
CCNA(Routing and Switching)
CCNA Certification skills:
Install, configure, and operate simple-routed LAN, routed WAN, and switched LAN networks.


ITM - Internetworking Technology Multimedia
 Cost $ 50
 Self Learning
 CD ROM
 The CD explores terminology, protocols, devices, and the OSI model through text,
illustrations, and QuickTime animations.
 Covered in CS555

CRLS - Cisco Routers and LAN Switches
 Time : 5 days
 It provides the configuration, and troubleshooting information that technical products
sold through two tier distribution. Given a specification configure a family of Cisco
routers using Cisco IOS Given a specification configure a family of Cisco and Fast Hubs.
Understand the Network Management options available for Cisco routers, switches, and
hubs. Given a specification configure a family of routers Cisco Works for Windows.
 Covered in CS555
CCNP- Routing
Install, configure, operate, and troubleshoot complex routed LAN, routed WAN, Switched LAN
networks, and Dial Access Services.
 (ACRC) - Advanced Cisco Router Configuration
 5 days
 After successfully completing this course, you will be able configure Cisco routers for
operation in large or multiprotocol internetworks. Your studies laboratory exercises that focus
primarily on scalable technologies and the Cisco IOS™ software features are most useful in
building large or growing These features include standard and extended access lists
queuing, scalable routing protocols, such as OSPF EIGRP, route redistribution, route
summarization, dial-on-demand routing, dial backup, and the integration bridging with a
routed network.
 Covered in CS 554

CLSC – Cisco LAN Switch Configuration
 Time : 5 days
 Describes the major features of the Catalyst switches Describe the architecture and functions
of the major components of the Catalyst Place Catalyst series switches in a network optimal
performance Use the command-line or menu-driven interface configure the Catalyst series
switches and switching Use the command-line or menu-driven interface to configure trunks,
virtual LANs, ATM LAN Maintain Catalyst series switches and perform Troubleshooting.
 covered in 554

CMTD-Configuring, Monitoring, and Troubleshooting Dialup Services
 Time - 5days
 Install, configure, monitor, and troubleshoot ISDN and dialup access products. Dialup
Concepts, ISDN Concepts, High Speed Remote Access Solutions Dialup Hardware Products,
Cisco IOS Dialup Features, Cisco IOS Basics, Terminal Services, Modem Concepts and
Configuration, Modem Auto-Configuration, Configuration PPP, Dialup Networking with
Windows 95, Dial-on-Demand Routing, Configuring ISDN Dialup Cost Management and



CIT - Cisco Troubleshooting

5 Days

CIT 4.0 teaches students how to baseline and an environment using Cisco routers and
switches for multiprotocol client hosts and servers connected with the
following
Ethernet, Fast Ethernet, and Token Ring Serial, Frame Relay, and ISDN BRI WANs.

Covered in CS554
CCIE – Cisco Certified Internetwork Expert
 No Class – Only Exam


IOS Performance, Installing and Configuring Cisco 700 Series Routers, Network Address
Translation, Protocol Translation
(Covered in CS554)
Install, configure, operate, and troubleshoot complex routed LAN, routed switched LAN and
ATM LANE networks, and Dial Access services. Diagnose and resolve network faults. Use
packet/frame analysis and Cisco debugging Document and report the problem-solving processes
used.
CCDA - Cisco Certified Design Associate
Network-Layer , Filtering with Access List, VLAN use and propagation, Network sizing
 DCN - Designing Cisco Networks
 Price: $389
 Self Paced Training Kit on CD-ROM
 Designing the, Provisioning Cisco hardware and media for a LAN, Provisioning Cisco hardware,
and media for a WAN, Designing a network-layer addressing and naming model, Selecting
routing and bridging protocols, Provisioning software features, Selecting a network management
strategy, Writing a design document.
 Covered in CS554

CCDP

(ACRC) - Advanced Cisco Router Configuration
 5 days
 After successfully completing this course, you will be able configure Cisco routers for
operation in large or multiprotocol internetworks. Your studies laboratory exercises that focus
primarily on scalable technologies and the Cisco IOS™ software features are most useful in
building large or growing These features include standard and extended access lists
queuing, scalable routing protocols, such as OSPF EIGRP, route redistribution, route
summarization, dial-on-demand routing, dial backup, and the integration bridging with a
routed network.
 Covered in CS 554

CLSC – Cisco LAN Switch Configuration
 Time : 5 days
 Describes the major features of the Catalyst switches Describe the architecture and functions
of the major components of the Catalyst Place Catalyst series switches in a network optimal
performance Use the command-line or menu-driven interface configure the Catalyst series
switches and switching Use the command-line or menu-driven interface to configure trunks,
virtual LANs, ATM LAN Maintain Catalyst series switches and perform Troubleshooting.
 covered in 554



CMTD-Configuring, Monitoring, and Troubleshooting Dialup Services
 Time - 5days
 Install, configure, monitor, and troubleshoot ISDN and dialup access products. Dialup
Concepts, ISDN Concepts, High Speed Remote Access Solutions Dialup Hardware Products,
Cisco IOS Dialup Features, Cisco IOS Basics, Terminal Services, Modem Concepts and
Configuration, Modem Auto-Configuration, Configuration PPP, Dialup Networking with
Windows 95, Dial-on-Demand Routing, Configuring ISDN Dialup Cost Management and
IOS Performance, Installing and Configuring Cisco 700 Series Routers, Network Address
Translation, Protocol Translation
 (Covered in CS554)

CID – Cisco Internetwork design
 5 days
 Develop a functional understanding of the standard problem-solving model, common
network troubleshooting tools, and the diagnostic tools provided with Cisco to analyze and
resolve network problems in IP, WAN, Novell IPX, and AppleTalk environments. Topics
covered include Campus LAN Design, TCP/IP Network Design, Desktop Protocol Design,
WAN Design, SNA Design.
 New Course
CCNA(WAN Switching)

WQS - WAN Quick Start
 Self Study CD-ROM
 Price: $100
 Serial, T1/E1/J1-Y1 transmission, DS3, E3, and OC-3c transmission, Digital voice technical
concepts, Frame Relay technical concepts, ATM technical concepts.
 New Course

ICWS - Installing Cisco WAN Switches
 5 days
 This course prepares you to install, upgrade, and replace Cisco StrataCom BPX®, IGX, and
AXIS products. It also provides troubleshooting information helpful to the telephone support
as they remotely troubleshoot problems. This course teaches you to describe the functions of
the Cisco WAN products; to unpack, install, and interconnect the BPX, AXIS, IGX, and IPX
switches; and to create a large functioning network. You will also software and firmware as
appropriate in the products as well as troubleshoot and repair basic problems encountered.
 Covered in CS554
CCNP (WAN Switching)



MSSC - Multiband Switch and Service Configuration
4 days
Information Flow, User Interface and Node Display, Node Configuration, Activating, Displaying,
and Configuring Trunks, Activating, Displaying, and Configuring Lines, Configuring and
Displaying Voice Channels, Configuring and Displaying Voice Connections, Configuring and
Displaying Data Channels, Configuring and Displaying Data Connections, Activating,
Configuring, and Displaying Frame Relay Ports, Configuring and Displaying Frame Relay
Connections, Configuring and Displaying Frame Relay Connections, Activating and Configuring
ATM Lines, Configuring and Displaying ATM Connections, IGX Node: ATM to Frame Relay
Internetworking, Displaying Channel and Port Statistics, Trunk Utilization and Load Monitoring,
Connection Routing, Synchronizing the Network, Managing Jobs, Troubleshooting Connections,
Network Alarms and Troubleshooting, Optional Chapters,


BSSC - BPX Switch and Service Configuration
 4 days
 Participants will be introduced to features and observe demonstration of appropriate commands,
perform hands-on lab exercises. Lab exercises are to demonstrate a participant's ability to
complete configuration tasks. Participants will work groups of three on a single PC or terminal
connected BPX node. Topics covered include
 BPX Service Node Overview
 BPX System Hardware
 Information Flow
 User Interface and Node Display
 Node Configuration
 Trunk Configuration
 Line and Port Configuration
 ATM Connection Configuration
 Monitoring ATM Port and Channel Statistics
 Connection Routing
 Trunk Loading and Utilization
 Network Alarms and Troubleshooting
 Network Synchronization
 New Course

MASC - MGX ATM Concentrator Configuration
 4 days
 Participants will be introduced to Configure MGX 8220 concentrators from into a network (using
a BPX network as the ATM (backbone) that supports circuit emulation, Relay, ATM, and ATM
inverse multiplexed services. Operate and monitor the MGX 8220 concentrators in the network
once traffic has been established.
 New Course

SVIO - StrataView Plus Installation and Operation
 4 days
 The goal of this course is to Cisco enterprise customers and employees the skills and knowledge
required to effectively use the StrataView Plus management software to manage Cisco WAN
switches This course will teach the latest information about StrataView Plus available at the time
of course development. The course will focus on all aspects network management including
installing the applications, identifying system requirements, and the software installation.
Additionally, the course will the required switch software to support StrataView Plus Release 9.1.
A listing of supported hardware by StrataView Plus will be presented in this class.
 New Course
CCDP (WAN-Switching)





DSWVS - Designing Switched WAN and Voice Solutions
Price: $100
Self Paced CD-Rom
Course Outline : - Switched WAN and Voice, Switched WAN and Voice Preliminary Network
Design, StrataSphere Network Modeler Tool Tutorial, Switched WAN and Voice Solutions
Design.
New course