In 2006, NEMO began adapting its shelter technology for elite U.S. Special Operations
Forces and launched its Shield™ product line. In the years since, many elite Warfighters
have depended on NEMO tents, shelters, sleeping gear, weapons bags, and other
products to take full advantage of what limited comfort and protection can be found
on the battlefield. NEMO is intensely proud to serve the American Warfighter and
allied partners, and aims to design, engineer, and manufacture the best equipment
solutions possible.
For much of the last decade, NEMO Shield™ has been engaged in research and
development with the U.S. Army Natick Soldier Research, Development, and
Engineering Center and the U.S. Special Operations community. The focus has been
on creating the next generation of cutting edge 1-2 person combat tents, specialized
shelters for the arctic, and shelters for medical applications. Years of collaboration,
testing, evaluation, and fielding of NEMO Shield™ products have culminated in
forward thinking designs that reduce weight and cube, improve concealment,
increase comfort and livability, and maximize operational flexibility and efficiency for
the Warfighter.
The ALCS™ 1P SE and CODA™ 1.5P SE are leading the
industry in materials, technology and innovation while
addressing the current and future needs of our Military and
Government users. We have partnered with the leading
domestic small shelter factory, Diamond Brand, and the
leading fabric manufacturer, W.L. Gore & Associates, to
provide the most advanced Berry Compliant all-weather
combat tents on the market. Coupled with the NEMO
Losi Combat 2P SE tent, these three shelter systems
provide significant improvement over incumbent designs
such as the USMC 2-Man Combat Tent, U.S. Army 3-Man
Lightweight Extreme Weather Shelter, and the U.S. Army
Universal Improved Combat Shelter.
NEMO’s AirSupported Technology® (AST®), a system of lightweight inflatable
ribs with innovative pump technology, provides a high performance alternative
to traditional tent poles. NEMO AST® shelters have remarkable properties that
save time, minimize pack size, and provide remarkable strength. NEMO’s line of
innovative shelters, sleeping pads and accessories continues to evolve as we take
on new challenges and tackle unsolved equipment problems for the Warfighter.
Products like our Cosmo™ series sleeping pads, watertight shoot-through FAS™
bags, and radio signal blocking EMFX™ phone pouches each provide groundbreaking levels of performance in transit, in the field and in action.
shield.nemoequipment.com
COVER: The new Advanced LInking Combat Shelter™ 1P. Photo by William Kramer
1 Person
Combat Tent
Using a recently unveiled, jointly developed, and
totally unique fabric from W.L. Gore & Associates,
NEMO has designed a Berry Compliant, lightweight,
linkable, four-season, free-standing, individual shelter
system that is waterproof/breathable and flame
retardant. Coupled with outstanding signature
protection, ALCS™ 1P SE (Advanced Linking Combat
Shelter™) gives the Warfighter state of the art
performance, technology, and protection from the
elements.
The single wall lightweight design allows for significant weight reduction and
the innovative linking capability provides a “buddy-team” benefit while still
allowing for self-sufficiency in combat environments. Minimal componentry
and an integrated pole design allows for fast erect and strike times regardless
of the conditions.
• USA Made and Berry Compliant.
• Single wall fabric technology offers durable waterproof protection, high breathability, with
significant weight reduction compared to traditional double wall structures.
• GORE-TEX® Shelter Fabric provides outstanding signature protection, meeting or exceeding
military requirements for visual opacity (blackout) and near infrared (nIR) reflection
characteristics as well as superior protection against Image Intensifying detectors used in
night vision goggles.
• GORE-TEX® Shelter Fabric employs GORE® PYRAD™ Flame Retardant, a revolutionary FR
laminate technology that enables compliance to CPAI-84.
• Hub-based pole set for ease of set-up and minimizing components.
• Linking option allows for multiple tents to be linked together in either direction.
• Linking panel pocket integrated into the shelter for storage of the attached link or vestibule.
Optional side vestibule zips into the
linking zipper system to offer room
for gear.
Expansive back vent can be deployed
from inside the shelter to give you
versatile venting options.
• Brow poles add volume for increased space utilization.
• High-to-low ventilation for maximum air circulation.
• Nearly vertical walls maximize sit height and offer extra vestibule volume
• Includes a roll-up style stuff sack for ease of inventory as well as pole repair sleeves, Tear-Aid
patches, and stakes.
Near vertical walls and pole system
design provide excellent sit height for
the Warfighter and length for a sleep
system with gear.
Optional ICC™ is lightweight,
compact, and provides a highly
cost effective solution for
adapting the tent to different
areas of operation.
• Optional ICC™ (Interchangeable Camouflage Cover™) is lightweight, compact, and provides
a highly cost effective solution for adapting the tent to different areas of operation. One
ALCS™ tent with 3 different ICC™ covers presents a higher performance and lower cost
solution than 3 tents in different colors or patterns. The ICC™ also serves to shade the tent and
protect it from UV and abrasion.
ALCS™ 1P SE GORE® USA
39"
UPC # 814041012683
94"
COLOR
Coyote Brown
ALCS™ 1P SE Linked View
35"
34”
Capacity
1
Minimum Weight
6 lbs, 15 oz
Packed Weight
8 lbs, 7 oz
Frame
Anodized Aluminum Poles
Shell Fabric
Mesh/GORE-TEX® w/b Shelter Fabric
Vestibule Fabric
GORE-TEX® w/b Shelter Fabric
Floor Fabric
75D PU Nylon
Interior Height
39 in
Floor Area
23 sq ft
Vestibule Area
0.4 sq ft
Included Accessories
Link™, vestibule, stakes, repair kit, guy-out cord
Optional Accessories
ICC™
Country of Origin
USA (Berry Compliant)
ALCS™ 1P VESTIBULE USA
UPC # 814041012706
ALCS™ 1P ICC™ USA
MultiCam®
UPC # 814041012720
Arctic White
UPC # 814041012713
*ICC available in multiple patterns (based on MOQ)
©2013 NEMO Equipment, Inc. | PATENTS PENDING
1–2 Person Combat Tents
Using many of the same technologies found in the ALCS™ SE shelters,
NEMO designed the Coda™ 1.5P SE in conjunction with Special Operations
Forces to offer a unique set of features ideal for today’s tactical
environments in a size and weight package that allows for fast and light
movements while maintaining a highly tactical signature.
• USA Made and Berry Compliant.
• NEMO and Diamond Brand Partnership.
• Single wall fabric technology offers durable waterproof and wind protection, high
breathability, with significant weight reduction and simplicity compared to traditional
double wall structures.
The unique linking system allows for
Coda™ tents to be linked together
but carried individually.
Two large side and one front
vestibule allow for significant gear
volume and three entry points.
The low profile of Coda™ provides for
an excellent tactical signature.
Three large zippered doors
promote ventilation in warmer
conditions.
• Low profile silhouette for tactical environments.
• Side doors and optional connecting panels allow Coda™ tents to complex together,
facing alternating directions, ideal for security.
• Optional front and side vestibules provide additional gear storage.
• Optional IPF™ (Interchangeable Partial Fly™) is lightweight, compact and provides a
highly cost effective solution for adapting the tent to different areas of operation. One
Coda™ tent with 3 different IPF’s™ presents a higher performance and lower cost solution
than 3 tents in different colors or patterns. The IPF™ also serves to shade the tent and
protect it from UV and abrasion.
Optional IPF™ provides a cost
effective solution for adapting to
different areas of operation.
CODA™ 1.5P SE USA
UPC #814041012201
Capacity
1
Minimum Weight
3 lbs, 14 oz
Packed Weight
5 lbs, 12 oz
Frame
Anodized Aluminum Poles
Shell Fabric
40D PU Nylon
Vestibule Fabric
40D PU Nylon
Floor Fabric
70D PU Nylon
Interior Height
30 in
Floor Area
24 sq ft
Vestibule Area (front and side)
13 sq ft
Included Accessories
(1) front vestibule with pole, (1) side vestibule stuff sack, stakes, guy-out cord, repair kit
Optional Accessories
Extra side vestibule, Coda™ Link™, IPF™
Country of Origin
USA (Berry Compliant)
©2013 NEMO Equipment, Inc. | PATENTS PENDING
91"
30"
43"
124"
CODA™ 1.5P IPF™ USA
MultiCam®
UPC #814041012478
Arctic White
UPC #814041013093
*IPF™ available in multiple patterns (based on MOQ)
2–3 Person Combat Tents
Weighing considerably less than issue combat tents, the Losi™ 2P and 3P
shelters provide increased space, dual access, and ease of set-up thanks to
advanced materials and years of experience in shelter design.
1
2
• USA Made and Berry Compliant option (Losi™ Combat 2P SE USA).
• The symmetrical design provides each Warfighter an identical large vestibule and door
on either side of the shelter, preventing jostling for position when entering and exiting the
shelter and maintaining individual gear storage.
• Continuous sleeves for easy pitching in the dark.
1. Multiple grommets ensure that
the tent can be optimally tensioned
at all humidity levels.
3
• Ridge poles run the long direction on the shelter and terminate above the ground,
providing nearly vertical walls on all sides of the shelter for maximum interior space.
2. Strategic panels of mesh and 30D
fabric allow moisture to vent from the
tent, but block chilly gusts of wind.
• Includes a roll-up style stuff sack for ease of inventory as well as pole repair sleeves, TearAid patches and stakes.
3. Overhead vents in the rain fly
promote good ventilation even in
driving rain.
• The Losi Combat™ 3P SE shares the same design but with additional length and width to
comfortably fit extra gear or an additional Warfighter.
• Despite being much larger, the Losi Combat™ 3P SE manages to weigh a few pounds less
than the standard issue 2 Man Combat Tent.
LOSI COMBAT™ 2P SE USA
UPC # 814041013017
LOSI COMBAT™ 2P SE
UPC # 814041013024
46"
54"
106"
86"
Capacity
2
Minimum Weight
5 lbs, 8 oz
Frame
Anodized Aluminum Poles
Shell Fabric
No-See-Um Mesh / 30D Nylon
Fly Fabric
30D PU Nylon
Floor Fabric
30D PU Nylon
Interior Height
COLOR (Body / Fly)
Coyote / Coyote
46 in
Floor Area
32 sq ft
Vestibule Area
24 sq ft
Included Accessories
Roll-up style stuff sack, gear caddy,
stakes, guy-out cord, repair kit
Country of Origin
USA (Berry Compliant) or Imported
LOSI COMBAT™ 3P SE
91"
79"
Capacity
3
Minimum Weight
Frame
No-See-Um Mesh / 30D Nylon
Fly Fabric
30D PU Nylon
Floor Fabric
30D PU Nylon
Interior Height
48 in
Floor Area
50 sq ft
Vestibule Area
7 lbs, 1 oz
Anodized Aluminum Poles
Shell Fabric
COLOR (Body / Fly)
131"
48"
26 sq ft
Included Accessories
Country of Origin
Roll-up style stuff sack, gear caddy,
stakes, guy-out cord, repair kit
Imported
Coyote / Coyote
UPC #814041013031
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Cot or Ground Shelter
Switchblade™ 1P SE is ideal for training or deployment. It’s a versatile
individual shelter sized to fit on a standard military cot but equally capable
of being used on the ground. With its rain fly, it offers all-season weather
protection. Without the rain fly, it’s an effective cot or ground-based bug net
for protection against insect-borne illness. We built the Switchblade™ 1P SE
to turn the cot into a complete overnight solution whether used outdoors or
indoors.
• Made in the USA and fully Berry Compliant.
• The Switchblade™ 1P SE secures to your cot using the Corner Retention Straps,
which are simple and fast to attach. The straps easily secure out of the way when
not used with a cot.
Includes the necessary stakes and
Secures to your cot using the Corner
guy lines to behave just like any other Retention Straps, which are simple
individual ground shelter, offering
and fast to attach.
versatility to the Warfighter.
• When using the shelter/cot combination for seating, you’ll appreciate the wide
opening door, electronics pocket, and the integrated cup holder pocket located
just inside the entry.
• Place your headlamp in the Light Pocket™ at the inside peak of the shelter with
the light facing towards the inside of the shelter to cast an even light throughout.
• The spacious sit height of the shelter and large volume vestibule offer excellent
“liveability” for the Warfighter.
• The central hub pole structure minimizes components and simplifies set-up
and strike of the shelter.
Place your headlamp in the Light
Pocket™ at the inside peak of the
shelter with the light facing towards
the inside to cast an even light
throughout the shelter.
Corner pockets store a water bottle
and keep personal items close at
hand.
• A strut vent along the top of the fly door opening allows for additional air
circulation when used with the rain fly.
• The roll-up style stuff sack simplifies organization and transport.
• Switchblade™ 1P SE includes the necessary stakes and guy lines to behave just
like any other individual ground shelter.
The roll-up style stuff sack simplifies
organization and transport.
SWITCHBLADE™ 1P SE
Capacity
1
Minimum Weight
Frame
3 lbs, 8 oz
Easton Reverse Combi Anodized Poles
Shell Fabric
40D PU Nylon
Floor Fabric
70D PU Nylon
Interior Height
40 in
Floor Area
17.8 sq ft
Vestibule Area
12.45 sq ft
Included Accessories
Roll-up style stuff sack, stakes,
guy-out cord, repair kit
Country of Origin
USA (Berry Compliant)
40"
84"
31"
30"
Coyote
UPC #814041012218
©2013 NEMO Equipment, Inc. | PATENTS PENDING
AIRBEAM ANATOMY
6. Hypalon® Valve Reinforcement
1. Hook & Loop Panels for Securing
Airbeam Ends Inside Tent Shell
AST® Explained
7. Round Airbeam End with Abrasion
Resistant Base
2. Bladder Access Pockets
NEMO AirSupported Technology® was
developed by NEMO's founder after his work
on spacesuits and inflatable architecture
for NASA. NEMO AST® is a system of lowpressure inflatable tubes (called “airbeams”)
and lightweight pumps that provide a high
performance alternative to traditional tent
poles. Airbeams are made of two layers, like a
bicycle tire. The outer layer provides the shape,
strength, and puncture resistance while the
thin inner polyurethane bladder does the job of
holding air.
8. Protective Cap for Valve
3. Tape Reinforced Triple Zig-Zag
Seam Construction
9. Quick-Disconnect Inflation/
Deflation Valve
4. Hook & Loop Straps for
Attachment Inside Tent Shell
10. Deflation Valve
5. Dimension-Polyant Multi-Laminate
X-PLY® Fabric
11. Replaceable Internal Bladder
NEMOID™ FOOT PUMP
Weighs 3.6 oz and stores flat
12. Welded Construction
13. Dump-Check Valve™
14. Quick-Disconnect Valve
INTEGRATED PUMP
Weighs 2.3 oz and stores flat
Every NEMO AST® tent comes with either the
lightweight 3.6 oz foam-filled, welded fabric
Nemoid™ Foot Pump or the compact 2.3 oz
Integrated Pump. The Integrated Pump is a
clever little device we call a “lung amplifier.”
Basically, you blow into a small welded fabric
pouch and squeeze, repeating this action for
about 10 to 15 seconds until the airbeam is fully
inflated. The squeezing action increases the air
pressure to the 5 to 7 psi needed to make the
airbeam very sturdy.
15. Oral Inflation Valve
16. Welded Construction
5
17. Moisture Release Valve
18. Quick-Disconnect Valve
4
3
2
1
Airbeams have remarkable properties that can
save time, fight high winds, and lighten the
load on your back. They are faster and easier
to set up, and much easier to repair, than
traditional poles. They pack smaller and will fit
in odd-shaped spaces. They are also shockingly
strong. In our Morpho™ SE tents, the airbeams
are more than twice as stiff as traditional
aluminum poles. NEMO AirSupported
Technology® is the first major breakthrough in
small shelter design in years.
10
13
6
14
15
8
18
18
16
17
7
11
1
TANTO 15 Second Setup
1s
3s
7s
12s
15s
MORPHO 45 Second Setup
1s
9s
18s
27s
36s
45s
©2013 NEMO Equipment, Inc. | PATENTS PENDING
1 Person AST® Shelter
The Gogo™ SE is a bivy killer. It is almost 10 feet long, 3 feet wide, 27 inches
tall, takes 15 seconds to set up, has great interior volume, packs to the size of a
military helmet and weighs only 2 lbs. Why carry a traditional bivy?
• AirSupported Technology® allows the Gogo™ SE to be inflated in under 15
seconds using the Integrated Pump and deflated in less than 5 seconds.
• The single wall construction uses NEMO’s OSMO™ waterproof/breathable fabric
to control condensation and keep out rain and snow.
• Gogo™ SE includes a side door for easy exiting around gear.
Gogo™ SE's additional side door
combined with the front door for
maximum accessibility.
The ExoFly™ design allows the inner
tent to retract, creating a 5 sq ft
vestibule.
Inflates in seconds from outside or
inside so you can stay dry when the
weather turns foul.
The size of your helmet, the Gogo™
SE packs small and weighs little.
• Features NEMO’s ExoFly™ in the front nose which allows the fly to be retracted
for air circulation or the inner tent to be retracted to create a temporary 5 sq ft
vestibule.
• The Gogo™ SE is 9.5 ft long and has enough room inside to bring in gear or rest
on your elbows to operate a laptop computer.
NEMO AST® Airbeams are twice as
stiff as traditional aluminum poles.
gogo™ SE
Capacity
1
Minimum Weight
2 lbs, 2 oz
Frame
2 in dia Airbeam
Shell Fabric
40D OSMO™ W/B
Vestibule Fabric
20D PU Nylon
Floor Fabric
30D PU Nylon
Interior Height
27 in
Floor Area
19 sq ft
Temporary Vestibule Area
Included Accessories
5 sq ft
Dry bag style stuff sack, Integrated
Pump, stakes, guy-out cord, repair kit
Country of Origin
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Imported
COLORS
Alpha Green
UPC #814041012928
Coyote
UPC #814041012935
MultiCam®
UPC #814041012942
1 Person AST® Shelter
Derived from our proven Gogo™ AST® platform, but designed specifically for
combat environments in desert, temperate, and mountainous regions, this
AirSupported shelter is lightning fast, ultra compact, discrete, and highly
functional with increased vestibule space.
• AirSupported Technology® allows the Sabre™ SE to be inflated in under 15
seconds using the Integrated Pump and deflated in less than 5 seconds.
• The single wall construction uses NEMO’s new OSMO™ DC waterproof/
breathable fabric with light reduction properties so your headlamp signature is
almost completely eliminated.
Sabre™ SE include a side door for easy Much like the Gogo™ SE, the front
exiting around gear.
vestibule allows the Sabre™ SE to be
used as a sniper hide.
• Ingress and egress is possible through the front or side door.
• Sabre™ SE is 9.5 ft long and have enough room inside to bring in gear or rest on
your elbows to operate a laptop computer.
• The Sabre™ SE is identical in design to the Gogo™ SE, but includes an integral
deployable large front vestibule with 7.3 sq ft of space.
• With everything zipped shut, there are no mesh panels, which greatly aids in
keeping out cold winds, dust, and snow.
The Sabre™ SE has an integrated
strut vent along the top panel for
increased ventilation.
The minimal pack size of the Sabre™
SE allows it to easily fit into a 3-day
assault pack.
SABRE™ SE
Capacity
Minimum Weight
2 in dia Airbeam
Shell Fabric
OSMO™ DC W/B
Vestibule Fabric
20D PU Nylon
Floor Fabric
30D PU Nylon
Floor Area
Vestibule Area
Included Accessories
Country of Origin
27 in
COLORS
Alpha Green
UPC #814041012959
2 lbs, 2 oz
Frame
Interior Height
30"
1
119"
Coyote
UPC #814041012966
MultiCam®
UPC #814041012973
(Not available in OSMO™ DC W/B)
19 sq ft
7.3 sq ft
Dry bag style stuff sack, Integrated
Pump, stakes, guy-out cord, repair kit
Imported
©2013 NEMO Equipment, Inc. | PATENTS PENDING
1 Person AST® Shelter
Individual mesh shelter using NEMO’s unique AirSupported
Technology® for warmer/tropical climates, but with weather
protection options of a fly or tarp allowing the Warfighter
unprecedented flexibility in a highly packable shelter system.
TANTO™ SE
• The Tanto’s Airsupported Technology® and Swallowtail patterning tensions the
mesh above your body, keeping insects at a safe distance.
• AirSupported Technology® allows the Tanto™ SE to be inflated in under 15
seconds using the Integrated Pump and deflated in less than 5 seconds.
• The Tanto™ Rain Tarp is an optional 94 sq ft tarp large enough to fit two 180
degree opposed Tantos™ (with or without the fly) underneath for improved
ventilation and additional operating area.
Black
UPC #892802002555
Alpha Green
UPC #814041012867
24"
27"
41"
2
114"
Capacity
1
Minimum Weight
Frame
1 lb, 5 oz
2 in dia Airbeam
Shell Fabric
No-See-Um Mesh
Floor Fabric
30D PU Nylon
Interior Height
27 in
Floor Area
19 sq ft
Vestibule Area
N/A
Included Accessories
Dry bag style stuff sack, Integrated
Pump, stakes, guy-out cord, repair kit
Country of Origin
Imported
TANTO™ rain TARP SE
TANTO™ RAIN FLY SE
COLORS
COLORS
Alpha Green
UPC #814041012881
Alpha Green
UPC #814041012904
Coyote (based on MOQ)
UPC #814041012898
MultiCam® (based on MOQ)
UPC #814041012911
MultiCam® (based on MOQ)
UPC #892802002593
Minimum Weight
24"
65"
114"
Minimum Weight
1.0 lbs
Vestibule Area
19 sq ft
Fly Fabric
104"
30D PU Nylon
Country of Origin
Tarp Area
94 sq ft
Tarp Fabric
30D PU Nylon
Country of Origin
Imported
1 lb, 3 oz
Imported
156"
Tanto™ Rain Fly provides additional storage
within arm's reach.
The ExoFly™ retractable inner tent allows
you to add a temporary 5 sq ft vestibule.
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Swallowtail patterning gives you the option
of adding a stick or collapsible pole to prop
up the foot end inner tent with the rain fly.
Tanto’s™ small packed size leaves room for
essential gear in your ruck.
2 Person AST® Shelter
NEMO’s unique AirSupported Technology® in a 2 person all-weather
shelter system designed for fast packing, ease of setup, repairability, and
performance in the varied climates faced by the Warfighter.
1
2
• Without rigid poles to pack, the Morpho™ 2P SE packs up smaller than
equivalent shelters while providing the superior field repairability that limits
rigid pole designs.
• The airbeams are 3.5” in diameter and, when fully inflated with the included
Nemoid™ foot pump, are more than twice as rigid as standard aluminum poles.
• AirSupported Technology® allows the Morpho™ 2P SE to be erected in under
one minute and striking the shelter can be done in less than 20 seconds.
1. ExoFly™ retractable vestibule
provides extra floorless storage
space.
3
2. The Boot Cut™ on Morpho™ 2P SE
gives two pairs of boots a dry home
for the night.
• The size to weight ration of the Morpho™ is impressive, with 9 ft of length
inside and 40 sq ft of floor area at 5 lbs of weight.
3. Rear scoop vent aids air circulation.
• Climate control is no problem with the full canopy of high performance
OSMO™ Waterproof/Breathable fabric, ExoFly™ Retractable Vestibule, and vents
throughout.
morpho™ 2P SE
Capacity
Minimum Weight
Frame
Shell Fabric
2
5 lbs, 5 oz
3.5 in dia Airbeams
Vestibule Fabric
30D PU Nylon
Floor Fabric
30D PU Nylon
Interior Height
42 in
Floor Area
39 sq ft
Temporary Vestibule Area
14 sq ft
Included Accessories Dry bag style stuff sack, Nemoid™ Foot
Pump, stakes, guy-out cord, repair kit
Country of Origin
42"
40D OSMO™ W/B
104"
64"
COLORS
Alpha Green
UPC #814041012980
Coyote (based on MOQ)
UPC #814041012997
Imported
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Hexalite™ SE 6P is an ideal shelter for units in need of large protected
space. Whether used as a sunshade for a team looking for sun protection,
a rain shelter for village stability operations, or a logistic node, Hexalite™
6P SE is a versatile and roomy shelter. The standing height and cavernous
interior combined with the open floor allows easy access without
worrying about dirt or taking off boots. Setup is easy using the two
included adjustable height tarp poles. Depending on whether vestibule
space is used, Hexalite™ 6P SE sleeps 6-10 people, and an optional
Footprint is available when protected ground is needed.
Reinforced hoops keep the upper
vents open, allowing low-to-high
ventilation.
Volumizing vents can be guyed
out to expose mesh panels and
significantly increase interior space.
Air flow can be regulated by opening
the internally adjustable overhead
vents.
Fixed-length webbing aids setup.
HEXALITE™ 6P SE
60"
©2013 NEMO Equipment, Inc. | PATENTS PENDING
6 - 10
Minimum Weight
8 lbs, 5 oz / 3.7 kg
Frame
2 DAC Adjustable Tarp Poles
Shell Fabric
30D PU Nylon
Interior Height
89 in / 226 cm
Interior Area
207 sq ft / 19.2 sq m
Included Accessories Dry bag style stuff sack, 2 adjustable tarp
poles, stakes, guy-out cord, repair kit
Optional Accessories Footprint
COLOR
89"
221"
Capacity
185"
MultiCam®
UPC #814041013000
The Bugout™ SE is a new category of shelters. This simple shelter consists
of a well designed tarp with mesh walls that can either be stowed or
easily dropped to offer instant no-see-um protection. String the tarp
between two trees, poles, or vehicles, or use NEMO's adjustable height
poles to create an escape from rain, bugs, or sun whether you are at
the FOB or out in a remote village. A specially developed mesh protects
against side blown rain and effortlessly sheds moisture when it's time to
pack up. Adjustable height, multiple configurations, and Footprint option
make this unique shelter a multifunctional tool for your quiver.
Mesh sides can be rolled up and
secured out of the way.
Attach corners with cord to trekking
poles or nearby trees.
Multiple stake points at each corner
allow you to adjust the shelter height.
Use a hammock with the Bugout™
SE to create a bug-proof, ultralight
shelter.
BUGOUT™ SE
Capacity 4
Minimum Weight4 lbs, 1 oz / 1.9 kg
9'
6'
Wall FabricNo-see-um Mesh
9'
Tarp Fabric75D PU Polyester
Interior Height 72 in / 183 cm
Floor Area 81 sq ft / 7.5 sq m
Included Accessories Drawstring stuff sack, stakes, guy-out cord, repair kit
COLOR
MultiCam®
UPC #814041013048
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Special Purpose Tent
The Tenshi™ 2P SE is the two person alternative to the Moki™ 3P SE, giving
the Warfighter Alpine capability in a nearly indestructible 2 person shelter.
• The Tenshi™ includes many specialized features for cold weather survival to
include a Condensation Curtain™ to isolate frost.
• The single wall construction uses NEMO’s new OSMO™ DC waterproof/
breathable fabric with light reduction properties so your headlamp signature is
almost completely eliminated.
• Beefed up guy points, reinforced pole pockets, and DAC Featherlite® poles
make Tenshi™ all but indestructible.
Overhead vents allow for air
circulation. Pressure Porting™ on
the largest two overhead vents
helps reduce forces on the seams
during high winds.
Sleep Tight Anchor Transfer™ (STAT™)
provides a waterproof, convenient,
and direct method of transferring an
anchor into the tent when pitched on
narrow ledges or other high exposure
areas.
Condensation Curtain™ isolates
respiration to a small portion
of the tent, controlling frost
build-up.
The rear window promotes air
circulation and doubles as an
escape hatch.
• The rear window promotes air circulation and doubles as an escape hatch.
• Recipient of several awards, including “Editors Choice” from Climbing, “Best In
Gear” from Rock and Ice, and “Editors Choice” from Backcountry, Tenshi™ is the
clear choice for high-altitude environments.
tenshi™ 2P SE
Capacity
2
Minimum Weight
Frame
Shell Fabric
4 lbs, 6 oz
Anodized Aluminum Poles
OSMO™ DC W/B
Vestibule Fabric
30D PU Nylon
Floor Fabric
70D PU Nylon
Interior Height
Alpha Green
UPC #814041013062
42 in
Floor Area
28 sq ft
Vestibule Area
11 sq ft
Included Accessories
COLOR
Roll-up style stuff sack, vestibule,
Condensation Curtain™, stakes,
guy-out cord, repair kit
Country of Origin
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Imported
42"
86"
47"
Special Purpose Tent
Designed with special features for cold weather survival, the Moki™ 3P SE
is the shelter of choice for four-season use in difficult tactical conditions.
• The single wall construction uses NEMO’s new OSMO™ DC waterproof/
breathable fabric with light reduction properties so your headlamp signature is
almost completely eliminated.
• A large vestibule is included with the Moki™ and an optional vestibule can be
zipped to the opposite door for extra storage.
• Roughly half of Moki’s™ single-wall exterior is convertible to mesh, which
provides comfort and flexibility in any environment.
Moki™ 3P SE tents can be linked
using vertical zippers in the
vestibules.
Moki™ 3P SE side doors double as
vents for true four-season versatility.
• Zip two Moki™ shelters together with the included connector panel.
• An optional Link™ enhances the living space between two Moki™ shelters.
Moki™ Link™ enhances the living
space between two Moki™ tents. Use
it as a communal space, alternate
entrance, or covered storage for wet
gear.
moki™ 3P SE
Capacity
Minimum Weight
Frame
Shell Fabric
3
8 lbs, 7 oz
Anodized Aluminum Poles
OSMO™ DC W/B
Vestibule Fabric
30D PU Nylon
Floor Fabric
70D PU Nylon
Interior Height
Floor Area
Vestibule Area
48 in
43 sq ft
12 sq ft each
Included Accessories
Modular stuff sack w/ separate pole
bag, vestibule, Connector Panel, stakes,
guy-out cord, repair kit
Optional Accessories
Link™, APRI™, extra Moki™ vestibule
Country of Origin
48"
90"
75"
COLOR
Alpha Green
UPC #814041013079
Imported
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Special Purpose Tent
The ISOPOD™ series of tents are the culmination of NEMO’s experience
designing for extreme conditions, demonstrating capabilities to withstand
extreme arctic winds, snow loads, and UV using the most advanced
materials and engineering available.
• The fabrics of Isopod™ SE are custom designed for additional UV and abrasion
resistance, and the unique pole configuration has been computer-optimized to
withstand extreme arctic winds, resisting pole breakage while allowing flex.
• The removable inner canopy is composed largely of our APRI™ (Air Permeable
Reflective Insulation™), a metallic fabric that considerably increases interior
warmth.
Isopod™ poles originate from
a single point, allowing the
structure to bend during high
winds instead of breaking.
Internally deployable vents
allow you to completely control
ventilation.
The inner tent, made of APRI™
metallized fabric, reflects body
heat and warms the tent interior.
Engineered snowskirt fabric is
made from 200D nylon crossreinforced with Dyneema ripstop
threads and laminated with a
UV-resistant film.
• A large snowskirt, or valence, around the perimeter can be covered with snow
or extra equipment to help seal out wind and weather.
• Over 40 guy-out points and 10 primary ground anchors lock Isopod™ to the
ground.
• Numerous internally deployable vents and mesh pockets, including specialized
radio pockets, help keep the roomy interior organized and comfortable no
matter what the conditions outside.
isopod™ 100 SE
Capacity
4
Minimum Weight
Frame
28 lbs, 5 oz
8 DAC 13.2 / 16.8 mm Pressfit
Shell Fabric
Fly Fabric
AVAILABLE FALL 2013
OSMO™ EC
Floor Fabric
An extreme conditions 15-man Arctic tent engineered for
the environmental conditions faced by our Warfighters at
altitude.
210D PU Nylon
Interior Height
52 in
Floor Area
79 sq ft
Vestibule Area
Included Accessories
isopod™ 300X SE
No-See-Um Mesh / APRI™
N/A
Duffel stuff sack w/ pole bag
compartment, Sentinel™ Sand/Snow
Anchors, guy-out cord, repair kit
Country of Origin
USA or Imported
82"
52"
150"
97"
COLOR
Coyote
UPC # 814041013109
©2013 NEMO Equipment, Inc. | PATENTS PENDING
256"
180"
The Tuo™ series sleeping pads offer independent layers of
air-filled comfort, lightweight insulating performance, and
redundant protection in the case of puncture in the field.
• A thin airtight membrane within each Tuo™ SE pad creates two separate
inflatable layers, each with its own valve.
• The base layer can be inflated firm for protection against rocks and the top
layer inflated according to comfort needs.
• The two layers give complete redundancy in the event of a puncture as well as
insulation in colder climates.
tuo™ luxury SE
UPC #814041010535
Weight
3 lbs, 12 oz
Area
Min Temp Zone
-25 to -15F
Pack Size
13.2 sq ft
12.5 × 7 in dia
Width
25 in
Fabric
Length
76 in
Country of Origin
Thickness
2.3 in
75D Polyester
Imported (Trade Compliant)
Stone
25"
76"
tuo™ standard SE
UPC #814041010528
Weight
Min Temp Zone
2 lbs, 4 oz
-5 to 5F
Area
9 sq ft
Pack Size
9.5 × 6 in dia
Width
20 in
Fabric
Length
72 in
Country of Origin
Thickness
1.6 in
75D Polyester
Imported (Trade Compliant)
Stone
20"
72"
Two independently inflated foam layers
maximize comfort and add redundancy.
Tuo™ SE pads pack small.
Top layer of foam is cross drilled to reduce
weight and packed size.
Easy inflate/deflate valves make setup fast.
fillo™ se
UPC #814041012874
The Fillo™ offers inflatable cell baffle technology combined
with one-inch thick memory foam for a perfect balance of
cushioning, adjustable height, and luxurious comfort.
• Baffled air cell for stability and loft, one inch of memory foam for comfort, and
a removable washable cover made of ultra-soft microsuede.
• A grid of shock cord under Fillo™ SE holds extra clothing in place for additional
sleep height and head support.
• Fillo™ packs down small into an integrated drawstring stuff sack.
Minimum Weight
Width
11 oz
10.5 in
Area
178 sq in
Pack Size
6 in × 4 in diameter
Length
17 in
Pillow Top Fabric Washable Polyester Microsuede
Thickness
4+ in
Country of Origin
Coyote
Imported (Trade Compliant)
4"
4+"
10.5"
17"
©2013 NEMO Equipment, Inc. | PATENTS PENDING
The Cosmo™ SE modular sleep system offers comfort and
versatility well beyond other pads on the market today.
Cosmo™ uses advanced materials to deliver a lightweight
yet incredibly comfortable sleep system, whether you are
racked out on a long C-17 flight or bedded down at the FOB.
• The system includes an inflatable air pad called Cosmo™ Air and an ultrasoft washable microsuede cover with removable foam layer called Cosmo™
Pillowtop™ SE.
cosmo™ air SE & pillowtop™ SE combo
• Integrated high-speed foot pump for rapid set-up in less than 30 seconds.
• Despite weighing less than 2 lbs, your body is supported by a plush 3” air pad,
with lateral I-beam baffles for a smooth and stable sleeping surface.
UPC #814041012850
COSMO™ PILLOWTOP™ SE
COSMO™ AIR SE
cosmo™ air SE
UPC #814041012843
Weight
1 lb, 13 oz
Min Temp Zone
30 to 40F
Width
Length
Weight
2 lbs, 2 oz
Min Temp Zone
5 to 15F
25 in
Width
25 in
76 in
Length
76 in
Thickness
1 in
Thickness
3 in
Area
13 sq ft
Packed Size
9 x 4.5 in diameter
Fabric
75D Polyester
Country of Origin
Imported (Trade Compliant)
Stone
Area
13 sq ft
Packed Size
Fabric
Country of Origin
25"
11.5 x 7.5 in diameter
Washable Polyester Microsuede
Imported (Trade Compliant)
Coyote
25"
76"
76"
The Cosmo™ Insulated SE uses the same remarkable inflatable technology of the
Cosmo™ Air SE but has an added layer of PrimaLoft® insulation for consistent and
even insulation.
cosmo™ insulated SE
UPC #814041011525
COSMO™ INSULATED SE
Weight
2 lbs, 2 oz
Min Temp Zone
10 to 20F
Width
25 in
Length
76 in
Thickness
3 in
Area
13 sq ft
Packed Size
9 x 6.5 in diameter
Fabric
75D Polyester
InsulationPrimaLoft®
Country of Origin
Stone
Imported (Trade Compliant)
25"
76"
With 3 inches of air and a half inch of
memory foam, the Pillowtop™ SE combo is
the most comfortable pad on the market.
Cosmo™ Air SE offers a lot of comfort in a
small package.
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Cosmo™ Insulated has a layer of PrimaLoft®
insulation for consistent and even
insulation.
An integrated foot pump for fast inflation.
The FAS™ (Full-Action, Sealed™) line of semi-disposable watertight weapons
bags are designed to protect a weapon from saltwater, sand, and other
contaminants while still allowing normal intuitive operation of the weapon.
• The FAS™ bags are available in two versions: the FAS™ Swim and FAS™ Jump
and are currently available for M4/HK416/SCAR series and MP7.
• The FAS™ Swim is made of a high-strength, flexible polymer film and is
designed for low impact operations where protection from salt water, dust and
contaminants is critical.
• The FAS™ Jump is designed for high-impact operations and is ruggedized to
handle a greater threat of abrasion and puncture.
NEMO continues to develop FAS™ Bags in support
of many weapon systems. Please contact NEMO
if you require a FAS™ bag for other individual and
crew served weapons (M240, M249, M2, etc.)
• When the weapon is sealed inside the bag and grabbed normally, the bag
material stretches and gathers to create extra space around the trigger and
ejector port, thus allowing for the immediate operation of the weapon.
• The Swim bag weighs 8-10 oz. with the included Hypalon® shoulder strap and
packs small enough to fit in a uniform pant cargo pocket.
• The Jump bag weighs a few ounces more and packs only 25% larger.
FAS™ sWIM
FAS™ JUMP USA
FAS™ SWIM SUB SE UPC #814041010344
FAS™ SWIM AR SE UPC #814041010351
Country of Origin
Country of Origin
USA (Berry Compliant)
Imported (Trade Compliant)
FAS™ SWIM SUB SE
Weight: 7.0 oz w/o strap; 8.6 oz w/ strap
Packed size: 2.5" wide × 7" long
16"
FAS™ JUMP AR SE UPC #814041011495
19"
40"
FAS™ JUMP AR SE
FAS™ SWIM AR SE
Weight: 1 lb, 5 oz w/o strap; 1 lb, 7 oz w/ strap
Packed size: 2.5" wide × 9" long
Weight: 8.4 oz w/o strap; 10 oz w/ strap
Packed size: 2.5" wide × 9" long
18"
22"
23"
18"
51"
51"
FAS™ SWIM
Straps are designed to hold the weapon
securely while allowing its quick removal.
Dry bag style closures seal out saltwater,
sand, and other contaminants.
FAS™ JUMP
Strong and stretchy polymer film allows
ambidextrous trigger/safety operation.
Stretch trigger/safety panels are covered by
high-abrasion protective pockets.
©2013 NEMO Equipment, Inc. | PATENTS PENDING
The Litter Bivy™ SE is a specialized shelter designed
specifically for basket type litters to protect a wounded
Warfighter from rotor wash, rain, snow and wind blow dust/
debris during transport without restricting access to the
casualty.
• A zipper around the circumference of the biy allows the entire top to be quickly
removed for fast loading and unloading of the casualty.
• Eight zippered panels with transparent windows allow easy access and
monitoring of the casualty.
• Overlapping Velcro® panels along the length of both sides allow for belts and
other methods of securing the casualty to the litter frame without compromising
weather protection.
• Triangular panels along the roof can be rolled to expose high visibility orange
panels.
• The Litter Bivy™ SE packs small and stows on the side of the litter for quick access.
LITTER BIVY™ SE
UPC # 814041010665
Capacity
1
Minimum Weight
Frame
Shell Fabric
5 lbs, 0 oz
Delrin Poles
70D PU Nylon
Interior Height
17 in
Country of Origin
Imported
Desert Tan
(Based on MOQ)
Eight zippered windows on all sides of
the shelter allow complete access to the
casualty.
An innovative pole system allows the
canopy to be attached after the casualty is
placed inside.
Belts can pass through shelter anywhere
along the sides.
The tub bottom half stays in place at all
times while the canopy can be quickly
installed or removed.
medical BIVY™ SE
COMING FALL 2013
©2013 NEMO Equipment, Inc. | PATENTS PENDING
The Helio™ Pressure Shower SE provides an innovative way to employ
pressurized water in a free-standing, rugged, portable package for the
many needs of the Warfighter. With Helio™ SE, daily showers, gear cleanup, and basic field sanitation is simple and quick.
• The Helio™ SE comes in a small, neatly nested kit, weighs less than a liter of
water, and provides 5 to 7 minutes of steady and satisfying water pressure.
• Unlike conventional gravity-fed, hanging shower systems, the Helio™ SE system
uses an 11 liter welded fabric water tank pressurized by a foot pump.
• To use the system, you simply fill up the water tank, let it warm in the sun,
set the tank on the ground, then step on the foot pump a few times. Pumping
occasionally while showering maintains the water pressure.
helio™ pressure shower SE
UPC # 814041012539
8.5"
17"
5.5"
Packed
In Use
Volume
2.9 gal / 11 L
Weight
22 oz [pump, tank, hose, head]
25 oz [with stuff sack]
Packed Weight
Packed Dimensions
5.5 x 8.5 in dia
17 x 8.5 in dia
Hose Length
Fabrics
7 ft
PU coated polyetester, TPU, neoprene tubing
Country of Origin
Imported (Trade Compliant)
8.5"
17"
5.5"
Packed
System components include an 11 liter
tank, hose with spray nozzle, pump, and
carrying case.
In Use
Safety strap over fill port prevents the tank
from accidental opening during operation.
Easy to use foot pump can’t over-inflate and
provides up to 10 PSI of water pressure.
Helio™ components stow neatly in a rugged, ventilated carrying case.
©2013 NEMO Equipment, Inc. | PATENTS PENDING
Available in different sizes, the EMFX-47™ pouches block all radio signals to
and from your cellular phone using a specialized conductive textile lining.
When used properly, EMFX-47™ can prevent your cell phone transmissions
from being maliciously intercepted or used to track your location.
• Placing your cell phone in the EMFX™ pouch, whether it is on or off, provides an
insurance policy that your phone’s radio transmitting and receiving functions are
disabled while still keeping your phone accessible and ready to use.
• Aside from cloaking your cell phone, the EMFX™ pouch will also prevent your
phone’s signal from interfering with other nearby sensitive electronic devices.
• EMFX™ pouches have a roll-top closure and a multi-direction belt loop system.
Specialized conductive textile
inside EMFX™ pouch blocks
radio signal.
Large enough to accommodate
smart phones.
Tough Hypalon® belt loop
system provides many carrying
options.
EMFX-47™ POUCH SMALL
UP TO IPHONE SIZED
5.25"
5.5"
UPC #814041011297
EMFX-47™ POUCH MEDIUM
Devices up to 4.5 X 5.25 In.
UPC #814041013161
4.5"
4"
Minimum Weight
1.1 oz
Shell Fabric
Country of Origin
COLOR
210D Nylon Ripstop
Black
Imported (Trade Compliant)
NEMO Wallets keep your cards and cash secure when you’re on the
move. With a uniquely designed Velcro® flap closure that wraps
around both long sides of the wallet, contents stay put.
Two flaps, secured by Velcro®,
keep contents secure.
Inside features include a pocket
with a clear window, ideal for
housing an ID card.
nemo wallet
Minimum Weight
1.5 oz
Country of Origin
Imported
3.5"
4.2"
©2013 NEMO Equipment, Inc. | PATENTS PENDING
COLORS*
Black
UPC #814041010467
MultiCam®
UPC #814041013154
*other assorted colors
(please call for availability)
Purchasing NEMO Shield™ Edition
NEMO Shield™ Edition Products are designed for military and law enforcement personnel.
Standard colors are Coyote Brown, Alpha Green, and Multicam®. Depending on product, some
standard colors must meet MOQ. Other solid colors and certain camouflage patterns may
be an option depending on availability and order quantity, but may increase cost and lead
time. Manufacturing is typically overseas, but all NEMO tent models can be produced with our
domestic factory to meet Federal requirements. All NEMO products are designed and tested in
Dover, NH, USA and sewn in the best factories in the world. NEMO is a Registered Trademark of
NEMO Equipment, Inc. ©2013 NEMO Equipment, Inc. Patents Pending.
For the best pricing, please contact:
ADS, Inc.
Located in Virginia Beach, VA
800.948.9433 | www.adstactical.com
For product questions or direct ordering, please contact:
UBER GROUP, LLC
www.ubergroup.net
David Kramer, Government Sales
david@ubergroup.net
Mike Sullivan
Vice President, NEMO Shield™
Chief Product Developer
603.236.7687 | mike@nemoequipment.com
For European orders, please contact:
Willem Gussenhoven
European Sales Coordinator
(+45) 61 710 800 | nemo@outsider.dk
NEMO Equipment, Inc.
383 Central Avenue, Suite 400 | Dover, NH 03820
1.800.997.9301 | shield.nemoequipment.com
©2013 NEMO Equipment