I. Package Content
III. Conoectors
IV. Front and Rear Panel View
Active LED
1 One 2-port MiniGenie2 KVM Switch
2 Two sets of 6-feet PS/2 cable kits.
3 One Quick Installation Guide
II. Specifications
Model
MiniGenie2 (MG2)
Number of PC Ports
PC Selection Method
Select Push Buttons
Hot Keys
Automatic Scan
Maximum Resolution
Console Connectors
Keyboard (PS/2)
Mouse (PS/2)
Monitor
PC Port Connectors
Keyboard (PS/2)
Mouse (PS/2)
Monitor
Active LED
SCAN LED
Scan Interval Time
Maximum Cable Length
to Console
to Computers
Power
Weight
Dimension
Operating Environment
Emission
2
Yes
Yes
Yes
1600x1280
1 Mini-DIN6/F
1 Mini-DIN6/F
1 HDB15/F
2 Mini-DIN6/F
2 Mini-DIN6/F
2 HDB15/M
2
1
10 Seconds
6 feet (2 meters)
30 feet (10 meters)
Not Required
2.0 lbs (not include cables)
5.5 x 4.2 x 1.75 inches
Console Connectors
Three different types of console connectors are built on
the rear panel for connection to the keyboard, monitor,
and mouse. Each connector is represented by a letter and
color-coded.
K: Keyboard (6-pin mini DIN PS/2, female; in purple)
V: VGA Monitor (HDB15, male; in blue)
M:Mouse (6-pin mini DIN PS/2, female; in green)
K: Keyboard (6-pin mini DIN PS/2, female; in purple)
V: VGA Monitor (HDB15, male; in blue)
M: Mouse (6-pin mini DIN PS/2, female; in green)
KVM Cables
Two sets of cable kits are included, each kit consists of
three cables for keyboard, mouse and monitor.
2
SCAN
Front Panel
SELECT
Select/Scan Button
MiniGen
M V
Two groups of connectors are built on the real panel for
connection to PCs using standard keyboard, monitor and
mouse cables. Each connector is represented by a letter
and color-coded.
1
RESET
PC Port Connectors
V1.0
K
M V
CONSOLE
K
PC1
M V
K
PC2
Rear Panel
V. Installation
Connect Peripheral
Connect keyboard, mouse and monitor directly to the
group of connectors marked as CONSOLE. Follow the
color code to ensure proper connection.
Connect PCs
Use the cable kits bundled with this package to connect
the PC to the KVM Switch. Follow the color code to
ensure proper connection.
32-1310 F (0-550C) , 0%-90% RH
FCC Class B
1
Genie
MINI
KVM SWITCH
2
3
Select Button
Scroll Lock
Scroll Lock
PC#
<ENTER>
The "PC#" represents the PC number 1 or 2. The
built-in buzzer will beep once to confirm the
switching. The ACTIVE LED will switch and
identify which PC is currently under control.
2. To activate Automatic Scan mode:
Scroll Lock
Scroll Lock
<Space Bar>
A long beep sound to confirm the activation.
The SCAN LED will be lit to indicate the
operation of SCAN mode.
3. To deactivate Automatic Scan mode:
Press any key on the keyboard
4
Push the SELECT button and hold for more than
1.5 seconds to activate the Scan mode.
The built-in buzzer will beep twice to confirm the
activation. The SCAN LED will be lit to indicate
the operation of SCAN mode.
3. To deactivate Automatic Scan mode:
Press SELECT button.
The built-in buzzer will beep once to confirm the
deactivation. The SCAN LED will be turned off.
Reset Button
Press the Reset button will automatically reset the
MinGenie2's keyboard and mouse emulation
processors. Do not move the mouse or typing the
keyboard during the reset process. The built-in
buzzer will sound a long beep to confirm the
activation of reset. The reset process will be
complete within three (3) seconds.
5
MiniGenie2 KVM SWITCH
1. To select a PC directly using Hot Keys:
2. To activate Automatic Scan mode:
A N
P
ll the Hot Key functions start with two "Scroll
ock" key and followed with additional keys. A
hort beep sound can be heard when you press
Scroll Lock" key twice.
Push the SELECT button (and release within one
second) to select next PC. The built-in buzzer will
beep once to confirm each PC switching. The
ACTIVE LED will switch and identify which PC
is currently under control.
L
ou can select a specific PC or activate the
utomatic scan mode using the keyboard Hot
eys. The keyboard Hot Keys provide an instant
nd convenient way to control all your PCs.
N A
I O
1. To select a PC using Select Button:
eyboard Hot Keys
O F E S
S
R
L
VI. Operation
MiniGenie
Quick
Installation
Guide
v1.0