Optic Fiber Converters for DSC POWER, PARADOX EVO, SATEL INTEGRA Buses
BREAK-TDW and RDW-PDS
BOX*
BOX + DIN35-LOCK*
▪ Digital modulation
▪ MM/SM universal (WDM)
▪ 2x data BUS (0-10V)
▪ 1x Relay LOCK NO/NC
▪ Overvoltage protection
▪ Current limiter in supply
▪ Working temperature from – 40°C to +70°C
ORDERING NAME
CODE
SUPPLY
FIWRE-PDS*
1-004-220
10-20VDC**
BREAK-TDW-PDS-BOX
1-504-274
10-20VDC**
BREAK-RDW-PDS-BOX
1-604-275
10-20VDC**
* set of converters; holders for mounting to DIN35 included
** BUS supply
Connection to the KEYBUS bus of DSC POWER system
RED.
BLK.
YEL.
GRN.
BUS
KEYBUS
TDW-PDS-BOX
1x MM/SM
1
+13,85V
BLK.
YEL.
GRN.
RDW-PDS-BOX
M1
M2
system keyboards and modules
Connection to the BUS bus of PARADOX EVO system
RED.
BLK.
YEL.
GRN.
BUS
EVO
TDW-PDS-BOX
1x MM/SM1
+12V
BLK.
YEL.
GRN.
RDW-PDS-BOX
M1
M2
system keyboards and modules
Connection to the expander’s bus of SATEL INTEGRA system
BUS
INTEGRA
BUS2
BUS1
+KPD
COM.
DTM.
CKM.
BUS1
TDW-PDS-BOX
1x MM/SM1
+12V
COM.
DTM.
CKM.
RDW-PDS-BOX
BUS2
DT1
M1
M2
Compatible system
keyboards and modules
CK1
+12V
COM.
DAT.
CLK
1
POWER: max. 6/15km, EVO: max. 6/10km, INTEGRA: max. 6/6km (MM/SM)
www.metel.eu
1/7
Exp1
Exp2
Installation manual REV:201203
BREAK-TDW-PDS, BREAK-RDW-PDS
Optoconverters DSC POWER, PARADOX EVO, SATEL INTEGRA
Description and technical parameters
Optic fiber converters for transmission of system buses of alarm systems DSC POWER, PARADOX EVO and SATEL
INTEGRA.
Parameter
Value
Unit
Note
BUS
Overvoltage protections
600
W
pulse 10/1000 μs
Optics
Output optical power
–14 to –8 / –10 to 0
dBm
SM / MM
Sensitivity
–31
dBm
SM / MM
Optical fibres
1x SM 9/125 - SC connectors
µm
grinding PC
Optical range
Topology
1x MM 50(62.5)/125 - SC conn.
µm
grinding PC
DSC POWER
15 / 6 (6)
km
SM / MM (BUS)
PARADOX EVO
10 / 6 (6)
km
SM / MM (BUS)
SATEL INTEGRA
6 / 6 (6)
km
SM / MM (BUS)
STAR
max. 4
sets
BUS
max. 4
sets
ATTENTION: class 1 LASER PRODUCT COMPLIES WITH 21 CFR 1040.10 and 1040.11 DEN 60825-1-1E
LOCK Relay
NO/NC contact
max. 125VAC/0.5A or 60VDC/0.3A
Power Suply
Voltage
10-20
VDC
Current at 12VDC
Max. 100
mA
Protections
overvoltage / current
Operational range
–40..+70
°C
NC contact closed = communication OK
Environment
600W-pulse 10/1000 μs/reversible
Humidity
max. 95 (non-condensing)
%
Mechanical
Dimensions - w / h / l
110 x 97 x 30 (37)
mm
Parameters
Weight
typ: 0.2
kg
The producer retains the right to change any technical parameters without previous announcement.
www.metel.eu
2/7
from bus
temperature of environment
(with DIN holder)
Installation manual REV:201203
BREAK-TDW-PDS, BREAK-RDW-PDS
Optoconverters DSC POWER, PARADOX EVO, SATEL INTEGRA
Installation and Setting
4. Connect signal wires
Proceed according to the type of alarm system with the
pictures on the following pages.
Connect the data lines from the alarm system to TDWPDS to terminals DATA1 and DATA2. If needed, terminate
the data lines with a PULL-UP resistor on the xDW-PDS
terminal board on the modules side (on the alarm system
side – do not terminate).
1. Mounting
Place TDW-PDS to the side of the alarm system.
Place RDW-PDS to the side of modules (keyboards,
modules...).
Mount the converters to either flat surface or DIN35 rail.
2. Connect supply
12VDC between V+ and GND terminals. Connection of the
supply is indicated by the yellow LED POWER switching
on.
5. Indications
LED PWR - by switching on detects supply
LED LOCK - by switching on detects relay closure
- by switching on detects optics interruption
- by switching on detects failure of a remote
device
LED DATA1 - data line
- red LED Tx blinking – data transmission
- green LED Rx blinking – data reception
LED DATA2 - data line
- red LED Tx blinking – data transmission
- green LED Rx blinking – data reception
Overvoltage protections are grounded through the GND
terminal.
3. Connect optic fiber
terminated by a SC connector (grinding PC). After
interconnection of TDW-PDS and RDW-PDS LED LOCK
switches off. The reach of the fiber is changing with the
number of optoconverters sets used.
The length of the optical fiber in a system for 4 sets
connected in series in a bus is max. 6km for both SM and
MM fiber. Using of more than 4 pairs of sets in a bus is
not recommended. In star topology it is possible to
connect max. 16 optoconverters sets to an alarm system.
TDW-PDS
Tx - 1310nm
Rx - 1550nm
RDW-PDS
Tx - 1550nm
Rx - 1310nm
PORT2
GROUND
DATA BUS2 <
+10-20VDC
RELAY
max. 125VAC / 0.5A
max. 60VDC / 0.3A
WHEN IS
- LOCAL DEVICE IN DE-ENERGIZED STATE
- REMOTE DEVICE IS IN FAILURE
- OPTICS IS CORRUPTED
COM AND NO ARE CONNECTED.
PORT1
GROUND
DATA BUS1 <
+10-20VDC
WHEN IS
- LOCAL DEVICE IS POWERED
- REMOTE DEVICE IS WORKING
- OPTICS IS OK
COM AND NC ARE CONNECTED.
www.metel.eu
3/7
Installation manual REV:201203
BREAK-TDW-PDS, BREAK-RDW-PDS
Optoconverters DSC POWER, PARADOX EVO, SATEL INTEGRA
DSC POWER
TDW-PDS
PORT2
PORT1
RED BLK YEL GRN
FIBRE OPTIC
SM 15km / MM 6km
13,85VDC
+
1k
RED BLK YEL GRN
1k
PORT2
PORT1
TERMINATION
2x PULL-UP
1kΩ
RDW-PDS
A BUS CONNECTION AND TERMINATION
MAIN
board
MODULE
RED.
BLK.
YEL.
GRN.
TDW-PDSBOX
RDW-PDSBOX
MODULE
MODULE
1k
1k
1k
1k
1k
1k
1k
1k
TDW-PDSBOX
RDW-PDSBOX
TDW-PDSBOX
RDW-PDSBOX
FIBRE OPTIC max. SM 6km / MM 6km
www.metel.eu
MODULE
4/7
TDW-PDSBOX
RDW-PDSBOX
Installation manual REV:201203
BREAK-TDW-PDS, BREAK-RDW-PDS
Optoconverters DSC POWER, PARADOX EVO, SATEL INTEGRA
PARADOX DIGIPLEX EVO
TDW-PDS
PORT2
PORT1
RED BLK GRN YEL
FIBRE OPTIC
SM 10km / MM 6km
12VDC
+
1k
RED BLK GRN YEL
1k
PORT2
PORT1
RDW-PDS
A BUS CONNECTION
MAIN
board
MODULE
RED.
BLK.
YEL.
GRN.
TDW-PDSBOX
RDW-PDSBOX
MODULE
MODULE
1k
1k
1k
1k
1k
1k
1k
1k
TDW-PDSBOX
RDW-PDSBOX
TDW-PDSBOX
RDW-PDSBOX
FIBRE OPTIC max. SM 6km / MM 6km
www.metel.eu
MODULE
5/7
TDW-PDSBOX
RDW-PDSBOX
Installation manual REV:201203
BREAK-TDW-PDS, BREAK-RDW-PDS
Optoconverters DSC POWER, PARADOX EVO, SATEL INTEGRA
SATEL INTEGRA
TDW-PDS
PORT2
PORT1
COM +KPD DTM CKM
DT1 CK1
FIBRE OPTIC
SM 6km / MM 6km
EXPANDER
EXPANDER
+12V COM DAT CLK
12VDC
+
+KPD COM CKM DTM
PORT2
PORT1
RDW-PDS
A BUS CONNECTION
MAIN
board
MODULE
MODULE
MODULE
MODULE
RED.
BLK.
YEL.
GRN.
TDW-PDSBOX
RDW-PDSBOX
TDW-PDSBOX
RDW-PDSBOX
TDW-PDSBOX
RDW-PDSBOX
FIBRE OPTIC max. SM 6km / MM 6km
www.metel.eu
6/7
TDW-PDSBOX
RDW-PDSBOX
Installation manual REV:201203
BREAK-TDW-PDS, BREAK-RDW-PDS
Optoconverters DSC POWER, PARADOX EVO, SATEL INTEGRA
119.00
30.00
xDW-PDS-BOX + DIN35-LOCK
73.00
73.00
xDW-PDS-BOX
109.00
REVISION: 20110727 - PDS, 20111128 – PULL-UP 1kΩ
www.metel.eu
7/7