GPVEC Commonly Use Restraint Knots Knots selected for ISBCW, Dee Griffin, DVM The parts of a rope are: The End or Working Part and the Standing Part (the long middle part of a rope not in the knot). A Bight is a bend in the rope that does not cross back across itself A Loop is a bend in the rope that DOES cross itself. A Hitch is a knot that ties a rope to something else A Bend is a knot that joins two ropes. CLOVE HITCH (Easy to untie) The 2nd loop is placed over 1st loop HALTER TIE Clove Hitch Halter Tie (Quick Release) Full wrap (hitch) with bend pulled through half hitch (Griffin’s favorite chute halter tie) Bowline … (A loop around Wrap around hitching pipe or post twice before the halter tie Non-Choke Lariat Honda Hitch the neck that won’t get tight) Lariat Honda . Knot => WEAVER or SHEET BEND . (Used to tie two different ropes together) Notice: It is like a Bowline except joins two ropes Great for tying the end of a halter lead to a Honda (lariat eye) LEG LEG Bight or Bend (Goes around the fixed object) “Slip Loop” Leg or Head Restraint Used on legs on downers & Can be used as a Quick Halter TRUCKER’S HITCH Truckers use this knot to tie down loads Vets use to pull legs back tight after casting Standing Part/End (the long part or attached part) http://www.animatedknots.com/ is an excellent knot tying Internet site Restraint & Handling for Veterinary Technicians & Assistants by Bonnie Ballard & Jody Rockett is an outstanding animal restraint book Constrictor Knot This is the knot I use to tie the meloxicam dosing plunger to the dosing outer tube. I tie a “Square Knot” over the “Constrictor Knot” to insure the “Constrictor Knot” does not loosen. Bowline Half-hitch DOUBLE HALF HITCH CASTING METHOD (Easiest to cast – Potential injury of bull’s penis or cow’ milk vein) http://www.animatedknots.com/ is an excellent knot tying Internet site Restraint & Handling for Veterinary Technicians & Assistants by Bonnie Ballard & Jody Rockett is an outstanding animal restraint book