Cementing SSR® Subsurface Release Cementing Plug System system allows cementing operations to be performed from a floating vessel or fixed platform that uses a subsea wellhead. The SSR cementing plug set can also be used in other subservice applications, such as liners. The SSR cementing plug set is installed in the top joint of the casing string and is made up to the bottom of an installation tool that is attached to the casing string. The installation tool and casing string are lowered on a drillpipe string, landed and sealed in the subsea wellhead on the ocean floor. When the tool and string have landed, the well can be circulated before cementing operations. The bottom SSR plug is released ahead of the cement by a weighted plastic ball dropped down the drillstring. The ball lands on a seat on the bottom plug, releasing the bottom SSR casing plug. When the bottom SSR plug lands on the float collar, a bypass mechanism allows the cement to pump around the ball. After all the cement has been mixed and pumped into the drillpipe, a drillpipe releasing dart is launched from the surface to wipe the drillpipe ID and release the top SSR casing plug. The drillpipe plug latches and seals in the top SSR plug. The top SSR plug is then pumped to a pressure shutoff on the float shoe. First introduced in the mid-1970s, Halliburton SSR plug sets were the first used in offshore cementing operations from mobile offshore drilling units (MODU). Halliburton SSR cementing plug system enabled offshore cementing to be performed in water depths that exceeded the limitations of fixed platforms. Halliburton SSR cementing plugs have been used in water depths over 9,000 ft and are available in casing sizes 4 1/2 in. through 20 in. SSR plug sets are available with working pressure rating up to 10,000 psi when used with Halliburton’s Super Seal II® float equipment. HAL1076 Halliburton’s SSR® subsurface release cementing plug HALLIBURTON Top plug releasing dart launched ahead of displacement fluid. SSR plug set aluminum insert. Available in 7– 13 3/8 in. www.halliburton.com H05056 06/06 © 2006 Halliburton All Rights Reserved Printed in U.S.A. Top plug lands. Displacement complete. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. HAL13186 HAL13185 HAL13184 SSR plug set plastic insert. Available in 7–20 in. HAL18346 HAL18345 HAL18344 Bottom plug ball released ahead of spacer. NR SSR plug set. Available in 7–20 in.