Product catalogue
PJSC “ArcelorMittal Kryvyi Rih”
Map of warehouses and sales offices
of PJSC “ArcelorMittal Kryvyi Rih”
ArcelorMittal is a world leading steel &
mining company. ArcelorMittal takes the
leadership in the major steel segments
including automotive industry,
construction and household appliances
and packaging. The Company has large
raw materials deposits and efficient
sales network.
ArcelorMittal Company employs more
than 245 000 employees and has
representative offices in 60 countries of
the world.
ArcelorMittal runs its metallurgical
activities on four continents covering
both the developed and emerging
markets.
Nearly 35% of our steel is manufactured
in America, 47% in Europe and 18%
in other regions including Kazakhstan,
South Africa and Ukraine.
ArcelorMittal is a leader in the steel
markets of North and South America,
West and East Europe, CIS countries and
Africa.
4
5
Reinforcing
steel bars
6
The Company produces the reinforcing rolled steel according to the international and national standards:
DSTU 3760:2006 (Ukraine),
GOST 5781-82 (international standard),
GOST 10884-94 (international standard),
STO ASChM 7-93 (Russian Federation),
GOST Р 52544-2006 (Russian Federation),
STB 1704-2006, 1704-2012 (Belarus),
TU U 27.1-23365425-652:2010,
DIN 488 (Germany),
BS 4449:1997 (Great Britain),
BS 4449:2005 (Great Britain),
ASTM A615 (USA),
ASTM A706 (USA),
STAS 438/1 (Romania),
SI 4466 (Israel),
NT 26.05 (Tunisia),
CAN/CSA-G30.18-M92 (Canada),
ISO 6935 2:2007
Reinforcing steel bars of nominal diameter from 14 to 32 mm can be manufactured with corrosion protection coating that ensures the
marketable state of the reinforcing steel surface up to 90 days.
Bundle and coil sizes
Reinforcing steel bars are manufactured in 6 to 12 m length and with maximum deviation of -0/+100 mm for standard length. Upon
agreement with the customer steel rebar can be manufactured of other length. The bundle weight is up to 5 t.
Steel rebar in coils is produced with weight up to 600 kg and 1100 - 2100 kg.
The products are bound with wire rod of 5.5 to 7.0 mm.
The products are marked with label containing the following data:
- Name and (or) trade mark of the manufacturer;
- Name of the customer;
- Contract/specification number;
- Country of destination;
- Dimension of the steel products (size, length);
- Heat number;
- Batch number;
-Weight.
Note. Content of marking may be changed as per agreement between the customer and manufacturer.
Deformed reinforcing steel can be marked with identification to state the manufacturing company, strength grade etc.
7
DSTU 3760:2006 (Ukraine)
Product mix, standard dimensions and weight
Nominal dimensions
Nominal weight (mass)
per unit of length,
kg/m
Tolerance,
%
*Minimal number of bars
in a bundle, pcs.
5,5
Cross-sectional area
in mm2
23,8
6,0
28,3
0,222
8,0
50,3
0,395
10,0
78,5
0,617
12,0
113,0
0,888
14,0
154,0
1,210
16,0
201,0
1,580
100
18,0
254,0
2,000
79
20,0
314,0
2,470
64
22,0
380,0
2,980
25,0
491,0
3,850
41
28,0
616,0
4,830
32
Diameter, mm
0,187
± 8,0
387
+5,0
-6,0
± 4,5
32,0
804,0
6,310
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, rebar 12.0 m long -0/+100 mm).
255
177
130
53
25
Mechanical properties
Strength grade
Yield strength, σт,
N/mm2
Tensile strength, σв,
N/mm2
Elongation, δ5,
%
minimum
Radius for bend test,
degrees
А240S
240
370
25
180
А400S
400
500
16
90
А500S
500
600
14
90
А800
800
1000
8
45
А1000
1000
1250
7
45
Products delivery:
- nominal dimension of 8.0 to 32.0 mm: cut length (А240S from 10 to 32 mm);
- nominal diameter of 5.5 - 32.0 mm (А240S); 8.0 mm (А400S); 10.0 mm (А400S); 12.0 mm (А400S): in coils of 1100 – 2100
kg;
- nominal diameter of 8.0 mm (А400S, А500S); 10.0 mm (А400S, А500S): in coils of up to 600 kg.
GOST 5781-82 (international standard)
Product mix, standard dimensions and weight
Nominal dimensions
Diameter,
mm
8
Cross-sectional area
in cm2
0,503
Nominal weight (mass)
per unit of length,
kg/m
0,395
Tolerance,
%
+9,0/-7,0
*Minimal number of bars
in a bundle, pcs.
383
10
0,785
0,617
12
1,131
0,888
255
14
1,540
1,210
16
2,010
1,580
101
18
2,540
2,000
80
20
3,140
2,470
64
22
3,800
2,980
25
4,910
3,850
41
28
6,160
4,830
33
177
+5,0/-6,0
+3,0/-5,0
32
8,040
6,310
+3,0/-4,0
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length 12.0 m -0/+100 mm).
8
130
53
25
Mechanical properties
Strength grade
Yield strength, σт,
N/мм2
Tensile strength, σв,
N/мм2
Elongation, δ5,
%
Cold bend, degrees
590
14
90
Tolerance,
%
*Minimal number of bars
in a bundle, pcs.
minimum
А-III(А400)
390
GOST 10884-94 (international standard)
Product mix, standard dimensions and weight
Nominal dimensions
Diameter,
mm
Cross-sectional area
in cm2
Nominal weight (mass)
per unit of length,
kg/m
10
0,785
0,617
12
1,131
0,888
255
+5,0/-6,0
14
1,540
1,210
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length 12.0 m -0/+100 mm).
177
130
Mechanical properties
Strength grade
Yield strength, σт,
N/mm2
Tensile strength, σв,
N/mm2
Elongation, δ5,
%
Radius for bend test,
degrees
minimum
Аt800
800
1000
8
45
Аt1000
1000
1250
7
45
Diameter, mm
Cross-sectional area
in mm2
Nominal weight (mass)
per unit of length,
kg/m
Tolerance,
%
*Minimal number of bars
in a bundle, pcs.
8
50,3
0,395
±8
387
10
78,3
0,617
12
113
0,888
14
154
1,21
130
16
201
1,58
100
18
254
2,00
79
20
314
2,47
64
22
380
2,98
25
491
3,85
41
28
616
4,83
32
STO ASCHM 7-93 (Russia)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
32
804
6,31
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length 12.0 m -0/+100 mm).
255
±5
±4
177
53
25
9
Mechanical properties
Strength grade
Yield strength, σт,
N/mm2
Tensile strength, σв,
N/mm2
Elongation, δ5,
%
Radius for bend test,
degrees
minimum
А400S
400
500
16
А500S
500
600
14
Nominal weight (mass)
per unit of length,
kg/m
Tolerance,
%
*Minimal number of bars
in a bundle, pcs.
0,395
±8
387
160-180
GOST R 52544-2006 (Russia)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
8
Cross-sectional area
in mm2
50,3
10
78,5
0,616
12
131,1
0,888
14
153,9
1,208
130
16
201,1
1,578
100
18
254,5
1,998
79
20
314,2
2,466
64
22
380,1
2,984
25
490,9
3,853
41
28
615,8
4,834
32
Diameter, mm
255
±5
±4
32
804,2
6,313
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length 12.0 m -0/+100 mm).
177
53
25
Mechanical properties
Strength grade
Yield strength, σт,
N/mm2
А500S
500
Tensile strength, σв,
N/mm2
Elongation, δ5,
%
Radius for bend test,
degrees
600
14
90
Nominal weight (mass)
per unit of length,
kg/m
Tolerance,
%
*Minimal number of bars
in a bundle, pcs.
minimum
STB 1704-2006, 1704-2012 (Belarus)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
Diameter,
mm
8
Cross-sectional area
in mm2
50,3
0,395
400
10
78,5
0,617
256
12
113,0
0,888
178
14
154,0
1,208
130
16
201,0
1,578
18
254,5
2,000
20
314,0
2,466
64
22
380,1
2,984
53
25
491,0
3,853
41
28
616,0
4,833
32
32
804,0
6,313
* Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length 12.0 m -0/+100 mm).
10
100
± 4,5
79
25
Mechanical properties
Strength grade
Yield strength, Re,
MPa
Elongation, δ5,
%
Ratio,
Rm / Re
Radius for bend test,
degrees
minimum
S500
500
1,08
14
90
TU U 27.1-23365425-652:2010
Rolled steel for manufacturing the anchoring in the mine working
Product mix, standard dimensions and weight
Nominal dimensions
Diameter,
mm
Cross-sectional area,
mm2
Nominal weight (mass) per unit
of length,
kg/m
20,0
314,0
2,470
22,0
380,0
2,980
Tolerances,
%
± 4,5
25,0
491,0
3,850
*To confirm the technical feasibility the customer has to provide the nut as a reference for geometry (to screw the rolled steel with the
control nut together).
Mechanical properties
Yield point, σт
Tensile strength, σв
Steel grade
Total percentage
elongation at maximum
force, δmax
N/mm2
Percentage elongation after
fracture, δ5
%
minimum
А400sh
400
500
А500sh
500
620
8
20
Threaded rebar
11
DIN 488-2-1984 (Germany)
Product mix, standard dimensions and weight (cut length)
Nominal dimensions
Diameter, mm
Cross-sectional area, cm2
Nominal weight (mass)
per unit of length, kg/m
*8
0,503
0,395
402
10
0,785
0,617
257
12
1,13
0,888
178
14
1,54
1,21
16
2,01
1,58
20
3,14
2,47
64
25
4,91
3,85
41
Tolerances, %
± 4,0
**Minimal number of bars
in a bundle, pcs.
131
100
28
6,16
4,83
32
*Coils of up to 600 kg can be manufactured.
**Upon agreement with the customer, minimal number of bars in the bundle can be ensured (bundle of up to 2 t, cut length of 12.0 m
-0/+100 mm).
Mechanical properties
Strength grade
Ratio,
Rm, N/mm2
Yield strength,
Re, N/mm2
Elongation,
A5, %
Radius for bend test,
degrees
minimum
BSt 500 S
500
550
10
90/20
DIN 488-2-2009 (Germany)
Product mix, standard dimensions and weight(cut lengths)
Weight (mass) per unit of
length, kg/m
Nominal dimensions of steel
Tolerances, %
Diameter, dH, mm
Cross-sectional area, Fн, mm2
nominal
8
50,3
0,395
10
78,5
0,617
12
113
0,888
14
154
1,210
16
201
20
314
2,470
25
491
3,850
28
616
4,830
32
804
6,310
+6,0/-4,0
1,580
Mechanical properties
Steel grade
Yield strength, Re,
N/mm2
Ratio,
Rm / Re
Elongation, Agt, %
Radius for bend test,
degrees
5
90/20
minimum
B500B
12
500
1,08
BS 4449:1997 (Great Britain)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
Diameter, mm
Cross-sectional area,
mm2
Nominal weight (mass)
per unit of length, kg/m
8
50,3
0,395
10
78,5
0,616
12
113,1
0,888
16
201,1
1,579
20
314,2
2,466
25
490,9
3,854
Tolerances, %
*Minimal number of bars
in a bundle, pcs
392
± 6,5
251
178
100
± 4,5
64
41
32
804,2
6,313
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length 12.0 m -0/+100 mm).
25
Mechanical properties
Yield strength, Re,
N/mm2
Steel grade
Ratio,
Rm / Re
Elongation,
A5, %
Total elongation at
maximum force,
Agt, %
Radius for rebend
test,
degrees
minimum
460B
460
1,08
14
5
45/23
BS 4449:2005 (Great Britain)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
Nominal weight (mass)
per unit of length, kg/m
Tolerances, %
*Minimal number of bars
in a bundle, pcs
50,3
0,395
± 6,0
394
10
78,5
0,617
256
12
113,0
0,888
178
16
201,0
1,580
20
314,0
2,470
25
491,0
3,850
Diameter, mm
Cross-sectional area
in mm2
8
± 4,5
100
64
41
32
804,0
6,310
25
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured (bundle of up to 2 t, cut length of 12.0 m
-0/+100 mm).
Mechanical properties
Steel grade
Yield strength,
Re, N/mm2
Ratio,
Rm / Re
Total elongation at
maximum force, Agt, %
B500B
500
1,08
5,0
B500C
500
≥1,15<1,35
7,5
Radius for rebend test,
degrees
90/20
13
ASTM A615-07 (USA)
Product mix, standard dimensions and weight(cut lengths)
Nominal dimensions
Bar designation
Diameter
Cross-sectional area
Mass (weight) per
unit of length
mm
mm2
kg/m
**Minimal number of
bars in a bundle, pcs.
#
№
3*
[10]
9,5
71
0,560
295
4
[13]
12,7
129
0,994
166
5
[16]
15,9
199
1,552
107
6
[19]
19,1
284
2,235
74
7
[22]
22,2
387
3,042
54
8
[25]
25,4
510
3,973
42
9
[29]
28,7
645
5,060
33
10
[32]
32,3
819
6,404
26
*Coils of up to 600 kg can be manufactured.
**Upon agreement with the customer, minimal number of bars in the bundle can be ensured (bundle of up to 2 t, cut length of 12.0 m
-0/+100 mm).
Mechanical properties
Bar designation
Strength grade
Yield strength
Tensile strength
Elongation
pound/inch2
[MPa]
pound/inch2
[MPa]
%
Radius for bend test
degrees
minimum
3
4, 5
Grade 40 [280]
60000
[420]
12
6
12
3, 4, 5, 6
9
7, 8
9, 10
14
11
40000
[300]
Grade 60 [420]
60000
[420]
90000
[620]
8
7
180
STAS 438/1-89 (Romania)
Product mix, standard dimensions and weight
Nominal dimensions
Tolerances, mm
Diameter, mm
ОВ 37
РС 52
± 0,3
-
6
Cross-sectional area,
cm2
Mass (weight) per
unit of length,
kg/m
* Minimal number of
bars in a bundle, pcs
0,283
0,222
-
0,385
0,302
-
0,503
0,395
387
0,785
0,617
248
1,130
0,888
177
1,540
1,210
130
2,010
1,580
99
18
2,540
1,990
79
20
3,140
2,470
63
3,800
2,984
52
4,910
3,850
40
4,840
32
6,310
24
7
8
10
+ 0,30
- 0,50
12
14
+ 0,3
- 0,5
16
+ 0,40
- 0,50
22
25
+ 0,5
- 0,8
28
6,160
+ 0,40
- 0,75
32
8,040
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length 12.0 m -0/+100 mm).
Mechanical properties
Steel grade
Nominal diameter,
mm
Yield strength, Re,
N/mm2
Tensile strength,
Rm, N/mm2
Elongation,
A5, %
Radius for bend test,
degrees
minimum
ОВ 37
РС 52
6-12
255
14-32
235
14
355
16-28
345
360
25
180
510
20
32
335
Note: reinforcing steel bars РС 52 of 8, 10 and 12 mm can be manufactured in coils.
SI 4466-3-1993 (Israel)
Product mix, standard dimensions and weight (cut lengths)
Nominal diameter, mm
Nominal weight (mass) per unit
of length, kg/m
8
0,395
10
0,617
12
0,888
179
14
1,21
131
16
1,58
101
18
2,00
20
2,47
22
2,98
25
3,85
41
28
4,83
33
Tolerances, %
+ 4,5
- 2,5
+ 3,5
- 2,5
*Minimal number of bars in a
bundle, pcs
400
256
79
64
53
32
6,31
25
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured (bundle up to 2 t, bar length 12.0 mm
-0/+100 mm).
15
Mechanical properties
Elongation,
εsk, %
Tensile strength,
ftk, MPa
Yield strength, f yk,
MPa
Grade
Ratio,
ftk/ fyk
Radius for rebend
test,
degrees
1,25
90/20
minimum
S 400
400-520
500
12
NT 26.05 (1983) (Tunisia)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
Nominal weight (mass) per unit
of length, kg/m
*Minimal number of bars in a
bundle, pcs
50,3
0,395
389
10
78,5
0,617
256
12
113
0,888
178
14
154
1,208
130
16
201
1,578
100
20
314
2,466
64
25
491
3,854
41
Diameter,
mm
Cross-sectional area,
mm2
8
32
804
6,313
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length 12.0 m -0/+100 mm
25
Mechanical properties (grade 40)
Nominal diameter,
mm
Tensile strength,
Rm, N/mm2
Yield strength, Re, N/mm2
Elongation,
A5, %
Radius for bend test,
degrees
minimum
≤ 20
410
> 20
390
490
14
180
CAN/CSA-G30.18-M92 (Canada)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
Diameter, mm
Cross-sectional area
in mm2
Weight (mass)
per unit of
length, kg/m
10
11,3
100
0,785
201
15
16,0
200
1,570
100
20
19,5
300
2,355
25
25,2
500
3,925
40
30
29,9
700
5,495
*Upon agreement with the customer, minimal number of bars in the bundle can be ensured
(bundle up to 2 t, bar length of 12.0 . -0/+100 mm).
28
Bar designation
Tolerances,
%
-6
*Minimal number of
bars in a bundle, pcs
67
Mechanical properties (grade 400W)
Bar designation
Yield strength,
MPa
Tensile strength,
MPa
Ratio of tensile
strength to yield
strength
Elongation, %
Radius for bend test,
degrees
minimum
10, 15,
20, 25
30
16
400-525
540
1,15
13
12
180
ISO 6935 2:2007
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
of the bar
Mass (weight) of 1 running meter of the bar (linear
density), kg/m
Tolerances,
(close), %
*Minimal number of
bars in a bundle, pcs
±7,5
420
Diameter,
dн, mm
Cross-sectional
area, in mm2
Nominal
Minimum
Maximum
8
50,3
0,395
0,365
0,425
10
78,5
0,617
0,583
0,651
12
113
0,888
0,839
0,937
14
154
1,21
1,156
1,264
16
201
1,58
1,509
1,651
20
314
2,47
2,359
2,581
20
25
491
3,85
3,715
3,985
25
±5,5
270
190
14
±4,5
16
±3,5
28
616
4,84
4,671
5,009
32
32
804
6,31
6,089
6,531
*Minimal number of bars in the bundle can be ensured (bundle of up to 2 t, cut length of the bar is 12.0 m -0/+100 mm).
28
Mechanical properties
Ration of ultimate
Elongation after fracture,
strength to yield strength,
(АS), %
Rm/Rе
Elongation at maximum
force (Agt), %
Class (grade, category)
Yield strength,
(Rе), MPa,
1
2
3
4
5
B500BWR
500
1,08
14
5,0
In limits or minimum
17
Wire rod
18
Commercial-quality carbon steel wire rod
DSTU 2770-94 (GOST 30136-95)
Carbon steel wire rod for wire drawing
ASTM А 510М
Carbon steel wire rod of round section
SOU MPP 77.140-236:2008
Steel wire rod of rope grade
DSTU 3683-98
Low-alloy and alloy steel wire rod for welding wire drawing
TU 14-15-345-94, TU 14-15-346-94, TU U 27.1-4-5482003, TU U 27.1-24432974-020:2010
Technical parameters of the wire rod
Diameter of wire rod,
mm
Mass, kg
Height, mm
Outer diameter,
mm
5,5-14,0
1100 - 2100
max 1750
max 1250
5,5-8,0
up to 600
max 400
max 1450
Inner diameter,
mm
min 750
Packaging:
Coils of mass up to 600 kg are bound with wire rod of 5.5, 6.5, 8.0 mm in two points. Additional binding with strip is possible in two points.
Coils with mass up to 1100-2100 kg have 4 radial bindings and 1 transversal binding of wire rod of 5.5-7.0 mm.
Marking:
Each coil is marked with two labels indicating the following:
• name and (or) trade mark of the manufacturer;
• steel grade;
• heat and lot numbers;
• dimension (diameter);
• mass, kg (for coils with mass to 1100-2100 kg);
• country of destination.
COMMERCIAL-QUALITY CARBON STEEL WIRE ROD
DSTU 2770-94 (GOST 30136-95)
Limit deviation:
- for diameter +0.3/- 0.5 mm;
- for out-of-roundness max. 50% of the limit deviations sum.
Reference chemical composition
Mass content of elements, %
Steel grade
C
Mn
S
Si
P
Cr
Ni
Cu
0,03
0,03
max
St1kp
0,06-0,12
0,25-0,50
max 0,05
*St1ps
0,06-0,12
0,25-0,50
0,05-0,15
St2kp
0,09-0,15
0,25-0,50
max 0,05
*St2ps
0,09-0,15
0,25-0,50
0,05-0,15
St3kp
0,14-0,22
0,30-0,60
max 0,05
0,05
0,04
0,03
*St3ps
0,14-0,22
0,40-0,65
0,05-0,15
The manufacturer guarantees drawing to 2.6 mm from wire rod ØØ 5.5-6.5 mm.
* Products can be manufactured of continuous cast billets.
Mechanical properties
Reduction of area,
%, min
Tensile strength, N/mm2, max
Steel grade
St1kp
Diameter, mm / weight of coil, kg
Diameter, mm / weight of coil, kg
5,5-8,0 / max 600
5,5-14,0/1100-2100
5,5-8,0 / max 600
5,5-14,0/1100-2100
420
470
68
66
St1ps
420
470
68
66
St2kp
420
470
60
60
St2ps
420
470
60
60
St3kp
490
540
60
60
St3ps
490
540
60
60
19
CARBON STEEL WIRE ROD FOR WIRE DRAWING
ASTM А 510М
CARBON STEEL WIRE ROD OF ROUND SECTION
SOU МPP 77.140-236:2008
Limit deviation:
- for diameter ± 0.4 mm;
- for out-of-roundness max. 0.60 mm.
Reference chemical composition
Mass content of elements, %
Steel grade
C
Mn
Si
*SAE1006
max 0,08
0,25-0,45
*
S max
P max
Cr max
Ni max
Cu max
*SAE1008
max 0,10
0,30-0,50
*
*SAE1010
0,08-0,13
0,30-0,60
*
*SAE1012
0,10-0,15
0,30-0,60
*
SAE1013
0,11-0,16
0,50-0,80
*
SAE1015
0,13-0,18
0,30-0,60
*
SAE1016
0,13-0,18
0,60-0,90
*
SAE1017
0,15-0,20
0,30-0,60
*
0,05
0,04
0,15
0,15
0,3
*SAE1018
0,15-0,20
0,60-0,90
*
SAE1019
0,15-0,20
0,70-0,1
*
SAE1020
0,18-0,23
0,30-0,60
*
SAE1021
0,18-0,23
0,60-0,90
*
SAE1022
0,18-0,23
0,70-1,0
*
-
-
-
SAE1023
0,20-0,25
0,30-0,60
*
Si content is defined upon agreement with the customer.
The manufacturer guarantees drawing to 2.6 mm from wire rod ØØ 5.5-6.5 mm made of SAE1006 and SAE1008.
* Products can be manufactured of continuous cast billets.
-
Mechanical properties (with Si content of 0,05% max)
Tensile strength, N/mm2, max
Steel grade
Diameter, mm / weight of coil, kg
5,5-8,0 / max 600
5,5-14,0/1100-2100
Reduction of area, %, min
Diameter, mm / weight of coil, kg
5,5-8,0 / max 600
5,5-14,0/1100-2100
SAE1006
400
420
23
22
SAE1008
410
430
22
22
SAE1010
430
450
21
21
SAE1012
440
460
20
20
SAE1013
-
470
-
19
SAE1015
-
490
-
18
SAE1016
-
500
-
17
SAE1017
-
510
-
17
SAE1018
-
520
-
17
SAE1020
-
530
-
16
SAE1022
-
540
-
16
SAE1023
550
16
Upon agreement with the customer wire rod can be manufactured with other chemical composition and mechanical properties.
20
STEEL WIRE ROD FOR ROPES
DSTU 3683-98 and similar products as per ASTM А 510М
Limit deviation:
- for diameter +0.3/- 0.5 mm;
- for out-of-roundness max. 50% of the limit deviations sum.
Reference chemical composition
DSTU3683-98
Steel
grade
С
Mn
Si
S
Mass content of elements, %
P
S+P
Cr
Ni
Cu
N
As
0,1
0,1
0,1
0,1
0,1
0,15
0,15
0,15
0,15
0,15
0,008
0,008
0,008
0,008
0,008
0,08
0,08
0,08
0,08
0,08
max
50
0,47-0,55 0,40-0,70 0,25-0,45
0,03
0,03
0,055
0,1
55
0,52-0,60 0,40-0,70 0,25-0,45
0,03
0,03
0,055
0,1
60
0,57-0,65 0,40-0,70 0,25-0,45
0,03
0,03
0,055
0,1
65
0,62-0,70 0,40-0,70 0,25-0,45
0,03
0,03
0,055
0,1
*70
0,67-0,75 0,40-0,70 0,25-0,45
0,03
0,03
0,055
0,1
*Products can be manufactured of continuous cast billets (with Si content of 0.17-0.25).
ASTM А 510М
Steel grade
Mass content of elements, %
С
Mn
Si
S
P
SAE1055
0,50-0,60
0,60-0,90
*
0,05
0,04
SAE1060
0,55-0,65
0,60-0,90
*
0,05
0,04
SAE1065
0,60-0,70
0,60-0,90
*
0,05
0,04
0,05
0,04
*SAE1070
0,65-0,75
0,60-0,90
*
Si content is defined upon agreement with the customer within the range:
max 0,05 %
max 0,10 %
0.10 – 0.20 %
0.15 – 0.35 %
Values of the mechanical properties are to be agreed with the customer.
* Products can be manufactured of continuous cast billets (with Si content of 0.17-0.25).
21
LOW-ALLOY AND ALLOY STEEL WIRE ROD FOR MANUAFCTRUING OF THE WELDING WIRE
ТU 14-15-345-94, ТU 14-15-346-94, TU U 27.1-4-548-2003,
TU U 27.1-24432974-020:2010
Limit deviation:
- for diameter +0.3/- 0.5 mm;
- for out-of-roundness max. 50% of the limit deviations sum.
Reference chemical composition
Mass content of elements, %
Steel grade
Si
S
P
Ni
Cu
Al
0,04
Cr
max
0,15
0,35-0,60
0,03
0,04
0,3
0,25
0,01
-
max 0,1
0,35-0,60
0,03
0,03
0,03
0,12
0,25
0,25
0,01
-
0,09
1,0-1,50
0,20-0,45
0,015
0,02
0,3
0,5-0,7
0,25
0,05
-
*Sv08G2S
0,05-0,11 1,80-2,10 0,70-0,95
0,025
0,03
0,2
0,25
0,25
Sv08G2SC
0,05-0,12 1,60-2,10
0,70-1,0
0,025
0,03
0,2
0,25
0,06
0,025
0,03
0,1
0,25
0,025
0,75–
1,15
С
Mn
Sv08
max 0,1
Sv08А
Sv08G1NМА
Sv08GА
Sv-07HМ
max 0,1
0,05–0,09
0,80-1,10
0,30–0,55 0,12–0,40
Sv-07G
0,70-1,00
Sv-09HМ
0,07-0,11 0,35-0,65 0,12-0,35
0,030
0,06
0,030
0,025
0,05
0,1
0,25
-
-
0,30
0,25
-
-
0,10
0,25
0,25
-
-
0,20
0,90–
1,25
0,25
-
-
Mechanical properties
Steel grade
Tensile strength, N/mm2, minimum
Reduction of area, % minimum
Sv08
420
60
Sv08А
420
60
Sv08G1НМА
850
48
Sv08G2S
690
48
Sv08G2SC
850
48
735
48
Sv08GА
Sv-07G
Sv-09HМ
22
-
-
0,25
* Products can be manufactured of continuous cast billets.
Sv-07HМ
Zr
Rolled steel bars
and sections
23
HOT-ROLLED FLAT STEEL BARS
DSTU 4747:2007/GOST 103-2006
Limit deviation:
- by the flat bar width:
20 to 60 mm +0.5/-1.0 mm;
63 mm +0.5/-1.3 mm;
70-75 mm +0.5/-1.4 mm;
- by the flat bar thickness: 4 to 6 mm +0.3/-0.5 mm at width of 11 to 60 mm;
6 to 16 mm +0.2/-0.5 mm at width of 63, 65 mm.
Product mix and standard dimensions
Thickness (height), mm
Width, mm
4
5
+
+
25
+
+
+
30
+
+
+
+
+
20
22
6
7
8
10
+
+
+
+
+
12
+
32
35
+
40
+
+
+
45
+
+
+
+
50
+
+
+
+
+
60
+
+
+
+
+
+
+
63
+
65
+
70
+
+
+
75
+
* Upon agreement with the customer other thickness of the flat bar is possible.
Mechanical properties (DSTU 4484:2005/GOST 535-2005)
Steel grade
Ultimate tensile
strength, N/mm2,
minimum
Yield strength, N/
mm2, minimum
Percentage elongation,
%, minimum
Cold bend test at
180°
Impact strength
26
+
+
St3ps
370
245
Packaging: in bundles up to 5 t, length of 6 to 12mм (0/+100 mm).
HOT-ROLLED SQUARE STEEL BARS
DSTU 4746:2007/GOST 2591-2006
Product mix and standard dimensions
Dimension, mm
Limit deviation, mm
Bar straightness tolerance, %, max
10х10
12х12
+0,3
-0,5
14х14
0,5 % of the length
16х16
20х20
+04
-0,5
22х22
Mechanical properties (DSTU 4484:2005/GOST 535-2005
Steel grade
Ultimate tensile
strength, N/mm2,
minimum
Yield strength,
N/mm2, minimum
Percentage
elongation, %,
minimum
Cold bend test at
180°
Impact strength
St3ps
370
245
26
+
+
Packaging: in bundles up to 5 t, length of up to 12 m (0/+100 mm)
24
HOT-ROLLED STEEL BARS (ANGLE STEEL WITH EQUAL LEGS)
DSTU 2251-93 (GOST 8509-93)
Product mix and standard dimensions
Leg thickness, mm
Dimension,
mm
2,5
3
4
20х20
+
25х25
+
30х30
+
32х32
+
+
35х35
+
+
40х40
+
+
45х45
By leg width
By leg
thickness
Out-ofstraightness
of angle steel
bar,
% per m
+1
-1
+0,3
-0,4
0.4% of the
length
Limit deviation, mm
5
6
+
50х50
+
Mechanical properties (DSTU 4484:2005/GOST 535-2005)
Steel grade
Ultimate tensile
strength, N/mm2,
minimum
Yield strength,
N/mm2, minimum
Percentage
elongation, %,
minimum
Cold bend test at
180°
Impact strength
St3ps
St5ps
370
490
245
285
26
20
+
+
+
+
Packaging:
- fish-bone packing - in bundles up to 5 t, 6 to 12 m (+100 mm).
Angle ‘‘fishbone’’ packing machine
25
HOT-ROLLED ROUND STEEL BARS
DSTU 4738:2007/GOST 2590-2006
Product mix and standard dimensions
Diameter, mm
Limit deviation, mm
5,5-19
+0,3
-0,5
20-25
+0,4
-0,5
26-29
+0,3
-0,7
30-32
+0,4
-0,7
Bar straightness tolerance, %, max
0.5% of the length
Mechanical properties (DSTU 4484:2005/GOST 535-2005)
Steel grade
Ultimate tensile
strength, N/mm2,
minimum
Yield strength, N/
mm2, minimum
Percentage
elongation, %,
minimum
Cold bend test at
180°
Impact strength
St3kp
360
235
27
+
+
St3ps
370
245
26
+
+
20
+
+
St5ps
490
285
Packaging:
- ØØ 10-32 mm – in bundles up to 5 t, 6 to 12 m long (-100/+100 mm);
- ØØ 5.5-14 mm – in coils of 1100-2100 kg.
- ØØ 14-32 mm - in coils of 1100-2100 kg.
STRUCTURAL NOT-ALLOYED AND ALLOYED ROLLED STEEL FOR COLD HEADING AND COLD EXTRUSION
DSTU 3684-98
Product mix and standard dimensions
Diameter, mm
Limit deviation, mm
5,5-19
+0,3
-0,5
20-25
+0,4
-0,5
26-29
+0,3
-0,7
30-32
+0,4
-0,7
Bar straightness tolerance, %, max
0,5% of the length
Reference chemical composition
DSTU 3684-98
Mass content of elements and limit deviations in the chemical composition, %
Steel grade
26
Cr
С
Mn
Si
08kp
0,05-0,12
0,25-0,50
max 0,03
0,1
10kp
0,07-0,14
0,25-0,50
max 0,03
0,25
15kp
0,12-0,19
0,25-0,50
max 0,07
0,25
20kp
0,17-0,24
0,25-0,50
max 0,07
0,25
20Х
0,17-0,23
0,35-0,60
0,17-0,30
0,7-1,0
S
P
maximum
0,035
0,035
Mass content of elements and limit deviations in the chemical composition, %
Steel grade
С
Mn
Si
Cr
S
P
maximum
30Х
0,24-0,32
0,35-0,60
0,17-0,30
0,8-1,1*
35Х
0,31-0,39
0,50-0,80
0,17-0,30
0,8-1,1*
40Х
0,36-0,44
0,50-0,80
0,17-0,30
0,8-1,1*
As rolled
+0,01
-0,01
+0,02
-0,02
up to 0,1 ± 0,01
from 0,1 to1.0
± 0,01
+0,02
-0,02
0,035
0,035
0,005
+0,005
*Note: with chromium content above 1% deviation of +0.05% is permissible.
Packaging:
- ØØ 5.5-14 mm – in coils of 1100-2100 kg.
- ØØ 14-32 mm - in coils of 1100-2100 kg.
STRUCTURAL CARBON STEEL ROLLED BARS, CALIBRATED WITH SPECIAL SURFACE FINISH
GOST 1050-88
Product mix and standard dimensions
Diameter, mm
Limit deviation, mm
%, max
+0,3
-0,5
20-25
+0,4
-0,5
26-29
+0,3
-0,7
30-32
+0,4
-0,7
Bar straightness tolerance, %, max
0.5% of the length
Reference chemical composition
GOST 1050-88
Mass content of elements and limit deviations in the chemical composition, %
Steel grade
С
Mn
Si
1
2
3
4
10
0,07-0,14
0,35-0,65
15
0,12-0,19
0,35-0,65
20
0,17-0,24
0,35-0,65
25
0,22-0,30
0,50-0,80
30
0,27-0,35
0,50-0,80
35
0,32-0,40
0,50-0,80
40
0,37-0,45
0,50-0,80
45
0,42-0,50
0,50-0,80
50
0,47-0,55
0,50-0,80
55
0,52-0,60
0,50-0,80
As rolled
+0,01
-0,01
+0,03
-0,03
Cr
S
P
maximum
5
6
7
0,040
0,035
0,15
0,17-0,37
+0,02
-0,02
0,25
+0,005
Packaging:
- ØØ 5.5-14 mm – in coils of 1100-2100 kg.
- ØØ 14-32 mm - in coils of 1100-2100 kg.
27
CARBON AND ALLOY SPRING ROLLED STEEL
GOST 14959-79
Product mix and standard dimensions
Diameter, mm
Limit deviation, mm
5,5-19,0
+0,3
-0,5
20,0-23,0
+0,4
-0,5
Reference chemical composition
Mass content of chemical elements, %
Steel grade
Cr
S
Ni
Cu
N2
0,035
0,25
0,20
0,008
0,035
0,035
0,25
0,20
0,008
0,30
0,025
0,025
0,25
0,20
0,008
± 0,02
-
+ 0,005
-
-
-
С
Mn
Si
60S2G
0,55-0,65
0,7-1,0
1,8-2,2
0,30
0,035
55S2
0,52-0,60
0,6-0,9
1,5-2,0
0,30
60S2А
0,58-0,63
0,6-0,9
1,6-2,0
P
Maximum
Deviation
± 0,01
± 0,02
± 0,05
*Deviations are applied to steel of grade 60S2А
Mechanical properties
Steel grade
Ultimate tensile strength,
N/mm2, minimum
Yield strength, N/mm2,
minimum
Percentage elongation, %,
minimum
Reduction of area, %
minimum
60S2G
1470
1325
6
25
55S2
1270
1175
6
30
60S2А
1570
1375
6
20
Packaging: coils of 1100-2100 kg.
HOT ROLLED STEEL OF STEEL GRADE 43 IN COILS
TU U 27.1-4-586-2004
Product mix and standard dimensions
Diameter, mm
Limit deviation, mm
14-19,0
+0,3
-0,5
20,0-23,0
+0,4
-0,5
Reference chemical composition
Mass content of chemical elements, %
Steel grade
С
Mn
Si
0,400,5-0,8
0,17-0,37
0,45
*Production from continuous cast billets mashine is possible
Packaging: coils of 1100-2100 kg.
*43
28
Cr
S
P
Ni
Cu
0,25
0,030
Maximum
0,25
0,035
0,035
Billets
29
HOT-ROLLED SQUARE STEEL BILLETS
TU U 27.1-00190319-1307-2003
Product mix: 125х125, 130х130, 150х150
Nominal dimensions and estimated mass of one running meter
Dimension, mm
Limit deviation
along square side,
mm
Difference
between the
length of the
diagonals, mm
Mass of one
running meter, kg
150х150
± 5,0
7,0
173,65
130х130
± 5,0
7,0
129,69
125х125
± 4,0
5,6
120,47
Cutting angle
max, mm
Billet straightness
tolerance, max, %
of length
Billet twist, max,
degrees
8,0
1,5
18,0
Reference chemical composition
Mass content of elements, %
Steel grade
S
P
0,05-0,15
0,05
0,04
С
Mn
Si
St3ps
0,14-0,22
0,40-0,65
Cr
Ni
Cu
0,3
0,3
0,3
max
St5ps
0,28-0,37
0,50-0,80
0,05-0,15
0,05
0,04
0,3
0,3
0,3
St3Gps
0,14-0,22
0,80-1,10
0,05-0,15
0,05
0,04
0,3
0,3
0,3
St5Gps
0,22-0,30
0,80-1,20
0,05-0,15
0,05
0,04
0,3
0,3
0,3
SAE1006
max 0,08
0,25-0,40
*
0,05
0,04
0,15
0,15
0,3
SAE1008
max 0,10
0,30-0,50
*
0,05
0,04
0,15
0,15
0,3
* Si content is defined in range:
max 0,05%
max 0,10%
0,10-0,20%
0,15-0,35%
Upon the agreement with the customer the chemical composition can be adjusted as well as the billets can be manufactured of other steel
grades.
Packaging: in bulk, up to 12 000 mm long (+0/200).
Upon the agreement with the customer the packaging in bundle is possible.
Marking: by stamping the billet face.
30
CAST BILLETS
(as per contractual requirements)
Product mix: 150х150
Nominal dimensions and estimated mass of one running meter
Dimension, mm
Limit deviation
along the square
side, mm
Difference
between the
length of the
diagonals, mm
Mass of one
running meter, kg
Corner radius,
max, mm
Billet straightness
tolerance,
max, mm
Billet twist,
max, degrees
150х150
± 5,0
7,0
177,44
8,0
70
18,0
Reference chemical composition
Mass content of elements, %
Steel grade
С
Mn
Si
S
P
Cr
Ni
Cu
max
St3ps
0,14-0,22
0,40-0,65
10 max
0,05
0,04
0,3
0,3
0,3
SAE1006
max 0,08
0,25-0,40
0,04
0,15
0,15
0,3
max 0,10
0,30-0,50
10 max
10 max
0,05
SAE1008
0,05
0,04
0,15
0,15
0,3
SAE1010
10 max
0,08-0,13
0,30-0,60
0,05
0,04
0,15
0,15
0,3
SAE1018
10 max
0,15-0,20
0,60-0,90
0,05
0,04
0,15
0,15
0,3
Upon the agreement with the customer the chemical composition can be adjusted as well as the billets can be manufactured of other steel
grades.
Packaging: in bulk, up to 11700 mm long (±100).
Upon the agreement with the customer the packaging in bundle is possible.
Marking: by stamping the billet face.
31
Quality
All products of PJSC ArcelorMittal Kryvyi Rih are certified, safe and environmentally
friendly as they are manufactured in strict compliance with requirements in the
standards and construction regulations of Ukraine and other countries. They comply
with all health standards and radiation safety criteria established in Ukraine.
Radiation is controlled at each steel heat (cast) daily. The results thereof are recorded in
the test certificates.
UK Certification Authority for Reinforcing Steels
Certificate of Approval
Quality Management System Certification
This is to certify that
ArcelorMittal Kryviy Rih PJSC
at its establishment at
Kryviy Rih, Ukraine
has satisfied the Authority that it operates a Quality Management System that complies with the requirements of
BS EN ISO 9001 2008
Production of ingot cast and rolled steel billets
Production of hot rolled steel bar for the reinforcement of concrete
using the processes and procedures registered with the Authority.
This Certificate is the property of the Authority and is issued subject to the Regulations of the Authority.
The Certificate Number is:
Issue Date:
1137
01-January-2013
Signed on behalf of the Board of Management
Testing Center of the Company
Executive Director
The use of the Accreditation Mark indicates accreditation in respect
of those activities covered by the accreditation certificate number 002.
32
UK Certification Authority for Reinforcing Steels
Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK. www.ukcares.com
Cert. Ref: AllC112010
441 285
Expiry Date:
31-December-2013
Contacts
Europe
Region
Countries
Kryvy Rih
Central region
Ukraine
East region
West region
Azerbaijan
CIS
Armenia, Belarus,
Georgia, Moldova,
Kazakhstan, Tajikistan,
Turkmenistan, Uzbekistan
Moscow region
Russia
South region
Europe
Europe
Contacts
Ekaterina Ivanchenko
T+3 8 056 499 31 05
M+38 067 257 98 80
Ekaterina.Ivanchenko@arcelormittal.com.
Orzhonikidze str. 1, Kryvyi Rih, Ukraine 50095
Yevhen Chumachenko
T/F +38 044 321 0 321 EXT 82033
M+38 067 638 10 26
Yevhen.Chumachenko@arcelormittal.com
Vitaliy Kondratov
Т +38 044 321 0 321 EXT 82039
M+38 067 504 50 28
Vitaliy.Kondratov@arcelormittal.com
Irina Vlasenko
T/F +38 044 321 03 21 EXT 82052
M +38 067 522 71 54
F +3 80 56 409 04 76
Irina.Vlasenko2@arcelormittal.com
20, Velyka Zhytomyrska str., Business-center «Panorama», 8th floor, Kiev, Ukraine
Vyacheslav Sharshavyy
M+38 067 628 45 93
Vyacheslav.Sharshavyy@arcelormittal.com
Lviv, Ukraine
Anton Redko
M +38 067 621 43 12
Anton.Redko@arcelormittal.com
Donetsk, Ukraine
Ali Alibeyli
T +99 412 464 4144
T/F +99 412 464 4143
M +99 450 380 6528
Int.M +37 25 726 80 50
Ali.Alibeyli@arcelormittal.com
AGA Center 13th floor Office # 13/5, Khojali Avn. 55 Baku, Azerbaijan
Oleg Kozak
M+38 067 627 10 85
T +38 044 321 0 321 EXT 82054
F +38 044 321 32 53
Oleg.Kozak@arcelormittal.com
20, Velyka Zhytomyrska str., Business-center «Panorama», 8th floor, Kiev, Ukraine
Dmitry Starikov
T +7 495 775 90 19
M+7 916 233 26 50
dmitry.starikov@arcelormittal.com
Pavel Ilin
T +7 495 775 90 48
F +7 495 721 15 55
M +7 916 233 27 62
pavel.ilin@arcelormittal.com
Vadim Drozdov
T +7 916 233 24 98
M +7 495 961 32 20
vadim.drozdov@arcelormittal.com
Bolshaya Ordynka str. 44, building 4 , office 1, Moscow, Russia
Alexander Hudomyasov
T +7 917 331 02 08
Alexander.Hudomyasov@arcelormittal.com
Krasnodar, Russia
Christian Lindblom
T +358 20 743 0940/43
M +358 40 8445 838
F +358 20 743 0941
Christian.Lindblom@arcelormittal.com
Veistämönaukio 1-3, World Trade Center, 20100 Turku, Finland
33
Asia
Egypt
Jordan, Lebanon, Syria,
Iraq
Near East
Turkey
Israel
Middle East
Bahrain, Kuwait, Oman,
Qatar, Saudi Arabia,
Yemen, United Arab
Emirates and Afghanistan
India
India, Bhutan, Maldives,
Nepal, Bangladesh,
Sri Lanka, Pakistan
China
China
South East
Asia
Brunei, Laos, Cambodia,
East Timor,
Indonesia, Malaysia,
Philippines, Singapore,
South Korea, Thailand,
Vietnam
34
Omar Elias
T + 20 2240 2 2467
M + 20 1000 090 212
F +20 2240 2 2457
omar.elias@arcelormittal.com
9th floor, Apt . 92 - Building #14 Hadaek El Oubour, Salah Salem St. Heliopolis 11671,
Cairo, Egypt
Khalil Zameli
T +961 1 99 19 46
M +961 76 68 24 68
F +961-1-99 19 47
khalil.zameli@arcelormittal.com
Riad Al Solh, Stephan Building, 3rd Floor, Office 3D, Beirut, Lebanon
Isil Yigitoglu
T +90 212 317 49 00
T+90 212 317 49 46
F+90 212 283 76 67
M +90 533 950 73 08
isil.yigitoglu@arcelormittal.com
Nispetiye Caddesi, Özden İş Merkezi, No: 22 Kat: 4 Levent, Istanbul
Ran Chasdai
T+972 3 687 69 89
M+972 54 75 00 959
F +972 36 87 70 28
ran.chasdai@arcelormittal.com
22 Rival Str, Tel Aviv, Israel
Christophe Monnot
T +971 (4) 8035916
M +971 (50) 7702819
Christophe.Monnot@arcelormittal.com
Plot S40703, South Zone 4, JAFZA, 262098 Dubai, United Arab Emirates
Vivek Sinha
T +91 22 4248 9506
M +91 91676 10498
vivek.sinha@arcelormittal.com
A/403 & B/402, Delphi, Hiranandani Business Park, Powai, Mumbai – 400 076, India.
Jiang-Wu Ning
T +8621 58368200 M +86 15021110871
F +8621 58368107
ning.jiang@arcelormittal.com
13/F Times Square,500 Zhangyang Rd, 200122 Shanghai, China
Alain Fremy
T +65 64 12 74 62
alain.fremy@arcelormittal.com
72 Anson Road, #08-00, Anson House, 079911, Singapore
Africa
Nigeria, Guinea, Liberia,
Sierra Leone
West and
central
regions
Angola, Benin,
Botswana, Burkina Faso,
Burundi, Cameroon,
Central African Republic,
Chad, Côte D’Ivoire, PR
Congo, Equatorial Guinea,
Gabon, Gambia, Ghana,
Guinea-Bissau, Malawi,
Mali, Mauritania, Niger,
Republic Congo, Ruanda,
Senegal, Togo, Uganda,
Zambia
North region
Morocco, Algeria, Libya,
Tunisia
South region
Lesotho, Madagascar,
Mozambique, Namibia,
SAR, Swaziland, Zimbabwe
East region
Djibouti, Eritrea,
Ethiopia, Kenya, Somalia,
the South Sudan, Tanzania
Emeka MacDonald Alozie,
T +234 1 277 0802
M +234 808 621 0480
F +234 1 277 0803
emeka.macdonaldalozie@arcelormittal.com
1B Adebayo Doherty Street Off Admiralty Way, Lekki Ph1. Lagos, Nigeria
Venatio Wilson
T +221 33 859 76 30
M +221 77 569 63 54
Venantio.Wilson@arcelormittal.com
Avenue Cheikh Anta Diop - Immeuble SAPHIR
B.P. 25 377 Dakar-Fann, Senegal
Driss Chraibi
T +212 522 74 96 24
M +212 661 43 96 45
F +212 529 04 49 99
driss.chraibi@arcelormittal.com
Casanearsbore Park Shore 14 - R.D.C.- Plateau №2 1100, Bd AI Qods - Sidi Maarouf
Casablanca-Maroc
Renier van der Merwe
T +27 11 722 86 24
renier.vandermerwe@arcelormittal.com
The Place, 1 Sandton Dr, Sandhurst, Sandton 2196, South Africa
Christophe Monnot
T +971 48 03 59 16
M +971 50 77 02 819
Christophe.Monnot@arcelormittal.com
Plot S40703, South Zone 4, JAFZA 262098 Dubai, United Arab Emirates
35
PJSC ‘ArcelorMittal Kryvyi Rih’
50095 Ukraine, Dneporopetrovsk region, Kryvyi Rih, Ordzhonikidze str., 1
Phone: +38(056) 499-33-33 | Fax: +38(056) 499-85-50;
www.arcelormittal.com.ua
amkr.marketing@arcelormittal.com