Cover strips and retaining plates ADP HP Cover strips Retaining plates Accessories Several German safety regulations, e.g. VBG 4 and VDE 0106 part 100, call for the active parts of electrical equipment to be protected against direct contact. For this purpose, Weidmüller can supply cover strips and associated retaining plates which can be used for the common si]es of terminal. 5etaining plates are Àtted at the ends of a terminal strip but can also be inserted between terminals. They are suitable for mounting on TS 32, TS 35 or TS 15 terminal rails. Spacing of retaining plates: The distance between the retaining plates for the ADP 1, 2 and 3 cover strips should not exceed 300 mm. The cover strip is clipped into lugs at the sides, but can also be Àxed to spigots on the retaining plates which can be provided with a lead seal. The cover strips are transparent so that terminals with accessories and marNings can be identiÀed at any time. Additional markings, e.g. groups, can be attached to the cover strips. Material: unplasticised PVC Supplied in 1 m lengths 7emperature limit: ma[ C transparent Type ADP 1 Material: PA 66 Thickness: 2 mm Order No. 0485200000 ADP 2 0485300000 For mounting on TS 35 / TS 32, with spigot for lead seal Type Order No. 0485560000 HP 1 Spigot for lead seal 0485660000 HP 2 ADP 3 0485400000 ADP 4 (1000 mm) 1430760000 grey Type ADP 4 (300 mm) Order No. 1378160000 TSK 31.5 0347960000 F HP 3 0485760000 HP 4 0485860000 For mounting on TS 15 Type HP 7 Order No. 0258260000 HP 8 0258360000 Covers Overall dimensions A for mounting on terminal rails TS 32 ADP 1, HP 1 61 ADP 2, HP 2 77 ADP 3, HP 3 94 ADP 3, HP 4 73.5 ADP 1, HP 8 TSK 31.5, HP 7 Marking materials Card with warning ´lightning Áashµ, self adhesive 20 pcs. per card 1282250000 – 2012/2013 A TS 35 x 7.5 56 72 89 68.5 A TS 35 x 15 63 79 86 75.5 A TS 15 45 35 Type BEZ.-KARTE ADP B C 49 62.5 92 92 49 31 Qty. 10 6 6 6 6 6 6 Order No. 0566700000 F.15