TRUCK-LITE TKL/3875/3876 Incandescent Back-Up Lighting 60® SERIES BACK-UP ECONOMY SEALED LAMPS •Vibration welded lens and housing •Shock-mounted bulb to extend life •Legal mounted horizontally or vertically •6.38”L x 2.25”W x 2.13”D Part No. 60284C, Clear. MODEL 20®, BULB REPLACEABLE BACK-UP LAMPS •3.80”L x 2.59”W x 1.61”D Part No. 20310C, Clear, flush mount with ground wire. Part No. 20310Y, Amber, flush mount with ground wire. SUPER 80® DOME LED LAMP — 6 - 12 DIODE •Lower profile than competitive lamps, mounts in 1” deep pocket •Nearly flush mount, .1” protrusion •Not affected by cold temperatures •LEDs provide whiter, brighter light •Retrofit or replacement quick and easy •Flicker free lighting in all temperatures •18.2”L x 5.75”W Part No. 80251C, Clear. SUPER 44® LED 5.9” DOME SEALED LAMPS — 6 DIODE •Surface mount design eliminates the need for large hole cutouts in trailer ceiling •Available with integrated on/off switch as well as externally controlled version •Lens design recesses lens into housing, to prevent damage from impact •Not affected by cold temperatures, providing flicker-free lighting with a faster start-up time Part No. 44438C, Clear lamp with swtich. Part No. 44439C, Clear lamp. SUPER 44® LED 4.3” DOME SEALED LAMP — 6 DIODE •Low profile lamp, approximately 1” deep for where space is at a premium •Same 6 diode pattern used in Truck-Light S/T/T and Back-Up •Designed to operate in extremely cold temperatures •Broad light pattern with approximately 360 lumens of light output Part No. 44308C, Clear. 44® SERIES DOME LED 4” SEALED LAMPS — 54 DIODE •Popular in trailer and body applications •Virtually impervious to shock and vibration, a major cause of failure for lamps with incandescent bulbs Part No. 44042C, Clear, grommet kit. Part No. 44046C, Clear, grey flange kit. 80® SERIES DOME LED LAMP — 6 DIODE •Surpasses 2,000 hours of incandescent bulbs by nearly 50x •As much as 60% lower power consumption than incandescent lamps, allowing additional power for other vehicle applications Part No. 80162C, Clear. FLUORESCENT INTERIOR FLUSH MOUNT LAMP •High impact snap-on polycarbonate lens •Metal housing is white epoxy powder coated •Installation is easy with integrated 2 pin Packard connector •21.2”L x 6.75”W x 1.69”D Part No. 80418, White. 80® SERIES DOME BULB REPLACEABLE LAMPS •Chrome-plated steel housing •6.40”D x 1.62”H Part No. 80350, Clear, lamp with chrome housing and switch. Part No. 80351, Clear, lamp with chrome housing. Part No. 80352, Clear, lamp with coated housing and switch. Part No. 80353, Clear, lamp with coated housing. greggdistributors.ca FLUORESCENT SURFACE MOUNT INTERIOR LAMP •Designed for heavy use service vehicles such as industrial supply trucks, emergency vehicles or mobile kitchens •Clear acrylic snap-lock lens •Anodized aluminum housing features black end caps •Two 15 watt fluorescent tubes produce light output of 1650 design lumens •Convenient on/off switch •18.3”L x 5.50”W x 1.63”D Part No. 80444, White. 4” SKY-LITE •Provides trailer access to external sunlight to assist in lighting up trailer interior, without the need for additional power or wiring •Snap-in design and peel-and-stick adhesive gasket provide an easy to install lens that keeps water out Part No. 40270C, For 0.05” aluminum sheets. Part No. 40271C, For 0.31” composite panels. Part No. 40275C, For 0.25” composite panels. 80® SERIES DOME BULB REPLACEABLE LAMPS •Chrome-plated steel housing •Lens attaches to housing with four screws •Uses flanged mounting to mount to a flat surface •8.25”D x 2.16”H Part No. 80354, Clear with on/off switch. Part No. 80355, Clear. SUPER 10® UTILITY 2½” SEALED LAMP •Unique shock-mount extends bulb life •15,000 hour rated bulb life Part No. 10209C, Clear, lamp only. 40® SERIES DOME 4” SEALED LAMPS •Polycarbonate lens and housing are vibration welded •Bulb is shock mounted for extended life Part No. 40003, Clear, grommet kit. Part No. 40023, Clear, flange kit. Part No. 40203, Clear, sealed lamp only. Part No. 40223, Clear, lamp and gray flange. O25 S25 Lighting & Mirror Products for Mobile Equipment LED & Incandescent Dome & Utility Lighting 84® SERIES SUPER STRIP-LITE LED — 6 - 12 DIODE •LED light source provides a more even light for truck cargo •Aluminum substrate won’t rust •Less susceptible to shock and vibration •Reduces shadowed areas and increases visibility •Can be mounted most anywhere •LED’s draw less current, creating less heat uses 12 diodes at 1.4 amps •2 ft. uses 6 diodes •Hardwired with 16 ga. wires and molded .180 bullets Part No. 84200C, 4 ft. corner mount. Part No. 84205C, 4 ft. flat mount. Part No. 84210C, 2 ft. corner mount. Part No. 84215C, 2 ft. flat mount. Part No. 84216C, 2 ft. flat mount with lens. Part No. 84206C, 4 ft. flat mount with lens.