TELONE, COP, MBR, & PROFUME
APPLICATION EQUIPMENT
PRICE SHEET
FUMIGANT KITS:
R-PIC-104
Fumigant Kit for Two Non-Pressurized Cylinders (4 Rows) $ 984.11
Includes:
Two MB-3251A Cylinder Connectors,
RMB-302A Sight Glass Flow Assembly,
RF-10-SS-A S.S. Filter, Four Outlet Manifold,
R-8284-N2-A Nitrogen Regulator, Check
Assemblies, CP4916 Orifice Discs, Four
R-45SS-24 24” Injection Tubes, and
40FT of #6 1/4” Poly Tubing.
R-PIC-104E
Same as R-PIC-104 With A 344BEC-235-C
R-PIC-105FM
Fumigant Kit for Two Cylinders (4 Rows)
$ 2083.73
Includes:
Two MB-3251A Cylinder Connectors,
MB-PIC-FM Flow Meter, MB-PIC-MVA
Metering Valve Assembly, MB-PIC-FMR
Flow Meter Stand, 10’ & 6’ of 3/8HPSS-8
High Pressure Stainless Steel Braided Teflon
Hose, Four Outlet Manifold, R-8284-N2-A
Nitrogen Regulator, Check Valve Assemblies,
CP4916 Orifice Discs, Four R-45SS-24 24”
Injection Tubes, RF-10-SS-A S.S. Filter, &
Mounting Brackets.
R-PIC-105FME
Same as R-PIC-105FM With A 344BEC-235-C
R-PIC-105FK
Kit to Change R-PIC-104 to Flow Meter Unit
$ 1330.88
Includes:
10’ & 6’ of 3/8HPSS-8 High Pressure
Stainless Steel Braided Teflon Hose,
MB-PIC-FM Flow Meter, MB-PIC-MVA
Metering Valve Assembly, MB-PIC-FMR
Flow Meter Stand. (No Filter or Filter Bracket)
R-PIC-4CYL
Kit to Add Two Additional Cylinders to Existing Unit
Includes:
Two FUMSS-8 Hose Assemblies,
MB-3251A Cylinder Connector, & Two
N2SS-4 N2 Hose Assemblies.
Effective 2-15-11
$ 1296.75
$ 2372.74
$ 185.33
1
FLOW METER ACCESSORIES:
MB-PIC-FM
Flow Meter Only
Includes:
2 - 4” Brass Nipples
$ 950.00
MB-PIC-MVA
Metering Valve Assembly
Includes:
3/8” Male X Female, Cut-Off Valve, &
3/8” Stainless Steel Metering Valve
$ 71.50
MB-PIC-FMR
Flow Meter Stand Used to Tractor Mount Flow Meter
Includes:
Flow Meter Mounting Bracket, Mounting
Pole, and Tractor Mount.
$ 80.59
Two Cylinder Rack
(Holds Two Fumigant Cylinders & 1 Nitrogen Cylinder)
$ 248.07
PIC-4CYL
Four Cylinder Rack
(Holds Four Fumigant Cylinders &1 Nitrogen Cylinder)
$ 277.99
PIC-PIG-CYL
One Pig Rack
$ 439.95
(Holds One 1500# Cylinder (Pig) & 1 Nitrogen Cylinder)
TANK RACKS:
PIC-2CYL
PIC-PIG-CYL-CM PIC-PIG-CYL Rack Including Control Arm Mount
ADDITIONAL FILTRATION:
RF-10-SS-A
COP Filter Assembly
Includes:
Complete Large Capacity Fumigant Filter
With Cartridge, Gauge, Drain Valve, &
Fittings.
COP Filter Only
PARTS:
1P753
Cartridge
235-V
3-1/8” ID Viton O Ring
605
3/4” ID Gasket
B2 10”
Canister
0-100
PSI Gauge
RF-10-SS-TELONE Telone Filter Assembly
Includes:
Complete Large Filter. Does Not Include
Drain or Gauge.
PARTS:
RF-10-SS
H6B-101
139-1212
1P753
Filter
Female Quick Coupler
3/4” X 3/4” Male Hose Barb
3/4” X 12” Nipple
Cartridge
Effective 2-15-11
$ 529.20
$ 365.00
$ 286.11
$ 6.70
$ 3.80
$ 0.95
$ 115.50
$ 10.33
$ 395.00
$ 286.11
$55.80
$4.27
$6.62
$6.70
2
ELECTRIC WIRING:
344BEC-235-C
12-Volt Electric Cutoff
Includes:
Wiring, Switch, Box, & Disconnect.
$ 382.96
RSW-3
Electric Wiring Only
(Specify:
SPST Switch Used for New Style or
DPDT Switch Used for Old Style 344EC)
$ 30.00
344-EC
Electric Ball Valve Only
PARTS:
CP38442-SS
AB344AE-KIT
CP19926-SS
$ 240.00
Stem
$ 26.54
Spare Parts Kit
$ 48.00
(Seals and O Rings)
Ball
$ 62.07
KZ84D-60A-M
1/2” On/Off Electric Ball Valve
$ 274.00
KZ84D-50K-0
1/2” Control Electric Ball Valve
PARTS:
MA-72KZ-226BRKT Mounting Bracket
KZ-EHSX-16A-K
Switch Box for
On/Off Valve
MA-3-PIN PWR
Plug KZ Adapter
$ 312.00
$ 53.00
$ 200.00
KZEH3-84D
1/2” Ball Valve
$ 62.50
$ 28.00
SO-16-3
Wire
$ 1.15
37121
Male Connector
$ 1.50
37131
Female Connector
$ 1.50
464
SPST Switch
$ 6.50
469
DPDT Switch
$ 9.00
31560
Butt Connector
$ 0.55
31505
Terminal Ring
$ 0.85
46102
Fuses
$ 0.25
Effective 2-15-11
3
SIGHT GLASS:
RMB-302A
Sight Glass Flow Indicator Assembly
Includes:
Pressure Gauge, Cut-Off Valve, & Flare
Hose Fitting
Ball Flow Indicator Only (1/2” NPT)
PARTS:
91518
Teflon Ball
302-03
Gasket Set
#2
Gasket
#5
Gasket
#6
Gasket
224-04
Glass Dome
Clear Vertical Sight Glass (Mirusso)
R-302
REGULATORS:
R-8284-N2-A
R-8284-N2
$ 185.85
$ 155.00
$ 4.10
$ 12.10
$ 6.65
$ 2.75
$ 2.75
$ 45.00
$30.00
Nitrogen Regulator (0-120 PSI) Complete
$ 180.00
Includes:
Regulator, Hex Nipple, Ball Valve, Close
Nipple, Check Valve, Tee & Blow Out Tube.
NO HOSES
Nitrogen Regulator Only
$ 150.00
Replacement Gauges for Nitrogen Regulators
6310
100# Gauge
6222
200# Gauge
6201
4000# Gauge
$ 16.00
$ 16.00
$ 22.00
R-30034
Female Nitrogen Quick Coupler 1/4” NPT
$ 12.70
R-13-3
Male Plug- Nitrogen Quick Coupler-1/8”
(For Use on Cylinder Valve)
$ 2.40
N2SS-4
Nitrogen Regulator Hose Assembly
Includes:
4FT of 1/4HPSS-4 & 1 Each of S-30B,
1104-2B, R-30034, R-13-3
$ 34.43
MB-3251A
Cylinder Connector With Valve and Hose Adapter
$ 26.89
R-3251
C-02 Nut & Nipple Only for Cylinder Connector
$ 5.00
P-3251
Profume Connector
25.45
Effective 2-15-11
4
HOSES:
3/8HPSS-8
1/4HPSS-4
3/8” High Pressure Stainless Steel Braided Teflon Hose
(Can also be referred to as 1/2”)
$5.20/ft.
Swage End Fittings – Installed
S-33B
1/2” Flare Swivel
1108-1B
3/8” MNPT Rigid
1108-2B
1/2” MNPT Rigid
$ 8.00/End
$ 6.00/End
$ 7.00/End
1/4” High Pressure Stainless Steel Braided Teflon Hose
$ 2.90/ft.
Swage End Fittings – Installed
S-30B
1/4” Flare Swivel
1104-1B
1/8” MNPT Rigid
1104-2B
1/4” MNPT Rigid
$ 3.36/End
$ 3.45/End
$ 4.37/End
FUMSS-4
FUM Hose Assembly (Mulch Layer-Manifold Outlet to Knives)
Includes: 4FT of 1/4HPSS-4 & 1 Each of S-30B, 1104-1B.
$ 18.41
FUMSS-8
FUM Hose Assembly (Chemical Cylinder to Sight Glass)
Includes: 4FT of 3/8HPSS-8 & 1 Each of 1108-1B, S-33B.
$ 36.00
POLYETHYLENE HOSES:
#6
1/4” I.D. X 3/8” O.D.
#12
3/8” I.D. X 1/2” O.D.
$ 0.25/Ft.
$ 0.50/Ft.
BRASS BALL VALVES:
70-101-01
70-102-01
70-103-01
70-104-01
70-105-01
70-604-A2
70-801-01
70-802-01
70-803-01
70-804-01
61-101-01
60-902-01
1/4” Female X Female
3/8” Female X Female
1/2” Female X Female
3/4” Female X Female
1” Female X Female
3/4” 3-Way Valve
1/4” Male X Female
3/8” MF Valve
1/2” Male X Female
3/4” Male X Female
1/4” Check Valve
3/8” Female X Female Needle
Effective 2-15-11
$ 16.81
$ 16.81
$ 16.81
$ 27.75
$ 35.06
$ 42.06
$ 20.07
$ 20.07
$ 20.07
$ 32.04
$ 72.88
$ 32.33
5
MANIFOLDS:
R-22
R-39
8 OUTLET MANIFOLD
12 OUTLET MANIFOLD/ 16 Outlet
FOR ADDITIONAL MANIFOLD OUTLETS:
127-4
1/4” Branch Tee
$ 41.00
$ 175.00
$ 3.74
½” ATW SERIES-BRASS STRAINER:
$ 95.00
-CP-5594-2-304SS
$ 11.71
-CP-5852-NY Gasket
$ 3.98
-70-801-01 Drain Valve ¼” Male x Female
$ 20.07
1” ATW SERIES-BRASS STRAINER:
-CP5594-3-304SS
-CP2570-8-FC Gasket
$ 430.80
$16.80
$ 2.85
ORIFICE DISC:
$ 3.03
CP-4916 Orifice Disc (One Needed Per Outlet or Shank)
R40 MANIFOLD OUTLET:
- CP-1325 Brass
$9.37
$ 1.31
- 4251-250 Brass ¼” Hose Barb
$ 3.12
Use Polytubing
- 5053-50-SS Brass
Strainer
$ 2.76
- CP1322 1/4TT
Brass
$ 2.18
Effective 2-15-11
6
R40 MBR MANIFOLD OUTLET:
- CP-1325 Brass
$ 14.84
$ 1.31
- 4251-312 Brass
$ 3.12
- CP4928 Adapter 1/8”NPT
$ 8.23
- CP1322 1/4TT
Brass
$ 2.18
Use SS Teflon Hose
R40 ML MULCH LAYER MANIFOLD OUTLET:
- CP-1325 Brass
$ 17.51
$ 8.23
- CP-4928 Adapter 1/8”T Brass
$ 1.31
- 5053-50-SS Brass
Strainer
$ 2.76
- CP1322 1/4TT
Brass
$ 2.18
-CP-4916 Orifice Plate
$ 3.03
R41 SHANK CHECK VALVE & ORIFICE DISC ASSEMBLY
- 139-42 ¼” Barb x 1/8” MPT
$ 0.69
- CP1335 – 1/8T Brass
$ 2.18
- 11750-10 Check Valve (10# spring)
$ 6.45
For MBR
$ 21.89
For Telone
For Row Bedder
- CP4916 Orifice Plate
$ 3.03
Use Polytubing
- CP4928 Adapter 1/8 NPT
$ 8.23
- CP1325 Cap
$ 1.31
Effective 2-15-11
7
R41ML SHANK CHECK VALVE & ORIFICE DISC
$ 21.73
- 48-42 ¼” x 1/8” Male Flare Adapter
- CP1335 – 1/8T Brass
$ 0.53
$ 2.18
- CP4916 Orifice Plate
$ 3.03
- CP4928 Adapter 1/8 NPT
$ 8.23
- CP1325 Cap
$ 1.31
OPTIONAL: (Depending on Fumigant Used)
11750-10 Check Valve (10#) Spring
$ 6.45
PARTS FROM MANIFOLD TO COMPLETE
CHISEL BROADCAST UNIT
R400 MANIFOLD OUTLET:
$ 0.78
-139-44 1/4" Barb x 1/4 MPT
R411 SHANK CHECK VALVE & ORIFICE DISC ASSEMBLY
$ 20.00
- 139-42 ¼” Barb x 1/8” MPT
$ 0.69
- CP1335 – 1/8” T Brass
$ 2.18
- 4193A-5-50SS (5# spring)
$ 4.87
- CP4916 Orifice Plate
$ 3.03
- CP4928 Adapter 1/8 NPT
$ 7.92
- CP1325 Cap
$ 1.31
Effective 2-15-11
8
EXTRAS FOR TERR-O-GAS & CHLOR-O-PIC APPLICATION
INJECTION TUBES:
These are 1/8” pipe, threaded so they can be applied to the R41 check valve/orifice disc
assembly. They can be welded to the back of the shank or used with an R47 collar.
Stainless Steel:
R-45SS-12
R-45SS-18
R-45SS-22
R-45SS-24
R-45SS-32
R-466SS
12” long
18” long
22” long
24” long
32” long
For broadcast
$ 9.98
$ 10.71
$ 11.45
$ 11.55
$ 12.92
$ 14.00
R47
R466SS
R-47 Injection tube set collars – collar and setscrew to allow injection tube
to be easily replaced or adjusted (2/Tube)
$ 4.10
R-48 FUMIGATION KNIFE – Frontswept forged steel knife with SS injection tube.
Overall length is 15”. Maximum knife penetration is 10” deep.
With Tube
$ 30.00
Without Tube
$ 19.00
R-49R KNIFE HOLDER - for square or rectangular toolbars. Bolts onto toolbar, adjustable
for various knife depths. Knives can be adjusted from 17” to 22”, the distance from bottom of
toolbar to the point. Includes bolts and straps.
$ 39.99
R-49D KNIFE HOLDER – for diamond shape toolbar
$ 43.05
R-49R Holder
R-48 Knife
Effective 2-15-11
9
R-FLO-MB-201
$770.00 as of 5/24/07
STD 0-100 PSI
Gauge
Includes everything shown here, complete N2
regulator & all hoses – hoses from manifold
& cylinder connector hoses
(For Mulch Layer)
R-302
Sight Glass
110-84
½” x ¼” Hex Pipe Bushing
(Reducing Bushing)
51-88
½” x ½” Flare Tee – Male Pipe Run
128-8
½” Street Tee – MPT on Drop
7080301
½” MxF Ball Valve
STD 0-100 PSI
Gauge
110-84
½” x ¼” Hex Pipe Bushing
(Reducing Bushing)
126-8
½” Male Pipe Elbow
102-4
¼”F x M 90° Street Elbow
127-4
¼” Street Tee – MPT on Run
½” ATW
Filter
7558 Forney
Manifold
7080101
¼” M x F Ball Valve
CP 1322
Manifold Outlets
139-44
¼” x ¼” Male Hose Barb
See Next Page for Pricing
Effective 2-15-11
10
R-FLO-MB-201
Item
102-4
110-84
126-8
127-4
128-8
139-44
51-88
7080101
7080301
CP-1322
Filter
Gauge
R-302
R-8284-N2-A
N2SS-4
FUMSS-4
FUMSS-8
Description
1/4" F x M -- 90° Street Elbow
1/2" x 1/4" Reducing Bushing
1/2" Male Pipe Elbow
1/4" Street Tee -- MPT on Run
1/2" Street Tee -- MPT on Drop
1/4" x 1/4" Male Hose Barb
1/2" x 1/2" Flare Tee -- Male Pipe Run
1/4" Male x Female Ball Valve
1/2" Male x Female Ball Valve
1/4" TT Brass Manifold Outlets
1/2" ATW Strainer
STD 0-100 PSI Gauge
Sight Glass
N2 Reg. Complete-NO HOSES
N2 Reg. Hose Assembly
Hose Line Assembly
Hose Line Assembly
Effective 2-15-11
Selling
Price
$1.85
$1.15
$6.30
$3.74
$10.03
$0.78
$9.02
$20.07
$20.07
$2.18
$95.60
$10.33
$155.00
$ 180.00
$ 34.43
$18.41
$36.00
Qty/Unit
Total
1
2
1
2
1
1
1
1
1
3
1
2
1
$1.85
$2.30
$6.30
$7.48
$10.03
$0.78
$9.02
$20.07
$20.07
$6.54
$95.60
$20.66
$155.00
0.00
$0.00
2
$ $ 72.00
11
HOSES FOR MULCH LAYER
(hoses from manifold & cylinder connector hoses)
3/8HPSS-8 Hose -4ft long w/ ends
MB-3251A
Cylinder Connector
MB-3521A
Cylinder Connector
3/8HPSS-8 Hose –
4ft long w/ ends
R-40
Manifold Outlet
MB-3251A Cylinder Connector w/ Valve & Hose Adapter
$26.89 each
FUMSS-8 Hose Line (From Chemical Cylinder To Sight Glasss)
Includes:
3/8” SS Braided Hose
(4ft per hose)
1108-1B 3/8” MNPT Rigid
(Qty 1 each per hose)
S-33B ½” Flare Swivel
(Qty 1 each per hose)
$36.00 each
R-40
Manifold Outlet
R-40 Manifold Outlet
1/4HPSS-4 Hose –
4ft long w/ ends
$5.50/ft
$6.00/end
$8.00/end
R-40 ML (optional 2,3 or 4 outlet)
Includes:
CP-1325 Brass Cap
$1.31 each
CP-4928 Brass Adapter
$8.23 each
5053-50-SS Brass Strainer
$2.76 each
CP-1322 ¼ TT Brass
$2.18 each
CP-4916 Orifice
$3.03each
(1 orifice per manifold outlet – 2,3 or 4)
FUMSS-4 Hose Line Assembly
Includes:
¼” SS Braided Hose
(4ft per hose)
1104-1B 1/8” MNPT Rigid
(Qty 1 each per hose)
S-30B ¼” Flare Swivel
(Qty 1 each per hose)
$18.41 each
$2.90/ft
$3.45/end
$3.36/end
1/4HPSS-4 Hose –
4ft long w/ ends
Effective 2-15-11
12
NITROGEN REGULATOR
R-8284-N2-A
Includes: 0-120 PSI Regulator, Ball
Valve, Check Valve, Blow Out Tube
& Connectors. NO HOSES
R-8284-N2 0-120 PSI
Nitrogen Regulator
116-4 -- ¼” Hex Nipple
7010101 -- ¼” FxF Ball Valve
S-30B
¼” Flare Swivel
112-4 ¼” Close Pipe Nipple
R-30034
Female N2 Quick Coupler
61-101-01 ¼” Check
Valve
51-44
¼” x ¼” Flare Tee
R-13-3
Male N2 Quick Coupler
1104-2B
R-30034
¼” MNPT Rigid
Female N2 Quick Coupler
R-13-3
Male N2 Quick Coupler
Blow Out Tube
S-30B
¼” Flare Swivel
1104-2B
¼” MNPT Rigid
1/4HPSS-4 Hose – 4ft long
1/4HPSS-4 Hose – 4ft long
Part
Description
N2 Regulator Complete -- Includes: Regulator, Hex Nipple,
R-8284-N2-A Ball Valve, Close Nipple, Check Valve, Tee & Blow Out Tube.
NO HOSES
0-120PSI N2 Regulator Only **included in complete assembly**
R-8284-N2
1/4" Hex Nipple **included in complete assembly**
116-4
1/4" Female X Female Ball Valve **included in complete assembly**
70-101-01
1/4" Close Nipple **included in complete assembly**
112-4
1/4" Check Valve **included in complete assembly**
61-101-01
1/4" Flare Tee -- Male Pipe Run **included in complete assembly**
51-44
N2 Blow Out Tube **included in complete assembly**
N2 Regulator Hose Assembly (Not Included)
N2SS-4
Effective 2-15-11
Selling
Price
Qty/
Unit
Total
$180.00
$150.00
$0.76
$16.81
$0.52
$38.26
$3.53
$5.50
$34.43
1
1
1
1
1
1
1
2
$150.00
$0.76
$16.81
$0.52
$38.26
$3.53
$5.50
$68.86
13
TELONE COUPLER
Part #: TEL-COU-110
49-88
½” x ½” Male Flare Elbow
(TEL-COU-110 LIQUID)
OR
49-48
¼” x ½” Male Flare Elbow
(TEL-COU-100-N2)
110-128
¾” x ½” Hex Pipe Bushing
(Reducing Bushing)
7010401
¾” Female x Female Ball Valve
113-1260
¾” x 6” Long Pipe Nipple
H6B-101
Female Quick Coupler
TEL-COU-110 LIQUID
49-88
110-128
7010401
2113-1260
H6B-101
TEL-COU-110
1/2" x 1/2" Male Flare Elbow
3/4" x 1/2" Hex Pipe Bushing -- Reducing Bushing
3/4" Female x Female Ball Valve
3/4" x 6" Long Pipe Nipple
Female Quick Coupler
Complete Assembly *** No Labor Included
$3.92
$1.92
$27.75
$2.40
$55.80
1
1
1
1
1
$3.92
$1.92
$27.75
$2.40
$55.80
$91.79
$4.36
$1.92
$27.75
$2.40
$55.80
1
1
1
1
1
$4.36
$1.92
$27.75
$2.40
$55.80
$92.23
TEL-COU-110-N2
49-48
110-128
7010401
2113-1260
H6B-101
TEL-COU-110
1/4" X 1/2" Male Flare Elbow
3/4" x 1/2" Hex Pipe Bushing -- Reducing Bushing
3/4" Female x Female Ball Valve
3/4" x 6" Long Pipe Nipple
Female Quick Coupler
Complete Assembly *** No Labor Included
Effective 2-15-11
14
Sight Glass to Flow Meter Conversion Kit
Item
49-86
Qty.
Needed
Description
1
1/2" x 3/8" Male Flare Elbow
Selling Price
$
3.20
$
Total
3.20
60-902-01
110-86
1
1
Needle Valve
1/2" x 3/8" Hex Bushing
$
$
50.00
0.98
$
$
50.00
0.98
100-8
2113-840
102-8
Filter
70-801-01
1
2
1
1
1
1/2" Female Pipe 90 Degree Elbow
1/2" x 4" Long Pipe Needle
1/2" x 1/2" Street Elbow
1/2" ATW Strainer
1/4" Male x Female Ball Valve
$
$
$
$
$
5.85
29.58
5.51
95.60
20.07
$
$
$
$
$
5.85
59.16
5.51
95.60
20.07
139-44
1
1/4" x 1/4" Male Hose Barb
$
0.78
$
0.78
1/2" x 1/4" Hex Bushing
1/2" Street Tee-MPT on Run
1/2" x 1/2" Male Flare Elbow
STD 0-100 PSI Gauge
Flow Meter Only
3/8" Close Pipe Nipple
Two Bracket Set With Bolts and Nuts
3/8" High Pressure Stainless Steel
1/2" MNPT Rigid
1/2" Flare Swivel
$
$
$
$
$
$
$
$
$
$
1.15
10.91
3.92
10.33
950.00
0.71
126.00
5.50
7.00
8.00
$
$
$
$
$
$
$
$
$
$
2.30
21.82
3.92
10.33
950.00
0.71
126.00
24.75
14.00
16.00
110-84
127-8
49-88
Gauge
MB-PIC-FM
112-6
Bracket
3/8HPSS-8
1108-2B
S-33B
2
2
1
1
1
1
1
4.5
2
2
Total:
Effective 2-15-11
$
1410.98
15