Laboratory Equipment
Laboratory hardware
81
Laboratory Hardware
The laboratory hardware listed provides a comprehensive range of products suitable for
most general test applications.
Stands, Bossheads and Clamps
Ordering Information
Model number
Description
EL81-0080
EL81-0090
EL81-0094
Bosshead. 12.7 mm V-slot, with 2 clamping screws.
Clamp. Jaw capacity 0 to 88 mm.
Support Assembly.
Comprising retort stand, bosshead and clamp.
Spatulas
Ordering Information
Model number
Description
EL81-0100
EL81-0120
EL81-0140
EL81-0180
Spatula. 100 mm blade with wooden handle.
Spatula 150 mm blade with wooden handle.
Spatula. 200 mm blade with wooden handle.
Chattaway Spatula. 125 mm long.
Scoops and Shovels
Ordering Information
Model number
Description
EL81-0200
EL81-0220
EL81-0222
EL81-0240
Scoop. 70 x 110 x 40 mm, cast aluminium with handle.
Scoop. 120 x 190 x 70 mm, cast aluminium with handle.
Scoop. 250 mm long x 125 mm dia. stainless steel, 5 kg capacity
Shovel. With flat blade 250 x 300 mm. Weight 3 kg
Trowels and Floats
Ordering Information
Model no.
Description
EL81-0310
EL81-0335
Trowel. Gardeners type, stainless steel blade.
Trowel. Gauging with steel blade 200 mm long,
complies with BS 4550.
Float. Plasterer’s type, with steel blade 280 x 115 mm.
Weight 450 g
EL81-0340
165
81
Laboratory Equipment
Laboratory hardware
Rubber Tubing
Ordering Information
Model number
Internal diameter
Outside diameter
EL81-0375
6.5 mm
16.5 mm
Rubber tubing is priced per metre.
EL81-0375 is suitable for vacuum applications.
Watches and Clocks
Ordering Information
Model no.
Description
EL81-0518
Timer Clock. Battery-operated.
Easy to read digital display of hours, minutes and seconds.Timer
counts down and sounds beeping tone. Clock functions
independently of timer. Supplied complete with battery.
Dimensions 13 x 64 x 58 mm (l x w x h).
Stop Watch. LCD quartz watch, features alarm, time/calender
display, 30 minute count in 1/100 sec. Battery-operated.
Dimensions 20 x 60 x 80 mm (l x w x h).
EL81-0521
Miscellaneous Laboratory Hardware
Ordering Information
Model no.
EL81-0480
EL81-0500
EL81-0508
EL81-0594
EL81-0588
EL81-0590
EL81-0701
EL81-0703
EL81-0705
EL81-0708
EL81-0710
EL81-0715
EL81-0800
EL81-0805
EL81-4765
EL81-4775
EL81-5100
166
Description
Crucible Tongs. Straight,
Heavy-duty Rubber Gloves
Heat-resistant Gloves,
with gauntlet
Chisel, masonry type
Vernier Callipers
Vernier Callipers, LCD
Wax Ladle,
for molten wax pouring
Wax Brush
Wire Brush
Wire Saw
Trimming Knife
Straight Edge
Magnetic Base
Engineer’s Steel Rule
Polythene Bag
Polythene Bag, pack of 100
Rubber Bucket
Size/capacity
200 mm long
Weight
100 g
700 g
500 g
300 x 20 mm
200 x 0.02 mm
200 x 0.01 mm
1 kg
100 g
100 g
500 g
700 g
300 g
700 g
130 mm long
150 g
455 mm long
600 g
3 kg
300 mm
100g
380 x 254 mm
25 g
450 mm x 1000 mm 205 g
9 litres (2 gal)
3 kg
Laboratory Equipment
Laboratory hardware
81
Moisture Content Tin and Sample Containers
Ordering Information
Model number
EL81-2979
EL81-3000
EL81-3040
EL81-3060
EL81-3500
EL81-3540
EL81-3545
Description
Moisture Content Tin. Tin plate, (unnumbered).
90 mm diameter x 20 mm deep. 90 g capacity.
Sample Container. Tinned Steel. Lever Lid, 0.5 litres
Sample Container. Tinned Steel. Lever Lid, 2.5 litres
Sample Container. Tinned Steel. Lever Lid, 10 litres
Sample Container. Plastic, Snap-on lid, 1 litre
Sample Container. Plastic, Snap-on lid, 10 litres
Transport/storage Container. 22 litres
Weight
18 g
100 g
200 g
600 g
100 g
600 g
1 kg
Sample Trays
Ordering Information
Model number
EL81-4020
EL81-4030
EL81-4080
EL81-4160
EL81-4230
EL81-4700
Description
Sample Tray. Heavy-duty, galvanised steel, nesting
306 x 306 x 38 mm
Sample Tray. Heavy-duty, galvanised steel, nesting
406 x 406 x 50 mm
Sample Tray. Heavy-duty, galvanised steel, nesting
610 x 610 x 63 mm
Sample Tray. Heavy-duty, galvanised steel, nesting
910 x 910 x 76 mm
Sample Tray. Heavy-duty, galvanised steel, nesting
1200 x 1160 x 50 mm
Sample Tray. Stainless steel spinning, without seams
305 mm diameter x 50 mm
Weight
1.10 kg
1.60 kg
2.60 kg
8 kg
12.50 kg
1.0 kg
Wire Baskets
Ordering Information
Model number
Dimensions
EL81-4819
Wire Basket. BS 812 Type 1, EN 1367-2
65 mm dia x 80 mm deep, 150 µm wire mesh.
Wire Basket. BS 812 Type 2, EN 1367-2
95 mm dia x 120 mm deep, 600 µm wire mesh.
Wire Basket. BS 812 Type 3, EN 1367-2
95 mm dia x 120 mm deep, 1.18mm wire mesh.
Wire Basket. BS 812 Type 4, EN 1367-2
120 mm dia x 120 mm deep, 3.35 mm wire mesh.
EL81-4821
EL81-4823
EL81-4825
Beakers and Bowls
Ordering Information
Model number
Description
EL81-4779
EL81-5020
EL81-5040
EL81-5060
Beaker. 500 ml capacity, aluminium
Bowl. 2 litre capacity, stainless steel
Bowl. 6 litre capacity, stainless steel.
Bowl. 11 litre capacity, stainless steel
167
82
Laboratory Equipment
Glass and plastic ware
Glass and Plasticware
Beakers and Covers
Ordering Information
Model no.
Description
EL82-0120
EL82-0200
EL82-0220
EL82-0260
Beaker, borosilicate glass, squat form
100 ml
Beaker, borosilicate glass, squat form
600 ml
Beaker, borosilicate glass, squat form
1000 ml
Beaker Cover, watch glass. Borosilicate glass,
100 mm dia
Conical Beaker, with a 100 mm diameter glass cover. 500 ml
Beaker, polypropylene, squat form with spout
100 ml
Beaker, polypropylene, squat form with spout
600 ml
EL82-0276
EL82-1620
EL82-1680
Capacity
Measuring Cylinders, BS
Ordering Information
Model no.
Description
Capacity
EL82-0380
EL82-0420
EL82-0460
EL82-0500
EL82-1840
Measuring Cylinder, soda glass, spouted, BS EN 4788
Measuring Cylinder, soda glass, spouted, BS EN 4788
Measuring Cylinder, soda glass, spouted, BS EN 4788
Measuring Cylinder, soda glass, spouted, BS EN 4788
Measuring Cylinder, plastic with spout,
graduated to BS 5404
Measuring Cylinder, plastic with spout,
graduated to BS 5404
Measuring Cylinder, plastic with spout,
graduated to BS 5404
Measuring Cylinder, plastic with spout,
graduated to BS 5404
100 ml
250 ml
500 ml
1000 ml
100 ml
EL82-1860
EL82-1880
EL82-1900
250 ml
500 ml
1000 ml
Pipettes and Burettes
Ordering Information
Model no.
Description
Capacity
EL82-1240
Graduated Pipette, Type 1, Class B, BS 700
0.10 ml sub-divisions
Graduated Pipette, Type 1, Class B, BS 700
0.25 ml sub-divisions
Bulb Pipette, BS 1583
Burette, soda glass with single-bore stopcock,
BS EN ISO 385 Class B, 0.10 sub-divisions
10 ml
(nominal)
20 ml
(nominal)
50 ml
50 ml
(nominal)
EL82-1260
EL82-1300
EL82-1440
Evaporating Dishes
Ordering Information
Model no.
Description
EL82-1970
Evaporating Dish, shallow form with spout, porcelain
100 x 40 mm nominal diameter x height
Evaporating Dish, shallow form with spout, porcelain
150 x 45 mm nominal diameter x height
Evaporating Dish, shallow form with spout, porcelain
200 x 55 mm nominal diameter x height
EL82-2000
EL82-2010
168
Laboratory Equipment
Glass and plastic ware
82
Funnels and Flasks
Ordering Information
Model no.
Description
EL82-1000
Volumetric Flask soda glass,
100 ml
stoppered to BS ISO 1042 Class B
Volumetric Flask soda glass,
250 ml
stoppered to BS ISO 1042 Class B
Volumetric Flask soda glass,
500 ml
stoppered to BS ISO 1042 Class B
Volumetric Flask soda glass,
1000 ml
stoppered to BS ISO 1042 Class B
Conical Flask (Erlenmeyer), borosilicate glass,
500 ml
wide mouth graduated, 100 ml sub-divisions
(nominal)
Conical Flask (Erlenmeyer), borosilicate glass,
250 ml
wide mouth graduated, 50 ml sub-divisions
(nominal)
Filter Flask conical type with integral side arm
1000 ml
Buchner Funnel size no. 5 accepts 110 mm diameter filter paper.
Supplied with rubber bung. For use with EL82-2340 Filter Flask.
Funnel polythene, 200 mm diameter
EL82-1020
EL82-1040
EL82-1060
EL82-1120
EL82-1140
EL82-2350
EL82-2200
EL82-2660
Capacity
Desiccators
Ordering Information
Model no.
Description
EL82-2100
Desiccator non-vacuum type 200 mm internal diameter
borosilicate glass. Supplied with perforated zinc disc.
Desiccator Cabinet non-vacuum Internal dimensions
300 x 300 mm acrylic plastic.
Supplied with 1 shelf and 2 desiccant trays.
Desiccator vacuum type 280 mm internal diameter, soda glass.
Supplied with perforated zinc disc and stopcock.
Safety Cage for EL82-2170.
EL82-2110
EL82-2170
EL82-2180
Bottles, Containers and Crucibles
Ordering Information
Model no.
Description
EL82-1540
Weighing Bottle glass with stopper,
25 x 50 mm diameter x height
Wash Bottle polythene, 500 ml capacity
Reagent Bottle 1000 ml, amber glass plastic stopper
Glass Jar approximately 1 kg capacity, complete with lid and seal.
Polythene Bottle wide neck, screw cap, 1 litre
Polythene Bottle wide neck, screw cap, 5 litres
Silica Crucible 35 mm diameter x 38 mm high
Porcelain Crucible 30 ml capacity
Porcelain Lid for EL82-3320
EL82-2500
EL82-3060
EL82-3110
EL82-3145
EL82-3149
EL82-3300
EL82-3320
EL82-3325
Syringe and Stirring Rod
Ordering Information
Model no.
Description
EL82-2820
EL82-4005
Syringe with rubber bulb. Weight 500 g
Glass Stirring Rod 7 mm diameter x 200 mm long. Pack of 10
169
82
Laboratory Equipment
Temperature measurement
Hydrometers, Aggregate Testing
BS 812, EN 1367-2, ASTM C88, AASHTO T104
Ordering Information
EL82-3505
Hydrometer, type L50, ASTM C 88 graduated 1150 to 1200 relative density (used
with sodium sulphate method).
EL82-3510
Hydrometer, type L50, ASTM C 88 graduated 1250 to 1300 relative density (used
with magnesium sulphate method).
General Glass Thermometers
Model number
Range
Divisions
Immersion
EL82-5020
EL82-5230
–10 to +110 ºC
–10 to +250 ºC
1.0 ºC
1.0 ºC
76 mm
76 mm
Portable Dial-type Thermometers
Model number
Description
Range ºC
EL82-5243
Portable Thermometer, 64 mm diameter dial
with a 650 mm long stem
Portable Thermometer, 25 mm diameter dial
with a 90 mm long stem and protective sheath
Portable Thermometer, 25 mm diameter dial
with a 100 mm long stem and protective sheath
Portable Thermometer, 50 mm diameter dial
with a 200 mm long stem and protective sheath
Portable Thermometer, 50 mm diameter dial
with a 180 mm long stem
Portable Thermometer complies with BS 598
for temperature measurement of bituminous mixes
prior to and during laying. Graduated in 2ºC divisions
with a stem length of 300 mm and accurate to ± 2ºC
50 to 250
EL82-5244
EL82-5245
EL82-5246
EL82-5247
EL82-5248
–30 to +60
0 to 250
–20 to +60
50 to 250
0 to 250
IP Thermometers
Model number
IP ref
Range ºC
Divisions
Immersion
EL82-5255
EL82-5257
EL82-5261
EL82-5263
EL82-5265
IP38C
IP28C
IP60C
IP61C
IP89C
23
–6
–2
30
–1
0.1ºC
2.0ºC
0.2ºC
0.5ºC
0.5ºC
Total
25 mm
Total
Total
Total
to
to
to
to
to
27
+400
+80
200
+175
General-purpose Thermometers
Model no.
Description
Range
EL82-5311
Surface Thermometer flat surface type,
with approximately 64 mm diameter dial.
Accuracy ±3ºC
Protected Thermometer
fitted in protective case
Maximum and Minimum Thermometer
0 to 160ºC
EL82-5314
EL82-5315
170
–15 to +60ºC
–38 to +50ºC
Laboratory Equipment
Temperature measurement
82
Digital Thermometers
Hand-held Digital Thermometers
■ Splash-proof membrane circuitry
■ Complete with probes and case
This Hand-held Digital Thermometer is ideal for laboratory or site use.The unit provides
for Celsius and/or Fahrenheit display to a clear LCD, powered by a standard 9 V PP3
battery or equivalent.The thermometer is supplied complete with surface probe,
penetration probe, battery and case.
Specification
Range
Resolution and accuracy
Cold junction (automatic)
Weight
–75 to +1200ºC or –30 to +199.9ºC or –75 to +1999ºF
1ºC (–75 to +1200ºC), 0.2 % ± 0.1ºC,
0.1ºC (–30 to +199.9ºC) 0.2% ± 1.0ºC,
1ºF (–75 to +1999ºF), 0.2 % ±2.0 ºF
0 to 45ºC
500 g
Ordering Information
EL82-5442
Digital Thermometer –75°C to +1200ºC
Accessory
EL82-5440/10
Thermocouple Wire 3 metre length, suitable for EL82-5440
Digital Thermometer.The thermocouple is NiCr/NiAi PTFE
covered with a naked exposed junction. Supplied with a coupling
unit the maximum reading is 250ºC with a tip diameter of 0.5 mm.
(Pack of 5).
Digital Pocket Thermometer
Specification
Dimensions (l x w x h)
Range
Resolution
Accuracy
Weight
150 x 45 x 19 mm
–49.9 to 199.9ºC
0.1ºC
±0.4ºC
105 g
Ordering Information
EL82-5420
Digital Pocket Thermometer. The stainless steel probe carries a highly accurate
platinum sensor and when not in use folds back in to the side of the instrument. With a
clear 8 mm high LCD display this instrument is powered by a standard 12 V MN21 battery
or equivalent.
171
82
Laboratory Equipment
General
Chemicals, Test and Reference Materials
Ordering Information
Model no.
Description
EL82-7031
Paraffin Wax. No hazard (congealing point approx 49ºC).
5 kg block.
Silica Gel coarse. No hazard. 500 g
Sodium Sulphate anhydrous. No hazard. 3 kg
Mould Oil. No hazard. 25 litre drum
Standard Sand 600/300 µm, Fraction C,
No hazard. 50 kg
Standard Sand 300/150 µm, Fraction D,
No hazard. 50 kg
Standard Sand ASTM. No hazard. 50 kg
Standard Sand 850/600 µm, BS 4550:Part 6. No hazard.
EL82-7091
EL82-7171
EL82-7341
EL82-7401
EL82-7411
EL82-7441
EL82-7451
Filter Papers
Fast
EL82-7861
Medium
EL82-7901
Slow
EL82-7931
Box of 100
Filter Paper no. 55 x 400 mm diameter
Filter Paper no. 74 x 150 mm diameter
Filter Paper no. 95 x 110 mm diameter
Vacuum Pumps
Specification
Construction
Ultimate vacuum
Water supply pressure required
Weight
Moulded plastic body
12 to 15 torr (12 to 15 mm Hg)
14 kPa
200 g
Ordering Information
EL82-7700
Filter Pump
Specification
Type
Pump
Ultimate vacuum
Displacement
Electrical supply
Weight
Single stage
Oil filled rotary
4 x 10–2 mbar
42 Litres per minute (2.4 m3/hour)
220 – 240 V AC, 50 Hz, 1 ph
12.7 kg
Ordering Information
EL82-7720/01
Vacuum Pump
Accessory
Rubber Tubing
Spare
EL82-7720/10
172
Vacuum Oil 4 litre
see EL81-0375
Laboratory Equipment
General
82
Water Baths
Specification
EL82-8500/01
EL82-8600/01
Capacity
Working area
Tray
Max water depth
Controller
Temperature
Range ºC
Stability ºC
Electrical supply
Rated power kW
Weight
12 litres
210 x 300 mm
Yes
130 mm
Digital
18 litres
390 x 300 mm
Yes
130 mm
Digital
0 to 99.9
± 0.1
220 – 240 V AC, 50 Hz, 1 ph
1.5
8.1 kg
0 to 99.9
± 0.1
220 – 240 V AC, 50 Hz, 1 ph
1.5
9.2 kg
Distilled Water Still
Specifications
Dimensions (l x w x h)
Boiling chamber
Condenser
Output
Electrical supply
Rated power
Weight
590 x 530 x 940 mm
Glass
Borosilicate glass
3.5 litres/hr when permanently connected to water supply
220 – 240 V AC, 50 Hz, 1 ph
2.75 kW
12 kg
Ordering Information
EL82-8020/01
Distilled Water Still
Masonry Saw
Specification
Dimensions (l x w x h)
Cutting depth with 300 mm diameter blade
Electrical supply
Rated power
Weight
1195 x 705 x 1350 mm
110 mm
220-240 V AC, 50 Hz, 1 ph, separate fused
power supply and switching required
2200 W
120 kg
Ordering Information
EL82-8950/01
Masonry Saw
Accessories
EL82-8950/12
Diamond Blade wet cutting. Blade diameter 350mm, depth of
cut 110 mm
173
82
Laboratory Equipment
General
Air Compressors
When a laboratory requires a number of constant but independent and variable pressure
sources, the use of a pneumatic compressor is recommended.
Ordering Information
Model number
EL83-1730/01
EL83-1735/01
EL83-1740/03
Dimensions (l x w x h) (mm)
Free air delivery
Receiver capacity
Maximum pressure
Continuous working pressure
Electrical supply
483 x 457 x 864
2.0 cfm
50 litres
1000 kPa
700 kPa
220 – 240 V AC
50 Hz, 1 ph
No
57 kg
1321 x 457 x 914
6.0 cfm
116 litres
1380 kPa
1000 kPa
220 – 240 V AC
50 Hz, 1 ph
Yes
149 kg
1500 x 500 x 950
16.0 cfm
150 litres
1380 kPa
1000 kPa
400 – 440 V AC
50 Hz, 3 ph
Yes
206 kg
Water Trap
Weight
Furnaces
Muffle furnaces are widely used for determining various properties of construction
materials.
Note:
EL83-4160/01 complies with the following Standards: BS 3797; EN 13279-2; ISO 6245; IP 4.
EL83-4140/01 complies with the following Standards: BS 1016:4; EN13454-2; ISO 344, 1171;
ASTM D2361,D2795, D3714.
Ordering Information
Model number
EL83-4160/01
EL83-4140/01
Dimensions (l x w x h)
External
Work chamber
Internal volume
Maximum temperature
Electrical supply
Power supply
Weight
410 x 410 x 580 mm
200 x 180 x 165 mm
5.9 Litres
1000ºC
220 – 240 V AC, 50 Hz, 1 ph
2000 W
15 kg
740 x 430 x 650 mm
455 x 170 x 90 mm
6.9 Litres
1100ºC
220 – 240 V AC, 50 Hz, 1 ph
3900 W
63 kg
Note: EL83-4160/01 not suitable for Ashing
A
Back type
B
C
Dial Gauges
Model
number
Diameter
mm
Travel
mm
Graduation
mm
Scale
Anvil
Back
type
EL83-5416
EL83-5421
EL83-5451
EL83-5456
57
57
57
57
25
25
10
10
0.01
0.01
0.002
0.01
RH
RH
RH
RH
Ball
Flat
None
Ball
C
C
B
A
Key:
174
RH scale – clockwise rotation.
LH scale – anticlockwise rotation
Back type – see diagram