DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 1 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
New Cisco Media Convergence Servers
PB384010
®
Cisco is pleased to announce a new series of media convergence servers and Cisco
Unified CallManager Appliances to continue to deliver converged voice, video, and data
solutions for Cisco Unified Communications customers.
Cisco is also releasing a new version of the Cisco IP Telephony Operating System:
2000.4.4. This IP telephony operating system is available as a fresh install. It includes
support for the new media convergence servers as well as currently shipping media
convergence servers.
For additional information about the new series of media convergence servers and Cisco
Unified CallManager Appliances, refer to
http://www.cisco.com/en/US/products/hw/voiceapp/ps378/index.html.
The new servers are introduced in the following sections.
Cisco MCS-7825-H2-IPC2
Occupying only one mounting space on a standard third-party rack, the Cisco MCS-7825-H2-IPC2
features an Intel 950 dual-core 3.4-GHz processor, 2-GB synchronous dynamic RAM (SDRAM),
and two 80-GB cold-swap Serial ATA (SATA) hard disks. It provides high reliability though the use
of Redundant Array of Independent Disks (RAID) 1 disk mirroring. The Cisco MCS-7825-H2-IPC2
requires Cisco Windows OS 2000.4.4 for Cisco CallManager 3.3 or Cisco Unified CallManager 4.0,
4.1, or 4.2. Refer to the data sheet for the part number used in conjunction with your specific
application. Please note that this server cannot be used to upgrade to Cisco Unified CallManager
5.0.
Cisco MCS 7825-H2 Unified CallManager Appliance
The Cisco MCS 7825-H2 Unified CallManager Appliance is an entry-level rack-mounted appliance
for Cisco Unified CallManager 5.1; it features an Intel 950 dual-core 3.4-GHz processor, 2-GB
SDRAM, and two 80-GB SATA hard disks using RAID 1. The server appliance is preinstalled with
an operating system and the Cisco Unified CallManager 5.1 application. It is fully operational upon
startup, requiring entry of just a few configuration items such as IP address and domain. The Cisco
MCS 7825-H2 Unified CallManager Appliance requires Cisco Unified CallManager Release 5.1.1.
The part number for this appliance is MCS7825H2-K9-CMA2.
Cisco MCS-7825-I2-IPC2
The Cisco MCS-7825-I2-IPC2 occupies only one mounting space on a standard third-party rack
and features an Intel 950 dual-core 3.4-GHz processor, 2-GB SDRAM, and two 80-GB cold-swap
SATA hard disks. It provides high reliability though the use of RAID 1 disk mirroring. The Cisco
MCS-7825-I2-IPC2 requires Cisco Windows OS 2000.4.4 for Cisco CallManager 3.3 or Cisco
Unified CallManager 4.0, 4.1, or 4.2. Refer to the data sheet for the part number used in
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
Page 1 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 2 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
conjunction with your specific application. Please note that this server cannot be used to upgrade
to Cisco Unified CallManager 5.0.
Cisco MCS 7825-I2 Unified CallManager Appliance
The Cisco MCS 7825-I2 Unified CallManager Appliance, an entry-level rack-mounted appliance for
Cisco Unified CallManager 5.0, features an Intel 950 dual-core 3.4G-Hz processor, 2-GB SDRAM,
and two 80-GB SATA hard disks using RAID 1. The server appliance is preinstalled with an
operating system and the Cisco Unified CallManager 5.1 application. It is fully operational upon
startup, requiring entry of just a few configuration items such as IP address and domain. The Cisco
MCS 7825-I2 Unified CallManager Appliance requires Cisco Unified CallManager Release 5.1.1.
The part number for this appliance is MCS7825I2-K9-CMA2.
Cisco MCS 7835-H2
The Cisco MCS 7835-H2 occupies only two mounting spaces on a standard third-party rack and
features an Intel 5140 dual-core Xeon 2.33-GHz processor, 2-GB SDRAM, and two 72-GB Serial
Attached SCSI (SAS) hard disks. It provides high reliability through the use of RAID 1 disk
mirroring and by providing redundant power supplies. Remote management is also provided
through support of HP Integrated Lights Out (iLO) 2 with both iLO Standard and iLO Advanced
licensing provided at no additional cost. The Cisco MCS 7835-H2 requires Cisco Windows OS
2000.4.4 for Cisco CallManager 3.3 or Cisco Unified CallManager 4.0, 4.1, or 4.2. Refer to the data
sheet for the part number used in conjunction with your specific application. Please note that this
server cannot be used to upgrade to Cisco Unified CallManager 5.0.
Cisco MCS 7835-H2 Unified CallManager Appliance
The Cisco MCS 7835-H2 Unified CallManager Appliance is a high-availability server platform for
Cisco Unified CallManager 5.1 and greater and an integral part of a complete, scalable
architecture for a new generation of high-quality IP communications solutions for enterprise data
networks. Delivering the high performance and availability that today’s enterprise networks
demand, this solution is easy to deploy and highly cost effective. The server appliance is
preinstalled with an operating system and Cisco Unified CallManager 5.1 or greater; it is fully
operational upon startup, requiring entry of just a few configuration items such as IP address and
domain. At just 2 rack units (2RU) high, the Cisco MCS 7835-H2 offers tremendous power in a low
profile chassis that minimizes rack space. It supports up to 2,500 IP phones per appliance and up
to 10,000 IP phones in a cluster configuration. The part number for this appliance is MCS7835H2K9-CMA2.
Cisco MCS 7835-I2
The Cisco MCS 7835-I2 occupies only two mounting spaces on a standard third-party rack and
features an Intel 5140 dual-core Xeon 2.33-GHz processor, 2-GB SDRAM, and two 72-GB SAS
hard disks. It provides high reliability through the use of RAID 1 disk mirroring and by providing
redundant power supplies. Remote management is also provided through IBM RSA II support at
no additional cost. The Cisco MCS 7835-I2 requires Cisco Windows OS 2000.4.4 for Cisco
CallManager 3.3 or Cisco Unified CallManager 4.0, 4.1, or 4.2. Refer to the datasheet for the part
number used in conjunction with your specific application. Please note that this server cannot be
used to upgrade to Cisco Unified CallManager 5.0.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
Page 2 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 3 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
Cisco MCS 7835-I2 Unified CallManager Appliance
The Cisco MCS 7835-I2 Unified CallManager Appliance is a high-availability server platform for
Cisco Unified CallManager 5.1 and greater and an integral part of a complete, scalable
architecture for a new generation of high-quality IP communications solutions for enterprise data
networks. Delivering the high performance and availability that today’s enterprise networks
demand, the solution is easy to deploy and highly cost effective. The server appliance is
preinstalled with an operating system and Cisco Unified CallManager 5.1 or greater. It is fully
operational upon startup, requiring entry of just a few configuration items such as IP address and
domain. At just 2RU high, the Cisco MCS 7835-I2 Unified CallManager Appliance packs
tremendous power in a low-profile chassis that minimizes rack space. It can support up to 2,500 IP
phones per server and 10,000 IP phones per cluster. The part number for this appliance is
MCS7835I2-K9-CMA2.
Cisco MCS 7845-H2
The Cisco MCS 7845-H2 occupies only two mounting spaces on a standard third-party rack and
features dual Intel 5140 dual-core Xeon 2.33-GHz processors, 4-GB SDRAM, and four 72-GB SAS
hard disks. It provides high reliability through the use of RAID 1 disk mirroring and by providing
redundant power supplies. Remote management is also provided through support of HP iLO 2 with
both iLO Standard and iLO Advanced licensing provided at no additional cost. The Cisco MCS
7845-H2 requires Cisco Windows OS 2000.4.4 for Cisco CallManager 3.3 or Cisco Unified
CallManager 4.0, 4.1, or 4.2. Refer to the datasheet for the part number used in conjunction with
your specific application. Please note that this server cannot be used to upgrade to Cisco Unified
CallManager 5.0.
Cisco MCS 7845-H2 Unified CallManager Appliance
The Cisco MCS 7845-H2 Unified CallManager Appliance is a high-availability server platform for
Cisco Unified CallManager 5.1 and greater and an integral part of a complete, scalable
architecture for a new generation of high-quality IP communications solutions for enterprise data
networks. It delivers the high performance and availability that today’s enterprise networks
demand—and it is easy to deploy and highly cost-effective. The server appliance is preinstalled
with an operating system and Cisco Unified CallManager 5.1 or greater. It is fully operational upon
startup, requiring entry of just a few configuration items such as IP address and domain. At just
2RU high, the Cisco MCS 7845-H2 offers tremendous power in a low profile chassis that
minimizes rack space. The appliance supports up to 7,500 IP phones per appliance and 30,000 IP
phones per cluster. The part number for this appliance is MCS7845H2-K9-CMA2.
Cisco MCS 7845-I2
The Cisco MCS 7845-I2 occupies only two mounting spaces on a standard third-party rack and
features dual Intel 5140 dual-core Xeon 2.33-GHz processors, 4-GB SDRAM, and four 72-GB SAS
hard disks. It provides high reliability through the use of RAID 1 disk mirroring and by providing
redundant power supplies. Remote management is also provided through IBM RSA II support at
no additional cost. The Cisco MCS 7845-I2 requires Cisco Windows OS 2000.4.4 for Cisco
CallManager 3.3 or Cisco Unified CallManager 4.0, 4.1, or 4.2. Refer to the datasheet for the part
number used in conjunction with your specific application. Please note that this server cannot be
used to upgrade to Cisco Unified CallManager 5.0.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
Page 3 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 4 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
Cisco MCS 7845-I2 Unified CallManager Appliance
The Cisco MCS 7845-I2 Unified CallManager Appliance is a high-availability server platform for
Cisco Unified CallManager 5.1 and greater and an integral part of a complete, scalable
architecture for a new generation of high-quality IP communications solutions for enterprise data
networks. It delivers the high performance and availability that today’s enterprise networks
demand—and is easy to deploy and highly cost-effective. The server appliance is preinstalled with
an operating system and Cisco Unified CallManager 5.1 or greater. It is fully operational upon
startup, requiring entry of just a few configuration items such as IP address and domain. At just
2RU high, the Cisco MCS 7845-I2 Unified CallManager Appliance offers tremendous power in a
low profile chassis that minimizes rack space. The appliance supports up to 7,500 IP phones per
appliance and 30,000 IP phones per cluster. The part number for this appliance is MCS7835I2-K9CMA2.
New Servers Added to the Software-Only List
The new Cisco Windows OS 2000.4.4 and Cisco Unified CallManager 5.1 now provide support for
additional HP and IBM platforms for Cisco Unified CallManager. The following platform models
have been added to supported third-party list:
HP DL320-G4 using Intel 950 3.4-GHz processor
HP DL380-G5 using Intel Xeon 5140 2.33-GHz processor(s)
IBM xSeries 306m model 8849-K2Y using Intel 950 3.4-GHz processor
IBM x3650 model 7979-5AY using Intel Xeon 5140 2.33-GHz processor(s)
Please note that these servers cannot be used for Cisco Unified CallManager 5.0. For complete
details for ordering the supported HP and IBM servers for Cisco Unified CallManager, refer to
http://www.cisco.com/go/swonly.
End of Sale Announced for Selected Cisco MCS Platforms
The end of sale has been announced for the following platforms:
Cisco MCS 7835-H1
Cisco MCS 7835-H1 Unified CallManager Appliance
Cisco MCS 7835-I1
Cisco MCS 7835-I1 Unified CallManager Appliance
Cisco MCS 7845-H1
Cisco MCS 7845-H1 Unified CallManager Appliance
Cisco MCS 7845-I1
Cisco MCS 7845-I1 Unified CallManager Appliance
The last day to order these platforms is February 13, 2007.
Refer to the individual end-of-sale announcements for more details.
For additional information about end-of-sale and end-of-life notices, refer to
http://www.cisco.com/en/US/products/prod_end_of_life.html.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
Page 4 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 5 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
Orderability and FCS Dates
Orderability for the following bare metal server platforms and the associated install kits with OS
2000.4.4 is December 15, 2006:
MCS-7825-H2-IPC2
MCS-7825-I2-IPC2
MCS-7835-H2-IPC1
MCS-7835-I2-IPC1
MCS-7845-H2-IPC1
MCS-7845-I2-IPC1
Orderability for the Cisco Unified CallManager Appliances with the following part numbers is
December 15, 2006:
MCS7825H2-K9-CMA2
MCS7825I2-K9-CMA2
MCS7835H2-K9-CMA2
MCS7835I2-K9-CMA2
MCS7845H2-K9-CMA2
MCS7845I2-K9-CMA2
First customer shipment (FCS) for the following bare metal server platforms and the associated
install kits with OS 2000.4.4 is December 22, 2006:
MCS-7825-H2-IPC2
MCS-7825-I2-IPC2
MCS-7835-H2-IPC1
MCS-7835-I1-IPC1
MCS-7845-H2-IPC1
MCS-7845-I2-IPC1
First customer shipment for the Cisco Unified CallManager Appliances with the following part
numbers is February 1, 2007:
MCS7825H2-K9-CMA2
MCS7825I2-K9-CMA2
MCS7835H2-K9-CMA2
MCS7835I2-K9-CMA2
MCS7845H2-K9-CMA2
MCS7845I2-K9-CMA2
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
Page 5 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 6 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
Minimum OS Release Requirements
The minimum OS release to support these new servers is OS 2000.4.4 for Windows-based
applications and Cisco Unified CallManager 5.1.1 for Cisco Unified CallManager 5.1. All Cisco
Unified CallManager software kit part numbers for new installations will be changing with the
introduction of OS 2000.4.4. Cisco Unified CallManager new install kits not containing OS 2000.4.4
will not work with the new servers.
Cisco Unified CallManager Ordering Notes
Cisco CallManager 3.3, Cisco Unified CallManager 4.0, Cisco Unified CallManager 4.1, Cisco
Unified CallManager 4.2, and Cisco Unified CallManager 5.1 are currently supported by the new
servers. There will be a short interval while the ordering tool is configured to change out the old
servers for the new servers in the following top-level part numbers:
CALLMANAGER-3.3
CALLMANAGER-4.0
CALLMANAGER-4.1
CALLMANAGER-4.2
CALLMANAGER-5.1
While the tool is being configured you will be unable to order by the listed top-level part numbers.
During this change interval you can order the new servers with Cisco CallManager 3.3, Cisco
Unified CallManager 4.0, Cisco Unified CallManager 4.1, Cisco Unified CallManager 4.2, Cisco
Unified CallManager 5.0, or Cisco Unified CallManager 5.1 by ordering the components as spares.
The following tables lists the components that need to be ordered for each configuration:
Table 1.
Cisco CallManager 3.3 Components
Cisco CallManager Version
Server
Order Part Numbers
3.3, 100 users
Cisco MCS 7815-I2
MCS-7815-I2-IPC1
3.3, 300 users
Cisco MCS 7815-I2
CM3.3-7815I2S-1=
MCS-7815-I2-IPC1
CM3.3-7815I2-1=
3.3, 1000 users
Cisco MCS 7825-H2
MCS-7825-H2-IPC1
or MCS-7825-H2-IPC2
and CM3.3-7825H2-1=
3.3, 1000 users
Cisco MCS 7825-I2
MCS-7825-I2-IPC1
or MCS-7825-I2-IPC2
and CM3.3-7825I2-1=
3.3, 2500 users
Cisco MCS 7835-H2
MCS-7835-H2-IPC1
CM3.3-7835H2=
3.3, 2500 users
Cisco MCS 7835-I2
MCS-7835-I2-IPC1
CM3.3-7835I2=
3.3, 5000 users
Cisco MCS 7845-H2
MCS-7845-H2-IPC1
CM3.3-7845H2=
3.3, 5000 users
Cisco MCS 7845-I2
MCS-7845-I2-IPC1
CM3.3-7845I2=
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
Page 6 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 7 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
Table 2.
Cisco Unified CallManager 4.0 Components
Cisco Unified CallManager Version
Server
Order Part Numbers
4.0, 100 users
Cisco MCS 7815-I2
MCS-7815-I2-IPC1
CM4.0-K9-7815I2S-1
4.0, 300 users
Cisco MCS 7815-I2
MCS-7815-I2-IPC1
CM4.0-K9-7815I2-1
4.0, 1000 users
Cisco MCS 7825-H2
MCS-7825-H2-IPC1
or MCS-7825-H2-IPC2
and CM4.0-K9-7825H2-1
4.0, 1000 users
Cisco MCS 7825-I2
MCS-7825-I2-IPC1
or MCS-7825-I2-IPC2
and CM4.0-K9-7825I2-1
4.0, 2500 users
Cisco MCS 7835-H2
MCS-7835-H2-IPC1
CM4.0-K9-7835H2
4.0, 2500 users
Cisco MCS 7835-I2
MCS-7835-I2-IPC1
CM4.0-K9-7835I2
4.0, 5000 users
Cisco MCS 7845-H2
MCS-7845-H2-IPC1
CM4.0-K9-7845H2
4.0, 5000 users
Cisco MCS 7845-I2
MCS-7845-I2-IPC1
CM4.0-K9-7845I2
Table 3.
Cisco Unified CallManager 4.1 Components
Cisco Unified CallManager Version
Server
4.1, 100 users
Cisco MCS 7815-I2
Order Part Numbers
MCS-7815-I2-IPC1
CM4.1-K9-7815I2S-1
4.1, 300 users
Cisco MCS 7815-I2
MCS-7815-I2-IPC1
CM4.1-K9-7815I2-1
4.1, 1000 users
Cisco MCS 7825-H2
MCS-7825-H2-IPC1
or MCS-7825-H2-IPC2
and CM4.1-K9-7825H2-1
4.1, 1000 users
Cisco MCS 7825-I2
MCS-7825-I2-IPC1
or MCS-7825-I2-IPC2
and CM4.1-K9-7825I2-1
4.1, 2500 users
Cisco MCS 7835-H2
MCS-7835-H2-IPC1
CM4.1-K9-7835H2
4.1, 2500 users
Cisco MCS 7835-I2
MCS-7835-I2-IPC1
CM4.1-K9-7835I2
4.1, 5000 users
Cisco MCS 7845-H2
MCS-7845-H2-IPC1
CM4.1-K9-7845H2
4.1, 5000 users
Cisco MCS 7845-I2
MCS-7845-I2-IPC1
CM4.1-K9-7845I2
Table 4.
Cisco Unified CallManager 4.2 Components
Cisco Unified CallManager Version
Server
Order Part Numbers
4.2, 100 users
Cisco MCS 7815-I2
MCS-7815-I2-IPC1
CM4.2-K9-7815I2S-1
4.2, 300 users
Cisco MCS 7815-I2
MCS-7815-I2-IPC1
CM4.2-K9-7815I2-1
4.2, 1000 users
Cisco MCS 7825-H2
MCS-7825-H2-IPC1
or MCS-7825-H2-IPC2
and CM4.2-K9-7825H2-1
4.2, 1000 users
Cisco MCS 7825-I2
MCS-7825-I2-IPC1
or MCS-7825-I2-IPC2
and CM4.2-K9-7825I2-1
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
Page 7 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 8 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
4.2, 2500 users
Cisco MCS 7835-H2
MCS-7835-H2-IPC1
CM4.2-K9-7835H2
4.2, 2500 users
Cisco MCS 7835-I2
MCS-7835-I2-IPC1
CM4.2-K9-7835I2
4.2, 5000 users
Cisco MCS 7845-H2
MCS-7845-H2-IPC1
CM4.2-K9-7845H2
4.2, 5000 users
Cisco MCS 7845-I2
MCS-7845-I2-IPC1
CM4.2-K9-7845I2
Table 5.
Cisco Unified CallManager 5.0 Components
Cisco Unified CallManager Version
Server
Order Part Numbers
5.0, 300 users
Cisco MCS 7815-I2
MCS7815I2-K9-CMA1
5.0, 2500 users
Cisco MCS 7835-H1
LIC-CM5.0-7815-I2=
MCS7835H1-K9-CMA1
LIC-CM5.0-7835-H1=
5.0, 2500 users
Cisco MCS 7835-I1
MCS7835I1-K9-CMA1
LIC-CM5.0-7835-I1=
5.0, 5000 users
Cisco MCS 7845-H1
MCS7845H1-K9-CMA1
LIC-CM5.0-7845-H1=
5.0, 5000 users
Cisco MCS 7845-I1
MCS7845I1-K9-CMA1
LIC-CM5.0-7845-I1=
Table 6.
Cisco Unified CallManager 5.1 Components
Cisco Unified CallManager Version
Server
5.1, 500 users
Cisco MCS 7815-I2
Order Part Numbers
MCS7815I2-K9-CMA2
LIC-CM5.1-7815=
5.1, 1000 users
Cisco MCS 7825-H2
MCS7825H2-K9-CMA2
LIC-CM5.1-7825=
5.1, 1000 users
Cisco MCS 7825-I2
MCS7825I2-K9-CMA2
LIC-CM5.1-7825=
5.1, 2500 users
Cisco MCS 7835-H2
MCS7835H2-K9-CMA2
LIC-CM5.1-7835=
5.1, 2500 users
Cisco MCS 7835-I2
MCS7835I2-K9-CMA2
LIC-CM5.1-7835=
5.1, 5000 users
Cisco MCS 7845-H2
MCS7845H2-K9-CMA2
LIC-CM5.1-7845=
5.1, 5000 users
Cisco MCS 7845-I2
MCS7845I2-K9-CMA2
LIC-CM5.1-7845=
Contact Information
Table 7.
Contact Information
Products
Contact
Call-center servers
Bob Erdman—rerdman@cisco.com
Cisco CallManager 3.3 through Cisco Unified CallManager 4.2 servers
Dave English—denglish@cisco.com
Cisco Unified CallManager 5.0 and 5.1 Appliances
Brett Hamilton—brehamil@cisco.com
®
Cisco Unity servers
®
Cisco MeetingPlace servers
Brent Rindal—brindal@cisco.com
Connie Tang—cotang@cisco.com
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
Page 8 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 9 von 9 :: Datenblatt zum Produkt Cisco HW/SW Callmgr 5.1 mit DC# 447135 ::
Product Bulletin
Printed in USA
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Confidential Information.
C25-384010-00 12/06
Page 9 of 9
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail (info@diskontcomputer.com) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=447135