac 710,etc, (details as
per Attached Annexure)
Vulcanising Agent
Filler - such as Calcium
Qty
UOM
CIF (Rs.)
10,445,859.87
CIF
(Currency)
2800000.000 K.G
371676000.00
9362115.86
US$
108000.000 K.G
0.00
0.00 US$
48000.000
K.G
0.00
0.00 US$
40000.000
K.G
0.00
0.00 US$
4000.000
K.G
0.00
0.00 US$
40000.000
K.G
0.00
0.00 US$
52000.000
K.G
0.00
0.00 US$
200000.000 K.G
0.00
0.00 US$
171
9
10
11
Carbonate, Silica, etc,
(Details as per attached
Annexure)
Filler
Co-Activator - such as
Stearic Acid etc.
52000.000 K.G
Co-Activator
Pigment / Dyes :- such as
Titanium Dioxide Such as
RFC5, Kotiox - 100, etc,
220000.000 K.G
(Details as per attached
Annexure)
Pigments / Dyes
Deodorants such as, Odorex
-V, Odorex OC, Rodo - O,
2280.000
K.G
Stanmask Vanilla, etc.
Raw Material
Total
0.00
0.00 US$
0.00
0.00 US$
0.00
0.00 US$
371,676,000.00 9,362,115.86
Decision: With DIPP letter dated 13.02.2008, following adhoc norms are approved:
EXPORT ITEM
Un-vulcanized Synthetic
Rubber Compound in Sheet
form along with Vulcanizing
Agent
QTY
1000
kg
IMPORT ITEM
1. Synthetic Rubbers such as Nippol IR 2200 N, SKI 3S, SBR
1502, (Details as per attached
application)
2. Activators:–such as Zinc Oxide,
PEG-400, Zinc Stearate (Details
as per attached application)
3. Antioxidant -:such as Wingstay L, DNPD Nocrac White, etc
(Details as per application)
4. Accelerator:- such as (Di
Benzothiazole Disulphide) such
as Pilcure MBTS, etc. (Details as
per application)
5. Peptisizers & Lubricants-: such
as Zincolet-T, Actiplast-T,
Struktol – WB -16,etc,(Details as
per application)
6. Retarder such as Pilgard PVI
7. Vulcanising Agent -:such as
DTDM, Vultac TB710, Vultac
710,etc, (details as per
QTY
700 kg
27 kg
12 kg
10 kg
1 kg
10 kg
13 kg
172
application)
8. Filler - such as Calcium
50 kg
Carbonate, Silica, etc, (Details as
per application)
9. Co-Activator - such as Stearic
13 kg
Acid etc.
10. Pigment/Dyes :- such as
55 kg
Titanium Dioxide such as RFC5,
Kotiox - 100, etc, (Details as per
application)
11. Deodorants such as, Odorex -V,
0.57 kg
Odorex OC, Rodo - O, Stanmask
Vanilla, etc.
Note: 1) In the Import Item at Sl. No. (1) above , the quantity of SBR, EPDM and
Vistlon should not exceed 20% of the total Rubber allowed;
2) Value Cap on Import Items at S. No. (3), (4), (5), and (6) together upto 7% of
FOB value; and of
3) Value Cap on Import Items at S. No. (7), and (9) together upto 7% FOB value;
4) Exporter should account for 2718446 kg of Synthetic Rubber in export
product.
265 Case No.:5/36/87-ALC1/2007 Party Name:DSM
ENGINEERING PLASTICS
(INDIA) PVT. LTD
HQ File
:01/87/050/00553/AM08/
RLA File
:31/24/040/00312/AM08/
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Approved
Lic.No/Date:3110032031
20.12.2007
Defer Date:
Application: Request is for adhoc norms for following:
Sl.No. EXPORT ITEM
1
63/0- ARNITE TO6 202 BLACK
UNFILLED POLYBUTYLENE
TEREPTHALATE (PBT)
COMPOUND
IN BLACK COLOUR
Sl.No. IMPORT ITEM
PBT CHIPS/ GRANULES
1
BASE POLYMER
LOXIOL G-32
2
MOULD RELEASE AGENT
Qty
UOM FOB (Rs.)
FOB
(Currency)
5000.000
K.G
15000.00
US$
Qty
590250.00
Total 590,250.00 15,000.00
UOM CIF (Rs.) CIF (Currency)
5145.650 K.G
391653.43 9828.19 US$
15.450
K.G
1754.70
Total
393,408.13 9,872.22
44.03 US$
173
Decision: With D/o C&PC OM No. 46011/111/2004-PC.II dated 19.02.2007, following adhoc
norms are approved:
EXPORT ITEM
Arnite TO6200/TO6202/TO 8200
Unfilled Polybutene Terepthalate
Compound PBT Compound
QTY
1 kg
IMPORT ITEM
1. PBT Chips/Granules
2. Mould Releasing Agent
(Loxiol)
Case No.:7/36/87ALC1/2007
Party
Name:PADMANABH
ALLOYS & POLYMERS
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00555/AM08/
RLA File
:52/24/040/00024/AM08/
Lic.No/Date:5210022665 Defer Date:
26.12.2007
QTY
1.00000 kg
0.00300 kg
Status:Approved
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
63/0- 60% MINERAL
FILLED PPHP
COMPOUND GRADE P
1260 XT/C
Qty
UOM
21000.000 K.G
FOB (Rs.)
568214.00
FOB
(Currency)
14440.00
US$
Total 568,214.00
267
Sl.No.
1
2
IMPORT ITEM
POLYPROPYLENE
HOMOPOLYMER (PPHP)
GRANULES
CALCIUM CARBONATE
Qty
UOM
14,440.00
CIF
CIF (Rs.)
(Currency)
13069.00
US$
8400.000 K.G
520800.00
8652.000 K.G
Total
25956.00 660.00 US$
546,756.00 13,729.00
Decision: With D/o C&PC OM No. 46011/162/2006-PC.II dated 15.12.2006,
following adhoc norms are approved:
EXPORT ITEM
QTY
IMPORT ITEM
60% Mineral Filled PPHP 1 kg 1. Polypropylene
Compound Grade: P 1260
Homopolymer (PPHP)
XT/C (containing 40 +/- 1%
Granules
PPHP)
2. Calcium Carbonate
QTY
0.400 kg
0.412 kg
174
3.2 Committee, after deliberations, rejected following cases:
3.2.1
Case No. A-551
SHREE PSNA
POLYMER
MADRAS (P) LTD.
Adv. Lic. not issued
HQ F. No.
01/87/162/269/AM08/DES-VII
Status:
Rejected
NC No.: 40/08
Import of Plastic Scrap
Dated:13.02.2008
Application: Request is for permission to import plastic scrap under advance
authorization scheme and adhoc norms for following:
Sl.No.
EXPORT ITEM
Qty
1.
RECYCLLED PLASTIC GRANULE
50 MT
Sl.No.
IMPORT ITEM
1.
PLASTIC FILM CUTS
Qty
50000 KG
Decision: Rejected as the unit is set up after cut off date 19.06.1998, provided in Policy
Circular No. 20/2002-2007 dated 12.03.2003.
175
3.3. Following applications were deferred:
MANUAL CASES
AMIANTIT
HQ F. No.
FIBERGLASS
01/87/050/465/AM08/DES-VII
NC No.: 40/08
Adv. Lic. No.
RLA F. No. 17/24/040/53/AM08
Dated:13.02.2008 1710001748
Dated 03.09.2007
Application: Request is for adhoc norms for following:
Position: Copy of application again to be sent to D/o C&PC.
3.3.1
Case No. A-528
Status:
Deferred
THE ELECTRO
HQ F. No.
Status:
MEDICAL &
01/87/050/18/AM06/DES-VII
Deferred
ALLIED
01/87/050/656/AM07/DES-VII
INDUSTRIES
LTD.
NC No.: 40/08
Adv. Lic. No.
RLA F. No. 02/24/040/5/AM06
Dated:13.02.2008 0210077113
RLA F. No. 02/24/040/207/AM07
Dated 05.04.2005
Adv. Lic. No.
0210094706
Dated 26.10.2006
Application: Request is for acceptance of CA certificate in place of Central Excise data.
3.3.2
Case No. A-533
Decision: Firm should be asked to submit production and consumption data certified
by Chartered Account/Central Excise Authority for consideration of their request.
ESSEN
HQ F. No.
Status:
SPECIALITY
01/87/050/12/AM08/DES-VII
Deferred
FILM PVT. LTD.
NC No.: 40/08
Adv. Lic. No.
RLA F. No.
Dated:13.02.2008 2410018782
24/24/040/00001/AM08
Dated: 09.04.2007
Application: Request is to change description of export item as ‘EVA Placemats
(Embossed/Plain/Printed/Laminated)’ with quantity of import item ‘EVA Resin’ as
1.07 kg/kg of export item as per application of firm instead of ‘EVA Placemats
3.3.3
Case No. A-534
176
(Laminated with Printed BOPP Film)’ with quantity of ‘EVA Resin’ as 1.06 kg/kg
allowed by NC in its Meeting No. 20/08 dated 29.08.2007.
Position: D/L No. 46011/07/2005-PC-II dated 08.01.2008 issued by D/o C&PC,
reminder to be issued by DGFT.
FMI LTD.
HQ F. No.
Status:
LUDHIANA
01/83/162/34/AM08/DES-VII
Deferred
NC No.: 40/08
Adv. Lic. No.
RLA F. No. 30/24/040/66/AM07
Dated:13.02.2008 3010051360
Dated 27.03.2007
Application: Request is for fixation of adhoc norms:
Position: D/L No. 46011/247/2004-PC.II dated 23/27.11.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
3.3.4
Case No. A-538
INTEK TAPES
HQ F. No.
Status:
PVT. LTD.
01/87/050/318/AM08/DES-VIII
Deferred
NC No.: 40/08
Adv. Lic. No.
RLA F. No. 07/24/040/231/AM08
Dated:13.02.2008 0710052229
Dated 28.6.2007
Application: Request is for fixation of adhoc norms:
Position: Information from firm is received by D/o C&PC and is under examination.
3.3.4
Case No. A-540
YOUNG & GROW HQ F. No.
Status:
MARKETTING
01/85/50/168/AM07/DES-VIII
Deferred
(INDIA) PVT.
LLTD.
NC No.: 40/08
Adv. Lic. No.
RLA F. No. 03/95/040/907/AM07
Dated:13.02.2008 0310407511
Dated 10.11.2006
Application: Request is for fixation of adhoc norms.
Position: D/L. No. 46011/27/2007-PC-II dated 12.04.2007 by D/o C&PC issued by D/o
C&PC, reminder to be issued to firm seeking details.
3.3.5
Case No. A-546
DUCOL
HQ F. No.
Status:
ORGANICS &
01/83/050/1402/AM08/DES-VII
Deferred
COLOURS PVT.
LTD.
NC No.: 40/08
Adv. Lic. No.
RLA F. No. 03/94/040/235/AM08
Dated:13.02.2008 0310432661
Dated 14.06.2007
Application: Request is for fixation of adhoc norms.
Position: Deferred.
3.3.6
Case No. A-550
ONLINE CASES
177
Meet No/Date:40/87Case No.:2/7/85-ALC3/2006 Party Name:LASTOLITE
INDIA PRIVATE LIMITED ALC1/2007
13.02.2008
2 HQ File
:01/85/050/00018/AM07/
RLA File
:04/24/040/00030/AM07/
Status:Deferred
Lic.No/Date:0410080933 Defer
02.05.2006
Date:27.02.2008
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:77/23/82ALC1/2006
Party Name:MANAKSIA
LTD.( FORMERLY
HINDUSTHAN SEALS
LTD.)
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/82/050/00595/AM07/
RLA File
:02/24/040/00089/AM07/
Lic.No/Date:0210091693 Defer
24.07.2006
Date:27.02.2008
3
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:4/30/82ALC1/2006
4 HQ File
:01/82/050/00933/AM07/
Party Name:MELZER
CHEMICALS PVT. LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:31/24/040/00200/AM07/
Lic.No/Date:3110026478 Defer
14.09.2006
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:3/30/85ALC3/2006
5 HQ File
:01/85/050/00145/AM07/
Party Name:KUBER
CONSTRUCTION
PRIVATE LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:02/24/040/00197/AM07/
Lic.No/Date:0210094438 Defer
17.10.2006
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:5/43/87ALC1/2006
9 HQ File
:01/87/050/00716/AM07/
Party Name:REGALIA
LAMINATES
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00539/AM07/
Lic.No/Date:0510193987 Defer
08.11.2006
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:489/24/87ALC1/2007
Party Name:VISEN
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
11 HQ File
:01/87/050/00741/AM07/
RLA File
:03/95/040/01006/AM07/
Lic.No/Date:0310408686 Defer
17.11.2006
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA.
178
Case No.:8/41/82ALC1/2006
14 HQ File
:01/82/050/01393/AM07/
Party Name:BHAGWAN
SINGH TANDON
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00724/AM07/
Lic.No/Date:0510195599 Defer
04.12.2006
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:532/24/87ALC1/2007
23 HQ File
:01/87/050/00847/AM07/
Party Name:HALDIA
Meet No/Date:40/87PETROCHEMICALS LTD. ALC1/2007
13.02.2008
RLA File
:02/24/040/00263/AM07/
Status:Deferred
Lic.No/Date:0210096642 Defer
22.12.2006
Date:12.03.2008
Position: Copy of application not received from RLA; Application to be called from
RLA.
Case No.:539/24/87ALC1/2007
24 HQ File
:01/87/050/00865/AM07/
Party Name:POLYSET
PLASTICS PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/95/040/01147/AM07/
Lic.No/Date:0310414308 Defer
03.01.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA.
Case No.:582/24/87ALC1/2007
HQ File
29 :01/87/050/00908/AM07/
Party Name:AVLIGHT
AUTOMOTIVES LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00863/AM07/
Lic.No/Date:0510198057 Defer
18.01.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA and letter to be issued to firm seeking details as per D/L. No. 46011/90/2006-PCII dated 05.07.2007 by D/o C&PC issued by D/o C&PC.
Case No.:606/24/87ALC1/2007
Party Name:AMTEX DYE
CHEM INDUSTRIES
Meet No/Date:40/87ALC1/2007
13.02.2008
31 HQ File
:01/87/050/00928/AM07/
RLA File
:08/24/040/00311/AM07/
Lic.No/Date:0810062600 Defer
24.01.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA. Moreover, no data in available
in online agenda generated from the system. Application to be called from RLA.
Case No.:621/24/87ALC1/2007
Party Name:JAI CORP
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00954/AM07/
RLA File
:03/94/040/01026/AM07/
Lic.No/Date:0310417440 Defer
25.01.2007
Date:12.03.2008
32
Status:Deferred
179
Position: Copy of application not received from RLA; Application to be called from
RLA.
Case No.:616/24/87ALC1/2007
34 HQ File
:01/87/050/00950/AM07/
Party Name:PRIMEX
PLASTICS (P) LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:07/24/040/00736/AM07/
Lic.No/Date:0710049930 Defer
02.02.2007
Date:27.02.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA.
Case No.:12/49/81ALC2/2006
35 HQ File
:01/81/050/00888/AM07/
Party Name:PCI LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00860/AM07/
Lic.No/Date:0510198906 Defer
05.02.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:623/24/87ALC1/2007
36 HQ File
:01/87/050/00957/AM07/
Party Name:PODDAR
PIGMENTS LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:13/24/040/00025/AM07/
Lic.No/Date:1310023689 Defer
05.02.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application received from RLA and forwarded to DES-IV.
Case No.:660/24/87ALC1/2007
Party Name:TETRA PAK
INDIA PVT LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
39 HQ File
:01/87/050/00990/AM07/
RLA File
:31/24/040/00387/AM07/
Lic.No/Date:3110028105 Defer
12.02.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA and to be sent to D/o C&PC.
Case No.:12/2/87ALC1/2007
41 HQ File
:01/87/050/01007/AM07/
Party Name:SRF
POLYMERS LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00176/AM07/
Lic.No/Date:0410087576 Defer
13.02.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
42
Case No.:15/49/87ALC1/2006
Party Name:SRF
POLYMERS LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
RLA File
Lic.No/Date:0410087577 Defer
Status:Deferred
180
:01/87/050/01008/AM07/
:04/24/040/00250/AM07/
13.02.2007
Date:27.02.2008
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:10/50/87ALC1/2006
43 HQ File
:01/87/050/01024/AM07/
Party Name:SRF
POLYMERS LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00396/AM07/
Lic.No/Date:0410087644 Defer
15.02.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:2/6/87ALC1/2007
44 HQ File
:01/87/050/01038/AM07/
Party Name:VEEKAY
POLYCOATS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00935/AM07/
Lic.No/Date:0510199745 Defer
20.02.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:717/24/87ALC1/2007
Party Name:MULTIVAC
INDIA PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
49 HQ File
:01/87/050/01060/AM07/
RLA File
:05/24/040/00971/AM07/
Lic.No/Date:0510200114 Defer
27.02.2007
Date:27.02.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA.
Case No.:1/17/87ALC1/2007
50 HQ File
:01/87/050/01074/AM07/
Party Name:STYLO
TABLEWARES
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:24/24/040/00034/AM07/
Lic.No/Date:2410018521 Defer
02.03.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:751/24/87ALC1/2007
Party
Name:CHIDAMBARAM
FISHNETS PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
51 HQ File
:01/87/050/01093/AM07/
RLA File
:04/24/040/00468/AM07/
Lic.No/Date:0410088206 Defer
09.03.2007
Date:27.02.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA.
52
Case No.:754/24/87ALC1/2007
Party Name:ANAND
NISHIKAWA COMPANY
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
RLA File
Lic.No/Date:0510200918 Defer
Status:Deferred
181
:01/87/050/01097/AM07/
:05/24/040/00899/AM07/
13.03.2007
Date:12.03.2008
Position: Copy of application not received from RLA; Application to be called from
RLA and referred to DIPP.
Case No.:11/5/87ALC1/2007
54 HQ File
:01/87/050/01109/AM07/
Party Name:ASSOCIATED Meet No/Date:40/87CAPSULES PVT.
ALC1/2007
LIMITED
13.02.2008
RLA File
:03/94/040/01315/AM07/
Status:Deferred
Lic.No/Date:0310423173 Defer
14.03.2007
Date:27.02.2008
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:12/8/87ALC1/2007
55 HQ File
:01/87/050/01127/AM07/
Party Name:HASOLON
Meet No/Date:40/87NYLON PRODUCTS PVT. ALC1/2007
LTD.
13.02.2008
RLA File
:08/24/040/00366/AM07/
Status:Deferred
Lic.No/Date:0810063816 Defer
22.03.2007
Date:27.02.2008
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:777/24/87ALC1/2007
56 HQ File
:01/87/050/01128/AM07/
Party Name:MILLENNIUM Meet No/Date:40/87LAMINATES PVT. LTD., ALC1/2007
13.02.2008
RLA File
:08/24/040/00365/AM07/
Status:Deferred
Lic.No/Date:0810063824 Defer
22.03.2007
Date:12.03.2008
Position: Copy of application not received from RLA. Moreover, no data in available
in online agenda generated from the system. Application to be called from RLA.
Case No.:788/24/87ALC1/2007
Party Name:
MILLENNIUM
LAMINATES PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
57 HQ File
:01/87/050/01138/AM07/
RLA File
:08/24/040/00360/AM07/
Lic.No/Date:0810063834 Defer
23.03.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA. Moreover, no data in available
in online agenda generated from the system. Application to be called from RLA.
Case No.:790/24/87ALC1/2007
Party Name:
MILLENNIUM
LAMINATES PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
58 HQ File
:01/87/050/01139/AM07/
RLA File
:08/24/040/00363/AM07/
Lic.No/Date:0810063835 Defer
23.03.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA. Moreover, no data in available
in online agenda generated from the system. Application to be called from RLA.
59
Case No.:791/24/87ALC1/2007
Party Name: ALFA ICA
(INDIA) LTD.,
Meet No/Date:40/87ALC1/2007
Status:Deferred
182
13.02.2008
HQ File
:01/87/050/01142/AM07/
RLA File
:08/24/040/00373/AM07/
Lic.No/Date:0810063870 Defer
26.03.2007
Date:12.03.2008
Position: Copy of application not received from RLA. Moreover, no data in available
in online agenda generated from the system. Application to be called from RLA.
Case No.:15/8/87ALC1/2007
61 HQ File
:01/87/050/01150/AM07/
Party Name:SRF
POLYMERS LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00490/AM07/
Lic.No/Date:0410088619 Defer
28.03.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:2/10/87ALC1/2007
62 HQ File
:01/87/050/01152/AM07/
Party Name:AVLIGHT
AUTOMOTIVES LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/01024/AM07/
Lic.No/Date:0510201640 Defer
28.03.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
63
Case No.:1/18/87ALC1/2007
Party Name: ASP SEALING Meet No/Date:40/87PRODUCT LTD.
ALC1/2007
13.02.2008
HQ File
:01/87/050/00008/AM08/
RLA File
:05/24/040/01079/AM07/
Status:Deferred
Lic.No/Date:0510202035 Defer
02.04.2007
Date:12.03.2008
Position: As per comments dated 30.01.20008 of DIPP, D/L has been issued by
DGFT seeking following details from firm:
i)
Specific name of Rubber Goods;
ii)
Bifurcation in the quantity of Hoses and Rubber Goods;
iii)
Net content of each type of Synthetic Rubber in export; and
iv)
Trifurcation in the quantity of different Rubber.
Case No.:23/8/87ALC1/2007
64 HQ File
:01/87/050/00004/AM08/
Party Name:COLOUR
FLAIR POWDER
COATINGS PVT.LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:31/24/040/00441/AM07/
Lic.No/Date:3110028824 Defer
03.04.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:11/4/85ALC3/2007
Party Name:SPACEWOOD Meet No/Date:40/87FURNISHERS (P)LTD.,
ALC1/2007
13.02.2008
HQ File
:01/85/050/00004/AM08/
RLA File
:03/95/040/01281/AM07/
65
Status:Deferred
Lic.No/Date:0310425703 Defer
05.04.2007
Date:27.02.2008
183
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:27/8/87ALC1/2007
66 HQ File
:01/87/050/00007/AM08/
Party Name:COLOUR
FLAIR POWDER
COATINGS PVT.LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:31/24/040/00440/AM07/
Lic.No/Date:3110028844 Defer
05.04.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:3/10/87ALC1/2007
68 HQ File
:01/87/050/00022/AM08/
Party Name:BIHANI
MANUFACTURING CO.
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00027/AM08/
Lic.No/Date:0510202447 Defer
12.04.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:35/8/87ALC1/2007
71 HQ File
:01/87/050/00023/AM08/
Party Name:ASTRAL
POLYTECHNIK LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:08/24/040/00323/AM07/
Lic.No/Date:0810064258 Defer
13.04.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:36/8/87ALC1/2007
72 HQ File
:01/87/050/00024/AM08/
Party Name:ASTRAL
POLYTECHNIK LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:08/24/040/00324/AM07/
Lic.No/Date:0810064259 Defer
13.04.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:38/8/87ALC1/2007
74 HQ File
:01/87/050/00030/AM08/
Party Name:L M
Meet No/Date:40/87GLASFIBER (INDIA) PVT ALC1/2007
LTD
13.02.2008
RLA File
:07/24/040/00040/AM08/
Status:Deferred
Lic.No/Date:0710051313 Defer
18.04.2007
Date:27.02.2008
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:4/9/87ALC1/2007
75 HQ File
:01/87/050/00031/AM08/
Party Name:ARC
CHEMICALS PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/94/040/01346/AM07/
Lic.No/Date:0310427267 Defer
19.04.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
184
Case No.:15/24/87ALC1/2007
HQ File
76 :01/87/050/00033/AM08/
Party Name:TTK LIG
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00434/AM07/
Lic.No/Date:0410089099 Defer
20.04.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA. As per comments dated 13.02.20008 of DIPP, following details are to be
obtained from firm:
i)
Net contents of Benzocaine in the export product.
Case No.:21/8/80ALC2/2007
77 HQ File
:01/80/050/00051/AM08/
Party Name:AUM IMPEX
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/94/040/01487/AM07/
Lic.No/Date:0310427572 Defer
23.04.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:6/10/87ALC1/2007
79 HQ File
:01/87/050/00071/AM08/
Party Name:SHAILY
ENGINEERING PLASTIC
LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:34/24/040/00269/AM07/
Lic.No/Date:3410018705 Defer
01.05.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:1/23/87ALC1/2007
84 HQ File
:01/87/050/00087/AM08/
Party Name:SNF [INDIA]
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:09/24/040/00026/AM08/
Lic.No/Date:0910030210 Defer
08.05.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:9/10/87ALC1/2007
86 HQ File
:01/87/050/00093/AM08/
Party Name:DIVINE
POLYMER PRODUCTS
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/94/040/00071/AM08/
Lic.No/Date:0310429004 Defer
10.05.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:22/9/87ALC1/2007
87 HQ File
:01/87/050/00091/AM08/
Party Name:DIVINE
POLYMER PRODUCTS
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/94/040/00063/AM08/
Lic.No/Date:0310429002 Defer
10.05.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
185
Case No.:6/19/87ALC1/2007
88 HQ File
:01/87/050/00095/AM08/
Party Name:PRINT
PROCESS,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00032/AM08/
Lic.No/Date:0410089401 Defer
11.05.2007
Date:05.03.2008
Status:Deferred
Position: Case listed in NC Meeting 36/08 dated 16.01.2008 and deferred.
Case No.:100/24/87ALC1/2007
Party Name:NARENDRA
POLY-PLAST
Meet No/Date:40/87ALC1/2007
13.02.2008
95 HQ File
:01/87/050/00128/AM08/
RLA File
:03/95/040/00137/AM08/
Lic.No/Date:0310430246 Defer
22.05.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA. Application to be called from RLA and to be sent to D/o C&PC.
Case No.:5/19/87ALC1/2007
96 HQ File
:01/87/050/00130/AM08/
Party Name:DIVINE
POLYMER PRODUCTS
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/94/040/00125/AM08/
Lic.No/Date:0310430873 Defer
29.05.2007
Date:05.03.2008
Status:Deferred
Position: Case listed in NC Meeting 37/08 dated 23.01.2008 and deferred.
98
Case No.:109/24/87ALC1/2007
Party Name:PIX
TRANSMISSIONS LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00140/AM08/
RLA File
:03/95/040/00144/AM08/
Lic.No/Date:0310431230 Defer
31.05.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA, and hence not sent to DIPP.
RLA has informed vide their letter No. 03/95/040/00144/AM08/2163 dated
05.02.2008 that this AA has been issued on repeat basis as per NC decision in its
Meeting No. 48/07 dated 14.03.2007 (HQ F. No. 01/83/50/AM07/DES-IV) and hence
sets of application are not sent to Headquarters.
Case No.:104/24/87ALC1/2007
Party Name:SNF [INDIA]
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
99 HQ File
:01/87/050/00134/AM08/
RLA File
:09/24/040/00439/AM07/
Lic.No/Date:0910030411 Defer
01.06.2007
Date:27.02.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA.
Case No.:1/22/87101 ALC1/2007
Party Name:K.R.T.
POLYMERS, (PROP:R.
MAHENDRAN)
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Deferred
186
HQ File
:01/87/050/00142/AM08/
RLA File
:32/24/040/00012/AM08/
Lic.No/Date:3210035527 Defer
06.06.2007
Date:27.02.2008
Position: Case was not in agenda.
Case No.:116/24/87ALC1/2007
Party Name:SRF
POLYMERS LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
106 :01/87/050/00152/AM08/
RLA File
:04/24/040/00103/AM08/
Lic.No/Date:0410090052 Defer
19.06.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA. Application to be called from RLA and to be sent to D/o C&PC. D/L No.
46011/84/2005-PC-II dated 03.09.2007 issued by D/o C&PC, reminder to be issued
by DGFT.
Case No.:120/24/87ALC1/2007
107 HQ File
:01/87/050/00156/AM08/
Party Name:ESSEN
SPECIALITY FILMS
PVT.LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:24/24/040/00002/AM08/
Lic.No/Date:2410019114 Defer
19.06.2007
Date:12.03.2008
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/95/040/01403/AM07/
Lic.No/Date:0310433293 Defer
20.06.2007
Date:12.03.2008
Status:Deferred
Decision :
Case No.:6/23/87ALC1/2007
110 HQ File
:01/87/050/00222/AM08/
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:122/24/87ALC1/2007
113 HQ File
:01/87/050/00160/AM08/
Party Name:NITREX
CHEMICALS INDIA
LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00182/AM08/
Lic.No/Date:0510205340 Defer
25.06.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA. Application to be called from RLA and to be sent to D/o C&PC.
Case No.:179/24/87ALC1/2007
120 HQ File
:01/87/050/00228/AM08/
Party Name:DUJODWALA Meet No/Date:40/87PAPER CHEMICALS LTD ALC1/2007
13.02.2008
RLA File
:03/94/040/00289/AM08/
Status:Deferred
Lic.No/Date:0310434007 Defer
26.06.2007
Date:12.03.2008
Position: D/L issued in other cases of same fim; to be reminded.
124 Case No.:144/24/87-
Party Name:AAREM
Meet No/Date:40/87-
Status:Deferred
187
ALC1/2007
CHEMICALS (P) LTD.,
ALC1/2007
13.02.2008
HQ File
:01/87/050/00190/AM08/
RLA File
:02/24/040/00081/AM08/
Lic.No/Date:0210101970 Defer
29.06.2007
Date:12.03.2008
Position: Copy of application not received from RLA; Application to be called from
RLA. Application to be called from RLA and to be sent to D/o C&PC.
Case No.:2/22/87ALC1/2007
Party Name:MANAKSIA
LTD.( FORMERLY
HINDUSTHAN SEALS
LTD.)
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00194/AM08/
RLA File
:02/24/040/00094/AM08/
Lic.No/Date:0210102069 Defer
02.07.2007
Date:12.03.2008
127
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:27/19/87ALC1/2007
Party Name:KALPANA
INDUSTRIES LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
131 HQ File
:01/87/050/00240/AM08/
RLA File
:03/94/040/00302/AM08/
Lic.No/Date:0310435337 Defer
06.07.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:163/24/87ALC1/2007
Party Name:KALPANA
INDUSTRIES LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
133 HQ File
:01/87/050/00213/AM08/
RLA File
:03/94/040/00373/AM08/
Lic.No/Date:0310435874 Defer
11.07.2007
Date:27.02.2008
Case No.:167/24/87ALC1/2007
Party Name:SNF [INDIA]
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
136 HQ File
:01/87/050/00217/AM08/
RLA File
:09/24/040/00067/AM08/
Lic.No/Date:0910030878 Defer
13.07.2007
Date:12.03.2008
Status:Deferred
Position: Deferred.
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA. Application to be called from RLA and to be sent to D/o C&PC.
Case No.:4/20/87ALC1/2007
137 HQ File
:01/87/050/00224/AM08/
Party Name:SRF
POLYMERS LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00504/AM07/
Lic.No/Date:0410090268 Defer
16.07.2007
Date:12.03.2008
Status:Deferred
Position: D/L No. 46011/84/2005-PC-II dated 03.09.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
188
Case No.:180/24/87ALC1/2007
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
140 HQ File
:01/87/050/00230/AM08/
RLA File
:03/95/040/00002/AM08/
Lic.No/Date:0310436428 Defer
17.07.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA. Application to be called from RLA and to be sent to D/o C&PC.
Case No.:23/19/87ALC1/2007
141 HQ File
:01/87/050/00229/AM08/
Party Name:CONCORD
Meet No/Date:40/87NONWOVEN
ALC1/2007
INDUSTRIES PVT. LTD., 13.02.2008
RLA File
:02/24/040/00126/AM08/
Status:Deferred
Lic.No/Date:0210102433 Defer
17.07.2007
Date:05.03.2008
Position: Case listed in NC Meeting 37/08 dated 23.01.2008 and deferred.
Case No.:185/24/87ALC1/2007
Party Name:SNF [INDIA]
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
143 HQ File
:01/87/050/00248/AM08/
RLA File
:09/24/040/00153/AM08/
Lic.No/Date:0910030954 Defer
20.07.2007
Date:27.02.2008
Status:Deferred
Position: Deferred.
Case No.:134/19/83ALC1/2007
144 HQ File
:01/83/050/00848/AM08/
Party Name:KAMAL
Meet No/Date:40/87RUBPLAST INDUSTRIES ALC1/2007
(P) LTD.
13.02.2008
RLA File
:05/24/040/00282/AM08/
Status:Deferred
Lic.No/Date:0510206636 Defer
23.07.2007
Date:27.02.2008
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:211/24/87ALC1/2007
Party Name:PIX
TRANSMISSIONS LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
151 HQ File
:01/87/050/00273/AM08/
RLA File
:03/95/040/00395/AM08/
Lic.No/Date:0310438170 Defer
02.08.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA, and hence not sent to DIPP.
Case No.:209/24/87ALC1/2007
Party Name:VISEN
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
155 HQ File
:01/87/050/00271/AM08/
RLA File
:03/95/040/00416/AM08/
Lic.No/Date:0310438513 Defer
06.08.2007
Date:27.02.2008
Position: Deferred.
Status:Deferred
189
Case No.:32/22/80ALC2/2007
Party Name:CHEMICAL
PROCESS PIPING
PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
157 HQ File
:01/80/050/00359/AM08/
RLA File
:03/94/040/00452/AM08/
Lic.No/Date:0310438668 Defer
07.08.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:20/23/87ALC1/2007
Party Name:SPECIALTY
POLYFILMS (INDIA)
PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
161 HQ File
:01/87/050/00279/AM08/
RLA File
:03/95/040/01283/AM07/
Lic.No/Date:0310438737 Defer
08.08.2007
Date:05.03.2008
Status:Deferred
Position: Case listed in NC Meeting 37/08 dated 23.01.2008 and deferred.
Case No.:23/23/87ALC1/2007
167 HQ File
:01/87/050/00288/AM08/
Party Name:MAHARSHEE Meet No/Date:40/87GEOMEMBRANE
ALC1/2007
(INDIA) PVT.LTD
13.02.2008
RLA File
:34/24/040/00091/AM08/
Status:Deferred
Lic.No/Date:3410019406 Defer
13.08.2007
Date:05.03.2008
Position: Case considered in NC Meeting 37/08 dated 23.01.2008 and deferred.
Case No.:229/24/87ALC1/2007
171 HQ File
:01/87/050/00295/AM08/
Party
Name:BLUESTREAM
MANUFACTURING
SERVICES PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/94/040/00490/AM08/
Lic.No/Date:0310439372 Defer
14.08.2007
Date:27.02.2008
Status:Deferred
Position: D/L No. 46011/125/2006-PC-II dated 29.10.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
Case No.:230/24/87ALC1/2007
Party Name:GARGI
HUTTENES ALBERTUS
PVT. LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
173 HQ File
:01/87/050/00297/AM08/
RLA File
:03/94/040/00468/AM08/
Lic.No/Date:0310439795 Defer
17.08.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application not received from RLA; Application to be called from
RLA. Application to be called from RLA and to be sent to D/o C&PC.
Case No.:232/24/87ALC1/2007
Party Name:DIVINE
POLYMER PRODUCTS
LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
174 HQ File
:01/87/050/00299/AM08/
RLA File
:03/94/040/00501/AM08/
Lic.No/Date:0310439851 Defer
17.08.2007
Date:27.02.2008
Position: Deferred.
Status:Deferred
190
Case No.:231/24/87ALC1/2007
175 HQ File
:01/87/050/00298/AM08/
Party Name:RADIANT
POLYMERS P.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00352/AM08/
Lic.No/Date:0510207744 Defer
20.08.2007
Date:12.03.2008
Status:Deferred
Position: D/L No. 46011/100/2007-PC-II dated 16.10.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
Case No.:1616/26/80ALC2/2007
176 HQ File
:01/80/050/00383/AM08/
Party Name:GARGI
ENTERPRISES,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:07/24/040/00361/AM08/
Lic.No/Date:0710052937 Defer
20.08.2007
Date:27.02.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:234/24/87ALC1/2007
177 HQ File
:01/87/050/00301/AM08/
Party Name:BULK
Meet No/Date:40/87LIQUID SOLUTIONS PVT ALC1/2007
LTD
13.02.2008
RLA File
:07/24/040/00367/AM08/
Status:Deferred
Lic.No/Date:0710052984 Defer
21.08.2007
Date:12.03.2008
Position: D/L No. 46011/182/2005-PC-II dated 29.10.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
Case No.:237/24/87ALC1/2007
178 HQ File
:01/87/050/00302/AM08/
Party Name:BULK
Meet No/Date:40/87LIQUID SOLUTIONS PVT ALC1/2007
LTD
13.02.2008
RLA File
:07/24/040/00364/AM08/
Status:Deferred
Lic.No/Date:0710052985 Defer
21.08.2007
Date:12.03.2008
Position: D/L No. 46011/129/2007-PC-II dated 12.11.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
Case No.:242/24/87ALC1/2007
Party Name:K.R.T.
POLYMERS, (PROP:R.
MAHENDRAN)
Meet No/Date:40/87ALC1/2007
13.02.2008
181 HQ File
:01/87/050/00305/AM08/
RLA File
:32/24/040/00033/AM08/
Lic.No/Date:3210036035 Defer
23.08.2007
Date:27.02.2008
Case No.:243/24/87ALC1/2007
Party Name:MACRO
POLYMERS P. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00306/AM08/
RLA File
:08/24/040/00138/AM08/
Lic.No/Date:0810066796 Defer
24.08.2007
Date:12.03.2008
Status:Deferred
Position: Deferred.
182
Status:Deferred
191
Position: Do Data in online agenda; Copy of application not received from RLA;
Application to be called from RLA.
Case No.:1942/26/81ALC2/2007
183 HQ File
:01/81/050/00280/AM08/
Party Name:THE WEST
COAST PAPER MILLS
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:07/24/040/00372/AM08/
Lic.No/Date:0710053054 Defer
27.08.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:245/24/87ALC1/2007
184 HQ File
:01/87/050/00308/AM08/
Party Name:IMAGE
LABELS PVT.LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:07/24/040/00308/AM08/
Lic.No/Date:0710053064 Defer
27.08.2007
Date:12.03.2008
Status:Deferred
Position: D/L No. 46011/88/2006-PC-II dated 29.10.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
Case No.:1/25/87ALC1/2007
185 HQ File
:01/87/050/00326/AM08/
Party Name:K.K. NAG
LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:31/24/040/00180/AM08/
Lic.No/Date:3110030541 Defer
27.08.2007
Date:12.03.2008
Status:Deferred
Position: D/L No. 46011/131/2007-PC-II dated 12.11.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
Case No.:1/26/87ALC1/2007
186 HQ File
:01/87/050/00340/AM08/
Party Name:VECEE
CEMENTOLITES &
INDUSTRIES LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/95/040/00525/AM08/
Lic.No/Date:0310441074 Defer
28.08.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:2/26/87ALC1/2007
187 HQ File
:01/87/050/00341/AM08/
Party Name:VECEE
CEMENTOLITES &
INDUSTRIES LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/95/040/00524/AM08/
Lic.No/Date:0310441082 Defer
28.08.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
188
Case No.:3/26/87ALC1/2007
Party Name:VECEE
CEMENTOLITES &
INDUSTRIES LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
RLA File
Lic.No/Date:0310441094 Defer
Status:Deferred
192
:01/87/050/00342/AM08/
:03/95/040/00523/AM08/
28.08.2007
Date:27.02.2008
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:9/26/87ALC1/2007
192 HQ File
:01/87/050/00348/AM08/
Party Name:HALDIA
Meet No/Date:40/87PETROCHEMICALS LTD. ALC1/2007
13.02.2008
Status:Deferred
RLA File
:02/24/040/00164/AM08/
Lic.No/Date:0210103868 Defer
06.09.2007
Date:27.02.2008
Case No.:13/26/87ALC1/2007
Party Name:VISEN
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
193 HQ File
:01/87/050/00352/AM08/
RLA File
:03/95/040/00185/AM08/
Lic.No/Date:0310441968 Defer
06.09.2007
Date:27.02.2008
Case No.:18/26/87ALC1/2007
Party Name:ESTEEM
INDUSTRIES PVT. LTD,
Meet No/Date:40/87ALC1/2007
13.02.2008
194 HQ File
:01/87/050/00357/AM08/
RLA File
:17/24/040/00060/AM08/
Lic.No/Date:1710001750 Defer
06.09.2007
Date:12.03.2008
Position: Deferred.
Status:Deferred
Position: Deferred.
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:19/26/87ALC1/2007
195 HQ File
:01/87/050/00358/AM08/
Party Name:MAYUR
UNIQUOTERS LTD,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:13/24/040/00013/AM08/
Lic.No/Date:1310025010 Defer
07.09.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:21/26/87ALC1/2007
Party Name:NOUVEAW
EXPORTS PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
197 HQ File
:01/87/050/00360/AM08/
RLA File
:03/95/040/00514/AM08/
Lic.No/Date:0310442293 Defer
10.09.2007
Date:05.03.2008
Status:Deferred
Position: Case considered in NC Meeting 37/08 dated 23.01.2008 and deferred.
Case No.:24/26/87ALC1/2007
198 HQ File
:01/87/050/00363/AM08/
Party Name:BLS
POLYMERS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00466/AM08/
Lic.No/Date:0510208833 Defer
11.09.2007
Date:27.02.2008
Status:Deferred
Position: D/L No. 46011/99/2006-PC-II dated 23/26.10.2007 issued by D/o C&PC,
193
reminder to be issued by DGFT.
Case No.:87/27/83ALC1/2007
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
199 HQ File
:01/83/050/01161/AM08/
RLA File
:03/95/040/00262/AM08/
Lic.No/Date:0310442793 Defer
12.09.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:89/27/83ALC1/2007
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
200 HQ File
:01/83/050/01163/AM08/
RLA File
:03/95/040/01158/AM07/
Lic.No/Date:0310442815 Defer
12.09.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:91/27/83ALC1/2007
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
201 HQ File
:01/83/050/01165/AM08/
RLA File
:03/95/040/00313/AM08/
Lic.No/Date:0310442832 Defer
12.09.2007
Date:27.02.2008
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:31/26/87ALC1/2007
Party Name:ESTEEM
INDUSTRIES PVT. LTD,
Meet No/Date:40/87ALC1/2007
13.02.2008
204 HQ File
:01/87/050/00370/AM08/
RLA File
:17/24/040/00055/AM08/
Lic.No/Date:1710001758 Defer
12.09.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:41/26/87ALC1/2007
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
209 HQ File
:01/87/050/00380/AM08/
RLA File
:03/95/040/00151/AM08/
Lic.No/Date:0310443532 Defer
18.09.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:42/26/87ALC1/2007
Party Name:PIDILITE
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
210 HQ File
:01/87/050/00381/AM08/
RLA File
:03/95/040/01578/AM07/
Lic.No/Date:0310443536 Defer
18.09.2007
Date:12.03.2008
Position: Copy of application to be sent to D/o C&PC.
Status:Deferred
194
Case No.:43/26/87ALC1/2007
Party
Name:MICROSPHERES
(INDIA)
Meet No/Date:40/87ALC1/2007
13.02.2008
211 HQ File
:01/87/050/00382/AM08/
RLA File
:03/95/040/00601/AM08/
Lic.No/Date:0310443638 Defer
19.09.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:44/26/87ALC1/2007
Party
Name:INJECTOPLAST
PVT.LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
212 HQ File
:01/87/050/00383/AM08/
RLA File
:06/81/040/00010/AM08/
Lic.No/Date:0610012318 Defer
20.09.2007
Date:05.03.2008
Status:Deferred
Position: Case considered in NC Meeting 39/08 dated 06.02.2008 and deferred.
Case No.:48/26/87ALC1/2007
Party Name:TESA TAPES
(INDIA)PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
215 HQ File
:01/87/050/00387/AM08/
RLA File
:03/95/040/00619/AM08/
Lic.No/Date:0310443815 Defer
20.09.2007
Date:27.02.2008
Case No.:49/26/87ALC1/2007
Party Name:VISEN
INDUSTRIES LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
216 HQ File
:01/87/050/00388/AM08/
RLA File
:03/95/040/00578/AM08/
Lic.No/Date:0310443843 Defer
20.09.2007
Date:27.02.2008
Party Name:INDIA
GLYCOLS LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00420/AM08/
Lic.No/Date:0510209638 Defer
27.09.2007
Date:27.02.2008
Status:Deferred
Position: Deferred.
Status:Deferred
Position: Deferred.
Case No.:172/27/83ALC1/2007
219 HQ File
:01/83/050/01246/AM08/
Status:Deferred
Position: Case considered in NC Meeting 38/08 dated 30.01.2008 and deferred.
Case No.:54/26/87ALC1/2007
Party
Name:INJECTOPLAST
PVT.LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
222 HQ File
:01/87/050/00393/AM08/
RLA File
:06/81/040/00011/AM08/
Lic.No/Date:0610012339 Defer
27.09.2007
Date:12.03.2008
Status:Deferred
Position: D/L No. 46011/169/2004-PC-II dated 12/20.12.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
227 Case No.:58/26/87-
Party Name:PREMIUM
Meet No/Date:40/87-
Status:Deferred
195
ALC1/2007
POLYALLOYS PVT. LTD. ALC1/2007
13.02.2008
HQ File
:01/87/050/00397/AM08/
RLA File
:34/24/040/00142/AM08/
Lic.No/Date:3410019731 Defer
28.09.2007
Date:27.02.2008
Case No.:60/26/87ALC1/2007
Party Name:NOUVEAW
EXPORTS PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
229 HQ File
:01/87/050/00399/AM08/
RLA File
:03/95/040/00647/AM08/
Lic.No/Date:0310444615 Defer
28.09.2007
Date:27.02.2008
Case No.:61/26/87ALC1/2007
Party Name:NOUVEAW
EXPORTS PVT. LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
230 HQ File
:01/87/050/00400/AM08/
RLA File
:03/95/040/00643/AM08/
Lic.No/Date:0310444627 Defer
28.09.2007
Date:27.02.2008
Position: Deferred.
Status:Deferred
Position: Deferred.
Status:Deferred
Position: D/L under issue by D/o C&PC.
Case No.:6/25/82ALC4/2007
231 HQ File
:01/82/050/00200/AM08/
Party Name:NICHIPLAST
INDIA PVT LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00499/AM08/
Lic.No/Date:0510210118 Defer
05.10.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Party Name:WELSET
PLAST EXTRUSIONS
PVT.LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/95/040/00135/AM08/
Lic.No/Date:0310446615 Defer
16.10.2007
Date:12.03.2008
Case No.:5/28/87ALC1/2007
Party Name:KRISHNA
ANTIOXIDANTS PVT.
LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00433/AM08/
RLA File
:03/94/040/00736/AM08/
Lic.No/Date:0310447187 Defer
19.10.2007
Date:27.02.2008
Case No.:4/28/87ALC1/2007
232 HQ File
:01/87/050/00432/AM08/
Status:Deferred
Position: Deferred.
237
Status:Deferred
Application: Request is for adhoc norms for following:
Sl.No.
1
EXPORT ITEM
Qty
62/0- POLY (OXY- 168000.000
UOM
K.G
FOB (Rs.)
11424000.00
FOB
(Currency)
285600.00
196
1, 2-ETHANEDIYL)
ALPHA-BUTYLOMEGAHYDROXY-85%
MIN
Sl.No.
1
2
3
US$
Total 11,424,000.00
285,600.00
UOM
CIF (Rs.)
CIF (Currency)
IMPORT ITEM
Qty
N-BUTANOL /
NORMAL BUTYL 41210.400 K.G
ALCOHOL
ETHYLENE OXIDE 103017.000 K.G
M.S. DRUMS /
800.000
Number
BARRELS
Total
2967148.80
74178.72 US$
6387091.20
159677.28 US$
1088000.00
27200.00 US$
10,442,240.00 261,056.00
Position: ITC (HS) Code of export item is indicated as 39072010.
Case No.:6/28/87ALC1/2007
238 HQ File
:01/87/050/00434/AM08/
Party Name:VEEKAY
POLYCOATS LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:05/24/040/00554/AM08/
Lic.No/Date:0510210878 Defer
22.10.2007
Date:12.03.2008
Party Name:PIX
TRANSMISSIONS LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:03/95/040/00631/AM08/
Lic.No/Date:0310447341 Defer
23.10.2007
Date:27.02.2008
Status:Deferred
Position: Deferred.
Case No.:8/28/87ALC1/2007
240 HQ File
:01/87/050/00436/AM08/
Status:Deferred
Position: Copy of application not received from RLA, and hence not sent to DIPP.
Case No.:4/29/87ALC1/2007
241 HQ File
:01/87/050/00440/AM08/
Party Name:ALOK
Meet No/Date:40/87MASTERBATCHES LTD., ALC1/2007
13.02.2008
Status:Deferred
RLA File
:05/24/040/00561/AM08/
Lic.No/Date:0510211061 Defer
24.10.2007
Date:27.02.2008
Case No.:5/29/87ALC1/2007
Party Name:KALPANA
INDUSTRIES LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00443/AM08/
RLA File
:03/94/040/00740/AM08/
Lic.No/Date:0310447616 Defer
24.10.2007
Date:27.02.2008
Position: Deferred.
242
Status:Deferred
197
Position: Deferred.
Case No.:8/29/87ALC1/2007
245 HQ File
:01/87/050/00446/AM08/
Party Name:STAHL INDIA Meet No/Date:40/87PVT LTD
ALC1/2007
13.02.2008
Status:Deferred
RLA File
:04/24/040/00218/AM08/
Lic.No/Date:0410091761 Defer
25.10.2007
Date:27.02.2008
Case No.:10/29/87ALC1/2007
Party Name:KALPANA
INDUSTRIES LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
246 HQ File
:01/87/050/00448/AM08/
RLA File
:03/94/040/00773/AM08/
Lic.No/Date:0310447843 Defer
25.10.2007
Date:12.03.2008
Position: Deferred.
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Party Name:ESSILOR
MANUFACTURING
INDIA PVT LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:07/24/040/00531/AM08/
Lic.No/Date:0710054145 Defer
26.10.2007
Date:12.03.2008
Case No.:22/29/87ALC1/2007
Party Name:GARWARE
POLYESTER LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
249 HQ File
:01/87/050/00460/AM08/
RLA File
:03/94/040/00744/AM08/
Lic.No/Date:0310448127 Defer
26.10.2007
Date:27.02.2008
Case No.:13/29/87ALC1/2007
Party Name:BUILDMET
FIBRES PVT LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
250 HQ File
:01/87/050/00451/AM08/
RLA File
:07/24/040/00546/AM08/
Lic.No/Date:0710054198 Defer
29.10.2007
Date:12.03.2008
Case No.:9/29/87ALC1/2007
248 HQ File
:01/87/050/00447/AM08/
Status:Deferred
Position: Deferred.
Status:Deferred
Position: Deferred.
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:14/29/87ALC1/2007
251 HQ File
:01/87/050/00452/AM08/
Position: Deferred.
Party Name:ATUL
LIMITED,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:08/24/040/00193/AM08/
Lic.No/Date:0810068207 Defer
31.10.2007
Date:27.02.2008
Status:Deferred
198
Case No.:15/29/87ALC1/2007
252 HQ File
:01/87/050/00453/AM08/
Party Name:IRE-TEX
PREMIER INDIA
PVT.LTD,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:07/24/040/00552/AM08/
Lic.No/Date:0710054256 Defer
31.10.2007
Date:12.03.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
256
Case No.:20/29/87ALC1/2007
Party Name:ASP
SEALING PRODUCT
LTD.
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00458/AM08/
RLA File
:05/24/040/00574/AM08/
Lic.No/Date:0510211374 Defer
01.11.2007
Date:12.03.2008
Status:Deferred
Position: As per comments dated 13.02.20008 of DIPP, the following details are to
be obtained from firm:
i)
Specific name of Rubber Goods;
ii)
Bifurcation in the quantity of Hoses and Rubber Goods;
iii)
Net content of each type of Synthetic Rubber in export; and
iv)
Trifurcation in the quantity of different Rubber.
Case No.:21/29/87ALC1/2007
257 HQ File
:01/87/050/00459/AM08/
Party Name:G - PLAST
PVT.LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:32/24/040/00048/AM08/
Lic.No/Date:3210036566 Defer
01.11.2007
Date:27.02.2008
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:1/40/81ALC2/2007
258 HQ File
:01/81/050/00439/AM08/
Party Name:SRF
POLYMERS LIMITED
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:04/24/040/00039/AM08/
Lic.No/Date:0410092102 Defer
15.11.2007
Date:12.03.2008
Status:Deferred
Position: D/L No. 46011/84/2005-PC-II dated 03.09.2007 issued by D/o C&PC,
reminder to be issued by DGFT.
Case No.:16/40/81ALC2/2007
259 HQ File
:01/81/050/00454/AM08/
Party Name:VEM
Meet No/Date:40/87TECHNOLOGIES P.LTD., ALC1/2007
13.02.2008
RLA File
:09/24/040/00373/AM08/
Status:Deferred
Lic.No/Date:0910032264 Defer
29.11.2007
Date:12.03.2008
Position: D/L to remind as in other cases of same firm.
Case No.:2/36/87262 ALC1/2007
Party Name:G - PLAST
PVT.LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
Status:Deferred
199
HQ File
:01/87/050/00550/AM08/
RLA File
:32/21/040/00198/AM08/
Lic.No/Date:3210036922 Defer
20.12.2007
Date:27.02.2008
Position: Copy of application to be sent to D/o C&PC.
Party Name:K.R.T.
POLYMERS,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:32/24/040/00061/AM08/
Lic.No/Date:3210036928 Defer
20.12.2007
Date:27.02.2008
Case No.:4/36/87ALC1/2007
Party Name:DSM
ENGINEERING
PLASTICS (INDIA) PVT.
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00552/AM08/
RLA File
:31/24/040/00301/AM08/
Lic.No/Date:3110032026 Defer
20.12.2007
Date:12.03.2008
Case No.:6/36/87ALC1/2007
Party Name:DSM
ENGINEERING
PLASTICS (INDIA) PVT.
LTD
Meet No/Date:40/87ALC1/2007
13.02.2008
HQ File
:01/87/050/00554/AM08/
RLA File
:31/24/040/00269/AM08/
Lic.No/Date:3110032041 Defer
24.12.2007
Date:12.03.2008
Case No.:3/36/87ALC1/2007
263 HQ File
:01/87/050/00551/AM08/
Status:Deferred
Position: Deferred.
264
Status:Deferred
Position: Deferred.
266
Status:Deferred
Position: Copy of application to be sent to D/o C&PC.
Case No.:8/36/87ALC1/2007
268 HQ File
:01/87/050/00556/AM08/
Party Name:ESSEN
SPECIALITY FILMS
PVT.LTD.,
Meet No/Date:40/87ALC1/2007
13.02.2008
RLA File
:24/24/040/00008/AM08/
Lic.No/Date:2410020232 Defer
27.12.2007
Date:27.02.2008
Position: Copy of application to be sent to D/o C&PC.
Meeting ended with thanks to Chair and all participants.
Status:Deferred