F-12-989
F-12-989
October, 1997
October, 1997
ASSEMBLY INSTRUCTIONS FOR
L-TEC 160 SPOOL ADAPTOR KIT
ASSEMBLY INSTRUCTIONS FOR
L-TEC 160 SPOOL ADAPTOR KIT
In order to use the 15-lb. spool of .023 wire with the L-TEC
160, Spool Adaptor Kit P/N 17511 is required.
In order to use the 15-lb. spool of .023 wire with the L-TEC
160, Spool Adaptor Kit P/N 17511 is required.
Assembly Instructions (see Figs. 1 & 2)
Assembly Instructions (see Figs. 1 & 2)
1. Mount the spool of wire so the recessed side of the
spool faces out and the wire is drawn from the bottom
of the spool. Be sure the stud on the spindle engages
the small round indentation in the spool, (see Fig. 1.)
2. Slide the spacer over the spindle.
3. Slide the hose clamp over the end of the spacer.
4. With the spindle stud still engaged all the way in the
indentation in the spool, push the spacer tightly against
the spool and tighten the hose clamp.
1. Mount the spool of wire so the recessed side of the
spool faces out and the wire is drawn from the bottom
of the spool. Be sure the stud on the spindle engages
the small round indentation in the spool, (see Fig. 1.)
2. Slide the spacer over the spindle.
3. Slide the hose clamp over the end of the spacer.
4. With the spindle stud still engaged all the way in the
indentation in the spool, push the spacer tightly against
the spool and tighten the hose clamp.
The above procedure is necessary to keep the spindle stud
engaged in the spool indentation. This will prevent the spool
from “free wheeling”, which can result in tangled wire.
The above procedure is necessary to keep the spindle stud
engaged in the spool indentation. This will prevent the spool
from “free wheeling”, which can result in tangled wire.
(For 15-lb. Spool of .023-in. Wire)
(For 15-lb. Spool of .023-in. Wire)
F-12-989
F-12-989
October, 1997
October, 1997
ASSEMBLY INSTRUCTIONS FOR
L-TEC 160 SPOOL ADAPTOR KIT
ASSEMBLY INSTRUCTIONS FOR
L-TEC 160 SPOOL ADAPTOR KIT
In order to use the 15-lb. spool of .023 wire with the L-TEC
160, Spool Adaptor Kit P/N 17511 is required.
In order to use the 15-lb. spool of .023 wire with the L-TEC
160, Spool Adaptor Kit P/N 17511 is required.
Assembly Instructions (see Figs. 1 & 2)
Assembly Instructions (see Figs. 1 & 2)
1. Mount the spool of wire so the recessed side of the
spool faces out and the wire is drawn from the bottom
of the spool. Be sure the stud on the spindle engages
the small round indentation in the spool, (see Fig. 1.)
2. Slide the spacer over the spindle.
3. Slide the hose clamp over the end of the spacer.
4. With the spindle stud still engaged all the way in the
indentation in the spool, push the spacer tightly against
the spool and tighten the hose clamp.
1. Mount the spool of wire so the recessed side of the
spool faces out and the wire is drawn from the bottom
of the spool. Be sure the stud on the spindle engages
the small round indentation in the spool, (see Fig. 1.)
2. Slide the spacer over the spindle.
3. Slide the hose clamp over the end of the spacer.
4. With the spindle stud still engaged all the way in the
indentation in the spool, push the spacer tightly against
the spool and tighten the hose clamp.
The above procedure is necessary to keep the spindle stud
engaged in the spool indentation. This will prevent the spool
from “free wheeling”, which can result in tangled wire.
The above procedure is necessary to keep the spindle stud
engaged in the spool indentation. This will prevent the spool
from “free wheeling”, which can result in tangled wire.
(For 15-lb. Spool of .023-in. Wire)
(For 15-lb. Spool of .023-in. Wire)
BE SURE THIS STUD ENGAGES THE
INDENTATION IN THE WIRE SPOOL.
BE SURE THIS STUD ENGAGES THE
INDENTATION IN THE WIRE SPOOL.
Fig. 1 Spindle
Fig. 1 Spindle
RECESSED SIDE
RECESSED SIDE
SPINDLE
SPINDLE
WELDING WIRE
(FROM BOTTOM OF SPOOL)
WELDING WIRE
(FROM BOTTOM OF SPOOL)
SPOOL ADAPTOR KIT
(SPACER & HOSE CLAMP)
SPOOL ADAPTOR KIT
(SPACER & HOSE CLAMP)
Fig. 2 Spool Assembly
F-12-989
10/97
Fig. 2 Spool Assembly
F-12-989
BE SURE THIS STUD ENGAGES THE
INDENTATION IN THE WIRE SPOOL.
10/97
BE SURE THIS STUD ENGAGES THE
INDENTATION IN THE WIRE SPOOL.
Fig. 1 Spindle
Fig. 1 Spindle
RECESSED SIDE
RECESSED SIDE
SPINDLE
SPINDLE
WELDING WIRE
(FROM BOTTOM OF SPOOL)
WELDING WIRE
(FROM BOTTOM OF SPOOL)
SPOOL ADAPTOR KIT
(SPACER & HOSE CLAMP)
SPOOL ADAPTOR KIT
(SPACER & HOSE CLAMP)
Fig. 2 Spool Assembly
F-12-989
10/97
Fig. 2 Spool Assembly
F-12-989
10/97