HOW THE SCIO TECHNOLOGY WORKS
Many have asked what is measured by the SCIO/QXCI medical device. This
incredible advancement in medicine measures subtle electrical factors of the
body. The history of alternative medicine has been dominated by old style
resistance measuring devices. These antique devices depended on the operator
to apply the probe to the acupuncture point. By subtle changing the speed of
probe delivery (not the pressure), the operator could influence the outcome. This
prevented true results. The other complication was the limits of just resistance
testing. The body is much more complicated than just resistance. The electrical
factors of the body include voltage, amperage, capacitance, inductance,
frequency, and many others.
The basics of bio-electrical medicine lie in the voltage, amperage, and
resistance. The only thing that can truly be measured in electricity is the voltage
and amperage. Everything else is a mathematical variation of voltage and
amperage. So the QXCI device starts by measuring multiple channels of this
information. Multiple channels are needed so that we can see variations in the
electrical potential and flow of the body total. So we measure the extremities and
the head. This direct measurement is of four channels of voltage, four of
amperage, and four of resistance. These come into the computer for
amplification and the computer acts as a frequency counter for receiving this
data. This makes an active twelve channel measuring device.
Other calculations are made mathematically. Resistance cannot be measured
directly. It must be calculated from an amperage or voltage meter. Same as that
any capacitance meters cannot directly measure capacitance it must do a
mathematical adjustment of voltage and amperage flow. These calculations are
referred to as virtual or mathematical measures. Thus even the one channel
resistance devices of the antique electro acupuncture devices such as listen
(best), Voll, Phasix, Bicom, Mora and a host of others are virtual measures.
The QXCI device measures over forty virtual dimensions. The variations of
amperage and voltage flow give us a way to measure capacitance and
inductance. These are the reflections of static and magnetic effects of bioelectricity. Variations in amperage and voltage allow us to measure frequency.
You can’t measure a frequency with a resistance meter, so frequency was left
out of the one channel resistance systems of old.
Changes in the voltage, amperage, and resistance together make up the
reactance and susceptance of the electrical system. This is the most important
measure of medication testing. Resistance alone is helpful but when coupled with
voltage and amperage the medication testing is greatly improved. True complete
electrical reactance is the best measure of biological reactance. But multiple
channels are needed to measure total reactivity.
So what is measured by the QXCI? Here are the categories measured:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
Voltage lower left quad
Voltage lower right quad
Voltage upper left quad
Voltage upper right quad
Resistance lower left quad
Resistance lower right quad
Resistance upper left quad
Resistance upper right quad
Amperage head pole 1 Brain wave
Amperage head pole 2 Brain wave
Amperage head pole 3 Brain wave
Amperage head pole 4 Brain wave
Amperage head pole 5 Brain wave
Amperage head pole 6 Brain wave
Amperage head pole 7 Brain wave
Amperage head pole 8 Brain wave
Frequency 1 Lower left quad
Frequency 2 Lower right quad
Frequency 3 Upper right quad
Frequency 4 Upper left quad
Frequency 5 Brain wave
Frequency 6 Brain wave
Frequency 7 Brain wave
Frequency 8 Brain wave
Reactance 1 Changes in volts, amps, Ohms
Reactance 2 Changes in volts, amps, Ohms
Reactance 3 Changes in volts, amps, Ohms
Reactance 4 Changes in volts, amps, Ohms
Reactance 5 Changes in volts, amps, Ohms
Reactance 6 Changes in volts, amps, Ohms
Reactance 7 Changes in volts, amps, Ohms
Reactance 8 Changes in volts, amps, Ohms
Susceptance 1 Inverse of total reactance
Susceptance 2 Inverse of total reactance
Susceptance 3 Inverse of total reactance
Susceptance 4 Inverse of total reactance
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49
50.
51.
52.
53.
54.
55.
Capacitance 1 Changes in amps
Capacitance 2 Changes in amps
Capacitance 3 Changes in amps
Capacitance 4 Changes in amps
Capacitance 5 Changes in amps
Capacitance 6 Changes in amps
Capacitance 7 Changes in amps
Capacitance 8 Changes in amps
Inductance 1 Changes in voltage
Inductance 2 Changes in voltage
Inductance 3 Changes in voltage
Inductance 4 Changes in voltage
Inductance 5 Changes in voltage
Inductance 6 Changes in voltage
Inductance 7 Changes in voltage
Inductance 8 Changes in voltage
Hydration
Oxidation
Proton and Electron pressure
From these calculations several other ramifications can be surmised. The
bioresonance of the system can be measured. The reaction of the body to
nosodes, isodes, allersodes, sarcodes, classic homeopathic, herbals, minerals,
amino acids, enzymes, hormones, bacteria, fungus, parasites, nerves,
vertrabrae, muscles, and thousands of other compounds. The resonance of the
system is measured by determining the evoked potential or reaction of the body
to these compounds.
Evoked potential is the electrical reaction of a patient to a stimulus. By analyzing
the patients evoked potential or change in the above 52 measures we can see
the patterns of the energetic body of the patient.
The speed of this reaction is rather quick. The body electric is drawn towards
nutrition and repelled from toxins. This is discussed in detail in ‘The
Promorpheus’. The speed of reactivity is controlled by the speed of ionic
exchange; this is the speed of change in metabolic reaction. This speed is
approximately one hundredth of a second. The QXCI device is calibrated for
each individual patient.
To measure the 52 factors at biological speeds of one hundredths of a second,
will take a computer. Computer can perform 400 million calculations a sec. So a
computer can easily perform the calculations of or energetic medicine. In just one
test over 65 million bits of data are attained from our patient. The sophistication
of this data and the nature of this fractal and chaos system make it imperative to
use a nonlinear system of analysis. We use a fuzzy number mathematic system
of Fourier form fit as a basis of analysis. Other systems of numerical analysis are
used when needed. The computer can detect energetic aberrations and repair
them automatically. This is like a rectifying circuit in your television. The QXCI
device is a new technology for energetic medicine.
The added benefit is that now the system will perform without conscious
intervention. The users of the antique resistance probe devices can alter the
speed of probe pressure slightly and affect the reading. The doctor and the
patient will not be able to exert conscious influence over the results, because the
QXCI system will not notify what is being tested.
The QXCI system can also perform intricate therapies, such as, electro
acupuncture, rife, Mora, Bicom like, bioresonance, scalar, color therapy, NLP,
etc. The cybernetic link of therapy and diagnosis makes this the QXCI the truly
complete energetic medical system of the future.