EASTERN MARBLE & GRANITE SUPPLY, INC.
CHEMICAL
Cleaners
Honing Powder
Polishing Compounds and Powders
Sealers
Stain Removers
Strippers
Topical Finish
GLUES, ADHESIVES AND
PATCHING MATERIAL
Acrylic
Chip and Fill Kits (Marble)
Coloring Kit
Epoxy
Hardners
Marking Pencils
Polyesters
Razor Blades
Setting Materials
Shellac Fill Sticks
Shims
Solvent
Travertine Fill
Wax Crayons
MARBLE AND GRANITE
POLISHING MEDIUMS
Cotton Pads
Edge Polishing Bars
Felt
Granite Polishing Heads
Lead and Felt
Natural Fiber Pads
Nylon Pads
Pamir (Black & White available)
Granite Honing System
ABRASIVES
Accessories (Backing Pads)
Cassani Stones
Convex Diamond Discs
Diamond Discs (Wet and Dry)
Diamond Hand Pads
Dressing Stones and Cutters
Drum and Sanding Belts
Frankfurt Stones
Radial Arm Polishing Discs
Sandpaper Polishing Wheels (discs)
Screens
Silicon Carbide Belts
Silicon Carbide Discs
Silicon Carbide Grinding Wheels
www.easternmarble.com
QUICK
FINDER
DIAMOND BLADES
Brazed
Ceramic
Concrete
Continuous Rim
Contour
Granite
Marble
Masonry (Brick, Block, Paver)
Porcelain
Rodding
Segmented
Silent Core
Slotting
Tile
Tuck Point
Turbo
Worm Drive
DIAMOND SHAPING BITS
AND PROFILE WHEELS
Accessories (Snail Lock Adaptor)
Cup
Diamond Rollers
Profile (Sintered and Brazed)
Segmented and Brazed
Shaping
Sink
Sink Undermounts
Zero Tolerance Cutters
DIAMOND CORE BITS
AND HOLE SAWS
Adaptors
Anchor
Architectural
Blunt Nose
Brazed
CNC Router Bits
Core Bits (male and female)
Planing
Router (Segmented and Continuous)
Segmented and Continuous
Straight Cutting
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
3
GUIDE
EASTERN MARBLE & GRANITE SUPPLY, INC.
HAND TOOLS
Accessories (Plastic Connections and Tubing)
Angle Grinder (Electric and Air)
Drill and Drill Press
Dry Polisher
Edgecrafter
Flaming Tool
Milling Tools
Plunge Router
Portable Routers
Routers
Straight Grinder
Tread Milling Machine
Tuck Point Machine
HANDLING EQUIPMENT
A-Frames
Carts
Clamps
Slab Dolly
Slab Lifters
Slab Racks
Slab Trolly
Straps
Suction Cups
Telescopic Boom
QUICK
FINDER
EQUIPMENT
Bridge Saws
Dust Collectors
Edge Polishing Machine
Radial Arm Polisher
Sludge Collectors
Straight Line Edger
Tile and Slab Line Machine
SAFETY EQUIPMENT
Aprons
Dust Masks
Ear Plugs
Glasses and Goggles
Hearing Protection
Portable Heaters
Respirators
FLOOR RESTORATION
Delipping Plate
Walk Behind Equipment
Floor Brushes
Floor Discs
Granite Floor Machine
Marble Floor Machine
Polishing Pads
Polishing Powders and Compounds
Supplies and Equipment
Wet Dry Vacs
SAWS
Accessories
Brick, Block, Paver
Mini Bridge
Rail
Tile
Worm Drive
MASONRY AND SCULPTURING
Chisels, Rasps and Hammers
Masonry Saws
Mixing Equipment
SplitTailer
StrapMaster
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
4
GUIDE
CLEANERS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Italian Craftsman Po l i s h
Liquid Marble Cleaner
• Special formulation for marble and granite.
• Cleans and polishes in one step.
• Best product for maintenance, preservation and protection of
countertops and vanities.
• Renews polished surface.
• Protects against fruit juice, alcohol and other staining liquids.
Stand Off® Liquid Marble Cleaner is a non-acidic, blue-colored gel
manufactured for the commercial cleaning, restoration and
maintenance of polished stonework or glazed masonry. Stand Off®
Liquid Marble Cleaner loosens and solubilizes surface dirt, carbon
buildup and other atmospheric stains, allowing them to be washed
away with a simple water rinse. Stand Off® Liquid Marble Cleaner
will not affect polished or glazed masonry surfaces. It may dull or
remove waxes or other applied finishes. Not intended for use on
black marble.
ITEM
DESCRIPTION
ICMP BOT
ICMP CASE
ICMP 1 GAL
ICMP GAL CS
16 oz. Bottle . . . . . . . . . . . .$9.95
16 oz. Bottles 24/Case . . .$118.80
1 Gallon . . . . . . . . . . . . . . .$30.00
4 Gallons/Case . . . . . . . . .$120.00
PRICE
Italian Craftsman Stone Cleaner
• Removes stubborn stains, soap scum, hard water stains, rust and
mineral deposits from marble, granite and other polished or honed
natural stones.
ITEM
DESCRIPTION
ICSCC
Quart . . . . . . . . . . . . . . . . .$18.00
Case of 12 . . . . . . . . . . . .$216.00
Gallon . . . . . . . . . . . . . . . .$42.25
ICSCC GAL
PRICE
ITEM
DESCRIPTION
PRICE
LMC GAL
1 Gallon . . . . . . . . . . . . . . . . . . .$31.00
Klenz All™
Heavy duty stone, tile and grout cleaner. Highly concentrated alkaline
cleaner and degreaser for natural stone, ceramic tile and grout.
• Fast acting • Fresh Scent • Non-Abrasive • Easy to Use • Will not etch
• Deep cleaning action • Available in concentrate
• Available in Ready-to-use-Sprayer
ITEM
DESCRIPTION
KLENZ ALL 24OZ
KLENZ ALL QT
KLENZ ALL GAL
24 oz. Sprayer . . . . . . .$9.98
Quart . . . . . . . . . . . . .$10.98
Gallon . . . . . . . . . . . .$29.95
PRICE
Italian Craftsman Stone Maintainer
• A neutral pH cleaner for daily use on natural stone surfaces.
• Will not harm or mar any natural stone surface.
• Simply spray on and wipe off.
Italian Craftsman Renew
ITEM
DESCRIPTION
PRICE
ICSMM
Quart . . . . . . . . . . . . . . . . .$16.00
Case of 12 . . . . . . . . . . . .$192.00
A safe and effective ready to use antibacterial tile and stone cleaner
with protector for most natural stone, granite, ceramic tile and grout.
Great for counter tops. Cuts grease. Needs no rinse and is non-toxic.
Cleans, protects and kills germs.
ITEM
DESCRIPTION
ICR OZ
Quart . . . . . . . . . . . . . . . . .$20.00
Heavy Duty Detergent
Stand Off® Heavy Duty Detergent is a concentrated formula designed
for cleaning heavily stained masonry surfaces and maintenance of
surfaces protected with Stand Off® Tile and Masonry Protector,
Concrete Protector or Penetrating Sealer for Granite.
This non-acidic detergent is ideal for interior or
exterior applications when removing heavy stains
or soiling.
ITEM
DESCRIPTION
HDD QT
HDD GAL
Quart . . . . . . . . . . . . . . . . .$14.00
Gallon . . . . . . . . . . . . . . . .$45.00
www.easternmarble.com
PRICE
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
5
PRICE
CLEANERS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Revitalizer™
Restore™
Tile and Stone Cleaner with Protector.
Safe and effective neutral pH concentrated daily cleaner with protector
for most natural stone, ceramic tile and grout.
• Easy to use. • No rinse. • Cuts grease • Non-toxic • Neutral pH.
• Antibacterial • Kills household germs. • Great for countertops.
• Cleans and protects. • Fresh citrus scent. • Available in concentrate.
• Available in ready-to-use sprayer.
Heavy Duty Ceramic Tile and Grout Cleaner.
Highly concentrated acidic cleaner and etching solution that restores
ceramic tile and grout and can be used as an etching material for
masonry, polished marble, limestone and travertine.
• Removes soap scum and grout haze.
• No hazardous vapors.
• Safe and biodegradable.
• Use on porcelain and glass.
• Removes hard water deposits and efflorescence.
• Available in concentrate and ready-to-use sprayer.
ITEM
DESCRIPTION
PRICE
REVITALIZER 24 . . . . . . . . . . . . . . . . . . . .$10.00
REVITALIZER GAL . . . . . . . . . . . . . . . . . .$35.00
Italian Craftsman Grout Haze Remover
ITEM
DESCRIPTION
RESTORE QT
RESTORE GAL
RESTORE 24OZ
Quart . . . . . . . . . . . . .$10.00
Gallon . . . . . . . . . . . .$30.00
24 Oz . . . . . . . . . . . . .$9.00
PRICE
Not to be used on polished stone.
Formulated to remove rust from terrazzo, unpolished travertine,
unglazed and unpolished stone, unglazed ceramic, brick, stucco,
granite, limestone, terra cotta and concrete.
ITEM
DESCRIPTION
ICGHR
Quart . . . . . . . . . . . . . . . . .$18.50
PRICE
Enhance Matte
Solid Surface Cleaner/Polish
A one step cleaner and polish for matte finished solid surface material.
Ideal for counter tops. Deep cleans and protects against rings and
stains. Polish is easy to use, anti-static and non-abrasive. Also, good
on other Surfaces. (Wood, enamel, porcelain, formica and Plexiglas.)
ITEM
DESCRIPTION
Enhance M
8 oz. 24/Case . . . . . . . . . .$144.00
8 oz. Bottle . . . . . . . . . . . .$12.00
Italian Craftsman Ceramic Tile Cleaner
PRICE
• High foaming trigger spray formula for glazed ceramic tile.
• Removes soap scum, hard water stains, rust and mineral deposits
from ceramic, fiberglass, non-slip tubs and grout.
• Not for use on polished stone or natural stone surfaces.
ITEM
DESCRIPTION
PRICE
ICCTC
Quart . . . . . . . . . . . . . . . . .$18.00
Enhance Gloss
Solid Surface Cleaner/Polish
A one step cleaner and polish for gloss finished solid surface material.
Ideal for counter tops. Deep cleans and protects against rings and
stains. Polish is easy to use, anti-static and non-abrasive. Also, good
on other Surfaces. (Wood, enamel, porcelain, formica and Plexiglas.)
ITEM
DESCRIPTION
Enhance G
8 oz. 24/Case . . . . . . . . . .$144.00
8 oz. Bottle . . . . . . . . . . . .$12.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
6
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC.
S TA I N
REMOVERS/SEALERS
Italian Craftsman Poultice
Extract™
Italian Craftsman Poultice safely restores polished stone to its original
appearance. Italian Craftsman Poultice is an odorless non-acidic
blend of clays and biodegradable detergent in dry form. When properly mixed, it is designed for trowel application over polished marble
and other stone surfaces. Advantages: Thoroughly cleans stone
without danger of etching or bleaching. Safe, odorless and nonacidic material ideal for interior application. Harmless to most flooring materials and adjoining surfaces. Consistency makes for uniform
application. Different solvents can be used for different stains.
Oil Stain Removal Paste.
Superior citrus solvent-based poultice for removing stubborn oilbased stains.
• Easy to use. • No residues. • Effective stain remover.
• Natural citrus solvent. • VOC compliant.
• Safe on food contact surfaces. • Removes deep, stubborn stains.
• Will not discolor natural stone.
ITEM
ITEM
DESCRIPTION
PRICE
Poultice
Poultice Blk
Poultice100
4 lb. container . . . . . . . . . .$21.00
25 lb. container-bulk . . . . . .$2.90/lb.
100 lb. Drum . . . . . . . . . . . .$2.60/lb.
EXTRACT
DESCRIPTION
PRICE
Pints . . . . . . . . . . . . . . . . .$19.95
Italian Craftsman Oil Repellent
Oil and Grease Remover Kit
®
Stand Off Oil and Grease Remover poultice removes deep seated oil
and grease. Oil and Grease Remover is a two-part cleaner composed of a dry clay and liquid additive that are mixed to form a thick,
creamy paste. Properly prepared, Oil and Grease Remover is suitable
for trowel application to stone surfaces. Oil and Grease Remover can
also be used following Stand Off® Graffiti Remover, on graffiti shadows. May remove polish from polished surface.
ITEM
DESCRIPTION
OGRQT
Quart (2 part system) . . . . .$23.95/box
• Forms a protective barrier against water, oil and other contaminates.
• For use on marble and granite.
• Can also be used as a grout sealer.
ITEM
ICOR
DESCRIPTION
PRICE
Quart . . . . . . . . . . . . . . . . .$49.00
Case of 12 . . . . . . . . . . . .$588.00
PRICE
Italian Craftsman Water Based
Sealer Enhancer
• Unique, permanent-type sealer/treatment, for interior and exterior
applications.
Alpha Rust Stain Remover RSR-2000
ITEM
The RSR-2000 is specially formulated to work extremely fast. In most
cases, the RSR-2000 will completely remove a rust stain within 5
minutes. This highly efficient product is a non-hazardous chemical
that is safe and will not harm the environment.
ITEM
DESCRIPTION
RSR-400G
14 oz. tube . . . . . . . . . . . .$67.00
ICWBS
DESCRIPTION
PRICE
Quart . . . . . . . . . . . . . . . . .$24.00
Case of 12 . . . . . . . . . . . .$288.00
PRICE
Italian Craftsman Professional
Stone Sealer
A superior FDA Compliant stain protector for all interior and exterior
stone, tile, grout, marble, limestone, granite, slate, terrazzo and
travertine. This solvent based impregnator sealer is easy to use,
odorless, non-yellowing, deep penetrating and safe for food contact
surfaces.
ITEM
ICPSS GAL
ICPSS QT
DESCRIPTION
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
PRICE
Gallon . . . . . . . . . . . . . . .$125.00
Quart . . . . . . . . . . . . . . . . .$43.00
1-800-643-8818
7
SEALERS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Impregnator Pro ™
SLX100 Water and Oil Repellent
®
Stand Off SLX100 Water Repellent combines water and oil repellency
to prevent staining by water-borne or oily substances and many
types of graffiti. This clear, penetrating “neat” saline offers invisible
protection and low volatility.
The small molecular structure of SLX100 allows for maximum penetration at coverage rates 2 to 4 times that of conventional salines.
Depth of penetration is controlled by the application rate (loading
rate). This makes SLX100 ideal for protecting GFRC and even dense,
color sensitive surfaces.
SLX100 is recommended for use on granite. In addition, SLX100
forms an effective chloride screen that reduces surface erosion and
corrosion of rebar in reinforced concrete caused by water and watercarried salts.
ITEM
DESCRIPTION
Solvent based impregnator/sealer. Superior stain protection for all
interior dense stone, ceramic tile, marble, limestone, granite, grout
slate, terrazzo and travertine.
• Easy to Use • Virtually Odorless • Preserves Natural Look
Maximum Stain Resistance •Inhibits Efflorescence • Contains FDA
Approved Solvent • Deep Penetrating Protection • Effective Water
and Oil Barrier • Interior Use • Non-Yellowing • FDA Approved Solvent
ITEM
IP QT
IP GAL
DESCRIPTION
PRICE
Quart . . . . . . . . . . . . . . . . .$34.00
Gallon . . . . . . . . . . . . . . .$102.50
PRICE
SLX100 QT
Quarts . . . . . . . . . . . . . . . .$39.50
SLX100 GAL Gallons . . . . . . . . . . . . . .$147.25
Bulletproof™
Heavy duty impregnator/sealer is water based. Unique extra strength
stain protection for interior porous natural stone and grout.
• Added Polymers • Deep Penetrating Protection • Adds Acid
Resistance • Effective Water and Oil Repellent • Preserves Natural
Look • Strengthens Grout • Maximum Stain Resistance • Inhibits
Efflorescence • High Solids Formulation
Limestone and Marble Protector
Stand Off ® Limestone & Marble Protector is a clear, penetrating water
and oil repellent suitable for use on interior or exterior limestone and
marble surfaces. Stand-Off Limestone & Marble Protector does not
form a glossy surface film or darken the masonry surface. Treated
surfaces retain their natural color, texture and appearance. They will
not absorb dirt and spills.
Unlike standard water repellents. Limestone & marble Protector is
especially modified to ensure effectiveness on most limestone, marble and other calcareous or neutral pH surfaces. The combination of
siloxane and new chemical technology provides “oleo phobic” (oil
resistant) protection as well as water repellency. It is ideal for longterm protection against food, oil and water stains.
ITEM
DESCRIPTION
LMP QT
LMP GAL
Quarts . . . . . . . . . . . . . . . .$30.40
Gallons . . . . . . . . . . . . . .$109.80
ITEM
BP QT
BP GAL
DESCRIPTION
Quart . . . . . . . . . . . . . . . . .$45.95
Gallon . . . . . . . . . . . . . . .$139.95
PRICE
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
PRICE
1-800-643-8818
8
SEALERS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Enhancer Pro™
Stone Tech Grout Sealer
Solvent Based Color Enhancing Impregnator/Sealer.
Superior solvent based color enhancing impregnator/sealer with superior stain protection for all interior natural stone, marble, granite,
limestone and masonry surfaces.
• Enhances color • Deep penetrating protection. • Fresh citrus scent.
• Effective oil barrier. • Maximum stain resistance. • Interior use.
• Inhibits efflorescence. • Contains FDA compliant solvent.
Prevents tough stains on grout for ceramic and porcelain tile.
Formulated with advanced water-based fluoropolymer stain blocking
technology that makes grout easier to clean. Interior and exterior
use.
ITEM
DESCRIPTION
ITEM
DESCRIPTION
GS QT
GS GAL
Quart . . . . . . . . . . . . . . . . .$14.95
Gallon . . . . . . . . . . . . . . . .$44.95
PRICE
PRICE
ENHANCER PRO GA Gallons . . . . . . . . . . . . . .$182.95
ENHANCER PRO QT Quarts . . . . . . . . . . . . . . . .$55.95
Stone Tech Grout Release
A water-based silicone solution with excellent grout release and water
repellent properties for manufactured and natural tile, brick, concrete
pavers, saltillo tile, terra cotta, limestone, sandstone, clay and
stucco. Interior and exterior use.
Stone Tech Stone Enhancer and
Water Base Sealer
A superior water-based color enhancing impregnator sealer with stain
protection for all interior and exterior natural stone, tile, marble,
granite, limestone and other masonry surfaces. Maximum stain
resistance.
ITEM
DESCRIPTION
SE QT
SE GAL
Quart . . . . . . . . . . . . . . . . .$28.50
Gallon . . . . . . . . . . . . . . . .$87.95
ITEM
DESCRIPTION
PRICE
GR GAL
Gallon . . . . . . . . . . . . . . . .$24.00
PRICE
Italian Craftsman Topical Stone Sealer
• Solvent based topical sealer for interior and exterior applications.
• Contains an acrylic resin that produces a durable, high gloss finish
and enhanced surface color.
Stone Tech Heavy Duty Stone Sealer
Water Base
Provides heavy duty “natural look” protection for all natural stone
including granite, marble, limestone, travertine, slate, porcelain, and
ceramic tile and grout. Formulated with advanced water-based
fluorochemicals to protect against the toughest oil and water-based
stains.
ITEM
DESCRIPTION
HDSS QT
HDSS GAL
Quart . . . . . . . . . . . . . . . . .$29.95
Gallon . . . . . . . . . . . . . . . .$89.95
ITEM
DESCRIPTION
ICTTS
Quart . . . . . . . . . . . . . . . . .$32.00
Case of 12 . . . . . . . . . . . .$384.00
Not to be used on floors.
PRICE
Stone Tech Water Based Stone Sealer
Provides maximum “natural look” protection for all natural stone
including granite, marble, limestone, travertine, slate, porcelain and
ceramic tile and grout. Formulated with advanced water-based
fluorochemicals to protect against the toughest oil and water based
stains.
ITEM
DESCRIPTION
SS QT
SS GAL
Quart . . . . . . . . . . . . . . . . .$19.95
Gallon . . . . . . . . . . . . . . . .$59.95
Ultra System Floor Products
When coatings are necessary or desirable, this product line consists
of a cleaner, Ultra-Clean, for preparing the surface for adhesion and a
clear slip resistant coating, Ultra-Flex. Ultra-Clean is a heavy duty
detergent designed to clean the floor once Ultra-Flex has been applied.
Ultra-Stripper has been specifically designed for the removal of the
top coat should that be desirable in the future.
PRICE
ITEM
DESCRIPTION
UCLEAN
1 Gallon . . . . . . . . . . . . . . .$35.00
5 Gallon . . . . . . . . . . . . . .$150.00
1 Gallon . . . . . . . . . . . . . . .$55.00
5 Gallon . . . . . . . . . . . . . .$245.00
1 Gallon . . . . . . . . . . . . . . .$37.00
5 Gallon . . . . . . . . . . . . . .$150.00
UFLEX
Available in 1 Gallon
and 5 Gallon Containers.
USTRIP
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
9
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC.
COMPOUNDS & POLISHING POW D E R S
5-EXTRA
#52-B Polishing Powder
• Orange powder consists of aluminum oxide, two natural resins, and
Potassium/5-Extra oxalate.
• Exceptional polishing powder for marbles.
• Specially formulated to prevent burning and to leave a stable, long
lasting polish.
• #52-B - Formulated for hard to polish marble. Completely natural,
non-acidic.
ITEM
DESCRIPTION
EP
50 LB. PAIL $8.75.lb. . . . .$437.50
9 lb. minimum . . . . . . . . . .$78.75
ITEM
DESCRIPTION
52S
8 lb. pail min. $8.50/lb. . . . . . . . . . . . .$68.00
PRICE
PRICE
Tin Oxide
The Tin Oxide we stock is made for the stone trade. It is not a blend of
oxides called Tin Oxide. It is Tin Oxide.
ITEM
Italian Craftsman Polishing Cream
Tin
DESCRIPTION
PRICE
lbs. . . . . . . . . . . . . . . . . . . .$15.00/lb.
It is now practical to use polished marble on floors in high traffic
areas!
Introducing our new revolutionary natural polishing cream! Marble
polishing made simple! Traffic areas can be easily polished!
Maintenance by natural polishing can now be easily handled by your
janitorial staff!
ITEM
ICPC
DESCRIPTION
PRICE
Quart. . . . . . . . . . . . . . . . .$18.00
Oxalic Acid
We offer the finest grade of Oxalic Acid for use with the polishing
powders.
ITEM
DESCRIPTION
PRICE
Acid-10 8-24 lbs. . . . . . . . . . . . . . . . .$2.50/lb.
Acid
25 lb. and up . . . . . . . . . . . . .$1.75/lb.
#52 Special Polishing Powder
The #52 Special Polishing Powder is an aluminum oxide grain specifically formulated for the polishing of marble and granite.
The #52 Special is highly regarded in the marble and granite industry.
This polishing powder is used by vast numbers of floor refinishers
both large and small in the United States, Mexico and Canada.
Granitina
Italian Craftsman® Granitina Buffing Powder is a blended buffing
powder which is used to bring granite to a high polish.
ITEM
DESCRIPTION
PRICE
52-10
5lb. min . . . . . . . . . . . . . . . .$4.25/lb.
ITEM
DESCRIPTION
GP
8lb. pail Min. . . . . . . . . . . . .$64.00
$8.00/lb.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
10
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC.
COMPOUNDS & POLISHING POW D E R S
Granimar Polishing Compound
This new polishing compound created originally as a high-tech
granite polishing compound has proven to be excellent on granite
floors.
ITEM
GPC
DESCRIPTION
PRICE
10lb. Minimum . . . . . . . . . . .$5.00/lb.
Italian Craftsman Honing Powder
Marble Honing Powders. Marble honing powders in three abrasive
grits for a variety of honing and refinishing applications.
Italian Craftsman 600
Italian Craftsman 180
• Removes light scratches.
• Removes heavy scratches.
• Removes light acid etching.
• Removes deep acid etching.
• Creates satin finish.
• Creates rough finish.
• Creates light hone.
• Creates deep hone.
Italian Craftsman 280
• Removes heavy scratches.
• Removes deep acid etching.
• Creates rough finish.
• Creates deep hone.
Italian Craftsman 800
• Removes light scratches.
• Removes light acid etching.
• Creates satin finish.
• Creates light hone.
Italian Craftsman 400
• Removes medium scratches.
• Removes medium acid
etching.
• Creates rough finish.
• Creates deep hone.
ITEM
DESCRIPTION
HP 180 5
HP 280 5
HP 400 5
HP 600 5
HP 800 5
180 grit 5 lb. bucket
280 grit 5 lb. bucket
400 grit 5 lb. bucket
600 grit 5 lb. bucket
800 grit 5 lb. bucket
PRICE
. . . . . . .$60.00
. . . . . . .$60.00
. . . . . . .$60.00
. . . . . . .$60.00
. . . . . . .$60.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
11
EASTERN MARBLE & GRANITE SUPPLY, INC.
G LU E S, ADHESIVES & PATCHING MAT E R I A L S
Italian Craftsman Polyester Adhesive
Travertine Fill
• Best Polyester adhesive in the industry.
Travertine Fill is a wall and floor grout that comes in light travertine
and dark travertine color. This product is used to fill the grout lines
as well as fill the holes. Travertine Fill is a two part system consisting of a beige powder and additive.
• Clear is best designed for adding colorant.
• Flowing and knife grade also available.
ITEM
DESCRIPTION
PRICE
GLUE CKG
GLUE TKG
GLUE BKG
GLUE WKG
GLUE CL
GLUE T
GLUE B
GLUE W
GLUE P
RG
CK
COLOR ----
Clear - Knife Grade (quart) . . . . . . . . . . . . . . .$18.50
Travertine (Beige)-knife grade (qt) . . . . . . . . .$20.00
Black - Knife Grade (quart) . . . . . . . . . . . . . . .$20.00
White - Knife Grade (quart) . . . . . . . . . . . . . .$20.00
Clear - Flowing (quart) . . . . . . . . . . . . . . . . . .$16.00
Travertine (Beige) - flowing (qt) . . . . . . . . . . .$17.00
Black - Flowing (quart) . . . . . . . . . . . . . . . . . .$17.00
White - Flowing (quart) . . . . . . . . . . . . . . . . .$17.00
Penetrating Glue (quart) . . . . . . . . . . . . . . . . .$20.00
Rodding Glue (gallon) . . . . . . . . . . . . . . . . . .$49.00
Coloring Kit (set of 8 tubes) . . . . . . . . . . . . . .$30.00
Individual tube (each) . . . . . . . . . . . . . . . . . .$ 4.20
(black, brown, white, green, red,
blue, ochre, red-brown).
ITEM
DESCRIPTION
TF LIGHT
TF DARK
TFA
1 gallon-Light . . . . . . . . . . .$41.50
1 gallon-Dark . . . . . . . . . . . .$41.50
Additive for Travertine Fill
1 gallon . . . . . . . . . . . . . . . .$12.50
Available in 25 lb. bucket of powder and one
gallon can of additive. Special orders available.
Italian Craftsman Acrylic Glues
• Outstanding for bonding some marbles, some granites, and
limestones.
• Fast setting and easy to use. • Excellent for outdoor applications.
ITEM
DESCRIPTION
PRICE
ACRYLIC F
Acrylic quickset flowing
w/hardener . . . . . . . . . . . . .$24.75
ACRYLIC KG Acrylic quickset knifegrade
w / h a r d e n e r . . . . . . . . . . . . . .$26.75
ACRYLIC P Acrylic penetrating glue . . . . .$20.25
Italian Craftsman Epoxy Glues
• Faster setting (2 - 4 hours), than standard epoxies.
• Chemically bonds to stone surfaces.
• For both indoor and outdoor applications.
ITEM
DESCRIPTION
EPOXY 1/1 T
EPOXY 1/1 TKG
EPOXY 2/1 CL
EPOXY 2/1
Epoxy 1 (A):1(B) transparent flowing . . . . . . . . .$36.75
Epoxy 1 (A):1(B) transparent KG . . . . . . . . . . . .$42.00
Epoxy 2 (A):1(B) clear flowing . . . . . . . . . . . . . .$49.80
Epoxy 2 (A):1(B) clear knife grade . . . . . . . . . . .$56.50
PRICE
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
12
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC.
G LU E S, ADHESIVES & PATCHING MAT E R I A L S
Polyester Glue
ITEM
TENAX BUFF 1LT
TENAX BUFFKG1LT
TENAX CKG 1LT
TENAX CKG 17LT
TENAX CKG 1LT H
TENAX CKG 4LT
TENAX CL 17LT
TENAX CL 1LT
TENAX CL 4LT
TENAX TF
TENAX WATEKG1LT
TENAX WATER 1LT
TENAX WATER 4LT
DESCRIPTION
PRICE
Tenax Buff Flowing 1 LT . . . . . . . . . . . . . . . . . . . . . . .$9.50
Tenax Buff Knife Grade 1 LT . . . . . . . . . . . . . . . . . . . .$9.50
Tenax Transparent Knife Grade . . . . . . . . . . . . . . . . .$11.00
1 LT TIXO
Tenax Transparent Knife Grade . . . . . . . . . . . . . . . .$150.00
17 LT TIXO
Tenax Transparent Knife Grade . . . . . . . . . . . . . . . . .$11.00
“H” 1 LT
Tenax Transparent Knife Grade . . . . . . . . . . . . . . . . .$38.00
4 LT TIXO
Tenax Flowing 17 LT . . . . . . . . . . . . . . . . . . . . . . . .$150.00
Tenax Transparent Flowing 1 LT . . . . . . . . . . . . . . . .$10.00
Tenax Transparent Flowing 4 LT . . . . . . . . . . . . . . . .$38.00
Tenax Travertine Filler 1 LT . . . . . . . . . . . . . . . . . . . . .$9.00
Tenax Water Clear Knife Grade . . . . . . . . . . . . . . . . .$13.00
Thasso 1 LT
Tenax Water Clear Flowing Nitor . . . . . . . . . . . . . . . .$11.00
1 LT 50
Tenax Water Clear Flowing 4 LT . . . . . . . . . . . . . . . .$40.00
Waxes
ITEM
PASTE WAX BLACK
PASTE WAX CLEAR
PECTRO 1LT
PECTRO BLACK 1LT
LIQUID WAX 1LT
DESCRIPTION
PRICE
Tenax Paste wax black 1 LT . . . . . . . . . . . . . . . . . . .$18.00
Tenax Paste wax clear 1 LT . . . . . . . . . . . . . . . . . . . .$15.00
Tenax Petro 1 LT . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.00
Tenax Petro Black 1 LT . . . . . . . . . . . . . . . . . . . . . . .$30.00
Tenax Liquid Wax 1LT . . . . . . . . . . . . . . . . . . . . . . .$12.00
Sealers
ITEM
AGER 1LT
AGER 5LT
AGER 20LT
AGER 1 GAL
HYDREX 1LT
HYDREX 5LT
TENAX PROTEX1LT
DESCRIPTION
PRICE
Tenax Ager Color Enhancing Sealer 1 LT . . . . . . . . . .$55.00
Tenax Ager Color Enhancing Sealer 5 LT . . . . . . . . .$195.00
Tenax Ager Color Enhancing Sealer 20 LT . . . . . . . .$675.00
Tenax Ager Color Enhancing Sealer 1 gal . . . . . . . .$170.00
Tenax Hydrex 1 LT Petroleum . . . . . . . . . . . . . . . . . .$18.00
Tenax Hydrex 5 LT Petroleum Based Sealer . . . . . . .$72.00
Tenax Protex 1 LT Sealer for Porous and . . . . . . . . .$55.00
Hone Stone
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
13
EASTERN MARBLE & GRANITE SUPPLY, INC.
G LU E S, ADHESIVES & PATCHING MAT E R I A L S
Marking Pencils
Razor Blades
• Box of 12–Available colors: Red, yellow and white.
ITEM
ITEM
DESCRIPTION
PRICE
DESCRIPTION
PRICE
RAZOR BLADE 100/PK . . . . . . . . . . . . . . . . .$6.00
MP RED
Box of 12 . . . . . . . . . . . . . . .$23.00
MP YELLOW Box of 12 . . . . . . . . . . . . . . .$23.00
MP WHITE
Box of 12 . . . . . . . . . . . . . . .$23.00
Wax Marking Crayons
Tile Shims
• Box of 12.
• Re-usable plastic shims.
• Available colors: Red, yellow and black.
ITEM
DESCRIPTION
PRICE
MCYELLOW
MCRED
MCBLACK
Box of 12 . . . . . . . . . . . . . . .$13.25
Box of 12 . . . . . . . . . . . . . . .$13.25
Box of 12 . . . . . . . . . . . . . . .$13.25
DESCRIPTION
Tile Shims 7/8" x 5/8" (100/box)
1 1/2" x 1" (100/box)
Tile Shims 2 x 1/16" (100/box)
Tile Shims 2 x 1/8" (100/box)
Tile Shims 2 x 1/4'" (100/box)
Tile Shims 3 x 1/16" (100/box)
Tile Shims 3 x 1/8" (100/box)
Tile Shims 3 x 1/4" (100/box)
PRICE
$ 6.00
$ 9.50
$ 5.50
$ 7.00
$ 8.50
$ 6.50
$ 9.00
$12.00
MARBLE & GRANITE POLISHING MEDIUMS
EASTERN MARBLE & GRANITE SUPPLY, INC.
5” and 10" Carborundum Wheels
Alpha Felt Wheel
ITEM
DESCRIPTION
FW30250
FW40250
FW50250
3” . . . . . . . . . . . . . . . . . . . . . .$6.50
4” . . . . . . . . . . . . . . . . . . . . . .$9.00
5” . . . . . . . . . . . . . . . . . . . . .$13.25
PRICE
ITEM
DESCRIPTION
FELT 4
FELT 5X2
FELT 6
FELT 6 HARD
FELT 7X3/4
FELT 7
FELT 8
FELT 10
FELT 12
FELT 14
FELT RAG 4
4 x 3/4” Medium . . . . . . . . . .$10.50
5 x 2” Medium . . . . . . . . . . .$30.50
6 x 2” Medium . . . . . . . . . . .$43.00
6 x 2” Hard . . . . . . . . . . . . . .$49.00
7 x 3/4” Medium . . . . . . . . . .$22.50
7 x 2” Medium . . . . . . . . . . .$59.00
8 x 2” Medium . . . . . . . . . . .$76.25
10 x 2” Medium . . . . . . . . . .$91.00
12 x 2” Medium . . . . . . . . .$126.75
14 x 2” Medium . . . . . . . . .$172.50
4 x 3/4” with Snail . . . . . . . . .$15.00
Lock Adaptor
7 x 3/4” with Snail . . . . . . . . .$25.75
Lock Adaptor
FELT RAG 7
ITEM
SHIMS SM
SHIMS
SHIMS 2 X 1/16
SHIMS 2 X 1/8
SHIMS 2 X 1/4
SHIMS 3 X 1/16
SHIMS 3 X 1/8
SHIMS 3 X 1/4
www.easternmarble.com
PRICE
ITEM
DESCRIPTION
5”120C
5”240C
5”600C
Baicchi 5” . . . . . . . . . . . . . . .$27.50
Baicchi 5” . . . . . . . . . . . . . . .$27.50
Baicchi 5” . . . . . . . . . . . . . .$27.50
ITEM
DESCRIPTION
10”120C
10”240C
10”600C
Baicchi 10” . . . . . . . . . . . . . .$42.50
Baicchi 10” . . . . . . . . . . . . . .$42.50
Baicchi 10” . . . . . . . . . . . . . .$42.50
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
EASTERN MARBLE & GRANITE SUPPLY, INC.
• 1-800-643-8818
14
PRICE
PRICE
MARBLE & GRANITE POLISHING MEDIUMS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Solid Felt Mops
Edge Polishing Bars and Cotton Pads
The solid felt mops shown in this catalog are the highest quality medium hardness wool felt. Medium hardness felt is the right grade of
felt for polishing stone. The felt wheel is used with polishing powder
such as 5 Extra or 52B to put the final finish on stone.
Attach the special stitched cotton pads to the end grinder or bench
grinder, turn on the machine and touch the bar to the pad causing a
build up of the marlite bar on the pad. Hone the marble edge to be
polished to a 400 hone in the case of light marble, or a 600 hone in
the case of dark marble and buff. The polish will come up in a matter of seconds.
Wrapped Felt Mop
Marlite Edge Polishing Bars are sold in boxes of 6 as
well as individually.
Granite Edge Polishing Bars in either Black or Gold are
sold individually.
Cotton pads are available in either 6” or 8” diameter.
A low cost alternative to the solid felt mop is the wrapped felt mops,
which is a wrapping of felt. It generates heat and no build up of
water and polishing powder can occur due to the construction of the
wrapped felt mop. This polishing wheel offers a good value and has
a high quality work output.
ITEM
Available in medium hardness 4” x 3/4”, 5” x 2”, 7” x
3/4”, 10 x 2”, 12” x 2” and 14” x 2”. Available for
Frankfurt Polishing Systems.
DESCRIPTION
PRICE
PADS 66” Stitched Cotton Pad . . . . .$5.50
PADS 88” Stitched Cotton Pad . . . . .$9.50
Available in Alpha medium hardness 3” x 1/4”, 4” x
1/4”, 5” x 1/4” with velcro backing.
ITEM
DESCRIPTION
PRICE
TB
AP3
10” WFM
14” WFM
FIBER 10
FIBER 14
7” Tampico Brush . . . . . . . . . . . . . . . . . . . .$28.75
2” round 5/8-11 thread female plate . . . . . . .$7.00
10” Wrapped Felt Mop . . . . . . . . . . . . . . . .$26.00
14” Wrapped Felt Mop . . . . . . . . . . . . . . . .$41.50
10” Fiber Polishing Head . . . . . . . . . . . . . .$165.00
14” Fiber Polishing Head . . . . . . . . . . . . . .$257.00
Lead and Felt Wheels
ITEM
DESCRIPTION
PRICE
BARS
BARS
Marlite Edge Polishing Bars . . . . . . . . . . . . . .$6.50 ea.
Marlite Edge Polishing Bars . . . . . . . . . . . . .$24.00/cs.
Case of 6 ($4.00 each)
GR BARS B Granite Edge Polishing Bars–Black . . . . . . . .$8.75 ea.
(recommended for darker granites)
GR BARS G Granite Edge Polishing Bars–Gold . . . . . . . . .$8.75 ea.
(recommended for lighter granites)
The lead and felt wheel is a wrapping of lead and felt which forms a
polishing wheel. The invention of the lead and felt wheel has made
polishing of granite much faster and easier.
The lead and felt wheel should be used with a metal lock support on a
right angle grinder. The lead and felt wheel and polishing powder are
used for the final polish.
Available in 4” and 5” either with the snail lock or without for use with the right angle grinders.
Available in 3-1/2” with velcro backing for use with floor
machines.
Available in 10”, 12”, 14”, 16” and 18” for use with bed
polishers.
ITEM
DESCRIPTION
LEAD 10”
LEAD 12”
LEAD 14”
LEAD 16”
LEAD 18”
LEAD 21”
LEAD RAG 4
LEAD RAG 5
LEAD 3.5”
LEAD 4”
LEAD 5”
10” Lead and Felt . . . . . . . . . . . . . . . . . . . .$68.00
12” Lead and Felt . . . . . . . . . . . . . . . . . . . .$96.00
14” Lead and Felt . . . . . . . . . . . . . . . . . . .$114.00
16” Lead and Felt . . . . . . . . . . . . . . . . . . .$160.00
18” Lead and Felt . . . . . . . . . . . . . . . . . . .$190.00
21” Lead and Felt . . . . . . . . . . . . . . . . . . .$279.00
4” Lead and Felt w/snail lock adaptor . . . . . .$22.00
5” Lead and Felt w/snail lock adaptor . . . . . .$29.00
3.5” Lead and Felt w/velcro . . . . . . . . . . . . .$26.00
4” Lead and Felt . . . . . . . . . . . . . . . . . . . . .$17.50
5” Lead and Felt . . . . . . . . . . . . . . . . . . . . .$30.80
Italian Craftsman Pamir
• Excellent for touching up marble and granite that is difficult to
polish.
• Paraffin wax used around the world. Formulated in Italy.
• Protects countertops and walls.
ITEM
Pamir W
Pamir B
DESCRIPTION
PRICE
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
PRICE
White-Liter . . . . . . . . . . . .$14.70
Black-Liter . . . . . . . . . . . . .$14.70
1-800-643-8818
15
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
New Technology Discs
Generic Diamond Discs
Created with the latest improvements in the formulation of the bond.
Both 3” and 4” New Technology Diamond Discs come in these grit
sizes. (50, 150, 300, 500, 1000, 2000, 3000 and Black and White.)
ITEM
3”
4”
NT_50 . . . . . . . . . . . .$18.00
NT_150 . . . . . . . . . . .$18.00
NT_300 . . . . . . . . . . .$18.00
NT_500 . . . . . . . . . . .$18.00
NT_1000 . . . . . . . . . .$18.00
NT_2000 . . . . . . . . . .$18.00
NT_3000 . . . . . . . . . .$18.00
NT_BLACK . . . . . . . . .$25.00
NT_WHITE . . . . . . . .$25.00
$18.00
$18.00
$18.00
$18.00
$18.00
$18.00
$18.00
$25.00
$25.00
Exclusive. . . Copper Wonders
4” Copper Edge Discs
ITEM
DESCRIPTION
GN1-50
GN1-120
GN1-220
GN1-400
GN1-600
GN1-800
GN1-1800
GN1-3500
GN1-8500
50 grit (green) (each)
120 grit (black) (ea)
220 grit (red) (ea)
400 grit (yellow) (ea)
600 grit (brown) (ea
800 grit (white) (ea)
1800 grit (blue) (ea)
3500 grit (gray) (ea)
8500 grit (purple) (ea)
3”
4”
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
5”
$25.90
$25.90
$25.90
$25.90
$25.90
$25.90
$25.90
$25.90
$25.90
7”
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
Italian Craftsman Viper Discs
• 1st Real Advancement in 10 years.
• This 4” Edge Disk can be used on both marble and granite
• Use both Wet or Dry • Highly Flexible Disk • Cuts Quickly
• Leaves scratches that are less deep and wide when compared to
conventional disks.
• 100 grit leaves almost no visible scratches.
• 200 grit leaves no scratches and begins hone.
ITEM
PRICE
50 Grit Copper
100 Grit Copper
200 Grit Copper
$34.00
$34.00
$34.00
Vitrified
ITEM
GRIT
DESCRIPTION
ICED_50F
ICED_100F
ICED_200F
ICED_400F
ICED_800F
ICED_1500F
ICED_3000F
50
100
200
400
800
1500
3000
resin diamond discs
resin diamond discs
resin diamond discs
resin diamond discs
resin diamond discs
resin diamond discs
resin diamond discs
3”
Alpha Ceramica
3”
GRIT
NO.
VELCRO
COLOR
60
150
300
Blue
Yellow
Orange
4”
PART
NO.
GP30060V
GP30150V
GP30300V
5”
PRICE
PART
NO.
PRICE
$70.00
$57.00
$57.00
GP40060V
GP40150V
GP40300V
$90.00
$75.00
$75.00
PART
NO.
PRICE
GP50060V $130.00
GP50150V $108.00
GP50300V $108.00
Alpha Ceramica
Metal
3”
GRIT
NO.
VELCRO
COLOR
60
150
300
Blue
Yellow
Orange
PART
NO.
FD30060M
FD30150M
FD30300M
4”
PRICE
$76.80
$72.80
$72.80
PART
NO.
PRICE
FD40060M
FD40150M
FD40300M
$99.20
$88.80
$88.80
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
16
$18.00
$18.00
$18.00
$18.00
$18.00
$18.00
$18.00
4”
$21.00
$21.00
$21.00
$21.00
$21.00
$21.00
$21.00
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
Alpha Ceramica
Resin
3”
GRIT
NO.
VELCRO
COLOR
150
300
500
1000
2000
3000
Yellow
Orange
Red
Dark Green
Light Green
Brown
PART
NO.
$38.00
$38.00
$38.00
$38.00
$38.00
$38.00
5”
PRICE
PART
NO.
GP40150R
GP40300R
GP40500R
GP41000R
GP42000R
GP43000R
$50.00
$50.00
$50.00
$50.00
$50.00
$50.00
GP50150R
GP50300R
GP50500R
GP51000R
GP52000R
GP53000R
PRICE
PART
NO.
PRICE
GP30150R
GP30300R
GP30500R
GP31000R
GP32000R
GP33000R
Buff
4”
PART
NO.
PRICE
$72.50
$72.50
$72.50
$72.50
$72.50
$72.50
Alpha Ceramica
3”
GRIT
NO.
BUFF
BUFF
FACE
COLOR
BLACK
WHITE
PART
NO.
4”
PART
NO.
PRICE
GP3BLACK $57.00
GP3WHITE $57.00
5”
GP4BLACK $75.00
GP4WHITE $75.00
PRICE
GP5BLACK $108.00
GP5WHITE $108.00
For Marble, Granite and Limestone
Ex-Pads
ITEM
DESCRIPTION
PRICE
EX40200R
EX40500R
EX41000R
EX42000R
EX43000R
Alpha Ceramica Ex-Diamond . . . . . . . . . . . . . . . . . . . . . .$45.20
Alpha Ceramica Ex-Diamond . . . . . . . . . . . . . . . . . . . . . .$45.20
Alpha Ceramica Ex-Diamond . . . . . . . . . . . . . . . . . . . . . .$45.20
Alpha Ceramica Ex-Diamond . . . . . . . . . . . . . . . . . . . . . .$45.20
Alpha Ceramica Ex-Diamond . . . . . . . . . . . . . . . . . . . . . .$45.20
Convex Diamond Discs
ITEM
GRIT
ICED30C
ICED50C
ICED100C
ICED200C
ICED400C
ICED800C
ICED1500C
ICED3000C
ICEDBLACKC
ICEDWHITEC
30 . . . . . . .
$18.00
50 . . . . . . .
$18.00
100 . . . . . .
$18.00
200 . . . . . .
$18.00
400 . . . . . .
$18.00
800 . . . . . . . . .$18.00
1500 . . . . . . . .$18.00
3000 . . . . . . . .$18.00
Buff Black . . . .$33.00
Buff White . . . .$33.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
17
PRICE
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
3M Profile Shaped Diamond Hand Pads
Abrasive Technology Genesis
Diamond Discs
Velcro backed diamond discs are available in 3”, 4”, 5” and 7” diameter. The following grits are available: nickel bond: 70, 120, 220, 400
and 600. Resin bond: 600, 800, 1800 and 3500.
3M OGEE SHAPED HAND PADS–
2cm and 3cm
ITEM
OGEE SHAPED
ITEM
DDV_60
DDV_120
DDV_220
DDV_400
DDV_600N
DDV_600
DDV_800
DDV_1800
DDV_3500
DESCRIPTION
3” PRICE 4” PRICE 5” PRICE 7” PRICE
70 grit-metal (green)
120 grit-metal (black)
220 grit-metal (red)
400 grit-metal (tan)
600 grit-metal
600 grit-resin (orange)
800 grit-resin (lt. tan)
1800 grit-resin (blue)
3500 grit-resin (dk. tan)
$19.20
$16.40
$13.80
$12.50
$12.50
$11.20
$11.20
$11.20
$11.20
$34.00
$29.00
$24.00
$21.90
$21.90
$19.50
$19.50
$19.50
$19.50
$53.00
$46.00
$38.00
$34.00
$34.00
$31.00
$31.00
$31.00
$31.00
$95.00
$82.00
$68.00
$55.00
$55.00
$49.00
$49.00
$49.00
$49.00
Abrasive Technology–Diamond Belts
• Used on a standard belt sander.
• Diamond in resin for superior cutting.
• Must be used wet.
ITEM
DESCRIPTION
PRICE
DB 70
DB 120
DB 220
DB 400
DB 600
DB 800
DB 1800
DB 3500
70 grit 2 1/2 x 15 1/2
120 grit 2 1/2 x 15 1/2
220 grit 2 1/2 x 15 1/2
400 grit 2 1/2 x 15 1/2
600 grit 2 1/2 x 15 1/2
800 grit 2 1/2 x 15 1/2
1800 grit 2 1/2 x 15 1/2
3500 grit 2 1/2 x 15 1/2
$75.00
$66.00
$57.00
$55.00
$50.00
$50.00
$50.00
$50.00
Abrasive Technology–Diamond
Rectangular Hand Pads
• The original diamond hand pad. • Every shop should have a set.
F_CM60
F_CM120
F_CM400
F_CM800
F_CM500
F_CM1800
2CM PRICE
3M HALF BULLNOSE SHAPED HAND PADS–
2cm
ITEM
“B” SHAPED
B_CM60
B_CM120
B_CM200
B_CM400
B_CM800
B_CM500
B_CM1800
DESCRIPTION
DHP2X4 60
DHP2X4 120
DHP2X4 220
DHP2X4 400
DHP2X4 600
DHP2X4 800
DHP2X4 1800
DHP2X4 3500
2"x4" Flat 60 grit-metal (green) (each) . . . . . . . . .$16.80
2"x4" Flat 120 grit-metal (gray) (each) . . . . . . . . .$14.40
2"x4" Flat 220 grit-metal (red) (each) . . . . . . . . .$12.00
2"x4" Flat 400 grit-metal (yellow) (each) . . . . . . .$10.00
2"x4" Flat 600 grit-metal (orange) (each) . . . . . . .$10.00
2"x4" Flat 800 grit-metal (white) (each) . . . . . . . .$10.00
2"x4" Flat 1800 grit-metal (blue) (each) . . . . . . . .$10.00
2"x4" Flat 3500 grit-metal (white) (each) . . . . . . .$10.00
www.easternmarble.com
PRICE
$33.20
$28.55
$21.00
$21.00
$18.00
$18.00
2CM PRICE
60 grit, M250 Metal (green) . . . . . . . . . . . . . . . .$27.30
120 grit, M125, Metal (black) . . . . . . . . . . . . . . .$23.80
200 grit, M74 Metal (red) . . . . . . . . . . . . . . . . . .$20.85
400 grit, M40 Metal (yellow) . . . . . . . . . . . . . . .$18.85
800 grit, M20 Metal (white) . . . . . . . . . . . . . . . .$18.85
500 grit, R30 Resin (yellow) . . . . . . . . . . . . . . .$15.10
1800 grit, R10 Resin (blue) . . . . . . . . . . . . . . . .$15.10
3M FULL BULLNOSE SHAPED HAND PADS–
2cm, 3cm and 4cm
ITEM
2CM
PRICE
3CM
PRICE
4CM
PRICE
V60 grit, M250 Metal (green) . . . .$27.30
V120 grit, M125, Metal (black) . . .$23.80
V200 grit, M74 Metal (red) . . . . . .$20.80
V400 grit, M40 Metal (yellow) . . . .$18.85
V800 grit, M20 Metal (white) . . . .$18.85
V500 grit, R30 Resin (yellow) . . . .$15.10
V1800 grit, R10 Resin (blue) . . . . .$15.10
$36.05
$30.80
$26.25
$22.70
$22.70
$17.30
$17.30
$42.95
$36.30
$30.55
$25.85
$25.85
$19.65
$19.65
“V” SHAPED
V_CM60
V_CM120
V_CM200
V_CM400
V_CM800
V_CM500
V_CM1800
3M DIAMOND HAND PADS–3M RECTANGULAR
ITEM NO.
2” X 4” HAND PAD
ITEM
3CM PRICE
60 grit, M250 Metal (green). . . . . . $27.30
180 grit, M125, Metal (black). . . . . $23.80
400 grit, M40 Metal (yellow) . . . . . $18.85
800 grit, M20 Metal (white) . . . . . . $18.85
500 grit, R30 Metal (yellow). . . . . . $15.10
1800 grit, R10 Resin (blue) . . . . . . $15.10
3M2x4 60
3M2x4 120
3M2x4 200
3M2x4 400
3M2x4 800
3M2x4 500
3M2x4 1800
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
EASTERN MARBLE & GRANITE SUPPLY, INC. •
PRICE
60 grit, M250 Metal (green). . . . . . $24.80
120 grit, M125, Metal (black). . . . . $20.35
200 grit, M74 Metal (red). . . . . . . . $16.80
400 grit, M40 Metal (yellow) . . . . . $13.55
800 grit, M20 Metal (white) . . . . . . $13.55
500 grit, R30 Resin (yellow). . . . . . $12.20
1800 grit, R10 Resin (blue) . . . . . . $12.20
1-800-643-8818
18
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
Electroplated Honing Diamond Discs
Zec–Silicone Carbide Discs
• Very cost effective • Fast stock removal • Very flexible • For soft
stone and composites
• Best for granite. • 7/8” center hole.
DESCRIPTION
ITEM
GRIT
3”
4”
5”
EP-50_
EP-70_
EP-120_
EP-220_
EP-400_
EP-600_
50
70
120
220
400
600
$20.20
$13.50
$11.16
$10.44
$9.90
$9.90
$35.64
$24.12
$19.80
$17.10
$15.30
$15.30
$58.34
$38.70
$31.68
$26.10
$22.50
$22.50
Diamond Products for Fabrication
Side Extended Saw Blades.
16 grit
24 grit
36 grit
50 grit
60 grit
80 grit
100 grit
120 grit
150 grit
180 grit
220 grit
320 grit
SP4M
SP7M
4”
PRICE
7”
PRICE
GR4 16
$4.75
GRDISCS 16
N/A
GRDISCS 24
GR4 36
$4.75
GRDISCS 36
GR4 50
$4.75
GRDISCS 50
GR4 60
$4.75
GRDISCS 60
GR4 80
$4.75
GRDISCS 80
N/A
GRDISCS 100
GR4 120
$4.75
GRDISCS 120
N/A
GRDISCS 150
N/A
GRDISCS 180
N/A
GRDISCS 220
N/A
GRDISCS 320
3 3/4" Backing pad (for 4” zec) ea.
Backing pad (for 7” zec) ea.
$6.10
$6.10
$6.10
$6.10
$6.10
$6.10
$6.10
$6.10
$6.10
$6.10
$6.10
$6.10
$17.75
$22.00
Pneumatic Drum and Sanding Belts–
Silicon Carbide
• Used like saw blade for cutting or grinding with the sides.
• Rigid and Fast.
• Extended side diamonds to prevent sticking or jamming.
ITEM
BRESD115G
BRES125G
BRES150G
BRES180G
DESCRIPTION
PRICE
Extended Side Disc . . . . . . . . .$88.00
4-1/2” (115 mm)
Extended Side Disc . . . . . . . . .$96.00
5” (125 mm)
Extended Side Disc . . . . . . . .$168.00
6” (150 mm)
Extended Side Disc . . . . . . . . .Call
7” (180 mm)
for pricing
Sait–Silicone Carbide Discs
16 grit
24 grit
36 grit
50 grit
60 grit
80 grit
120 grit
180 grit
220 grit
320 grit
400 grit
5”
ITEM
N/A
N/A
DISCS 5” 36
N/A
DISCS 5” 60GR
DISCS 5” 80GR
DISCS 5” 120G
N/A
DISCS 5” 220G
DISCS 5” 320G
N/A
7’
ITEM
PRICE
$1.70
$1.70
$1.70
$1.70
$1.70
$1.70
DESCRIPTION
PRICE
PD
PD 60
PD 120
PD 220
PD 320
PD 400
5" pneumatic drum 5/8"-11 threading (each)
2 1/2" x 15 1/2" 60 grit
2 1/2" x 15 1/2" 120 grit
2 1/2" x 15 1/2" 220 grit
2 1/2" x 15 1/2" 320 grit
2 1/2" x 15 1/2" 400 grit
$133.00
$ 3.25
$ 3.25
$ 3.25
$ 3.25
$ 3.25
3M Silicon Carbide Belts
• Best for marble. • Fiber backed, flexible.
DESCRIPTION
ITEM
DISCS 16 GR
DISCS 24 GR
DISCS 36 GR
DISCS 50 GRI
DISCS 60 GR
DISCS 80 GR
DISCS 120 GR
DISCS 180 GR
DISCS 220 GR
DISCS 320 GR
DISCS 400 GR
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
PRICE
$2.63
$2.63
$2.63
$2.63
$2.63
$2.63
$2.63
$2.63
$2.63
$2.63
$2.63
3 X 21
ITEM
DESCRIPTION
Tri-R-Mite 24 grit (10 belts/box)
Tri-R-Mite 40 grit (10 belts/box)
Tri-R-Mite 60 grit (10 belts/box)
Tri-R-Mite 80 grit (10 belts/box)
Tri-R-Mite 100 grit (10 belts/box)
Tri-R-Mite 120 grit (10 belts/box)
Tri-R-Mite 150 grit (10 belts/box)
Tri-R-Mite 180 grit (10 belts.box)
Tri-R-Mite 220 grit (10 belts/box)
Tri-R-Mite 240 grit (10 belts.box)
Tri-R-Mite 320 grit (10 belts/box)
Wet/dry cloth 400 grit (5 belts/box)
Wet/dry cloth 600 grit (5 belts/box)
EASTERN MARBLE & GRANITE SUPPLY, INC. •
PRICE
3 x 21 24 GR
3 x 21 40 GR
3 x 21 60 GR
3 x 21 80 GR
3 x 21 100 GR
3 x 21 120 GR
3 x 21 150 GR
3 x 21 180 GR
3 x 21 220 GR
3 x 21 240 GR
3 x 21 320 GR
3 x 21 400 GR
3 x 21 600 GR
1-800-643-8818
$3.75
$3.75
$3.50
$3.50
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$4.00
$4.00
19
3 X 24
ITEM
3 x 24 24 GR
3 x 24 40 GR
3 x 24 60 GR
3 x 24 80 GR
3 x 24 100 GR
3 x 24 120 GR
3 x 24 150 GR
3 x 24 180 GR
3 x 24 220 GR
3 x 24 240 GR
3 x 24 320 GR
3 x 24 400 GR
3 x 24 600 GR
PRICE
$3.95
$3.95
$3.95
$3.50
$3.50
$3.50
$3.50
$3.50
$3.50
$3.50
$3.50
$4.25
$4.25
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
Alpha Sandpaper for Marble Polishing
Silicon Carbide Grinding Wheels
50 pieces per box.
• 5” x 2”, 5/8”-11 thread.
4”
GRIT NO.
80
120
240
320
400
500
600
Assortment
PART
NO.
MP40080
MP40120
MP40240
MP40320
MP40400
MP40500
MP40600
MP40KIT
• 4” x 2”, 5/8-11 thread.
5”
PART
NO.
PRICE
$20.00
$20.00
$20.00
$20.00
$20.00
$20.00
$20.00
$21.45
DESCRIPTION
PRICE
MP50080
MP50120
MP50240
MP50320
MP50400
MP50500
MP50600
MP50KIT
24 grit
36 grit
60 grit
80 grit
120 grit
220 grit
320 grit
400 grit
600 grit
$28.20
$28.20
$28.20
$28.20
$28.20
$28.20
$28.20
$28.60
ITEM
4”
_x2 24
_x2 36
_x2 60
_x2 80
_x2 120
_x2 220
_x2 320
_x2 400
_x2 600
5”
$8.50
$8.50
$8.50
$8.50
$8.50
$9.20
$10.60
$16.60
$16.60
$9.80
$9.80
$9.80
$9.80
$9.80
$11.90
$22.00
$24.00
$24.00
Hermes
ITEM
H_” 40 GR
H_” 60 GR
H_” 80 GR
H_” 120 GR
H_” 220 GR
H_” 320 GR
H_” 400 GR
H_” 600 GR
DESCRIPTION
5” DISCS
PRICE/BOX
OF 50
40 grit (25 box)
60 grit
80 grit
120 grit
220 grit
320 grit
400 grit
600 grit
$18.00
$29.00
$29.00
$24.90
$24.90
$24.90
$24.90
$24.90
7” DISCS
PRICE/BOX
OF 50
Metal Lock Support
$32.90
$54.90
$50.00
$49.00
$49.00
$49.00
$49.00
$49.00
3M–Silicone Carbide & Aluminum
Oxide Screens
ITEM
DESCRIPTION
7” 80 GR
7” 120 GR
7” 220 GR
7” 320 GR
7” 500 GR
7” 600 GR
7” 800 GR
9x11 80 GR
9x11 120 GR
9x11 180 GR
9x11 220 GR
9x11 320 GR
9x11 500 GR
9x11 600 GR
9x11 800 GR
10” 80 GR
10” 120 GR
10” 220 GR
10” 320 GR
10” 500 GR
10” 600 GR
10” 800 GR
14” 80 GR
14” 120 GR
14” 220 GR
14” 320 GR
14” 500 GR
14” 600 GR
14” 800 GR
18” 80 GR
18” 120 GR
18” 180 GR
18” 220 GR
18” 320 GR
18” 500 GR
18” 600 GR
18” 800 GR
PRICE
7” 80 grit
7” 120 grit
7” 220 grit
7” 320 grit
7” 500 grit
7” 600 grit
7” 800 grit
9 x 11” 80 grit
9 x 11” 120 grit
9 x 11” 180 grit
9 x 11” 220 grit
9 x 11” 320 grit
9 x 11” 500 grit
9 x 11” 600 grit
9 x 11” 800 grit
10” 80 grit
10” 120 grit
10” 220 grit
10” 320 grit
10” 500 grit
10” 600 grit
10” 800 grit
14” 80 grit
14” 120 grit
14” 220 grit
14” 320 grit
14” 500 grit
14” 600 grit
14” 800 grit
18” 80 grit
18” 120 grit
18” 180 grit
18” 220 grit
18” 320 grit
18” 500 grit
18” 600 grit
18” 800 grit
www.easternmarble.com
$2.05
$1.45
$1.30
$1.30
$1.35
$1.35
$1.35
$3.10
$2.45
$2.20
$2.20
$2.20
$2.20
$2.20
$2.20
$4.35
$3.10
$2.80
$2.80
$2.85
$2.85
$2.85
$8.05
$5.75
$5.15
$5.15
$5.30
$5.30
$5.30
$13.50
$9.65
$8.65
$8.65
$8.65
$8.90
$8.90
$8.90
ITEM
DESCRIPTION
PRICE
MLS 4"
4" snail lock support
w/5/8 - 11 thread.
5" snail lock support
w/5/8 - 11 thread.
$48.00
MLS 5"
$87.20
Silicon Carbide Grinding Wheels
• Snail lock adapter • Silicon Carbide and magnesite • Good value.
ITEM
_"24
_"36
_"60
_"80
_"120
_"220
_"400
_"800
_"1000
_"1200
_#3/4
_4F
_5X
_GRANILUX
PA __
DESCRIPTION
4”
24 grit (sc or m)
36 grit (sc or m)
60 grit (sc or m)
80 grit (sc or m)
120 grit (sc or m)
220 grit (sc or m)
400 grit (sc or m)
800 grit (m)
1000 grit (m)
1200 grit (m)
Hone wheel
Hone Finish Segment
Polishing segment
Grinding wheel
Plastic Adapter
$ 8.25
$ 8.25
$ 8.25
$ 8.25
$ 8.25
$ 8.25
$ 8.25
$ 9.80
$ 9.80
$ 9.80
$ 9.80
$ 9.80
$10.00
N/A
$ 1.25
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
20
5”
$11.50
$11.50
$11.50
$11.50
$11.50
$11.50
$11.50
$12.75
$12.75
$12.75
$12.75
$12.75
$12.75
$12.75
$ 1.40
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
Drum Stone
Alpha PVA Polisher–Makita Style
Silicone Carbide Grinding Stones.
ITEM
DS36
DS80
DESCRIPTION
PRICE
3 x 3 x 5/8
3 x 3 x 5/8
$11.60
$11.60
PART
NO.
PVAMSK
PVAMSW
PVAMSR
PVAMSB
PVAMSG
PVAMSY
Biggi Stones 4” and 5” with Snail
ITEM
_3/4
_60
_220
_400
_600
_1000
_50X
DESCRIPTION
3/4 Stone
60 Grit
220 Grit
400 Grit
600 Grit
1000 Grit
Sint OX
4”
$11.00
$11.00
$11.00
$11.00
$13.00
$13.00
$45.00
5”
$16.00
$28.00
$28.00
$28.00
$29.00
$29.00
$55.00
Alpha PVA Polisher–Quick Change
PART
NO.
PVAQCK
PVAQCW
PVAQCR
PVAQCB
PVAQCG
PVAQCY
GRIT/TYPE
Assortment Kit
40 Extra Coarse
80 Coarse
220 Medium
400 Fine
600 Extra Fine
QUICK CHANGE BACKER PAD
MLS 4”
5/8”-11
Female Thread
MAXIMUM
RPM
PIECES
PER BOX
PRICE
4,000
4,000
4,000
4,000
4,000
4,000
5
5
5
5
5
5
$33.60
$33.60
$33.60
$33.60
$33.60
$33.60
4,000
1
$48.00
MAXIMUM
RPM
GRIT/TYPE
Assortment Kit
40 Extra Coarse
80 Coarse
220 Medium
400 Fine
600 Extra Fine
ARBOR
12,000
12,000
12,000
12,000
12,000
12,000
PIECES
PER BOX
PRICE
10
10
10
10
10
10
$46.40
$46.40
$46.40
$46.40
$46.40
$46.40
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
Backing Pads
• Backing Pads for use with velcro backed discs.
• Flexible or rigid.
• 5/8-11 female thread or 5/16 male thread
ITEM NO.
DESCRIPTION
ARBOR
RBP
RBP5M
RBP5V
RBP5S
GP_5/8PD
GP_5/8RG
GBP_
GBPR
Diskit
Diskit
Diskit (vinyl)
Diskit (vinyl)
Alpha Flexible
Alpha Rigid
Generic Flexible
Generic Rigid
5/8-11 female
5/16 male
5/8-11 female
5/16 male
5/8-11 female
5/8-11 female
5/8-11 female
5/8-11 female
2”
3”
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
$19.05 $19.05
N/A
$14.50
N/A
$17.00
N/A
N/A
4”
5”
7”
N/A
N/A
N/A
N/A
$19.35
$14.50
$18.00
$14.50
$18.00
$15.50
$15.50
$15.50
$27.80
$22.85
$24.00
N/A
$22.00
N/A
N/A
N/A
N/A
N/A
$33.00
N/A
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
21
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
5” Edge Wheels with Snail Lock for
Straight Edging Machines
ITEM
Alpha for Automatic Machines
Alpha Twincur Edge Polishing System
PART
NO.
PRICE
70 Copper Resin
100 Resin
200 Resin
400 Resin
1000 Resin
2000 Resin
Buff Black
$156.00
$72.00
$72.00
$72.00
$72.00
$72.00
$105.00
TW55850M
TW52450M
TW51850M
Buff
SF40100R
SF40200R
SF40500R
SF41000R
SF42000R
SF43000R
SF4BLACK
SF4WHITE
SF4GREEN
PART
NO.
GRIT
SIZE
PRICE
4”
4”
4”
4”
4”
4”
4”
4”
4”
$129.00
$129.00
$129.00
$129.00
$129.00
$129.00
$129.00
$129.00
$129.00
100
200
500
1000
2000
3000
DARK
LIGHT
ALL
GRIT
5”
5”
5”
50
50
50
MAXIMUM
RPM
ARBOR(S) PRICE
3,500
3,500
3,500
5/8”-11 $329.00
24mm $329.00
18mm-2 $329.00
Twincur ES
Alpha 4” Snail-Lock Resin
PART
NO.
SIZE
ES50200R
ES50500R
ES51000R
ES52000R
ES53000R
DESCRIPTION
PRICE
5” Resin Bond Pol. W/SF-AT #200
5” Resin Bond Pol. W/SF-AT #500
5” Resin Bond Pol. W/SF-AT #1000
5” Resin Bond Pol. W/SF-AT #2000
5” Resin Bond Pol. W/SF-AT #2000
$89.00
$89.00
$89.00
$89.00
$89.00
Twincur EG-S–Resin Bond w/Snail Lock
PART
NO.
GRIT
SIZE
SNL50080 80
SNL50150 150
SNL50300 300
SNL50500 500
SNL51000 1000
SNL52000 2000
SNL53000 3000
SFAT-5/8ADAPTER
5”
5”
5”
5”
5”
5”
5”
5”
PRICE
$69.00
$69.00
$69.00
$69.00
$69.00
$69.00
$69.00
$49.00
Twincur EG-V–Resin Bond with Velcro
5” Velcro™ Backed
SnailLock Adapter
PART
NO.
EGV50080
EGV50150
EGV50300
EGV50500
EGV51000
EGV52000
EGV53000
EGV5SNL
GRIT
SIZE
PRICE
80
5”
150
5”
300
5”
500
5”
1000
5”
2000
5”
3000
5”
5” Velcro Back Snail Lock Adapter
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
22
$69.00
$69.00
$69.00
$69.00
$69.00
$69.00
$69.00
$17.95
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
Magnesite Stones for Radial Arm Polisher
Alpha Summit Radial Arm Polisher
Diamond Discs–Metal
• Stage 1–Metal bond diamond to remove deep scratches evenly.
• Stage 2–Resin bond diamond grits to polish surface. Makes polishing process smooth and fast.
• Stage 3–Final polish brings out deep gloss and luster.
ITEM
6”
8”
GRIT
NO.
PART
NO.
PRICE
50
80
200
400
SM060050
SM060080
SM060200
SM060400
$239.00
$239.00
$239.00
$239.00
PART
NO.
SM080050
SM080080
SM080200
SM080400
10”
PRICE
PART
NO.
PRICE
$369.00
$369.00
$369.00
$369.00
SM100050
SM100080
SM100200
SM100400
$419.00
$419.00
$419.00
$419.00
6”
200
500
1000
2000
3000
PART
NO.
SR060200
SR060500
SR061000
SR062000
SR063000
8”
PRICE
PART
NO.
$159.00
$159.00
$159.00
$159.00
$159.00
SR080200
SR080500
SR081000
SR082000
SR083000
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$16.50
$20.00
$35.00
$39.00
Abrasive Technology
PART
NO.
PRICE
PRICE
$219.00 SR100200 $289.00
$219.00 SR100500 $289.00
$219.00 SR101000 $289.00
$219.00 SR102000 $289.00
$219.00 SR103000 $289.00
8”
PRICE
Grit
1,2,3
4,5,6
Buff
Size
10”
SLABMASTER™
ITEM
PRICE
SM1
$410.00
SM2
$410.00
SM3
$325.00
SM4
$325.00
SM5
$175.00
SM6
$175.00
SMBUFF
$96.00
COMPLETE SYSTEM
(Includes grits 2 through Buff)
C9751000
$1,431.00
6”
BUFF
BUFF
10" 16 grit magnesite stone
10" 24 grit magnesite stone
10" 36 grit magnesite stone
10" 60 grit magnesite stone
10" 120 grit magnesite stone
10" 220 grit magnesite stone
10" 320 grit magnesite stone
10" 600 grit magnesite stone
10" honing wheel (synthetic)
10" polishing wheel
10”
PART
NO.
Buff–Final Polish
GRIT
NO.
10" #00
10" #0
10" #1
10" #60
10" #2
10" #3
10" #4
10" #6
10" #3/4
10" #5X
PRICE
The slabmaster™ system is a quick, cost effective solution to the
problem of retrofitting a radial arm machine with a diamond polishing system. All that is needed is for you to drill 2 holes in your
existing drive head. This system will enable the machine operator to
produce a top quality finish (factory or better) on granite and marble
much faster and easier than by using bricks.
Resin
GRIT
NO.
DESCRIPTION
PART
NO.
10”
PART
NO.
PRICE
PRICE
S06BLACK $210.00 S08BLACK $259.00 S10BLACK $395.00
S06WHITE $210.00 S08WHITE $259.00 S10WHITE $395.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
23
ABRASIVES
EASTERN MARBLE & GRANITE SUPPLY, INC.
Dong Sing Professional Radial Arm
Polishing System 10” Wheels
ITEM
DESCRIPTION
RAM50
RAM200
RAM400
RAR20
RAR40
RAR80
RAR150
RAR300
RAP B
RAP G
RAP W
50 grit metal bond
200 grit metal bond
400 grit metal bond
200 grit resin bond
400 grit resin bond
800 grit resin bond
1500 grit resin bond
3000 grit resin bond
black polishing wheel
gray polishing wheel
white polishing wheel
Frankfurt Stones for Marble
PRICE
$252.00
$189.00
$189.00
$ 96.00
$ 96.00
$ 96.00
$ 96.00
$ 96.00
$155.00
$155.00
$155.00
ITEM
DESCRIPTION
PRICE
FR #00
FR #0
FR1
FR #60
FR #2
FR #3
FR #4
FR #400
FR #6
FR #8
FR #1200
FR #3/4
FR #5X
16 grit segment
24 grit segment
36 grit segment
60 grit segment
120 grit segment
220 grit segment
320 grit segment
400 grit segment
600 grit segment
800 grit segment
1200 grit segment
Hone Synthetic
Polishing Segment
$ 2.00
$ 2.00
$ 2.00
$ 2.00
$ 2.00
$ 2.00
$ 3.00
$ 3.00
$ 4.00
$ 4.00
$ 4.00
$ 5.00
$ 5.00
Indiam–Diamond Frankfurt
• Highest quality diamond and cobalt bond.
• Excellent for rough grinding and calibrating.
Italian Craftsman Diamond
Frankfurt Cobalt Bond
• Excellent for rough grinding and calibrating.
ITEM
DESCRIPTION
FM30
FM60
30/40 grit
60/80 grit
PRICE
$205.00
$195.00
ITEM
DESCRIPTION
IDF1F
IDF1L
IDF2F
IDF2L
IDF3F
IDF3L
Fast Cut, Position 1
Long Life, Position 1
Fast Cut, Position 2
Long Life, Position 2
Fast Cut, Position 3
Long Life, Position 3
PRICE
$240.00
$240.00
$240.00
$240.00
$240.00
$240.00
Frankfurt Holders
ITEM
Frankfurt Stones for Granite
PRICE
FR HOLDERS
$4.35
• High quality Italian made grinding stones.
• Less expensive than diamonds.
• Highest quality silicon carbide.
ITEM
FR GR #0
FR GR #1
FR GR #2
FR GR #3
FR GR #320
FR GR #400
FR GR #600
FR GR #800
FR GR #1000
DESCRIPTION
24 grit segment
36 grit segment
120 grit segment
220 grit segment
320 grit segment
400 grit segment
600 grit segment
800 grit segment
1000 grit segment
PRICE
$ 4.50
$ 4.50
$ 4.50
$ 4.50
$ 4.50
$ 4.50
$ 5.00
$ 5.00
$ 5.00
Dressing Stones
Removes glazing to re-expose diamonds.
ITEM
DESCRIPTION
PRICE
PS-SINGLE 6 X 2 X 2
DRESSING Kit for cleaning stones
CUTTER
Replacement Cutter
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
24
$12.00
$30.00
$15.00
DIAMOND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Indiam Granite Blades
Infinity International Silence Core
10MM Seg.
• 10 mm. Segments.
• Long lasting and clean cutting.
• A long history of excellence
Application: Granite
ITEM
IDBG108
IDBG128
IDBG148
IDBG168
IDBG188
IDBG24P
DESCRIPTION
PRICE
Segmented wet premium
10" . . . . . . . . . . . . . .$140.00
12” . . . . . . . . . . . . . .$210.00
14” . . . . . . . . . . . . . .$260.00
16" . . . . . . . . . . . . .$320.00
18" . . . . . . . . . . . . .$332.00
24" . . . . . . . . . . . . .$541.00
Segmented wet silent core
IDBG10S
10" . . . . . . . . . . . . . .$198.00
IDBG12S8
12" . . . . . . . . . . . . . .$276.00
IDGB14S8
14" . . . . . . . . . . . . . .$304.00
IDGB16S8
16" . . . . . . . . . . . . . .$399.00
IDGB18S8
18" . . . . . . . . . . . . . .$424.00
IDGB24S
24" . . . . . . . . . . . . . .$663.00
PRICE
Segmented wet premium
IDBM10
10” . . . . . . . . . . . . . .$116.00
IDBMW12
12" . . . . . . . . . . . . . .$145.00
IDBM14P
14” . . . . . . . . . . . . . .$175.00
IDBM16P
16” . . . . . . . . . . . . . .$210.00
IDBM18P
18" . . . . . . . . . . . . .$250.00
IDBM24P
24” . . . . . . . . . . . . . .$400.00
IDBM10S
IDBM12S
IDBM14S
IDBM16S
IDBM18S
IDBM24S
Segmented wet silent core
10” . . . . . . . . . . . . . .$165.00
12" . . . . . . . . . . . . . .$190.00
14” . . . . . . . . . . . . . .$230.00
16” . . . . . . . . . . . . . .$275.00
18" . . . . . . . . . . . . .$330.00
24” . . . . . . . . . . . . . .$530.00
SPECIFICATIONS
INF7S10
INF10S10
INF12S10
INF14S10
INF16S10
INF18S10
INF20S10
INF22S10
INF24S10
7" x 10mm Seg. . . . . . . .$169.99
10” x 10mm Seg. . . . . . . .$229.99
12” x 10mm Seg. . . . . . . .$259.99
14" x 10mm Seg. . . . . . . .$289.99
16" x 10mm Seg. . . . . . . .$349.99
18" x 10mm Seg. . . . . . . .$419.99
20” x 10mm Seg. . . . . . . .$539.99
22” x 10mm Seg. . . . . . . .$649.99
24” x 10mm Seg. . . . . . . .$799.99
ITEM
SPECIFICATIONS
INF12S15
INF14S15
INF16S15
INF18S15
INF20S15
INF22S15
INF24S15
12" x 15mm Seg. . . . . . . .$329.00
14” x 15mm Seg. . . . . . . .$375.99
16” x 15mm Seg. . . . . . . .$459.99
18" x 15mm Seg. . . . . . . .$569.99
20" x 15mm Seg. . . . . . . .$659.99
22" x 15mm Seg. . . . . . . .$789.99
24” x 15mm Seg. . . . . . . .$979.99
PRICE
Professional Series Silent Core 9.5MM
Seg. Granite
ITEM
DDBG12S
DDBG14S
DDBG16S
DDBG18S
DESCRIPTION
PRICE
12” blade silence core. . . .$249.00
14” blade silence core. . . .$289.00
16” blade silence core. . . .$369.00
18” blade silence core. . . .$444.00
Lampo 18MM Height Segment Silence
Core Granite
ITEM
DDBG1218S
DDBG1418S
DDBG1618S
DDBG1818S
DESCRIPTION
EASTERN MARBLE & GRANITE SUPPLY, INC. •
PRICE
12” blade silence core. . . .$339.00
14” blade silence core. . . .$389.00
16” blade silence core. . . .$472.00
18” blade silence core. . . .$602.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
PRICE
Infinity III SC International 15MM Seg.
• Best blade manufacturer in the industry.
• 10 mm. Segments.
• Longer lasting and clean cutting.
DESCRIPTION
ITEM
Application: Granite
Indiam Marble Blades
ITEM
BLADES
1-800-643-8818
25
DIAMOND
EASTERN MARBLE & GRANITE SUPPLY, INC.
BLADES
Infinity Silent Core Technology
Marble Blades
Indiam–Continuous Rim Ceramic and
Marble Blade
Application: Marble
• Finest quality Italian blades.
• Long lasting, clean cutting, very cost effective.
Infinity Marble Silence Core
10MM Seg.
ITEM
INF12S10M
INF14S10M
INF16S10M
INF18S10M
INF20S10M
INF22S10M
INF24S10M
SPECIFICATIONS
12" x 10mm Seg. . . . . .$199.99
14” x 10mm Seg. . . . . .$239.99
16” x 10mm Seg. . . . . .$299.99
18" x 10mm Seg. . . . . .$389.99
20" x 10mm Seg. . . . . .$448.99
22" x 10mm Seg. . . . . .$519.99
24” x 10mm Seg. . . . . .$589.99
Infinity Marble Silence Core
15MM Seg.
ITEM
INF12S15M
INF14S15M
INF16S15M
INF18S15M
INF20S15M
INF22S15M
INF24S15M
SPECIFICATIONS
INF12S20M
INF14S20M
INF16S20M
INF18S20M
INF20S20M
INF22S20M
INF24S20M
PRICE
12" x 20mm Seg. . . . . . .$329.99
14” x 20mm Seg. . . . . .$409.99
16” x 20mm Seg. . . . . .$519.99
18" x 20mm Seg. . . . . .$619.99
20" x 20mm Seg. . . . . .$759.99
22" x 20mm Seg. . . . . .$849.99
24” x 20mm Seg. . . . . .$945.99
Italdiamant
PRICE
10" . . . . . . . . . . . . .$120.00
12" . . . . . . . . . . . . .$175.00
Indiam–Contour Granite Blade
• Finest Italian made blades.
• Clean cutting and very cost effective.
ITEM
12" x 15mm Seg. . . . . .$269.99
14” x 15mm Seg. . . . . .$339.99
16” x 15mm Seg. . . . . .$419.99
18" x 15mm Seg. . . . . .$529.99
20" x 15mm Seg. . . . . .$619.99
22" x 15mm Seg. . . . . .$749.99
24” x 15mm Seg. . . . . .$895.99
SPECIFICATIONS
DESCRIPTION
IDB10CR
IDBM12CR
PRICE
Infinity Marble Silence Core
20MM Seg.
ITEM
ITEM
PRICE
DESCRIPTION
IDBGC5
IDBGC7
PRICE
5" . . . . . . . . . . . .
$125.00
7" . . . . . . . . . . . . . . . .$160.00
Indiam–Contour Marble Blade
• Continuous rim.
• Clean cutting and long lasting.
• Very cost effective.
ITEM
DESCRIPTION
PRICE
IDBMC5
IDBMC7
5" electroplated . . . . . . $115.00
7" electroplated . . . . . . .$150.00
I n d i a m – Wo rm Drive Blades
20mm Segments.
ITEM
ID1420
ID1620
ID1820
SPECIFICATIONS
PRICE
• Latest technology, highest quality.
• Very long lasting and cost effective.
14” X 20MM SEG. . . . . .$337.00
16” X 20MM SEG. . . . . .$391.00
18” X 20MM SEG. . . . . .$460.00
ITEM
DESCRIPTION
PRICE
IDBGWD7 7" wet/dry segmented granite . . . . . . . . . . . . . . . .$110.00
IDBWDG8 8" wet/dry segmented granite . . . . . . . . . . . . . . . .$120.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
26
DIAMOND
EASTERN MARBLE & GRANITE SUPPLY, INC.
BLADES
Alpha Contour Blade
Alpha Eclipse
• For sink bowl cutting.
• Dry cutting for masonr y, concrete and Tile.
PART
NO.
SIZE
MAX
RPM
ARBOR
DEPTH
OF CUT
PART
NO.
PRICE
MAX
RPM
SIZE
ARBOR(S)
DE04AL 4” 13,700
20mm,5/8”
DE05AL 4.5” 13,300 7/8”, 20mm, 5/8”
DE05S
5” 12,200 7/8”, 20mm, 5/8”
DE07AL 7” 8,500
5/8”
DE08AL 8” 6,800
5/8”
DB14AL 14” 5,400
1”, 20mm
(Segmented)
CCB004 4” 15,000 20mm,5/8” 3/4” $145.00
CCB045 4.5” 13,300
7/8”
3/4” $150.00
CCB005 5” 12,200
7/8”
1-1/4” $160.00
Alpha Silencer III
PRICE
$38.00
$48.00
$53.00
$71.00
$100.00
$273.00
• For bridge saws.
Alpha Tuck Point
• 1/4” slotting blade–dry.
PART
NO.
SIZE
TYPE
ARBOR
PRICE
SLW1439G
SLW1639G
SLW1839G
SLW1437G
SLW1637G
SLW1837G
14”
16”
18”
14”
16”
18”
General Purpose Granite
General Purpose Granite
General Purpose Granite
Hard Granite
Hard Granite
Hard Granite
60mm, 50mm
60mm, 50mm
60mm, 50mm
60mm, 50mm
60mm, 50mm
60mm, 50mm
$319.50
$366.00
$471.50
$332.50
$395.70
$490.90
PART
NO.
TP04SP
TP07AL
MAX
RPM
SIZE
4”
7”
ARBOR(S)
13,700
8,500
PRICE
7/8”, 5/8” . . . . .$67.00
7/8”, 5/8” . . . .$229.15
Alpha Quad
Alpha Libero
• Dry flush cutting–universal.
• Fine cut for marble.
PART
NO.
DL04A
DL05A
DL07A
DL05S
SIZE
MAX
RPM
ARBOR(S)
4” 13,700
20mm,5/8”
4.5” 13,300 7/8”, 20mm, 5/8”
7”
8,500
5/8”
5” 12,000 7/8”, 20mm, 5/8”
PRICE
$64.00
$71.75
$117.25
$87.95
Alpha Plus
• Dry cut for stone.
PART
NO.
DA04A
DA05A
DA05S
DA06A
DA07A
DA08A
DA09A
DA10A
DA11A
DA12A
DA13A
SIZE
4”
4.5”
5”
6”
7”
8”
9”
10”
10”
12”
12”
MAX
RPM
ARBOR(S)
13,700
20mm,5/8”
13,300 7/8”, 20mm, 5/8”
12,200 7/8”, 20mm, 5/8”
10,200
5/8”, 1/2”
8,500
5/8”
6,800
5/8”
6,500
7/8”, 5/8”
6,100
1”, 5/8”
6,300
5/8”
6,300
1”, 20mm
6,300
20mm
PRICE
$61.00
$68.50
$79.00
$92.25
$98.00
$118.75
$182.00
$205.00
$205.00
$259.00
$259.00
PART
NO.
MAX
SIZE
DA04AH
4”
DA05SH
5”
DA06AH
6”
DA07AH
7”
DVO7HH
7”
BAH-5/8
Adapter
BAH-M10Q Adapter
BAH-M14 Adapter
RPM
LIST
ARBOR(S)
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
PRICE
13,700
20mm Quad Drive
$63.75
13,300
20mm Quad Drive
$82.50
10,200
20mm Quad Drive
$95.00
8,500
20mm Quad Drive
$101.00
8,500 20mm Quad Drive Segmented $106.80
13,700 5/8”-11 Thread/Quad Drive
$25.00
13,700 4” Makita Thread/Quad Drive
$25.00
13,700
M14-2 Thread/Quad Drive
$25.00
1-800-643-8818
27
DIAMOND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Alpha Numero Uno
Generic Diamond Blades
• Wet cutting granite, marble and porcelain.
• 4”, 4-1/2” and 5”.
PART
NO.
GM06A
GM08A
GM10A
SIZE
6”
8”
10”
MAX
RPM
6,000
5,000
3,450
PART
NO.
PRICE
ARBOR(S)
5/8” . . . . .$59.00
5/8” . . . . .$86.75
5/8” . . . .$123.00
BLADES
PRICE
SIZE
GDB
GDB4.5
GDB5
4” generic diamond blade . . . . . .$18.00
4-1/2” generic diamond blade . . .$22.00
5” generic diamond blade . . . . . .$46.00
Alpha Sonic
• Wet cutting ceramic tile.
PART
NO.
SIZE
MAX
RPM
Brazed Blades
PRICE
ARBOR(S)
TS04AL
4” 13,700
20mm, 5/8”
TS05AL 4-1/2” 13,300 7/8”, 20MM, 5/8”
TS06AL
6”
6,000
5/8”
TS07AL
7”
5,500
5/8”
TS08AL
8”
5,000
5/8”
TS10AL 10” 3,450
5/8”
TS12AL 12” 3,200
1”
TS14AL 14” 3,000
1”
$27.25
$30.75
$33.50
$39.00
$41.85
$53.00
$90.75
$136.80
• Available w/removable hub *7/8” hole to stabilize the body or M14,
5/8-11”, 7/8”.
• Great for all materials including fiberglass and composites.
• Diamonds on the side help free the cut slurk design.
PART NO.
Alpha Typhoon
• Wet cutting marble and ceramic.
PART
NO.
SIZE
MAX
RPM
DT06A
DT08A
DT10A
6”
8”
10”
6,000
5,000
3,450
PRICE
ARBOR(S)
5/8” . . . . .$41.85
5/8” . . . . .$55.75
5/8” . . . . .$76.75
Disc 4-1/2” (115 mm) . . . . .$70.00
Disc 5” (125 mm) . . . . . . . .$78.00
Disc 6” (150 mm) . . . . . . . .$86.00
Disc 7” (180 mm) . . . . . . .$114.00
Disc 9” (230 mm) . . . . . . .$144.00
Disc 4-1/2” (115 mm) . . . . .$70.00
Disc 5” (125 mm) . . . . . . . .$78.00
Disc 6” (150 mm) . . . . . . . .$86.00
Disc 7” (180 mm) . . . . . . .$114.00
Disc 9” (230 mm) . . . . . . .$144.00
When ordering, specify hole size or type of connection.
• Professional graite blades GRT series.
• Smooth/fast cutting.
• Turbo rim for granite, hard tile and porcelain.
• Continuous rim.
MK-225 Hotdog™ Tile Blade
PART NO.
SIZE
PRICE
7”
8”
10”
12”
14”
$85.00
$92.00
$120.00
$198.00
$255.00
MK-225 HotDog™ 7mm rim height.
®Patent Pending
PART NO.
DESCRIPTION
Cuts 10% faster and lasts 20% longer.
Innovative tension slots prevent dishing and blade
wobble.
DIA04GRT
DIA45GRT
DIA05GRT
DIA07GRT
4 X .070 X 20MM, 5/8 Adaptor
4_ X .080 X 7/8, 5/8 Adaptor
5 X .080 X 7/8, 5/8 Adaptor
7 X .080 X Dia. Arbor, 5/8
SM Super Premium Porcelain Blades
PART
NO.
PCL07-8
PCL08-8
PCL10-8
SIZE
PRICE
7” Blade . . . . . . . . . . . .$60.00
8” Blade . . . . . . . . . . . .$80.00
10” Blade . . . . . . . . . . . .$90.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
PRICE
Pearl Abrasives
Tile and Porcelain Blades
158434
158435
158436
158571
158693
DESCRIPTION
Granite
BRD115G
BRD125G
BRD150G
BRD180G
BRD230G
Marble
BRD115M
BRD125M
BRD150M
BRD180M
BRD230M
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
28
PRICE
$55.00
$60.00
$69.00
$98.00
DIAMOND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Pearl Abrasives
• Dry cutting electroplated diamond blades for all marbles.
The latest in electroplating technology, this new concept in dry diamond blades contains the highest diamond content available. Its
unique design will throw off all powders and leave a clean, smooth
cut without burns. Perfect for marble, new composite materials and
resins.
Brazed Fine Cut Blades for Marble
and Granite
PART NO.
Granite
BRESD115G
BRES125G
BRES150G
BRES180G
PART NO.
PY004
PY045
PY007
PY008
DESCRIPTION
4 X .09 X 20MM, 5/8 Adaptor
4-1/2 X .09 X 7/8, 5/8 Adaptor
7 X .09 X Diamond, 5/8 Adaptor
8 X .09 X Diamond, 5/8 Adaptor
MAX RPM
PRICE
13,700 . . . . . . .$73.00
13,300 . . . . . . .$96.00
8,500 . . . . . . .$119.00
6,800 . . . . . . .$140.00
Super Dry Green SD Series
•The original turbo.
• Engineered as a high performance, general purpose blade.
• Ultra high strength bond with proven cutting performance.
• Direct sintering technology (DST™) promotes performance and
blade safety.
• Used on various cutting tools to cut concrete, reinforced concrete,
marble, granite, brick, tile and ceramics.
PART NO.
DESCRIPTION
PRICE
DIA04SDA
DIA004SD
DIA045SD
DIA005SD
DIA006SD
DIA007SD
DIA07SDA
DIA008SD
DIA009SD
DIA010SD
DIA10SDA
DIA10SD5
DIA012SD
DIA12SD2
4 X .070 X 7/8, 5/8 Adapter . . . . . . . . . .$73.25
4 X .070 X 20MM, 5/8 Adapter . . . . . . . .$73.25
4-1/2 x .080 x 7/8, 5/8 Adapter . . . . . . . .$83.06
5 x .080 x 7/8, 5/8 Adapter . . . . . . . . . .$85.70
6 x .080 x 7/8, 5/8 Adapter . . . . . . . . . .$104.00
7 x .080 x , 5/8 Adapter . . . . . . . . . . . .$109.86
7 x .080 x 7/8, 5/8 Adapter . . . . . . . . . .$109.86
8 x .080 x , 5/8 Adapter . . . . . . . . . . . .$139.16
9 x .080 x 7/8 , 5/8 Adapter . . . . . . . . . .$205.07
10 x .080 x , 5/8 Adapter . . . . . . . . . . .$219.72
10 x .080 x 1 . . . . . . . . . . . . . . . . . . . . .$219.72
10 x .080 x 5/8 . . . . . . . . . . . . . . . . . .$219.72
12 x .125 x 1 . . . . . . . . . . . . . . . . . . . . .$276.84
12 x .125 x 20mm . . . . . . . . . . . . . . . . .$276.84
BLADES
DESCRIPTION
PRICE
Extended Side Disc 4-1/2” (115 mm) . . . . . . . . $88.00
Extended Side Disc 5” (125 mm) . . . . . . . . . . . $96.00
Extended Side Disc 6” (150 mm). . . . . . . . . . . $168.00
Extended Side Disc 7” (180 mm) . . . . . . . . . . $184.00
Available w/removable hub (7/8” hole) to stabilize the body or M14, 5/8-11”, 7/8”.
Brazed Diamond Concave Discs for
Marble and Granite
• Brazed cutting discs • Concave vanity discs.
• 5/8-11” or M-14 thread for hand held grinders.
• Used for sink openings.
• Fast and easy use.
PART NO.
DESCRIPTION
Granite
BRCD115G
BRCD125G
BCD150G
BRCD180G
PRICE
Concave Disc 4-1/2” (115 mm) . . . . . . . . . . .$96.00
Concave Disc 5” (125 mm) . . . . . . . . . . . . .$110.00
Concave Disc 6” (150 mm) . . . . . . . . . . . . .$132.00
Concave Disc 7” (180 mm) . . . . . . . . . . . . .$148.00
Rodding Blades
PART NO.
IGW10X1/4
IGW12X1/4
IGW14X1/4
SIZE
10” x 1/4”
12” x 1/4”
14” x 1/4”
DESCRIPTION
50mm Bore
50mm Bore
60/50 Bore
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
29
PRICE
Call for pricing.
Call for pricing.
Call for pricing.
EASTERN MARBLE & GRANITE SUPPLY, INC.
SHAPING
Brazed Router Bits
BITS/PROFILE
WHEELS
Consolidated–Template Free Continuous
Diamond Router Bits
Ogee
ITEM
SIZE
PRICE
F201S
F301S
F201
F301
F202
F302
2cm Segmented, pos 1
3cm Segmented, pos 1
2cm, pos. 1
3cm, pos. 1
2cm, pos. 2
3cm, pos. 2
$330.00
$390.00
$200.00
$230.00
$188.00
$220.00
• Use with Master 3000, Sector 93, OMA, Track Tech, and Leader.
• Position 1, 2, and 3 available.
Bull Nose
ITEM
SIZE
B201S
B301S
B401S
B201
B301
B401
B202
B302
B402
2cm Segmented, pos 1
3cm Segmented, pos 1
4cm Segmented, pos 1
2cm, pos. 1
3cm, pos. 1
4cm, pos. 1
2cm, pos. 2
3cm, pos. 2
4cm, pos. 2
PRICE
ITEM
SIZE
V201S
V301S
V401S
V201
V301
V401
V202
V302
V402
2cm Segmented, pos 1
3cm Segmented, pos 1
4cm Segmented, pos 1
2cm, pos. 1
3cm, pos. 1
4cm, pos. 1
2cm, pos. 2
3cm, pos. 2
4cm, pos. 2
$330.00
$376.00
$390.00
$186.00
$212.00
$230.00
$180.00
$204.00
$230.00
Full Bull Nose
PRICE
$360.00
$395.00
$420.00
$226.00
$250.00
$280.00
$218.00
$250.00
$280.00
ITEM
TA-CMTB-CMTC-CMTD-CMTE-CMTF-CMTG-CMTH-CMTI-CMTL-CMTM-CMTN-CMTO-CMTP-CMTQ-CMTR-CMTS-CMTT-CMTU-CMTV-CMTX-CMTY-CMTZ-CM-
SHAPE
A
B
C
D
E
F
G
H
I*
L*
M*
N*
O*
P*
Q*
R*
S*
T
U*
V
X
Y
Z
2CM
$290.00
$325.00
$425.00
$400.00
$400.00
$325.00
$450.00
$300.00
$450.00
$425.00
$450.00
$500.00
$450.00
$425.00
$425.00
$465.00
$500.00
$500.00
$425.00
$345.00
$400.00
$350.00
$325.00
3CM
$345.00
$425.00
$500.00
$500.00
$450.00
$425.00
$550.00
$350.00
$525.00
$500.00
$600.00
$600.00
$550.00
$525.00
$550.00
$600.00
$600.00
$600.00
$600.00
$425.00
$500.00
$450.00
$350.00
4CM
$435.00
$475.00
$550.00
$600.00
$500.00
$525.00
$650.00
$430.00
$625.00
$625.00
$700.00
$700.00
$650.00
$650.00
$650.00
$700.00
$700.00
$700.00
$700.00
$525.00
$600.00
$525.00
$400.00
* Indicates special order.
__ Indicates position and thickness.
Any custom shape can be made for any profile type. Call for details.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
30
EASTERN MARBLE & GRANITE SUPPLY, INC.
SHAPING
Profile Wheels–Segmented Diamond Routers for Angle Grinders
• Profiling of granite and marble/limestone.
• Very aggressive, fast stock removal.
• Good life and very cost effective.
• 5/8-11 or M14 thread.
• Fast delivery.
The use of pre-form wheel is highly recommended to extend the life of
the tools.
PART NO.
DESCRIPTION
Brazed Diamond Routers for Angle Grinders.
• Brazed wheels never loose their shape.
• Profiling of granite and marble/limestone.
• Very aggressive, fast stock removal.
• Good life and very cost effective.
• 5/8-11 or M14 thread.
All come complete with two touchers one follows the shape and the
other controls the depth.
Custom shapes available upon request for different slab sizes and
profiles. Always bevel the edges before using brazed profile wheels.
Not beveling the edges of the stone voids any warranty on these
products.
DESCRIPTION
PRICE
Granite–Available in Pos. 1, 2 & 3
B10G-BR B10 Half Bullnose . . . . . . . . .$133.00
B15G-BR B15 Half Bullnose . . . . . . . . .$140.00
B20G-BR B20 Half Bullnose . . . . . . . . .$151.20
B25G-BR B25 Half Bullnose . . . . . . . . .$161.00
B30G-BR B30 Half Bullnose . . . . . . . . .$191.80
F20G-BR
F20 Ogee . . . . . . . . . . . . . . .$168.00
F30G-BR
F30 Ogee . . . . . . . . . . . . . . .$191.80
H20G-BR H20 Half Bullnose w/step . . . .$238.00
H30G-BR H30 Half Bullnose w/step . . . .$268.00
V30G-BR V30 Full Bullnose . . . . . . . . . $196.00
V40G-BR V40 Full Bullnose . . . . . . . . .$224.00
Easy Edge Shaping Wheels
3 Step System
Pos. 0 Segmented
Pos. 1 Brazed
Pos. 2 Brazed
PART NO.
DESCRIPTION
F201S
F301S
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$330.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$390.00
4 CM
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$200.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$230.00
4 CM
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$188.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$220.00
4 CM
F201
F301
F203
F302
Pos. 0 Segmented
PRICE
Pos. 1 Brazed
Pos. 2 Brazed
PART NO.
DESCRIPTION
B201S
B301S
B401S
B201
B301
B401
B202
B302
B402
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$330.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$376.00
4 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$390.00
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$186.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$212.00
4 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$230.00
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$180.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$204.00
4 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$230.00
Pos. 0
PRICE
Pos. 1 Brazed
Pos. 2 Brazed
PART NO.
DESCRIPTION
V201S
V301S
V401S
V201
V301
V401
V202
V302
V402
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$360.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$395.00
4 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$420.00
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$250.00
4 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$280.00
2 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$218.00
3 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$250.00
4 CM . . . . . . . . . . . . . . . . . . . . . . . . . . .$280.00
PRICE
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
WHEELS
PRICE
Segmented Wheel Available in Step 1 Only.
B10G-SEG
B10
Half Bullnose . . . . . . . . .$183.40
B15G-SEG
B15
Half Bullnose . . . . . . . . .$191.80
B20G-SEG
B20
Half Bullnose . . . . . . . . $217.00
B25G-SEG
B25
Half Bullnose . . . . . . . . .$238.00
B30G-SEG
B30
Half Bullnose . . . . . . . . .$259.00
F20G-SEG
F20
Ogee . . . . . . . . . . . . . . .$217.00
F30G-SEG
F30
Ogee . . . . . . . . . . . . . . .$261.80
E5G-SEG
E5
45 Bevel . . . . . . . . . . . .$154.00
E10G-SEG
E10
45 Bevel . . . . . . . . . . . .$168.00
E15G-SEG
E15
45 Bevel . . . . . . . . . . . .$176.40
V30G-SEG
V30
Full Bullnose . . . . . . . . .$308.00
V40G-SEG
V40
Full Bullnose . . . . . . . . .$329.00
PART NO.
BITS/PROFILE
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
31
SHAPING
EASTERN MARBLE & GRANITE SUPPLY, INC.
BITS/PROFILE
WHEELS
Indiam–Segmented Diamond Router Bits
Diamond Products for Fabrication
• 1/2” gas connection. For Mantello bridge saw router.
• Position 1 available only.
Sintered Vanity Wheels 2”, 3”, 4” x 5/8-11” or M14
• Designed for hand held machines.
• For grinding of sink opening.
• Fast stock removal on granite or marble.
• Continues rim–no vibration
• Non rusting body for long life.
ITEM
SHAPE
2CM
3CM
4CM
A
B
C
D
E
F
G
H
T
V
X
Y
Z
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
MA-CMMB-CMMC-CMMD-CMME-CMMF-CMMG-CMMH-CMMT-CMMV-CMMX-CMMY-CMMZ-CM-
Indiam–Segmented Diamond Router Bits
• Use for Flex/Porter cable routers - 1/2" shaft.
• Position 1 available only.
ITEM
ISSA-CMISSB-CMISSC-CMISSD-CMISSE-CMISSF-CMISSG-CMISSH-CMISST-CMISSV-CMISSX-CMISSY-CMISSZ-CM-
SHAPE
A
B
C
D
E
F
G
H
T
V
X
Y
Z
2CM
3CM
4CM
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$325.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$375.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
$450.00
PART NO.
SW2-036
SW2-060
SW2-120
SW3-036
SW3-060
SW3-120
SW4-036
SW4-060
SW4-120
SIZE
PRICE
2” x 2”
2” x 2”
2” x 2”
3” x 1.25”
3” x 1.25”
3” x 1.25”
4” x 1,25”
4” x 1.25”
4” x 1.25”
Grit 36
Grit 60
Grit 120
Grit 36
Grit 60
Grit 120
Grit 36
Grit 60
Grit 120
$270.00
$200.00
$200.00
$270.00
$200.00
$200.00
$240.00
$240.00
$240.00
Resin Vanity Wheels 5/8-11” or M-14
• Designed for hand held machines.
• Lightweight aluminum body.
• Smooth finish for easy final polish.
PART NO.
SIZE
SW2-200
SW2-400
SW2-800
2” x 2”
2” x 2”
2” x 2”
PRICE
Grit 200
Grit 400
Grit 800
$110.00
$110.00
$110.00
Sink Wheel Segmented
• 5/8” thread.
• 2”, 3” and 4”.
PART NO.
SIZE
DW 2
DW 3
PRICE
2” x 1-1/4”
3” x 1-1/4”
$135.00
$145.00
Indiam 6” Calibrator
Brazed Diamond Products for
Fabrication/Restoration
• Use for granite 1/2” gas connection.
• For planing tables, the back of slabs, etc.
ITEM
PRICE
CW
$600.00
Brazed Vanity Wheels 5/8-11” or M14
• Very cost effective.
• Designed for hand held machines.
• For grinding of sink opening.
• Fast stock removal on granite, marble or limestone.
• Continuous rim–no vibration.
1-1/2” (38 mm) diamond rollers for bush hammer plate.
PART NO.
SIZE
SW2-036
SW2-060
SW2-120
2” x 2”
2” x 2”
2” x 2”
PRICE
Grit 30
Grit 50
Grit 100
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
32
$140.00
$120.00
$120.00
EASTERN MARBLE & GRANITE SUPPLY, INC.
SHAPING
BITS/PROFILE
Granite Honing Systems
6” Brazed Profile Wheel
5” Copper with 5/8-11” thread.
For removing the polished surface of granite to prepare for honing
with an angle grinder.
Shape B for marble and granite tiles.
ITEM
WHEELS
PART NO.
PRICE
DPM6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$275.00
PRICE
5” 80C . . . . . . . . . . . . . .$180.00
5” 400C . . . . . . . . . . . . .$180.00
Alpha - Style–Cup Wheel
• The cup wheel, used with right angle grinders.
• Used for heavy grinding and shaping.
5” Carborundum with snail lock.
For honing granite with an angle grinder.
ITEM
PRICE
5”120C . . . . . . . . . . . . . . . . . . . .$27.50
5”240C . . . . . . . . . . . . . . . . . . . .$27.50
5”600C . . . . . . . . . . . . . . . . . . . .$27.50
PART
NO.
10” Bed polisher wheels with 120Gr copper.
For removing the polished surface of granite slabs to prepare for
honing.
DW4C11
DW4M11
DW6C11
DW6M11
SIZE
4"
4"
6"
6"
GRIT
coarse
medium
coarse
medium
MAXIMUM
RPM
13,700
13,700
10,200
10,200
ARBOR(S)
PRICE
5/8"-11 threaded . . . .$189.00
5/8"-11 threaded . . . .$179.00
5/8"-11 threaded . . . .$339.00
5/8"-11 threaded . . . .$319.00
Call for Pricing.
Alpha - DS Style–Shaping Wheel
• Ideal for working softer stones.
• Light grinding on all stones.
• Does bevels on tiles, and can bullnose slabs.
10” Carborundum wheel or bed polisher.
For honing granite on a bed polisher.
ITEM
PRICE
10”120C. . . . . . . . . . . . $42.50
10”240C. . . . . . . . . . . . $42.50
10”600C. . . . . . . . . . . . $42.50
PART
NO.
DS4C11
DS4C14
DS4CA
SIZE
4"
4"
4”
GRIT
coarse
coarse
coarse
MAXIMUM
RPM
13,700
13,700
13,700
ARBOR(S)
5/8"-11 threaded . . . .$119.00
14mm threaded . . . .$119.00
7/8”, 5/8” . . . . . .$119.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
PRICE
33
EASTERN MARBLE & GRANITE SUPPLY, INC.
SHAPING
BITS/PROFILE
Alpha Profile Wheel
DC Series
Electroplated–Marble only.
Single and Double Row Cup Wheels
• Heavy duty deep layer of diamonds.
• Ideal for smoothing concrete and stone..
PART
NO.
DPM638
MAXIMUM
RPM
ARBOR(S)
6,000
PRICE
PART NO.
5/8” . . . . .$294.00
Single Row
DC4CH
DC7CH
Double Row
DC4CDH
DC4CDA
DC5CDH
DC7CDH
DC7CDA
Alpha Twistouch Adapter/Turbo
PART
NO.
SIZE DESCRIPTION
TU30100R
TU30200R
TU30500R
TU31000R
TU32000R
TU33000R
TU3BLACK
TU3WHITE
TW25/8AL
WHEELS
PRICE
3” 100 GRIT
3” 200 GRIT
3” 500 GRIT
3” 1000 GRIT
3” 2000 GRIT
3” 3000 GRIT
3” Final Buff
3” Final Buff
2’ Backer, 5/8”-11 thread
$49.00
$49.00
$49.00
$49.00
$49.00
$49.00
$65.00
$65.00
$29.00
SPECS
4 x 5/8 - 11 . . . . . . . . . . .$51.00
7 x 7/8 - 11 . . . . . . . . . . .$96.81
4 x 5/8 - 11 . . . . . . . . . . .$74.00
4 x 7/8, 5/8 . . . . . . . . . . . .$74.00
5 x 5/8 - 11 . . . . . . . . . . .$115.00
7 x 5/8 - 11 . . . . . . . . . . .$145.00
7 x 7/8, 5/8 . . . . . . . . . . .$145.00
Easy Edge/Small
• For beveling granite and marble tiles, plus other thin stone
• 5/8-11 or M14 available
ITEM NO.
SIZE
B3/8G-BR
B1/2G-BR
3/8” Profile
1/2” Profile
Pearl Diamond Cup Wheel
Premium
• Turbo style wheel features directly sintered turbo rim.
• The grinding surface is over 3/4” in radius, three times that of the
competitive wheels.
PART NO.
PW4CH
PW4MH
PW6CH
SPECS
PRICE
4 x 5/8 - 11 thread (coarse) . . .$205.00
4 x 5/8 - 11 thread (medium) . .$200.00
6 x 5/8 - thread (coarse) . . . . . .$352.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
34
PRICE
$190.00
$190.00
EASTERN MARBLE & GRANITE SUPPLY, INC.
SHAPING
Easy Sanding Discs
ITEM NO.
4”_
PRICE
SEK4P0
SEK4P1
SEK4P2
SEK4P3
SEK4P4
SEK4P5
POS. 0
POS. 1
POS. 2
POS. 3
POS. 4
POS. 5
$36.00
$35.00
$32.00
$32.00
$32.00
$32.00
ITEM NO.
7”_
PRICE
SEK7P0
SEK7P1
SEK7P2
SEK7P3
SEK7P4
SEK7P5
POS. 0
POS. 1
POS. 2
POS. 3
POS. 4
POS. 5
$62.00
$58.00
$54.00
$54.00
$54.00
$54.00
BITS/PROFILE
Architectural Brazed Bits.
• Fast stock removal on hard and soft materials.
• Long life.
• Various shapes available.
PART NO.
#1 R01-1
#2 R02-1
#3 AB-3/16
AB-1/4
AB-3/8
#4 R24-1
#5 R25-2
R25-1
#6 R24-3
#7 R24-2
#8
#9 R10-1
#10 R02-1
#11 R02-1
#12 R19-1
#13 R18-6
#14 R18-8
#15 R18-7
#16 R18-5
#17 R18-3
#18 R18-2
#19 R18-4
R18-1
#20 R20-1
#21 R21-1
#22 R22-1
Generic Cup Wheels
Silent Turbo Cup Wheel
• Long life, good balance.
• For use on angle grinders.
• To hand shape edges (all stone).
• Very cost effective.
PART NO.
SIZE
GCW5/8
GCW5/8M
GCW5/8F
4” Coarse . . . . . . . . . . . . . . . .$99.00
4” Medium . . . . . . . . . . . . . . .$99.00
4” Fine . . . . . . . . . . . . . . . . . .$99.00
WHEELS
DESCRIPTION
PRICE
15 mm 1/2 sphere - 1/4” shank . . . . . . . . . . . .$32.00
15 mm x 10 mm - 1/4” shank . . . . . . . . . . . . .$36.00
Anchor bit 3/16” . . . . . . . . . . . . . . . . . . . . . . .$34.00
Anchor bit 1/4” . . . . . . . . . . . . . . . . . . . . . . . .$44.00
Anchor bit 3/8” . . . . . . . . . . . . . . . . . . . . . . . .$70.00
25 mm x 15 mm - 1/4” shank . . . . . . . . . . . . .$36.00
14 mm x 12 mm - 1/4” shank . . . . . . . . . . . . .$36.00
30 mm x 15 mm - 1/4” shank . . . . . . . . . . . . .$44.00
28 mm x 15 mm - 1/4” shank . . . . . . . . . . . . .$44.00
17 mm x 10 mm - 1/4” shank . . . . . . . . . . . . .$36.00
17 mm x 12 mm - 1/4” shank . . . . . . . . . . . . .$36.00
15 mm triangle - 1/4” shank . . . . . . . . . . . . . .$36.00
15 mm sphere 1/4” shank . . . . . . . . . . . . . . . .$36.00
25 mm dia. 5 mm thick - 1/4” shank . . . . . . . .$36.00
12.5 mm dia. 2 mm thick - 1/4” shank . . . . . . .$32.00
30 mm dia 5 mm thick - 1/4” shank . . . . . . . . .$36.00
20 mm dia 1.5 mm thick - 1/4” shank . . . . . . .$32.00
25.4 mm dia. 2.5 mm thick - 1/4” shank . . . . .$32.00
30 mm dia. 2.5 mm thick - 1/4” shank . . . . . . .$32.00
40 mm dia. 4 mm thick - 1/4” shank . . . . . . . .$36.00
30 mm dia. 4 mm thick - 1/4” shank . . . . . . . .$32.00
50 mm dia. 2.5 mm thick - 1/4” shank . . . . . . .$54.00
10 mm x 25 mm - 1/4” shank . . . . . . . . . . . . .$36.00
30 mm x 10 mm - 1/4” shank . . . . . . . . . . . . .$36.00
10 mm x 16 mm - 1/4” shank . . . . . . . . . . . . .$36.00
PRICE
Brazed Anchor Bits
• Long life.
• For marble and granite.
• Available in 3/16”, 1/4”, 3/8”.
PART NO.
AB-3/16
AB-1/4
AB-3/8
SIZE
PRICE
Anchor Bit 3/16” . . . . . . . .$34.00
Anchor Bit 1/4” . . . . . . . . .$44.00
Anchor Bit 3/8” . . . . . . . . .$48.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
35
CORE
EASTERN MARBLE & GRANITE SUPPLY, INC.
BITS/HOLE
SAWS
Indiam–Segmented Diamond Core Bits
Indiam–Diamond Straight Cutting Bits
• 1/2” gas connection.
• Use with Indiam water swivel.
• Italian Quality, very cost effective.
Finger Bits.
• Finest Italian manufacturer.
• Long lasting, and very cost effective.
ITEM
DESCRIPTION
ICBG 3/4
ICBG 1"
ICBG 1 1/8
ICBG 1 1/4
ICBG 1 3/8
ICBG 1 1/2
ICBG 1 3/4
ICBG 2"
ICBG 2 1/4
ICBG 2 1/2
ICBG 2 3/4
ICBG 3"
ICBG 3 1/2
ICBG 4"
PRICE
3/4" Core Bit . . . . . . . . . .$ 69.00
1" Core Bit . . . . . . . . . . .$ 73.50
1 1/8" Core Bit . . . . . . . .$ 81.50
1 1/4" Core Bit . . . . . . . .$ 85.00
1 3/8" Core Bit . . . . . . . .$ 87.00
1 1/2" Core Bit . . . . . . . .$ 96.00
1 3/4" Core Bit . . . . . . . .$105.00
2" Core Bit . . . . . . . . . . .$120.00
2 1/4" Core Bit . . . . . . . .$140.00
2 1/2" Core Bit . . . . . . . .$155.00
2 3/4" Core Bit . . . . . . . .$170.00
3" Core Bit . . . . . . . . . . .$175.00
3 1/2" Core Bit . . . . . . . .$195.00
4" Core Bit . . . . . . . . . . .$215.00
DESCRIPTION
PRICE
3/4" segmented core bit . . . . . . . . .$ 69.00
1" segmented core bit . . . . . . . . . . .$ 73.50
1 1/4" segmented core bit . . . . . . . .$ 85.00
1 3/8" segmented core bit . . . . . . . .$ 87.00
1 1/2" segmented core bit . . . . . . . .$ 96.00
1 3/4" segmented core bit . . . . . . .$105.00
2” segmented core bit . . . . . . . . . .$136.00
2-1/4 segmented core bit . . . . . . . .$143.00
2-3/4 segmented core bit . . . . . . . .$174.00
3” segmented core bit . . . . . . . . . .$181.00
3-1/2” segmented core bit . . . . . . .$195.00
DESCRIPTION
1/2” ADAPTER
1/2 GAS to 5/8
1/2 GAS MALE
1/2 GAS ADAPTER
ADAPTER 1/2 GAS
MANTELLO ADAPTE
5/8 ADAPTER
1/2" straight shaft cutting bit . . . . . . . .$275.00
3/4” straight shaft cutting bit . . . . . . .$275.00
2" cutting bit - half gas connection . . .$275.00
3" cutting bit - half gas connection . . .$375.00
ITEM
DESCRIPTION
IBN 1/8
IBN 3/16
IBN 1/4
IBN 5/16
IBN 3/8
IBN 1/2
IBN 5/8
1/8" blunt nose bit . . . . . . . . .$ 35.00
3/16" blunt nose bit . . . . . . . .$ 42.00
1/4" blunt nose bit . . . . . . . . .$ 45.00
5/16" blunt nose bit . . . . . . . .$ 45.00
3/8" blunt nose bit . . . . . . . . .$ 55.00
1/2" blunt nose bit . . . . . . . . .$ 60.00
5/8" blunt nose bit . . . . . . . . .$ 65.00
ITEM
DESCRIPTION
CCB114
CCB138
1 1/4” . . . . . . . . . . . . . . . . . . .$80.00
1 3/8” . . . . . . . . . . . . . . . . . . .$83.00
PRICE
1/2" male shaft to 10mm thread . . . . . . . .$27.00
5/8”-11 female thread to 1/2 gas . . . . . . .$36.00
female thread
1/2 gas male shaft to . . . . . . . . . . . . . . . .$36.00
1/2 gas female thread
Hex diameter with 1/2 gas . . . . . . . . . . . .$36.00
female on both ends
1/2 gas male shaft to 5/8”-11 male . . . . . .$36.00
1/2 gas male to ghines . . . . . . . . . . . . . . .$36.00
1/2 shaft to 5/8-11 male . . . . . . . . . . . . . .$20.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
PRICE
Condour Premium Core Drill Bit
• 4” x 5/8-11” thread.
Adaptors
ITEM
PRICE
• Use with Indiam water swivel.
• 1/2” gas adapters.
• Use with right angle grinders.
• 5/8-11 female thread.
CB 3/4
CB 1
CB 1 1/4
CB 1 3/8
CB 1 1/2
CB 1 3/4
CB 2
CB 2 1/4
CB 2 3/4
CB 3
CB 3 1/2
ISS 1/2"
ISS 3/4”
IDCB
IDCB 3"
DESCRIPTION
Indiam–Diamond Blunt Nose Drill Bits
Core bits also available with 1/2” shaft.
ITEM
ITEM
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
36
PRICE
CORE
EASTERN MARBLE & GRANITE SUPPLY, INC.
BITS/HOLE
Infinity Segmented Core Bits
Brazed Easy Drill Core Bits
All infinity core bits come with 5/8”-11 thread.
• Easy drill bit for marble and granite.
• Brazed core bits 5/8-11” connection.
• Dry and wet application.
• 5/8-11” female thread.
ITEM
SPECIFICATIONS
PRICE
INFCB 1/4
INFCB 3/8
INFCB 1/2
INFCB 3/4
INFCB 1
INFCB 1 1/4
INFCB 1 3/8
INFCB 1 1/2
INFCB 2
INFCB 2 1/4
INFCB 2 1/2
INFCB 3
INFCB 3 1/2
INFCB 4
1/4” Diameter . . . . . . .$49.99
3/8” Diameter . . . . . . .$54.99
1/2” Diameter . . . . . . .$64.99
3/4” Diameter . . . . . . .$74.99
1” Diameter . . . . . . . .$79.99
1 1/4” Diameter . . . . .$89.99
1 3/8” Diameter . . . . .$94.99
1 1/2” Diameter . . . . .$99.99
2” Diameter . . . . . . . .$129.99
2 1/4” Diameter . . . . .$144.99
2 1/2” Diameter . . . . .$159.99
3” Diameter . . . . . . . .$189.99
3 1/2” Diameter . . . . .$199.99
4” Diameter . . . . . . . .$229.99
Alpha Core Drill Bit
PART
NO.
DCB01000
DCB01250
DCB01375
DIAMETER
1”
1-1/4”
1-3/8”
THREAD
5/8”-11
5/8”-11
5/8”-11
PART NO.
DESCRIPTION
BGCD12x50-5/8
BGCD16X50-5/8
BGCD19x50-5/8
BGCD25X50-5/8
BGCD32x50-5/8
BGCD35x50-5/8
BGCD50x50-5/8
PRICE
1/2” diameter . . . . . . . . . . . . . . . . . . . . .$52.00
5/8” diameter . . . . . . . . . . . . . . . . . . . . .$56.00
3/4” diameter . . . . . . . . . . . . . . . . . . . . .$59.00
1”diameter . . . . . . . . . . . . . . . . . . . . . . .$60.00
1 1/4” diameter . . . . . . . . . . . . . . . . . . .$70.00
1 3/8” diameter . . . . . . . . . . . . . . . . . . .$74.00
2” diameter . . . . . . . . . . . . . . . . . . . . . .$88.00
PRICE
$73.36
$83.75
$94.32
Brazed CNC Routers
• For marble and granite.
• Standard 1/2” gas connection.
• Central water feed.
• Precision design for balance.
PART NO.
BGRC16x30
BGRC18X30
BGRC22x30
BGRC25X30
BGRC16x40
BGRC18X40
BGRC22X40
BGRC25X40
BGRC16X50
BGRC18x50
BGRC22x50
BGRC25X50
DESCRIPTION
EASTERN MARBLE & GRANITE SUPPLY, INC. •
PRICE
5/8” diameter x 30mm long . . . . . . .$144.00
3/4” diameter x 30mm long . . . . . . .$144.00
7/8” diameter x 30mm long . . . . . . .$160.00
1” diameter x 30mm long . . . . . . . .$160.00
5/8” diameter x 40mm long . . . . . . .$154.00
3/4” diameter x 40mm long . . . . . . .$154.00
7/8 diameter x 40mm long . . . . . . .$170.00
1” diameter x 40mm, long . . . . . . . .$170.00
5/8” diameter x 50mm, long . . . . . .$180.00
3/4” diameter x 50mm, long . . . . . .$180.00
7/8” diameter x 50mm, long . . . . . .$196.00
1” diameter x 50mm, long . . . . . . . .$196.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
SAWS
1-800-643-8818
37
CORE
EASTERN MARBLE & GRANITE SUPPLY, INC.
BITS/HOLE
SAWS
Easy Drill Core Bit
Brazed Diamond Router Cutting Bits.
Brazed Core Drill
• 1/2” shaft marble and granite
Have a Router with a Chuck? Having Trouble Finding bits that fit?
Well you’re in luck. Look at this? Multi-plated diamond router cutting
bits, half bullnose, full bullnose, ogee or any shape that you design.
These bits are made with the latest diamond plating technology. These
bits cut. They are not copies of old style bits, they are truly new
technology.
Bits with a 1/2” shaft for profiling marble are available in a variety of shapes.
PART NO.
DESCRIPTION
PRICE
BGCD50x50-5/8
BGCD19X50-5/8
BGCD25x50-5/8
BGCD32X50-5/8
BGCD35x50-5/8
2” diameter . . . . . . . . . . . . . . . . . . . . . . .$144.00
3/4” diameter . . . . . . . . . . . . . . . . . . . . . .$80.00
1” diameter . . . . . . . . . . . . . . . . . . . . . . . .$92.00
1 1/4” diameter . . . . . . . . . . . . . . . . . . . .$112.00
1 3/8” diameter . . . . . . . . . . . . . . . . . . . .$120.00
Do You have an L-tech or Park Industries Router? Have any kind of
computerized table router?
We have the same technology for these routers too, including a
revolutionary new cutting bit that drills its own holes. These bits are
American made and special bits can usually be specially ordered.
Diamond Cutting Bits for marble are available with either a 3/4” or 1/2” shaft.
PART NO.
ILB 1/4 X 1/4
ILC 1/2 X 1/2
ILP-A-1CMX1/2
ILP-A-2CMX1/2
ILP-A-3CMX1/2
ILP-V-1CMX1/2
ILP-V-2CMX1/2
ILP-V-3CMX1/2
ILP-F-1CMX1/2
ILP-F-2CMX1/2
ILP-F-3CMX1/2
DESCRIPTION
PRICE
1/4” straight shaft bit w/1/4” shaft . . . . . . . . . . . .$80.00
1/2” straight shaft bit w/1/2” shaft . . . . . . . . . . .$140.00
1 cm half bullnose–1/2” shaft . . . . . . . . . . . . . . .$150.00
2 cm half bullnose–1/2” shaft . . . . . . . . . . . . . . .$180.00
3 cm half bullnose–1/2” shaft . . . . . . . . . . . . . . .$215.00
1 cm full bullnose–1/2” shaft . . . . . . . . . . . . . . .$155.00
2 cm full bullnose–1/2” shaft . . . . . . . . . . . . . . .$180.00
3 cm full bullnose–1/2” shaft . . . . . . . . . . . . . . .$235.00
1 cm ogee–1/2” shaft . . . . . . . . . . . . . . . . . . . .$155.00
2 cm ogee–1/2” shaft . . . . . . . . . . . . . . . . . . . .$180.00
3 cm ogee–1/2” shaft . . . . . . . . . . . . . . . . . . . .$215.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
38
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Flex - LW1503 Grinder/Polisher Electric
• Model LW1503.
• Speed, 3600 RPM.
• 5/8" - 11 thread.
• Weight - 4 1/2 lbs.
• 110 volt, 8 amp.
• Built in GFI circuit protection.
• Center water feed.
Suhner - UXF4R Variable Speed
Grinder/Polisher - Electric
• Model UXF4R.
• Variable speed combination grinder and polisher.
• Speed, 1600 - 3500 RPM.
• 5/8" - 11 thread. • Weight - 6.5 lbs.
• 110 volt, 5 - 7 amp. • Double insulated.
• Center water feed
ITEM
DESCRIPTION
LW1503
Flex electric grinder . . . . . . . . . . . . . .$280.00
PRICE
ITEM
DESCRIPTION
PRICE
UXF4R
V.S. grinder/polisher - electric . . . . . . . . .$450.00
Suhner - UWD2N/UWD4N Grinder/Polisher Electric
Suhner -UXJ2 Heavy Duty
Grinder/Polisher - Electric
• Model UWD2N/UWD4N
• Combination grinder and polisher.
• Speed, 2000 RPM/4000 RPM.
• 5/8" - 11 thread. • Weight - 7 lbs.
• 110 volt, 5 amps/7 amps. • Double insulated • Center water feed.
• Model UXJ2.
• Heavy duty combination grinder and polisher.
• Speed, 2000 RPM. • 5/8" - 11 thread.
• Weight - 12 lbs. • 110 volt, 6 amp.
• Double insulated. • Center water feed.
ITEM
ITEM
DESCRIPTION
UXJ2
H.D. grinder/polisher electric . . . . . . .$495.00
PRICE
UWD2N
UWD4N
DESCRIPTION
PRICE
2000 RPM angle grinder . . . . . . . . . . . . .$315.00
4000 RPM angle grinder . . . . . . . . . . . . .$315.00
Flex LW 603 VR–Heavy Duty Wet
Variable Speed Grinder/Polisher
Alpha - AWP158 Grinder/Polisher Electric
• Larger and more powerful for heavier accessories and more
demanding applications.
• Powerful 14 amp motor with overload protection and soft-start.
• Electronic speed control for constant RPM.
• 1000-2800 RPM. • Center water feed. • 5/8”-11 spindle
• GFI operator protector circuit breaker built into the power supply
cord.
• Model AWP158.
• Combination Right Angle Grinder and polisher.
• Speed, 3000 RPM.
• 5/8” - 11 thread.
• Weight - 6 lbs.
• 110 volt, 4 amps.
• Center water feed.
SPECIFICATIONS
LW603VR
Max pad diameter
Speed
Power Input
Power Output
Weight
ITEM
AWP158
DESCRIPTION
PRICE
Variable speed grinder/polisher . . . . . . . .$279.70
with case
ITEM
LW603VR
130 mm/ 5”
1000-2800 RPM
1500 Watts/14 amps
1000 Watts
3.4 kg/7.5 lbs.
DESCRIPTION
PRICE
Variable speed grinder/polisher . . . . . . . .$345.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
TOOLS
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
39
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
TOOLS
Global #215 High Speed Grinder–5”
Makita 9564CV Angle Grinder
Features: Low CFM–Super Fast.
• No electric hazard.
• Total elimination of dust
• Quiet operation.
• Center Waterfeed.
• EPA and OSHA compliant.
4-1/2” Angle grinder, VS, 12 amp, 2800-10,500 RPM.
SPECIFICATIONS:
Speed-Max
Weight
Length
CFM@90 PSI
Arbor
Air inlet
ITEM
215
12,000 RPM
2.3 Pounds
11-7/8”
14.3
5/8-11
1/4 inch
DESCRIPTION
PRICE
$205.00
High speed grinder
Porter Cable #7408–4-1/2” Angle Grinder
• Powerful 6.6 amp AC only motor.
• 10,000 RPM.
• Lock-on slide switch.
• 5/8”-11 spindle.
• Right, left or top handle mount.
• 100% ball and roller bearing construction.
• Standard equipment: grinder, 4-1/2” wheel #280275, guard #55312,
side handle #198633, wrench #100110 and operating manual.
ITEM
DESCRIPTION
M-9564CV
DeWalt #402- Right Angle Grinder Electric
• Model 402.
• 4 1/2" mini grinder.
• Speed, 10,000 RPM.
• 5/8" - 11 thread.
• Weight - 4 lbs.
• 110 volt.
DESCRIPTION
DW402
ITEM
PC7408
DESCRIPTION
PRICE
$99.95
Angle grinder
Makita 9527PB Angle Grinder
4-1/2” Angle grinder, 10,000 RPM, 6.4 Amps, Paddle Switch.
ITEM
M-9527PB
DESCRIPTION
PRICE
$125.00
Angle grinder
$239.00
Angle grinder
ITEM
Diamond Blades
PRICE
PRICE
DeWalt right angle grinder
Flex LST 1503VR Variable Speed Tread
Milling Tool
• Model LST 1503 VR.
• Variable speed 1000 - 3000 RPM.
• 60 hard metal tips.
• Working width adjust from 1 3/4" - 4".
• Adjustable stop.
• Overload protection.
• Vacuum dust collection.
• 110 volt, 11 amp.
Item
LST1503VR
Description
Price
Flex Bushhammer Tool
$675.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
$ 98.00
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
40
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Flex F1509FR Tuck Point Machine
Flex–7428–7” Variable Speed Polisher
Flex M1509 FR Tuck Point Machine 7/8” Spindle, 11 amps, 10,000
rpm. Uses up to 5” blade.
Adjustable cutting depth up to a full 1”.
Alpha Tuck Point Wheels
For brick re-pointing.
ITEM
F1509FR
DESCRIPTION
TOOLS
• Powerful 10 amp meter.
• Protective plastic cover on gear housing and padded rest help prevent scratching or scarring of work.
• Speed limiting dial wheel and variable speed trigger.
• Hook and loop back-up pad for quick and easy pad removal and
installation.
• Spindle lock.
• Lock-on switch.
• 1,000-3,000 RPM pad speed.
• New bale handle.
• Standard Equipment: Polisher, hook and loop pad #54747, bale
handle and operating manual.
PRICE
Tuck point machine . . . . . . . . . . . . . . . . .$345.00
Flex 1302 Center Water Feed Grinder
Flex 1302 Center Water Feed, 10.5 lbs., 10.6 amps, 5/8-11 spindle,
2000 rpm.
ITEM
F7428
DESCRIPTION
PRICE
7” Variable Speed Polisher . . . . . . . . . . . .$245.00
Flex LK 302VE Polisher
ITEM
LW1302AT
DESCRIPTION
PRICE
Center water feed grinder . . . . . . . . . . . . .$459.00
Lower rpm precision machine for all demanding polishing
applications.
• Powerful 5.8 amp motor.
• 800-2000 rpm.
• Plastic gear housing cover and padded rest protects work surface.
• Spindle lock for easy pad changes.
• Comfortable, lock-on trigger switch.
• 5/8”-11 spindle.
SPECIFICATIONS
Maximum pad diameter
Speed
Power input
Power output
Weight
ITEM
LK302VE
DESCRIPTION
PRICE
302 Variable Speed Polisher . . . . . . . . . . .$225.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
180 mm/7”
800-2000 rpm
600 watts/5.8 amps
350 watts
3 kg/6.5 lbs.
1-800-643-8818
41
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
TOOLS
Flex L1109-Heavy-Duty Angle Grinder
Flex Dry LK603VV Variable
Speed Polishers
LK603VV-Heavy-duty electronic variable speed polisher
New and improved electronic precision machine for all demanding
polishing applications.
• Powerful 10 amp motor with overload protection and soft-start.
• Electronic dial speed control for constant RPM’s under differing
loads.
• 1000-3000 RPM
• Plastic gear housing cover and padded rest to protect work surface.
• Spindle lock for easy pad changes.
• Comfortable, lock-on trigger switch.
• 5/8”-11 spindle.
This lightweight, easy-to-use angle grinder for 4-1/2” grinding wheels.
• Powerful 6.6 amp motor.
• Spindle lock for easy wheel changes.
• Rugged metal gear box.
• Long life motor.
• 5/8”-11 spindle.
SPECIFICATIONS
Maximum grinding pad
diameter
Speed
Power Input
Power Output
Weight
115mm/4-1/2”
10,000 RPM
710 watts/6.6 amps
420 Watts
1.6 kg/3.5 lbs.
STANDARD EQUIPMENT
ITEM
LK603VV
DESCRIPTION
1 guard (4-1/2”)
1 clamping flange
1 retaining nut
1 side handle
1 spanner wrench
PRICE
$235.00
Flex dry variable speed polisher
ITEM
L1109
Flex L1106VE-Heavy-duty electronic
variable speed grinder
DESCRIPTION
PRICE
Heavy-duty angle grinder
This lightweight, variable speed, easy-to-use polisher for 4-1/2”
grinding wheels.
• Powerful 6.6 amp motor with overload protection.
• 2000-6500 RPM
• Plastic gear housing cover to protect work surface.
• Spindle lock for easy wheel changes.
• Lock-on slide switch.
• Long life motor.
• 5/8”-11 spindle.
SPECIFICATIONS
Maximum wheel diameter
Speed
Power Input
Power Output
Weight
125mm/5”
2000-6500 RPM
710 watts/6.6 amps
420 Watts
1.6 kg/3.5 lbs.
STANDARD EQUIPMENT
1 guard (5”)
1 clamping flange
1 clamping nut
1 slide handle
1 pin spinner
1 grip cover
ITEM
L1106VE
267.503
132.322
132.330
194.034
100.110
259.403
DESCRIPTION
PRICE
$175.00
Electronic variable speed grinder
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
171.476
132.322
132.330
194.034
100.110
42
$149.00
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Flex LW1509 Center Water Feed and Side
Water Feed
• 10,000 RPM • 800 Watts • 7.8 Amps.
• Center water feed, with external water feed.
• 5/8 x 11 Spindle thread • Built in GFCI.
• Safety guard with rubber water skirt.
ITEM
DESCRIPTION
LW1509
Center water feed . . . . . . .$339.00
TOOLS
Global #218 Lightweight Polishing Tool
This total elimination of dust. No electrical hazard interchangeable
handles centershaft waterfeed. EPA and OSHA compliant hoses,
3” backing pad included.
• Extra Light.
• Variable Speed.
PRICE
ITEM
DESCRIPTION
PRICE
218
Polishing tool . . . . . . . . . .$189.00
SPECIFICATIONS
Weight
3 lbs., 8 ozs.
Length
7 Inches
CFM@90 PSI
11.4
Speed
400 to 5200
Arbor
5/8-11–M-14
Rear Exhaust through Shroud
Flex L1506VR Electric Grinder
This powerful variable-speed grinder will do it all: cutting, grinding,
polishing and buffing.
• 110 V + 11 amps = extra power!
• Adjustable speed from 2200-6800 rpm.
• Maximum Disk diameter: 5”.
• 5/8 x 11 spindle thread.
• Left or right detachable side handle.
• 3.5 lbs.
ITEM
DESCRIPTION
PRICE
L1506VR Electric grinder . . . . . . . . . $195.00
Flex L1503VR Polisher
Suhner - Rotostar III Flexible Shaft Machine
• 3 speeds - 3000, 6000, 12,000 RPM.
• RZ5 adapter can run as slow as 1000 RPM.
• Motor size - 1 3/4 HP, weight -14 lbs.
• 6' flexible shaft.
• 5/8" - 11 thread.
• 110 volt.
Flex L1503VR variable speed polisher.
• 110 V, 10 amps .
• 1200-3700 rpm.
ITEM
DESCRIPTION
PRICE
L1503VR Variable speed polisher . . .$196.00
ITEM
FLEXIBLE SHAFT
DESCRIPTION
PRICE
Rotostar III flexible shaft machine . . . . . . .$2,000.00
Alpha Air 658 - Grinder/Polisher - Air
• Model AIR658.
• Combination Right Angle Grinder and polisher.
• Speed, 2000 RPM. • 5/8" - 11 thread.
• Light Weight - 4 lbs. • 110 volt, 4 amps.
• Air Reg. 85-95 Psig, 5 cfm
• Center water feed.
ITEM
AIR658
DESCRIPTION
PRICE
Alpha air grinder/polisher . .$375.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
43
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Milwaukee 5540 Variable Speed Dry Right
Angle Grinder/Polisher - Electric
• Model 5540.
• Variable speed, 0 - 2800 RPM.
• 5/8" - 11 thread.
• Weight, 9 lbs.
• 110 volt 11 amp.
Bosch Drill
• 0-850 RPM.
• 110 volt, 1/2” chuck.
ITEM
DRILL
ITEM
DESCRIPTION
M5540
TOOLS
DESCRIPTION
PRICE
Bosch drill–Model 1028 VSR. . . . . . . . . . . . . . . .$159.00
1/2” chuck.
PRICE
Milwaukee VS dry angle grinder
$295.00
Portable Drill Press
Makia 5” Disc Sander
ITEM
GV5000
PRICE
DESCRIPTION
4,500 RPM
5/16” female thread
$145.00
ITEM
DP
Milwaukee - Worm Drive Saws
SWIVEL SM
DESCRIPTION
PRICE
Drill press-Coring Unit Column . . . . . . . . . . . . . .$348.00
Variable speed 0-850 RPM.
Water Swivel-Small . . . . . . . . . . . . . . . . . . . . . . .$99.00
• 4,400 RPM.
• 110 volt, 15 amp.
ITEM
DESCRIPTION
PRICE
WORM DRIVE
MWORM DRIVE 8
7-1/4 saw, 16 lbs, 2-1/4 depth
8-1/4 saw, 17.3 lbs, 2-3/4 depth
$295.00
$325.00
Skilsaw–Worm Drive Saw
• 110 volt, 13 amp.
ITEM
DESCRIPTION
PRICE
SWORM DRIVE 7-1/4” saw, 4,400 RPM, 2-1/4 depth
WORM DRIVE 8 8-1/4” saw, 4,300 RPM, 2-3/4 depth
$295.00
$315.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
44
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Flex BED 55 Drill Press
Flaming Tool
Drilling unit to work in tight spaces.
Slim, yet stable drill stand with side support and long feed column. In
staircases, this allows drilling on a higher step from the lower one.
By rotating the feed column, it is also possible to drill in corners and
recesses on banister, gravestones and natural stone baths. The combination of mechanical three-speed gearing and VR full-wave electronic control matches the drilling speed to any bit diameter.
• GFI operator protector circuit breaker built into power supply cord.
• Built-in water intake through the gearhead.
• VR full-wave electronic control.
• Safety slip clutch.
• Core bit connection G-1/2”.
• Drill travel up to 300 mm/12”.
• Water collector included.
• Used to put flamed surface on granite.
• Propane and oxygen.
• 6” width.
• Waterfeed attachment for cooling.
• Rides on rollers.
• Does not include regulators on tanks.
SPECIFICATIONS
Diamond core bits-max. dia. 12-85mm/1/2”-3”
Speed (under load)
350-4600 RPM
Speed 1st gear
350-1000 RPM
2nd gear
800-2300 RPM
3rd gear
1600-4600 RPM
Power Input
1200 watts/11 amps
Power Output
700 watts
Weight (complete)
14.1 kg/31 lbs.
Base of stand
420 x 120mm
ITEM
BED55
DESCRIPTION
ITEM
TOOLS
PRICE
FLAMING TOOL . . . . . . . . . . . . .$1,600.00
Sink Undermount Kits
• Epoxy to the bottom on the counter top.
• No drilling necessary.
• Screw in to mount undermount kits.
PRICE
Drilling unit . . . . . . . . . . . . . . . . . .$1,549.00
ITEM
QN25UM
QN36UM
QN50UM
DESCRIPTION
PRICE
25” Sink undermount 1.70 lbs. . . . . . . . . . . . . . . . . . . .$39.80
36” Sink undermount 2.40 lbs. . . . . . . . . . . . . . . . . . . .$45.33
50” Sink undermount 2.70 lbs. . . . . . . . . . . . . . . . . . . .$69.20
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
45
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
Sector E-1V 220 Volt
• 220 V-3 phase motor.
• Single speed 9500 RPM.
• 3.5+ HP.
• Complete with G.F.I., thermal overload switch and safety device eliminating automatic re-start of motor.
TOOLS
Ghines SECTOR Shaping and
Milling Machines
• Approximate weight: 65 lbs.
• Shaping, honing and polishing tools available.
• Tools requiring no template available from stock.
Sector 93
ITEM
SE1V 220
DESCRIPTION
PRICE
220V, 9500 RPM thermal overload machine. . . .$2,800.00
• 48 V - 7.4 Amps, 4 HP motor.
• Adjustable speed, 2400-10,600 RPM.
ITEM
S93
Sector E-1V
• Powerful 110V motor.
• Single speed 9500 RPM.
• Complete G.F.I., thermal overload switch and safety device eliminat ing automatic re-start of motor.
ITEM
SE1V
DESCRIPTION
PRICE
110V, 9500 RPM thermal overload machine. . . . . . .$2,800.00
DESCRIPTION
PRICE
Single phase adjustable 4 HP machine. . . . . . . .$4,428.00
Power requirements: 220V single phase.
Flex Edge Milling Tool
• Model LWW1506 VR.
• Variable speed 2200-6500 RPM.
• Weight 13 lbs.
• 110 volt, 11 amps.
• Built in GFI circuit protection.
• Center water feed.
• Slab thicknesses–3/4”-1-1/4”.
• 1/2” spindle thread.
Ghines SECTOR Aquaplaning
Conversion Kit
ITEM
LWW1506VR
DESCRIPTION
PRICE
Flex edge milling tool . . . . . .$849.00
Flex Edge Milling Tool
ITEM
SECTOR KIT
DESCRIPTION
PRICE
Aquaplaning conversion kit. . . . . . . . . . . . . . . . . .$399.00
• Model LWW2106 VR.
• Variable speed 2200-6500 RPM.
• Weight 22 lbs.
• 110 volt, 15 amps.
• Built in GFI circuit protection.
• Center water feed.
• Slab thicknesses–3/4”-1-3/4”.
• 1/2 gas female thread.
ITEM
DESCRIPTION
LWW2106VR
Flex 15 amp. . . . . . . .$1,495.00
edge milling tool
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
46
PRICE
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
TOOLS
Blade Roller
Milwaukee #5223–Straight End
Grinder/Electric
• Model 5223.
• Speed 7000 RPM.
• 5/8-11” thread.
• Weight - 12 lbs.
• 110 volt, 12 amp.
• Adjustable wheel guard.
ITEM
DESCRIPTION
M5223
Milwaukee straight . . . . .$395.00
end grinder
PRICE
• No tools required.
• Eliminates costly heavy equipment–Allows operator to cut concrete
using a circular saw with the same results as using expensive equipment like self-propelled relief cutting machines.
• Little assembly required–Using the metal retainer bar and thumb
screw, remove or install Blade Roller™ literally in seconds without
the use of tools!
• Water kit attachment–Controls the diffusion of dust and increases
the life of tool and blade.
• Easy to use–Can be lifted with one hand, unlike its bulky and heavier
predecessors.
• No damage on material surface while cutting– Non-marking wheels
protect from marring while the saw travels along the material.
USE THE BLADE ROLLER WHEN:
• Cutting concrete slab, marble, granite,
wonder board, plywood and stucco.
• Creating access cuts in slab concrete for
plumbing and electrical retrofit.
• Making tension relief lines in slab
concrete.
• Scoring decorative lines in poured slab
or overlays.
• Fabricating slab granite and marble
countertops, floors, etc.
• Ripping long straight cuts on plywood
sheeting.
• Creating cut-outs in stucco for
retrofitting doors and windows.
Suhner USF2R Straight Grinder
Perfect for polishing edges on engineered stone.
• 1000W, 110V.
• Speed 2000 RPM.
ITEM
PRICE
BLADE ROLLER
ITEM
DESCRIPTION
PRICE
USF2R
Suhner 2,000 rpm’s . . . . . . . . .$399.00
straight grinder
Blade Water Kit
Loc-Line Products
Plastic tubing, nozzles, connections and hosing.
ITEM
DESCRIPTION
PRICE
S85HOSE
S85 segmented water hose . . .$9.75
1/4” x 5-1/2” 2 per pack
S85VAL
S85 shut off in-line . . . . . . . .$12.75
valve 2 per pack
S85NOZZLE Y
S85 “Y” fitting for hoses . . . . .$6.35
1/4” fitting (pack of 2)
S85 flare nozzle 2 per . . . . . . .$8.50
1/4 hose 2 per pack
S85NOZZLE 1”
S85T
S85NOZZLE 1/8
S85T1/2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$80.00
Segments “T” fitting 1/4” . . . .$9.00
S85 Round nozzle 1/8” . . . . . .$4.80
for 1/4” fitting (pack of 4)
Segments “T” fitting 1/2” . . .$11.65
Controls Dust and Increases Tool Life.
• Helps control dust.
• Finger tip controls allows for minimal use of water.
• Longer blade and tool life due to cooling and lubricating process.
• Recommended for precision cutting.
• Kit includes: GFCI, ball valve diverter assembly and all necessary
hardware for fastening to tool.
(Use a ground fault interrupter in all applications.)
ITEM
WATER KIT
PRICE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$75.00
S85NOZZLE 1 1/4” S85 Flare Nozzle 1-1/4” . . . . .$10.50
for 1/2” hose (pack of 2)
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
47
EASTERN MARBLE & GRANITE SUPPLY, INC.
HAND
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
48
TOOLS
HAND
EASTERN MARBLE & GRANITE SUPPLY, INC.
TOOLS
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
49
HANDLING
EASTERN MARBLE & GRANITE SUPPLY, INC.
High-Rise Boom
Seam Setter
• Designed for Shops with low Overhead Clearance.
• 20_” high.
• Extends 7’-12’.
• Maximum 4,000 lbs.
• Includes hooks.
• Price FOB manufacturer.
Turnbuckle Clamping.
ITEM
TBC
EQUIPMENT
DESCRIPTION
PRICE
Seam setter clamps . . . . . . . . . . . . . . . . . . . .$139.95
Slab Rack
ITEM
HRB
DESCRIPTION
PRICE
Slab Rack Set.
Consists of 2 bottom racks, 14 posts. Zinc plated.
High rise boom . . . . . . . . . . . . . . . . . . . . . . .$1,050.00
ITEM
Cables
SLABRACK
DESCRIPTION
PRICE
2 per set . . . . . . . . . . . . . . . . . . . . . . . . . . . .$695.00
Boom
ITEM
CABLES 18
CABLES 19
CABLES 21
DESCRIPTION
PRICE
18 ft. long with eyehook catch on each end . . . . . . . . .$97.00
19 ft. long with eyehook catch on each end . . . . . . . .$110.00
21 ft. long with eyehook catch on each end . . . . . . . .$116.00
• Heavy-duty construction.
• 4,000 lb. maximum.
• 7’10” arm for easy slab access.
• Includes hooks.
• Price FOB manufacturer.
Heavy-Duty Boom Hook
ITEM
BOOM
ITEM
DESCRIPTION
HOOK
Lifting hook . . . . . . . . . . . . . . . . . . . . . . . . . . .$60.00
DESCRIPTION
PRICE
Low-rise boom
$750.00
PRICE
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
50
HANDLING
EASTERN MARBLE & GRANITE SUPPLY, INC.
EQUIPMENT
Slab Dolly
Suction Cup–Double
• Hard rubber wheels.
• Rugged construction.
• 5” diameter cups.
• Levers on each cup to create and release suction.
• Up to 125 lb. max.
• Use for support on large sink cut out.
ITEM DESCRIPTION
SD
PRICE
Slab dolly . . . . . . . . . . .$209.00
ITEM
SCD
Slab Holder Trolly
DESCRIPTION
PRICE
Double suction cup . . . . . . .$85.00
Bar Clamps
• Air inflated wheels.
• Rugged construction.
• Locks slab in place.
• Best price in all of America.
• Many sizes available.
• Discounts on quantities.
ITEM
SHT
DESCRIPTION
PRICE
ITEM
Slab holder trolly . . . . . .$550.00
DESCRIPTION
CLAMPS 6
CLAMPS 12
CLAMPS 24
PRICE
Adjustable . . . . . . . . .$4.50
Adjustable . . . . . . . . .$5.50
Adjustable . . . . . . . . .$7.50
Suction Cup–Single
Pendant Control, Battery/Hydraulic
Slab Cart
• 8” diameter.
• Finger pump to create suction.
• For lifting 125 lb. max.
• Simple spring release.
ITEM
SCS
DESCRIPTION
PRICE
Single suction cup . . . . . .$99.00
The next generation of our powered slab cart now has a pendant control, which allows the operator to adjust elevation and tilt without
having to reach under the loaded slab. The pendant has enough
length to allow the operator to stand up to 36” away from the cart
and make adjustments. When not in use, the control stores in a protective tube.
This cart is still made in the U.S.A., turn on its own radius, has pneumatic tires for smooth transport and is equipped with heavy duty
rollers for adequate support of fragile stone.
Apron
• High quality vinyl apron.
ITEM
DESCRIPTION
APRON
Apron . . . . . . . . . . . . . . .$17.00
PRICE
• Pendant control allows operation without having to reach under loaded slab.
• Battery/hydraulic powered raise, lower
and tilt.
• Includes 110-volt battery charger.
• Pneumatic tires on axle.
• Heavy duty caster on front.
• Height adjustments from 29” to 42”.
• Load capacity: 1,200 lbs.
• Heavy duty rollers for material support.
• Made in the U.S.A.
ITEM
SLAB CART
PRICE
. . . . . . . . . . . . . . . . . . . .$5,300.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
51
HANDLING
EASTERN MARBLE & GRANITE SUPPLY, INC.
EQUIPMENT
Abaco Heavy Duty Lifter
Slab Lifter–Turner Clasp
• Safety: Existing devices generally require a great deal of room to
engage the inner face of the slab. The Abaco Lifter requires only a
small movement of the slab to engage and grip the slab, which is
generally well below the overbalance angle thus eliminating the danger to the operator.
• Size: Being of a compact construction, it allows for close packed
slabs to be lifted out of racks and containers. Lower height slabs
placed along side of taller slabs offer no problem.
• Versatile: Ideal for construction work. Because the clamping mechanism is to the front of the slab. It allows panels to be placed close
against walls.
• Secure: Grips slabs firmly. Has a face multiplying factor of approximately 2.5 to 1 compared with the common scissor device of
approx. 2 to 1. Additionally, the bottom of the lifter is coated with
rubber to prevent chipping and scratching damage to the other
stones in the rack. With Abaco Lifter’s design, you will never replace
the 64-square inches of gripping pads. Rated for 1650 pounds, the
Abaco Lifter can take care of all your lifting needs for years to come!
• Large–slabs up to 13 cm. thick and 2400 lbs.
• Small–slabs up to 7 cm. thick and 1100 lbs.
Cable Connect
ITEM
DESCRIPTION
ABACO30
ABACO50
ABACO75
CC
PRICE
Abaco 30 lifter . . . . . . . . . . . . . . . . . . .$475.00
Abaco 50 lifter . . . . . . . . . . . . . . . . . . .$550.00
Abaco 75 lifter . . . . . . . . . . . . . . . . . . .$625.00
Cable connect . . . . . . . . . . . . . . . . . . . . .$26.00
ITEM
STCL
STCS
SLPR
DESCRIPTION
PRICE
Large slab lifter–
turner clasp w/cables . . . . . .$767.00
Small slab lifter–
turner clasp w/cables . . . . . .$593.00
Replacement pads/
slab lifter/turner clasp . . . . .$19.00/Ea.
Slab Lifters
• Large–slabs up to 11 cm. thick and 2400 lbs.
• Small–slabs up to 7 cm. thick and 1100 lbs.
ITEM
DESCRIPTION
PRICE
SLAB LIFTER
SLS
SLPS
SLPSS
Large slab lifter . . . . . . . . . . . . . . . . . . . . . . .$399.00
Small slab lifter . . . . . . . . . . . . . . . . . . . . . . .$299.00
Replacement pads–large slab lifter . . . . . . . . . .$65.00
Replacement pads–small slab lifter . . . . . . . . . .$45.00
Slab Lifter–Scissor Type
MODEL
GRIP RANGE
Abaco 30
Abaco 50
Abaco 75
0-30mm, 0”-1-1/4”
15-50mm, 5/8”-2”
20-75mm, 3/4”-3”
CLAMP WT.
WEIGHT L.L.
12.5 KG
20.2 KG
27.5 KG
1200 KG/2640 lbs.
1200 KG/2640 lbs.
1200 KG/2646 lbs.
Nylon Straps
Bundle Straps for Bundle Lifting.
• Heavy duty nylon straps from Italy designed for lifting slabs.
ITEM
DESCRIPTION
• Slabs up to 7 cm. thick and 1100 lbs.
ITEM
DESCRIPTION
SLAB LIFT SM
Scissor–slab lifter . . . . . . . . . . . . . . . . . . . . . .$295.00
PRICE
PRICE
STRAPS L
Large nylon straps
16'4" x 2.5" . . . . . . . . . .$130.00
STRAPS LONGExtra long nylon straps
18'x4" . . . . . . . . . . . . . .$175.00
STRAPS M
Medium straps
14’ 6” . . . . . . . . . . . . . . .$125.00
STRAPS S
Small straps
13’ . . . . . . . . . . . . . . . .$105.00
Available in small (13’ x 2.5”), medium 14” 6” x 2.5”), large (16” x 4” x 2.5”) and extra large
(18’ x 4”). Sold in pairs.
www.easternmarble.com
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
52
EASTERN MARBLE & GRANITE SUPPLY, INC.
HANDLING
EQUIPMENT
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
53
SAWS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Mondial Mec Mini Bridge Saws
Slab Saw
• Saw head inclines 0-45º.
• Longitudinal cut manual driven.
• Saw bed has internal steel reservoir for the blade coolant with
submersible water pump
• Available in 110 volts.
The heavy duty Manta 300 saw is designed for precision cuts in marble, granite, virtually all types of stone and cement forms. Easily
adjusted for any angle from 0º to 45º by rotating the motor and saw
assembly. A lateral extension with rollers enable large slabs to be
supported for cutting.
The heavy duty Manta 350 is economically priced, yet built with a
heavy frame and designed for easy to use. Cuts any type of stone.
Angle cuts range from oº to 45º. The hard wood bench is equipped
with a lifting system that permits multidirectional positioning system
of slabs.
Motorized vertical axis movement of blade, variable speed forward and
automatic reverse.
ITEM
MODEL
M65
M85
M120
M150
EMS200
Manta 65
Manta 85
Manta 120
Manta 150*
Manta 200*
BLADE
SIZE
RPM
10”
12”
14”
14”
14”
2,800
2,800
2,800
2,800
2,800
CUTTING
LENGTH
25”
33.4”
47”
59”
78”
UP &
DOWN
5”
5”
5”
8”
8”
PRICE
$1,630.00
$1,890.00
$2,400.00
$3,900.00
$5,450.00
*Includes side table.
ITEM
M250
M300T
POCKER350
MODEL
HP
BLADE
SIZE
250
300
350
7.5
7.5
7.5
16”
16”
16”
RPM
CUTTING
LENGTH
2,800
2,800
2,800
98”
118”
137”
UP &
DOWN
7” $14,250.00
7” $16,800.00
7” Call for price
Mini Bridge Saw with Side Table
• Saw head inclines 0-45º.
• Longitudinal cut crank driven.
• Includes side table 40” x 20”.
• Available in 110 volts.
• Saw bed has internal steel reservoir for the blade coolant with
submersible water pump.
ITEM
MODEL
LX120
LX150
LX200
Manta 120 LX
Manta 150 LX
Manta 200 LX
BLADE
SIZE
RPM
14”
14”
14”
2,800
2,800
2,800
CUTTING
LENGTH
47”
59”
78”
UP &
DOWN
7”
7”
7”
PRICE
$2,600.00
$3,750.00
$5,400.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
54
PRICE
SAWS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Manta Block and Slab Saws
MK101 Pro Cutting Saw
• 24” blade capacity.
• Cuts 8” deep.
SPECIFICATIONS
Motor
Horsepower
Blade capacity
Arbor size
Depth of cut
Weight
Size
ITEM
MK
ITEM
MODEL
LX120TB
LX200TB
Manta TB120
Manta TB200
BLADE
SIZE
RPM
24”
24”
1,400
1,400
CUTTING
LENGTH
39”
78”
DESCRIPTION
PRICE
Cutting package with stand and 10” blade . . . .$1,170.00
MK 370 Tile Saw
UP &
DOWN
10”
10”
115V/60HZ
1-1/2 h.p. (Baldor/Leeson)
10”
3-3/4”
Rips 20” tile and 14” diagonally
125 lbs.
36”L x 23”W x 23”H
PRICE
SPECIFICATIONS
$2,950.00
$10,290.00
Motor*
Horsepower
RPM
Blade capacity
Arbor size
Depth of cut
Weight
Size
(mm)
Manta Aluminum Portable Tile Saws
115V/60HZ
_ h.p.
5500
7” (178mm)
5/8” (15.9mm)
2”–Rips 12” tile
Diagonally 10” (254mm)
25 lbs. (12 kgs)
28”L x 17”W x 19”H
(711 x 430 x 480)
*230 volt motor available upon request.
ITEM
PRICE
MK-370
$389.00
OPTIONAL
ITEM
MODEL
M85A
Manta 85
Saw stand
Cutting kit
Splash hood
BLADE
SIZE
RPM
CUTTING
LENGTH
UP &
DOWN
PRICE
12”
2800
33”
4”
$2,038.00
155953
155954
151924
See our
Equipment Section
for additional
Stone Working Equipment.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
55
SAWS
EASTERN MARBLE & GRANITE SUPPLY, INC.
MK 1070 Tile Saw
Porter Cable1500 Wet Cutting Tile Saw
SPECIFICATIONS
Motor
Horsepower
RPM
Blade capacity
Arbor size
Depth of cut
Plunge cut
Weight
Size
Part No.
ITEM
MK-1070
120V/60HZ
2 h.p.
11000
10”
(20mm)
2-1/4” (58mm) 90º,
1-1/8” (32mm) 45º
90º -3/8” ª35mm),
45º 1” (25mm)
8 lbs. (3.5 kgs)
10.5”L x 9”W x 7”H
155882
DESCRIPTION
• Powerful 7.4 amp AC motor.
• 7” premium diamond tile blade.
• Lightweight and portable for maximum versatility on the job site.
• Rip cuts 14” tile–Cuts 10” tile on a diagonal.
• Rugged, blow-molded tub with large water reservoir.
• Dual-track sliding table system provides accurate alignment during
cutting operations.
• Integral water feed system within blade guard provides superior
blade cooling and dust control.
• Table removes from unit for easy cleaning.
• Standard Equipment: Saw, premium diamond ceramic tile blade
#87027, water pump and operating manual.
PRICE
MK 1070 Tile Saw . . . . . . . . . . . . . . . . . . . . .$1,459.00
Combi 200 8” Portable Tile Saw
The most accurate lightweight tile saw made today. Designed and built
for many years of service. The COMBI 200 is as easy to handle by
the first timer as by the professional.
• Portability–only 53 lbs. yet very, very strong.
• Shatter resistant plastic water pan.
• Safe–runs only when button is engaged.
• Hi-torque direct drive motor delivers fast, chip free, cutting
performance.
87027–7” premium diamond ceramic
tile blade.
SPECIFICATIONS
5042–Stand for 1500 Tile Saw.
Model No.
Power
Motor Amps
Blade Size
Arbor Size
RPM
Water Capacity
Height
Width
SPECIFICATIONS
Blade guard capacity
8”
Blade shaft diameter
5/8”
Max. cutting length
17”
Max. cutting depth 90º/45º 1.6/0.8”
Cutting table dimensions
30”L x 20.5”W x 24”H
Weight (boxed)
53 (60 boxed) lbs.
Motor 110v/60hz
3/4 hp, 8 amp
Blade shaft speed
3,200 rpm
Water pan capacity
3 gal.
Water pump flow
3 gpm
Noise level
78 db
Length
30” (33.5)L x 20.5” (21) Wx 14” (14.5)H
(In box, larger in all dimensions)
1188076
8” Tile Saw 3/4 hp, 110w/17” cut
ITEM
IMER 200
DESCRIPTION
ITEM
P1500
DESCRIPTION
PRICE
Cutting saw with 7” blade . . . . . . . . . . . . . . . . .$432.00
PRICE
Combi 200 8” Portable Tile Saw . . . . . . . . . . . .$699.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
1500
120VAC
7.4
7”
5/8”
6,000
3 Gallons
24”
21”
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
56
SAWS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Combi 250 10” Tile and Stone Saw
MK-2000 Brick Saw
GENERAL SPECIFICATIONS
Blade Capacity
Arbor Size
Depth of Cut
Table Travel
Folding Stand
Power Cord
Adapter
Blade
Recommendations
This saw is ver y
rigid and accurate
with a high quality diamond blade. If poor
quality blades are used, they will flex while
running and cause inaccurate cuts.
If you are not sure which blade to use, call
an EMS technical advisor before the job
and the saw are damaged.
The Combi 250 is an affordable saw which
handles precision, chip-free cutting.
Excellent for tight fitting tiles. Easy to setup and simple to operate. Custom built
motor for smooth, clean cuts every time,
everyday.
• 1.5 hp motor that powers the 10” blade,
cuts marble and granite tiles accurately.
• Stainless steel cutting surface.
• Dual beam stainless steel travel bar for
smooth gliding cuts.
• Tough and durable construction.
Length of cut will travel 24”, will
handle large projects. Solid billet
aluminum protractor is locked in
place, accurately cuts angles,
diagonals. The combi 250 will
cut 24” tile or stone within
1/32”.
SPECIFICATIONS
Motor*/Engine
Horsepower
RPM
Weight
Size (LxWxH)
(mm)
Part No.
Price
MK-2001
14” (356mm)
1” (25.4mm)
5” (127mm)
29” (737mm)
151889 Optional
150960 Optional
MK-2002
115/230V 60 Hz
1-1/2 h.p.
3450
159 lbs. (72 kgs)
35” x 24” x 35”
(890 x 610 x 890)
150597
$1,650.00
115/230V 60HZ
2 h.p.
3450
170 lbs. (77 kgs)
35” X 24” X 35”
(890 x 610 x 890)
150598
$1,695.00
MK-2005-G
Honda GX160
5-1/2 h.p. Cyclone
2500
179 lbs. (81 kgs)
38” X 24” X 35”
(970 x 610 x 890)
155961
$2,449.00
*230 Volts 50Hz motors available upon request.
MK-1080 Paver Saw/Brick Saw
SPECIFICATIONS
Motor*
Horsepower
Blade Capacity
Arbor Size
Depth of Cut
Length of Cut
Weight
Size (LxWxH)
(mm)
45º miter cuts are quick and simple,
no accessory package needed.
Stainless steel cutting surface,
aircraft quality materials provide a
rigid, lightweight saw that will retain
its finish for many, many years.
115V/60 Hz
1-1/2 h.p.
10” (254mm)
5/8” (15.9mm)
3_” (83mm)
11” (279mm)
87 lbs. (39.5 kgs)
29” x 20” x 24”
(740 x 510 x 610)
*230V 50Hz motors available upon request.
The water pump comes on auto matically when the motor is run ning. It is wired directly to the
on/off switch. No need to find a
plug receptacle for the pump line.
To clean the pump, pop open the
specially machined trap door.
ITEM
MK-1080
DESCRIPTION
PRICE
MK-1080 Paver/Brick Saw . . . . . . . . . . . . . . .$1,179.00
OPTIONAL
Stand (optional –the tube stand is
light and its design provides a ver y
stable work platform).
Folding Stand
On/Off Foot Switch
151889
153567
SPECIFICATIONS
Blade diameter
Blade shaft diameter
Max. cutting length
Max. cutting depth 90º/45º
Cutting table dimensions
Weight (boxed)
Motor rating
Blade speed
Water pan capacity
Water pump flow
Noise level
Length
1188189K
Includes blade and stand.
ITEM
IMER 250
10”
5/8”
24”
2-1/2”/1-1/4”
36” x 20”
100 (108) lbs.
1-1/2 hp
3200 RPM
10 gals.
3 gpm
78 db
41”L x 24”Wx 17”H
10” Tile and Stone Saw
DESCRIPTION
PRICE
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Combi 250 10” Tile and Stone Saw . . . . . . . . .$1,099.00
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
57
SAWS
EASTERN MARBLE & GRANITE SUPPLY, INC.
MK-5000 Block Saw
Accuglide Walk Behind Handle
• Optional 24” blade guard assembly is available.
• 50 Hz and special voltage requirements available on request.
Stay off your knees! Trim tile in place, cut inlays, expansion and control joints with perfect precision. Optional interlocking tracks and
water misting tips available.
• Attaches to Accuglide saws.
This extremely high degree of accuracy on seam cuts. . . the
ease and rapidity of cut setups lends itself to increased production as well as reduced labor costs per shift.”
SPECIFICATIONS
MK-5005-S
MK-5005-T
Motor
230V/60Hz
Single Phase
5 h.p.
445 lbs.
154638
$3,695.00
240V/60Hz*
3-Phase
5 h.p.
451 lbs.
154643
$3,795.00
Horsepower
Weight
Part No.
Price
SPECIFICATIONS
MK-5007-T
MK-5008-GH
Motor
240V/60Hz*
3-Phase
7.5 h.p.
485 lbs.
154644
$4,195.00
Honda w/cyclone filter
4 Stroke Gas
8 h.p.
498 lbs.
155962
$4,195.00
Horsepower
Weight
Part No.
Price
*460V 3-Phase available. MK-5005T #154647, MK-5007T #154648
ITEM
IH300
DESCRIPTION
PRICE
Handle Only . . . . . . . . . . . .$375.00
Accuglide Bevel 2500QT Model
Designed to accommodate a standard blade or our exclusive 7”.
Advantages of optional profile wheel.
• Produces 1/8” to 3/4” CNC quality bevels on two sides (V-shaped
45º cut) in one cut setup!
• Delivers perfect 1/2” bevels at 2’ a minute, chip free.
• For granite, marble and limestone.
Our patented tracking system = Perfect stability without clamps or
suction cups!
MK-70 Hand Held Saw
SPECIFICATIONS
Motor
RPM
Blade capacity
Arbor size
Depth of cut
Plunge cut
Weight
Size
(mm)
Part No.
120V 60 Hz
11000
4” (102mm)
(20mm)
2-1/4” (58mm) 90”,
1-1/8” (32mm) 45º
90º 1-3/8” (35mm),
45º 1” (25mm)
8 lbs. (3.5 kgs)
10.5”L x 9”W x 7”H
(270 x 230 x 180)
151325
Sets up in 15 seconds. Set the
neoprene lined rack into cutting
position with the two calibration
indicators.
ITEM
BQTIT
ITEM
DESCRIPTION
MK-70
MK-70 Hand Held Saw . . . .$149.00
PRICE
DESCRIPTION
7’6” track . . . . . . . . . . . .$3,290.00
PRICE
Alpha Wet Cutting Circular Saw
2000QT Accuglide Saws
Accuglide Stonesaw
• Proven trouble-free system since 1996.
• Seam quality cuts at 2’-3’ a minute.
• QT Hub = 30-40% sound reduction.
• Glides 3/8” above the stone.
• Guaranteed scratch free • Cuts 1/4” from edge.
• Switch from an 11’ cut to a 2’ cut in 30 seconds.
ITEM
ITEM
DESCRIPTION
PRICE
QT121
QT75R
12’6” track ss. rack . . . . .$2,890.00
7’6” track . . . . . . . . . . . .$2,840.00
AWS-110
PRICE
DESCRIPTION
13,000 rpm, 11.2 amps . . . . . . . . .$128.80
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
58
SAWS
EASTERN MARBLE & GRANITE SUPPLY, INC.
Gemini Tile Shaper Ring Saw
Trac Star 2000
SPECIFICATIONS
Drive Motor
Blade
Controls
Weight
Warranty
1/5 horsepower, 110 Volt, 60 Hz
220 Volt, 50 Hz with transformer
5-3/4” diamond coated stainless
steel, .050-80 grit
on/off switch
11 pounds
2 years
ITEM
PRICE
This portable sawing system cuts straight, smooth and deep–
automatically!
The Trac Star 2000 portable sawing system from intertool is designed
for the precision cutting of stone slab material. It also works great for
scoring or cutting concrete surfaces. The saw operates on a V-groove
track and is automatically drawn down the track by a variable speed,
front wheel drive motor. The drive motor permits the speed of the saw
to be matched to the hardness of the surface to be cut, ensuring more
efficient and effective cutting. Set-up is easy since the blade is precalibrated to cut 1 inch from the edge of the track. Simply align the
track on the surface, place the Trac Star 2000 on the track, and you’re
ready to cut! A standard 8 inch blade will cut 2-1/4” deep with the
Trac Start’s powerful 110V, 18.8 amp, 1-1/2 HP “washdown” motor.
The motor runs at 1725 rpm, produces as remarkable 4-1/2” ft. lbs. of
torque, and is backed by a one year warranty. The Trac Star 2000
comes with 3 rail lengths–4-1/2’, 7’ and 12’.
The best portable saw on the market!
RING SAW . . . . . . . . . . . . . . . . . . . . .$525.00
Accuglide Bridge Accessory
Converts any rack to a bridge saw with the following advantages for
tile and stone:
• Parallel Fence–cuts three 24” x 24” large format tiles.
• 35” stainless crosscut fence with universal stop gauge.
• Fully adjustable, versatile and accurate.
• Easy backsplash cutoffs for stone.
• Fast multiple tile angle cuts.
• 1 cm to 5 cm cut depth.
Production = Profit.
The AccuGlide Stone Saw is lightweight, yet has ample power to deliver precision cuts quickly. Operators move from one cut setup to the
next with speed and minimal fatigue. The vital feel of the cutting operation is not lost with the AccuGlide Sawing System. The operator
knows how the blade is cutting at all times and can speed up or slow
down accordingly. Maximum production is easily achieved compared
to other “portable” systems.
ITEM
BB150
PRICE
ITEM
TS2000
PRICE
. . . . . . . . . . . . . . . . . . .$3,750.00
Gemini Revolution
Use the revolution for cutting a straight line, radius or shape.
. . . . . . . . . . . . . . . . . . . . .$545.00
SPECIFICATIONS
Motor
Blade
Weight
Warranty
1/3 h.p., high torque, water
resistant, 115 volt
10” diameter diamond ring
29 pounds
2 years
ITEM
PRICE
REVOLUTION . . . . . . . . . . . . . . . . . . . . . . . . . . $1,595.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
59
EQUIPMENT
EASTERN MARBLE & GRANITE SUPPLY, INC.
MANTELLO
B-5–SSGT Bridge Saw
View of Tilt Table Adjusted
from 0º-90º Capability
Features: • 20 HP Blade Motor • Variable Speed/Forward and Reverse • Bridge Tilt to 45º • 11.5 ft. Cutting Length
• 360º Table Rotation (w/two leg stops) • Air Brake for Table Lock/Any Position • Digital Readout • Motorized Left and Right
• Tilting Table • Self Lubricating Bearings/on rails • High Quality Stainless Steel Covers. • Remote Control Panel
Special Options: • Drill/Router (for Profiling and Coring) • Laser • Programmable Next Cut (up to 40 Settings) • 12” Granite
Blade.
MANTELLO
MANTELLO
B-8
Single Head Profile and Polishing Machines
Features:
• 4 HP Bullnose Motor
• Digital Readout for Profile Settings
• Drill/Router for Coring and Profiling
• 7.5 HP Blade Motor for Cutting
Rounds
• Vacuum Hold Down for Round Cuts
and Profiling
• 11.5 ft. Cutting & Profiling System
• 5 Step Polishing System
Economical Version of the B8
• Pneumatic Squaring Arm
• Movable Bridge for Easy Squaring
• Remote Satellite Control
• Variable Speed/Fwd Rev
• Solid Uniblock Construction
• Self-Lubricating Bearings on Rails
• Mixed Aluminum Table with Rubber
Non-Scratch Pads
• Full Set of Grinding and Polishing
Wheels
MANTELLO
Tile & Slab Line
Machine
B-7
This machine comes with all the features of the B8, except for the round
cutting features. The B7 moves faster for greater productivity • Drill
/Router for shapes other than Bullnose. Options available upon request.
Call for Pricing.
• Custom Built for your needs.
• For Slab Calibration (1, 2 or 3 Heads)
and Polishing Heads (up to 18”).
• Available w/either Frankfort or Fickert.
Call for Pricing on Custom Machines.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
60
EQUIPMENT
EASTERN MARBLE & GRANITE SUPPLY, INC.
MANTELLO SLUDGE
COLLECTOR
COCH PRM-50 Bowl
Hole Drilling, Milling and
Polishing Machine
Water
Filtration,
Recycling
System
Efficiently cleans system. . . removes sludge and recycles water
• 5 bag filtration system • Adjustable water flow valves • 1.5 HP pump
motor • Automatic heat shut off • Bag cart for easy removal of full
bags • Automatic shutoff float system.
Call for Pricing.
MANTELLO
Inline Edger
• Custom Built. Specifically for your needs. This machine can do
straight edges, bevels and rounds. • Adjustable Belt Speed • Up to
2.5” Thickness • High Quality Finish.
COCH
PRM-50 Sink
Hole Drilling, Milling and
Polishing Machine
• Quick change tool holders.
• Template profile copier.
• 4 HP (3k/w) electric motor
with electronic variable speed
from 300 to 4500 RPM.
• Two vertical improvements.
• Pneumatic disk brakes lever
arm.
• 2” x 5’6” (600 x 1700 mm)
work area.
• 6’6” (2000 mm) variable speed
motorized worktable.
• Tooling Separate.
Call for Pricing.
FUNDISA
SP450 Economical
Bridge Saw
Call for Pricing on Custom Machines.
MANTELLO
Radial A rm Bed Po l i s h e r
• Arm Span 7’ • 4 Hp 2 Speed Motor • Excellent for Honing and
Polishing Superior for Polishing Marble and Granite • Center Water
Feed • Adjustable Up and Down • Comes with 5 Plates. • Air
Assisted Down Pressure Available Upon Request.
www.easternmarble.com
• Quick change tool holders.
• Template profile copier.
• 4 HP (3k/w) electric motor with
electronic variable speed from
300 to 4500 RPM.
• Two vertical improvements.
• Pneumatic disk brakes lever
arm.
• 2” x 5’6” (600 x 1700 mm)
work area.
•Tool Separate.
Call for Pricing.
• Motor Gantry movement.
• 12.5 HP blade motor.
• Variable speed forward
and reverse.
• 45º blade tilt.
• Holds up to 18” blade.
• Tilting table.
• 360º manual table rotation w/8 locking positions
10.5” cutting length.
• 12” granite blade.
• Self lubricating bearings/on rails.
• Digital readout.
• Laser/optional.
• Available on steel frame
or can be mounted on
block walls.
Call for Pricing.
EASTERN MARBLE & GRANITE SUPPLY, INC. •
TECHNICAL SPECIFICATIONS
Vertical stroke
Inclination Angle
18 cm
45º
Table dimensions
Max. cutting depth
Motor power
Bridge Speed
Forward speed
Dimensions: Large
Medium
Small
300 x 185 cm
450 mm
15 hp
4/0.4 mt/1’
0-6 mt/1’
550 cm
500 cm
240 cm
1-800-643-8818
61
EQUIPMENT
EASTERN MARBLE & GRANITE SUPPLY, INC.
MANTA 200/250/300 ECONOMICA
Mini-Bridge Saw
• Semi-Automatic, motorized variable speed cutting.
• Marine plywood decking.
• Minor assembly required (leg mounting only).
• 3.5 HP blade motor.
• Blade tilts 45º to 90º.
• Motorized up and down.
• Front and side squaring bars.
• 2 side tables (20” x 40” with rollers.
• Additional side tables optional.
• Eco 200 cutting length 6’-6”.
• Eco 250 cutting length 8’.
• Eco 300 cutting length 9’-6”.
Call for Pricing.
ITAL-MECC Air-3
with Bench and Movable Suction Nozzles
The Air-3 with bench and movable suction nozzles is truly a superior dust collecting machine. Possessing great maneuverability and versatility, the Air-3 when
used with the movable suction nozzles is perfect for sculptors and others who
are used to working freely.
Using a rubber hose the Air 3 nozzles are installed on wheels, giving them the ability to be rotated in all directions. The power and speed with which it vacuums
large amounts of dust is astounding. The nozzles are very useful for picking up
dust not caught by the bench.
Call for Pricing.
Air-3
ITAL-MECC Air-3
Dust Collectors
Self-Cleaning System
The new Air-3 SelfCleaning System
drastically diminishes
time spent on maintenance with the assurance that purification
will be excellent.
Appropriate nozzles,
powered by the water
system of the plant,
wet the dust causing
TECHNICAL DATA
it to fall to the bottom. Drainage of
the purification is always open and it Motor
makes the dirty water flow out conSuction
tinuously avoiding the accumulation
Noise
of mud on the bottom of the unit.
Call for Pricing.
3 HP
2Kw
12000- m3/h
70 Decibel (A)
Number One in Dust Collecting.
The Air-3 Dust Collector is built with stainless steel making it virtually
indestructible. With 15 years of development and improvements the
Air-3 Dust Collector has grown into an excellent machine. The highly
effective system is the best on the market. With no filters, pumps, or
nozzles the system, is both noiseless and maintenance free.
Customers have the option to include a system that will signal when
it is time to add water and/or when it is time to discharge the
sludge. Currently there are three electric systems available, each one
with different functions. All three conform to EEC regulations.
Air-3 With Supports for Bowl Hole Finishing.
All of the Air-3 workbenches are designed for bowl hole finishing
applications popular in bathroom and kitchen tops. These userfriendly benches are mobile and easily adjusted in height. This
model includes two shelves for holding the marble and a workbench
with a protective water resistant epoxy finish.
Call for Pricing.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
62
EQUIPMENT
EASTERN MARBLE & GRANITE SUPPLY, INC.
ITAL-MECC
ITAL-MECC Air-3
Sludge Dehydrator
With Crosswise Bench
The Crosswise Bench reduced size
makes it easy to work on both short
sides of the bench. The Air-3 counters can be installed in either longitudianl or transversal positions.
Call for Pricing.
ITAL-MECC Baby Air
Self Cleaning Water Suction Bench
Economic, Useful and Practical.
The Economy Sludge Dehydrator built
in stainless steel can be installed for
both indoor and outdoor shops. The
Dehydrator is the most economic
system for eliminating sludge from
the decantation tank. The Sludge
Dehydrator makes the sludge solid
enough to be shoveled while at the
same time conforming the waste to
pollution regulations.
TECHNICAL DATA
Width
Height
Depth
Weight
Pump Motor
280 cm.
60 cm.
200 cm.
260 Kg.
1 HP
Call for Pricing.
Laser Blazer
The Baby Air Dust Collector is small and silent with low consumption.
Using water to cleans the air this Baby is perfect for small workshops. The Baby is both economic in price and consumption.
Call for Pricing.
The laser blazer is an aid for laying out your cutting. The laser blazer
is mounted on the arm above the saw using a mounting bracket.
WARRANTY
Laser–Technical Instruments, Inc. products are warranted against
defects for a period of 18 months from date of delivery (for full
warranty statement, refer to Operating and Maintenance manual).
REPAIR SERVICE
Factory repair service is fast–turnaround, low in cost, and offers a
15-month warranty on repairs.
SAFETY
All Laser Blazer products conform to the regulations of the USDHHS,
the U.S. Government agency which controls the use of lasers; and
are certified to Canadian Standards Association code.
ITAL-MECC Air Box
Self-Cleaning or with
Recycled Water
Cabin built in stainless steel with an
Innovative system of dust damp ening through atomized water.
Low maintenance, low consumption and good suction: what more
can you ask for?
The Air Box Dust Collector takes up
TECHNICAL DATA
very little space, is silent and
gives the operator maximum free - Width
dom of movement. Extensions for Height
sidewalls and roof supplied on
Depth
request.
Weight
Call for Pricing.
Pump Motor
Fans Motor
Suction
www.easternmarble.com
SPECIFICATIONS:
300 cm.
75 cm.
200 cm.
400 Kg.
1 HP
5 HP
3.7 Kw
12000 m3/h
Standard Voltage:
Available Voltage:
Power Output:
Light Source:
Power Consumption:
Diameter:
Length:
Weight:
Fan Angle:
115V AC, 50/60 Hz
230V AC
5 milliwatts, pure red light
Helium-Neon Laser
Less than 50 watts
2.25 inches
25 inches
6.5 lbs.
90 degree fan angle standard
MOUNTING BRACKET
Length: 18 inches
Width: 3 inches
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
63
Height: 3.6 inches
EASTERN MARBLE & GRANITE SUPPLY, INC.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
EQUIPMENT
1-800-643-8818
64
SAFETY
EASTERN MARBLE & GRANITE SUPPLY, INC.
3M 8210 N95 Particulate Respirator
• Reliable worker protection against certain non-oil based particles.
• Can be used during grinding, sweeping, sanding, bagging and other
dusty operations.
ITEM
DESCRIPTION
DUST MASK
EQUIPMENT
3M 1100 Expandable Foam Ear PlugsCorded
• Noise reduction rating of 29dB.
• Soft braided cord provides worker comfort and helps prevent loss.
• Smooth dirt resistant surface, tapered design to fit the ear canal,
provide added comfort and hygiene.
• Hypo-allergenic material.
• Hearing protection in shop environments.
• Each box contains 100 pairs, and each package is easy to dispense.
PRICE
Particulate respirator . . . . . . . . . $17.00/box of 20
3M 8511 N95 Particulate Respirator
• Cool Flow valve makes it comfortable in applications in which heat
and humidity are present.
• Lightweight construction.
• M-noseclip.
ITEM
EAR PLUG 1
DESCRIPTION
PRICE
Expandable foam ear plugs . . $25.00/box of 100
3M Sting-Rays Protective Eyewear, 1710
• Contemporary-styled frames.
• Side and brow protection.
• Lens is made of durable, hard-coated polycarbonate.
ITEM
DESCRIPTION
DUST MASK 1
PRICE
8511 particulate respirator . . . $17.75/box of 10
ITEM
3MSR
DESCRIPTION
PRICE
Sting-Rays protective eyewear . . . . . .
$3.95
3M 1100 Expandable Foam Ear Plugs
• Noise reduction rating of 29 dB.
• Smooth dirt resistant surface, tapered design to fit the ear canal,
provide added comfort and hygiene.
• Hypo-allergenic material.
• Each box contains 200 pairs and each package is easy to dispense.
ITEM
EAR PLUGS
DESCRIPTION
3M Perforated Safety Goggles, 1620
• Soft and comfortable with flexible vinyl frames.
• General-use goggles.
• Should not be worn in areas where chemical splashes and fumes
may be present.
PRICE
Foam ear plugs . . . . . . . . . . . $19.50/box of 200
ITEM
SAFETY G
DESCRIPTION
PRICE
Perforated safety goggles . . . . . . . . . . . .$4.80/each
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
65
EASTERN MARBLE & GRANITE SUPPLY, INC.
SAFETY
EQUIPMENT
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
66
FLOOR
EASTERN MARBLE & GRANITE SUPPLY, INC.
RESTORATION
Clarke Encore Scrubber and Polisher
Clarke MP-18 Marble Polisher
• For marble, limestone and terrazzo.
• Good combination between weight and pad speed.
• Can be used as stripping machine.
• Includes diamond pad driver, pad driver and water tank.
ITEM
DESCRIPTION
PRICE
ENCOREL28 With 2 pad drivers . . . . . .$10,719.00
V261XPH14 Diamond pad drivers . . . .$278.00 ea.
Requires (2)
ITEM
DESCRIPTION
MP18-4
Marble polisher . . . .$2,300.00
PRICE
SPECIFICATIONS
Pad diameter
Pad speed
Motor
Power cable
Gearbox
Weight
Warranty
18” (45.72 cm)
175 RPM
1.5 HP, 15 AMPS, 115/220 Volt
50’ 3-wire grounded
Triple Planetary, dual capacitor
136 lbs. (61 kg.)
1 year
Granite Polisher GP-18
• Strong 208V motor.
• Well balanced.
• Proper weight for polishing of granite floor.
• Can be used on both–granite or marble.
• Extremely durable.
ITEM
DESCRIPTION
GP-18
Granite polisher . . . .$3,300.00
PRICE
SPECIFICATIONS
Pad diameter
Pad speed
Motor
Power cable
Gearbox
Weight
Warranty
18” (45.72 cm)
175 RPM
2.2 HP, 12 AMPS, 208 Volt
50’ 3-wire grounded
Triple Planetary
190 lbs. (86 kg.)
1 year
SPECIFICATIONS
Model
Power Supply
Charger
Motor, vacuum
Motors, brush
Motor, traction
Drive wheels
Brush size
Brush speed
Brush pressure
Solution tank
Recovery tank
Speed, forward
Speed, reverse
Length
Width
Height
Weight
Warranty
L28
36 volt (6-6 volt batteries)
370 AH
36 volt, 25 amp, 115V/60Hz,
or 230V/50Hz
1 hp, 3 stage, tangential
.75 hp DC
.5 hp transaxle
2-pneumatic (4.10/3.50-6) with sealant
2-14” with 1/2” overlap
200 RPM
120-220 lbs.
30 gallon with in-line filter
30 gallon with electronic float shut-off
Variable to 230 ft/min
Variable to 180 ft/min
62.5”
Machine 28”, Brush Housings 30”, Squeegee 39”
44”
1,018 lb.
Machine–1 year, Brush Motors–2 years,
Polydur Tanks–2 years,
Batteries–18 months pro-rated
Clarke Wet and Dry Tank Vacuums
Eastern Marble and Granite Supply, Inc.
is Proud to Announce
Marble Floor Restoration I
An Introductory Seminar
• Hands-on Workshop • Marble Restoration
• Honing • Polishing
• Sealer Application • Stain Removal
• Equipment Operation
• Removing Etching and Water Rings
• Blending Edges • Polishing Methods
• Lippage Removal • Quick Polishing Techniques
Only $325 Per Person
www.easternmarble.com
SPECIFICATIONS
Motor (115 Volt and 230 Volt)
CFM
Hose adapter
Tank size
Power cable
Tool kit
Applications
Weight
Price
CTV-15
CTV-7
1 HP
120 CFM
1-1/2”
15 gallon
50’
Standard
Wet/Dry
48 lbs.
$477.00
1 HP
72 CFM
1-1/4”
7 gallon
20’
Standard
Wet/Dry
16 lbs.
$231.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
67
FLOOR
EASTERN MARBLE & GRANITE SUPPLY, INC.
RESTORATION
Tec Plate
Nu-Source Wet Dry Vac
The “Tec Plate” is used with the SoftCut diamond discs for delipping
or flattening.
ITEM
TP
TP20
ITEM
DESCRIPTION
PRICE
P25WD
Wet Dry Vac w/wand and squeege . . . . . . . . . . . . . . . .$360.00
DESCRIPTION
MP18-3
MP18-3A
MP18-2
17” Tec Plate
20” Tec Plate
TURBOCAT 3” for Marble and Terrazzo
PRICE
Diamond Driver . . . . . . . . .$219.00
Diamond Deluxe . . . . . . . .$345.00
Pad Driver . . . . . . . . . . . . .$100.00
Full Face Metal Bond Delipping Discs
ITEM
DESCRIPTION
46 METAL
70 METAL
3”–46 Grit
3”–70 Grit
ITEM
DESCRIPTION
TC3X0030BR
TC3X0050BR
TC3X0100BR
3”–Grit 30 . . . . . . . . . . .$56.00
3”–Grit 50 . . . . . . . . . . .$52.00
3”–Grit 100 . . . . . . . . . .$52.00
ITEM
PRICE
SOFTCUT 50 . . . . . . . . . . . . . . . . . . . . .$59.50
SOFTCUT 120 . . . . . . . . . . . . . . . . . . . .$59.50
SOFTCUT 220 . . . . . . . . . . . . . . . . . . . .$59.50
SOFTCUT 400 . . . . . . . . . . . . . . . . . . . .$59.50
SOFTCUT 600 . . . . . . . . . . . . . . . . . . . .$59.50
PRICE
$90.00
$90.00
Delipping Plates
Delipping plates are used to remove lippage and make the stone surface flat for polishing.
A. Granite Delipping Plate–Available in position 1 and position 3.
Granite
IGP1
IGP3
IS1
IS3
IBP
DESCRIPTION
PRICE
18” assembled plate with . . . . . . . .$630.00
6 position 1 segment
18” assembled plate with . . . . . . . .$630.00
6 position 3 segments
Position 1 replacement segment . . .$90.00
Position 3 replacement segment . . .$90.00
18” replacement plate . . . . . . . . . . .$90.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
PRICE
Softcut 3-1/2” Metal Discs for Granite,
Marble, Limestone and Terrazzo
• For fast lippage removal.
• Guaranteed long life on marble, limestone and terrazzo.
• Make the floor flat!
ITEM
PRICE
$48.00
$64.50
• Vacuum brazed.
• Very fast lippage removal on marble and terrazzo.
• Long lasting • Cost effective.
Clarke Diamond Pad Driver
ITEM
DESCRIPTION
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
68
FLOOR
EASTERN MARBLE & GRANITE SUPPLY, INC.
Italian Craftsman Marble Floor Discs
ITEM
ICFD50M
ICFD100M
ICFD200M
ICFD400M
ICFD600M
DESCRIPTION
PRICE
50 Grit . . . . . . . . . . . .$39.70
100 Grit . . . . . . . . . . .$39.70
200 Grit . . . . . . . . . . .$39.70
400 Grit . . . . . . . . . . .$39.70
600 Grit . . . . . . . . . . .$39.70
Triple Thick Resin Bond Floor Polishing
Discs–3”
• High Quality Polishing.
• Thickness–7mm.
• Low cost per square foot.
Resin Bond Marble Floor Polishing Discs–
’Spiral’-3”
• High quality polishing.
• Chamfered on the edge.
• Thickness–7mm.
RESTORATION
ITEM
DESCRIPTION
TT50
TT120
TT220
TT400
TT600
TT800
TT1800
TT3500
TT8500
Grit 50
Grit 120
Grit 220
Grit 400
Grit 600
Grit 800
Grit 1800
Grit 3500
Grit–8500
PRICE
Green . . . . . .$21.00
Black . . . . . .$21.00
Red . . . . . . .$21.00
Yellow . . . . .$21.00
Brown . . . . .$21.00
White . . . . . .$21.00
Blue . . . . . . .$21.00
Gray . . . . . . .$21.00
Purple . . . . .$21.00
Italian Craftsman Copper Granite
Floor Discs
ITEM
S50
S120
S220
S400
S600
S800
S1800
S3500
S8500
DESCRIPTION
PRICE
3 ”–Grit 50 . . . . . . . . . . .$20.00
3 ”–Grit 120 . . . . . . . . . .$20.00
3 ”–Grit 220 . . . . . . . . . .$20.00
3 ”–Grit 400 . . . . . . . . . .$20.00
3 ”–Grit 600 . . . . . . . . . .$20.00
3 ”–Grit 800 . . . . . . . . . .$20.00
3 ”–Grit 1800 . . . . . . . . .$20.00
3 ”–Grit 3500 . . . . . . . . .$20.00
3 ”–Grit 8500 . . . . . . . . .$20.00
ITEM
ICFD 30C
ICFD 50C
ICFD 100C
B50050
B50120
B50220
B50400
B50600
B50800
B51800
B53500
Grit 50
Grit 120
Grit 220
Grit 400
Grit 600
Grit 800
Grit 1800
Grit 3500
Generic Resin Bond Floor Polishing
Discs–3” Turbo Style
DESCRIPTION
ICFD 100R
ICFD 200R
ICFD 400R
ICFD 800R
ICFD 1500R
ICFD 3000R
PRICE
Green . . . . . . . .$27.00
Black . . . . . . . . .$27.00
Red . . . . . . . . . .$27.00
Yellow . . . . . . . .$27.00
Brown . . . . . . . .$27.00
White . . . . . . . .$27.00
Blue . . . . . . . . .$27.00
Gray . . . . . . . . .$27.00
30 Grit . . . . . . . . . . . . . .$82.00
50 Grit . . . . . . . . . . . . . .$82.00
100 Grit . . . . . . . . . . . . .$82.00
ITEM
• Velcro backed.
• Quick change.
DESCRIPTION
PRICE
Italian Craftsman Resin Granite
Floor Discs
Resin Bond “Frankfurt” for Marble
ITEM
DESCRIPTION
PRICE
100 Grit . . . . . . . . . . . . .$52.50
200 Grit . . . . . . . . . . . . .$52.50
400 Grit . . . . . . . . . . . . .$52.50
800 Grit . . . . . . . . . . . . .$52.50
1500 Grit . . . . . . . . . . . .$52.50
3000 Grit . . . . . . . . . . . .$52.50
Frankfurt Wire Brushes
ITEM
DESCRIPTION
FWB46
FWB80
FWB120
FWB240
FWB500
46 Grit . . . . . . . . . . . . . .$45.00
80 Grit . . . . . . . . . . . . . .$45.00
120 Grit . . . . . . . . . . . . .$45.00
240 Grit . . . . . . . . . . . . .$45.00
500 Grit . . . . . . . . . . . . .$45.00
PRICE
Pirahna Discs–Pirahna System for Marble
and Granite Floors
• Color coded.
• Thickness–3mm.
• High quality polishing.
3-1/2” velcro backed discs available in the following grits, copper
plastic bond–30, 100, 200, 400, 600 and 800 and1800.
ITEM
DESCRIPTION
GN1350
GN13120
GN13220
GN13400
GN13600
GN13800
GN131800
GN133500
GN138500
Grit 50
Grit 120
Grit 220
Grit 400
Grit 600
Grit 800
Grit 1800
Grit 3500
Grit 8500
PRICE
Green . . . . . . . .$15.00
Black . . . . . . . . .$15.00
Red . . . . . . . . . .$15.00
Yellow . . . . . . . .$15.00
Brown . . . . . . . .$15.00
White . . . . . . . .$15.00
Blue . . . . . . . . .$15.00
Gray . . . . . . . . .$15.00
Purple . . . . . . . .$15.00
www.easternmarble.com
ITEM
DESCRIPTION
09010RWE-1
09013RWE-1
09022RWE-1
09024RWE-1
09028RWE-1
09030RWE-1
09031RWE-1
Grit 30 . . . . . . . . . . . .$46.00
Grit 100 . . . . . . . . . . .$46.00
Grit 200 . . . . . . . . . . .$46.00
Grit 400 . . . . . . . . . . .$46.00
Grit 600 . . . . . . . . . . .$46.00
Grit 800 . . . . . . . . . . .$46.00
Grit 1800 . . . . . . . . . .$46.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
PRICE
69
EASTERN MARBLE & GRANITE SUPPLY, INC.
FLOOR
RESTORATION
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
70
EASTERN MARBLE & GRANITE SUPPLY, INC.
FLOOR
RESTORATION
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
71
FLOOR
EASTERN MARBLE & GRANITE SUPPLY, INC.
Baby-Roc™ Diamond Discs
For Stone, Glass and Composites.
Baby-Rok™ brand diamond discs are designed for surface grinding.
They grind almost any edge of incredible stock removal rates, leaving a completely smooth finish. These discs are ideal for removing
deep scratches in stone, glass or composites left by saw blades
during the cutting process.
RESTORATION
Milwaukee Variable Speed Dry Right
Angle Grinder/Polisher–Electric
• For use with spray bottle.
• Variable speed, 0-2800 RPM.
• 5/8”-11 thread.
• Weight, 9 lbs.
• 110 volt.
ITEM
DESCRIPTION
PRICE
M5540 Milwaukee VS right angle polisher .$295.00
ITEM
DESCRIPTION
PRICE
3” Baby-Roc™ Velcro Backed, 4000-8000 RPM
R30303
3” Baby-Roc, 1-1/4” hole, 30 grit, Blue . . . . . . .$33.00
R3030
3” Baby-Roc, 1-1/4”, 50 grit, Orange . . . . . . . . .$29.00
R3031
3” Baby-Roc, 1-1/4”, 70 grit, Grey . . . . . . . . . .$20.30
R3032
3” Baby-Roc, 1-1/4”, 120 grit, Black . . . . . . . . .$17.40
R3033
3” Baby-Roc, 1-1/4”, 220 grit, Red . . . . . . . . . .$14.50
R3034
3” Baby-Roc, 1-1/4”, 400 grit, Brown . . . . . . . .$13.70
R3035N
3” Baby-Roc, 1-1/4”, 600 grit, White . . . . . . . . .$13.70
4” Baby-Roc™ Velcro Backed, 3000-6,000 RPM
R40303
4” Baby-Roc, 2-1/4” Hole, 30 grit, Blue . . . . . . .$57.00
R4030
4” Baby-Roc, 2-1/4” Hole, 50 grit, Orange . . . . .$51.00
R4031
4” Baby-Roc, 2-1/4” Hole, 70 grit, Grey . . . . . . .$35.00
R4032
4” Baby-Roc, 2-1/4” Hole, 120 grit, Black . . . . .$30.00
R4033
4” Baby-Roc, 2-1/4” Hole, 220 grit, Red . . . . . .$25.00
R4034
4” Baby-Roc, 2-1/4” Hole, 400 grit, Brown . . . .$23.90
R4035N
4” Baby-Roc, 2-1/4” Hole, 600N grit, White . . . .$23.90
5” Baby-Roc™ Velcro Backed, 2500-5,000 RPM
R50303
5” Baby-Roc, 2-3/4” Hole, 30 grit, Blue . . . . . . .$99.00
R5030
5” Baby-Roc, 2-3/4” Hole, 50 grit, Orange . . . . .$80.00
R5031
5” Baby-Roc, 2-3/4” Hole, 70 grit, Grey . . . . . . .$56.00
R5032
5” Baby-Roc, 2-3/4” Hole, 120 grit, Black . . . . .$48.00
R5033
5” Baby-Roc, 2-3/4” Hole, 220 grit, Red . . . . . .$40.00
R5034
5” Baby-Roc, 2-3/4” Hole, 400 grit, Brown . . . .$38.00
R5035N
5” Baby-Roc, 2-3/4” Hole, 600N grit, White . . . .$38.00
Abrasive Technology Polishing Pads
Floormaster™
Abrasive Technology’s Newest Innovation in Stone Working Tools.
Floormaster™: The new leader in diamond floor polishing tools.
Floormaster™ was designed specifically for the floor restoration professional.
Floormaster™ has a full 1/4 inch thick diamond impregnated segment base
offering you extended life on granite, marble, limestone, travertine and
terrazzo. This superb tool offers a thick non-abrasive poly-resin bonded
support plate for maximum durability. It will easily adapt under any type or
make of floor machiner y.
Floormaster™ will deliver consistent glossy finishes under adverse conditions
and was designed to withstand severe abuse, including lippage. Use the
Floormaster™ with or without on ATI TechPlate™.
ITEM
7750
7751
7752
7753
7754
7755
7756
7757
7758
DESCRIPTION
Suhner Polisher–Electric
• Combination grinder and polisher.
• Speed, 2000 RPM.
• 5/8”-11 thread.
• Weight 7 lbs.
• 110 volt, 5 amps/7amps.
• Double insulated.
• Center water feed.
ITEM
DESCRIPTION
UWD2N
2000 RPM right angle polisher . . .$315.00
PRICE
Flex Dry Variable Speed Polisher
LK603VV–Heavy-duty electronic variable speed polisher
New and improved electronic precision machine for all demanding polishing
applications.
• Powerful 10 amp motor with overload protection and soft-start.
• Electronic dial speed control for constant RPM’s under differing loads.
• 1000-3000 RPM.
• Plastic gear housing cover and padded rest to protect work surface.
• Spindle lock for easy pad changes.
• Comfortable, lock-on trigger switch.
• 5/8”-11 spindle.
ITEM
DESCRIPTION
LK603VV Flex variable speed polisher . . . . .$235.00
PRICE
3” Floormaster #1-30 Grit Lt. Green . . .$30.00
3” Floormaster #2-50 Grit Dk. Green . .$30.00
3” Floormaster #3-120 Grit Lt. Black . .$30.00
3” Floormaster #4-220 Grit Lt. Red . . .$30.00
3” Floormaster #5-400 Grit Lt. Yellow . .$30.00
3” Floormaster #6-800 Grit Lt. White . .$30.00
3” Floormaster #7-1800 Grit Lt. Blue . .$30.00
3” Floormaster #8-3500 Grit Lt. Grey . .$30.00
3” Floormaster Set of 8, 30-3500 Grit .$205.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
72
FLOOR
EASTERN MARBLE & GRANITE SUPPLY, INC.
R ES TO R AT I O N
Electroplated Honing Diamond Discs
Nylon Pads
• Very cost effective • Fast stock removal • Very flexible • For soft
stone and composites
3M Nylon Pads are available for stripping and polishing. Black pads
are used for heavy duty stripping. Red pads are used for medium
stripping. White pads are used for polishing.
ITEM
PRICE
14” White . . . . . . . . . . . . . . . . . . . . . . . . .$7.20
14” Black . . . . . . . . . . . . . . . . . . . . . . . . .$7.20
14” Red . . . . . . . . . . . . . . . . . . . . . . . . . .$7.20
18” White . . . . . . . . . . . . . . . . . . . . . . . . .$7.80
18” Black . . . . . . . . . . . . . . . . . . . . . . . . .$7.80
18” Red . . . . . . . . . . . . . . . . . . . . . . . . . .$7.80
ITEM
GRIT
3”
4”
5”
EP-50_
EP-70_
EP-120_
EP-220_
EP-400_
EP-600_
50
70
120
220
400
600
$20.20
$13.50
$11.16
$10.44
$9.90
$9.90
$35.64
$24.12
$19.80
$17.10
$15.30
$15.30
$58.34
$38.70
$31.68
$26.10
$22.50
$22.50
Chimpanzee Polishing Pads
50% Fiber. 50% Nylon.
ITEM
6” CHIMPANZEE . . . . . . . . . . . . . . . . .$1.90
7” CHIMPANZEE . . . . . . . . . . . . . . . . .$2.00
10” CHIMPANZEE . . . . . . . . . . . . . . . .$3.65
14” CHIMPANZEE . . . . . . . . . . . . . . . .$4.50
18” CHIMPANZEE . . . . . . . . . . . . . . . .$6.50
Abrasive Technology Genesis
Diamond Discs
Velcro backed diamond discs are available in 3”, 4”, 5” and 7” diameter. The following grits are available: nickel bond: 70, 120, 220, 400
and 600. Resin bond: 600, 800, 1800 and 3500.
PRICE
Easy Mask Drop Cloth
Easy mask drop cloth is a thin plastic masking material pre-taped on
one edge and it is used to protect walls and baseboards while grinding and polishing. Available in rolls 24” x 75’. Dispenser sold
separately.
ITEM
DDV_60
DDV_120
DDV_220
DDV_400
DDV_600N
DDV_600
DDV_800
DDV_1800
DDV_3500
DESCRIPTION
ITEM
DESCRIPTION
664460-R
24” x 75’ per roll . . . . .$9.50
Case of 12 . . . . . . . .$73.80
Dispenser . . . . . . . . . .$6.00
3” PRICE 4” PRICE 5” PRICE 7” PRICE
70 grit-metal (green)
120 grit-metal (black)
220 grit-metal (red)
400 grit-metal (tan)
600 grit-metal
600 grit-resin (orange)
800 grit-resin (lt. tan)
1800 grit-resin (blue)
3500 grit-resin (dk. tan)
$19.20
$16.40
$13.80
$12.50
$12.50
$11.20
$11.20
$11.20
$11.20
$34.00
$29.00
$24.00
$21.90
$21.90
$19.50
$19.50
$19.50
$19.50
$53.00
$45.00
$38.00
$34.00
$34.00
$31.00
$31.00
$31.00
$31.00
$95.00
$82.00
$68.00
$55.00
$55.00
$49.00
$49.00
$49.00
$49.00
589760-C
PRICE
Generic Diamond Discs Turbo Style
Generic Velcro Backed Diamond Polishing Discs 3”,
4”, 5” and 7” Diamond Discs.
PRICE PER PRICE PER PRICE PER PRICE PER
3” DISC
4” DISC
5” DISC
7” DISC
ITEM
GN1_50
GN1_120
GN1_220
GN1_400
GN1_600
GN1_800
GN1_1800
GN1_3500
GN1_8500
50 grit-resin (green)
120 grit-resin (black)
220 grit-resin (red)
400 grit-resin (yellow)
600 grit-resin (brown)
800 grit-resin (white)
1800 grit-resin (blue)
3500 grit-resin (gray)
8500 grit-resin (purple)
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$15.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$19.00
$25.90
$25.90
$25.90
$25.90
$25.90
$25.90
$25.90
$25.90
$25.90
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
73
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
$46.00
FLOOR
EASTERN MARBLE & GRANITE SUPPLY, INC.
E.M. “Granite” Polishing Heads
ITEM
CMFP
RESTORATION
Alpha Gloss Meter
DESCRIPTION
PRICE
4’ final polishing heads for . . . . .$28.00
granite with snail lock adapter
• Accurate measurement of gloss level.
• Must have for every fabricator.
• Minimizes consumer complaints.
ITEM
PRICE
GM . . . . . . . . . .$775.00
GM1 . . . . . . . . .$475.00
Brushes for Texture Surfaces
Grit Rotary Brushes
Mal-Grit™ brushes offer solutions to a wide range of cleaning situations. Silicone carbide impregnated in nylon bristles is self-replenishing as brush wears, offering unmatched value that outlasts floor
pads over 100 to one! That translates directly into time and cost
savings. Featuring our water and chemical resistant Tuff-Block ® to
insure that the block lasts as long as the bristles for maximum life
expectancy. All grit brushes with the exception of Mal-Grit Lite™
must be in run in a wet environment. Trim-Length 1-1/2”.
A. Mal-Grit Xtra™–The most aggressive grit available. This heavy gauge
nylon with larger grit is used for stripping heavily soiled floors, such
as concrete floors in an industrial setting.
B. Mal-Grit™–Our most popular grit brush. An aggressive brush for
general scrubbing or stripping finishes from hard surfaces.
Effectively cleans wide grout lines.
C. Clean-Grit™–An excellent general scrubbing brush for frequent
maintenance cleaning. Flexible enough for cleaning narrow grout
lines and uneven surfaces.
D. Mal-Grit Lite™–Offers the durability of grit brushes with minimum
aggression. For daily scrubbing of hard surface flooring and polishing applications.
Final Polishing Compounds and Colors
5 Extra Powder
• Orange powder consists of aluminum oxide, two natural resins and
Potassium/5-Extra oxalate.
• Exceptional polishing powder for marbles.
• Specially formulated to prevent burning and to leave a stable, long
lasting polish.
ITEM
DESCRIPTION
EP
9 lb. minimum . . . . . . . .$8.75 lb.
Granitina Powder
Italian Craftsman® Granitina Buffing Powder is a blended buffing
powder which is used to bring granite to a high polish.
ITEM
DESCRIPTION
GP
ITEM
DESCRIPTION
MP18-8
MP18-11
MP18-9
MP18-10
MP18-12
Tampico for polishing
Polyproylene for cleaning
Clean-Grit
Mal-Grit Xtra
Mal-Grit
BRISTLE COLOR
PRICE
Yellow
White
Blue
Orange
Black
$97.00
$190.00
$280.00
$280.00
$280.00
PRICE
PRICE
8 lb. pail min.. . . . . . . . $8.00/lb.
Tin Oxide
The Tin Oxide we stock is made for the stone market. It is not a blend
of oxides called Tin Oxide. It is Tin Oxide.
ITEM
TIN
DESCRIPTION
PRICE
Tin Oxide . . . . . . . . . . .$15.00/lb.
Colored Oxides
For dark colored granite and marble.
ITEM
DESCRIPTION
PRICE
RED OXIDE
1.1 lb. box . . . . . . . . . . .$16.00
GREEN OXIDE 1.1 lb. box . . . . . . . . . . .$16.00
BROWN OXIDE1.1 lb. box . . . . . . . . . . .$16.00
BLACKOXIDE 1.1 lb. box . . . . . . . . . . . .$8.50
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
74
FLOOR
EASTERN MARBLE & GRANITE SUPPLY, INC.
RESTORATION
Squeegee
Italian Craftsman Polishing Cream
Introducing our new revolutionary natural polishing cream! Marble
polishing made simple! Traffic areas can be easily polished!
Maintenance by natural polishing can now be easily handled by
natural polishing can now be easily handled by your janitorial staff!
Handle not included.
ITEM
DESCRIPTION
SQUEEGIE
PRICE
16” . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.00
It is now practical to use polished marble on
floors in high traffic areas!
ITEM
ICPC
DESCRIPTION
PRICE
Quart . . . . . . . . . . . . . . . . . . . . . . . . . .$18.00
Travertine Fill
Travertine Fill is a wall and floor grout that comes in light travertine
and dark travertine color. This product is used to fill the grout lines
as well as fill the holes. Travertine Fill is a two part system consisting of a beige powder and additive.
ITEM
DESCRIPTION
TF LIGHT
TF DARK
TFA
1 gallon-Light . . . . . . . . . . .$41.50
1 gallon-Dark . . . . . . . . . . . .$41.50
Additive for Travertine Fill
1 gallon . . . . . . . . . . . . . . . .$12.50
Available in 25 lb. bucket of powder and one
gallon can of additive. Special orders available.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
75
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC.
MASONRY
Steel Tipped Hand Chisels
ITEM
DESCRIPTION
SC7
SC11
SC15
SC16
7mm . . . . . . . . . . . . . . . .$11.00
11mm . . . . . . . . . . . . . . .$12.00
15mm . . . . . . . . . . . . . . .$14.00
16mm . . . . . . . . . . . . . . .$16.00
PRICE
Toothing Hand Chisels
TC10
TC12
TC15
SCULPTURING
Pneumatic Mortar Removal Set
Chisels and Pitching Tools
ITEM
&
DESCRIPTION
The Pneumatic Mortar Removal Set is powerful enough to cut through
the hardest mortars yet can be throttled down for fine detail work.
The set features:
• 1” “Type B” short stroke carving tool.
• 10’ air hose assembly with STAUBLI push-button Quick Connect.
• Striking cap and joint clean-out nozzle.
• Tool pouch for easy storage.
• Mortar removal chisels (4)–1/8” and _” carbide cape chisels, 4-tooth
carbide ripper, _” steel swept chisel.
Use with a 5HP compressor to shave countless hours from your task.
PRICE
10mm . . . . . . . . . . . . . .$18.00
12mm . . . . . . . . . . . . . .$20.00
15mm . . . . . . . . . . . . . .$22.00
Pitching Tools
ITEM
PT-30
PT-35
PT-40
PT-50
SPT-30
SPT-40
SPT-50
DESCRIPTION
PRICE
30mm Carbide Tipped . .$43.00
35mm Carbide Tipped . .$54.00
40mm Carbide Tipped . .$58.00
50mm Carbide Tipped . .$70.00
30mm Steel Tipped . . . .$19.00
40mm Steel Tipped . . . .$22.00
50mm Steel Tipped . . . .$27.00
Sculptor’s Hammer
ITEM
HAMMER1
DESCRIPTION
ITEM
DESCRIPTION
PRICE
PMRS
Pneumatic Mortar Removal Set . . . . . .$449.00
Hand Tracer
ITEM
STOCK
WIDTH
OF BLADE
PRICE
CHT1112
CHT12
CHT1182
CHT118212
CHT1183
CHT1184
1”
1”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/2”
2”
2”
2-1/2”
3”
4”
$67.00
$73.00
$76.00
$83.00
$94.00
$115.00
ITEM
STOCK
WIDTH
OF BLADE
PRICE
1-1/4”
1-1/2”
1-3/4”
2”
2-1/2”
3”
4”
$59.00
$62.00
$66.00
$75.00
$81.00
$95.00
$116.00
Hand Chipper
PRICE
1lb., 9oz. . . . . . . . . . . . .$12.50
CHCH34114
CHCH1112
CHCH1134
CHCH12
CHCH118212
CHCH1183
CHCH1184
3/4”
1”
1”
1”
1-1/8”
1-1/8”
1-1/8”
Stone Mason’s or Mash Hammer
ITEM
HMH3
HMH3CT
HMH4
HMH4CT
HMH6
HMH8
HMH10
HMH12
HMH14
HMH16
HMH18
WEIGHT
PRICE
3 lbs.
3 lbs. Carbide Tip
4 lbs.
4 lbs. Carbide Tip
6 lbs.
8 lbs.
10 lbs.
12 lbs.
14 lbs.
16 lbs.
18 lbs.
$66.50
$106.50
$68.50
$108.50
$86.00
495.00
$117.50
$147.50
$161.50
$188.50
$205.00
Add $7.00 additional charge for handle insertion.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
76
EASTERN MARBLE & GRANITE SUPPLY, INC.
MASONRY
Good maintenance of your carbide chisels lets you cut faster and
more accurately. However, improper grinding can damage the carbide and cause tool failure.
To extend the life of your carbide tipped chisel, these suggestions
may help you protect your tools and preserves their use at peak
performance.
• When grinding leave corners slightly beveled. very sharp or pointed
carbide may break on harder stones.
• Don’t forget to grind the shank end or striking head
frequently to maintain the correct “as new” shape for safe
performance.
• Use care when storing or transporting carbide tools. Although tough
and durable, carbide can break especially when struck by another
carbide tool.
• Never quench your carbide tool after griding. Sudden changes in
temperatures can cause cracking or chipping of the tip, always air
cool the tool after grinding.
ITEM
PRICE
1-1/8”
1-1/2”
2”
2”
2-1/4”
2-1/2”
3”
4”
$54.00
$68.00
$81.00
$88.00
$92.00
$95.00
$99.00
$122.00
WIDTH
OF BLADE
PRICE
1-1/2”
2”
2”
$69.00
$90.00
$90.00
1”
1”
1”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
ITEM
STOCK
CH078112
CH01182
CH012
7/8”
1-1/8”
1”
Carbide Tipped Hand Chisels
STOCK
PRICE
3/8” . . . . . . . . . .$29.00
1/2” . . . . . . . . . .$36.00
5/8” . . . . . . . . . .$41.00
3/4” . . . . . . . . . .$45.00
7/8” . . . . . . . . . .$49.00
1” . . . . . . . . . . .$52.00
Hand Chisels
CHC38
CHC12
CHC58
CHC34
CHC78
CHC1
WIDTH
OF BLADE
Offset Hand Set
Hand Point
ITEM
STOCK
CHS1118
CHS1112
CHS12
CHS1182
CHS118214
CHS118212
CHS1183
CHS1184
Carbide-Tipped Hand Tools
ITEM
SCULPTURING
Hand Set
How to Care for Carbide Tools
CHP38
CHP12
CHP58
CHP34
CHP78
CHP1
&
STOCK
PRICE
3/8” . . . . . . . . . .$28.00
1/2” . . . . . . . . . .$35.00
5/8” . . . . . . . . . .$37.00
3/4” . . . . . . . . . .$41.00
7/8” . . . . . . . . . .$46.00
1” . . . . . . . . . . .$49.00
ITEM
HAND CHISELS
C3
C4
C5
C6
C7
C8
C10
C12
C15
C18
C20
3mm
4mm
5mm
6mm
7mm
8mm
10mm
12mm
15mm
18mm
20mm
PRICE
. . . . . . . . .$13.00
. . . . . . . . .$14.00
. . . . . . . . .$15.00
. . . . . . . . .$16.00
. . . . . . . . .$17.00
. . . . . . . . .$18.00
. . . . . . . . .$19.00
. . . . . . . . .$21.00
. . . . . . . . .$22.50
. . . . . . . . .$27.00
. . . . . . . . .$37.00
Steel Point Chisel
ITEM
STEEL POINT CHISELS
SPC4
SPC5
SPC6
SPC8
SPC10
4mm
5mm
6mm
8mm
10mm
PRICE
. . . . . . . . .$17.00
. . . . . . . . .$18.00
. . . . . . . . .$20.00
. . . . . . . . .$23.00
. . . . . . . . .$27.00
Rasps
ITEM
STEEL POINT CHISELS
R15
R20
R25
R30
15cm
20cm
25cm
30cm
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
77
PRICE
. . . . . . . . .$17.00
. . . . . . . . .$18.50
. . . . . . . . .$23.00
. . . . . . . . .$25.00
EASTERN MARBLE & GRANITE SUPPLY, INC.
MASONRY
&
SCULPTURING
WheelMan
Towable MultiMixers
5 cu ft. Wheelbarrow MultiMixer.
The WheelMan portable mixer. No matter how tough it is to reach the
jobsite, the WheelMan will be there with 275 lbs. of perfectly mixed
mortar, stucco, grout, floor mud and of course concrete.
• Industrial grade 1/2 hp motor
• Safety-perfect balance point is perfect to lift and roll with minimum
effort.
• Easy to dump with optional workstand.
• Can be disassembled in just 1 minute to load components by one
person.
Workman 9 & 12 cu. ft. Towable Mixers.
The Workman MultiMixer is a showcase machine providing the
contractor with a fully featured, well engineered high performance
mixer.
• Honda motor.
• Torison bar suspension.
• Full width fenders.
• Crown ring protection.
• Foot activated dump release.
• Adjustable support legs.
• Ball hitch adapter and reflectors.
Mix 275 lbs. of concrete in less than 5 minutes.
SPECIFICATIONS
SPECIFICATIONS
Drum Capacity
Batch Output
Motor
Drum Diameter
Discharge outlet height
Wheel Size
Weight
ITEM
OPERATING
DIMENSIONS
DESCRIPTION
1105420 Portable 5CF wheelbarrow style
1105430 Portable 5CF wheelbarrow style, gas
Gasoline Motor (Honda)
Universal Bucket Mixer.
The Mini-Mix 60 is a truly versatile mixing machine. Quickly and
thoroughly mix mortar, stucco, thin set, dry pack mortar, epoxy,
plaster and more.
• Fully enclosed 1/2 hp motor, with thermal switch prevents overheating protection.
• Quiet operation with powerful direct drive and gearbox.
• Plastic batch bucket made of wear resistant PVC.
• Handle lifts bucket and easily rolls along.
SPECIFICATIONS
Bucket Capacity
Batch Output
Drum Diameter
Paddle Speed
Wheel Size
Machine Weight (boxed)
Motor
Power
14 gal.
12 gal./60 lb. bag
24”
55 rpm
4”
64 (70) lbs.
1/2 hp
110v, 6 amp.
OPERATING
DIMENSIONS
DESCRIPTION
1193989 12 gallon/50 lb. 1/2 hp 110v Bucket Mixer
9 cu ft. 12 cu. ft.
6 cu. ft. 9.5 cu. ft.
27.5”
32,5”
27.5”
26.5”
20”
20”
525 lbs. 650 lbs.
1.5 hp 1.5 hp
110/220v 110/220v
5.5 hp 5.5 hp
•output based on usable volume.
PRICE
47”L x 37”H x 26”W . .$499.00
47”L x 37”H x 26”W . .$769.00
MiniMix 60
ITEM
Drum Capacity
Batch Output
Drum Diameter
Discharge outlet height
Pneumatic Wheels
Weight
Electric Motor
5 cu ft.
275 lbs.
1/2 hp 110v/6 amp
24”
8”
14” pneumatic tires
115 lbs.
MultiMixer Concept–A false button works with four piece paddles to provide a very
aggressive mixing action.
Use one machine to make mortar, stucco and concrete with complete confidence.
OPERATING
DIMENSIONS
ITEM
DESCRIPTION
1119606G
1119606E
1119608G
1119608E
9CF Towable w/5.5 hp Honda
9CF Towable w/1.5 hp Electric
12CF Towable w/5.5 hp Honda
12CF Towable w/1.5 hp Electric
PRICE
72”L x 55”H x 35.5”W . . . .$2,199.00
72”L x 55”H x 35.5”W . . . .$2,199.00
76.5”L x 56”H x 37.5”W . . .$2,499.00
76.5”L x 56”H x 37.5”W . . .$2,499.00
MinuteMan
5 Cu. Ft. Portable MultiMixer.
The MinuteMan continues to reign as the “World’s Finest Portable
Concrete Mixer.” MinuteMan is a unique blend of power, speed and
reliability.
• Industrial grade 1/2 hp motor.
• Easy to dump
• Direct drive gearbox
• Portability–can be disassembled into 3 easy to load components by
one person.
SPECIFICATIONS
Drum Capacity
Batch Output
Motor
Drum Diameter
Discharge outlet height
Wheel Size
Weight
Storage dimensions
PRICE
24”L x 18”H x 23”W . .$499.00
5 cu ft.
275 lbs..
1/2 hp 110v/6 amp
24”
21”
10”
120 lbs.
26” x 26” x 26”
*Output based on usable volume.
ITEM
DESCRIPTION
OPERATING
DIMENSIONS
126605
Portable SCF with tripod stand
52”Lx 57”H x 28”W . . . . . .$599.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
78
PRICE
EASTERN MARBLE & GRANITE SUPPLY, INC.
MASONRY
&
SCULPTURING
Split-Tailer
Short Cut 14” Masonry Saw
• Make split tails on the jobsite.
• Handles stainless steel up to 2” wide (1” splits) and 3/16” thick.
• Manually operated, no electricity or compressed air required.
This is a marathon saw, it is guaranteed to cut virtually anything . . .
all day long. A star performer needing only a 15 amp/110 volt
circuit, the Short Cut will cut bricks, blocks, paving stones or tile
smoothly and easily. And boasts the biggest cutting tray available on
a 14” saw.
ITEM
PRICE
SPLIT TAILER . . .$750.00
Strapmaster ®
• Make quick, easy and ready-to-use brackets on the jobsite.
• Create custom brackets, anchors and hangers on the jobsite.
• Portable one-man tool shop.
The various shapes and twists shown here have been created with
StrapMaster in minutes. . . Imagine carrying the Strapmaster and a
few lengths of stock and make any bracket, strap or hanger to the
exact size on the job.
Discover the ease of use, speed, cost savings and convenience,
whether you’re hanging a security camera, a sprinkler system or
installing a garage door. . . anyone hanging or fastening parts with
difficult shapes will love STRAPMASTER. Indispensible for plumbers
and HAC contractors. . . mechanics and small shops love it!
Easy to order too. Simply call our toll-free number 1-800-643-8818
and charge it to your credit card and start enjoying the benefits.
SPECIFICATIONS
MODEL A
Capacity
Standard Punch
Cuts steel strap up to:
Punches holes in steel strap
Bends steel strap
Twists steel strap
Cuts round steel rod up to:
Bends round steel rod up to:
5 Ton
9/32” diameter
3/26” thick
1/2: diam. thru 1/8” thick
9/32” diam. thru 1/4” thick
1” wide by 1/8” thick
1” wide by 1/8” thick
3/8” diameter
1/4 diameter
MODEL B
7.5 Ton
13/32” diameter
1/4” thick
9/16” diam. thru 1/8” thick
3/8” diam. thru 1/4” thick
1-1/2” wide by 3/16” thick
1-1/2” wide by 3/16” thick
3/8” diameter
3/8” diameter
SPECIFICATIONS
Blade guard capacity
14”
Motor 110v/60hz
1.5 hp, 15 amp
Motor speed
3200 rpm
Blade speed
2,150 rpm
Max. cutting length
18”
Max. cutting depth 90º/45º
4-3/4”/2-1/3”
Cutting tray dimensions
20” x 17”
Water pump flow
270 (300) lbs.
Water pan capacity
7.5 gals.
Noise level
78 db(A)
Length 43.5” x Width 34” x Height 48”
• The powerful 1.5 hp, 15 amp, motor is a reliable jobsite partner, The motor
has been specially designed to run on standard household current, without
tripping breaker. For large scale production cutting, a 220v, 3 hp model is
available.
• Toughness–The water pan is made with ABS plastic, you cannot break it.
Emptying the pan is easy, just slide it out like a dresser drawer.
• Performance Power is transmitted from the motor to the blade via a ribbed
serpentine belt. The belt drive is fully enclosed and self-tensioning. No
maintenance means worry free performance.
* Shipping and handling costs will be added determined by your location.
Other hole punch and die sizes are available: 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 13.32”, 7/16”, 1/2”.
Call for pricing and availability.
ITEM
DESCRIPTION
STRAP MASTER A Model A
STRAP MASTER
Model B
PRICE
• Plunge cuts are smooth and precise as the cutting head pivots on sealed roller bearings.
• Versatility. The cutting tray roller system is the
best in the industry. Load up 4 bricks and cut
them in one pass! It’s that smooth and strong.
And best of all, you can’t cut through the tray.
• Performance. When cutting miters, simply rotate
the cutting head to 45º. No more having to position the brick or block at 45º, the short cut 14”
does it for you!
$565.00
$815.00
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
79
EASTERN MARBLE & GRANITE SUPPLY, INC.
MASONRY
Combi 1000
&
SCULPTURING
• VERSATILITY–To make a mitter cut just tilt the cutting head over to 45º. The
cuts are absolutely perfect, make seamless back splash in just minutes.
Combi 1000 14” Tile, Stone and Masonry Saw.
The COMBI 1000 has quickly become the favorite saw of stone
masons, precast fabricators and general contractors across America.
VERSATILITY best describes the Combi 1000. . . cut 24” x 24”
pavers on a diagonal, marble and granite stones to 1/32” accuracy,
precast pieces up to 4-3/4” thickness–do it all quickly and accurately
with just one saw–the Combi 1000!
• ACCURACY–Plunge cuts up to 4-3/4” in depth are quick and accurate!
• PORTABILITY–The support legs slide up and away for transport and storage.
Hand grips are located on each corner to ease handling.
SPECIFICATIONS
Blade diameter
Blade shaft diameter
Motor speed/blade speed
Max. cutting length
Cutting table dimensions
Max. cutting depth 90º/45º
Weight (crated)
Water pan capacity
Noise level
14”
1”
3 hp 220v 15 amp
40”
48” x 20”
4-3/4”/2-1/3”
270 (300) lbs.
7.5 gals.
78 db(A)
Price $3,699.00. Built-in stand and wheel kit included.
• Power–The 3 hp motor mated to the Poly-V belt delivers plenty of power to
the 14” blade–cut all day long with no loss of power. GUARANTEED!
• An optional wheel kit attaches to the rear legs, one person can take the
Combi 1000 on site, set it up and it’s ready-to-go!
• Toughness–The water pan is made with ABS plastic. It won’t crack.
GUARANTEED!
• PERFORMANCE–With 40” of cutting length and accurate to 1/32”, the Combi
1000 delivers the performance required by the most demanding installation
applications cations. GUARANTEED!
• QUALITY–The stainless steel cutting surface and jig welded frame are tough,
24” x 24” pavers, 4” thick precast pavers, cutting marble and granite with
virtually no grout lines. . . with ease.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.easternmarble.com
EASTERN MARBLE & GRANITE SUPPLY, INC. •
1-800-643-8818
80
INDEX
ABRASIVES: Pages 16-24
ABRASIVES: Pages 16-24 (Continued)
5" Edge Wheels with Snail Lock for
Straight Edging Machines . . . . . . . . . . . . . . . . . . . . . . . . .22
New Technology Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3M Profile Shaped Diamond Hand Pads . . . . . . . . . . . . . .18
3M Silicon Carbide & Aluminum Oxide Screens . . . . . . . . .20
3M Silicon Carbide Belts . . . . . . . . . . . . . . . . . . . . . . . . . .19
Abrasive Technology Diamond Belts . . . . . . . . . . . . . . . . .18
Abrasive Technology Diamond Rectangular Hand Pads
Pneumatic Drum and Sanding Belts-Silicon Carbide . . . . .19
Sait Silicone Carbide Discs . . . . . . . . . . . . . . . . . . . . . . . .19
Silicon Carbide Grinding Wheels . . . . . . . . . . . . . . . . . . . .20
Slabmaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Zec Silicone Carbide Discs . . . . . . . . . . . . . . . . . . . . . . . .19
. .18
Abrasive Technology Genesis Diamond Discs . . . . . . . . . .18
Alpha 4" Snail-Lock Resin . . . . . . . . . . . . . . . . . . . . . . . . .22
Alpha Ceramica Buff . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Alpha Ceramica Ex-Pads . . . . . . . . . . . . . . . . . . . . . . . . . .17
Alpha Ceramica Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Alpha Ceramica Resin . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Alpha Ceramica Vitrified . . . . . . . . . . . . . . . . . . . . . . . . . .16
Alpha PVA Polisher-Makita Style . . . . . . . . . . . . . . . . . . . .21
Alpha PVA Polisher-Quick Change . . . . . . . . . . . . . . . . . . .21
Alpha Sandpaper for Marble Polishing . . . . . . . . . . . . . . . .20
Alpha Summit Radial Arm Polisher Diamond Discs . . . . . .22
Alpha Twincur Edge Polishing System . . . . . . . . . . . . . . . .22
Backing Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Biggi Stones 4" and 5" with Snail . . . . . . . . . . . . . . . . . . . .21
CLEANERS: Pages 5-6
Enhance Gloss Solid Surface Cleaner/Polish . . . . . . . . . . . .6
Enhance Matte Solid Surface Cleaner . . . . . . . . . . . . . . . . .6
Heavy Duty Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Italian Craftsman Ceramic Tile Cleaner . . . . . . . . . . . . . . . .6
Italian Craftsman Grout Haze Remover . . . . . . . . . . . . . . . .6
Italian Craftsman Polish . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Italian Craftsman Stone Cleaner . . . . . . . . . . . . . . . . . . . . .5
Italian Craftsman Stone Maintainer . . . . . . . . . . . . . . . . . . .5
Italian Craftsman Renew . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Klenz All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Liquid Marble Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Revitalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Copper Wonders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Diamond Products for Fabrication . . . . . . . . . . . . . . . . . . .19
COMPOUNDS & POLISHING POWDERS: Pages 10-11
Dong Sing Professional Radial Arm Polishing System
#52 Special Polishing Powder . . . . . . . . . . . . . . . . . . . . . .10
10" Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
#52-B Polishing Powder . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Dressing Stones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
5-Extra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Drum Stone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Granimar Polishing Compound . . . . . . . . . . . . . . . . . . . . . .11
Electroplated Honing Diamond Discs . . . . . . . . . . . . . . . . .19
Granitina . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Frankfurt Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Italian Craftsman Honing Powder . . . . . . . . . . . . . . . . . . . .11
Frankfurt Stones for Granite . . . . . . . . . . . . . . . . . . . . . . . .24
Italian Craftsman Polishing Cream . . . . . . . . . . . . . . . . . . .10
Frankfurt Stones for Marble . . . . . . . . . . . . . . . . . . . . . . . .24
Oxalic Acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Generic Diamond Discs . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Tin Oxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Hermes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Indiam-Diamond Frankfurt . . . . . . . . . . . . . . . . . . . . . . . . .24
CORE BITS/HOLE SAWS: Pages 36-38
Italian Craftsman Diamond Frankfurt Cobalt Bond . . . . . . .24
Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Italian Craftsman Viper Discs . . . . . . . . . . . . . . . . . . . . . . .16
Alpha Core Drill Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Magnesite Stones for Radial Arm Polisher . . . . . . . . . . . . .23
Brazed CNC Router Bits . . . . . . . . . . . . . . . . . . . . . . . . . .36
Metal Lock Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Brazed Diamond Router Cutting Bits . . . . . . . . . . . . . . . . .38
INDEX
CORE BITS/HOLE SAWS: Pages 36-38 (Continued)
DIAMOND BLADES: Pages 25-29 (Continued)
Brazed Easy Drill Core Bits . . . . . . . . . . . . . . . . . . . . . . . .37
SM Super Premium Porcelain Blades . . . . . . . . . . . . . . . .28
Easy Drill Core Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Super Dry Green SD Series
Indiam Diamond Blunt Nose Drill Bits . . . . . . . . . . . . . . . . .36
Tile and Porcelain Blades . . . . . . . . . . . . . . . . . . . . . . . . .28
Indiam Diamond Straight Cutting Bits . . . . . . . . . . . . . . . . .36
Indiam Segmented Core Bits . . . . . . . . . . . . . . . . . . . . . . .36
EQUIPMENT: Pages 60-63
Indiam Segmented Diamond Core Bits . . . . . . . . . . . . . . .36
Air-3 Dust Collectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Infinity Segmented Core Bits . . . . . . . . . . . . . . . . . . . . . . .37
Coch PRM-50 Bowl Hole Drilling, Milling and
Polishing Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
DIAMOND BLADES: Pages 25-29
Coch PRM-50 Sink Hole Drilling, Milling and
Polishing Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Alpha Contour Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Fundisa SP450 Economical Bridge Saw . . . . . . . . . . . . . .61
Alpha Eclipse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Ital-Mecc Air3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Alpha Libero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Ital-Mecc Air-3 With Crosswise Bench . . . . . . . . . . . . . . . .63
Alpha Numero Uno . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Ital-Mecc Air-3 Self Cleaning System . . . . . . . . . . . . . . . . .62
Alpha Quad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Ital-Mecc Air Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Alpha Silencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Ital-Mecc Baby Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Alpha Sonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Ital-Mecc Sludge Dehydrator . . . . . . . . . . . . . . . . . . . . . . .63
Alpha Tuck Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Laser Blazer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Alpha Typhoon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Manta 200/250/300 Economica . . . . . . . . . . . . . . . . . . . . .62
Brazed Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Mantello B-5-SSGT Bridge Saw . . . . . . . . . . . . . . . . . . . . .60
Brazed Diamond Concave Discs for Marble and Granite . .29
Mantello B-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Brazed Fine Cut Blades for Marble and Granite . . . . . . . . .29
Mantello B-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Generic Diamond Blades . . . . . . . . . . . . . . . . . . . . . . . . . .28
Mantello Inline Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Indiam Continuous Rim Ceramic and Marble Blade . . . . . .26
Mantello Sludge Collector . . . . . . . . . . . . . . . . . . . . . . . . .61
Indiam Contour Granite Blade . . . . . . . . . . . . . . . . . . . . . .26
Mantello Tile & Slab Line Machine . . . . . . . . . . . . . . . . . . .60
Indiam Contour Marble Blade . . . . . . . . . . . . . . . . . . . . . .26
Indiam Granite Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Indiam Marble Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
GLUES, ADHESIVES & PATCHING
MATERIALS: Pages 12-14
Indiam Worm Drive Blades . . . . . . . . . . . . . . . . . . . . . . . .26
Italian Craftsman Acrylic Glues . . . . . . . . . . . . . . . . . . . . .12
Infinity III SC International 15mm Seg. . . . . . . . . . . . . . . . .25
Italian Craftsman Epoxy Glues . . . . . . . . . . . . . . . . . . . . . .12
Infinity International Silence Core 10mm Seg. . . . . . . . . . .25
Italian Craftsman Polyester Adhesive . . . . . . . . . . . . . . . . .12
Infinity Silence Core Technology Marble Blades . . . . . . . . .26
Marking Pencils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Italdiamant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Razor Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Lampo 18mm Height Segment Silence Core Granite . . . . .25
Tenax Polyester Glue . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Pearl Abrasive Dry Cutting Electroplated Diamond Blades .29
Tenax Sealers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Pearl Abrasives GRT Blades . . . . . . . . . . . . . . . . . . . . . . .28
Tenax Waxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Professional Series Silent Core 9.5m Seg. Granite . . . . . . .25
Tile Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Rodding Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Travertine Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Wax Marking Crayons . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
INDEX
FLOOR RESTORATION: Pages 67-75
FLOOR RESTORATION: Pages 67-75 (Continued)
Abrasive Technology Genesis Diamond Discs . . . . . . . . . .73
Travertine Fill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Abrasive Technology Polishing Pads Floormaster . . . . . . .72
Triple Thick Resin Bond Floor Polishing Discs-3" . . . . . . . .69
Alpha Gloss Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
TURBOCAT 3" for Marble and Terrazzo . . . . . . . . . . . . . . .68
Baby Roc Diamond Discs . . . . . . . . . . . . . . . . . . . . . . . . .72
Brushes for Texture Surfaces . . . . . . . . . . . . . . . . . . . . . . .74
HAND TOOLS: Pages 39-47
Chimpanzee Polishing Pads . . . . . . . . . . . . . . . . . . . . . . .73
Alpha Air 658 - Grinder/Polisher - Air . . . . . . . . . . . . . . . . .43
Clarke Diamond Pad Driver . . . . . . . . . . . . . . . . . . . . . . . .68
Alpha - AWP158 Grinder/Polisher - Electric . . . . . . . . . . . .39
Clarke Encore Scrubber and Polisher . . . . . . . . . . . . . . . .67
Blade Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Clarke MP-18 Marble Polisher . . . . . . . . . . . . . . . . . . . . . .67
Blade Water Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Clarke Wet and Dry Tank Vacuums . . . . . . . . . . . . . . . . . .67
Bosch Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Delipping Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
DeWalt #402 - Right Angle Grinder - Electric . . . . . . . . . . .40
Easy Mask Drop Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Flaming Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Electroplated Honing Diamond Discs . . . . . . . . . . . . . . . . .73
Flex 1302 Center Water Feed Grinder . . . . . . . . . . . . . . . .41
E.M. "Granite" Polishing Heads . . . . . . . . . . . . . . . . . . . . .74
Flex-7428-7" Variable Speed Polisher . . . . . . . . . . . . . . . .41
Final Polishing Compounds and Colors . . . . . . . . . . . . . . .74
Flex BED 55 Drill Press . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Flex Dry Variable Speed Polisher . . . . . . . . . . . . . . . . . . . .72
Flex Dry LK603VV Variable Speed Polishers . . . . . . . . . . .42
Frankfurt Wire Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Flex Edge Milling Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Full Face Metal Bond Delipping Discs . . . . . . . . . . . . . . . .68
Flex F1509FR Tuck Point Machine . . . . . . . . . . . . . . . . . . .41
Generic Diamond Discs Turbo Style . . . . . . . . . . . . . . . . . .73
Flex L1106VE-Heavy-Duty Electric Variable
Speed Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Generic Resin Bond Floor Polishing Discs-3" Turbo Style .69
Granite Polisher GP-18 . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Italian Craftsman Copper Granite Floor Discs . . . . . . . . . .69
Italian Craftsman Marble Floor Discs . . . . . . . . . . . . . . . . .69
Italian Craftsman Polishing Cream . . . . . . . . . . . . . . . . . . .75
Italian Craftsman Resin Granite Floor Discs . . . . . . . . . . . .69
Flex L1109 Heavy Duty Angle Grinder . . . . . . . . . . . . . . . .42
Flex L1503VR Polisher . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Flex L1506VR Electric Grinder . . . . . . . . . . . . . . . . . . . . . .43
Flex LK 302VE Polisher . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Flex LST 1503 VR Variable Speed Tread Milling Tool . . . . .40
Flex LW1503 Grinder/Polisher - Electric . . . . . . . . . . . . . . .39
Milwaukee Variable Speed Dry Right Angle Grinder/
Polisher-Electric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Flex LW1509 Center Water Feed and Side Water Feed . . .43
Nu-Source Wet Dry Vac . . . . . . . . . . . . . . . . . . . . . . . . . . .68
FlexLW603 VR - Heavy Duty Wet Variable Speed
Nylon Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Grinder/Polisher
Pirahna Discs-Pirahna System for Marble
and Granite Floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Ghines SECTOR Aquaplaning Conversion Kit . . . . . . . . . .46
Resin Bond "Frankfurt" for Marble . . . . . . . . . . . . . . . . . . .69
Resin Bond Marble Floor Polishing Discs- 'Spiral'- 3" . . . .69
Softcut 3-1/2" Metal Discs for Granite,
Marble, Limestone And Terrazzo . . . . . . . . . . . . . . . . . . . .68
Squeegee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Suhner Polisher-Electric . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Tec Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Ghines SECTOR Shaping and Milling Machines . . . . . . . . .46
Global #218 Lightweight Polishing Tool . . . . . . . . . . . . . . .43
Global #215 High Speed Grinder - 5" . . . . . . . . . . . . . . . .40
Loc-Line Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Makita 5" Disc Sander . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Makita 9527PB Angle Grinder . . . . . . . . . . . . . . . . . . . . . .40
Makita 9564CV Angle Grinder . . . . . . . . . . . . . . . . . . . . . .40
Milwaukee #5223-Straight End Grinder/Electric . . . . . . . . .47
INDEX
HAND TOOLS: Pages 39-47 (Continued)
MARBLE & GRANITE POLISHING
MEDIUMS: Pages 14-15 (Continued)
Milwaukee 5540 Variable Speed Dry Right Angle
Grinder/Polisher - Electric . . . . . . . . . . . . . . . . . . . . . . . . .44
Italian Craftsman Pamir . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Milwaukee Worm Drive Saws . . . . . . . . . . . . . . . . . . . . . . .44
Lead and Felt Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Portable Drill Press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Solid Felt Mops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Porter Cable #7408 - 4 1/2" Angle Grinder . . . . . . . . . . . .40
Wrapped Felt Mops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Sector E-1V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Sector E-1V 220 Volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
MASONRY & SCULPTURING: Pages 76-80
Sink Undermount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Carbide-Tipped Hand Tools . . . . . . . . . . . . . . . . . . . . . . . .77
Skilsaw Worm Drive Saw . . . . . . . . . . . . . . . . . . . . . . . . . .44
Chisels and Pitching Tools . . . . . . . . . . . . . . . . . . . . . . . . .76
Suhner Rotostar III - Flexible Shaft Machine . . . . . . . . . . .43
Combi 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Suhner USF2R Straight Grinder . . . . . . . . . . . . . . . . . . . . .47
Hand Chipper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Suhner - UWD2N/UWD4N Grinder/Polisher - Electric . . . .39
Hand Tracer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Suhner - UXF4R Variable Speed
Grinder/Polisher - Electric . . . . . . . . . . . . . . . . . . . . . . . . .39
Mini-Mix 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Suhner - UXJ2 Heavy Duty Grinder/Polisher - Electric . . . .39
Minute-Man . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Pneumatic Mortar Removal Set . . . . . . . . . . . . . . . . . . . . .76
Sculptor's Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
HANDLING EQUIPMENT Pages 50-52
Abaco Heavy Duty Lifter Bar Clamps . . . . . . . . . . . . . . . . .51
Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Heavy Duty Boom Hook . . . . . . . . . . . . . . . . . . . . . . . . . .50
Short Cut 14" Masonry Saw . . . . . . . . . . . . . . . . . . . . . . .79
Split-Tailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Stone Mason's or Mash Hammer . . . . . . . . . . . . . . . . . . .76
Towable Multi-Mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Wheelman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
High Rise Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Nylon Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Pendant Control, Battery Hydraulic Slab Cart . . . . . . . . . .51
Seam Setter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Slab Dolly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Slab Holder Trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Slab Lifter - Scissor Type . . . . . . . . . . . . . . . . . . . . . . . . . .52
Slab Lifter - Turner Clasp . . . . . . . . . . . . . . . . . . . . . . . . . .52
SAFETY EQUIPMENT: Page 65
3M 1100 Expandable Foam Ear Plugs . . . . . . . . . . . . . . . .65
3M 1100 Expandable Foam Ear Plugs - Corded . . . . . . . .65
3M 8210 N95 Particulate Respirator . . . . . . . . . . . . . . . . .65
3M 8511 N95 Particulate Respirator . . . . . . . . . . . . . . . . .65
3M Perforated Safety Goggles, 1620 . . . . . . . . . . . . . . . . .65
3M Sting-Rays Protective Eyewear, 1710 . . . . . . . . . . . . . .65
Slab Lifters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Slab Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Suction Cup - Double . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Suction Cup - Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
SAWS: Pages 54-59
2000QT Accuglide Saws . . . . . . . . . . . . . . . . . . . . . . . . . .58
Accuglide Bevel 2500QT Model . . . . . . . . . . . . . . . . . . . . .58
Accuglide Bridge Accessory . . . . . . . . . . . . . . . . . . . . . . .59
MARBLE & GRANITE POLISHING MEDIUMS: Pages 14-15
5" and 10" Carborundum Wheels . . . . . . . . . . . . . . . . . . .14
Alpha Felt Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Edge Polishing Bars and Cotton Pads . . . . . . . . . . . . . . . .15
Accuglide Walk Behind Handle . . . . . . . . . . . . . . . . . . . . .58
Alpha Wet Cutting Circular Saw . . . . . . . . . . . . . . . . . . . . .58
Combi 200 8" Portable Tile Saw . . . . . . . . . . . . . . . . . . . .56
Combi 250 10" Tile and Stone Saw . . . . . . . . . . . . . . . . . .57
INDEX
SAWS: Pages 54-59
Gemini Revolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Gemini Tile Shaper Ring Saw . . . . . . . . . . . . . . . . . . . . . .59
Manta Aluminum Portable Tile Saws . . . . . . . . . . . . . . . . .55
Manta Block and Slab Saws . . . . . . . . . . . . . . . . . . . . . . .55
Mini Bridge Saw with Side Table . . . . . . . . . . . . . . . . . . . .54
MK-70 Hand Held Saw . . . . . . . . . . . . . . . . . . . . . . . . . . .58
MK101 Pro Cutting Saw . . . . . . . . . . . . . . . . . . . . . . . . . .55
MK 370 Tile Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
MK 1070 Tile Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
MK-1080 Paver Saw/Brick Saw . . . . . . . . . . . . . . . . . . . . .57
MK-2000 Brick Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
MK-5000 Block Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Mondial Mec Mini Bridge Saws . . . . . . . . . . . . . . . . . . . . .54
Porter Cable 1500 Wet Cutting Tile Saw . . . . . . . . . . . . . .56
Slab Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Trac Star 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
SHAPING BITS/PROFILE WHEELS: Pages 30-35
(Continued)
Architectural Brazed Bits . . . . . . . . . . . . . . . . . . . . . . . . . .35
Brazed Anchor Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Brazed Diamond Products for Fabrication/Restoration . . . .32
Brazed Diamond Routers for Angle Grinders . . . . . . . . . . .31
Brazed Router Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Consolidated Template Free Continuous
Diamond Router Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
DC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Diamond Products for Fabrication . . . . . . . . . . . . . . . . . . .32
Easy Edge Shaping Wheels 3 Step System . . . . . . . . . . . .31
Easy Edge/Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Easy Sanding Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Generic Cup Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Granite Honing Systems . . . . . . . . . . . . . . . . . . . . . . . . . .33
Indiam 6" Calibrator . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Indiam Segmented Diamond Router Bits . . . . . . . . . . . . . .32
Pearl Diamond Cup Wheel . . . . . . . . . . . . . . . . . . . . . . . . .34
SEALERS: Pages 8-9
Bulletproof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Profile Wheels Segmented Diamond Routers
for Angle Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Enhancer Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Impregnator Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
STAIN REMOVERS/SEALERS: Page 7
Italian Craftsman Topical Stone Sealer . . . . . . . . . . . . . . . . .9
Alpha Rust Stain Remover RSR-2000 . . . . . . . . . . . . . . . . .7
Limestone and Marble Protector . . . . . . . . . . . . . . . . . . . . .8
Extract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
SLX100 Water and Oil Repellant . . . . . . . . . . . . . . . . . . . . .8
Italian Craftsman Oil Repellant . . . . . . . . . . . . . . . . . . . . . . .7
Stone Tech Grout Release . . . . . . . . . . . . . . . . . . . . . . . . . .9
Italian Craftsman Poultice . . . . . . . . . . . . . . . . . . . . . . . . . .7
Stone Tech Grout Sealer . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Italian Craftsman Professional Stone Sealer . . . . . . . . . . . . .7
Stone Tech Heavy Duty Stone Sealer Water Base . . . . . . . .9
Italian Craftsman Water Based Sealer Enhancer . . . . . . . . .7
Stone Tech Stone Enhancer and Water Base Sealer . . . . . .9
Oil and Grease Stain Remover Kit . . . . . . . . . . . . . . . . . . . .7
Stone Tech Water Based Stone Sealer . . . . . . . . . . . . . . . .9
Ultra System Floor Products . . . . . . . . . . . . . . . . . . . . . . . .9
SHAPING BITS/PROFILE WHEELS: Pages 30-35
6" Brazed Profile Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Alpha DS Style Shaping Wheel . . . . . . . . . . . . . . . . . . . . .33
Alpha Profile Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Alpha Style Cup Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Alpha Twistouch Adapter Turbo . . . . . . . . . . . . . . . . . . . . .34
NOTES
NOTES
NOTES