Cyclohexanol
Cyclohexane
Cyclohexane
Application – For residue analysis
C/8933/15
C/8933/17
1L
2.5 L
GB
GB
25
£ ea(x1)
18.05
£ ea(x4)
16.24
C6H12
Application – HPLC
£ ea(x16)
15.34
32.50
M.W. 84.16
Residue after evaporation .............................................................<2 ppm
Water (Karl Fischer).....................................................................<0.02%
GC Analysis
Pesticide Analysis
No impurity peak that has a retention time greater than Lindane will have a peak
height greater than that produced by 10 pg/mL Heptachlorepoxide (ECD) and 5
pg/mL Parathion (NPD).
Hydrocarbon Analysis
No impurity, whose chain length is greater than Dodecane, is present at a
concentration greater than 0.01 ppm (by FID).
Conditions
Column:
Temp Prog:
J&W DB5: 30m x 0.32mm x 0.1μm df
1; 50°C, 2 mins
2; 40°C/min upto 320°C
3; 320°C for 30 mins
Injection: 5 μL cold on-column
C/8936/15
C/8936/17
C/8936/PB17
GB
GB
PCG
£ ea(x1)
14.85
30.10
31.60
Max. absorbance/Min. transmittance (1 cm cell v HPLC water)
200 nm.........................................................................0.30 A.U./50%T
210 nm .........................................................................0.20 A.U./63%T
220 nm..........................................................................0.10 A.U./80%T
230 nm.........................................................................0.02 A.U./96%T
240 nm .......................................................................0.005 A.U./99%T
250 nm.......................................................................0.005 A.U./99%T
Filtered to 0.2 μm
Not to be used as heating or motor fuel. For further information see 'Tied
Oils' page 632.
25
First aid
Fire
Spillage
Disposal
£ ea(x1)
19.47
SGB
C6H12
M.W. 84.16
Assay........................................................................................≥99.5%
Colour .....................................................................................<5 APHA
Residue after evaporation.............................................................<5 ppm
Water (Karl Fischer)...................................................................<0.005%
Not to be used as heating or motor fuel. For further information see 'Tied
Oils' page 632.
-17°C
11, 38, 50/53,
65, 67
9, 16, 33, 60,
61, 62
Std.
C, P, F, H
A, B, D, G, H
5, 6, 7
UN:
Class:
Pack Grp:
EINECS:
CAS:
For details of this product see the 2006/2007 Acros Organics Reference
Handbook page 562 or visit www.fisher.co.uk for price and availability
Cyclohexanol
21
25
C6H12
SGB
SGB
1145
3
II
203-806-2
110-82-7
Cyclohexane-1,2-dione - 11116
Cyclohexane Extra dry over molecular sieve
100 mL
1L
£ ea(x16)
12.62
25.58
26.86
M.W. 84.16
Safety
36466-1000
36466-0010
£ ea(x4)
13.36
27.09
28.44
Assay ........................................................................................>99.8%
Acidity ...........................................................................<0.0002 meq/g
Residue after evaporation .............................................................<2 ppm
Water.........................................................................................<0.01%
Cyclohexane Extra dry
100 mL
1L
2.5 L
2.5 L
C6H12
Fl. Pt
Risk
Application – Dry solvent
25
This product carries lot data on the pack label, including an
absorbance curve
Not to be used as heating or motor fuel. For further information see 'Tied
Oils' page 632.
32683-1000
C
£ ea(x1)
8.65
31.62
M.W. 84.16
Assay........................................................................................≥99.5%
Colour .....................................................................................<5 APHA
Water (Karl Fischer)...................................................................<0.005%
Not to be used as heating or motor fuel. For further information see 'Tied
Oils' page 632.
C/9000/PB08
C/9000/PB17
500 mL
2.5 L
£ ea(x1)
24.20
94.10
PCG
PCG
C6H11OH
£ ea(x4)
20.57
79.98
M.W. 100.16
Physical constants
Freezing point ...........................................................................23-25°C
Weight per mL at 20°C................................................................0.962 g
Guaranteed analysis
Assay...........................................................................................>98%
Residue after evaporation .............................................................<0.01%
Risk
Safety
First aid
Fire
Spillage
Disposal
20/22, 37/38
24/25
Std.
C, P, F, H
A, C, G, I
7, 19
For full packing code descriptions, see page iv
EINECS:
CAS:
203-630-6
108-93-0
143