PING-TENG CHANG
Tunghai University
Department of Industrial Engineering and Enterprise Information
Taichung 407, Taiwan, ROC
Tel: +886-4-23594319 ext. 123; Fax: +886-4-23591756
E-mail: ptchang@ie.thu.edu.tw
EDUCATION

Ph.D. Industrial Engineering - 1994; Kansas State University, Chairperson: Dr. E. Stanley Lee
Dissertation Title: Fuzzy Regression Analysis

M.S. Industrial Engineering - 1990; Kansas State University

Chemical Engineering - 1981; National Taipei Institute of Technology
ACADEMIC EXPERIENCE
2004/112008/10
Editor-in-Chief, International Journal of Operations Research
2004/8  2007/7
Chairman, Department of Industrial Engineering and Enterprise Information,
Tunghai University
2003/9  2005/11
President, Operations Research Society of Taiwan
2003/1  2005/11
President, INFORMS Taiwan Chapter
2001/8  Present
Professor, Department of Industrial Engineering and Enterprise Information,
Tunghai University
1996/8  2001/7
Associate Professor, Department of Industrial Engineering, Tunghai University
1994/8  1996/7
Associate Professor, Department of Industrial Management & Institute of
Management Science, I-Shou University
INDUSTRIAL EXPERIENCE
1987  1988
Associate Manager / Quality Control Dept., Associate Manager / Engineering
Dept., Lite-On Inc. (PCB manufactures)
(Develop multi-layer PCB production, strengthen functions of Lab, plan and
organize quality plan and education and training. Raise the production
percentage of multi-layer PCB to 30% from 5%.)
Ping-Teng Chang
1983  1987
Supervisor and Chief Quality Engineer / QC Dept., Supervisor / Production
Dept., Engineer / R/D Dept., Process Engineer / Engineering Dept., Ko Sheng
Enterprises Co., Ltd. (PCB manufactures)
PRINCIPLE AREAS OF TEACHING AND RESEARCH
TEACHING






Production and Operations Management (Graduate, Undergraduate)
Automated Production Systems (Undergraduate)
Operations Research (Graduate, Undergraduate)
Decision Making (Graduate)
Decision Support Systems (Graduate)
Fuzzy Set Theory and Applications (Graduate)
RESEARCH







Production Management and Manufacturing Planning and Control
Systems (Flexible Manufacturing Systems, Group Technology, ComputerAided Process Planning, etc.)
Supply Chain Management (Multi-site Production Planning)
Fuzzy Set Theory (fuzzy Arithmetic, Fuzzy Ranking, Fuzzy Regression,
Fuzzy Multiple Criteria Decision Making, Fuzzy Decision Networks,
Fuzzy Delphi Method, Fuzzy Analytic Hierarchy Process, Fuzzy System
Dynamics, Fuzzy Classifiers System, Applications, etc.)
Intelligent Algorithms (Genetic Algorithms, Ant Colony Optimization,
Evolutionary Algorithms, Tabu Search, Simulated Annealing, Harmony
Search, Hybrids, Applications, etc.)
Forecasting and Product Life Cycle Modeling (Fuzzy Forecasting, PLC
Models)
Scheduling Theory (Various Shop Scheduling, Parallel-machine
Scheduling, Rescheduling, Multi-objective Scheduling, etc.)
Inventory Models (Various Inventory/Lot-sizing Models)
RESEARCH
REFEREED JOURNAL PAPERS AND BOOK PAPERS

Lin, K.-P., Chang, P.-T., Hung, K.-C., and Pai, P.-F., 2009, “A Simulation of Vendor Managed
Inventory Model Using Fuzzy Arithmetic Operations with Genetic Algorithms,” Expert
Systems with Applications, in print. [SCI] (NSC 97-2410-H-262 -006)

Chang, P.-T., Lin, K.-P., Lin, C.-S., Hung, K.-C., Hung, L.-T., and Hsu, B.-D., 2009,
“Developing a Fuzzy Bicluster Regression to Estimate Heat Tolerance in Plants by
Chlorophyll Fluorescence,” IEEE Transactions on Fuzzy Systems, Vol. 17, No. 3, June, pp. 485–
504. [SCI, EI] (NSC 94-2213-E-029-008)

Pai, P.-F., Yang, S.-L., and Chang, P.-T., 2009, “Forecasting Output of Integrated Circuit
Industry by Support Vector Regression Models with Marriage Honey-bees Optimization
Algorithms,” Expert Systems with Applications, Vol. 36, pp. 10746–10751. [SCI] (NSC 96-2628-E260-001-MY3)
Ping-Teng Chang

Chang, P.-T., Lee, J.-H., Hung, K.-C., Tsai, J.-T., and Perng, C., 2008, “Applying Fuzzy
Weighted Average Approach to Evaluate Office Layouts with Feng-Shui Consideration,”
Mathematical and Computer Modelling, in print. [SCI, EI]

Chang, P.-T., Lin, K.-P., Pai, P.-F., Zhong, C.-Z., Lin, C.-H., and Hung, L.-T., 2008, “Ant
Colony Optimization System for a Multi-quantitative and Qualitative Objective Job-shop
Parallel-machine-scheduling Problem,” International Journal of Production Research, Vol. 46, No.
20, October, pp. 5719–5759. [SCI, EI] (NSC 92-2213-E-029-007)

Perng, C., Chang, P.-T., Lin, S.-S., Huang, C.-C., and Ho, Z.-P., 2008, “Optimizing Multi-Site
Production Planning and Scheduling with a Hybrid Genetic Algorithm,” International Journal
of Management Theory and Practices, Vol. 9, No. 1, August, pp. 5–20.

Pai, P.-F., Lin, K.-P., and Chang, P.-T., 2007, “Potential Assessment of an Ellipsoidal Neural
Fuzzy Time Series Model for Freeway Traffic Prediction,” Lecture Notes in Computer Sciences,
Vol. 4431, pp. 631–639. [SCI]

Chang, P.-T., Hung, K.-C., Lin, K.-P., and Chang, C.-H., 2006, “A Comparison of Discrete
Algorithms for Fuzzy Weighted Average,” IEEE Transactions on Fuzzy Systems, Vol. 14, No. 5,
pp. 663-675. [SCI, EI] (NSC 91-2213-E-029-018)

Chang, P.-T. and Hung, K.-C., 2006, “-Cut Fuzzy Arithmetic: Simplifying Rules and a Fuzzy
Function Optimization with a Decision Variable,” IEEE Transactions on Fuzzy Systems, Vol. 14,
No. 4, pp. 496-510. [SCI, EI] (NSC 91-2213-E-029-018)

Chang, P.-T., Pai, P.-F., Lin, K.-P., and Wu, M.-S., 2006, “Applying Fuzzy Arithmetic to
System Dynamics for the Customer-Producer-Employment Model,” International Journal of
Systems Science, Vol. 37, No. 10, pp. 673-698. [SCI, EI] (NSC 91-2213-E-029-018)

Chang, P.-T. and Chang, C.-H., 2006, “An Elaborative Unit Cost Structure-based Fuzzy
Economic Production Quantity Model,” Mathematical and Computer Modelling, Vol. 43,
pp.1337-1356. [SCI, EI]

Chang, P.-T., Yao, M.-J., Huang, S.-F., and Chen, C.-T., 2006, “A Genetic Algorithm for
Solving a Fuzzy Economic Lot-size Scheduling Problem,” International Journal of Production
Economics, Vol. 102, pp. 265-288. [SCI, EI] (NSC 90-2218-E-029-008, NSC 90-2218-E-029-009)

Pai, P.-F., Hong, W.-C., Chang, P.-T., and Chen, C.-T., 2006, “The Application of Support
Vector Machines to Forecast Tourist Arrivals in Barbados: An Empirical Study,” International
Journal of Management, Vol. 23, pp. 375-385. [SSCI, SCI] (NSC 92-2213-E-212-001, NSC 93-2213-E212-001)

Hong, W.-C., Pai, P.-F., Chen, C.-T., and Chang, P.-T., 2005, “Recurrent Support Vector
Machines in Reliability Prediction,” Lecture Notes in Computer Sciences, Vol. 3610, pp. 619-629.
[SCI] (NSC 92-2213-E-212-001, NSC 93-2213-E-212-001)

Chang, P.-T. and Hung, K.-C., 2005, “Applying the Fuzzy-Weighted-Average Approach to
Evaluate Network Security Systems,” Computers and Mathematics with Applications, Vol. 29, pp.
1797-1814. [SCI, EI]
Ping-Teng Chang

Yao, M.-J., Chang, P.-T., and Huang, S.-F., 2005, “On the Economic Lot Scheduling Problem
with Fuzzy Demands,” International Journal of Operations Research, Vol. 2, No. 2, pp. 58-71.
(NSC 89-2213-E-029-029)

Pai, P.-F., Chang, P.-T., Lin, K.-P., and Hong, W.-C., 2005, “Hybrid Learning Fuzzy Neural
Models in Stock Price Forecasting,” Journal of Information & Optimization Sciences, Vol. 26, No.
3, pp. 495-508. [EI]

Pai, P.-F., Chang, P.-T., and Lee, S.-Y., 2005, “Part-machine Family Formation Using Genetic
Algorithms in a Fuzzy Environment,” International Journal of Advanced Manufacturing
Technology, Vol. 25, No. 11-12, pp. 1175-1179. [SCI, EI] (NSC 92-2213-E-212-001)

Chang, P.-T., 2005, “Fuzzy Strategic Replacement Analysis,” European Journal of Operational
Research, Vol. 160, pp. 532-559. [SCI, EI] (NSC 86-2213-E-029-009)

Chang, P.-T., Chang, C.-H., and Chen, C.-T., 2004, “An Extension of the Multi-machine Multilevel Proportional Lot Sizing and Scheduling Model for Product-life-cycle Demands,”
International Journal of Operations Research, Vol. 1, pp. 11-22. (NSC 90-2218-E-029-009)

Pai, P.-F., Chang, P.-T., Wang, S.-S., and Lin, K.-P., 2004, “A Fuzzy Logic-based Approach in
Capacity-planning Problems,” International Journal of Advanced Manufacturing Technology, Vol.
23, pp. 806-811. [SCI, EI] (NSC91-2213-E-212-003)

Chang, P.-T. and Chang, C.-H., 2003, “A Stage Characteristic-Preserving Product Life Cycle
Modeling,” Mathematical and Computer Modelling, Vol. 37, pp. 1259-1269. [SCI, EI] (NSC 892213-E-029-013)

Chang, P.-T., Liu, C.-H., Lo, Y.-T., and Szu, Y.-J., 2003, “Fuzzy Message Requirement
Classifiers System and an Application to the IC Test Machine DiagnosticsI,” Journal of the
Chinese Institute of Industrial Engineers, Vol. 20, No. 2, pp. 113-124. (2004 Paper Award of the
Chinese Institute of Industrial Engineers) [EI] (NSC 88-2213-E-029-008)

Chang, P.-T., 2002, “Fuzzy Stage Characteristic-Preserving Product Life Cycle Modeling,”
Fuzzy Sets and Systems, Vol. 126, pp. 33-47. [SCI, EI] (NSC 89-2213-E-029-013)

Chang, P.-T. and Lo, Y.-T., 2001, “Modeling of Job-Shop Scheduling with Multiple
Quantitative and Qualitative Objectives and a GA/TS Mixture Approach,” International
Journal of Computer Integrated Manufacturing, Vol. 14, pp. 367-384. [SCI, EI] (NSC 89-2213-E-029012)

Huang, L.-C., Hsieh, S.-Y., and Chang P.-T., 2001, “A Comparison of Fuzzy Delphi Methods
with an Application to Assessment Factor Selection for Bank Employees,” Journal of the
Chinese Institute of Industrial Engineers, Vol. 18, pp. 74-86. [EI] (NSC 86-2416-H-214-001)

Chang, P.-T., Chang, C.-H., and Jong, T.-P., 2001, “A Dynamic Unit Cost Based Economic
Production Quantity Model with Fuzzy JIT Concept,” Journal of the Chinese Institute of
Industrial Engineers, Vol. 18, pp. 9-20. [EI]

Chang, P.-T., 2001, “A Study of a Two-Stage Fuzzy Multi-objective Hybrid Genetic Algorithm
Job-Shop Scheduling System Approach,” Engineering & Applied Science Letters, No. 55,
National Science Council of Taiwan, Engineering & Applied Science Division. (NSC 89-2213-E029-012)
Ping-Teng Chang

Chang, P.-T. and Chang, C.-H., 2000, “An Integrated Artificial Intelligent Computer-Aided
Process Planning System,” International Journal of Computer Integrated Manufacturing, Vol. 13,
pp. 483-497. [SCI, EI] (NSC 87-2213-E-029-009)

Chang, P.-T., Huang, L.-C., and Lin, H.-J., 2000, “The Fuzzy Delphi Method via Fuzzy
Statistics and Membership Function Fitting and an Application to the Human Resources,”
Fuzzy Sets and Systems, Vol. 112, pp. 511-520. [SCI, EI] (NSC 86-2416-H-214-001)

Chang, P.-T. and Lee, E.S., 2000, “A Multi-Solution Method for Cell FormationExploring
Practical Alternatives in Group Technology Manufacturing,” Computers and Mathematics with
Applications, Vol. 40, pp. 1285-1296. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1999, “Fuzzy Decision Networks and Deconvolution”, Computers
and Mathematics with Applications, Vol. 37, pp. 53-63. [SCI, EI]

Chang, P.-T., 1997, “Fuzzy Seasonality Forecasting,” Fuzzy Sets and Systems, Vol. 90, pp. 1-10.
[SCI, EI]

Huang, L.-C., Chang, P.-T., and Lin, H.-J., 1997, “The Fuzzy Managerial Talent Assessment
Model,” Pan-Pacific Management Review, Vol. 1, pp. 71-83.

Ben-Arieh, D., Lee, E.S., and Chang, P.-T., 1996, “Fuzzy Part Coding for Group Technology,”
European Journal of Operational Research, Vol. 92, pp. 637-648. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1996, “A Generalized Fuzzy Weighted Least Squares Regression,”
Fuzzy Sets and Systems, Vol. 82, pp. 289-298. [SCI, EI]

Chang, P.-T., Lee, E.S., and Konz, S.A., 1996, “Applying Fuzzy Linear Regression to VDT
Legibility,” Fuzzy Sets and Systems, Vol. 80, pp. 197-204. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1995, “The Estimation of Normalized Fuzzy Weights,” Computers
and Mathematics with Applications, Vol. 29, pp. 21-42. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1994, “Fuzzy Least Absolute Deviations Regression and the
Conflicting Trends in Fuzzy Parameters,” Computers and Mathematics with Applications, Vol. 28,
pp. 89-101. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1994, “Fuzzy Linear Regression with Spreads Unrestricted in
Sign,” Computers and Mathematics with Applications, Vol. 28, pp. 61-70. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1994, “Ranking of Fuzzy Sets based on the Concept of Existence,”
Computers and Mathematics with Applications, Vol. 27, pp. 1-21. [SCI, EI]

Ben-Arieh, D. and Chang, P.-T., 1994, “An Extension of the p-median Group Technology
Algorithm,” Computers & Operations Research, Vol. 21, pp. 119-125. [SCI, EI]

Chang, P.-T. and Lee, E.S., 1994, “Fuzzy Arithmetic and Comparison of Fuzzy Numbers,” in
Fuzzy Optimization: Recent Advances, edited by M. Delgado et al., Omnitech Press.

Chang, P.-T. and Lee, E.S., 1993, “Fuzzy Decision Making: A Survey,” in Between Mind and
Computer: Fuzzy Science and Engineering, edited by P.Z. Wang and K.F. Loe, World Scientific
Publishing, Singapore, pp. 139-182.
Ping-Teng Chang

Chang, P.-T. and Konz, S., 1993, “Character Size vs Viewing Distance on VDTs,” in Work with
Display Units 92, edited by H. Luczak, A. Cakir and G. Cakir, Elsevier, pp. 143-147.
JOURNAL PAPERS UNDER REVIEW

Chang, P.-T., Kang, T., Chen, Y.-C., and Lin, Y.-W., 2007, “Application of Genetic Algorithm
to Aggressive Win-win Pricing Model for the Multi-generation Products,” submitted to
Decision Support Systems.

Chang, P.-T., Lee, H.-H., Chang, C.-H., and Hung, K.-C., 2007, “A Multi-simplexes and
Genetic Algorithm Hybrid Method,” submitted to European Journal of Operational Research. (1st
revision)
CONFERENCE PROCEEDINGS PAPERS

Chang, P.-T., Wu, J.-S., and Tsai, C.-C., 2008, “System Dynamics Applied in Capacity and
Demand BalancingA Case Study of Wafer Fabrication Factory,” The 16th National
Conference on Fuzzy Theory and Its Applications, Chung Li, Taiwan, December 20.

Pai, P.-F., Yang, S.-L., Huang, C.-C., and Chang, P.-T., 2008, “Application of Ontology and
Directed Acyclic Graph Support Vector Machine in Patent Classification,” 2008 Annual
Meeting of Chinese Institute of Industrial Engineers, Chung Li, Taiwan, December 13.

Chang, P.-T., Hsieh, M.-Y., and Tseng, P.-S., 2008, “An Origin-Destination Fare Differentiation
and Discount Model by Example of Taiwan High-Speed Rail,” 2008 Annual Meeting of
Chinese Institute of Industrial Engineers, Chung Li, Taiwan, December 13.

Chang, P.-T., Chang, C.-H., and Yang, S.-I., 2008, “A Study of DVD Diskette Malfunction
Monitoring,” 2008 Annual Meeting of Chinese Institute of Industrial Engineers, Chung Li,
Taiwan, December 13.

Chang, P.-T., Yang, W.-Y., and Tu, M.-F., 2008, “A Study of Fuzzy Set Theory in Triangulation
Position Estimation–for Zigbee,” 2008 Workshop on Consumer Electronics, Taipei, Taiwan,
December 5.

Chang, P.-T., Chen, C.-Y., and Chen, C.-Y., 2008, “A Study of Multi-Site Production
Assignment and Scheduling System with Order Contributivity Considered Multi-Objectives,”
The 13th Conference on Artificial Intelligence and Applications, Ilan, Taiwan, November 21.

Chang, P.-T., Chen, J.-Y., and Chen, S.-Y., 2008, “A Study of Fuzzy Game Theory Applied in
Selection of Competition Strategy for High-Speed Rail, Railway, and Air lines,” 2008 Ninth
Conference on Sustaining Development Management, Pingtung, Taiwan, April 25.

Chang, P.-T., Kung, C.-M., and Liu, G.-T., 2008, “A Study of System Dynamics Applied in
Production Control and Capacity Planning of Wafer Fabrication–The Case Study of BackEnd-of-the-Line,” 2008 Ninth Conference on Sustaining Development Management, Pingtung,
Taiwan, April 25.
Ping-Teng Chang

Chang, P.-T., Ku, C.-C., and Lee, Y.-L., 2007, “A Study of Orthogonal Quasi-Gradient Search
Algorithm,” The 12th Conference on Artificial Intelligence and Applications, Yunlin, Taiwan,
November 16-17.

Chang, P.-T. and Lin, K.-P., 2007, “Study of Fuzzy Arithmetic and Fuzziness Accumulation
Controlling Method for System Dynamics with Fuzzy Arithmetic,” Fourth Conference of
Operations Research Society of Taiwan and 2007 Operations Research Theory and Practice
Conference, Hualien, Taiwan, October 26-27.

Chang, P.-T., Chiang, H.-C., and Chiu, Y.-T., 2007, “A Study of Repeated Purchase and
Innovation Diffusion for Multi-generation Products,” Fourth Conference of Operations
Research Society of Taiwan and 2007 Operations Research Theory and Practice Conference,
Hualien, Taiwan, October 26-27.

Chang, P.-T., Juan, Y.-C., and Chuang, W.-C., 2007, “A Study of Multi-objective and TOC
Driven Job-shop Production Scheduling,” Fourth Conference of Operations Research Society
of Taiwan and 2007 Operations Research Theory and Practice Conference, Hualien, Taiwan,
October 26-27.

Perng, C., Chang, P.-T., Ho, Z.-P., and Huang, C.-C., 2007, “Optimization of Multi-site
Integrated Production Assignment and Scheduling System,” ACME Transactions, Las Vegas,
Nevada, USA, July 12-14, pp. C39_34-C.39_41.

Chang, P.-T., Chen, S.-C., and Shie, M.-Y., 2006, “A Study of Analysis of Multi-generation
Product Diffusion Pricing Models for DRAM,” 2006 Annual Meeting of Chinese Institute of
Industrial Engineers, Taichung, Taiwan., December 23.

Chang, P.-T., Pan, G.-C., and Wu, J.-S., 2006, “A Study of Multi-objective Parallel-machine Job
Shop Rescheduling,” 2006 Annual Meeting of Chinese Institute of Industrial Engineers,
Taichung, Taiwan, December 23.

Chang, P.-T., Shyue, D.-H., and Wu, J.-S., 2006, “A GA/Tabu Search for Multiple Sequence
Alignment in Computational Biology,” The 3rd Annual Conference of Operations Research
Society of Taiwan 2006, Nei-Li, Taiwan, November 18.

Chang, P.-T., Chen, S.-C., and Chang, C.-H., 2006, “A Study of Analysis of Multi-generation
Product Diffusion Pricing Models for CPU,” The 3rd Annual Conference of Operations
Research Society of Taiwan 2006, Nei-Li, Taiwan, November 18.

Chang, P.-T., Guo, J.-S., and Chen, J.-Y., 2006, “An Orthogonal Harmony Search for Function
Optimization,” The 11th Conference on Artificial Intelligence and Applications, Kaohsiung,
Taiwan, December 15-16.

Hong, W.-C., Yang, S.-L., Pai, P.-F., and Chang, P.-T., 2006, “Combining Meta-heuristic and
Support Vector Machines in Predicting the Protein Structure,” 2006 Int'l Conference on New
Global Management Environment, Changhua, Taiwan, September 21.

Chang, P.-T., Hung, L.-T., Lin, K.-P., Lin, C.-S., and Hung, K.-C., 2006, “Protein Sequence
Alignment based on Fuzzy Arithmetic and Genetic Algorithm,” FUZZ-IEEE 2006, Vancouver,
Canada, September 7-9. [EI] (NSC 94-2213-E-029-008)
Ping-Teng Chang

Chang, P.-T., Perng, C., Huang, C.-C., and Chen, C.-Y., 2005, “Optimization of Multi-site
Integrated Production Assignment and Scheduling System,” 2005 Annual Meeting of Chinese
Institute of Industrial Engineers, Hsinchu, Taiwan, December 17. (NSC 93-2213-E-029-004)

Chang, P.-T., Lee, W.-S., and Ku, C.-C., 2005, “Application of Duopoly Game Theory to the
Pricing of Diffusion Model for Multi-generations Products–DRAM Products as an Example,”
2005 Annual Meeting of Chinese Institute of Industrial Engineers, Hsinchu, Taiwan,
December 17. (NSC 93-2213-E-029-005)

Chang, P.-T., Cheng T.-J., Lin, K.-P., and Gung, C.-M., 2005, “Application of Fuzzy Set Theory
and Hybrid Genetic Algorithm to Gene Sequence Alignment Problems,” The 13th National
Conference on Fuzzy Theory and Its Applications, Kaohsiung, Taiwan, September 30.

Chang, P.-T., Kuo, W.-W., and Hong, L.-T., 2005, “Quasi Gradient Search Evolution Strategy
Method,” The 10th Conference on Artificial Intelligence and Applications, Kaohsiung,
Taiwan, December 2-3.

Chang, P.-T., Huang, J.-C., Hung, K.-C., Lin, K.-P., and Juan, Y.-C., 2005, “Study of Power
Load Forecasting System Modeling with a Parallel Neural Network,” The 2nd Annual
Conference of Operations Research Society of Taiwan 2005, Taipai, Taiwan, November 4.

Chang, P.-T., Lin, J.-J., Hong, L.-T., and Kuo, C.-H., 2005, “Diffusion-modeled Multigeneration Product Pricing and Advertisement Budgeting System,” 2005 Conference on
Management Innovation and New Vision, Taipei, Taiwan, May 13. (NSC 92-2213-E-029-005)

Chang, P.-T. and Hung, K.-C., 2004, “A High Efficient Algorithm for Fuzzy Weighted
Average,” The Fifth Asia-Pacific Industrial Engineering and Management Systems
Conference & The Seventh Asia-Pacific Division Meeting of the International Foundation of
Production Research, Queensland, Australia, December 12-15.

Chang, P.-T., Lin, K.-P., and Pai, P.-F., 2004, “Hybrid Learning Fuzzy Neural Models in
Forecasting Engine System Reliability,” The Fifth Asia-Pacific Industrial Engineering and
Management Systems Conference & The Seventh Asia-Pacific Division Meeting of the
International Foundation of Production Research, Queensland, Australia, December 12-15.

Chang, P.-T., Zhong, C.-Z., Hung, K.-C., and Hung, L.-T., 2004, “An ACO to Multi-objective
Job-shop Parallel-machine Scheduling,” The Conference on Science and Management, Taipei,
Taiwan, November 12. (NSC 92-2213-E-029-007)

Chang, P.-T. and Hung, K.-C., 2004, “A Study for Simplifying Rules of -cut Fuzzy
Arithmetic,” The Conference on Science and Management, Taipei, Taiwan, November 12.

Pai, P.-F., Chang, P.-T., and Lin, C.-S., 2004, “Modified SVMs Model in Forecasting System,”
The Twelfth National Conference on Fuzzy Theory and Its Applications, Ilan, Taiwan,
November 12-13.

Chang, P.-T., Pai, P.-F., Lin, K.-P., and Wu, M.-S., 2004, “Applying Fuzzy Arithmetic to the
System Dynamics for the Customer-producer-employment Model,” The Twelfth National
Conference on Fuzzy Theory and Its Applications, Ilan, Taiwan, November 12-13.

Chang, P.-T., Chang, C.-H., Lee, H.-H., and Hung, K.-C., 2004, “A Hybrid Multi-simplexes
Genetic Algorithms Method,” International Conference on Analysis and Its Applications,
Changhua, Taiwan, May 28-30.
Ping-Teng Chang

Chang, P.-T., Lin, Y.-W., and Huang, C.-C., 2003, “Aggressive Win-win Pricing Modeling for
PLC-based Multi-generation products,” 2003 Annual Meeting of Chinese Institute of
Industrial Engineers, Taiwan. (NSC 91-2213-E-029-009)

Chang, P.-T. and Chang, C.-H., 2003, “Finding Roots by Genetic Algorithm,” The Joint
Conference on AI, Fuzzy System, and Grey System, Taipei, Taiwan, December 4-5.

Chang, P.-T., Lin, C.-H., and Kuo, W.-W., 2003, “Study of Modeling and System of Multistage
Parallel Machine Job-shop Multi-objective Scheduling,” 2003 Annual Meeting of Chinese
Institute of Industrial Engineers, Taiwan. (NSC 91-2213-E-029-018)

Chang, P.-T., Lee, H.-H., and Chang C.-H., 2003, “Cooperative Search,” Fourth International
Conference on Operations and Quantitative Management (ICOQM), Taiwan.

Chang, P.-T., Chang, C.-H., and Liao, C.-W., 2003, “A Preceding Collaborative Forecasting
Architecture and Implement System Study,” 2003 International Conference on Electronic
Business Management, Taichung, Taiwan, July 12, No. 108.

Chang, P.-T., Chang, C.-H., and Wu, M.-C, 2002, “Product Life Cycle based Collaborative
Product Design System with IC Industrial Application,” 2002 1st Conference of Knowledge
Management and Collaborative Planning, Taiwan, October 12, A104.

Chang, P.-T., Chen, C.-T., and Chang, C.-H., 2002, “University Campus Broadcast Application
Case 3Tunghai Digital Village: Electronic Commercial Network,” 2002 Conference of
Electronic Commerce and Digital Life, Taiwan, E050.

Chang, P.-T. and Chung, K.-C., 2001, “Supply-chain Production Assignment and Scheduling
SystemA Cooperation Model based on Petri-net and Genetic Algorithm,” 2001 Annual
Meeting of Chinese Institute of Industrial Engineers, Kaohsiung, Taiwan, December 8, A06-2.

Chang, P.-T. and Chen, C.-J., 2001, “Supply-chain Production Assignment and Planning
SystemMulti-agent Cooperative-and-competitive Model and Fuzzy Integrated Evaluation
Mechanism,” The Ninth National Conference on Fuzzy Theory and Its Applications, Chungli,
Taiwan, November 23-34, p. 89. (NSC 89-2213-E-029-031)

Chang, P.-T. and Chang, C.-H., 2001, “An Elaborative Unit Cost Structure-based Fuzzy
Economic Production Quantity Model,” OR 43 Annual Conference, Bath, UK, September 4-6.
(NSC 89-2213-E-029-031)

Chang, P.-T., 2000, “A Fuzzy Product Life Cycle Modeling with Stage Characteristicpreserving Capability,” The Third Asia-Pacific Conference on Industrial Engineering and
Management Systems, APIEMS’2000, Hong Kong, December 20-22, pp. 184-189.

Chang, P.-T., Pai, P.-F., and Chuang, H.-W., 2000, “Flexible Multiple Criteria Group
Technology and Cellular Manufacturing Scheduling System,” International Workshop on
Intelligent Systems Resolutions, The 8th Bellman Continuum, Hsinchu, Taiwan, December
11-12, pp. 40-43.

Chang, P.-T., Lo, Y.-T., and Chang, C.-H., 2000, “A GA/TS Method for Job-shop Scheduling
with Multiple Qualitative and Quantitative Objectives and Fuzzy Data,” International
Workshop on Intelligent Systems Resolutions, The 8th Bellman Continuum, Hsinchu, Taiwan,
December 11-12, pp. 301-306.
Ping-Teng Chang

Chang, P.-T. and Chang, C.-H., 2000, “A Product Life Cycle Modeling with Stage
Characteristic-preserving Capability,” The 5th Annual International Conference of Industrial
Engineering Theory, Applications & Practice, Hsinchu, Taiwan, December 13-15.

Chang, P.-T., Pai, P.-F., Hsio, J.E., and Hong, J.-C., 2000, “A Decision Support System for
Cellular Manufacturing Systems Considering Seasonal Factors,” The Conference of Decision
Analysis Approaches and Applications, Taipei, May, pp. 419-438.

Chang, P.-T. and Kuo, C.-C., 2000, “Overall Diffusion and Neural Network Product-life-cycle
Models,” Fifth Conference on Artificial Intelligence and Applications, Taipei, Taiwan,
November 17, pp. 255-262.

Chang, P.-T., Hsieh, C.-F., and Hsiao, C.-A., 1999, “Design and Implementation of an
Integrated Multi-stage Dynamic Cellular Manufacturing System,” 1999 Annual Meeting of
Chinese Institute of Industrial Engineers, Taiwan, p. 169.

Chang, P.-T. and Jong, T.-P., 1999, “A Study of Dynamic Feedback Analysis Forecasting
System,” 1999 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, p. 249.

Chang, P.-T. and Chang, C.-H., 1999, “Strategic Product Life Cycle Forecasting System,” 1999
Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, p. 301.

Chang, P.-T., 1999, “Fuzzy Strategic Replacement Analysis,” Eighth International Fuzzy
Systems Association World Congress, Taipei, Taiwan, August 16-20, pp. 833-837.

Chang, P.-T. and Lo, Y.-T., 1999, “A Study of Fuzzy Multi-objective Hybrid Genetic
Algorithm Job-shop Scheduling System Approach,” The 1999 Conference on Production
Scheduling: Theory and its Applications, Hsinchu, Taiwan, June 25, pp. A-39-A-46.

Chang, P.-T., Liu, C.-H., and Lo, Y.-T., 1998, “Fuzzy Message Requirement Classifier System:
A Case Study of IC Test Machine Diagnosis Problem,” 1998 Annual Meeting of Chinese
Institute of Industrial Engineers, Taiwan, pp. 691-696.

Chang, P.-T., Chang, C.-H., and Jong, T.-P., 1998, “An Integrated Dynamic Adaptive-learning
Artificial Intelligent Computer-aided Process Planning System,” 1998 Annual Meeting of
Chinese Institute of Industrial Engineers, Taiwan, pp. 181-186.

Chang, P.-T., Chang, C.-H., and Jong, T.-P., 1998, “A Dynamic Unit Cost based Economic
Production Quantity Model with Fuzzy JIT Concept,” 1998 Annual Meeting of Chinese
Institute of Industrial Engineers, Taiwan, pp. 52-57.

Chang, P.-T., Chuang, H.-W., and Hsieh, C.-F., 1998, “Flexible Multi-grouping and Multicriteria Group Technology and Cellular Manufacturing Scheduling System,” Sixth National
Conference on Fuzzy Theory and Its Applications, Taiwan, p. 13.

Huang, L.-C., Chang, P.-T., and Chen, Y.-J., 1998, “A Study of Importance Level Perception of
Promotion Indices of Performance by Employer and EmployeeA Case Study of
Manufacturing Industry,” Conference on Technology and Applications of Quality &
Management for Twenty First Century (1998), Taiwan, pp. 555-564.

Huang, L.-C., Chang, P.-T., and Chen, Y.-J., 1997, “A Study of Fuzzy Theory Applied to
Selection of Corporate Managerial Talent,” Fifth National Conference on Fuzzy Theory and
Its Applications, Taiwan, pp. 185-190.
Ping-Teng Chang

Huang, L.-C., Chang, P.-T., and Hsieh, S.-Y., 1997, “Construction of Fuzzy Assessment Model
for Bank Employee Recruitment and Case Comparison and Analysis,” 1997 Annual Meeting
of Chinese Institute of Industrial Engineers, Taiwan, pp. 1006-1011.

Chang, P.-T. and Huang, L.-C., 1997, “The Fuzzy Delphi Method and Fuzzy Statistics,” 5th
European Congress on Intelligent Techniques and Soft Computing, Aachen, Germany,
September 8-11, pp. 168-172.

Huang, L.-C., Chang, P.-T., and Chen, Y.-J., 1997, “Fuzzy Theory Applied to Analysis of
Employing Criteria of Manufacturing Industry Personnel,” Conference on Technology and
Applications of Quality & Management for Twenty First Century, Taiwan, pp. 506-517.

Huang, L.-C., Chang, P.-T., and Hsieh, S.-Y., 1997, “A Study of Applying Fuzzy Delphi
Method to Assessment Items of Bank Employee Recruitment,” Conference on Technology
and Applications of Quality & Management for Twenty First Century, Taiwan, pp. 495-505.

Huang, L.-C., Chang, P.-T., and Lin, H.-J., 1996, “A Study of Fuzzy Assessment Model for
Managerial Talent,” 1996 IEEE International Conference on Systems, Man and Cybernetics,
Beijing, China, October 14-17, pp. 400-405.

Chang, P.-T. and Wang, C.-T., 1996, “Fuzzy Model for Replacement AnalysisA Pilot Study,”
1996 Annual Meeting of Chinese Institute of Industrial Engineers, Taiwan, pp. 121-128.

Huang, L.-C., Chang, P.-T., and Lin, H.-J., 1996, “Application of Fuzzy Delphi Method to
Assessment Factor Analysis for Managerial Talent,” Conference on Technology and
Applications of Quality & Management for Twenty First Century, Taiwan, pp. 393-402.

Chang, P.-T. and Lee, E.S., 1994, “Fuzzy Least Absolute Deviations Regression based on the
Ranking of Fuzzy Numbers,” IEEE Conference on Fuzzy Systems at 1994 World Congress on
Computational Intelligence, Orlando, Florida, June 26-29.

Lee, E.S. and Chang, P.-T., 1993, “Fuzzy Linear Regression with Conflicting Trends,” First
Asian Fuzzy Systems Symposium, Singapore, November 23-26.

Chang, P.-T. and Konz, S., 1992, “Character Size vs. Viewing Distance on VDTs,” Work with
Display Units ‘92, Third International Conference WWDU’92, Berlin, Germany.

Chang, P.-T., Ben-Arieh, D., and Lee, E.S., 1992, “Generation of Mechanical Assembly
Sequences with Fuzzy Weights,” 1st Industrial Engineering Research Conference, Chicago,
Illinois, May 20-21.

Chang, P.-T. and Lee, E.S., 1992, “Ranking of Fuzzy Numbers: Equal Existence Principle and
Non-normalized Fuzzy Numbers,” TIMS/ORSA 33rd Joint National Meeting, Orlando,
Florida, April 26-29.
SPONSORED RESEARCH (National Science Council, Taiwan)

(NSC 98-2221-E-029-007-MY3) “Nonlinear and Fuzzy Earned Value Management & Multiobjective Multi-project Scheduling Model with Nonlinear Resource Consumptions” (2009/8 –
2012/7)
Ping-Teng Chang

(NSC 95-2221-E-029-003-MY3) “Artificial Intelligent Integrated Yield Management System—
Applied in the High Speed Rail (3/3)” (2008/8 – 2009/7)

(NSC 95-2221-E-029-003-MY3) “Artificial Intelligent Integrated Yield Management System—
Applied in the High Speed Rail (2/3)” (2007/8 – 2008/7)

(NSC 95-2221-E-029-003-MY3) “Artificial Intelligent Integrated Yield Management System—
Applied in the High Speed Rail (1/3)” (2006/8 – 2007/7)

(NSC 94-2213-E-029-008) “A Research of Applying Artificial Intelligence in Computational
Molecular Biology (I)” (2005/8 – 2006/7)

(NSC 93-2213-E-029-005) “Innovative and Collaborative Value Chain Development
Engineering for Taiwan IndustryCase Study of the Taiwan Precision Machinery
IndustrySubproject 4: Collaborative Knowledge Management SystemStrategic Pricing
System (3/3)” (2004/8 – 2005/7)

(NSC 93-2213-E-029-004) “Integrated Artificial Intelligent Supply Chain Order Assignment
and Production Planning System (3/3)” (2004/8 – 2005/7)

(NSC 92-2213-E-029-005) “Innovative and Collaborative Value Chain Development
Engineering for Taiwan IndustryCase Study of the Taiwan Precision Machinery
IndustrySubproject 4: Collaborative Knowledge Management SystemStrategic Pricing
System (2/3)” (2003/8 – 2004/7)

(NSC 92-2213-E-029-007) “Integrated Artificial Intelligent Supply Chain Order Assignment
and Production Planning System (2/3)” (2003/8 – 2004/7)

(NSC 91-2213-E-029-009) “Innovative and Collaborative Value Chain Development
Engineering for Taiwan IndustryCase Study of the Taiwan Precision Machinery
IndustrySubproject 4: Collaborative Knowledge Management SystemStrategic Pricing
System (1/3)” (2002/8 – 2003/7)

(NSC 91-2213-E-029-018) “Integrated Artificial Intelligent Supply Chain Order Assignment
and Production Planning System (1/3)” (2002/8 – 2003/7)

(NSC 90-2218-E-029-009) “A Product Life Cycle-based Economic Multi-echelon Production
Planning, Assignment and Inventory Management System (I)” (2001/8 – 2002/7)

(NSC 90-2218-E-029-012) “Strategic Product Life Cycle Forecasting System (3/3)” (2001/8 –
2002/7)

(NSC 89-2213-E-029-031) “Multi-agent Fuzzy Multi-criteria Decision-making System of Multisupply Chain” (2000/8 – 2001/7)

(NSC 89-2213-E-029-035) “Strategic Product Life Cycle Forecasting System (2/3)” (2000/8 –
2001/7)

(NSC 89-2213-E-029-012) “Study of Two-stage Fuzzy Multi-objective Hybrid Genetic
Algorithm Job Shop Scheduling System Approach” (1999/8 – 2000/7)

(NSC 89-2213-E-029-013) “Strategic Product Life Cycle Forecasting System (1/3)” (1999/8 –
2000/7)
Ping-Teng Chang

(NSC 88-2213-E-029-009) “Study of a Framework for Fuzzy Dynamic Flexible Manufacturing
Systems Design & Implementation Planning” (1998/8 – 1999/7)

(NSC 88-2213-E-029-008) “Study of Classifier System Framework and Application with Fuzzy
Dynamic Adaptive Learning and Reasoning” (1998/8 – 1999/7)

(NSC 87-2213-E-029-009) “Dynamic Sensor-neuron Combined Neural Network” (1997/8 –
1998/7)

(NSC 86-2416-H-214-001) “A Study of Fuzzy Assessment Model for Managerial Talent”
(1996/8 – 1997/7)

(NSC 86-2213-E-029-009) “Fuzzy Dynamic Equipment Replacement Programming” (1996/8 –
1997/7)

(NSC 85-2213-E-214-004) “Analytical Approaches to the Group Technology
Family/Machine Cell Formation Problem in Cellular Manufacturing” (1995/8 – 1996/7)

(NSC 84-2213-E-214-015) “Fuzzy Regression Analysis” (1995/2 – 1995/7)
Part
RESEARCH AWARDS

“The 2007 Ph.D. Dissertation Award of the Operations Research Society of Taiwan” - Excellent
First Place (Study of Fuzzy Arithmetic and Fuzziness Accumulation Controlling Method for
System Dynamics with Fuzzy Arithmetic; with Ph.D. graduate K.-P. Lin)

“The 2006 Ph.D. Dissertation Award of the Taiwan Fuzzy Systems Association” – Second Place
(A Study of -Cut Fuzzy Arithmetic Simplifying Rules, Fuzzy Weighted Average and Fuzzy
Function Optimization; with Ph.D. graduate K.-C. Hung)

“Paper Contest of the 2006 Int’l Conference on New Global Management Environment” – Best
Paper (Combining Meta-heuristic and Support Vector Machines in Predicting the Protein
Structure; with Dr. P.-F. Pai and Ph.D. student S.-L. Yang)

“The 2006 Master Thesis Award of the Chinese Institute of Industrial Engineers” - Excellence
(A Study of Multi-objective Parallel-machine Job Shop Rescheduling; with M.S. graduate G.-C.
Pan)

“The 2006 Master Thesis Award of the Chinese Institute of Industrial Engineers” - Excellence
(A Study of Analysis of Multi-generation Product Diffusion Pricing Models for DRAM; with
M.S. graduate S.-C. Chen)

“The 2006 Graduate Thesis Award of the Chinese Institute of Decision Sciences” - Second Place
(A Research of Analysis of Multi-generation Product Diffusion Pricing Model; with M.S.
graduate S.-C. Chen)

“The 2005 Master Thesis Award of the Operations Research Society of Taiwan” - Honorable
Mention (A Research of Parallel Neural Network Power Load Forecasting System Modeling;
with M.S. graduate C.-C. Huang)
Ping-Teng Chang

Chinese Institute of Industrial Engineers - “The 2004 Industrial Engineering Paper Award”
(Fuzzy Message Requirement Classifiers System and an Application to the IC Test Machine
DiagnosticsI)

“The 2004 ING Management Master Thesis Award” - Honorable Mention (A Study of Multiobjective Job-shop Parallel Machine SchedulingApplication of the Ant Colony Optimization
Algorithm; with M.S. graduate C.-Z. Zhong)

“The 2002 APIEMS Thesis Award” - First Place (A Study of Collaborative SearchMultisimplex Genetic Algorithm; with M.S. graduate H.-H. Lee)

“The 2002 APIEMS Thesis Award” - Third Place (Multilevel Proportional Lot-sizing and
Scheduling ProblemA Model with Product Life Cycle, Cash Flow and Marketing Production
Requirements; with M.S. graduate C.-T. Chen)

Chinese Management Association - “The 2002 National Management Master Theses Award” Honorable Mention (Multilevel Proportional Lot-sizing and Scheduling ProblemA Model
with Product Life Cycle, Cash Flow and Marketing Production Requirements; with M.S.
graduate C.-T. Chen)

Chinese Management Association - “The 1999 National Management Master Theses Award” Excellent Thesis in General Management (Product Life Cycle Strategic Forecasting System; with
M.S. graduate C.- H. Chang)

Acer Foundation - “The 1998 Twelfth Dragon Thesis Award” - Honorable Mention (Fuzzy
Message Requirement Classifier System: A Case Study of IC Test Machine Diagnosis Problem;
with M.S. graduate C.-H. Liu)

Acer Foundation - “The 1996 Tenth Dragon Thesis Award” - Honorable Mention (Fuzzy
Dynamic Equipment Replacement Programming; with M.S. graduate C.-T. Wang)

Chinese Management Association - “The 1995 National Management Master Theses Award” Honorable Mention (A Study of Application of Fuzzy Delphi Method to Product Portfolio: A
Case Study of Yieh Loong Group; with co-supervised M.S. graduate D.-C. Lee)

NSC - “2000 Research Prize” - First Class (An Integrated Artificial Intelligent Computer-aided
Process Planning System)

NSC - “1999 Research Prize” - First Class (Fuzzy Decision Networks and Deconvolution)

NSC - “1998 Research Prize” - First Class (The Fuzzy Delphi Method via Fuzzy Statistics and
Membership Function Fitting and an Application to the Human Resources)

NSC - “1997 Research Prize” - First Class (Fuzzy Part Coding for Group Technology)

NSC - “1996 Research Prize” - First Class (Fuzzy Seasonality Forecasting)

NSC - “1995 Research Prize” - First Class (Fuzzy Regression Analysis)
SERVICE
Ping-Teng Chang
INDUSTRIAL PROJECTS / CONSULTING AND PANEL AND REVIEW ACTIVITIES














2009 Industrial and Academic Joint Research Plan, Industrial Development Bureau, Ministry
of Economic Affairs: Tunghai Univ. and Keyarrow (Taiwan) Co., Ltd.  “Chip Conveyor
Product Design and Production Technique Research and Development and R/D Management
Assisting Tool Development Project”(S09800226－093) (2009/4 - 2009/12)
“Survey of IT Firms’ Capacity”  for Corporate Synergy Development Center (2007/10 2007/11)
Kingroup Automation Industry Corp.  “Process Flexibility and EfficiencyModularization
and Project Management Planning and Analysis” (2005/6 - 2006/5)
Taichung Veterans General Hospital  “Pharmacy Department Reengineering” (2005/3 2005/6)
Show Chwan Health Care System  “Intelligent Digital Health Net” (2003/10 - 2004/9)
Consultant for Pro-Max System Corp.  Industry case systems consulting and cooperation
(2000/7 - 2003/8)
Liang Chi Hardware Works Co., Ltd.  “Order Entry and Shipping Information System”
(2001/1 - 2001/7, cooperation with Pro-Max System Corp.)
Mobitai Communications Corp.  Cooperation Project: “Tunghai Digital Village” (2000/7 2001/6, E-commerce net construction and operations design)
Mobitai Communications Corp. and Taichung Veterans General Hospital  Cooperation
Project: “Exchange Network for Emergent Patient Records” (1999/9 - 2000/5)
IBM Taiwan Corp.  Cooperation Project: “Business Knowledge Management” (1999/5 2001/6, KM application with Lotus Notes and pricing knowledge system)
Parfaite Tool Co., Ltd.  “Information System Construction” (1999/7 - 2001/1, order
management, production control, inventory management, pricing, accounting system design
& consulting)
Tait Marketing & Distribution Co., Ltd., Contract Distribution Services  “Intelligent Delivery
System” (1999/9 - 2000/6)
Genuine Co., Ltd. (Logistics)  “Operations Indices Analysis” (1999/9 - 2000/6)
Bliss Yih Enterprise Co., Ltd.  “Process Streamline, Inventory and Operation Standardization
Improvement” (1997/7 - 1998/1)

Ministry of Economic Affairs, Industrial Development Bureau and Department of Industrial
Technology, Project Proposal Panelist and Reviewer (2007 - now)

Corporate Synergy Development Center, Advisory Committee for Collaborative Commerce
(2008/7)
INVITED SPEECHES
Ping-Teng Chang





National Kaohsiung First University of Science and Technology, College of Management,
Graduate Institute of Management, Kaohsiung  “Fuzzy Bi-cluster Regression”, November 23,
2007
Taichung Veterans General Hospital, Taichung  “Industrial Engineering/Management and
Thinking Methodologies Applied in Hospital Management”, June 19, 2006
Forum of Chinese Industrial Engineering and Hospitality Management Innovation, Tianjin,
China  “Process Reengineering of Hospital Clinic Pharmacy”, April 18 (April 18-19), 2006
Kingroup Automation Industry Corp., Taichung  “Time Based Competition”, August 6, 2005
2005 National MBA Operations Management Course Meeting, Shanghai, China  “Keynote
Speech: Time Based Competition”, July 15 (July 14-16), 2005

The 13th Conference on National Defense Management and Practice, National Defense
Management College, Taiwan  Panelist of “Forum of Applications of Operations Research in
National Defense and Civilian Industries”, June 17, 2005

Ming Hsin University of Science and Technology, Graduate Institute of Engineering
Management, Taiwan  “Manufacturing Planning Systems, SCM and Search Methodology”,
May 4, 2005





Nan Kai Institute of Technology, Department of Industrial Management, Taiwan 
“Intelligent Manufacturing Planning Systems, SCM & Cooperative Search”, January 13, 2003
National Tsing Hua University, Department of Industrial Engineering and Engineering
Management, Taiwan  “Intelligent Manufacturing Planning Systems, SCM & Cooperative
Search”, May 8, 2002
Feng Chia University, Department of Industrial Engineering, Taichung  “Intelligent
Manufacturing Planning Systems”, May 28, 2001
Yuan-Ze University, Department of Industrial Engineering and Management, Taiwan 
“Intelligent Manufacturing Planning Systems”, June 8, 2000
I-Shou University, Department of Industrial Engineering and Management, Taiwan  “A
GA/TS Mixture Approach to Job Shop Scheduling with Multiple Quantitative & Qualitative
Objectives”, December 23, 1999

Acer Inc.  “Calm Production, Productivity & Flexibility Improvement”, January 28, 1999

Choice Communications & Logistics Corp.  “Logistics”, September 10, 11 and 14, 1998



Bliss Yih Enterprise Co., Ltd.  “Process Streamline, Inventory & Operation Standardization
Improvement”, July 1998
Chia-Yi Christian Hospital  “Hospital Management & Reengineering”, November 14, 1997
Chinese Petroleum Corp., Kaohsiung Refinery  “Theory & Practice of Work Process
Simplification”, November 21, 1995
Ping-Teng Chang

Yieh Loong Group  “Production Management”, August 23-September 1, 1995

Yieh Loong Group  “Practice of Managerial Implements”, August 24, 1995
CONFERENCE AND SOCIETY SERVICE

Co-General Chair, The 2006 Annual Meeting of Chinese Institute of Industrial Engineers,
Taichung, December 23, 2006

General Chair, The 2005 Annual Meeting of Operations Research Society of Taiwan and
INFORMS Taiwan Chapter and Operations Research and Applications Conference, Taipei,
November 4, 2005

General Chair, The 2005 Workshop on Technology Management Application Software,
Taiwan, May 28, 2005

Co-General Chair, The Workshop of NSC Industrial Engineering and Management Program:
Innovative and Collaborative Value Chain Development Engineering for Taiwan IndustryCase Study of the Taiwan Precision Machinery Industry, Taiwan, March 5, 2005

General Chair, The First Operations Research Society of Taiwan Conference and 2004
Conference on Science and Management, Taipei, November 12, 2004

General Chair, The 2002 First Conference of Knowledge Management and Collaborative
Planning, Taiwan, October 12, 2002

General Chair, The 2002 Collaborative Knowledge Management Workshop, Taiwan, March 9,
2002

General Chair, The 2002 Conference of Electronic Commerce and Digital Life, Taiwan,
August 21, 2002

Program and Organizing Chair, The 1999 Meeting on Industrial Management and
Competitiveness, Taiwan, July 3, 1999

Advisory Board / Organizing / Program Committees Members:
Program Committee, The 14th Conference on Artificial Intelligence and Applications,
Taichung, Taiwan, October 30-31, 2009
Advisory Board, The 2008 Annual Meeting of Chinese Institute of Industrial Engineers,
Chung Li, Taiwan, December 13, 2008
Program Committee, The 13th Conference on Artificial Intelligence and Applications, Ilan,
Taiwan, November 21-22, 2008
Program Committee, The 2007 National Computer Symposium, Taichung, Taiwan, December
20-21, 2007
Program Committee, The 12th Conference on Artificial Intelligence and Applications, Yunlin,
Taiwan, November 16-17, 2007
Organizing Committee, The Fourth Conference of Operations Research Society of Taiwan
and 2007 Operations Research Theory and Practice Conference, Hualien, Taiwan, October 2627, 2007
Advisory Board, The 36th International Conference on Computers and Industrial
Engineering, Taipei, June 20-23, 2006
Ping-Teng Chang
Organizing Committee, The 10th Conference on Artificial Intelligence and Applications,
Kaohsiung, Taiwan, December 2-3, 2005
Advisory Board, The 1st Conference on Product Reliability and Maintainability Practice,
Changhua, Taiwan, November 18-19, 2004
Organizing Committee, The 4th International Conference on Operations and Quantitative
Management (ICOQM), Tainan, Taiwan, 2003
Organizing Committee, The Ninth National Conference on Fuzzy Theory and Its
Applications, Chung-Li, Taiwan, November 23-24, 2001
Organizing Committee, The 2001 Annual Meeting of Chinese Institute of Industrial Engineers,
Kaohsiung, Taiwan, December 8, 2001
Organizing Committee, The Sixth National Conference on Fuzzy Theory and Its Applications,
Taichung, Taiwan, December 4-5, 1998

Session Chairs:
The 2008 Annual Meeting of Chinese Institute of Industrial Engineers, Chung Li, Taiwan,
December 13, 2008
The Fourth Conference of Operations Research Society of Taiwan and 2007 Operations
Research Theory and Practice Conference, Hualien, Taiwan, October 26-27, 2007
The Annual Project Concluding Presentation of National Science Council, Industrial
Engineering and Management Program, Taipei, November 12, 2005
The 1st Operations Research Society of Taiwan Conference and 2004 Conference on Science
and Management, Taipei, November 12, 2004
The Ninth National Conference on Fuzzy Theory and Its Applications, Chung-Li, Taiwan,
November 23-24, 2001
The 2001 Annual Meeting of Chinese Institute of Industrial Engineers, Kaohsiung, Taiwan,
December 8, 2001
The International Workshop on Intelligent Systems Resolutions, the 8th Bellman Continuum,
Hsinchu, Taiwan, December 11-12, 2000
The 5th Annual International Conference on Industrial EngineeringTheory, Applications &
Practice, Hsinchu, Taiwan, December 13-15, 2000
The 1999 Conference on Technology and Applications of Quality & Management for Twenty
First Century, Kaohsiung, Taiwan, June 19, 1999
The Sixth National Conference on Fuzzy Theory and Its Applications, Taichung, Taiwan,
December 4-5, 1998
The 1998 Annual Meeting of Chinese Institute of Industrial Engineers, Janghuah, Taiwan,
December 13, 1998
The 5th European Congress on Intelligent Techniques and Soft Computing, Aachen,
Germany, September 8-11, 1997

Chinese Institute of Industrial Engineers, Directorate, 2005  2006, 2007  2008

Operations Research Society of Taiwan, Board of Controllers, 2008  2009

Operations Research Society of Taiwan, Executive Controller, 2006  2007

Operations Research Society of Taiwan, President, 2003/9  2005/11

INFORMS Taiwan Chapter, President, 2003/1  2005/11
JOURNAL SERVICE
Ping-Teng Chang
International Journal of Artificial Life Research (IJALR), 2009/01 
International Journal of Operations Research, 2004/11  2008/10
Editorial Board
Applied Mathematical Sciences, 2006/11  present
Journal of Chinese Institute of Industrial Engineers, 2003  2004
Journal of National Defense Management, 2008  present
Editorial Advisory Board Scientific Journals International (SJI), 2006/11  present
Editor-in-Chief
Referees/Reviewers
OR Spectrum

IEEE Transactions on Fuzzy Systems

IEEE Transactions on Systems, Man and Cybernetics - Part B

Information Sciences

International Journal of Production Research

European Journal of Operational Research

Fuzzy Sets and Systems

International Journal of Production Economics

Fuzzy Optimization and Decision Making

International Journal of Operations and Quantitative Management

International Journal of Systems Science

Soft Computing and Automation Journal

International Journal of Technology Management

International Journal of Electronic Business Management

International Journal of Information and Management Sciences

International Journal of Fuzzy Systems

Journal of the Chinese Institute of Industrial Engineers

Decision Support Systems

Water Resources Management

Journal of Multiple-Valued Logic and Soft Computing

International Journal of Modelling and Simulation

International Journal of Computer Integrated Manufacturing

Applied Mathematical Modelling

PanPacific Management Review

Journal of Information Science and Engineering
