Main supply
for motors
Suspension control 2x1sqmm = one for each suspension
Protected main supply for motors 3PH+Gx2,5sqmm
Emergency security line 2x1,5sqmm to main power switch or line contactor
SM CONTROL
In the whole control panels range, it is the simplest
and most inexpensive version for the positioning
of suspensions in small and medium studios. Each
button directly controls one suspension, so that it is
not possible to either move or memorise predefined suspension groups.
This control panel is ideal for low budget
productions or where there is a low frequency of
studio re-setting.
As an option you can combine this panel with the
radio remote control RC2000.
PSM CONTROL
Similar to the CSM, this panel control is provided
with a computer on the inside, which amplifies
its performances. It is possible to create and
memorise suspension groups, which can be
subsequently retrieved, with a great advantage in
terms of rapidity and safety. The PSM can be
provided with a remote control which, unlike the
CSM, allows the programming and managing of
suspension groups, without having to resort to the
control board programming. A wireless remote
control is also available for complete flexibility
and freedom of movement. Thanks to its
advanced performances, this control is the ideal
solution for medium and large studios with
frequent suspension re-settings.
Main supply
for motors
Protected main supply for motors 3PH+Gx2,5sqmm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Suspension control 2x1sqmm = one for each suspension
How to choose a control panel.
Thanks to the experience gained in TV studios all over the world, IFF has developed a wide range of suspension control panels,
which offer the perfect solution of money and performance to any positioning requirements.
SUSPENSIONS CONTROL SYSTEM
Emergency security line 2x1,5sqmm to main power switch or line contactor
SUSPENSIONS CONTROL SYSTEM
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
10
0
10
1
10
2
10
3
10
4
10
5
10
6
10
7
Receiver for radio control
10
8
10
9
11
0
11
1
11
2
11
3
11
4
11
5
11
6
11
7
11
8
11
9
12
0
12
1
12
2
12
3
12
4
12
5
OCL
AL
RE
M
O
TE
LIFT CONTROL “PSM”
8x0.22sqmm shielded
...
....
...
...
....
...
LIFT CONTROL “SM”
Main feed for control panel PH+N+G 3x2.5sqmm
Main feed for control panel PH+N+G 3x2.5sqmm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
10
0
10
1
10
2
10
3
10
4
10
5
10
6
10
7
Receiver for radio control
10
8
10
9
11
0
11
1
11
2
11
3
11
4
11
5
11
6
11
7
11
8
11
9
12
0
12
1
12
2
12
3
12
4
12
5
OCL
AL
RE
M
O
TE
LIFT CONTROL “CSM”
8x0.22sqmm shielded
...
....
...
...
....
...
Main feed for control panel PH+N+G 3x2.5sqmm
36
CSM CONTROL
Ideal for medium sized studios, its electronic
board system makes the CSM flexible and
adaptable to any number of suspensions to be
controlled. Due to an electronic board designed
on purpose, more suspensions (groups) up to a
maximum of 10 units, can be moved at the same
time making any operation of light maintenance
and resetting faster. Furthermore, this control
allows a remote control to be placed directly on a
panel or on outlets, which are in other points in
the studio. A wireless remote control is also
available to allow the maximum movement
freedom. Selecting one or more suspensions on
the control panel, by means of the remote control
their movements can be check at close range, so
avoiding accidental collisions with the scenery or
other structures in the studio.
LIFT CONTROLS
Main supply
for motors
Protected main supply for motors 3PH+Gx2,5sqmm
Suspension control 2x1sqmm = one for each suspension
Suspension control 2x1sqmm = one for each suspension
Emergency security line 2x1,5sqmm to main power switch or line contactor
Protected main supply for motors 3PH+Gx2,5sqmm
Emergency security line 2x1,5sqmm to main power switch or line contactor
Main supply
for motors
LIFT CONTROL “RC2000”
RC2000 CONTROL
The RC2000 wireless remote control has been
designed to satisfy requirements of flexibility and
mobility in TV studios, but with particular
attention to low budget projects. The economic
advantage and technical performances, such as
groups creation and memorisation, make of it the
most profitable solution for studios up to 50 units.
Designed to work in combination with the pole
operating control or with the SM control, the RC
2000 is the ideal solution for studios which cannot
bear the cost of models such as the PSM or the
CSM, but at the same time do not want to
renounce to speed and functional capacity of the
most advanced control panels.
Main feed for control panel PH+N+G 3x2.5sqmm
LIFT CONTROLS
37
Main supply
for motors
Suspension control 2x1sqmm = one for each suspension
Protected main supply for motors 3PH+Gx2,5sqmm
Emergency security line 2x1,5sqmm to main power switch or line contactor
SM CONTROL
In the whole control panels range, it is the simplest
and most inexpensive version for the positioning
of suspensions in small and medium studios. Each
button directly controls one suspension, so that it is
not possible to either move or memorise predefined suspension groups.
This control panel is ideal for low budget
productions or where there is a low frequency of
studio re-setting.
As an option you can combine this panel with the
radio remote control RC2000.
PSM CONTROL
Similar to the CSM, this panel control is provided
with a computer on the inside, which amplifies
its performances. It is possible to create and
memorise suspension groups, which can be
subsequently retrieved, with a great advantage in
terms of rapidity and safety. The PSM can be
provided with a remote control which, unlike the
CSM, allows the programming and managing of
suspension groups, without having to resort to the
control board programming. A wireless remote
control is also available for complete flexibility
and freedom of movement. Thanks to its
advanced performances, this control is the ideal
solution for medium and large studios with
frequent suspension re-settings.
Main supply
for motors
Protected main supply for motors 3PH+Gx2,5sqmm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Suspension control 2x1sqmm = one for each suspension
How to choose a control panel.
Thanks to the experience gained in TV studios all over the world, IFF has developed a wide range of suspension control panels,
which offer the perfect solution of money and performance to any positioning requirements.
SUSPENSIONS CONTROL SYSTEM
Emergency security line 2x1,5sqmm to main power switch or line contactor
SUSPENSIONS CONTROL SYSTEM
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
10
0
10
1
10
2
10
3
10
4
10
5
10
6
10
7
Receiver for radio control
10
8
10
9
11
0
11
1
11
2
11
3
11
4
11
5
11
6
11
7
11
8
11
9
12
0
12
1
12
2
12
3
12
4
12
5
OCL
AL
RE
M
O
TE
LIFT CONTROL “PSM”
8x0.22sqmm shielded
...
....
...
...
....
...
LIFT CONTROL “SM”
Main feed for control panel PH+N+G 3x2.5sqmm
Main feed for control panel PH+N+G 3x2.5sqmm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
10
0
10
1
10
2
10
3
10
4
10
5
10
6
10
7
Receiver for radio control
10
8
10
9
11
0
11
1
11
2
11
3
11
4
11
5
11
6
11
7
11
8
11
9
12
0
12
1
12
2
12
3
12
4
12
5
OCL
AL
RE
M
O
TE
LIFT CONTROL “CSM”
8x0.22sqmm shielded
...
....
...
...
....
...
Main feed for control panel PH+N+G 3x2.5sqmm
36
CSM CONTROL
Ideal for medium sized studios, its electronic
board system makes the CSM flexible and
adaptable to any number of suspensions to be
controlled. Due to an electronic board designed
on purpose, more suspensions (groups) up to a
maximum of 10 units, can be moved at the same
time making any operation of light maintenance
and resetting faster. Furthermore, this control
allows a remote control to be placed directly on a
panel or on outlets, which are in other points in
the studio. A wireless remote control is also
available to allow the maximum movement
freedom. Selecting one or more suspensions on
the control panel, by means of the remote control
their movements can be check at close range, so
avoiding accidental collisions with the scenery or
other structures in the studio.
LIFT CONTROLS
Main supply
for motors
Protected main supply for motors 3PH+Gx2,5sqmm
Suspension control 2x1sqmm = one for each suspension
Suspension control 2x1sqmm = one for each suspension
Emergency security line 2x1,5sqmm to main power switch or line contactor
Protected main supply for motors 3PH+Gx2,5sqmm
Emergency security line 2x1,5sqmm to main power switch or line contactor
Main supply
for motors
LIFT CONTROL “RC2000”
RC2000 CONTROL
The RC2000 wireless remote control has been
designed to satisfy requirements of flexibility and
mobility in TV studios, but with particular
attention to low budget projects. The economic
advantage and technical performances, such as
groups creation and memorisation, make of it the
most profitable solution for studios up to 50 units.
Designed to work in combination with the pole
operating control or with the SM control, the RC
2000 is the ideal solution for studios which cannot
bear the cost of models such as the PSM or the
CSM, but at the same time do not want to
renounce to speed and functional capacity of the
most advanced control panels.
Main feed for control panel PH+N+G 3x2.5sqmm
LIFT CONTROLS
37
SM MANUAL CONTROL
CSM LIFT CONTROL
1
17
33
49
63
79
95
98
114
2
18
34
50
64
80
96
99
115
3
19
35
51
65
81
97
100
116
4
20
36
52
66
82
101
117
5
21
37
53
67
83
102
118
6
22
38
54
68
84
103
119
7
23
39
55
69
85
104
120
8
24
40
56
70
86
105
121
9
25
41
57
71
87
106
122
10
26
42
58
72
88
107
123
11
27
43
59
73
89
108
124
12
28
44
60
74
90
109
125
13
29
45
61
75
91
110
14
30
46
62
76
92
111
15
31
47
63
77
93
112
16
32
48
62
78
94
113
R
E
M
O
T
E
L
O
C
A
L
ON
STOP
EMERGENCY
UP
LEFT
RIGHT
DOWN
FULL
RESET
LIFT CONTROL SM
This is the most inexpensive and simple solution, for studios with 3040 suspensions but, if required, also for higher quantity. The wall
control box is placed in the studio to permit to carry out operations
38
at sight. From the outside you can see a magneto-thermal main
switch with light, an emergency pushbutton with light, a key-switch
with light and the up-down switches to move the suspensions.
LIFT CONTROLS
LIFT CONTROL CSM
The CSM is a control system for 160 (or more if required)
suspensions, to be moved either singularly or in groups of maximum
10 units simultaneously. The control box has a key switch with three
positions: remote-off-local, a light showing that the remote-local
control is activated. It is provided with emergency push button which,
when activated, disables all the system of motor power supply. A red
light shows this emergency state. The CSM unit has individual up-
down (and left-right if required) push buttons for each suspension.
The operator can activate up to 10 buttons to control groups of
suspensions. If the operator selects more than 10 suspensions the
system makes the light of the full function turn on and disables the
system. It is necessary to push the reset push button to make another
selection. An optional wired hand-held remote control is available on
request. Other solutions are available and customised on request.
LIFT CONTROLS
39
SM MANUAL CONTROL
CSM LIFT CONTROL
1
17
33
49
63
79
95
98
114
2
18
34
50
64
80
96
99
115
3
19
35
51
65
81
97
100
116
4
20
36
52
66
82
101
117
5
21
37
53
67
83
102
118
6
22
38
54
68
84
103
119
7
23
39
55
69
85
104
120
8
24
40
56
70
86
105
121
9
25
41
57
71
87
106
122
10
26
42
58
72
88
107
123
11
27
43
59
73
89
108
124
12
28
44
60
74
90
109
125
13
29
45
61
75
91
110
14
30
46
62
76
92
111
15
31
47
63
77
93
112
16
32
48
62
78
94
113
R
E
M
O
T
E
L
O
C
A
L
ON
STOP
EMERGENCY
UP
LEFT
RIGHT
DOWN
FULL
RESET
LIFT CONTROL SM
This is the most inexpensive and simple solution, for studios with 3040 suspensions but, if required, also for higher quantity. The wall
control box is placed in the studio to permit to carry out operations
38
at sight. From the outside you can see a magneto-thermal main
switch with light, an emergency pushbutton with light, a key-switch
with light and the up-down switches to move the suspensions.
LIFT CONTROLS
LIFT CONTROL CSM
The CSM is a control system for 160 (or more if required)
suspensions, to be moved either singularly or in groups of maximum
10 units simultaneously. The control box has a key switch with three
positions: remote-off-local, a light showing that the remote-local
control is activated. It is provided with emergency push button which,
when activated, disables all the system of motor power supply. A red
light shows this emergency state. The CSM unit has individual up-
down (and left-right if required) push buttons for each suspension.
The operator can activate up to 10 buttons to control groups of
suspensions. If the operator selects more than 10 suspensions the
system makes the light of the full function turn on and disables the
system. It is necessary to push the reset push button to make another
selection. An optional wired hand-held remote control is available on
request. Other solutions are available and customised on request.
LIFT CONTROLS
39
PSM LIFT CONTROL
1
17
33
49
63
79
95
2
18
34
50
64
80
3
19
35
51
65
81
4
20
36
52
66
5
21
37
53
6
22
38
7
23
8
24
98
114
96
99
115
97
100
116
82
101
117
67
83
102
118
54
68
84
103
119
39
55
69
85
104
120
40
56
70
86
105
121
R
E
M
O
T
E
L
O
C
A
L
ON
STOP
9
25
41
57
71
87
106
122
10
26
42
58
72
88
107
123
11
27
43
59
73
89
108
124
12
28
44
60
74
90
109
125
13
29
45
61
75
91
110
14
30
46
62
76
92
111
15
31
47
63
77
93
112
16
32
48
62
78
94
113
EMERGENCY
UP
LEFT
RIGHT
DOWN
FULL
RESET
LIFT CONTROL PSM
The PSM is an electronic control system of great reliability with a
system of cards that can be replaced in case of malfunctioning. It
can control up to 160 suspensions (or more if required), either
singularly or groups of maximum 10 units (programmable)
simultaneously. The control box has a key switch with three
positions: remote-off-local, a light showing that the remote-local
control is activated. It is provided with emergency push-button
which, when it is activated, disables all the system of motor power
supply. A red light shows this emergency state. The PSM unit has
40
RC2000 LIFT CONTROL
The system is composed of a radio transmitter and several receivers,
one for each unit. It works on 433Mhz frequency.
Therefore, in order to avoid interference, the firmware is processed
with its own codes. All the receivers will automatically deactivate
after a few seconds from the extinction of the transmitter. This to
avoid the risk of having some machines on when the transmitter is
off; if the receivers do not get any signal for a few seconds, they
automatically switch off.
The receiver is composed of a RF part (homologated in accordance
with the BST G130 and 938J specifications), a decoding part and a
power one.
The power part sends microprocessor information to the motors and
provides the lighting of the selection led.
A keyboard is on the front panel: 0-9 buttons, one clear button, four
buttons for up, down, left and right controls. The transmitter can
control from 1 to 8 machines simultaneously (this value is factory set
on users specifications).
The number of desired machines will be digitised on the keyboard by
the operator: it will be indicated on the display, then the enter button
will be pressed. On the selected machine a led will light up to
indicate that the machine is ready. In case the simultaneous control
function of more than one machine is to be activated (max 8) the
same procedure must be followed: digit the number of another
machine, then press enter and so on. Once the selection is
completed, press one of the up, down, left, right controls to move
simultaneously all the selected machines.
The transmitter part is certified in accordance with BZT G130 and
939J specifications.
The transmitter is fed with rechargeable battery with external
battery charger (supplied) and it is provided with a low battery
indicator.
individual up-down (and left-right if required) push buttons for
each suspension. The operator can activate up to 10 buttons to
control groups of suspensions. If the operator selects more than 10
suspensions the system makes the light of the full function turn on
and disables the system. It is necessary to push the reset push
button to make another selection. It has a built-in computer which
allows the selection and storage of groups which can be recalled or
deleted all by means of the PSM wired or radio remote control.
Other solutions are available and customised on request.
LIFT CONTROLS
LIFT CONTROLS
41
PSM LIFT CONTROL
1
17
33
49
63
79
95
2
18
34
50
64
80
3
19
35
51
65
81
4
20
36
52
66
5
21
37
53
6
22
38
7
23
8
24
98
114
96
99
115
97
100
116
82
101
117
67
83
102
118
54
68
84
103
119
39
55
69
85
104
120
40
56
70
86
105
121
R
E
M
O
T
E
L
O
C
A
L
ON
STOP
9
25
41
57
71
87
106
122
10
26
42
58
72
88
107
123
11
27
43
59
73
89
108
124
12
28
44
60
74
90
109
125
13
29
45
61
75
91
110
14
30
46
62
76
92
111
15
31
47
63
77
93
112
16
32
48
62
78
94
113
EMERGENCY
UP
LEFT
RIGHT
DOWN
FULL
RESET
LIFT CONTROL PSM
The PSM is an electronic control system of great reliability with a
system of cards that can be replaced in case of malfunctioning. It
can control up to 160 suspensions (or more if required), either
singularly or groups of maximum 10 units (programmable)
simultaneously. The control box has a key switch with three
positions: remote-off-local, a light showing that the remote-local
control is activated. It is provided with emergency push-button
which, when it is activated, disables all the system of motor power
supply. A red light shows this emergency state. The PSM unit has
40
RC2000 LIFT CONTROL
The system is composed of a radio transmitter and several receivers,
one for each unit. It works on 433Mhz frequency.
Therefore, in order to avoid interference, the firmware is processed
with its own codes. All the receivers will automatically deactivate
after a few seconds from the extinction of the transmitter. This to
avoid the risk of having some machines on when the transmitter is
off; if the receivers do not get any signal for a few seconds, they
automatically switch off.
The receiver is composed of a RF part (homologated in accordance
with the BST G130 and 938J specifications), a decoding part and a
power one.
The power part sends microprocessor information to the motors and
provides the lighting of the selection led.
A keyboard is on the front panel: 0-9 buttons, one clear button, four
buttons for up, down, left and right controls. The transmitter can
control from 1 to 8 machines simultaneously (this value is factory set
on users specifications).
The number of desired machines will be digitised on the keyboard by
the operator: it will be indicated on the display, then the enter button
will be pressed. On the selected machine a led will light up to
indicate that the machine is ready. In case the simultaneous control
function of more than one machine is to be activated (max 8) the
same procedure must be followed: digit the number of another
machine, then press enter and so on. Once the selection is
completed, press one of the up, down, left, right controls to move
simultaneously all the selected machines.
The transmitter part is certified in accordance with BZT G130 and
939J specifications.
The transmitter is fed with rechargeable battery with external
battery charger (supplied) and it is provided with a low battery
indicator.
individual up-down (and left-right if required) push buttons for
each suspension. The operator can activate up to 10 buttons to
control groups of suspensions. If the operator selects more than 10
suspensions the system makes the light of the full function turn on
and disables the system. It is necessary to push the reset push
button to make another selection. It has a built-in computer which
allows the selection and storage of groups which can be recalled or
deleted all by means of the PSM wired or radio remote control.
Other solutions are available and customised on request.
LIFT CONTROLS
LIFT CONTROLS
41