Imp Club Spares
Stock List and Prices – from February 2016
Compiled by R.J. Allan
I have been working with Imps for nearly 40 years!
This is the list of spares stock held currently by The Imp Club Ltd. We buy new after market and
“new old stock” spares from time to time at advantageous prices for sale to Club Members. We also
stock re-manufactured parts, to which we apply our own quality control procedure. Please don’t forget
that if the part you require is not listed here, then a member of the Specialist Panel may be able to
locate it for you – see the last section in this Web site. You can contact me and I will suggest a
supplier who may be able to help.
If members have un-wanted parts for Imps or variants, or are able to source any quantity of new spares
which may benefit other members, please contact the Spares Coordinator or Spares Facilitator. Some
parts are now in short supply and your help is much appreciated.
For a printable (PDF) version of this list click here: stock.pdf. We recommend you view the on-line
version to save paper.
If you want a ready printed summary of this catalogue (24 pages) please send an SAE and £2.00 in
stamps to me at the address on page 1 below.
c The Imp Club, 2005-16. The Imp Club Spares Scheme is a service offered by Imp Club
Members to other Members. The Imp Club Ltd. does not accept any liability for the suitability
of spares provided or for the use to which they are put after sale or information supplied. However
all information and advice is given in good faith and passed on from original dealers’ information or
experience of Club members. Parts are bought as described and should be returned immediately if
the customer is not satisfied (there may be a small handling charge to cover postal charges).
i
CONTENTS
ii
Contents
1 Imp Club Spares
Stock List and Prices – from February 2016
1.1
Comments from Club Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2
2 Abbreviations used in Imp Club Spares List
3
3 Conditions Applied
4
4 Postal Rates from April 2015
5
5 Certificates, Technical Books and Tools
6
6 Engine and Auxiliaries including Cooling
9
7 Carburettor and Exhaust
15
8 Transaxle and Gearchange
20
9 Suspension and Steering
24
10 Brakes and Controls
28
11 Electrical Components
30
12 Dashboard and Controls
34
13 Body and Fittings
35
14 Special Accessories
42
15 The Specialist Panel
44
1
IMP CLUB SPARES
1
STOCK LIST AND PRICES – FROM FEBRUARY 2016
1
Imp Club Spares
Stock List and Prices – from February 2016
This is the list of spares held currently by The Imp Club Limited. We try to buy spares from time to
time at advantageous prices for sale to Club Members. Please don’t forget that if the part you require
is not listed here, then a member of the Specialist Panel may be able to locate it for you. If we can’t
locate a new part we may offer second hand items available from another Club member.
Spares in this list are advertised at a cost which has been discounted to members for their own use.
Since the Club is run on a voluntary basis for the mutual benefit of all members we have to ask that
buyers declare their membership number. Cost of membership is, at the time of writing, £24.00 per
annum for the UK (plus £3.00 once off joining fee). Please check Web site for latest amounts. For
overseas prices please contact the membership secretaries.
When confirmation of order is received, this is to indicate that we have received your order. It does
not indicate that a contract exists between us. We will indicate acceptance of your order, and hence
a contract between us, when we send you an invoice. We have included this term to protect us in the
case that a mistake has been made in pricing, we have inadvertently under-priced goods, or we are no
longer able to supply a particular product for some reason. In the case of a change of price, we will
try to contact you first to ensure that the price is acceptable.
We are un-able to sell to non-members or to dealers for re-sale for insurance reasons. We are now VAT
registered (number GB 141 9391 11) and VAT may have been paid at source on all items marked “*”.
We can provide a VAT receipt if required.
If members are able to source any quantity of new spares which may benefit other members please
contact the Spares Coordinator or Spares Facilitator as below. Information given in this list includes
part number, description, availability and price at date of publication subject to P&P. To order, please
contact us or send a cheque payable to “The Imp Club”. We are also able to accept most credit cards,
but subject to an additional handling charge of £1.00 or 5% whichever is the greater.
Spares Coordinator
Bob Allan
Shadewood Farm
283 Chester Road
Grappenhall
Warrington
Cheshire WA4 2QE, UK
Tel: +44 (0)1925 267084 (6pm-8pm and all day
weekends)
e-Mail: spares_at_theimpclub.co.uk
Spares Facilitator
Keith Robbins
21 Elmwood Close
Retford
Notts. DN22 6SL, UK
+44 (0)1777 703146
e-Mail keithandmaryr_at_talktalk.net
Note: Follow our Twitter feed here @ImpClub Spares.
If we haven’t got what you want – please ask, as stock is changing all the time. If we really
haven’t got it, we will find someone from the Spares Panel who may be able to help.
Please note that we are now stocking re-manufactured components from Malcolm An-
1
IMP CLUB SPARES
STOCK LIST AND PRICES – FROM FEBRUARY 2016
2
derson, Ben Boult and ourselves, which are included in this list. We also have new suppliers
of brake components, radiators, gaskets and body seals. Prices have been updated accordingly.
If you know of any new, un-used (new), Imp or Climax spares please contact the Imp
Club via Bob Allan +44 (0)1925 267084 or any other Club official. Please note that some
Imp based vehicles use Triumph Spitfire front suspension and steering components. We
are also willing to stock these and will recommend suppliers.
If you are a supplier, have experience in sourcing equivalent components, re-conditioning
or re-manufacturing, and are willing to help, we would be glad to hear from you.
The Rootes Archive Centre has a very extensive collection of original drawings and
related information about the manufacture of Rootes cars, including Imps. To see the list
of Imp drawings and original part numbers, go to the Web site http://www.rootesarchivecentre.
org.uk and follow the link to The Index or Drawings.
1.1
Comments from Club Members
Roy Bluny, Newport, 18/1/2016: The package arrived this morning - SUPERB SERVICE!
Simon Benoy, Stevenage, 9/11/2015: I knew you were a star, this just reinforces that belief ! Top job...
Gavin Miller, Ravenscar, 8/9/2015: Arrived yesterday... Super quick!
Graham Mills, London, 8/6/2015: Parts received this morning - first class parts and service, thank
you very much.
Pete Crank, Telford, 30/3/2015: Thanks for an excellent service... I shall use The Imp Club a lot
more for spares – I honestly didn’t realise what and how much you do!
Melvyn Friend, London, 26/1/2015: Brilliant service = top team!
Mark Winspear, Whitby, 25/1/2015: Just to let you know the parts arrived this morning. Exactly
what I needed.
Lee Moore, Australia, 20/10/2014: It’s great that you have such a comprehensive spares availability
with such easy options.
John Gillmeister, Australia, 14/9/2014: I am so pleased with the service and your personal attention
to detail ... by the way ... I lived in the UK-Europe for some 14 years, and loved it...
Jon Hiscock, 27/8/2014; Many thanks for your prompt service, it has been much appreciated. All I
have to do now is to wait for some good weather!
Ian Webb, 27/8/2014; Got the spares OK, excellent service as always, thanks.
Rosemary Harkis, Portugal, 6/8/2014; This is to say how glad, and relieved, I was that you were able
to help me... The Imp Club has, quite honestly, saved my life...
2
ABBREVIATIONS USED IN IMP CLUB SPARES LIST
3
Imp Club National 2014, special award for “Outstanding Contribution to The Imp Club”.
Robert Young, 6/4/2014, South Africa; My consignment was delivered to Roy’s home yesterday. Clearing the shipment through customs was un-eventful and duties levied were minimal. Clearly all paperwork was in order and I thank you for your contribution regarding the initiating documentation.
Subsequently Roy has checked the shipment and confirmed that everything I ordered was correctly
supplied and suffered no damage in its long transit...
I am most appreciative of the time and effort that you devoted to satisfying my large and varied order.
Your purchase of the Tex door mirrors on our behalf, and arranging the purchase – and related local
logistics – of the replacement dashboard and door cappings from the Chairman, involved you in more
than the usual amount of “hassle”, for which I - and Roy - are really most grateful.
The upshot of your contribution, plus of course Roy’s specialist know-how and quality workmanship,
is that another Imp which might well have passed into rusty oblivion is being returned to service
in a condition which may be stated without exaggeration to be better than new. For example, every
screw fastening and numerous small steel fittings and brackets have been glass bead-blasted and electrogalvanised prior to (in some cases) epoxy painting. That’s superior to the factory original. All threaded
fasteners are assembled with Coppaslip anti-seize coating - again better than original. When complete
in the next few months I’m sure that it will be one of the most carefully assembled and neatest Imps
around.
The Club has been a great source of Imp specific know-how for me and together with the Club Forums,
Impressions and your excellent Linwood book, has been inspirational and helpful. We will keep you
posted of our Imp progress here at the southern tip of Africa. Thanks again for your excellent service
and support.
Before that: I just assumed that everyone was happy.
2
Abbreviations used in Imp Club Spares List
PnP
cw
bkt
OS or RH
NS or LH
acc
assy
bkt
brg
comp
compt
con
diff
dizzy
gskt
postage and packing cost (see code below)
complete with
bracket
offside or right hand side of car
nearside or left hand side of car
accelerator
assembly
bracket
bearing
higher grade part (no guarantee of winning!)
compartment
connecting
differential assembly
distributor
gasket
3
CONDITIONS APPLIED
h-lamp
hsg
incl
recon
sport
std
w-pump
w-screen
3
4
headlamp
housing
includes
reconditioned
twin carburettor engine as fitted to Sport and Stiletto
“standard” engine, i.e. MkI, MkII or MkIII but not Sport
water pump
windscreen
Conditions Applied
Imp Club Spares (part of The Imp Club Ltd.) provides replacement parts for Hillman Imps and related
classic cars as listed in these pages. This service is provided for bone fide members of The Imp Club to
whom these conditions apply. The service is by post or personal collection, we do not deliver. The list
describes the goods available and follows the terminology used in Rootes parts publications. The items
provided are new, re-conditioned, re-manufactured or new old stock (NOS) to original specification
as far as we can ascertain (there is a separate quality control process). There are occasional “special
offers” and “accessories”. Second hand items may be offered if this is the only solution available.
The prices shown in this list are accurate at the time of publication and valid for one month thereafter.
Items marked with “*” may however vary in price at any time as we depend on our suppliers and
their prices can change. We will quote an exact price to people making enquiries personally by letter,
e-mail or by ’phone.
We are obliged to add 5% or £1.00 (whichever is the greater) for handling of orders on credit cards
or PayPal. Debit cards subject to £1.00 charge. We are also VAT registered.
Delivery costs are simply the price of normal Royal Mail postage, usually first class or Parcel Force if
this is advantageous plus a small packing cost if required (we aim to re-cycle packaging if we can), see
below. We may choose to add compensation cover to high value orders (over £20) to protect against
loss.
Any member of The Imp Club is entitled to use this service and to cancel or change their order prior
to its dispatch. Once dispatched or delivered, provided the parts have not been fitted or otherwise
“used”, we will refund any un-required parts returned at any time at the purchase price (if within one
month) or at a price to be agreed at a later date. Postage and any other “one off” charges however
cannot be re-funded.
New, re-conditioned or re-manufactured parts carry a like for like replacement warranty for 6 months
from the date of purchase. Any problems or complaints must be notified to The Imp Club at its official
business address within one month of ordering.
4
4
POSTAL RATES FROM APRIL 2015
5
Postal Rates from April 2015
Please check current Royal Mail rates as the list below may be out of date and we will charge the
current rate.
There is at present no handling charge, except 5% extra on credit card or PayPal payments. UK
postage is charged at the following standard rates for 1st class Royal Mail post or equivalent. For
instance for a set of front brake shoes at £18.00+SPB you should send £23.45 which includes the
Royal Mail cost for a parcel up to 2kg. Normal 1st class post is used for smaller items unless you
specifically ask for faster delivery. Please include at least a first class stamp with your order or add
on the price calculated as below.
A courier service may be used for body panels and other large or heavy items which cannot easily
be packaged. This is however expensive, prices typically starting at around £18.00 in UK. We would
normally try to distribute large packages via the area centre network or at an AGM, committee meeting
or National Weekend. For overseas postage we try to send separate parcels with a maximum weight
of 2kg if this is cheaper.
Royal Mail Letters (standard and L=large, UK only), e.g. if your order will fit in a thin Jiffy bag.
LA
LLA
LLC
100g
100g
500g
63p
95p
1.68
LLB
LLD
250g
750g
1.26
2.42
Standard Parcels (UK only) are now in two categories: (S=small) up to 45cm x35cm x8cm (or 16cm
x16cm x16cm) and 8kg; (M=medium) up to 61cm x46cm x46cm and 20kg. Parcel Force Worldwide
services are available up to 1.5m x3m x3m and 30kg, e.g. Parcel Force 48h Express.
A special deal applies to small parcels up to 2kg – second class postage is only £2.80. We will try to
use this where possible.
SPA
MPA
MPC
MPE
48hA
48hC
48hE
48hG
1kg
1kg
5kg
20kg
2kg
10kg
20kg
30kg
3.30
5.65
15.85
33.40
11.99
16.40
28.51
43.78
SPB
MPB
MPD
2kg
2kg
10kg
5.45
8.90
21.90
48hB
48hD
48hF
5kg
15kg
25kg
12.98
23.14
39.64
We will usually send items over 2kg by Parcel Force 48h which includes compensation for £100. Items
over 2kg or parcels to overseas destinations will go by Parcel Force except by special arrangement. We
may choose to use additional compensation options with these services if your goods are valuable.
5
CERTIFICATES, TECHNICAL BOOKS AND TOOLS
5
6
Certificates, Technical Books and Tools
From time to time technical books and tools become available when we buy in spares. We have listed
the current stock with a guide to condition: New, A, B, C where A, B and C indicate a second hand
item in condition ranging from “nearly as new” to “damaged but complete”. If you wish to acquire or
pass on a particular technical book or tool please contact us. All new books are available via Regalia.
Heritage Certificates
It was announced by the Government in the Spring 2014 budget that from April there was to be a
rolling exemption on VED, that means historic vehicles over a certain age will be tax free. You still
need to get a tax disc, but it won’t cost anything if you can prove that your Imp was build before
January 1974. Next year it will be Jan’1975 and so on.
The Federation for British Historic Vehicle Clubs (FBHVC) issued a press release on this which was
re-produced in the May issue of Impressions. You will need evidence of the date of manufacture of
your Imp if there is any possible doubt about it.
Working with the Rootes Archive Centre Trust, the Imp Club is able to issue Heritage Certificates for
your Imp or any other Rootes vehicle. We are registered with DVLA V765 Scheme. We will provide
an individual Certificate and Car Details Sheet. These includes precise dating information plus a
variety of other infomation authenticating the vehicle as it left the production line. It is based on a
combination of factory information and other sources. A valuable addition for a cherished vehicle and
essential if you are trying to confirm its true identity. We can even print an extra information sheet
with history and photographs provided by you.
You can see a sample and download an order form from the Rootes Archive Centre Web site: http:
//www.rootesarchivecentre.org.uk. Just click on the link to “Certificates”.
Prices: Heritage Certificate including Car Details Sheet: £35.00 including PnP; Extra sheet: £1.20
= total £36.20; Overseas: please add extra £4.00.
Books
Price depends on condition as shown in the table below. Please ask for availablity as stock changes
rapidly (parentheses indicate figures at time of writing). Note: WSM141 is the later Imp Workshop
Manual. New parts lists are currently not available. We will try to provide the book most appropriate
for your car.
Author
Title (edition)
Rootes
Rootes
Rootes
WSM016 1963
WSM284 (blue softback)
WSM141 14th edn (blue
binder)
WSM141 (red ring binder)
Parts List
Chrysler
Rootes
ring
New
N/A
N/A
N/A
N/A
25.00 ()
Price for condition:
A
B
15.00 ()
12.00
15.00
12.00 (6)
18.00
14.00 (3)
C
8.00
8.00 (9)
10.00 (3)
20.00 (1)
25.00 ()
12.00 (2)
15.00 ()
16.00 (2)
20.00 (3)
5
CERTIFICATES, TECHNICAL BOOKS AND TOOLS
Autobook One
Autobooks
Autobooks
Autobooks
Autopress
Autopress
Haynes
Haynes
Haynes
Haynes
Haynes
Autodata
Pearsons
Pearsons
Pearsons
Olyslager
Thorpe
Page
Griffiths
Henshaw
Haynes and Legg
Chrysler
Rootes
Rootes
Rootes
Chrysler
Chrysler
W/s manual (1968)
W/s manual (1974)
W/s manual 1969-73
W/s manual (1982)
W/s manual 1963-68
W/s manual 1969-72
W/s manual (1971)
W/s manual (1973)
W/s manual (1976)
W/s manual (1980)
Owner’s Handbook
W/s manual (1979)
W/s manual (1965)
W/s manual (1967)
W/s manual (1968)
Rootes Imp
Hillman Imp
Hillman Imp
Tuning Imps (1971)
Apex the Inside Story
Weber Carburettors
Dealership List
Imp MkI Handbook
Imp MkII Handbook
Chamois Handbook
Californian Handbook
Husky and Imp Van Handbook
7
8.00
8.00 (1)
8.00
8.00
8.00
8.00
10.00
10.00
10.00(1)
10.00(2)
8.00
8.00 (1)
6.00
6.00
6.00
8.00
8.00
8.00
10.00
N/A
N/A
N/A
N/A
N/A
N/A
6.00
6.00 (8)
6.00 (2)
6.00
6.00
6.00
6.00 (3)
6.00 (1)
6.00 (3)
6.00 (3)
6.00 (2)
6.00 (4)
5.00 (4)
5.00 (6)
5.00 (2)
6.00
6.00
6.00
8.00 (1)
45.00 (1)
25.00 (1)
6.00
6.00 (1)
6.00 (4)
6.00 (1)
6.00 (2)
6.00 (1)
5.00
5.00
5.00 (3)
5.00
5.00 (2)
5.00
5.00 (4)
5.00 (1)
5.00 (2)
5.00 (1)
3.00
3.00
3.00 (2)
3.00
3.00 (1)
3.00
3.00
3.00
3.00
3.00
5.00 (3)
4.00 (2)
4.00
4.00
5.00 (1)
5.00 (2)
5.00 (1)
7.00
3.00
2.00
2.00
2.00
4.00 (1)
4.00
4.00
5.00
5.00
5.00
5.00 (1)
5.00
5.00 (2)
5.00
4.00
4.00
4.00
4.00
4.00
4.00
Tools
Some tools are available from time to time with condition and price as indicated below by number in
parentheses. Original Imp workshop tools are extremely rare and understandably fetch a high price.
Unfortunately RG355 is currently not available, so don’t ask! There was a description of how to make
RG355 by Alan Turner in Impressions Apr’1993, so you might be able to get a back issue and try it
yourself.
Manufacture
Description
9221600
7103171
7103652
72270728
RG188/3
Sparking plug spanner
Jack with handle
Handle only
Tool bag
rear hub securing plate from
RG188C, D or E
track rod taper knuckle remover
timing chain support
RG284
RG353
Price for condition (UK pounds):
New
A
B
H*
15.00 (3)
15.00
10.00
25.00
40.00
15.00
15.00
10.00
15.00 (15)
5
CERTIFICATES, TECHNICAL BOOKS AND TOOLS
RG354
RG355
RG357
RG358
RG359
RG359 ?
RG363
56
RG365
RG366A
RG367
RG368
RG369
RG370
RG372
RG373
RG374
RG377
RG379
RG383
RG384
RG385
RG386
RG408
RG4221B-8
RG534
RG535
RG536
550
RG613A
RG6513A-3
1414
1602
RG4221B-8
D.143T
timing chain tensioner retainer
cylinder head bolt wrench
valve guide remover-replacer
valve guide reamer 9/32”
rear engine mtg bush removerreplacer
diff brg replacer (use with RG363
and RG4221B-8)
diff brg (small) replacer adapter
(use with RG359)
diff brg remover
g- box assy jig complete
diff oil seal and input shaft ball brg
replacer
reverse gear and pinion nut wrench
needle brg sleeve remover-replacer
needle brg remover-replacer
pinion brg cup replacer adaptors
clutch shaft oil seal replacer
diff adjusting nut wrench
clutch plate centraliser
universal joint 1/2” AF
rear hub brg assy tool
diff oil seal remover
clutch shaft oil seal remover
kingpin bush remover-replacer
suspension arm bush removerreplacer
front suspension gap gauges
diff large brg replacer adapter
bezel nut wrench
rubber mldg glazing tool
crankshaft spigot bush replacer
driver handle
valve spring compressor
valve spring compressor
synchro hub retainer clips (pair)
Baty dial gauge set
code 29 adaptor for diff brg replacement (large)
tappet remover
donut clamp (stainless)
14mm plug thread tap
8
50.00
70.00
65.00
15.00 (1)
60.00 (1)
10.00
350.00
250.00
15.00
40.00
20.00
15.00
10.00
35.00
15.00
10.00
10.00
10.00
10.00
30.00
30.00
15.00
15.00
10.00
50.00
10.00
10.00
10.00
10.00
15.00
8.00
10.00
75.00
30.00
100.00
40.00
10.00
5.00 (1)
* Items H are Home Made (probably by former Club members) or after market.
6
ENGINE AND AUXILIARIES INCLUDING COOLING
9
Workshop Supplies
We are working with a Club member, Peter Lewis, who runs Chemsol UK. He is able to provide a
range of environmentally friendly chemicals for work on classic cars. We have so far identified the
following which might be useful. Please let us know what you think and what quantities might be of
interest. Also let us know if there is anything else required.
Rust Converter – turns light rust black and ready to paint. £11.50+VAT per 1 litre.
CI Rust Preventer (water based) – protects bare metal for some time, e.g. after blasting or sanding –
£12.00+VAT per 5 litre ready to use. It is also available in concentrated form which can be diluted
with water at a rate of 5:1 or more, £11.00+VAT per 1 litre.
CS52 Penetrating Rust Preventer and de-water – to be used as a releasing agent or oil film or sprayed
on electrical components to maybe make them work – £15.00+VAT per 5 litre or £4.00+VAT per 1
litre.
De-Greaser (water based) – make your engine and transaxle spotless; substitute for elbow grease?
Price TBC.
Trigger spray bottle – £2.00+VAT
6
Engine and Auxiliaries including Cooling
Note: We have a range of re-conditioned radiators in stock and also new supplies of re-con water
pumps. Rads and pumps are available on an exchange basis via the ACO network (for members only)
– there is a surcharge for non-return and may be additional postal cost. Unfortunately the quality
of some of the old ones returned means that there has been a price increase. Please return good old
ones!
All gaskets and hoses are available newly made. Newly made piston rings are now available in certain
sizes.
We have been informed that there is going to be a large increase in the cost of valves soon if they have
to be re-manufactured.
Silicone radiator hoses are available at around £90 a set of three – we can put you in touch with the
supplier. Tell us what else you need...
Note: Re-conditioned items carry a replacement warranty for six months from time of sale. If you
are not happy with what you have received, please contact us immediately.
900ccHead
900ccBlock
7010031
Head and Block
Ian Carter bv head, as new, solid carrier and race cam
photos avail - easily modified for 998
900cc race bottom end - Ian Carter, fully balanced
cylinder head 875cc MkI with guides and seats
1
2200.00
2
1
800.00
85.00
6
ENGINE AND AUXILIARIES INCLUDING COOLING
7010128
7054265
71717553
20252400
7050151
7054090
7054090/1
7054204
7100045
7100046
7100047
7100049
7100050
7100051
7101086
7100308
7100466
7100465
7100854
7100448
9207019
7100318
20312
MM2
7054059
7100058
7100066
7100069
7100071
06B1
06B1+
7100173
7100235
7100325
7100423
7100411
79040180
9810092
cylinder head 875cc MkI with guides and seats
cylinder head L4 bare with guides and seats
cylinder head L6 bare with guides and seats
cylinder head 930cc bare with guides and seats
maybe suit turbo setup?
Valve Gear
spring valve dual sport (set 8)
guide valve (single)
guide valve (single, slight rust)
guide, bronze
seat insert inlet MkII
valve inlet MkI
valve exhaust MkI
cup valve spring exhaust or sport
spring valve std (set 8)
collar spring rtg std
cotter valve stem (set for 4 valves)
collar spring rtg std or sport
cup valve spring inlet std
valve exhaust MkII, Sport or Comp sizes (each)
valve inlet MkII
valve exhaust MkII and Sport (each)
valve inlet Sport
circlip valve guide
seal kit inlet valve stem std (set4)
cam follower std.
clip on Mini type valve stem seal (set4)
Cam and Timing Chain
camshaft (R17, R20, R22, R23, GE3, GB72, 380, 410, 420)
cam bearings std (set6)
lock tab cam sprocket
pin spring chain tensioner
shoe chain tensioner
lock tab tensioner pivot
9226013 timing chain std
9226013 timing chain competition
washer thick camshaft sprocket
stud dowel 1/4 x1-1/2” special cam brg cap
dowel 1/4” x1/2” carrier or manifold locating
camshaft 7010157 L6 and sport
camshaft 7010141 std
bolt 3/8” x3/4” cam sprocket
spirol pin
10
1
2
1
1
85.00
190.00
190.00
100.00
2
2
3
4
23
37
46
28
9
18
12
28
24
to order
68
4
4
100
3
1
8
to order
3
34
4
1
15
1
to order
61
44
23
1
2
128
10
20.00
4.50
3.50
10.00
2.00
4.00
4.00
1.00
12.00
3.00
6.00
3.00
1.00
19.20 *
7.00
10.00
12.00
15p
1.00
5.00
2.00
265.00 *
36.00 *
1.50 *
30p
1.00
30p
14.00
18.00 *
30p
1.50
20p
80.00
30.00
50p
6
ENGINE AND AUXILIARIES INCLUDING COOLING
7054041
7054140
7100107
PEP18111
PEP18111
GPC9218
GPC9218
18521KR
20460KR
20460KR
20460KR
SM5
MM1
R938
11
Pistons, Rings etc.
gudgeon pin std (set 4, slight rust)
gudgeon pin Sport (set 4, slight rust)
piston w. rings Mk I (no eyebrow)
piston std (single, MkII) w- rings
Hepolite pistons st+.030” w- rings and pin
Hepolite pistons std+.040” (set4) w- rings and pins
pistons std van bare
pistons w- pin 930cc (set4) no rings
piston w- rings and pin 930cc
Hepolite 72.5mm (998cc) pistons (set4) w- rings and 5/8” pins
Hepolite 72.5mm (998cc) pistons (set4) w- rings and 11/16” pins
Hepolite 72.5mm (998cc) piston w- rings and 11/16” pins
Hepolite 74mm (1040cc) pistons (set4) w- rings and 11/16” pins
SM5 forged pistons (72.57, 74, 74.07, 74.3, 74.5, 75, 75.15mm)
pistons, 72.5, 73 or 74mm c/w rings (set4)
Gandini piston rings (set of 4x3) 875 std
Gandini piston rings (set of 4x3) 928 std
Gandini piston rings (set of 4x3) 998 std
Cords piston rings (set of 4x3) std+.060”
assorted 875cc rings various sizes (state req.)
oil control rings 930cc
7054045
7054045
7054045
7054046+
7054048+
7054050
7054050
7054020+
7054020+
7054056
7100017
tab-set
7100105
7100184
7100328
7100441
7100869
Crankshaft and Bearings
b/e brg shell set Glacier-Dana std
b/e brg shell set std
slight shop soiling
b/e brg shell set Glacier +.010”
b/e brg shell set +.020”
b/e brg shell set +.040”
main brg shell set Glacier-Dana std
main brg shell set std
slight shop soiling
main brg shell set ACL +.010”
main brg shell set +.040”
thrust brg (pair) std
H96/10R starter ring gear
engine full lock tab set
b/e brg cap lock tab (set of 8)
main brg lock tab (set of 3)
thick washer for crank pulley
lock tab crank pulley
Woodruff key crank pulley
flywheel c/w starter ring gear
flywheel lock tab (pair)
2
2
1
1
3
2
3
1
2
1
1
3
2
ask
to order
2
1
1
1
42
58
5
4
50.00
45.00
1
2
7
6
2
50.00
45.00
45.00
50.00
45.00
7
3
2
4
9
2
4
6
54
12
3
8
50.00
45.00
10.00
35.00
16.00
3.00 *
2.70 *
30p
1.00
90p *
40.00
1.20
16.00
16.00
30.00
50.00
50.00
200.00
20.00
120.00
45.00
320.00
320.00
80.00
400.00
*
265.00 *
57.50 *
57.50 *
57.50 *
50.00
4.00
4.00
6
ENGINE AND AUXILIARIES INCLUDING COOLING
77054264
?
9003143
7050132
7095003
7095018
7100164
7100177
7100183
7100444
7100458
7100578-9
7100578
9803179
7100593?
29900421
29604203
29605124
29605343
71804556
PFP8157
HB10+
7100353
MM8
12
Imp crankshaft
washer thick fire pump only
B33 bolt crank pulley
Miscellaneous
GFE110 oil filter paper element
oil pump spindle and vane
worm gear crankshaft
dipstick tube
dipstick
breather element MkI
drive gear dizzy and oil pump
O-ring for filler cap
oil filter unit std complete
base oil filter unit std
pressure relief valve, late type
union JIC-8 oil drain to head
oil cooler hoses and unions 1/2 BSP (pair)
ask for other fittings or lengths
oil cooler hose and unions short only 1/2 BSP
blanking plug oil way or manifold 1/8 BSPT
oil drain pipe head to block flexy
stud 1/4 x1-1/8”
stud 1/4 x1-1/4” cam cover
stud 1/4 x1-1/2” cam cover
stud 1/4 x2-1/8”
stud 1/4 x2-1/2” oil pump to block
stud 1/4 x2-3/4” oil pump to block
stud 1/4 x3”
stud 5/16 x1-1/2” manifold
stud 5/16 x1-1/2” UNF-UNF
stud 5/16 x1-5/8” manifold longer
stud 5/16 x2-1/4” timing cover
stud 5/16 x2-3/4” timing cover
stud 5/16 x4-1/4” long manifold clamp
or sport oil filter block
manifold clamp block
oil filter spin on MkIII std
oil filter spin on MkIII large size
crush washer alloy 5/8” x15/16”
crush washer alloy 3/4” x1-1/16”
head bolt set (5 long, 5 short) Allen key head
washer special
h-bolt short only
oil pump and pickup filter
oil pump high capacity
3
33
1
222
1
3
6
2
4
3
8
1
1
1
19
3
120.00
30p
2.50
16
10
11
13
5.00
35.00
12.00
1.50
6.00
50p
15.00
50p
35.00
25.00
5.00
4.50
30.00 *
POA
10.00
60p *
20.00 *
50p
50p
50p
1.20
1.20
1.20
1.20
1.00 *
1.00
70p *
1.40
1.40
1.60
2
16
2
31
13
6
30
10
2
ask
2.00
6.00
7.00
50p
50p
15.00 *
60p
1.50
90.00
144.00 *
15
18
3
39
9
4
52
93
8
8
6
ENGINE AND AUXILIARIES INCLUDING COOLING
MM4
alloy deep pulley, various available
oil cooler 12 row 3/8 BSP
13
to order
1
ask *
30.00
Note: most gaskets have now been re-manufactured and are similar to or better quality than the
original.
SM1
RP1
7050109
VEF021
7095000
7100061
7100062
7100081
30013
7100158
7100313
7100336
7100357
7100367
Reinz+
7100416
7101259
7101336
GPF8880
9077102
9107005
9107026
9107026+
9107066/91
9102085
GPC9091
7100351
Gaskets and Seals
race Kevlar head gaskets (70mm to 74mm ask)
998cc or 1040cc head gasket, steel faced
gasket set full top end VDD080/1 875-930cc
gasket set full bottom end VEF021 w- hockey sticks
gskt timing cover (pair)
gskt cam cover cork or card
joint oil filler to cam cover
joint oil pump to block
gskt water pump
gskt hose to block inlet
gskt manifold metal or card
gskt manifold competition type
joint oil filter fitting to block
seal dipstick
head gasket std type incl O-ring
head gasket Reinz type 930cc incl O-ring
gskt thermostat hsg
seal crank rear “hockey stick” (pair)
gasket sump
gskt thermostat hsg 930
also fits Imp!
Dowty seal 1/2 BSP bottom of oil drain
or relief valve or sump plug
Dowty seal 3/4” top of oil drain
O-ring head gasket
O-ring timing cover
O-ring timing cover Viton
O-ring dizzy
O-ring breather MkI
oil seal crank pulley end
oil seal rear for 930cc B1 engine
oil pickup and gauze 930cc
O-ring 3” for filter canister
O-ring 1/2” for filter canister
Cooling System
fan belt (1100, 1125, 1138, 1175mm)
toothed belt competition 150L50 NOS
ask
to order
20
8
100
26
24
84
47
51
57
4
18
20
3
1
20
12
20
170
186.00 *
54.00 *
18.00 *
22.00 *
2.00
4.00 *
55p
1.00 *
1.50 *
35p
4.00
7.00
1.00 *
50p
10.00 *
20.00
50p
8.00 *
5.00 *
30p
32
1.00 *
35
74
21
37
19
13
27
9
1
30
10
1.00 *
15p *
30p
90p
30p
30p
3.50
8.00 *
6.00
50p
30p
27
3
5.00
offer?
6
ENGINE AND AUXILIARIES INCLUDING COOLING
7101217
79214001
7100445
7100643
7100829
7103229
7103230
7104552
DEV952
HH2
Join1
Jubilee
JubSSet
1217377
7102492
7102990
WR1
CTS1123
WR1MkI+
WR1van+
7102264
WP1reman
WP1new
WP1
WP1newMk1
WP1new930
WP1new930+
WPRK1
6202-2RS
14
thermostat (74, 82, 88 or 90 degree)
drain tap block or 3 way
944 hose pump to block
union 3/8 BSPT hose tail to head
plug banking 3/8 BSPT water union
Woodruff key water pump pulley
942 hose radiator top
943 hose radiator bottom
hose pump to 3 way union 90 elbow EPDM
hose 90 elbow for heater valve silicone
10m x 5/8” heater hose (sufficient for both sides)
5/8” hose available to order per foot
hose joiner, 5/8” x2” aluminium
Jubilee clip BZP 22, 25, 30, 35, 40, 45, 50 and 55mm
also in stainless, approx 2x price, please ask
stainless Jubilee clips engine set
drain tap radiator plastic
O-ring seal for above
radiator cap std 7lb short
radiator cap early 4lb short
radiator-reservoir cap blank
recon 2 or 3 row radiator std MkII, MkIII
recon special high efficiency rad exchange
MkI radiator recon HE exchange
Van radiator recon HE exchange
exchange surcharge £15.00 refunded on return
gaiter fan shroud rubber, new re-made
screw stainless for rad cowling
water pump new re-manufactured
water pump new old stock (NOS)
water pump recon exchange
exchange surcharge £10.00 refunded on return
water pump new MkI NOS
water pump new 930 (outer only)
water pump new 930 complete
repair kit w-pump (brgs, seals and gasket)
bearing w-pump
bolt set w-pump (4x bolts, nuts washers)
bolt set pump bkts (4x bolts, nuts washers)
22
5
20
5
2
4
36
19
3
3
to order
6
9
75
6.00 *
4.00
9.00 *
5.00 *
2.00
70p *
12.00 *
9.00 *
5.00 *
5.00 *
40.00 *
1.20 *
3.50
2.00 *
to order
40
10
22
2
1
3
on order
to order
to order
40.00 *
1.50
30p
6.00 *
4.00
4.00
110.00
135.00 *
135.00 *
135.00 *
9
ask
to order
5
5
16.00 *
*
135.00 *
95.00
80.00 *
2
3
2
5
6
4
1
70.00
30.00
50.00
20.00 *
5.00 *
4.50 *
4.50 *
For grommets, see under Body.
7010164
7080399
Aluminium Castings and Related Misc.
cam cover
hose short flame trap to pipe
clip for above
1
3
6
15.00
1.00
50p
7
CARBURETTOR AND EXHAUST
EMB1
EMB1+
PFP8580
71010105
79801043
79801043
9077102
FORD1
9803112
9803115
9804420
9806422
5220713
engine mounting bush, re-man
engine bush in housing, re-man
timing cover
housing thermostat
clip breather hose flame trap
plug sump 1/2 BSP
plug sump 1/2 BSP drilled
sump plug brass
plug 1/2 BSP tapped with oil pipe
Dowty seals 1/2 BSP for sump plug
oil filler cap plastic “Ford”
bkt set (pair) for oil cooler
blanking plug 1/4 BSP block rr early or fr late
blanking plug 1/4 BSP block rr late
blanking plug 1/4 BSP block fr early
plug blanking timing cover 1/4 BSPT
crush washer copper 1/4 BSP
IRC7100441
9226013
7
Good second hand Items
Van radiator, very little use
sprocket cam multi-hole
pulley alloy for w-pump
Sport ex. valve
Sport inl. valve
Mocal oil thermostat
sump, large capacity
flywheel c/w srg, lightened various s/h
flywheel 930 modified s/h
timing chain std slight use
15
3
to order
2
4
1
3
6
1
2
see above
2
2
3
3
3
to order
11
1
1
1
4
4
1
1
4
1
4
35.00 *
42.00 *
40.00
24.00 *
3.00
3.00
3.00
3.00
5.00
1.00 *
3.00
25.00 *
2.00
2.00
2.00
50p
70.00
10.00
30.00
6.00
6.00
15.00
45.00
45.00
45.00
7.00
Carburettor and Exhaust
Note: Many members have reported problems with un-leaded fuel. We have O-rings, tubes and hoses
in improved materials to counteract this.
The problem with un-leaded fuel is that ethanol is being added to make it so called “environmentally
friendly”. This can corrode many metals, destroy your fuel tank lining and de-grade rubber based
elastomers and some plastics on all old cars. The FBHVC are researching into this and we will do out
best to supply components using the best materials avaialable as recommended by them.
WARNING: If you leave your car standing and the fuel evaporates, it will leave a green
coloured resin inside your carb. This is extremely difficult to remove!
We now have a number of Stromberg and Solex kits in stock fitted with Viton o-rings and tubes. Such
7
CARBURETTOR AND EXHAUST
16
parts are currently expensive and hard to get, although some prices are coming down. We have a stock
of the fuel transfer tubes for Solex. O-rings and diaphragms for Stromberg also available separately
and we are looking into fuel pump components.
MkII choke lever knobs are on order for re-manufacture, please ask.
Guide prices for top grade stainless exhaust systems are given below. We will advise exact price and
supplier at time of order.
Cables of various kinds have been re-manufactured, and available in lengths either standard or to
order for special applications.
We often order items in bulk, so that we can pass them on to Club members at cost price.
5040454
7100239
7080109
7080134
7080231
7080268
7080271
7080275
MPK3051
30102
32021
7080374
7080396
7100118
7100453
7100183
7100239
9023007
9078077
7100239
7100327
7102723
7100920
Solex1+
Carburette
Solex
pump actuating rod and lever
R-clip pump actuating rod
air filter MkI std
spindle clip
choke pivot arm and control rod
diaphragm accelerator pump
choke pivot arm lower
spindle acc. w- butterfly
butterfly plate acc.
return spring
return spring
lock washer choke lever rod
Solex full service kit
tube fuel transfer in FKM Viton
gasket top
gasket bowl
spring
spindle choke
manifold-carb thick spacer
manifold-carb gasket thin
manifold-carb paper joint
rubber neck-joint for filter box
wing nut 1/4 UNC stainless for filter box
fibre washer for above
GFE1104 air filter std
inlet manifold drain pipe
acc. return spring
Solex carb B.30 PIH-5 19, 20, 22mm choke
Solex carb B.30 PIH-5 24mm choke
extra power maybe? Fitted with 125-45 jets
manual choke return spring
replacement spindle and butterfly
float valve 1.3mm
4
30
17
4
1
31
1
5
10
1
5
6
8
53
23
19
1
5
45
23
47
3
9
10
101
2
19
1
8
5.00
5p
2.00
20p
2.00
5.00
2.00
10.00
3.00
30p
30p
10p
20.00
2.00 *
1.30 *
1.30 *
30p
8.00
2.00
1.00 *
1.00 *
5.00 *
50p *
5p
5.00
5.00
30p
45.00
55.00
1
1
1
60p
8.00
8.00
7
CARBURETTOR AND EXHAUST
float valve 1.6mm
float
crush washer 10mm (float valve)
crush washer 12mm (jet cover)
Solex float
Solex float bowl
17
51
10
10
10
10
1
8.00
5.00
40p
50p
5.00
5.00
Assorted levers, springs, clips etc. available for Solex, please ask.
New Solex carburettors are available to order, 19mm, 20mm, 22mm and 24mm chokes (subject to
availability), but prices may vary. Please ask for more information.
5044259
5044639
B50MM
7103094
7100544
7100582
MPK109
7100800
adapt1
Stromberg
rubber diaphragm 125-150CDS
B57 air filter sport (pair)
M/cycle type filter, goes onto 2” neck
acc. return spring
fuel inlet T-piece replacement (non-original)
rubber neck-joint for filter box
Stromberg full service kit (1 carb only)
O-rings in FKM Viton material (set of 6)
inlet manifold for Strombergs
gasket carb-elbow
gasket carb-manifold
gasket for float chamber
choke unit and quadrant, rear carb
bowl float chamber alloy
float
adapter Stromberg to std manifold
crush washer 11mm (float valve)
4BA x3/4” bolt linkage w- nut and washer
adjuster cable to bkt carb end
51
17
5
1
88
6
ask
15
2
29
33
70
1
1
5
1
10
12
2
2.50
16.00
8.00 *
3.00
4.00
5.00 *
20.00
5.00 *
30.00
1.00 *
1.00 *
1.20
12.00
10.00
10.00
15.00
50p
1.00 *
4.00 *
O-rings available separately. Assorted spindles, springs, clips, levers etc. also available for Strombergs,
please ask.
1240303
CB1
Weber
back plate R/479 for air box
air box f/glass
assorted O-rings, clips, etc.
4mm ball for pump return
trumpet retain tabs
filter gauze
internal return spring
float valve
1
to order
ask
16
16
4
2
3
40.00 *
30p
1.00
2.00
2.25
6.00
7
CARBURETTOR AND EXHAUST
45.048.005
45.048.007
99.901.632
99.901.704
CM1
ISP2
7100090/ 1101
7100219
75221586
7102495
7103636
DCB4
18
rod knuckle end
O-ring plastic spacer later type
steel cups
conical rubbers w- cups
O-rings to manifold, various
O-rings to manifold, early type, in FKM Viton
linkage balance lever w- springs
linkage actuating lever, for cable
springs and cotter pins for above
lever
lever
gaskets, various
combined big bore manifold for twin Weber
big bore combined manifold
7
1
13
9
26
to order
17
4
*
1
2
*
ask
ask
Good second hand Items
filter box Solex c/w filter
trumpet Stromberg to air box
2
4
Petrol System
fuel pump new make
fuel pump paper joint
fuel pump thick spacer (?)
cork seal for tank sender early
rubber seal for tank sender late
bayonet fixing ring for tank sender late
fuel pipe full length 1/4” cunifer incl fittings
clips pipe
tank outlet sealing washer
olive 1/4”
nut
645/2 hose wide petrol filler neck
filler neck, screws onto front panel
AC BD-4 fuel pump overhaul kit
rubber seal petrol cap
cardboard seal petrol cap
filter in-line plastic
filter in-line glass-chrome
hose J30 lead free fuel 1/4” (per foot)
hose clips
also in stainless, approx 4x price
6
32
5
2
2
1
2
12
15
10
10
2
2
11
6
8
14
3
5
15
to order
Carburettor Controls
2.00
1.00
1.00
2.50
4.20 *
15.00
15.00
12.00
10.00
560.00 *
25.00
5.00
35.00 *
50p *
1.00
1.50 *
1.50 *
2.50 *
25.00 *
see brakes *
10p *
5p
1.00
16.00 *
16.00
14.00 *
1.00 *
50p *
3.00
6.00
1.30 *
50p *
7
CARBURETTOR AND EXHAUST
7010136
7050169
7080269
5058194
7095020
7096077+91
7096097+98
7096097
7096099+100
7096099
NBI187+SLI187
7102375
7102562
7102564
7102596
7102772
7103138
7103139
9784073
7103139
7200259
7050124
7100116
7100266
7100329
CW5
CW1
CW2
CW3
19
acc cable aluminium abutment to floor MkII MkIII
acc cable kit (incl rubber concertina)
clamp acc cable to lever
cable actuating lever
Z-clip, choke cable to carb
also fits heater valve
inner acc cable MkI no clevis fit your own
choke cable complete
acc cable complete std
acc cable inner only std
acc cable complete Sport
inner acc cable Sport
clevis pin and safety clip
return spring pneumatic acc.
spring return
pivot connecting rod
rod connecting with pivots
joint MkI acc cable abutment to floor
rubber cap for choke lever MkI and Van
choke handle retaining clip
choke operating lever
clip hose small
handle choke lever MkII re-made
MkI acc pedal only very rare item!
plastic clip choke cable to lever
Exhaust System
77054266 manifold std
A-bkt silencer std
silencer rear strap std
silencer rear strap sport
U-clamp silencer Sport 1-1/8” original
U-clamp 1-5/8” original
U-clamp large original
U-clamp silencer Sport 1-1/8”
U-clamp silencer 1-1/4”
U-clamp silencer 1-1/2”
U-clamp silencer 1-5/8” (42mm)
U-clamp silencer 1-7/8”
brass nut
fancy heat shield (stainless and alloy)
also available for Clan and G15
sport manifold mild steel re-made
sport silencer stainless
manifold 4-2-1 1-1/2” small bore
will take a simpler silencer or link pipe
11
4
1
1
7
2.50
5.00
1.00
80p
1.50 *
21
8
3
5
9
8
10
6
1
2
2
8
8
38
2
10
on order
1
8
3.00
13.00 *
11.00 *
4.00
12.00 *
4.00
2.00
3.00
30p
80p
3.00
80p
80p
50p
5.00
40p
8.00
1.00
1
14
11
24
8
5
4
4
8
1
4
1
9
2
25.00
5.00
1.00
4.00
1.50
2.00
1.50
2.00 *
1.50
1.50
2.00
2.00
50p
30.00
3
2
to order
110.00
190.00
170.00
8
TRANSAXLE AND GEARCHANGE
CW4
GS1
GSS1
GSM1
GJM1
GJS1
MM5
MM6
silencer stainless for above
std silencer stainless guaranteed
sport silencer stainless guaranteed
sport manifold stainless guaranteed
JS style manifold stainless guaranteed
similar to Janspeed small bore
JS style silencer stainless guaranteed
JS style small bore manifold
JS style big bore manifold
20
4
ask
ask
ask
ask
160.00
420.00
432.00
560.00
560.00
ask
ask
ask
432.00 *
450.00 *
600.00 *
*
*
*
*
Stainless exhaust systems are also available from:
P.D. Gough, Richard or Bob, The Old Foundry, Common Lane, Watnall, Nottingham NG16 1HD.
Tel: +44 (0)115 9382241; Web http://www.pdgough.com; e-Mail: info@pdgough.com.
8
Transaxle and Gearchange
Note: Original clutch covers are getting increasingly hard to get. If you have any used but reasonably
good units please keep them for re-conditioning. Laycock diaphragm type are now only available from
time to time. We can at present supply Laycock diaphragm and Borg and Beck spring and lever
clutches note, the ones we supply are the correct ones for the Imp. Alternative manufacture such as
QH and LUK are also available from time to time, please ask.
Please keep all clutch driven plates for re-conditioning.
All gearbox bearings, seals and O-rings including spigot bushes plus seals are currently available.
Note: Re-conditioned items carry a replacement warranty for six months from time of sale. If you
are not happy with what you have received, please contact us immediately.
7100131
7100132
7104070
7104129
7104302
7104367/ 4492
9163454
9168602
139082
7102178
Clutch and Controls
clutch cover 5-1/2” MkI
clutch plate 5-1/2” MkI
stud 5/16 x1-1/4” release fork clip to casing
retaining clip release fork
clutch pedal
pedal box c/w pedals and springs
release fork
pipe 1/4” to reservoir 30” long AN-4
cut to length
hose flexi slave cylinder
AN-4 thread both ends, so may need adaptor
adaptor for above to cylinder (washer included)
washer copper AN-4 for hose (AN-3 also available)
master cylinder 0.625”
10
7
20
3
2
see brakes
5
3
18.00
10.00
70p
75p
6.00
35.00
25.00
see brakes
2
15.00 *
2
27
see brakes
7.00 *
10p *
36.00 *
8
TRANSAXLE AND GEARCHANGE
clevis pin for pedal rod
clutch slave cylinder 7/8” (alloy)
0.625” repair kit
clutch slave cylinder repair kit
pedal rubber (pair)
clutch pipe front length 3/16” cunifer
clutch pipe rear length 1/4” cunifer
union nuts pipe male, female, AN-4 for 1/4” pipe
adaptor AN-3 to AN-4 for above
clips pipe
clutch complete Laycock type 6-1/4” re-con exchange (3 part)
clutch complete B&B type 6-1/4” re-con exchange (3 part)
clutch complete QH type 6-1/4” re-con exchange (3 part)
clutch cover 6-1/4” re-con exchange Laycock type
clutch cover 6-1/4” re-con exchange B&B type
clutch cover 6-1/4” re-con exchange QH type
exchange surcharge £10.00 refunded on return
clutch plate 6-1/4” recon exchange
only asbestos free available now
exchange surcharge £5.00 refunded on return
CRB release brg
cap head screw 5/16 UNF x3/4”
7104042
SP1963/ 2173
SP4190/ 2267
CC1
CC2
CC4
C1 7100438
C2 7100438
C4 7100438
P1-2 7100406/ 82
CRB 7204296
7100116
7102163
7102263
7102373
7102468
7102174
7104075
7104133
7104220
9107099
GLB1
7102312
7104006
7104007
7104045
9102031
9102229
21
Gear Change etc.
gear lever lower plate to floor MkI
sleeve clip for gear knob
lower boot gear change MkI
spring for gear lever ballcup
flexy coupling re-man
pinch bolt for flexy HT special
lock tab for pinch bolt
ring dowel for transaxle housing
inspection cover
spring ring for inspection cover
O-ring seal for inspection cover
gear lever ballcup “nylotron”
spider bush plastic gear change shaft
Bearings, Seals and Shims
shim pinion head brg 0.005”
shim pinion head brg 0.003”
roller brg inner race input shaft
seal input shaft clutch
seal output shaft diff
1
2
3
9
4
20
4
20
6
11
40
44
11
10
19
2
2
22
see
1
see
7
see
2
2
41
4
see
brakes
1
2
ask
5
ask
2.00 *
30.00 *
9.00 *
8.00 *
6.00 *
8.00 *
25.00 *
1.00 *
7.00 *
75p *
90.00 *
75.00 *
90.00 *
55.00 *
40.00 *
55.00 *
8
20.00 *
21
83
15.00 *
50p *
brakes
brakes
brakes
10.00
50p
5.00
50p
35.00 *
1.00
35p
50p
1.00
50p
50p *
5.00 *
10.00 *
1.00
1.00
2.00
3.00
3.50
8
TRANSAXLE AND GEARCHANGE
9196029
9188042
9188042
SCE0910
AIC0912
9192003
9192132
9192132
9192118
JH1612 needle roller brg input shaft
6204 ball brg input shaft tail end
6204-2RS ball brg input shaft tail end
spigot bush needle roller
spigot bush oilite
spigot bush needle roller 930 (?)
21075/21212 brg main tail end
48548/48510 brg main head end
48548/48510 brg diff output shaft RH
67048/67010 brg diff output shaft LH
7104012
7104018
7104021
7104023
7104034
7104037
7104091
7104157
7104158
7104160
7104161
7104163
7104164
7104165
7104166
7104167
7104168
7104172
7104173
7104174
7104175
7104176
7104178
7104180
7104181
7104197
7104198
7104199
7104200
7104203
7104207
7104210
5220875
Gears, Washers, Bushes and Synchro Hubs
1st gear early
spring synchro
plate synchro
2nd gear early
28 tooth (?) 3rd gear early MkI
4th gear early
reverse gear
washer 1st speed 0.094” (white)
washer 1st speed 0.096” (blue)
washer 1st speed 0.100” (black)
washer 1st speed 0.102” (green)
washer 4th speed 0.225” (red)
washer 4th speed 0.223” (white)
washer 4th speed 0.221” (blue)
washer 4th speed 0.219” (yellow)
washer 4th speed 0.217” (black)
washer 4th speed 0.215” (green)
(blue)
(white)
(plain)
(blue)
(brown)
(blue)
bronze bush 1st speed
bronze bush 2nd speed
(green)
(white-brown)
(white)
(white)
synchro spring cap for spring-ball type
27 tooth 3rd gear early
spring reverse plunger
ball brg for detent
baulk ring late
22
14
3
7
12
14
5
6
3
as above
to order
4
37
17
7
1
5
12
1
1
2
1
3
2
2
2
1
1
2
5
3
2
2
2
15
2
3
2
2
4
40
2
4
8
1
8.00 *
6.00 *
7.00 *
6.00 *
8.00 *
6.00
34.00 *
18.00 *
18.00 *
17.00 *
15.00
50p
50p
15.00
15.00
15.00
12.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
4.50
4.50
1.50
1.50
1.50
1.50
25p
15.00
50p
30p
9.50
8
TRANSAXLE AND GEARCHANGE
23
7104287
7104288
7104293
7104295
7104374
7104429
7104430
7104431
synchro hub+sleeve splined 1-2nd early
synchro hub+sleeve plain 3-4th early
reverse pinion for input shaft
reverse idler late
3rd gear late
circlip for synchro
synchro hub+sleeve splined 1-2nd late
synchro hub+sleeve plain 3-4th late
7
6
3
5
2
1
2
1
18.00
18.00
12.00
12.00
18.00
1.00
24.00
24.00
7104047
7104049
7104051
7104085
7104090
7104092
7104208
7104416
9133160
9207031
Shafts and Pinions
threaded dowel connects primary to input shaft
primary (clutch) shaft
input shaft very early
muff coupling
shaft lock nut
shaft reverse idler
input shaft early
input shaft late
tolerance ring for muff sleeve
circlip for muff cplg
15
9
2
1
5
2
3
8
1
147
60p
15.00
34.00
5.00
3.00
5.00
38.00
38.00
50p
10p
7095009
7104078
7104291
7104184
7104285
7104286
7104327
7104093
7104094
7104095
7104463
9107043
9107300
Selectors
interlock plate late
reverse gear detent plunger
selector shaft
selector detent spring
1-2nd selector fork assy (late)
3-4th selector fork assy (late)
reverse selector shaft late
reverse select support pivot
reverse select trunnion
pivot pin reverse lever
reverse lever late
O-ring oil seal selector shaft 1/2”
X-ring seal for early selector shaft
10
4
1
10
2
4
1
4
2
3
3
48
50
2.00
1.50
15.00
40p
18.00
18.00
8.00
6.50
4.00
4.00
4.00
30p *
50p *
Differential and Output Shafts
diff planet gear and pin set (late)
diff cage
lock nut output spider early
tab washer diff crown wheel bolt to carrier
diff inner adjustment sleeve
nut diff output shaft MkI
1
1
30
390
1
17
65.00
40.00
2.00
10p
2.00
2.00
7050179
7104107
7104114
7104125
9
SUSPENSION AND STEERING
7104390
9207031
9107143
9107089
9205009
9207098
GMB2
7102365
7104456
71241567
7164364
24
splined output shaft and spider late
circlip ring lock for splined sleeve
O-ring for output shaft
O-ring seal for diff adjuster sleeve
circlip for diff output shaft MkI
spring lock ring diff adjuster sleeve
3
11
50
5
10
40.00
10p
30p
50p *
20p
20p
Aluminium Castings and Misc.
Gearbox mounting bush re-man (pair)
dust excluder selector shaft
dust excluder metal type
gauze, bell housing
blanking plate
reverse gear cover (no breather)
stud 3/8 x2-1/4”
4
10
2
1
4
2
4
55.00 *
6.50 *
6.50
3.00
2.00
18.00
1.40
Good second hand Items
clutch fork
9
1
15.00
Suspension and Steering
Note: Re-conditioned items carry a replacement warranty for six months from time of sale. If you
are not happy with what you have received, please contact us immediately.
Front and rear road spring top cushions (insulators) are currently being re-made. Rear ones in stock
now.
Unfortunately there are very few front shock absorbers left now. Rear shocks are available plus a
small number of front ones which are now hard to obtain. We will maintain current prices as long as
possible. Special requirements can be catered for including re-conditioning and springs.
Bolt packs for suspension (16x bolts, nuts and washers all in BZP) does front and rear now available
at £28.00 plus PnP. We can also supply them in sets for front only (10x bolts, £18.00) or rear (6x
bolts, £10.00). A complete car set including bolts, screws and washers for suspension including the
brackets to floor is £44.00. These are “S” grade tensile as were the original spec. All bolts also
available separately, please ask. Some stainless bolts also to order at approx 2x price, please ask.
All wheel bearings are currently available. We can obtain the original spec rear wheel bearings, but
they are quite expensive, please ask for a quote as they may have to be paid for at time of order.
We can overhaul steering racks to order.
9
SUSPENSION AND STEERING
7102308
Siram
7050128/9
7080004
7102063
7102064
7102065
7102068
7102010 ?
SPF1427
SPF1427
7102100
7102102
7102104
7102326
7102493
7102493
7103331-2
7103496
7103629
7103629
SPF2092B
SPF0476
FWB1
9192133
9192000
9102093
Wheels, Tyres and Trim
thin trim for 4Jx12 MkI wheels (set4)
wheel trim Siram after market (set4)
stainless hub cap std dished
wheel nuts std
155/76/12 or 155/70/12 tyres for spare or trailor (ask)
Front Suspension
carrier stub axle RH
collet for spring platform Woodhead (pair)
bkt retainer spring top
insulator spring top front
bolt 7/16 UNF x2-3/4” shock abs (w- nut washer)
bush MkI short (single)
bush MkII longer (single)
polyurethane bush wishbone (set4)
polyurethane bush wishbone (single)
front hub thrust washer
nylon drive for speedo cable
seal for speedo cable to back plate
lock tab washer front hub
front spring brown stripe early (pair)
front spring odd one
wishbone RH-LH late
normally sold as a pair
front pivot bkt plate MkII
Woodhead shocks (pair)
shock absorber (odd one only)
fr shocks in short supply, so expensive now!
usually sold in matching pairs
bush top for front shock
bush bottom for front shock
polyurethane bush set (top 2 sides)
polyurethane bush set (bottom 2 sides)
polyurethane bush set (complete 2 sides)
front wheel brg kit (one side only)
44649/44610 brg inner
11949/11910 brg outer
seal grease front hub
bolt 7/16 UNF x2” vertical k-pin carrier (w- nut washer)
bolt 1/2 UNF x3” horizontal k-pin carrier (w- nut washer)
bolt 3/8 UNF-24 x2-1/2” fr pivot (w- nut washer)
bolt 3/8 UNF-24 x2-3/4” fr pivot (w- nut washer)
screw 3/8 UNF x1-1/4” fr bkt (set4 w- washer)
will supply 1” size
screw 5/16 UNF x1/2” and x3/4” rr bkt (set8 w- washer)
25
10
1
10
96
6
15.00
15.00
8.00
1.50 *
15.00
1
30
52
on order
6
2
2
on order
3
26
25
21
73
1
1
1
25.00
3.00
25.00
TBA *
1.90 *
4.00
5.00
45.00 *
10.00 *
90p
3.50
30p *
1.00 *
35.00
15.00
80.00
3
1
1
3.00
90.00
35.00
8
14
to order
to order
to order
11
to order
to order
22
6
6
6
6
3
1.00 *
4.00 *
12.00 *
18.00 *
24.00 *
18.00 *
16.00 *
11.00 *
3.00
2.00 *
2.20 *
1.10 *
1.20 *
2.70 *
5
3.00 *
9
SUSPENSION AND STEERING
Mountney1
Boss1
7103670
7050127
7050170
SSKP1
DU1014
DX1014
TRA1018
TRB1018
TFWTX08
DL1+
TR1+
7080171
7080298
TR1
7080300
7050166
7102968
D208206
7080006
7080007
7102110
7102118
7102119
7102123
SPF2345
7103676
9067518
9572083
Steering Wheels
leather steering wheel s/h 12” or 13”
subject to availability
boss for Mountney and other wheels
rubber crash pad for MkIII steering wheel, late
Steering Components
king pin kit early (pair)
QP640TC king pin kit late (pair)
king pin kit stainless
bush king pin (teflon lined)
bush king pin (brass, to ream)
thrust washer king pin
-ditto- thicker
bearing washer nylon faced
seals king pin (pair for one side)
cotter for king pin w- nut+washer
also available in stainless
Welch plug 13/16”
grease nipple std
nipple 45 degrees (for disc brake conversions)
full length adjustable track rod-drag link
track rod outer RH
both above with Fiesta ball joint
track rod inner MkI (thin) RH
drag link long MkI high pivot susp LH
QR1074 track rod outer RH
dust seal rubber for t.r. outer end
dust seal rubber for Fiesta ball joint
inner column MkII
nut column top
steering rack and pinion assy overhauled
exchange surcharge £10.00 refunded on return
Belville washer rack adjuster pad
gaiter rack centre
rack end boot (each)
lock plate tie rod bolts to rack
bolt tie rod to rack
plate tie rods bolt link
QR1112 bush tie rod rack end
polyurethane bush (set2)
steering arm 1/2 UNF thread LH
washer steering arm
lock nut steering arm
column U-clamp
26
1
35.00
to order
3
30.00 *
5.00
to order
8
to order
2
16
15
to order
9
15
10
20.00
36.00
50.00 *
4.00 *
3.00
2.75 *
2.75 *
2.75 *
2.00
3.00 *
20
50
10
on order
1
1.00 *
40p *
70p *
40.00
25.00
13
5
4
10
2
1
8
to order
8.00
25.00
20.00
50p
3.50 *
25.00
3.60 *
ask
150
3
10
74
4
1
17
to order
1
4
2
1
30p *
32.00 *
8.00 *
1.00
1.20
1.00
8.00
30.00 *
20.00
30p
60p
4.00
9
SUSPENSION AND STEERING
CTBE1
CTBL1
CTBF1
Pinch1
6001
6002
7080002
7080002
7080248
7080248
7103561
7103011
7103644
7103644
7103644
SPF0809
7102042
7102949
RWB1
9188044
9198013
7102010
SPF0916
9029217
MM3
7102051
7904172
21/892/1
bush column top pre-1969 “nylotron”
bush column top post-1969 “nylotron”
bush column top MkIII felt
pinch bolt 5/16 UNF x1-1/8” HT special column to rack
brg pinion lower
brg pinion upper
seal pinion shaft
O-ring pinion seal
O-ring adjuster seal
aluminium Plummer block and U-clamp
for Herald rack as on Ginetta G15
poly bushes also available
Rear Suspension
splined drive shaft hub end (Lotus)
splined drive shaft hub end NOS
Hardy Spicer type UJ GKN greasable
Hardy Spicer type UJ heavy duty
circlip of UJ
grease nipple long for UJs
drive shaft 7/8” inner only
lock tab washer rear hub
insulator spring top rear
shock absorbers (pair)
ditto shop-soiled (pair)
shock absorbers Van no bump stop (pair)
shock absorber (odd one only)
last at old price
usually sold in matching pairs
polyurethane bush set (top 2 sides)
seal grease rear hub
insulator bush shock top ea
wheel brg kit (one side only)
hard to get original spec brgs still at old price
6006/31 brg special rear inner
8506 brg special rear outer
rubber bush (single)
polyurethane bush trailing arm (set4)
rear hub nut 3/4 UNF x1-1/2” AF special
rr hub nut castellated with special washer (pr)
bolt 3/8 UNF x2” shock bottom (w- washer)
rear hub (Lotus)
bolt 7/16 UNF x2-3/4” trailing arm pivot w- nyloc nut
screw 3/8 UNF x1-1/4” cross member w- washer (set12)
will supply 1” size
Rotoflex Metalastik OEM Imp non-interleaved
27
94
97
1
4
2
3
9
40
38
to order
5.00 *
5.00 *
1.00
2.00
5.00 *
4.50 *
4.50 *
30p *
30p *
ask *
ask
1
8
to order
17
50
2
66
11
2
7
1
9
c.179 *
60.00
16.00 *
20.00 *
10p
90p *
10.00
3.50 *
14.00 *
65.00
50.00
65.00
25.00
to order
47
46
16
12.00 *
4.00
3.00 *
50.00 *
to order
to order
1
on order
33
to order
6
ask
12
3
18.00 *
33.00 *
7.00
48.00 *
6.00
40.00 *
95p *
c.139 *
1.90 *
8.00 *
ask
70.00 *
10
BRAKES AND CONTROLS
21/967/2
QL7000
7102038
SUK1
7103735
7103735
Rotoflex Metalastik OEM interleaved, comp or Lotus type
usually sold in matching pairs
Rotoflex std new QH type
96mm donut also fits Carpigiani ice-cream vans and some tractors
Rotoflex no name NOS
SUK Rotoflex NOS (old stock “emergency only”)
bolt Rotoflex (set6 w- nuts)
bolt Rotoflex Lotus type (set6)
bolt Rotoflex (single)
Good second hand Items
7/8” drive shafts c/w new UJs
10
28
2
12
95.00 *
1
35.00 *
1
4
20
1
5
40.00
20.00
18.00
12.00
3.00
35.00
Brakes and Controls
Note: Most service brake parts are available new to Unfortunately repair kits have gone up a lot
recently and the Girling ones don’t fit the new (correct size) front wheel cylinders. Master cylinders
are available in a range of sizes for servo or non-servo cars or trikes.
New standard and Goodridge style hoses are available for all requirements, but price has increased
slightly. We source items in bulk, so that we can pass savings on to Club members at near to cost
price. We also now stock all brake pipes in salt resistant cunifer 10 material (10:90 nickel:copper).
Clutch and fuel pipes are available in the same material. These can be made up to length for special
orders.
We can now provide direct front disc conversions which are a good modern alternative to the servo.
They are based on Ford Fiesta or KA components. You will need a 0.7” master cylinder which we
have in stock, see below, and to obtain your own re-conditioned calipers.
Note: We re-condition items such as brake shoes and provide a variety of friction materials, please
ask. Re-conditioned items carry a replacement warranty for six months from time of sale.
CVK12
CVK13
AHV550
SP2230
LV15069
9163306
Servo or Disc Brakes
front disc conversion kit for 12” wheels (pair)
front disc conversion kit for 13” wheels (pair)
brake servo MkIIa recon. exchange
servo repair kit MkIIa
Delphi servo non-return valve
General Brake Components
rubber connector for reservoir pipe 1/4” x2”
pipe 1/4” to reservoir 30” long AN-4
ask
ask
ask
to order
1
5
5
175.00 *
175.00 *
165.00 *
55.00 *
20.00
50p
9.00
10
BRAKES AND CONTROLS
7080024
7102055
39114081
39114081S
7102115
7102342
7102375
7102146
7102147
7102148
7102149
7102152
7103201/2
7103572
9166035
9166035
9166235
BH35/6
GS282
GS294
CTS1302-3
SUP5
64271022
SP1006
SP1023
7080014
7080016
7102178
64068330
64068956
SP1963/ 2173
SP2102/ 2172
SP2465
7080280-1
64675937
7080282
64673476
SP2027
SP2174
SP2295
cut to length
h-brake operating lever outer powder coated
brake drum
screw 1/4 UNF x1/2” drum retain
screw 1/4 UNF x1/2” drum retain, stainless
back plate front RH-LH
pedal box assy c/w pedals and springs
spring pedal return
push rod master cyl
clevis pin push rod w- split pin
h-brake ratchet
h-brake pawl hardened steel
spring h-brake operating button
rivet for h-brake lever
grommet dust seal h-brake lever
clevis pin h-brake cable w- split pin
cable h-brake RH-LH early
cable h-brake late
hose vacuum servo 20” long
hose vacuum servo 36” long
pipe sleeve
pedal rubber MkI-II (pair)
rear brake shoes (axle set)
front brake shoes )axle set)
rally spec brake shoe set fr or rr
snail cam adjuster kit front (set4)
brake adjuster rear
steady rest hold down kit rear
steady rest hold down kit front
spring front brake pull off (set of 4)
spring rear brake pull off (set of 4)
master cylinder 0.625” (std)
master cylinder 0.7” (servo or disc brakes)
master cylinder 0.75” (larger disc brakes or kit car)
repair kit 0.625” master cyl
repair kit 0.7” master cyl Sport
repair kit 0.75” master cyl
wheel cylinder front 0.7” LH-RH
this is the correct size
wheel cylinder front for van 0.625”
dust seal front cyl
spring push out front cyl
wheel cylinder rear 0.75”
bleed nipple cyl 3/8” UNF
repair kit rear wheel cyl (each)
repair kit front wheel cyl (each)
repair kit FWC van (axle set)
29
1
4
56
10
6
3
3
4
3
7
6
2
43
15
18
38
on order
2
1
9
9
5
24
ask
1
2
6
2
33
7
4
5
to order
3
30
2
11
10.00
25.00
60p *
1.00 *
15.00
35.00
1.50
5.00
2.00 *
5.00
1.50
1.00
50p
10.00 *
40p *
13.00
13.00 *
3.00
4.00
10p
8.00 *
18.00
18.00
45.00
14.00
14.00 *
6.00 *
6.00
4.00
4.00
36.00 *
36.00 *
36.00 *
9.00 *
8.00 *
9.00 *
12.00 *
4
9
1
7
13
10
16
2
12.00
1.00
30p
12.00 *
1.00 *
3.00
3.00
8.00
11
ELECTRICAL COMPONENTS
7080025/ SP2861
64047352
64047371
GH4
GH2F
GH2R
5 VAT 9155022
30
clips and dust seal rear cyl (axle set)
incl horseshoe clips and rubber dust seals
hose flexi rear AN-3 w- fittings
hose flexi front AN-3 w- fittings
hose Goodridge style AN-3 (set of 4)
hose Goodridge style front AN-3 (pair)
hose Goodridge style rear AN-3 (pair)
pipe kit cunifer brake AN-3 threads
pipe kit cunifer brake for servo (Sport)
individual pipes also available, please ask
clips pipe
union nuts pipe male, female, AN-3 for 3/16” pipe
male-male adapter, AN-3
AN-4 male fitting for 3/16” pipe
3 way junction brass AN-3
4 way junction brass AN-3
5 way junction brass AN-3
washer copper AN-3 for brake hose
3
10.00 *
2
4
on order
1
on order
2
to order
7.00 *
9.00 *
55.00 *
30.0 *
25.00 *
90.00 *
90.00 *
30
177
2
4
1
1
1
30
75p *
75p *
1.00
1.00
11.40 *
11.00 *
14.00 *
10p *
Disc brake conversion kits can be obtained from:
Colin Valentine, Hawthorn Farm, Wetherby Road, Rufforth, York YO23 3QB Tel: 01904 738708;
e-Mail: colinjvalentine@gmail.com
11
Electrical Components
Note: New parts being produced include: a variety of H.T. leads to order made up by ourselves. Most
other electrical service components for both standard road and competition cars can be obtained new
to order. Prices may vary. Beware of cheap imports sold on the Internet.
Foam lamp gaskets are now in stock again. These are available individually or in car sets at £12.00
for the early L717 front side-indicator lamp assy or the later L792 assy. Please state which you need.
If you’ve got the Wipac push on rear lamps, you will only need the front gaskets.
PSE1
PSE2
PSE3
HnH1
HnH2
Special Orders
PowerSpark 25D4 distributor
PowerSpark 45D4 distributor
PowerSpark electronic ignition, 25D4 or 45D4
25D4 distributor, re-manufactured
25D4, electronic, re-manufactured
wiring loom (need details of car)
General
to order
to order
to order
to order
to order
ask
60.00 *
60.00 *
30.00 *
85.00 *
145.00 *
c.230.00 *
11
ELECTRICAL COMPONENTS
1205552
1801197
1801197
5037524
7080224
7102184
7105069
37344
L227541
L54218811
7100121
CW6
7100218
7100298
7100380
7101097
7101097
7105103
7102187
9077700
I51610
FL512
8FL
L251108
L54244848
5037422
HT5
HT5+
DC101
DC106
DC108
K22438
L420620
AC
RN7Y
N9Y
RC9YCC
N60Y
temp sender std red top
voltage stabiliser BR1303/20
voltage stabiliser BR1303/20 (solid state)
clips dizzy cap (pair) 25D4
clamp dizzy
weights dizzy (pair)
34901D indicator cancel switch MkI MkII
cancel pawl actuator (clamps onto column)
temp sender early type
Lucas RB340 NCB132 control box for 22A dynamo
brush set C40-L dynamo
bush bronze for C40
brush spring and lucar set for 16ACR alternator
dynamo rear support bkt
alternator rear support bkt
alternator bolt set
dizzy vacuum pipe, incl connectors
dynamo adjusting strap short
oil pressure sender 30-50 kPA
60-90 kPa or 30-50 kPa available
dynamo adjusting strap medium
dynamo adjusting strap long
battery lead +ve earth Mk I round terminal
battery lead -ve earth round terminal
earth strap, long
fuel tank sender unit early
fuel tank sender unit late
fitting parts also available
brake light switch
flasher unit 35020A 12V 42W early round
flasher unit type 36 late rectangular
Lucas brush set M35G starter motor
Lucas insulator set M35G starter motor
Lucas brush set M35J starter motor
instrument lamp and holder, MkI-II
H.T. leads set early type screw in
H.T. leads set late type push on
Lucas type dizzy cap MkI MkII
Lucas type dizzy conversion cap
Lucas type dizzy cap MkIII
carbon brush and spring for DC101
dog, dizzy drive
AC sparking plug (set4)
Champion RN7Y cool sparking plug (set4)
Champion N9Y sparking plug (set4)
Champion RC9YCC sparking plug (set4)
Champion N60Y sparking plug (set4)
31
4
1
1
1
1
1
13
1
5
2
6
1
3
2
14
2
4
5
8
9.00 *
12.00
14.00 *
2.00
5.00
5.00
8.00
60p
9.00
25.00 *
3.00
2.00 *
4.00
2.00
15.00 *
4.50 *
4.00
1.50
9.00 *
7
3
2
4
13
3
1
1.50
1.50
1.50
1.50
1.50
36.00 *
32.00 *
7
9
1
3
2
2
1
2
on order
23
4
6
4
1
2
1
2
2
1
9.00 *
8.00 *
6.00
6.00
3.00
6.00
2.00
15.00
16.00 *
9.00 *
7.50 *
7.50 *
2.00
10.00
8.00
10.00
10.00
10.00
10.00
11
ELECTRICAL COMPONENTS
AG901
BP6ES
BCPR6ES
B8ES
B10EV
7100863
DLB101
DLB105
54413549
CD101
B1340
CD111 or 112
CB101
CS101
DSB101C
CS108
RA101
DRB101C
RA108 or 110
25DK
54412154
54419792
54422372
LRD100
7101067
LRA100
MM7
LRS102
LRS536
LRW110
L2ST
L2ST
L4ST
L4ST
FOAM8
RER22
L2200
7105128
L578218/ 4220
7105349
Autolite AG901 racing plug (set4)
NGK BP6ES sparking plug (set4)
NGK BCPR6ES sparking plug (set4)
NGK B8ES plugs sparking plug (set4)
NGK B10EV sparking plug (set4)
dust cover rubber “tutu” spark plugs (set4)
ignition coil Lucas std
ignition coil Lucas sport 3 2
lucar connectors coil or solenoid
L.T. lead for 23D-25D dizzy
condenser early
423871 condenser genuine Lucas
condenser late
contact set very early
contact set early
contact set early genuine Lucas
contact set late
rotor arm early
rotor arm early genuine Lucas
rotor arm late
25D4 emergency kit (points, condenser, rotor arm, L.T. lead)
25D4 base plate Lucas lower
25D4 base plate Lucas upper
23D4 base plate Lucas fixed
C40-L dynamo 22A
dynamo pulley c/w fan
17ACR alternator 36A or up to 45A type
alternator 45A Denso
alternator pulley
M35J starter motor 9 teeth
M35J+ starter motor pre-engaged 9 teeth
Lucas wiper motor 14W 2 speed (late)
drive gear 14W 105 degree
strap and pad
76703 starter solenoid Lucas (early)
76703 starter solenoid budget (early)
starter solenoid genuine Lucas (late)
starter solenoid budget (late)
Lamps and Lenses
lamp gasket car set, state which
reflex reflector and chrome trim MkI-II (pair)
gasket lamp type L691-2
lamp assy L719 number plate
glass number plate lamp
lamp assy L534 number plate Sport
32
1
3
1
2
1
6
1
25.00 *
10
5
10
1
8
10
14
4
3
16
2
21
2
1
1
3
to order
1
to order
ask
2
to order
ask
1
1
to order
to order
to order
3
to order
10.00
10.00
12.00
16.00
18.00
2.00
20.00 *
10p
4.00 *
4.00 *
6.00
5.00 *
4.00
4.00 *
6.00 *
4.00 *
4.00 *
6.00 *
4.00 *
12.00 *
10.00
10.00
10.00
80.00 *
10.00
55.00 *
102.00 *
6.00
75.00 *
90.00 *
52.00 *
15.00 *
10.50 *
25.00 *
20.00 *
15.00 *
12.00 *
in stock
2
200
3
5
4
14.00
22.00 *
1.60
12.50
5.00
12.50 *
11
ELECTRICAL COMPONENTS
L574825/ 3915
7080196/8
7080197/9
Screw717
7105022/3
L3638
L3637
75066181
Screw792
71271997
L6307
L6308
77080522/3
L691
L692
L692R
7200643
75062891/2
SB5731
SB5712
LRB380
LRB207
B254
30242
30243
9020046
glass and cover only number plate Sport
front side lens L717 early RH-LH
front indicator lens L717 early RH-LH
screw 1-1/2” L717 (pair)
side-indicator assy L717 early RH-LH
Note: lamps for Imps only, very hard to get now
back gasket for L717
inner gasket for L717
VEGA front side-indicator lens L792 late pair
side-indicator lens export all orange-clear L792 LH only
screw 1” L792 (pair)
spire-speed clip lamp to body screw (pair)
side-indicator assy RH-LH L792 (black, kit car?)
back gasket for L792 (MkIII or kit car)
inner gasket for L792 (MkIII or kit car)
rear L692-1 lens screw on red-clear-orange
rear indicator assy L691
rear red stop-tail assy L692
rear reversing assy L692
Wipac 266 rear red-orange-clear lamp assy
rear lens Wipac 266 push on red-orange-clear
5-3/4” sealed beam unit 37.5-60W RHD
5-3/4” sealed beam unit 50W main beam
bulb stop-tail
bulb indicator
bulb side 5W or 6W
7” headlamp Wipac or Lucas H4 halogen (pair)
7” headlamp budget H4 halogen (pair)
5-3/4” headlamp Wipac or Lucas H4 halogen inner or outer (pair)
5-3/4” headlamp budget H4 halogen inner or outer (pair)
headlamp fitting components and bowls all available
courtesy festoon bulb, 6W
dashboard bulb
bulb 4W round
bulb dash 2.2W capless
H4 halogen bulb
bullet connector 4.7mm (to solder)
bullet connector sleeve (single)
bullet connector sleeve (dual)
spire nut rear lamp fix
lucars assorted
spade connectors assorted
fuses assorted
in-line fuse holder
For grommets, see under Body.
33
2
20
21
25
11
6.00
4.50
5.50
30p *
50.00
62
62
1
5
25
32
3
38
38
19
2
3
1
26
12
2
2
40
40
20
to order
1
to order
to order
to order
9
11
7
10
6
50
100
23
158
1.50
2.30
24.00
8.00
30p *
25p *
45.00
1.50
2.30
6.00
19.50 *
19.50 *
19.50 *
18.00
6.00
15.00
10.00
60p *
55p *
50p *
50.00 *
30.00 *
50.00 *
30.00 *
POA
75p *
50p
50p
45p *
2.50
20p *
30p *
35p *
25p
4
12
DASHBOARD AND CONTROLS
40905
41132
41190A
41456
41551
12
Good second hand Items
Smiths oil pressure gauge
Smiths ammeter
Smiths temp gauge
Smiths fuel gauge
Lucas 25D4 MkI dizzy
Lucas 25D4 Sport dizzy (early)
Lucas 25D4 Sport dizzy
Lucas 45D4 MkIII dizzy
Lucas 45D4 MkIII dizzy
Lumenition complete for 25D4
34
3
2
1
1
1
1
3
3
1
1
10.00
10.00
10.00
10.00
10.00
20.00
30.00
10.00
20.00
Dashboard and Controls
7080041
7080060
7080463
7080093
7080481
7102427
7105027
L35572
L119SA
L119SA
L119SA
7105198
7105328
7105328
7102108
7080092
7200643
71241567
7211153
71046630
71046630
75063462
71267251
1800176
L34734
fuel gauge Rootes
replacement stalk for 7105134
speedo head MPH Chrysler screw or push on cable
Smiths speedo, after market, 120MPH black bezel
bulb holder for temp gauge lamp
printed circuit board MkIII
instrument panel outer black plastic MkIII
cancelling pawl strg column MkIII
head lamp dip switch MkI MkII (not Stiletto)
indicator-horn switch MkI MkII (not Stiletto)
multi-function column switch MkIII original NOS
multi-function column switch MkIII original s/h
multi-function column switch replacement MkIII
1cm longer than original
temp gauge MkI MkII
fuel gauge Stiletto complete
fuel gauge Stiletto (no chrome)
speedo cable 51” (LHD) 55” or 57” screw or push
inner speedo cable 55” or 57”
oil pressure gauge electric
blank instrument facia plug 2”
red-blue heater quadrant MkI
clip washer operating ”nipple”
ignition switch 3-position 31912 L47SA (chrome with keys etc.)
ignition switch 4-position 35598 L47SA (chrome with keys etc.)
ignition switch L157SA MkIII (behind strg lock)
w- screen wash-wipe switch-plunger MkIII
3-position switch lighting type L57SA
3-position switch L57SA centre-off
6
2
4
1
1
1
1
1
11
6
1
1
3
15.00
6.00
35.00
50.00
2.00
25.00
15.00
2.00
20.00
35.00
35.00
15.00
25.00 *
2
1
1
14
17
1
2
3
6
1
on order
to order
1
1
1
25.00
20.00
15.00
16.00
7.00
20.00
1.20
1.00
20p
20.00
25.00
25.00
18.00
16.00
16.00
*
*
*
*
*
13
BODY AND FITTINGS
SPB200
7204108
7204108
9215122
TX1
122384
Duct
13
switch single throw MkIII
heater control knob only round
cable bonnet release
cable bonnet release outer only
brass insert cowl securing screw MkIII
heater control valve in-line alternative
bulb holder, Stiletto dash, blue
air ducting 82mm (per metre)
35
to order
1
3
1
33
2
1
ask
10.00 *
10p
12.00
7.00
25p
20.00 *
1.00
20.00 *
Body and Fittings
We have sourced modern laminated and heated glass windscreens are currently investigating remanufacture of rear screens. Front screens are now available for Imp Club members. Heated screens
carry a warranty of 90 days on the element. Water is the biggest problem for heated glass. It is very
important that no water can get to the edge of the glass or the element will start to fail very quickly.
All rubber fit screens must be sealed with the correct grade of non-setting windscreen rubber fit sealer,
such as INDASA. If this in not done the warranty will be void. For wiring diagram click here.
Screens can be posted within UK at an extra cost of £44.00. For shipping overseas please ask. We
may refer you to our supplier.
Hand brake rubber grommet, 7” headlamp seals, engine lid buffers, fan cowl gaiter, bonnet stay rubber
clip and mirror stem buffers are available again. All 1/4 vent seals gone now, but more are on order.
Some rubber items are still on the list for re-manufacture, including many of the smaller items.
Note: Re-conditioned items carry a replacement warranty for six months from time of sale. If you
are not happy with what you have received, please contact us immediately.
VIN1
VIN2
VIN3
5112272
72879A
P.45645
5063408
7080064
7200006
7080151
Saloon and General
VIN plate Chrysler large
VIN plate Chrysler small
VIN plate Rootes small
truss-head rivet glove box check strap fix
72821A wiper drive pinion and spindle
nut spindle
seal spindle outer 5/8”
spacer spindle rubber 1-3/8” x5/8”
wiper drive tube (car set)
trunnion
wiper drive rack
bolt bumper (set of 4) 1”
screw metal headlamp adjuster
nut plastic headlamp adjuster
ditto in Lucas kit with spring (one side)
headlamp fitting components and bowls all available
mirror head larger, slight tarnish
ask
ask
ask
26
2
4
3
3
2
1
1
5
73
70
to order
to order
1
18.00
12.00
12.00
20p
20.00 *
1.00 *
1.00
1.00
18.00 *
12.00 *
6.00 *
60p
35p
3.00 *
ask
10.00
13
BODY AND FITTINGS
7080313
7080315
7080234
7096069
7102319
7200009
7200036
7200170
7200295
7200872
7204000
7204000
7204054
7204059-60
7204071
7204072
7204109
7208981
7208981
7204111
7204113
7204116
7204117
7204127
7204143
7204194-5
7205007/ 174
7207354
7207394
7207399
7208292
7200761
5112272
7209279
7210526
7210687
72240550-1
72273267
lock cylinder door RH with keys
lock barrel with keys, rr hatch
rr hatch lock assy c/w keys
rivet 1/4 vent light hinge pin
ashtray early Super-Sport-Chamois
clip MkI “Hillman” badge on steering wheel
screw 5/16 UNF x1” bkt to body (stainless)
cage for captive nut washer jet
square nut for 7200009
w-screen washer T-piece
rubber buffer int. mirror to w-screen
rubber buffer engine lid top
rubber buffer engine lid bottom edge
rubber buffer battery
chrome bezel front grille fixed (no badge)
bonnet hinge (pair)
bonnet hinge NOS (single)
engine cover latch RH-LH
door striker early (LH only)
waist seal fluffy door to glass
waist seal door outer rain strip
screw chrome holds rubber seat strap
rubber diaphragm seat 15-3/4” with hooks
rubber diaphragm seat 14-1/2” x13” with hooks
return spring bonnet lock
spring bonnet latch safety
rear vent chrome for early saloon
rubber retainer for bonnet stay
also fits van oil filler lid
valve-filter one way for washer bag
pin 1/8” x5/8” int. door handle
mldg rear hatch surround
seal 1/4 vent light, new re-made (pair)
clip int. light cable to w-screen header
seal rubber w-screen saloon
filler strip w-screen chrome effect
handle winder late
trim clip upholstery
bkt ashtray support and heater Chamois MkI-II and Sport
seal 7” h-lamp re-made (pair)
RR010 rivet expanding black for above
stubber-spring ash tray late
“Hillman” silver letters with black backing
glues onto Chrysler aluminium front panel
O-ring seal for washer jet chrome finisher
seal rubber washer jet outer
striker door RH-LH
spring, door opening lever return
36
10
2
1
26
3
2
6
8
51
2
5
32
24
1
1
4
1
1
7
19
16
12
1
2
3
3
1
4
20.00
15.00
40.00
30p
12.00
30p
80p *
90p
20p
1.25p
1.50 *
3.00 *
3.00 *
3.00
15.00
42.00 *
20.00
6.00 *
9.00
6.00 *
13.00 *
1.50
17.50 *
25.00 *
2.00
2.00
6.00
5.00 *
4
180
1
28
30
3
6
3
12
1
7
125
2
99
2.00
15p *
4.00
85.00 *
30p
40.00 *
8.00 *
3.00
30p
1.00
28.00
40p
80p
1.00
26
2
2
1
50p *
15p *
6.00
2.00
13
BODY AND FITTINGS
Tex U71300
Tex B05012
Tex U77300
Tex B12312
Tex B12814
Trico13
7205034
77096059
7209716
7211207
7209079
77211386
77211426-7
RSWR2
75062821
7200013
7200015
7210656
7210656+
7210656+
39235161
door card plastic non-warp
cover with own vinyl or other finish
capping assorted door etc. for Rootes cars
capping trim rear for Rootes
wiper arm adjustable 5.2mm (pair)
wiper blade 5.2mm 12” (pair)
wiper blade 12” 5mm budget (pair)
wiper blade refill pack 12” (pair)
wiper blades 12” std saloon black (pair)
wiper blades 12” (odd one)
wiper arm adjustable 7.2mm (pair)
wiper arm adjustable black 7.2mm (pair)
wiper arm adjustable chrome 7.2mm (pair)
wiper blade 7.2mm 12” (pair)
wiper blade 7.2mm 14”
wiper blade Trico type 7.2mm 13”
wiper blade 12” 7.2mm budget (pair)
wiper blade refill pack 13” (pair)
escutcheon engine lid handle
bolt 1/4 UNF x1-1/4” (?)
1/4 vent light glass saloon late
check strap glove box Chrysler w/ rivets
heater matrix MkI
glove box lock and keys MkIII
rear hatch seal inner to frame
rear hatch seal outer to body
window regulator RH-LH
rear side window rubber seal saloon (pair)
domed nut and bolt rear hatch stay
domed nut only
door window channel late (set of 3 for 1 door)
door window channel early type car set (15’)
bonnet seal, approx 1.7m original-ish shape
rear bumper blade sport
headlamp adjuster screw, plastic
h-lamp mounting yoke RH-LH
h-lamp mounting bkt stop MkI
door hinge pin (set 4), 1/4”, 6.5mm or 6.75mm
windscreen laminated
windscreen heated laminated
windscreen laminated Monte Carlo
windscreens need to be collected
top tint 25.00 extra, please ask
screw 5/16 UNF x1” csk for door hinge
screw 5/16 UNF x1” transom (stainless) w- washer
will supply 1/2” and 3/4” size
cup plain screw trim finisher
37
6
15.00 *
6
2
on order
on order
1
17
8
7
on order
2
2
on order
1
1
1
18
1
8
2
1
1
1
3
3
2
on order
4
2
19
8
6
8
17
10
1
ask
to order
to order
1
ask
ask
24.00 *
18.00 *
15.00 *
5.00
8.00
3.00
25.00 *
25.00
25.00
18.00 *
9.00 *
9.00
15.00 *
5.00
2.00
80p
4.00
1.50
30.00
20.00
19.00 *
16.00 *
15.00
75.00 *
1.50
50p
13.00 *
26.00
11.00 *
90.00
50p
5.00
1.50
20.00 *
150.00
220.00
220.00
10
12
1.50 *
60p *
58
10p
13
BODY AND FITTINGS
38
cup small plain screw trim finisher
cup star screw trim finisher
50
7
184
5
12
43
19
11
186
200
6
164
5940454
9131180
9143305
9143322
9143387
9178579
screw 1/4 UNF x1” pan head
screw 1/4 UNF x1” csk for striker (stainless)
clip door card
clip rr trim pad
truss-head rivet wheel arch covers
truss-head rivet finisher and parcel rail fix
truss-head rivet finisher
screw 3/16 UNF x7/16”
7100741
7201466
7202508
7205064-5
ICL1
ICL2
CW7
CW8
CW9
7210056-7
ICL4
DT1
KL1
KL1A
KL2
KL3
KL4
KL5
KL6
KL7
KL8
KL9
KL10
KL11
KL11A
KL12
KL13
KL14
KL15
Saloon Body Panels
bkt engine mount early
part of transom supplied separate
bkt re-inforcing for petrol tank attachment
blanking plate pedal unit early
bkt front chassis rail RH-LH late
rear wing fillet LH NOS
floor panel RH-LH
rear wing section up to swage line RH-LH
7200164 hanger number plate front galv
bkt no. plate for Sport lid powder coat
bkt support for above on glass fibre lid
bkts no. plate for Sport lid stainless
7200164 hanger number plate fr stainless
door hinge plate galv c/w screws
front cross member repair
front cross member without extension
floor edge section 6”
floor edge section 8”
inner sill
front valance (below lights)
rear cross member repair
rear suspension cone
rear lower corner
front wing complete
front wing front section
bonnet front inner section
bonnet front outer section
bonnet front outer section
front wing rear section
front wing arch section
rear arch section
front wing fillet
10p
10p
50p
1.00 *
42p *
35p *
20p
15p
15p
50p
1
12.00
2
1
10
3
3
on order
18
12
12
1
3
on order
ask
ask
ask
ask
ask
ask
ask
ask
ask
ask
ask
ask
ask
1
ask
ask
ask
ask
2.00
8.00
10.00
15.00
75.00
130.00
4.00 *
8.00 *
1.00 *
15.00 *
6.00
12.50 *
174.00 *
114.00 *
72.00 *
84.00 *
48.00 *
84.00 *
42.00 *
36.00 *
96.00 *
360.00 *
60.00 *
108.00 *
132.00 *
75.00
54.00 *
106.00 *
108.00 *
54.00 *
13
BODY AND FITTINGS
KL16
KL17
CW10
FC1
FC2
FC3
FC4
FC5
FC6
FC7
FC8
FC9
rear wing fillet
battery box
battery tray
works type dash
rear wing
rear transam
sport engine cover
front panel
front wing
bonnet
twin 40s 4” air box
doors (pair)
39
ask
ask
4
ask
ask
ask
ask
ask
ask
ask
ask
ask
*
*
10.00 *
45.00 *
175.00 *
55.00 *
150.00 *
120.00 *
170.00 *
170.00 *
45.00 *
450.00 *
Please ask for delivery cost on larger panels, repair sections and radiators.
5240454
7096002
7200364
7200427
7204094
7204135
7207064
7065998
7066018
7065806
7065905
7208009
7204168
7208133-4
7208291
7208712
7208952
7209007
7209094
7209687
7206510
7206510
External Trim, Badges, Clips etc.
clip ext mldg (metal, which?)
clip ext mldg MkI sqare
engine cover rubbing strip
rivet exterior trim early DeLuxe
external trim MkI between door and bonnet
closing finisher w-screen filler
mldg, Chamois thin curved
RH cushion cover mid-Green
squab set RH Red 192
cushion cover fr Red 192
cover seat rear Red 192
clip ext side plastic mldg
mldg centre finisher no. plate surround
end cap grille RH-LH Chamois
spire clip interior waist finisher int. to door
clip mldg 3/4” rectangular plastic Super
“Sunbeam” pressed aluminium with red paint
“Hillman” pressed aluminium with black paint s/h good
“Sunbeam” chrome script badge front or rear panel
mldg strip
“Imp” script side badge
“Hillman” bonnet letters MkI (set, s/hand)
rear RH wing mldg Sport red
rear RH wing mldg Chamois white
door side mldg Super white
door side mldg Super black
door side mldg DeLuxe
front side mldg Super black
front side mldg DeLuxe
set early trim number plate surround
100
40
1
10
1
47
1
1
1
1
1
150
1
1
49
101
1
1
19
1
1
1
1
2
1
2
1
1
1
1
30p
50p
5.00
10p
5.00
1.00
15.00
15.00
15.00
15.00
20.00
35p
1.00
3.00
25p
65p *
15.00
15.00
15.00
4.00
12.00
10.00
15.00
15.00
10.00
10.00
10.00
12.00
12.00
15.00
13
BODY AND FITTINGS
7210305
7210306
7211680
9034097
9034154
9096070
9129586
9130018
9130038
9130041
9130042
9130066
9130728
9132412
9132944
9132946
9132999
9178589
9620005
front grille Super
end cap for Super front grille RH-LH
“Sport” door badge w- bezel s/h good
“Sport” door badge plastic insert s/h good
“Sport” rear wing rectangular side badge red
nut fastner for engine lid rubbing strips
nut black plastic
clip
clip mldg 5/16” Stiletto or DeLuxe
also fits rr hatch surround mldg early type 20x reqd.
also fits rr no. plate surround mldg 12x reqd.
clip D-shape large seat cover
spire clip large
clip waist seal outer (pack of 12)
clip rectangular seat cover
clip rear pocket finisher
clip waist seal outer thicker type (pack of 12)
stud tee DeLuxe trim
friction bush for most badges 3/32”
friction bush for badge 1/8”
friction bush larger
friction bush for badge 3/16” MkIII
spire nut rr interior waist finisher to body
clip waist seal inner (pack of 12)
spire nut remote bonnet lock
clip rr hatch mldg MkIII, 8mm Volvo type
retainer plastic nut fr grille MkIII
40
3
3
1
1
1
695
130
12
on order
25.00
3.00
15.00
12.00
18.00
5p
5p
25p
45p *
6
3
8
20
3
2
10
860
8
5
19
9
1
84
69
130
30p
15p
5.00 *
20p
25p
5.00 *
25p
15p *
25p *
25p
25p *
25p
5.00 *
20p
1.00 *
15p
We are now able to supply a full range of grommets and bungs to fit the Imp body shell. You will
need to tell is the size and qty required as cars may vary. We buy trim clips, o-rings, grommets and
similar items in bulk, so that we can offer them to Club members at near to cost price. We can add to
the range for special requirements, please tell us what you need including the size. The types available
are as follows.
open: plain standard rubber grommet, e.g. for brake pipes and cables;
blank: rubber to fill holes, can be perforated for pipes, cables etc.
PVC: PVC blanking, e.g. for floor bungs;
wiring: Lucas soft rubber type for harness, hoses etc.
sleeve: special, e.g. for wiper rack tube through bulkhead, may be hard to obtain.
B16
Grommets etc.
5/8” bung floor plastic rr
50p *
13
BODY AND FITTINGS
B25
13988500
7211173
7211174
BG16
BG22
BG24
BG32
BG38
BG??
C501
C502
C505
C507
C509
C510
806443
1045489
??
G10
G12
G14
G15
G16
G22
G24
G32
P25
41
1” bung floor plastic fr-rr
grommet blank metal 1” 12
oval bung rr slinging holes
oval bung fr slinging holes
5/8” blanking
22mm blind grommet
24mm, use for hydraulic pipes
1-1/4” blanking
1-1/2” blanking
blanking for heater box top
Lucas type 1/2” fuel pipe and cables rr
Lucas type 3/4” for horn and clutch pipe
Lucas 7/8”
Lucas type 1” hydraulic pipes fr
Lucas type 1-1/4” harness fr
Lucas type 1-3/8” hose fr+rr
Lucas type 1-1/2” harness rr
Lucas type 22mm clutch pipe rr
Lucas C5774A wiper rack 1-1/4” “volcano”
heater control cable through bulkhead
0.4” cables fr-rr bulkhead
1/2” cables rr
9/16” for fuel pipe fr
15mm speedo cable thru rack support
5/8” for cables fr
7/8” acc cable through floor
24mm hydraulic pipes fr
1-1/4” open grommet
plug metal 1” rr floor
body hatch lock
Californian, Chamois Coupé and Stiletto
front grille Californian
backing plate for front panel 4 h-lamp models
7209034
“Chamois Coupé” wing badge s/h good
“Californian” wing badge s/h good
7211471
windscreen laminated
7211471+
windscreen heated laminated
windscreens need to be collected
top tint 25.00 extra, please ask
9020038
spire nut Chamois coupé (?)
9129605/ 5240454 mldg clip (metal) Stiletto
7206516
Van and Husky
8
55p *
95p
n/a
15
5
10
13
5
8
6
9
4
3
to order
2
12
5
4
1
19
20
17
2
5.00 *
40p *
30p *
30p *
50p *
50p *
50p *
50p *
50p *
60p *
85p *
1.00 *
1.20 *
1.50 *
95p *
2.50 *
20p *
20p *
20p *
40p *
40p
50p
50p
50p *
85p *
6.00
1
8
12
1
3
2
3
2
to order
2
25.00
20.00
15.00
15.00
150.00
220.00
7
84
25p
25p
14
SPECIAL ACCESSORIES
7206356
42
rear inner flitch panel RH
striker nylon tailgate lower
“Husky” wing badge s/h slight cracks
Good second hand Items
steel bonnet original s/h good lip
requires welding to rear corners
Caledonian door mirror, stainless, plastic perished
1
24
2
50.00
5.00
12.00
1
100.00
2
10.00
Some re-manufactured panels can also be obtained from:
Imp Club Ltd., c/o Bob Allan
e-Mail: spares_at_theimpclub.co.uk
or
Keith Lennox,
Lennox Auto Services, 9 Carrydarragh Road, Moneymore, Co. Londonderry BT45 7YX, Northern
Ireland
e-Mail: keithlennox_at_yahoo.co.uk
Tel: +44 (0)28 8674 8506
or
Ex-Pressed Steel Panels Ltd. c/o Tony Coates
Ickornshaw Mill, Cowling, nr. Keithley, W. Yorks. BD22 0DB
Web: http://www.steelpanels.co.uk
Tel: +44 (0)1535 632721
or
Radford Panel Company Ltd. c/o F.E. Mowatt
1 Blick Road, Heathcote Industrial Estate, Warwick CV34 6TA
Tel: +44 (0)1926 313801
or Malcolm Anderson or Ian Toon who are stockists.
14
Special Accessories
7096074/5
7200497
7100101
71803443
Kits
choke cable-handle MkI conversion
bonnet cable locking with keys
lock tab crank pulley starter dog
w-screen wash-wipe switch electric
1
4
9
1
12.00
15.00
1.00
8.00
14
SPECIAL ACCESSORIES
75243737
GWW102
75066233
L56845
L573645/ 574781
L734
71248335
7200498
1202164
7104302
SBS200
SB514/30
Carpet1
Carpet2
Carpet3
D168
M68990-1
MTR01
MQT1
MB106F
MO106F
MR106F
MS106F
MT106F
replacement for electric pump
w-screen washer plunger kit incl bkt
w-screen washer plunger aluminium, no bkt
electric screen wash motor-pump
relay, 12V 20A
Rearguard fog lamp incl bkt
clock rectangular
lens and gasket aux repeater orange
aux repeater orange assy
spare lens for L555
cig lighter outer and knob only
lamp wire red
lamp wire long green
engine lid lock kit with bkt and keys, Chrysler type
Tudor round plastic washer bottle with brackets and plunger
Wingard round plastic washer bottle with brackets and plunger
Miscellaneous
bolt chrome seat belt
clutch pedal, dual control for driving school
seat belt fitting parts assorted late
hook seat belt for door pillar MkIII
seat belt kit pre-1969 “push to click” (pair)
seat belt retractable (pair)
pipe nylon Smiths oil pressure gauge
plug 1/2 BSP and apapter for Smiths gauge
plug 1/2 BSP for electric oil pressure sender
carpet set (Blenheim range, polypropylene)
carpet set (Wessex range, wool-nylon)
carpet set (Kensington range, wool)
various colours, order from Coverdale Carpets
rear carpet original brown (late)
auxillary switch bkt (for sw + warning light)
switch panel for centre under dash
drill to located switches, meters, etc.
glass replacement bonnet mirror
Desmo 168 bonnet mirror, arm only
Desmo boomerang bonnet mirrors (pair)
Tex chrome door mirror (pair)
torpedo door mirror (pair)
quarter-light mirror (each)
Tex Viewmaster springback B1 140 x90mm rectangular head (pair)
Tex Viewmaster springback O1 125 x65/85mm oval head (pair)
Tex Viewmaster springback R1 115mm round head (pair)
Tex Viewmaster springback S1 110 x70/100mm tarpezium head (pair)
Tex Viewmaster springback T1 110 x70/100mm rectangular head (pair)
43
2
1
5
1
1
1
3
1
1
2
1
1
1
1
1
7.00
6.00
8.00
4.00
10.00
8.00
3.00
6.00
2.00
3.00
1.20
1.20
25.00
15.00
15.00
6
see clutch
6
2
to order
to order
to order
to order
2
ask
ask
ask
2.00
50.00 *
TBA *
14.00
4.00
4.00
94.00 *
153.00 *
198.90 *
1
2
1
20.00
2.00
10.00
1
1
1
to
to
to
to
to
to
to
to
4.00
10.00
50.00
40.00
40.00
18.00
50.00
50.00
50.00
50.00
50.00
order
order
order
order
order
order
order
order
1.50
*
*
*
*
*
*
*
*
15
THE SPECIALIST PANEL
2247083
for convex glass please add £5.00
other stem types available to order
Tex mirror head oval
44
1
5.00
Coloured carpets 10% extra unless priced separately. LHD also available.
15
The Specialist Panel
In addition to our own spares business, the Imp Club Ltd. aims to offer a wide range of advice on
spares and services to owners of Hillman Imps derivatives. In order to do this we have created a
Specialist Panel of professionals who have long experience of working with Imps or supplying parts for
them.
Information on what is available from the Panel will be reviewed from time to time, as will the accumulated information on alternative parts from other cars and parts re-manufactured or requirements
for sourcing. If you know of anyone offering particular services, or yourself wish to feature in this list,
please contact the Spares Coordinator.
The following information is given for each panel member.
To add:
John Rothwell
Colin Foster
Title
Name:
Name
Contact:
Postal address (snail Mail)
Telephone:
Other contact (Tel, Fax, e-Mail, Mobile, Web, ESP, Pidgeon,
etc.)
Description: General area of specialisation, e.g. body panels, engines,
gearboxes, stuff, competition work, etc.
Hours:
Hours during which willing to receive calls. Visit by appointment only (obviously!)
Alpine West Midlands
Name:
Alpine West Midlands Ltd.
Contact:
Sue, Redditch, Worcs.
Telephone:
Tel:
+44 (0)1527 401498; Mobile:
+44 (0)7767
604091; Fax: +44 (0)1527 543494; e-Mail: alpine.
westmids@sunbeam-alpine.co.uk; Web: http://www.
sunbeam-alpine.co.uk
15
THE SPECIALIST PANEL
Description: We offer over 500 separate spares for the Sunbeam Alpine
and Tiger sports cars, in which we specialise, together with
a unique range of repair panels for Rapier, Minx, Gazelle,
Superminx, Vogue, Sceptre and Fastback models. Our range
of spares now covers most of the classic Rootes marque, now
including Imp and Avenger (please call us), and an On line
shopping facility for the purchase of our more popular items,
especially from our comprehensive range of Sunbeam Alpine
and Tiger parts and spares, is available now and is being
expanded. Our on line shopping facility uses SSL technology
– a standard means of sending encrypted data across the
Internet. We can offer a Lead Free Conversion service. A
wide selection of Second Hand Spares is also available.
Hours:
normal working
Malcolm Anderson
Name:
Malcolm Anderson Imp Parts
Contact:
Malcolm Anderson Workshops, Bay House, Main Road,
Norton Fitzwarren, nr. Taunton, Somerset TA2 6QS
Telephone: Tel: +44 (0)1823 350360; Fax: +44 (0)1823 350370;
e-Mail:
malcolmimps@aol.com; Web:
http://www.
malcolmanderson.co.uk
Description: Largest stockist of Imp related spares.
Many remanufactured parts. Any Imp work undertaken. Transaxle
specialist. Breaking many Imps, large new and used parts
in stock, all Imp servicing and MOT preparation. Rally car
preparation. Vast knowledge of technical information! Has
taken on Imp stock and business from Brian Wright (Peugeot Talbot International) and Dave van der Vlist (Dutche
Components).
Hours:
Phone up to 9am-5:30pm monday to friday only please, Fax
or e-Mail 24 hrs
PACRE
Name:
Peter Arnold Classic Race Engines
Contact:
Peter Arnold, Dorchester
Telephone:
Tel: 07425 132678; Mobile: 07811 010474; e-Mail: classic.
racer@yahoo.co.uk; Web: http://www.pacre.co.uk
Description: PACRE will build you a complete engine from Stage 1
through to full on fuel injection race. Peter has built standard, 998cc Race, 1040cc race and 1040cc fuel injected engines, for HSCC series, saloon racing and classic sidecar racing.
Hours:
please contact during normal hours
45
15
THE SPECIALIST PANEL
Clan Club
Name:
Clan Crusader Owners’ Club
Contact:
Jim McEwan, 5 Lascelles Close, Bolbeck Park, Milton
Keynes MK15 8QA
Tel: +44 (0)1908 604286
Telephone:
Description: Large range of spares at competitive prices for both Imp,
Clan Crusader and Irish Clans
Hours:
week nights and weekends before 9pm
CKD
Name:
CKD Boats
Contact:
Roy McBride, 9 Westfort Road, North Shore, Hout Bay,
Cape Town 7800, South Africa
Tel: 021 7903859
Telephone:
Description: Range of services including manufacture of parts and full
vehicle restoration.
Hours:
Did you think it was a boat, Roy?
Cliveyboy
Name:
Cliveyboy
Contact:
Clive Baker, Abingdon, Oxford
Telephone:
e-Mail:
info@cliveyboy.com; Web:
http://www.
cliveyboy.com
Description: Design and manufacture of specialist parts for classic and
race cars. Silicone coolant hoses for the Hillman Imp.
Hours:
Contact via e-Mail above
Competition Classics
Name:
Competition Classics
Contact:
Ian and Mark Toon, 3 The Nook, Easton on the Hill, Stamford, Lincs. PE9 3ND
Tel: +44 (0)1780 756450; no e-mail, no Web
Telephone:
Description: Many Imp and other spares available at competitive prices.
Cars also, especially competition cars. Ask Ian for your
requirements.
Hours:
Corley Conversions
46
15
THE SPECIALIST PANEL
Name:
Corley Conversions
Contact:
Ben Boult, Spring Cottage, Gaydon Road, Bishops Itchington, Warwickshire CV47 2QX
Telephone: Tel-Fax: +44 (0)1926 612432; Mobile: 07885 249847;
e-Mail:
BenBoultHSA@aol.com; Web:
http://www.
corley-conversions.co.uk
Description: Working with Imps since 1962. Ben has taken over all Imp
related work and stock from Chesman Engineering. Many
competition parts have been re-manufactured. Imp preparation and tuning undertaken. Specialist in Imp engines
for road or rally, road and race engine build and rebuilds,
race car preparation, suspension geometry set up, new parts
made to individual specification. Tran-X limited slip diffs
available. GRP panels available. Close ratio gears available
to your requirement.
Hours:
Coverdale Carpets
Name:
Coverdale Carpets
Contact:
Coverdale House, 6 Wetheral Close, Hindley Industrial Estate, Hindley Green, Wigan WN2 4HS
Telephone: Tel: +44 (0)1942 255535; e-Mail: sales@carcarpets.co.
uk; Web: http://www.carcarpets.co.uk
Description: High quality carpet sets in a variety of material and colour.
Imp sets in stock. Send sample or call for prices.
Hours:
normal working
Darrian Cars
Name:
Darrian Cars
Contact:
Tim Duffee, Nantglas, Llangybi, Lampeter, Dyfed, SA48
8NW, Wales
Telephone: Tel-Fax: +44 (0)1570 493247; e-Mail: tim@darrian.co.uk;
Web: htt://www.darrian.co.uk
Description: Building Darrian T9 and T90, supply all Davrian spares and
various Imp special saloon and Jarvis Stiletto body panels,
shells etc. Davrian fabricated arms also suit Imps, 10.25”
disc brake conversions, dual circuit brake pedal boxes, competition advice.
Hours:
any time but after 6pm is recommended
DMP-A Car Parts
Name:
DMP-A Car Parts
47
15
THE SPECIALIST PANEL
Contact:
Telephone:
David Pilpa-Augustyn, 144 South Lotus Avenue, East
Pasadena, 91107 4506, California, USA
Tel: +1 626 584 6957 or +1 818 584 6957
Description: US classic car parts specialists with large range of Imp parts
available
Hours:
East Kent
Name:
East Kent Trim Supplies
Contact:
Richard or Lee. Jubilee Road, Worth, Deal, Kent CT14
0DT
Telephone: Tel: +44 (0)1304 611681 Fax: +44 (0)1304 619936 Web:
http://www.classiccar-trim.com
Description: Large selection of rubber and cloth trimmings, some Imp
parts listed. Full catalogue available (send 4x 1st class
stamps). Contact for information and prices.
Hours:
normal working hours
Ex-Pressed Steel Panels Ltd.
Name:
Ex-Pressed Steel Panels
Contact:
A.G. Coates and L. Coates, Ickornshaw Mill, Cowling, nr.
Keighley, W. Yorks. BD22 0DB
Telephone: Tel: +44 (0)1535 632721; Fax: +44 (0)1535 636977; Web:
http://www.steelpanels.co.uk; e-Mail:
enquiries@
steelpanels.co.uk
Description: Specialist in re-production body panels for old cars, many
in Rootes range. A comprehensive Imp list is available.
Hours:
working hours
FiberClass
Name:
Contact:
FiberClass – That’s how we Roll
Chris Farren, Unit 24, Sindles Farm, Aldsworth, Emsworth
PO10 8QS
Telephone: e-Mail: fiberclass@hotmail.co.uk; Tel: 01489 576728;
Mobile: 07747 367067; Web: http://www.fiberclass.co.uk
Description: For all your glass fibre requirements. Products include Imp
bonnet, engine cover, front and rear wings, rally dash, etc.
Hours:
normal working hours
P.D. Gough
48
15
THE SPECIALIST PANEL
Name:
P.D. Gough
Contact:
Richard or Bob, The Old Foundry, Common Lane, Watnall,
Nottingham NG16 1HD
Telephone: Tel: +44 (0)115 9382241; Fax: +44 (0)115 9459162; Web
http://www.pdgough.com; e-Mail: info@pdgough.com
Description: Specialist in stainless exhaust systems for all cars, type 304
18g and 16g austenitic steel. Full Imp standard and competition range available, life long guarantee.
Hours:
normal working hours, closed friday afternoon and weekends
Higham Auto Services
Name:
Higham Auto Services
Contact:
Richard le Marquand and Dick Tompkins, Northampton
Road Service Station, Rushden, Northamptonshire NN10
6YA
Tel: +44 (0)1933 412230
Telephone:
Description: Vehicle servicing, repairs and MoT preparation, new and
used spares available.
Hours:
any time
Imp Club Ltd.
Name:
Contact:
Imp Club Ltd.
Bob Allan, Shadewood Farm, 283 Chester Road, Grappenhall, Warrington WA4 2QE, UK
Telephone: Tel: +44 (0)1925 267084; Fax: +44 (0)1925 603634;
e-Mail: spares@theimpclub.co.uk; Web: http://www.
theimpclub.co.uk
Description: Working with Imps since 1977. Everything for your Imp!
Re-conditioned brake and clutch components, water pumps
etc. Re-manufactured items such as repair panels, rubber
seals track rods and king pins available in addition to a
large range of original parts when available. General Imp
related technical advice and information. Many new components available including assorted body panels, trim and
sundries. Second hand and new technical books and workshop manuals in stock. Ask for your requirements. Best
prices available!
Hours:
6.00pm to 8.00pm weekdays and anytime (be reasonable!)
weekends – 9.00am to 6.00pm are the best times to try at
weekends
KMC
49
15
THE SPECIALIST PANEL
Name:
KIP Motor Company
Contact:
Kip Motor Company, 2127 Crown Road, Dallas, TX 75229,
USA
Telephone: Toll Free Order Line (US and Canada) (888) 243-0440;
Information and International +1 (972) 243 0440; Web:
http://www.kipmotor.com; Email: info@kipmotor.com
Description: Kip Motor Company specializes in Metropolitan, London
Taxi and other uncommon British ’Orphans’ originally imported to USA but no longer serviced by the original factory
or other major supplier. You can rest assured if you need
parts, manuals, restoration, or repair for your uncommon
British car, Kip Motor Company is the place to call.
Hours:
Working hours
Maynard Motorsport
Name:
Maynard Motorsport Ltd.
Contact:
Mark Maynard, Unit 10, Merretts Mill, Woodchester,
Stroud, Gloucester GL5 5EX
Telephone: Tel: +44 (0)1453 833185; Mobile: 07957 855330; e-Mail:
maynardltd@uwclub.net; Web: http://www.maynardltd.
co.uk
Description: Imp and Peugeot specialist. Blocks and liners machined
998cc, 1040cc, 1120cc, crankshafts re-ground, lead free conversions, new guides supplied and fitted, alloy pulley sets,
Imp engine parts, all engine parts lightened and balanced,
head re-surfacing including machining for Wills rings, gas
flowing and porting. Also, rolling road, tuning and diagnostics, flow bench.
Hours:
work hours
Lennox Auto Services
Name:
Contact:
Lennox Auto Services Ltd.
Keith Lennox, 9 Carrydarragh Road, Moneymore, Co. Londonderry BT45 7YX, N.Ireland
Telephone: Tel: 028 8674 8506; Fax: 028 8674 8580; Mobile: 07850
367963
Description: Imp panels and VIN plates to order. Servicing and 24hr recovery. Specialising in full restoration and re-manufacturing
of Hillman Imp body panels. Special panels can be made on
request.
Hours:
work hours except 24h recovery
Martrim
50
15
THE SPECIALIST PANEL
Name:
Martrim Ltd.
Contact:
Unit 10, Millbuck Way, Springvale Industrial Estate, Sandbach, Cheshire CW11 3HT
Telephone: Tel: +44 (0) 127 0767 771; E-mail: trim@martrim.co.uk;
Web: http://www.martrim.co.uk; Fax: +44 (0) 127 0767
774
Description: Auto upholstery supplier. At Martrim, we have the specialist trimming expertise for the particular challenges involved
with classic car restoration. Not only do we operate and
maintain a full trimming workshop complete with all necessary facilities and tools for classic car restoration, but we
also stock our very own full range of auto interior materials
– making us the trimmer-of-choice for competitive pricing
and quick project turnaround times.
Hours:
Week days 08:00-19:00, saturdays 09:00-12:00
Merlin Motors
Name:
Merlin Motors
Contact:
Vince Frost, Chapel Street, Caerwys, near Mold, Flintshire
CH7 5AE, Wales
Tel-Fax: +44 (0)1352 720280; Home: +44 (0)1352 720617
Telephone:
Description: Mechanical repairs, servicing, MOT test, computer tuning,
body repairs, paint spraying, petrol, tyres. Imp specialist,
engine rebuilds including reboring and competition preparation, transaxle rebuilds, any form of Imp related work, many
spares available both new and second hand, including some
competition parts. General advice – not just Imps (but no
tractors please!).
Hours:
Work number 9.00am to 5.00pm weekdays, 9.00am to
12.00pm saturday
Pear Tree Engineering
Name:
Contact:
Pear Tree Engineering
Jack Knapkin, 1 Thirlmere Road, Golborne, Warrington
WA3 3HH
Telephone: Tel: 01942 715528; e-Mail: info@sparkeroding.co.uk;
Web: http://www.sparkeroding.co.uk
Description: On-site spark eroding, remove broken drills taps and studs.
Ideal for removing broken head bolts from block.
Hours:
Normal working week days.
Radford Panels
51
15
THE SPECIALIST PANEL
Name:
Radford Panels
Contact:
F.E. Mowat, F. Mann, G.F. Mowatt and L. Mowatt, 1 Blick
Road, Heathcote Industrial Estate, Warwick CV34 6TA
Tel: +44 (0)1926 313801
Telephone:
Description: Specialist in re-production body panels for old cars, many
in Rootes range. A comprehensive Imp list is available.
Hours:
Reg Patten
Name:
Patten Engines
Contact:
R.S. Patten, 116 Courtney Crescent, Carshalton, Surrey
SM5 4NB
Telephone: Tel-Fax:
020 8661 0183;
e-Mail:
enquiries@
hillmanimpspecialists.com;
Web:
http://www.
hillmanimpspecialists.co.uk
Description: Classic car and bike engines and transaxles, cylinder head
and competition engine preparation a speciality, many new
engine parts and general second hand spares available
Hours:
9.00am to 5.00pm for enquiries regarding parts and service,
4.00pm to 6.00pm for general help and advice
Reiver
Name:
Reiver Restorations
Contact:
Clark Dawson, Mouldyhills Farm, Canonbie, Dumfriesshire
DG14 0XH, Scotland
Clark Mobile: 07919 207335
Telephone:
Description: Restoring the Past – Maintaining the Future. Professional
personal service, body work specialists, vehicle re-furbishing,
servicing and repairs, MOT preparation, welding - TIG and
MIG, shot blasting, collection and delivery, modern vehicles
also catered for.
Hours:
Contact via ’phone as above normal working days
Revilo89
Name:
Revilo89
Contact:
Adrian Oliver, 9 Lime Grove, Alveston, Bristol BS35 3PN
Telephone:
Tel: +44 (0)1454 412644; e-Mail: adrian.oliver@talktalk.net
Description: Hillman Imp Competition Specialist, over 21 years experience
Hours:
52
15
THE SPECIALIST PANEL
Rodwell Motorsport
Name:
Rodwell Motorsport
Contact:
Stuart Brownsey, 28 Kempston Road, Weymouth, Dorset
DT4 8XB
Telephone: Tel-Fax: +44 (0)1305 775451; Mobile: 07712 002578;
Web:
http://www.rodwellmotorsport.com;
e-Mail
stuart@rodwellmotorsport.com
Description: Machining services to trade and public – 1 off to small batch
production. Wet liner blocks, full race heads, block strengthening kits. modified and billet cam carriers, steel flywheels,
bronze guides, conrod and flywheel lightening, dry sump kit,
Colsidro valve guides and much more!
Hours:
Normal working hours
Scorpion Engineering
Name:
Scorpion Engineering
Contact:
Bob Allan, Shadewood Farm, 30 East View, (back of 283
Chester Road), Grappenhall, Warrington WA4 2QE
Telephone: Tel: +44 (0)1925 267084; e-Mail: spares@theimpclub.co.
uk
Description: Working with Imps since 1977. Restoration of Killeen designed cars especially Imp based Scorpion K19 and Mirage
K18 and Fraser GT K9. If anyone has a K16 I want to
know... General Imp work undertaken. Large range of reconditioned spares available including engines, transaxles,
suspension, brake and clutch components. Lots of second
hand stuff too, let me know what you require. If it’s broken,
I can fix it, or may know someone who can! Parts modified. General Imp related technical advice and information
on Imps and unusual Imp or Climax based cars and fire
pumps
Hours:
6.00pm to 8.00pm weekdays and anytime (be reasonable!)
at weekends – 9.00am to 6.00pm are the best times to try.
Shrigley Engineering
Name:
Shrigley Engineering
Contact:
Andrew Shrigley Jones, Timperley, near Altrincham
Telephone:
Mobile: +44 (0)7738 473930; e-Mail: andyjones_998@
fsmail.net; Web: http://www.shrigleyengineering.
co.uk
53
15
THE SPECIALIST PANEL
Description: Classic and Marine. Specialist in historic race engines. Imp
engine preparation and other precision engineering work undertaken. Machining work, manufacture of bespoke parts,
engine builds, dry sump conversions, etc. – design, machine,
build and test.
Hours:
Normal working week days.
Speedy Spares
Name:
Speedy Spares Services Ltd. (incorporating Grimes of
Coulsden)
Contact:
19-25 Old Shoreham Road, Portslade-by-Sea, Sussex, BN41
1SP
Telephone: Tel: +44 (0)1273 417889; Fax: +44 (0)1273 412764;
Web: http://www.speedyspares.co.uk; e-Mail: sales@
speedyspares.co.uk
Description: Standard parts and accessories for all makes of cars 1935-94.
A list of Imp parts is available on the Web site or by sending
an SAE. Please write or ring with requirements.
Hours:
Monday-friday 9.00am to 5.30pm, saturday 9.00am to
3.30pm, closed wednesday
Standard Radiator Company
Name:
Standard Radiator Company
Contact:
Bob or Will Keeble, Servers Street, Liverpool L6 5HJ
Telephone:
Tel: +44 (0)151 2630400; Mobile: 07739 010935; e-Mail:
standardradiator@btclick.com
Description: All types of body work repair from scratches to structural
damage. Body and chassis jigs. Collection and delivery.
Classic and concourse, including Imps.
Hours:
Normal working week days.
Transimp
Name:
Transimp
Contact:
Dennis Allt, Unit 17 Boxted Farm, Berkhamsted Road,
Hemel Hempstead, Herts. HP1 2SQ
Tel-Fax: +44 (0)1442 217610; Mobile: 07766 868549; e-Mail:
transimp2006@aol.com; Web: http://www.transimp.co.
uk
Telephone:
54
15
THE SPECIALIST PANEL
Description: Transimp was formed in 1998 by Dennis Allt following the
death of Ian Carter. Dennis spent 9 years with Ian and has
now taken over work for many of Ian’s clients. He has specialised in transaxles since 1966 (including close ratio and
five speed conversions) and also reconditions and tunes engines from standard to full race. Rebuilds of Engines and
Transaxles; Lead free conversions; Skim and groove head for
wills rings; Wet liner conversions; Port and throats modified;
Rods lightened and balanced; Rotating assemblies balanced.
Hours:
Valentine
Name:
Colin Valentine
Contact:
Colin Valentine, Hawthorn Farm, Wetherby Road, Rufforth,
York YO23 3QB
Tel: 01904 738708; e-Mail: colinjvalentine@gmail.com
Telephone:
Description: Colin designed and sells disk brake conversion kits based on
the Ford Fiesta and Ford KA. These kits have been professionally tested and a report was published Impressions.
Information available on request.
Hours:
Any time, but be reasonable.
Vanguards
Name:
Vanguards
Contact:
Lledo Collectibles, PO Box 4000, Southampton, SO14 0ZR
Telephone:
Tel: +44 (0)23 8024 8880; Fax: +44 (0)23 8024 8700
Description: Large range of die cast 1:43 scale model cars including a
big selection of Imp variants. Catalogue and order form
available on request.
Hours:
Dave Weedon
Name:
Cotswold Restorations
Contact:
Dave Weedon, Campden Bank, Stratford Road, Weston
Subedge, Chipping Campden, Gloucester GL55 6QG
Tel: +44 (0)1386 840220
Telephone:
Description: Anything to do with repair or manufacture of Clans (including all new body parts), transaxle re-builds with standard
or competition parts, any specification Imp engine rebuild,
large selection of new parts. General repairs to local cars.
Exhaustive knowlege of all Clan Cars and any technical advice on all Imps and Imp based vehicles.
55
15
THE SPECIALIST PANEL
Hours:
10.30am to 9.00pm monday to saturday
56