ANSYS HFSS TRAINING
COURSES 2013
ANSYS UK Ltd.
97 Jubilee Avenue
Milton Park
Abingdon
OX14 4RW
United Kingdom
Tel:
UK 0800 048 0462
Eire 1800 656 642
Mobiles & elsewhere
+44 1235 420130
Email
training-uk@ansys.com
®
™
Training at ANSYS UK Ltd. helps you to get the most out of the ANSYS HFSS software whatever
your level of experience. We have a programme of introductory courses designed for users of our
products which are held at our office in Abingdon. The registration form overleaf gives dates and
locations of courses, prices and instructions for registering. For information on travel and
accommodation, please visit http://www.ansys.com/en_uk/Contact.


All introductory courses start at 9.15 am and finish at 5.00 pm.
Trainees will be given an electronic copy of the course materials.
In addition to the scheduled introductory courses we offer more advanced and specialised tuition in
the form of Focus Days. Please discuss your requirements with your Account Manager or email us at
training-uk@ansys.com if you are interested in these courses or training held on your premises.
ANSYS HFSS Introduction (1 day):
This introductory course is designed for users who are new to ANSYS HFSS and the finite element
method. After completing this course, trainees will be able to:

Draw and define geometry

Assign materials

Define ports and boundaries appropriately

Set solver controls

Solve basic models

Display and examine results.
ANSYS HFSS Advanced (1 day):
This course is designed for users who are familiar with ANSYS HFSS, and have attended the
standard course. Attendees are requested to bring an example from a current project to work on
during the afternoon session. After completing this course, you should be able to:

Review standard course topics

Apply advanced mesh techniques

Link ANSYS HFSS solutions

Understand solution convergence and controls

Apply healing and model resolution
Focus Days
We offer training on advanced and specialised topics as Focus Days. These are flexible one-to-one
sessions with an expert in your area of interest. They are tailored to meet your specific needs and
can be based on your own example applications
ANSYS, ANSYS Workbench, Ansoft, AUTODYN, CFX, EKM, Engineering Knowledge Manager, FLUENT, HFSS
and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered
trademarks or trademarks of ANSYS, Inc. or its subsidiaries located in the United States or other countries. ICEM
CFD is a trademark used by ANSYS, Inc. under license. CFX is a trademark of Sony Corporation in Japan. All
other brand, product, service and feature names or trademarks are the property of their respective owners.
ANSYS UK Holding Company Limited, Company Registration No: 7107758 VAT No: GB 684907489, is a wholly owned subsidiary of ANSYS Inc.
Company Registration No: 3917515. Registered Office: 47 Castle Street, Reading, Berkshire RG1 7SR VAT No: GB 471 0875 44
© 2013 ANSYS, Inc. All rights reserved.
11/06/2013
Registration Form
Name
Are you a Resident/Citizen of a U.S. Embargoed Country (Cuba,
Iran, North Korea, Sudan, Syria) ¹
Yes
Please complete this form and either fax or email it to the
training administrator.
Fax to +44 (0)1235 432302
No
Company/University
Address
INTRODUCTORY COURSES
Postcode
Please circle which course(s) you require:
ANSYS HFSS
Standard
ANSYS HFSS
Advanced
Jun
25 Jun
26 Jun
Sep
24 Sep
25 Sep
Nov
26 Nov
27 Nov
Telephone
Email and/or Fax
Vegetarian lunch?
Any non-dietary requirements:
ANSYS Account Manager
¹ ANSYS is subject to U.S. trade laws. Please indicate whether
you are a Resident/Citizen of a U.S. Embargoed Country
(Cuba, Iran, North Korea, Sudan, Syria)
Focus Days
All above courses will be held at our Abingdon Office
Topics to be covered and preferred dates:
Confirmation date:
Courses will be confirmed at least 48 hours prior to the
commencement of the course.
Cancellations:
Cancellations after the confirmation date will incur a fixed
cost of £300 + VAT. If you wish to substitute someone,
please notify us as soon as possible.
Other Information
Past experience, typical applications:
Terms & Conditions:
Can be viewed at http://www.ansys.com/ukserviceterms.htm
Fees and Discounts:
I accept the above terms & conditions
(
)
Scheduled courses = £450 exc. VAT / trainee / day **
Signature
Focus days = £975 exc. VAT per trainer per day
(price is independent of number of trainees)
Date
(**) Discounts are available for scheduled courses
- Academic customers receive a 40% discount
- Group discounts:
- For 2 trainees, multiply trainee rate by 1.6
- For 3 trainees, multiply trainee rate by 2.1
Payment Details:
Total (exc. VAT) £.…….………
I wish to pay by credit/debit card
Do not write the number here. Note that
we cannot accept AMEX or Diners Club
or
 Please invoice me/my company
Purchase order number …………………………………
(Purchase order also required)
Person to whom we should send invoice / contact for card details:
Name
Address
Telephone
ANSYS UK Holding Company Limited, Company Registration No: 7107758 VAT No: GB 684907489, is a wholly owned subsidiary of ANSYS Inc.
Company Registration No: 3917515. Registered Office: 47 Castle Street, Reading, Berkshire RG1 7SR VAT No: GB 471 0875 44
© 2013 ANSYS, Inc. All rights reserved.
11/06/2013