SECTION 088000 - GLAZING

advertisement
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
This Product MasterSpec Section is licensed by ARCOM to AGC Glass Company North America
("Licensee").
This Product MasterSpec Section modifies the original MasterSpec text, and does not include the
full content of the original MasterSpec Section.
Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by,
or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither
AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec
Section by any end user. A qualified design professional should review and edit the document to suit
project requirements.
For more information, contact AGC Glass Company North America, 11175 Cicero Dr., Suite 400,
Alpharetta, GA 30022; Phone: (888) 234-8380; Website: www.us.agc.com; Email: info@us.agc.com.
For information about MasterSpec contact ARCOM at (800) 424-5080 or visit www.MasterSpec.com.
Copyright 2014 by The American Institute of Architects (AIA)
Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA
SECTION 088000 - GLAZING
TIPS:
To view non-printing Editor's Notes that provide guidance for editing, click on Masterworks/Single-File
Formatting/Toggle/Editor's Notes.
To read detailed research, technical information about products and materials, and coordination checklists,
click on Masterworks/Supporting Information.
Revise this Section by deleting and inserting text to meet Project-specific requirements.
This Section uses the term "Architect." Change this term to match that used to identify the design
professional as defined in the General and Supplementary Conditions.
Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section
titles may have changed.
PART 1 - GENERAL
1.1
RELATED DOCUMENTS
Retain or delete this article in all Sections of Project Manual.
A.
Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 01 Specification Sections, apply to this Section.
GLAZING
088000 - 1
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
1.2
SUMMARY
A.
Section includes:
1.
2.
B.
Glass for [windows] [doors] [interior borrowed lites] [storefront framing] [glazed
curtain walls] [sloped glazing] [skylights].
Glazing sealants and accessories.
Related Requirements:
Retain subparagraphs below to cross-reference requirements Contractor might expect to find in this
Section but are specified in other Sections.
1.
2.
3.
4.
5.
6.
7.
8.
1.3
Section 057300 "Decorative Metal Railings" for glazing in railings.
Section 084126 "All-Glass Entrances and Storefronts."
Section 084233 "Revolving Door Entrances" for glass in revolving door entrances.
Section 084423 "Structural-Sealant-Glazed Curtain Walls" for glazing sealants used in
structural-sealant-glazed curtain walls.
Section 088113 "Decorative Glass Glazing."
Section 088300 "Mirrors."
Section 088813 "Fire-Resistant Glazing."
Section 088853 "Security Glazing."
DEFINITIONS
Retain terms that remain after this Section has been edited for a project.
A.
Glass Manufacturers: Firms that produce primary glass, as defined in referenced glazing
publications.
B.
Glass Fabricators: Firms that produce the fabricated glass products. Fabrication processes
include cutting, heat processing, insulating, spandrel, laminating and other as fabrication
activities defined in referenced glazing publications.
ASTM C 1036 also includes traditional thickness designations in IP units, but the actual thickness is
based on the equivalent IP designation in millimeters.
C.
Glass Thicknesses: Indicated by thickness designations in millimeters according to
ASTM C 1036.
D.
IBC: International Building Code.
E.
Interspace: Space between lites of an insulating-glass unit.
1.4
COORDINATION
A.
Coordinate glazing channel dimensions to provide necessary bite on glass, minimum edge and
face clearances, and adequate sealant thicknesses, with reasonable tolerances.
GLAZING
088000 - 2
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
1.5
PREINSTALLATION MEETINGS
Retain "Preinstallation Conference" Paragraph below if Work of this Section is extensive or complex
enough to justify a conference.
A.
Preinstallation Conference: Conduct conference at [Project site] <Insert location>.
If retaining subparagraphs below, revise to include Project-specific requirements. Insert additional
requirements to suit Project.
1.
2.
1.6
Review and finalize construction schedule and verify availability of materials, Installer's
personnel, equipment, and facilities needed to make progress and avoid delays.
Review temporary protection requirements for glazing during and after installation.
ACTION SUBMITTALS
A.
Product Data: For each type of product.
B.
Sustainable Design Submittals:
"Product Data" Subparagraph below applies to LEED 2009 NC, CI, and CS; LEED v4; IgCC;
ASHRAE 189.1; and Green Globes. Coordinate with requirements for sealants.
1.
Product Data: For sealants, indicating VOC content.
"Laboratory Test Reports" Subparagraph below applies to LEED 2009 for Schools, LEED v4, IgCC,
ASHRAE 189.1, and Green Globes. Coordinate with requirements for sealants.
2.
Laboratory Test Reports: For sealants, indicating compliance with requirements for lowemitting materials.
C.
Glass Samples: For each type of [glass product other than clear monolithic vision glass] [the
following products]; 12 inches (300 mm) square.
1.
2.
3.
4.
Tinted glass.
Coated glass.
Laminated glass.
Insulating glass.
D.
Glazing Accessory Samples: For [sealants] [and] [colored spacers], in 12-inch (300-mm)
lengths.[ Install sealant Samples between two strips of material representative in color of
the adjoining framing system.]
E.
Glazing Schedule: List glass types and thicknesses for each size opening and location. Use same
designations indicated on Drawings.
F.
Delegated-Design Submittal: For glass indicated to comply with performance requirements and
design criteria, including analysis data signed and sealed by the qualified professional engineer
responsible for their preparation.
GLAZING
088000 - 3
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
1.7
INFORMATIONAL SUBMITTALS
Coordinate "Qualification Data" Paragraph below with qualification requirements in Section 014000
"Quality Requirements" and as may be supplemented in "Quality Assurance" Article. Retain second
option below only if retaining sputter-coated, low-E-coated, insulating-glass units in Part 2 and products
listed are those of an approved manufacturer or fabricator.
A.
Qualification Data: For [Installer] [manufacturers of insulating-glass units with sputtercoated, low-E coatings] [glass testing agency] [and] [sealant testing agency].
Retain "Product Certificates" Paragraph below to require submittal of product certificates from
manufacturers.
B.
Product Certificates: For glass.
C.
Product Test Reports: For [tinted glass] [coated glass] [insulating glass] [and] [glazing
sealants], for tests performed by a qualified testing agency.
1.
For glazing sealants, provide test reports based on testing current sealant formulations
within previous 36-month period.
D.
Preconstruction adhesion and compatibility test report.
E.
Sample Warranties: For special warranties.
1.8
QUALITY ASSURANCE
Retain option in "Manufacturer Qualifications for Insulating-Glass Units with Sputter-Coated, Low-E
Coatings" Paragraph below only if products listed in Part 2 for sputter-coated, low-E-coated, insulatingglass units are those of an approved manufacturer.
A.
Fabricator Qualifications for Insulating-Glass Units with Sputter-Coated, Low-E Coatings: A
qualified insulating-glass fabricator who is approved by coated-glass manufacturer.
If retaining "Installer Qualifications" Paragraph below, verify, with prospective installers, that they can
comply with certification requirements referenced.
B.
Installer Qualifications: A qualified installer who employs glass installers for this Project who
are certified under the National Glass Association's Certified Glass Installer Program.
Retain "Glass Testing Agency Qualifications" Paragraph below if retaining "Product Test Reports"
Paragraph in "Informational Submittals" Article and it is known that glass products specified have been
tested by NFRC-accredited testing agencies.
C.
Glass Testing Agency Qualifications: A qualified independent testing agency accredited
according to the NFRC CAP 1 Certification Agency Program.
D.
Sealant Testing Agency Qualifications: An independent testing agency qualified according to
ASTM C 1021 to conduct the testing indicated.
GLAZING
088000 - 4
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
E.
Mockups: Build mockups to demonstrate aesthetic effects and to set quality standards for
materials and execution.
Retain first subparagraph below for large-scale mockup. Indicate portion of wall represented by mockup
on Drawings or draw mockup as separate element. Coordinate requirements with those in other Sections
specifying systems or products that receive glazing.
1.
Install glazing in mockups specified in [Section 084113 "Aluminum-Framed
Entrances
and
Storefronts"]
[Section 085113
"Aluminum
Windows"]
[Section 084413 "Glazed Aluminum Curtain Walls"] <Insert Section number and
title> to match glazing systems required for Project, including glazing methods.
Retain subparagraph below if the intention is to make an exception to the default requirement in
Section 014000 "Quality Requirements" for demolishing and removing mockups.
2.
Subject to compliance with requirements, approved mockups may become part of the
completed Work if undisturbed at time of Substantial Completion.
1.9
PRECONSTRUCTION TESTING
Retain this article for preconstruction testing if insulating or laminated glass is installed with glazing
sealants. Adhesion and compatibility testing is essential for insulating and laminated glass and is usually
done by sealant manufacturer. Tests require large number of Samples, and some tests require four weeks
to complete.
A.
Preconstruction Adhesion and Compatibility Testing: Test each glass product, tape sealant,
gasket, glazing accessory, and glass-framing member for adhesion to and compatibility with
elastomeric glazing sealants.
Retain first subparagraph below if previous testing is acceptable.
1.
2.
3.
4.
5.
1.10
A.
Testing is not required if data are submitted based on previous testing of current sealant
products and glazing materials matching those submitted.
Use ASTM C 1087 to determine whether priming and other specific joint-preparation
techniques are required to obtain rapid, optimum adhesion of glazing sealants to glass,
tape sealants, gaskets, and glazing channel substrates.
Test no fewer than [eight] <Insert number> Samples of each type of material, including
joint substrates, shims, sealant backings, secondary seals, and miscellaneous materials.
Schedule enough time for testing and analyzing results to prevent delaying the Work.
For materials failing tests, submit sealant manufacturer's written instructions for
corrective measures including the use of specially formulated primers.
DELIVERY, STORAGE, AND HANDLING
Protect glazing materials according to manufacturer's written instructions. Prevent damage to
glass and glazing materials from condensation, temperature changes, direct exposure to sun, or
other causes.
GLAZING
088000 - 5
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Retain paragraph below if there is a reasonable possibility that insulating glass might be air freighted to
Project site or will otherwise be exposed to substantial altitude changes.
B.
1.11
A.
Comply with insulating-glass manufacturer's written instructions for venting and sealing units to
avoid hermetic seal ruptures due to altitude change.
FIELD CONDITIONS
Environmental Limitations: Do not proceed with glazing when ambient and substrate
temperature conditions are outside limits permitted by glazing material manufacturers and when
glazing channel substrates are wet from rain, frost, condensation, or other causes.
Retain subparagraph below if sealants are required. Revise if another temperature range is required.
1.
1.12
Do not install glazing sealants when ambient and substrate temperature conditions are
outside limits permitted by sealant manufacturer or are below 40 deg F (4.4 deg C).
WARRANTY
When warranties are required, verify with Owner's counsel that warranties stated in this article are not
less than remedies available to Owner under prevailing local laws.
Paragraphs below are examples only.
A.
Manufacturer's Special Warranty for Coated-Glass Products: Manufacturer agrees to replace
coated-glass units that deteriorate within specified warranty period. Deterioration of coated
glass is defined as defects developed from normal use that are not attributed to glass breakage or
to maintaining and cleaning coated glass contrary to manufacturer's written instructions. Defects
include peeling, cracking, and other indications of deterioration in coating.
Verify available warranties and warranty periods. Revise subparagraph below if glass manufacturers
insist on warranty beginning on date of manufacture. See Evaluations.
1.
B.
Warranty Period: [10] <Insert number> years from date of Substantial Completion.
Manufacturer's Special Warranty for Laminated Glass: Manufacturer agrees to replace
laminated-glass units that deteriorate within specified warranty period. Deterioration of
laminated glass is defined as defects developed from normal use that are not attributed to glass
breakage or to maintaining and cleaning laminated glass contrary to manufacturer's written
instructions. Defects include edge separation, delamination materially obstructing vision
through glass, and blemishes exceeding those allowed by referenced laminated-glass standard.
Verify available warranties and warranty periods. Revise subparagraph below if glass manufacturers
insist on warranty beginning on date of manufacture. See Evaluations.
1.
GLAZING
Warranty Period: Five years from date of Substantial Completion.
088000 - 6
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
C.
Manufacturer's Special Warranty for Insulating Glass: Manufacturer agrees to replace
insulating-glass units that deteriorate within specified warranty period. Deterioration of
insulating glass is defined as failure of hermetic seal under normal use that is not attributed to
glass breakage or to maintaining and cleaning insulating glass contrary to manufacturer's written
instructions. Evidence of failure is the obstruction of vision by dust, moisture, or film on interior
surfaces of glass.
Verify available warranties and warranty periods. Revise subparagraph below if glass manufacturers
insist on warranty beginning on date of manufacture. See Evaluations.
1.
Warranty Period: [10] <Insert number> years from date of Substantial Completion.
Possibly insert glazier's warranty covering labor to replace insulating-glass units or, as an alternative, a
maintenance contract that incorporates unit prices for replacement labor.
PART 2 - PRODUCTS
See Editing Instruction No. 1 in the Evaluations for cautions about named manufacturers and products.
For an explanation of options and Contractor's product selection procedures, see Section 016000 "Product
Requirements."
2.1
MANUFACTURERS
A.
Basis-of-Design Product: Subject to compliance with requirements, provide AGC Glass
Company North America; <product name or designation> or a comparable product by one of
the following:
1.
AIG; American Insulated Glass.
2.
Canadian Insulated Glass.
3.
Columbia Commercial Products.
4.
Cristacurva.
5.
EFCO.
6.
GTI; Glaz-Tech Industries.
7.
Guardian Industries Corp.; SunGuard.
8.
Insulite Glass, Inc.
9.
JE Berkowitz, LP.
10. Laurier.
11. Manko.
12. Multiver.
13. Nashville Tempered Glass.
14. Niskayuna Glass.
15. Oldcastle BuildingEnvelope.
16. Pilkington North America.
17. PPG Industries, Inc.
18. ProTemp.
19. Redbud Glass.
20. SAAND.
21. SIGCO.
22. SolarSeal.
GLAZING
088000 - 7
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
23.
24.
25.
26.
B.
Source Limitations for Glass: Obtain from single source from single manufacturer for each
glass type.
1.
2.
C.
2.2
Tristar.
Trulite Glass & Aluminum Solutions, LLC.
WA Wilson.
<Insert manufacturer's name>.
Obtain tinted glass from single source from single manufacturer.
Obtain reflective-coated glass from single source from single manufacturer.
Source Limitations for Glazing Accessories: Obtain from single source from single
manufacturer for each product and installation method.
PERFORMANCE REQUIREMENTS
A.
General: Installed glazing systems shall withstand normal thermal movement and wind and
impact loads (where applicable) without failure, including loss or glass breakage attributable to
the following: defective manufacture, fabrication, or installation; failure of sealants or gaskets to
remain watertight and airtight; deterioration of glazing materials; or other defects in
construction.
Retain "Delegated Design" Paragraph below if Contractor is required to assume responsibility for design.
B.
Delegated Design: Engage a qualified professional engineer, as defined in Section 014000
"Quality Requirements," to design glazing.
C.
Structural Performance: Glazing shall withstand the following design loads within limits and
under conditions indicated determined according to the IBC and ASTM E 1300.
Retain one of two "Design Wind Pressures" subparagraphs below, usually first. The IBC requires that
design wind pressures used for design of exterior components and cladding not designed by the registered
design professional be shown on the Construction Documents.
1.
2.
Design Wind Pressures: As indicated on Drawings.
Design Wind Pressures: Determine design wind pressures applicable to Project according
to ASCE/SEI 7, based on heights above grade indicated on Drawings.
a.
Wind Design Data: As indicated on Drawings.
Retain "Wind Design Data" Subparagraph above or "Basic Wind Speed," "Importance Factor," and
"Exposure Category" subparagraphs below; insert other design data if required. The IBC requires that
data in subparagraphs below be shown on the Construction Documents.
b.
Basic Wind Speed: [85 mph (38 m/s)] [90 mph (40 m/s)] [100 mph (44 m/s)]
[110 mph (49 m/s)] <Insert value>.
c.
Importance Factor: [1.0] <Insert factor>.
d.
Exposure Category: [B] [C] [D].
GLAZING
088000 - 8
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Retain "Design Snow Loads" Subparagraph below if sloped glazing is exposed to snow loads. The IBC
requires that the flat-roof snow load be shown on the Construction Documents if the ground snow load
exceeds 10 lbf/sq. ft. (0.479 kN/sq. m).
3.
4.
Design Snow Loads: <Insert design snow load> [As indicated on Drawings].
Thickness of Patterned Glass: Base design of patterned glass on thickness at thinnest part
of the glass.
"Probability of Breakage for Sloped Glazing" Subparagraph below is an example only and is more
conservative than ASTM E 1300 and the IBC, which are based on a probability of breakage of 0.008.
5.
Probability of Breakage for Sloped Glazing: For glass surfaces sloped more than 15
degrees from vertical, design glass for a probability of breakage not greater than 0.001.
Deflection requirements in "Maximum Lateral Deflection" Subparagraph below are examples only and
apply only to glass supported on all four edges. The IBC does not contain any deflection limits for glass.
ASTM E 1300 only requires that the deflection not result in loss of edge support. Revise to suit Project.
6.
Maximum Lateral Deflection: For glass supported on all four edges, limit center-of-glass
deflection at design wind pressure to not more than 1/50 times the short-side length or 1
inch (25 mm), whichever is less.
"Differential Shading" Subparagraph below applies primarily to tinted glass because of its heat-absorbing
property. ASTM E 1300 and the IBC do not address this concern.
7.
Differential Shading: Design glass to resist thermal stresses induced by differential
shading within individual glass lites.
Retain "Windborne-Debris-Impact Resistance" Paragraph below if required by Project. The IBC defines
windborne debris regions. Enhanced protection applies to essential facilities. Verify requirements of
authorities having jurisdiction.
D.
Windborne-Debris-Impact Resistance: Exterior glazing shall comply with [basic] [enhanced]protection testing requirements in ASTM E 1996 for [Wind Zone 1] [Wind Zone 2] [Wind
Zone 3] [Wind Zone 4] when tested according to ASTM E 1886. Test specimens shall be no
smaller in width and length than glazing indicated for use on Project and shall be installed in
same manner as glazing indicated for use on Project.
1.
2.
Large-Missile Test: For glazing located within 30 feet (9.1 m) of grade.
Small-Missile Test: For glazing located more than 30 feet (9.1 m) above grade.
E.
Safety Glazing: Where safety glazing is indicated, provide glazing that complies with
16 CFR 1201, Category II.
F.
Thermal and Optical Performance Properties: Provide glass with performance properties
specified, as indicated in manufacturer's published test data, based on procedures indicated
below:
Retain subparagraphs below that apply to types of glass for which thermal and optical performance
properties are specified.
1.
For monolithic-glass lites, properties are based on units with lites [6 mm thick] [of
thickness indicated].
GLAZING
088000 - 9
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
2.
3.
4.
5.
6.
2.3
For laminated-glass lites, properties are based on products of construction indicated.
For insulating-glass units, properties are based on units of thickness indicated for overall
unit and for each lite.
U-Factors: Center-of-glazing values, according to NFRC 100 and based on LBL's
WINDOW 5.2 computer program, expressed as Btu/sq. ft. x h x deg F (W/sq. m x K).
Solar Heat-Gain Coefficient and Visible Transmittance: Center-of-glazing values,
according to NFRC 200 and based on LBNL's WINDOW 6.3 computer program.
Visible Reflectance: Center-of-glazing values, according to NFRC 300.
GLASS PRODUCTS, GENERAL
A.
Glazing Publications: Comply with published recommendations of glass product manufacturers
and organizations below unless more stringent requirements are indicated. See these
publications for glazing terms not otherwise defined in this Section or in referenced standards.
Retain publications in subparagraphs below that apply to glass products specified.
1.
2.
3.
4.
GANA Publications: ["Laminated Glazing Reference Manual" and ]"Glazing
Manual."
AAMA Publications: AAMA GDSG-1, "Glass Design for Sloped Glazing," and
AAMA TIR A7, "Sloped Glazing Guidelines."
IGMA Publication for Sloped Glazing: IGMA TB-3001, "Guidelines for Sloped
Glazing."
IGMA Publication for Insulating Glass: SIGMA TM-3000, "North American Glazing
Guidelines for Sealed Insulating Glass Units for Commercial and Residential Use."
Retain "Safety Glazing Labeling" Paragraph below if applicable and if labeling is required. Not all
manufacturers participate in third-party testing programs.
B.
Safety Glazing Labeling: Where safety glazing is indicated, permanently mark glazing with
certification label of [the SGCC] [the SGCC or another certification agency acceptable to
authorities having jurisdiction] [or] [manufacturer]. Label shall indicate manufacturer's
name, type of glass, thickness, and safety glazing standard with which glass complies.
Delete "Insulating-Glass Certification Program" Paragraph below if no insulating glass. Not all
manufacturers participate in program; see the IGCC directory for participants. Verify that types of units
required are certified.
C.
Insulating-Glass Certification Program: Permanently marked either on spacers or on at least one
component lite of units with appropriate certification label of IGCC.
D.
Thickness: Where glass thickness is indicated, it is a minimum.[ Provide glass that complies
with performance requirements and is not less than the thickness indicated.]
Delete "Minimum Glass Thickness for Exterior Lites" Subparagraph below if glass thickness for each
kind of glass is indicated on Drawings or in Part 2 articles where glass units are specified.
1.
GLAZING
Minimum Glass Thickness for Exterior Lites: [6 mm] <Insert thickness designation>.
088000 - 10
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Revise "Thickness of Tinted Glass" Subparagraph below if different thicknesses of tinted glass are
required for specific locations. Different thicknesses of tinted glass have different appearances.
2.
Thickness of Tinted Glass: Provide same thickness for each tint color indicated
throughout Project.
E.
F.
Strength: Where annealed float glass is indicated, provide annealed float glass, heatstrengthened float glass, or fully tempered float glass[ as needed to comply with
"Performance Requirements" Article]. Where heat-strengthened float glass is indicated,
provide heat-strengthened float glass or fully tempered float glass[ as needed to comply with
"Performance Requirements" Article]. Where fully tempered float glass is indicated, provide
fully tempered float glass.
Heat-Treated Float Glass: Where heat treated float glass is required or indicated provide glass in
accordance to ASTM C 1048; ASTM C 1036 Type I; Quality-Q3; Class I (clear) unless otherwise
indicated; of kind and condition indicated.
Retain first subparagraph below if orientation of glass is important. See Evaluations. Verify that glass
sizes indicated can be manufactured with roll wave parallel to bottom edge.
1.
2.
3.
Fabrication Process: By horizontal (roller-hearth) process with roll-wave distortion
parallel to bottom edge of glass as installed unless otherwise indicated.
For uncoated glass, comply with requirements for Condition A.
For coated vision glass, comply with requirements for Condition C (other coated glass).
If heat soaking of fully tempered glass is needed, insert requirements here.
G.
2.4
Coating in first paragraph below is available only on clear float glass and is applied
pyrolytically on the float line. Consequently, if a reflective or low-E coating is required (which
would be on the second surface, which was exposed to the molten tin bath on the float line), it
must be a sputtered coating.
GLASS PRODUCTS
Retain paragraphs in this article that apply to monolithic-, laminated-, and insulating-glass types
specified.
Retain "Clear Annealed Float Glass" Paragraph below even if plain, clear float glass is not required; other
paragraphs in this article and in glass types articles depend on below for definition of "clear float glass."
A.
Clear Annealed Float Glass: ASTM C 1036, Type I, Class 1 (clear), Quality-Q3.
Retain option in "Ultraclear Float Glass" Paragraph below if required for passive solar design.
B.
Ultraclear Float Glass: ASTM C 1036, Type I, Class I (clear), Quality-Q3; and with visible light
transmission of not less than 91 percent[ and solar heat gain coefficient of not less than 0.87].
C.
Tinted Annealed Float Glass: ASTM C 1036, Type I, Class 2 (tinted), Quality-Q3.
GLAZING
088000 - 11
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Retain "Fully Tempered Float Glass" Paragraph below even if plain, tempered float glass is not required;
other paragraphs in this article and glass types articles depend on below for definition of "fully tempered
float glass." Always retain paragraph if Contractor is responsible for determining glass thickness and
strength.
D.
Fully Tempered Float Glass: ASTM C 1048, Kind FT (fully tempered), Condition A (uncoated)
unless otherwise indicated, Type I, Class 1 (clear) or Class 2 (tinted) as indicated, Quality-Q3.
Retain "Fabrication Process" Subparagraph below if orientation of glass is important. See Evaluations.
Verify that glass sizes indicated can be manufactured with roll wave parallel to bottom edge.
1.
Fabrication Process: By horizontal (roller-hearth) process with roll-wave distortion
parallel to bottom edge of glass as installed unless otherwise indicated.
If heat soaking of fully tempered glass is needed, insert requirements here.
Retain "Heat-Strengthened Float Glass" Paragraph below even if plain, heat-strengthened float glass is
not required but other paragraphs in this article and glass types articles depend on below for definition of
"heat-strengthened float glass." Always retain paragraph if Contractor is responsible for determining glass
thickness and strength.
E.
Heat-Strengthened Float Glass: ASTM C 1048, Kind HS (heat strengthened), Type I,
Condition A (uncoated) unless otherwise indicated, Type I, Class 1 (clear) or Class 2 (tinted) as
indicated, Quality-Q3.
Retain "Fabrication Process" Subparagraph below if orientation of glass is important. See Evaluations.
Verify that glass sizes indicated can be manufactured with roll wave parallel to bottom edge.
1.
Fabrication Process: By horizontal (roller-hearth) process with roll-wave distortion
parallel to bottom edge of glass as installed unless otherwise indicated.
F.
Sputtered Coated Low-Emissivity Clear Vision Glass, ASTM C 1376, Kind CV (coated vision
glass), coated by sputtered process, ASTM C 1036, Type I, Class I (clear) or Class 2 (tinted) as
indicated, Quality-Q3.
G.
Pyrolytic Coated Low-Emissivity Clear Vision Glass, ASTM C 1376, Kind CO (coated
overhead glass), coated by pyrolytic process, ASTM C 1036, Type I, Class I (clear) or Class 2
as indicated, Quality-Q3.
H.
Ceramic-Coated Vision Glass: ASTM C 1048, Condition C, Type I, Class 1 (clear) or Class 2
(tinted) as indicated, Quality-Q3; and complying with Specification No. 95-1-31 in GANA's
"Engineering Standards Manual."
I.
Reflective-Coated Vision Glass: ASTM C 1376.
J.
Ceramic-Coated Spandrel Glass: ASTM C 1048, Type I, Condition B, Quality-Q3.
In "Silicone-Coated Spandrel Glass" Paragraph below, coating is an elastomeric paint and is less
expensive than ceramic coating. Silicone coating is typically more uneven than ceramic coating and
frequently contains pin holes; however, these irregularities are generally not visible from typical viewing
GLAZING
088000 - 12
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
distances because of lack of illumination in the space behind spandrel glass. Silicone coating is more
readily available in custom colors and may provide fallout resistance.
K.
Silicone-Coated Spandrel Glass: ASTM C 1048, Type I, Condition C, Quality-Q3.
L.
Reflective-Coated Spandrel Glass: ASTM C 1376, Kind CS.
2.5
LAMINATED GLASS
AGC Glass Company North America's Defender Impact laminated glass, with 0.060 or 0.090 interlayers,
provides small and large missile protection and is typically specified in section 088853 "Security
Glazing".
A.
Laminated Glass: ASTM C 1172. Use materials that have a proven record of no tendency to
bubble, discolor, or lose physical and mechanical properties after fabrication and installation.
1.
2.
3.
Construction: Laminate glass with [polyvinyl butyral interlayer] [ionoplast interlayer]
[or] [cast-in-place and ultra-violet cured-transparent-resin interlayer] to comply
with interlayer manufacturer's written instructions.
Interlayer Thickness: Provide thickness not less than that indicated and as needed to
comply with requirements.
Interlayer Color: Clear unless otherwise indicated.
Retain "Windborne-Debris-Impact-Resistant Laminated Glass" Paragraph below if retaining "WindborneDebris-Impact Resistance" Paragraph in "Performance Requirements" Article.
B.
Windborne-Debris-Impact-Resistant Laminated Glass: Comply with requirements specified
above for laminated glass except laminate glass with[ one of] the following to comply with
interlayer manufacturer's written instructions:
1.
2.
3.
4.
5.
2.6
Polyvinyl butyral interlayer.
Polyvinyl butyral interlayers reinforced with polyethylene terephthalate film.
Ionomeric polymer interlayer.
Cast-in-place and cured-transparent-resin interlayer.
Cast-in-place and cured-transparent-resin interlayer reinforced with polyethylene
terephthalate film.
INSULATING GLASS
A.
Insulating-Glass Units: Factory-assembled units consisting of sealed lites of glass separated by a
dehydrated interspace, qualified according to ASTM E 2190.
Retain one of five options in "Sealing System" Subparagraph below, or insert other combinations;
coordinate with manufacturers and products.
1.
Sealing System: Dual seal, with [manufacturer's standard] [polyisobutylene and
polysulfide] [polyisobutylene and silicone] [polyisobutylene and hot-melt butyl]
GLAZING
088000 - 13
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
[polyisobutylene and polyurethane] <Insert description> primary and secondary
sealants.
If retaining a specific spacer material, coordinate with manufacturers and products.
2.
Spacer: [Manufacturer's standard spacer material and construction] [Aluminum
with mill or clear anodic finish] [Aluminum with black, color anodic finish]
[Aluminum with bronze, color anodic finish] [Aluminum with powdered metal paint
finish in color selected by Architect] [Galvanized steel] [Stainless steel]
[Polypropylene-covered stainless steel in color selected by Architect] [Thermally
broken aluminum] [Nonmetallic laminate] [Nonmetallic tube] <Insert material>.
Revise "Desiccant" Subparagraph below if a specific type of desiccant is required.
3.
Desiccant: Molecular sieve or silica gel, or a blend of both.
2.7
GLAZING SEALANTS
A.
General:
1.
2.
Compatibility: Compatible with one another and with other materials they contact,
including glass products, seals of insulating-glass units, and glazing channel substrates,
under conditions of service and application, as demonstrated by sealant manufacturer
based on testing and field experience.
Suitability: Comply with sealant and glass manufacturers' written instructions for
selecting glazing sealants suitable for applications indicated and for conditions existing at
time of installation.
Subparagraph below applies to LEED 2009 NC, CI, and CS; LEED v4; IgCC; ASHRAE 189.1; and
Green Globes.
3.
Sealant shall have a VOC content of 250 g/L or less.
Subparagraph below applies to LEED 2009 for Schools Credit IEQ 4.1.
4.
Sealant shall comply with the testing and product requirements of the California
Department of Public Health's "Standard Method for the Testing and Evaluation of
Volatile Organic Chemical Emissions from Indoor Sources Using Environmental
Chambers."
5.
Colors of Exposed Glazing Sealants: [As indicated by manufacturer's designations]
[Match Architect's samples] [As selected by Architect from manufacturer's full
range].
Retain one or more of four "Glazing Sealant" paragraphs below. If retaining more than one, retain
"Applications" subparagraphs.
B.
Glazing Sealant: Neutral-curing silicone glazing sealant complying with ASTM C 920, Type S,
Grade NS, Class 100/50, Use NT.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
a.
GLAZING
Dow Corning Corporation.
088000 - 14
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
b.
c.
d.
e.
f.
g.
2.
C.
Applications: <Describe types of glazing applications where this sealant is required>.
Glazing Sealant: Neutral-curing silicone glazing sealant complying with ASTM C 920, Type S,
Grade NS, Class 50, Use NT.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
a.
b.
c.
d.
e.
f.
g.
h.
i.
2.
D.
BASF Corporation-Construction Systems.
Dow Corning Corporation.
GE Construction Sealants; Momentive Performance Materials Inc.
May National Associates, Inc.; a subsidiary of Sika Corporation.
Pecora Corporation.
Polymeric Systems, Inc.
Sika Corporation.
Tremco Incorporated.
<Insert manufacturer's name>.
Applications: <Describe types of glazing applications where this sealant is required>.
Glazing Sealant: Neutral-curing silicone glazing sealant complying with ASTM C 920, Type S,
Grade NS, Class 25, Use NT.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
a.
b.
c.
d.
e.
f.
g.
h.
i.
2.
E.
GE Construction Sealants; Momentive Performance Materials Inc.
May National Associates, Inc.; a subsidiary of Sika Corporation.
Pecora Corporation.
Sika Corporation.
Tremco Incorporated.
<Insert manufacturer's name>.
Bostik, Inc.
Dow Corning Corporation.
GE Construction Sealants; Momentive Performance Materials Inc.
May National Associates, Inc.; a subsidiary of Sika Corporation.
Polymeric Systems, Inc.
Schnee-Morehead, Inc., an ITW company.
Sika Corporation.
Tremco Incorporated.
<Insert manufacturer's name>.
Applications: <Describe types of glazing applications where this sealant is required>.
Glazing Sealant: Acid-curing silicone glazing sealant complying with ASTM C 920, Type S,
Grade NS, Class 25, Use NT.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
GLAZING
088000 - 15
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
2.
2.8
BASF Corporation-Construction Systems.
Bostik, Inc.
Dow Corning Corporation.
GE Construction Sealants; Momentive Performance Materials Inc.
May National Associates, Inc.; a subsidiary of Sika Corporation.
Pecora Corporation.
Polymeric Systems, Inc.
Schnee-Morehead, Inc., an ITW company.
Sika Corporation.
Tremco Incorporated.
<Insert manufacturer's name>.
Applications: <Describe types of glazing applications where this sealant is required>.
GLAZING TAPES
A.
Back-Bedding Mastic Glazing Tapes: Preformed, butyl-based, 100 percent solids elastomeric
tape; nonstaining and nonmigrating in contact with nonporous surfaces; with or without spacer
rod as recommended in writing by tape and glass manufacturers for application indicated; and
complying with ASTM C 1281 and AAMA 800 for products indicated below:
Retain one or more back-bedding tapes from subparagraphs below. AAMA 804.3 tape is for less-severe
back-bedding and drop-in, residential and light-commercial glazing applications. AAMA 806.3 tape is for
high-performance commercial glazing applications involving continuous pressure from gaskets or
pressure-generating stop designs. AAMA 807.3 tape is for commercial glazing applications not involving
continuous pressure from gaskets and stop designs.
1.
2.
3.
B.
Expanded Cellular Glazing Tapes: Closed-cell, PVC foam tapes; factory coated with adhesive
on both surfaces; and complying with AAMA 800 for the following types:
1.
2.
2.9
AAMA 804.3 tape, where indicated.
AAMA 806.3 tape, for glazing applications in which tape is subject to continuous
pressure.
AAMA 807.3 tape, for glazing applications in which tape is not subject to continuous
pressure.
AAMA 810.1, Type 1, for glazing applications in which tape acts as the primary sealant.
AAMA 810.1, Type 2, for glazing applications in which tape is used in combination with
a full bead of liquid sealant.
MISCELLANEOUS GLAZING MATERIALS
A.
General: Provide products of material, size, and shape complying with referenced glazing
standard, with requirements of manufacturers of glass and other glazing materials for
application indicated, and with a proven record of compatibility with surfaces contacted in
installation.
B.
Cleaners, Primers, and Sealers: Types recommended by sealant or gasket manufacturer.
GLAZING
088000 - 16
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
C.
Setting Blocks: Elastomeric material with a Shore, Type A durometer hardness of 85, plus or
minus 5.
D.
Spacers: Elastomeric blocks or continuous extrusions of hardness required by glass
manufacturer to maintain glass lites in place for installation indicated.
E.
Edge Blocks: Elastomeric material of hardness needed to limit glass lateral movement (side
walking).
Retain "Cylindrical Glazing Sealant Backing" Paragraph below if applicable for glazing channels.
F.
2.10
A.
Cylindrical Glazing Sealant Backing: ASTM C 1330, Type O (open-cell material), of size and
density to control glazing sealant depth and otherwise produce optimum glazing sealant
performance.
FABRICATION OF GLAZING UNITS
Fabricate glazing units in sizes required to fit openings indicated for Project, with edge and face
clearances, edge and surface conditions, and bite complying with written instructions of product
manufacturer and referenced glazing publications, to comply with system performance
requirements.
1.
Allow for thermal movements from ambient and surface temperature changes acting on
glass framing members and glazing components.
Differential values in "Temperature Change" Subparagraph below (for aluminum in particular) are
suitable for most of the United States.
a.
Temperature Change: [120 deg F (67 deg C), ambient; 180 deg F (100 deg C),
material surfaces] <Insert temperature change>.
Retain first paragraph below for butt-glazed lites.
B.
Clean-cut or flat-grind vertical edges of butt-glazed monolithic lites to produce square edges
with slight chamfers at junctions of edges and faces.
Retain paragraph below if any exposed edges or corners are required.
C.
Grind smooth and polish exposed glass edges and corners.
PART 3 - EXECUTION
3.1
EXAMINATION
A.
Examine framing, glazing channels, and stops, with Installer present, for compliance with the
following:
GLAZING
088000 - 17
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
1.
2.
3.
4.
B.
3.2
Manufacturing and installation tolerances, including those for size, squareness, and
offsets at corners.
Presence and functioning of weep systems.
Minimum required face and edge clearances.
Effective sealing between joints of glass-framing members.
Proceed with installation only after unsatisfactory conditions have been corrected.
PREPARATION
A.
Clean glazing channels and other framing members receiving glass immediately before glazing.
Remove coatings not firmly bonded to substrates.
B.
Examine glazing units to locate exterior and interior surfaces. Label or mark units as needed so
that exterior and interior surfaces are readily identifiable. Do not use materials that leave visible
marks in the completed Work.
3.3
GLAZING, GENERAL
A.
Comply with combined written instructions of manufacturers of glass, sealants, gaskets, and
other glazing materials, unless more stringent requirements are indicated, including those in
referenced glazing publications.
B.
Protect glass edges from damage during handling and installation. Remove damaged glass from
Project site and legally dispose of off Project site. Damaged glass includes glass with edge
damage or other imperfections that, when installed, could weaken glass, impair performance, or
impair appearance.
C.
Apply primers to joint surfaces where required for adhesion of sealants, as determined by
preconstruction testing.
D.
Install setting blocks in sill rabbets, sized and located to comply with referenced glazing
publications, unless otherwise required by glass manufacturer. Set blocks in thin course of
compatible sealant suitable for heel bead.
E.
Do not exceed edge pressures stipulated by glass manufacturers for installing glass lites.
F.
Provide spacers for glass lites where length plus width is larger than 50 inches (1270 mm).
1.
2.
GLAZING
Locate spacers directly opposite each other on both inside and outside faces of glass.
Install correct size and spacing to preserve required face clearances, unless gaskets and
glazing tapes are used that have demonstrated ability to maintain required face clearances
and to comply with system performance requirements.
Provide 1/8-inch (3-mm) minimum bite of spacers on glass and use thickness equal to
sealant width. With glazing tape, use thickness slightly less than final compressed
thickness of tape.
088000 - 18
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
G.
Provide edge blocking where indicated or needed to prevent glass lites from moving sideways
in glazing channel, as recommended in writing by glass manufacturer and according to
requirements in referenced glazing publications.
H.
Set glass lites in each series with uniform pattern, draw, bow, and similar characteristics.
I.
Set glass lites with proper orientation so that coatings face exterior or interior as specified.
Retain both paragraphs below if glazing with wedge-shaped gaskets is required for Project.
J.
Where wedge-shaped gaskets are driven into one side of channel to pressurize sealant or gasket
on opposite side, provide adequate anchorage so gasket cannot walk out when installation is
subjected to movement.
K.
Square cut wedge-shaped gaskets at corners and install gaskets in a manner recommended by
gasket manufacturer to prevent corners from pulling away; seal corner joints and butt joints with
sealant recommended by gasket manufacturer.
3.4
TAPE GLAZING
A.
Position tapes on fixed stops so that, when compressed by glass, their exposed edges are flush
with or protrude slightly above sightline of stops.
B.
Install tapes continuously, but not necessarily in one continuous length. Do not stretch tapes to
make them fit opening.
C.
Cover vertical framing joints by applying tapes to heads and sills first, then to jambs. Cover
horizontal framing joints by applying tapes to jambs, then to heads and sills.
D.
Place joints in tapes at corners of opening with adjoining lengths butted together, not lapped.
Seal joints in tapes with compatible sealant approved by tape manufacturer.
E.
Do not remove release paper from tape until right before each glazing unit is installed.
Delete first paragraph below if not required, or qualify by adding "where indicated" and indicate locations
on Drawings.
F.
Apply heel bead of elastomeric sealant.
G.
Center glass lites in openings on setting blocks, and press firmly against tape by inserting dense
compression gaskets formed and installed to lock in place against faces of removable stops.
Start gasket applications at corners and work toward centers of openings.
Delete paragraph below if not applicable or revise; it assumes fixed stop is located on exterior.
H.
Apply cap bead of elastomeric sealant over exposed edge of tape.
GLAZING
088000 - 19
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
3.5
GASKET GLAZING (DRY)
A.
Cut compression gaskets to lengths recommended by gasket manufacturer to fit openings
exactly, with allowance for stretch during installation.
B.
Insert soft compression gasket between glass and frame or fixed stop so it is securely in place
with joints miter cut and bonded together at corners.
C.
Installation with Drive-in Wedge Gaskets: Center glass lites in openings on setting blocks, and
press firmly against soft compression gasket by inserting dense compression gaskets formed and
installed to lock in place against faces of removable stops. Start gasket applications at corners
and work toward centers of openings. Compress gaskets to produce a weathertight seal without
developing bending stresses in glass. Seal gasket joints with sealant recommended by gasket
manufacturer.
D.
Installation with Pressure-Glazing Stops: Center glass lites in openings on setting blocks, and
press firmly against soft compression gasket. Install dense compression gaskets and pressureglazing stops, applying pressure uniformly to compression gaskets. Compress gaskets to
produce a weathertight seal without developing bending stresses in glass. Seal gasket joints with
sealant recommended by gasket manufacturer.
E.
Install gaskets so they protrude past face of glazing stops.
3.6
SEALANT GLAZING (WET)
A.
Install continuous spacers, or spacers combined with cylindrical sealant backing, between glass
lites and glazing stops to maintain glass face clearances and to prevent sealant from extruding
into glass channel and blocking weep systems until sealants cure. Secure spacers or spacers and
backings in place and in position to control depth of installed sealant relative to edge clearance
for optimum sealant performance.
B.
Force sealants into glazing channels to eliminate voids and to ensure complete wetting or bond
of sealant to glass and channel surfaces.
C.
Tool exposed surfaces of sealants to provide a substantial wash away from glass.
3.7
CLEANING AND PROTECTION
A.
Immediately after installation remove nonpermanent labels and clean surfaces.
B.
Protect glass from contact with contaminating substances resulting from construction
operations. Examine glass surfaces adjacent to or below exterior concrete and other masonry
surfaces at frequent intervals during construction, but not less than once a month, for buildup of
dirt, scum, alkaline deposits, or stains.
1.
If, despite such protection, contaminating substances do come into contact with glass,
remove substances immediately as recommended in writing by glass manufacturer.
Remove and replace glass that cannot be cleaned without damage to coatings.
GLAZING
088000 - 20
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
C.
Remove and replace glass that is damaged during construction period.
Retain paragraph below to suit Project. Delete if covered in Section 017700 "Closeout Procedures."
D.
3.8
Wash glass on both exposed surfaces not more than four days before date scheduled for
inspections that establish date of Substantial Completion. Wash glass as recommended in
writing by glass manufacturer.
MONOLITHIC GLASS SCHEDULE
Monolithic glass refers to glass that is made in a single sheet without being laminated.
Copy paragraphs below and re-edit for each type of glass required.
Insert drawing designation. Use these designations on Drawings to identify each glass type.
If thickness designations are indicated on Drawings or are determined solely by compliance with
"Performance Requirements" Article, delete "Minimum Thickness" subparagraphs.
A.
Glass Type [GL-<#>]: Clear [annealed] [heat-strengthened] [fully tempered] float glass.
1.
Minimum Thickness: [6 mm] <Insert thickness designation>.
Retain subparagraph below if required; "fully tempered" option must be retained in paragraph above if
safety glazing is required.
2.
Safety glazing required.
B.
Glass Type [GL-<#>]: Ultraclear [annealed] [heat-strengthened] [fully tempered] float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
Basis-of-Design Product: AGC Glass Company North America; Krystal Klear.
Minimum Thickness: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert thickness
designation>.
Retain subparagraph below if required; "fully tempered" option must be retained in paragraph above if
safety glazing is required.
3.
Safety glazing required.
C.
Glass Type [GL-<#>]: Sputtered Coated Low-Emissivity Clear Vision Glass.
1.
Basis-of-Design Product: AGC Glass Company North America; [Energy Select 28]
[Energy Select 31] [Energy Select 36] [Energy Select 40] [Energy Select R42]
[Energy Select 63].
Consider retaining option in first subparagraph below if applicable; option is based on
ASTM C 1376.Kind: Kind CV (coated vision glass)[, except that Kind CO (coated overhead glass)
GLAZING
088000 - 21
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
3.
4.
5.
D.
may be used where the lower edge of the glass is more than 6 feet (1.8 m) above the
adjacent floor level or cannot be approached closer than 10 feet (3.0 m)].
Coating Color: Neutral
Glass: Clear float.
Minimum Thickness: [6 mm] <Insert thickness designation>.
Glass Type [GL-<#>]: Sputtered Coated Low-Emissivity Tinted Vision Glass.
1.
Basis-of-Design Product: AGC Glass Company North America; [Energy Select 20]
[Energy Select 25].
Consider retaining option in first subparagraph below if applicable; option is based on ASTM C 1376.
2.
Kind: Kind CV (coated vision glass)[, except that Kind CO (coated overhead glass)
may be used where the lower edge of the glass is more than 6 feet (1.8 m) above the
adjacent floor level or cannot be approached closer than 10 feet (3.0 m)].
3.
Coating Color: Neutral
4.
Glass: Tinted float.
5.
Tint Color: [Pure Grey] [Pure Bronze] [Meadow Green] [Forest Green] <Insert
color>.
6.
Minimum Thickness: [6 mm] <Insert thickness designation>.
E.
Glass Type [GL-<#>]: Pyrolytic Coated Low-Emissivity Clear Vision Glass.
1.
Basis-of-Design Product: AGC Glass Company North America; Energy Select 73.
Consider retaining option in first subparagraph below if applicable; option is based on ASTM C 1376.
2.
Kind: Kind CV (coated vision glass)[, except that Kind CO (coated overhead glass)
may be used where the lower edge of the glass is more than 6 feet (1.8 m) above the
adjacent floor level or cannot be approached closer than 10 feet (3.0 m)].
3.
Coating Color: Neutral
4.
Glass: Clear float.
5.
Minimum Thickness: [6 mm] <Insert thickness designation>.
F.
Glass Type [GL-<#>]: Pyrolytic Coated Low-Emissivity Tinted Vision Glass.
1.
Basis-of-Design Product: AGC Glass Company North America, Sunergy.
Consider retaining option in first subparagraph below if applicable; option is based on ASTM C 1376.
2.
Kind: Kind CV (coated vision glass)[, except that Kind CO (coated overhead glass)
may be used where the lower edge of the glass is more than 6 feet (1.8 m) above the
adjacent floor level or cannot be approached closer than 10 feet (3.0 m)].
3.
Coating Color: Neutral
4.
Glass: Tinted float.
5.
Tint Color: [Green] [Grey] [Azur] [Dark Blue].
6.
Minimum Thickness: [6 mm] <Insert thickness designation>.
G.
Glass Type [GL-<#>]: Tinted [annealed] [heat-strengthened] [fully tempered] float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
GLAZING
088000 - 22
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
1.
2.
3.
Basis-of-Design Product: AGC Glass Company North America; Solarshield.
Tint Color: Solarshield [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green]
[Forest Green] [Pure Blue] [Sky Blue] [Midnight Blue] <Insert color>.
Minimum Thickness: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert thickness
designation>.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
4.
Winter Nighttime U-Factor: <Insert value> maximum.
5.
Summer Daytime U-Factor: <Insert value> maximum.
6.
Visible Light Transmittance: <Insert number> percent minimum.
7.
Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required; "fully tempered" option must be retained in paragraph above if
safety glazing is required.
8.
Safety glazing required.
H.
Glass Type [GL-<#>]: Ceramic-coated vision glass; [heat-strengthened] [fully tempered]
float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
AGC Glass Company North America does not produce silk-screened glass; however, AGC Glass
Company North America’s glazing products may be used in the fabrication of silk-screened glass by an
AGC Glass Company North America approved fabricator.
1.
2.
3.
4.
5.
6.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Glass: [Clear] [Ultraclear] [Tinted] float glass.
Tint Color: Solarshield [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green]
[Forest Green] [Pure Blue] [Sky Blue] [Midnight Blue]<Insert color>.
Ceramic Coating Color and Pattern: [As selected by Architect from manufacturer's
full range] [Match Architect’s samples] <Insert one manufacturer’s color and
pattern designation if matching is required> <Insert manufacturer; color and
pattern designation> [1/8 inch Dots on 1/4 inch Centers (40% Coverage)] [1/8 inch
Lines on 1/4 inch Centers (50% Coverage)] [1/8 inch Holes on 1/4 inch Centers
(60% Coverage)].
Minimum Thickness: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert thickness
designation>.
Coating Location: Second surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
7.
Winter Nighttime U-Factor: <Insert value> maximum.
8.
Summer Daytime U-Factor: <Insert value> maximum.
9.
Visible Light Transmittance: <Insert number> percent minimum.
10. Solar Heat Gain Coefficient: <Insert value> maximum.
GLAZING
088000 - 23
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Retain subparagraph below if required; "fully tempered" option must be retained in paragraph above if
safety glazing is required.
11. Safety glazing required.
I.
Glass Type [GL-<#>]: Reflective-coated vision glass; [annealed] [heat-strengthened] [fully
tempered] float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
Basis-of-Design Product: AGC Glass Company North America; [Stopsol Classic]
[Stopsol SuperSilver] [Stopsol SilverLight].
Consider retaining option in "Kind" Subparagraph below if applicable; option is based on ASTM C 1376.
2.
Kind: Kind CV (coated vision glass)[, except that Kind CO (coated overhead glass)
may be used where the lower edge of the glass is more than 6 feet (1.8 m) above the
adjacent floor level or cannot be approached closer than 10 feet (3.0 m)].
Pyrolytic coatings may be used on either the first or the second surface of monolithic-glass lites.
Sputtered coatings may only be used with monolithic glass if recommended by manufacturer, and then
only on the second surface.
3.
Coating Type: Pyrolytic.
Retain one color from options in "Coating Color" Subparagraph below. Not all sputtered-coating colors
are suitable for monolithic applications and must be on second surface for monolithic applications.
4.
Coating Color: [Classic - Gold] [SuperSilver - Pewter] [SilverLight - Silver] <Insert
color>.
5.
Glass: [Clear] [Tinted] float glass.
Retain one of three "Tint Color" subparagraphs below to correspond with AGC Glass Company North
America product selected in "Basis-of-Design Product" subparagraph above.
6.
Tint Color, Stopsol Classic: [Clear] [Dark Blue] [Bronze] [Green] [Grey].
7.
Tint Color, Stopsol SuperSilver: [Clear] [Green] [Grey] [Dark Blue].
8.
Tint Color, Stopsol SilverLight: Priva Blue.
9.
Minimum Thickness: [6 mm] <Insert thickness designation>.
10. Coating Location: [First][Second] surface.
Insert performance properties, if required, in "Outdoor Visible Reflectance," "Winter Nighttime UFactor," "Summer Daytime U-Factor," "Visible Light Transmittance," and "Solar Heat Gain Coefficient"
subparagraphs below to suit product(s).
11. Outdoor Visible Reflectance: <Insert number> percent maximum.
12. Winter Nighttime U-Factor: <Insert value> maximum.
13. Summer Daytime U-Factor: <Insert value> maximum.
14. Visible Light Transmittance: <Insert number> percent minimum.
15. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain "Low-Maintenance Coating" Subparagraph below only with sputter-coated clear float glass and
only after verifying availability.
GLAZING
088000 - 24
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
16.
Low-Maintenance Coating: Pyrolytic coating on first surface.
Retain subparagraph below if required; "fully tempered" option must be retained in paragraph above if
safety glazing is required.
17. Safety glazing required.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
J.
Glass Type [GL-<#>]: Ceramic-coated spandrel glass; [heat-strengthened] [fully tempered]
float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Glass: [Clear] [Ultraclear] [Tinted] float glass.
Tint Color: Solarshield [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green]
[Forest Green] [Pure Blue] [Sky Blue] [Midnight Blue] <Insert color>.
Coating Color: [As selected by Architect from manufacturer's full range] [Green]
[Grey] [Black] [Warm Grey] [Charcoal] [Bronze] [Lava Bronze] [Blue] [Dark
Green] [White] [Privacy Grey].
Minimum Thickness: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert thickness
designation>.
Coating Location: Second surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor" and "Summer Daytime UFactor" subparagraphs below to suit product(s).
7.
Winter Nighttime U-Factor: <Insert value> maximum.
8.
Summer Daytime U-Factor: <Insert value> maximum.
Requirement in "Fallout Resistance" Subparagraph below is optional test in ASTM C 1048 and is not
required by the IBC.
9.
Fallout Resistance: Passes fallout-resistance test in ASTM C 1048 for an assembly of
glass and adhered reinforcing material.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
K.
Glass Type [GL-<#>]: Silicone-coated spandrel glass; [heat-strengthened] [fully tempered]
float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>
GLAZING
088000 - 25
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
2.
3.
4.
5.
6.
Glass: [Clear] [Ultraclear] [Tinted] float glass.
Tint Color: Solarshield [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green]
[Forest Green] [Pure Blue] [Sky Blue] [Midnight Blue] <Insert color>.
Coating Color: [As selected by Architect from manufacturer's full range] [Green]
[Grey] [Bronze] [Warm Grey] [Black].
Minimum Thickness: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert thickness
designation>.
Coating Location: Second surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor" and "Summer Daytime UFactor" subparagraphs below to suit product(s).
7.
Winter Nighttime U-Factor: <Insert value> maximum.
8.
Summer Daytime U-Factor: <Insert value> maximum.
Requirement in "Fallout Resistance" Subparagraph below is optional test in ASTM C 1048 and is not
required by the IBC.
9.
Fallout Resistance: Passes fallout-resistance test in ASTM C 1048 for an assembly of
glass and adhered reinforcing material.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
L.
Glass Type [GL-<#>]: Reflective-coated spandrel glass; [heat-strengthened] [fully tempered]
float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
Basis-of-Design Product: AGC Glass Company North America; Stopsol [Classic]
[SuperSilver] [SilverLight].
Pyrolytic coatings may be used on either the first or the second surface of monolithic-glass lites.
Sputtered coatings may only be used with monolithic glass if recommended by manufacturer, and then
only on the second surface.
2.
Coating Type: Pyrolytic.
Retain one color from options in "Coating Color" Subparagraph below. Not all sputtered-coating colors
are suitable for monolithic applications and must be on second surface for monolithic applications.
3.
Coating Color: [Classic - Gold] [SuperSilver - Pewter] [SilverLight - Silver] <Insert
color>.
4.
Glass: [Clear] [Tinted] float glass.
Retain one of three "Tint Color" subparagraphs below to correspond with AGC Glass Company North
America product selected in "Basis-of-Design Product" subparagraph above.
5.
Tint Color, Stopsol Classic: [Clear] [Green] [Grey] [Bronze] [Dark Blue].
6.
Tint Color, Stopsol SuperSilver: [Clear] [Green] [Grey] [Dark Blue].
7.
Tint Color, Stopsol SilverLight: Priva Blue.
GLAZING
088000 - 26
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
8.
9.
Minimum Thickness: [6 mm] <Insert thickness designation>.
Coating Location: [First] [Second] surface.
Insert performance properties, if required, in "Outdoor Visible Reflectance," "Winter Nighttime UFactor" and "Summer Daytime U-Factor" subparagraphs below to suit product(s).
10. Outdoor Visible Reflectance: <Insert number> percent maximum.
11. Winter Nighttime U-Factor: <Insert value> maximum.
12. Summer Daytime U-Factor: <Insert value> maximum.
Requirement in "Fallout Resistance" Subparagraph below is optional test in ASTM C 1048 and is not
required by the IBC.
13. Fallout Resistance: Passes fallout-resistance test in ASTM C 1048 for an assembly of
glass and adhered reinforcing material.
Retain subparagraph below if read-through is not controlled by another means. Opacifier below can be
applied only over reflective coating; verify availability with glass manufacturers.
14. Factory apply manufacturer's standard opacifier of the following material to coated
second surface of lites, with resulting products complying with Specification No. 89-1-6
in GANA's "Engineering Standards Manual":
Retain one of two subparagraphs below. If retaining a specific material, coordinate with product listing
and verify, with glass manufacturer, availability and suitability for installation indicated.
a.
b.
3.9
Manufacturer's standard opacifier material.
Polyester film laminated to glass with solvent-based adhesive.
LAMINATED GLASS SCHEDULE
Copy paragraphs below and re-edit for each type of glass required.
Insert drawing designation. Use these designations on Drawings to identify each glass type.
If thickness designations are indicated on Drawings or are determined solely by compliance with
"Performance Requirements" Article, delete "Minimum Thickness of Each Glass Ply" subparagraphs.
AGC Glass Company North America's Defender Impact laminated glass, with 0.060 or 0.090 interlayers,
provides small and large missile protection and is typically specified in section 088853 "Security
Glazing".
A.
Glass Type [GL-<#>]: Clear laminated glass with two plies of [annealed] [heat-strengthened]
[fully tempered] [ultraclear annealed] [ultraclear heat-strengthened] [ultraclear fully
tempered] float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
Basis-of-Design Product: Clear laminated glass as fabricated by an AGC Glass Company
North America approved Fabricator.
GLAZING
088000 - 27
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
2.
3.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] [As
indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch (2.29
mm)].
Retain subparagraph below if required.
4.
Safety glazing required.
B.
Glass Type [GL-<#>]: Tinted laminated glass with two plies of [annealed] [heatstrengthened] [fully tempered] float glass with outer ply tinted and inner ply clear.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
Basis-of-Design Product: Tinted laminated glass as fabricated by an AGC Glass
Company North America approved Fabricator.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] [As
indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch (2.29
mm)].
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
5.
Winter Nighttime U-Factor: <Insert value> maximum.
6.
Summer Daytime U-Factor: <Insert value> maximum.
7.
Visible Light Transmittance: <Insert number> percent minimum.
8.
Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required.
9.
Safety glazing required.
Samples for verification or mockups should be used for laminated glass that has the coating facing the
plastic interlayer due to potential color shift.
C.
Glass Type [GL-<#>]: Ceramic-coated, laminated vision glass with two plies of [heatstrengthened] [fully tempered] float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
GLAZING
Basis-of-Design Product: Ceramic-coated, laminated vision glass as fabricated by an
AGC Glass Company North America approved Fabricator.
Outer Ply: [Clear] [Ultraclear] [Tinted] float glass.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
Inner Ply: [Clear] [Ultraclear] float glass.
Ceramic Coating Color and Pattern: [As selected by Architect from manufacturer's
full range] [Match Architect's samples] <Insert one manufacturer's color and
088000 - 28
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
6.
7.
8.
pattern designation if matching is required> <Insert manufacturer; color and
pattern designation>.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] [As
indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch (2.29
mm)].
Coating Location: [Second] [Third] [Fourth] surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
9.
Winter Nighttime U-Factor: <Insert value> maximum.
10. Summer Daytime U-Factor: <Insert value> maximum.
11. Visible Light Transmittance: <Insert number> percent minimum.
12. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required.
13. Safety glazing required.
Samples for verification or mockups should be used for laminated glass that has the coating facing the
plastic interlayer due to potential color shift.
D.
Glass Type [GL-<#>]: Reflective-coated, laminated vision glass with two plies of [heatstrengthened] [fully tempered] float glass with inner ply clear.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
Basis-of-Design Product: Reflective-coated, laminated vision glass as fabricated by an
AGC Glass Company North America approved Fabricator.
Consider retaining option in "Kind" Subparagraph below if applicable; option is based on ASTM C 1376.
2.
Kind: Kind CV (coated vision glass)[, except that Kind CO (coated overhead glass)
may be used where the lower edge of the glass is more than 6 feet (1.8 m) above the
adjacent floor level or cannot be approached closer than 10 feet (3.0 m)].
Pyrolytic coatings may be used on any surface of laminated glass. Sputtered coatings may only be used on
the second or third surface of laminated glass.
3.
Coating Type: [Pyrolytic] [Sputter-coating (vacuum deposition process)].
Retain one color from options in "Coating Color" Subparagraph below. Not all sputtered-coating colors
are suitable for monolithic applications and must be on second surface for monolithic applications.
4.
Coating Color: [Gold] [Pewter] [Silver] <Insert color>.
5.
Outer Ply: [Clear] [Tinted] float glass.
6.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
7.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] [As
indicated] <Insert thickness designation>.
8.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch (2.29
mm)].
9.
Coating Location: Second surface.
GLAZING
088000 - 29
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Insert performance properties, if required, in "Outdoor Visible Reflectance," "Winter Nighttime UFactor," "Summer Daytime U-Factor," "Visible Light Transmittance," and "Solar Heat Gain Coefficient"
subparagraphs below to suit product(s).
10. Outdoor Visible Reflectance: <Insert number> percent maximum.
11. Winter Nighttime U-Factor: <Insert value> maximum.
12. Summer Daytime U-Factor: <Insert value> maximum.
13. Visible Light Transmittance: <Insert number> percent minimum.
14. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain "Low-Maintenance Coating" Subparagraph below only with sputter-coated clear float glass and
only after verifying availability.
15. Low-Maintenance Coating: Pyrolytic coating on first surface.
Retain subparagraph below if required.
16. Safety glazing required.
Samples for verification or mockups should be used for laminated glass that has the coating facing the
plastic interlayer due to potential color shift.
E.
Glass Type [GL-<#>]: Low-E-coated, laminated vision glass with two plies of clear [annealed]
[heat-strengthened] [fully tempered] float glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
Basis-of-Design Product: Low-E-coated, laminated vision glass as fabricated by an AGC
Glass Company North America approved Fabricator.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] [As
indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch (2.29
mm)].
Low-E Coating: [Pyrolytic on second] [Sputtered on second] surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
5.
Winter Nighttime U-Factor: <Insert value> maximum.
6.
Summer Daytime U-Factor: <Insert value> maximum.
7.
Visible Light Transmittance: <Insert number> percent minimum.
8.
Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required.
9.
Safety glazing required.
Samples for verification or mockups should be used for laminated glass that has the coating facing the
plastic interlayer due to potential color shift.
F.
Glass Type [GL-<#>]: Reflective-coated, laminated spandrel glass with two plies of [heatstrengthened] [fully tempered] float glass with inner ply clear.
GLAZING
088000 - 30
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
1.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Pyrolytic coatings may be used on any surface of laminated glass. Sputtered coatings may only be used on
the second or third surface of laminated glass.
2.
Coating Type: [Pyrolytic] [Sputter-coating (vacuum deposition process)].
Retain one color from options in "Coating Color" Subparagraph below. Not all sputtered-coating colors
are suitable for monolithic applications and must be on second surface for monolithic applications.
3.
Coating Color: [Gold] [Pewter] [Silver] <Insert color>.
4.
Outer Ply: [Clear] [Tinted] float glass.
5.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
6.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] [As
indicated] <Insert thickness designation>.
7.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch (2.29
mm)].
8.
Coating Location: [Second] [Third] [Fourth] surface.
Insert performance properties, if required, in "Outdoor Visible Reflectance," "Winter Nighttime UFactor," and "Summer Daytime U-Factor" subparagraphs below to suit product(s).
9.
Outdoor Visible Reflectance: <Insert number> percent maximum.
10. Winter Nighttime U-Factor: <Insert value> maximum.
11. Summer Daytime U-Factor: <Insert value> maximum.
3.10
INSULATING GLASS SCHEDULE
Copy paragraphs below and re-edit for each type of glass required.
Insert drawing designation. Use these designations on Drawings to identify each glass type.
If thickness designations are indicated on Drawings or are determined solely by compliance with
"Performance Requirements" Article, delete "Minimum Thickness of Each Glass Lite" subparagraphs.
A.
Glass Type [GL-<#>]: Clear insulating glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Overall Unit Thickness: [1 inch (25 mm)] [5/8 inch (16 mm)] <Insert dimension>.
GLAZING
088000 - 31
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
3.
4.
5.
6.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: [Annealed] [Heat-strengthened] [Fully tempered] float glass.
Interspace Content: [Air] [Argon].
Indoor Lite: [Annealed] [Heat-strengthened] [Fully tempered] float glass.
Insert performance properties, if required, in "Winter Nighttime U-Factor" and "Summer Daytime UFactor" subparagraphs below to suit product(s).
7.
Winter Nighttime U-Factor: <Insert value> maximum.
8.
Summer Daytime U-Factor: <Insert value> maximum.
Retain subparagraph below if required; "fully tempered" option must be retained in "Outdoor Lite" and
Indoor Lite" subparagraphs if safety glazing is required.
9.
Safety glazing required.
B.
Glass Type [GL-<#>]: Ultraclear insulating glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
Basis-of-Design Product: AGC Glass Company North America; Krystal Klear.
Overall Unit Thickness: [1 inch (25 mm)] [5/8 inch (16 mm)] <Insert dimension>.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: Ultraclear [annealed] [heat-strengthened] [fully tempered] float glass.
Interspace Content: [Air] [Argon].
Indoor Lite: Ultraclear [annealed] [heat-strengthened] [fully tempered] float glass.
Insert performance properties, if required, in "Winter Nighttime U-Factor" and "Summer Daytime UFactor" subparagraphs below to suit product(s).
7.
Winter Nighttime U-Factor: <Insert value> maximum.
8.
Summer Daytime U-Factor: <Insert value> maximum.
Retain subparagraph below if required; "fully tempered" option must be retained in "Outdoor Lite" and
Indoor Lite" subparagraphs if safety glazing is required.
9.
Safety glazing required.
C.
Glass Type [GL-<#>]: Low-E-coated, clear insulating glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
5.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Overall Unit Thickness: [1 inch (25 mm)] [5/8 inch (16 mm)] <Insert dimension>.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: [Annealed] [Heat-strengthened] [Fully tempered] [Ultraclear
annealed] [Ultraclear heat-strengthened] [Ultraclear fully tempered] float glass.
Interspace Content: [Air] [Argon].
GLAZING
088000 - 32
2.
3.
4.
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
6.
7.
Indoor Lite: [Annealed] [Heat-strengthened] [Fully tempered] [Ultraclear annealed]
[Ultraclear heat-strengthened] [Ultraclear fully tempered] float glass.
Low-E Coating: [Pyrolytic on second] [Pyrolytic on third] [Sputtered on second]
[Sputtered on third] [Pyrolytic or sputtered on second or third] surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
8.
Winter Nighttime U-Factor: <Insert value> maximum.
9.
Summer Daytime U-Factor: <Insert value> maximum.
10. Visible Light Transmittance: <Insert number> percent minimum.
11. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required; "fully tempered" or "ultraclear fully tempered" option must be
retained in "Outdoor Lite" and Indoor Lite" subparagraphs if safety glazing is required.
12. Safety glazing required.
13.
D.
Glass Type [GL-<#>]: Tinted insulating glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
7.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Overall Unit Thickness: [1 inch (25 mm)] [5/8 inch (16 mm)] <Insert dimension>.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: Tinted [annealed] [heat-strengthened] [fully tempered] float glass.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
Interspace Content: [Air] [Argon].
Indoor Lite: Clear [annealed] [heat-strengthened] [fully tempered] float glass.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
8.
Winter Nighttime U-Factor: <Insert value> maximum.
9.
Summer Daytime U-Factor: <Insert value> maximum.
10. Visible Light Transmittance: <Insert number> percent minimum.
11. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required; "fully tempered" option must be retained in "Outdoor Lite" and
Indoor Lite" subparagraphs if safety glazing is required.
12. Safety glazing required.
E.
Glass Type [GL-<#>]: Low-E-coated, tinted insulating glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
GLAZING
088000 - 33
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
1.
2.
3.
4.
5.
6.
7.
8.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Overall Unit Thickness: [1 inch (25 mm)] [5/8 inch (16 mm)] <Insert dimension>.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: Tinted [annealed] [heat-strengthened] [fully tempered] float glass.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
Interspace Content: [Air] [Argon].
Indoor Lite: Clear [annealed] [heat-strengthened] [fully tempered] float glass.
Low-E Coating: [Pyrolytic low-E on second surface] [Pyrolytic low-E on third
surface] [Sputtered on second surface] [Sputtered on third surface] [Pyrolytic or
sputtered on second or third surface] [Pyrolytic low-E in combination with Energy
Select 73 Pyrolytic low-E on second and fourth surfaces] [Combined with sputter
coated glass on second surface and pyrolytic on fourth surface (U4 4th Surface
Technology by AGC)].
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
9.
Winter Nighttime U-Factor: <Insert value> maximum.
10. Summer Daytime U-Factor: <Insert value> maximum.
11. Visible Light Transmittance: <Insert number> percent minimum.
12. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required; "fully tempered" option must be retained in "Outdoor Lite" and
Indoor Lite" subparagraphs if safety glazing is required.
13. Safety glazing required.
AGC Glass Company North America does not produce silk-screened glass; however, AGC Glass
Company North America’s glazing products may be used in the fabrication of silk-screened glass by an
AGC Glass Company North America approved fabricator.
F.
Glass Type [GL-<#>]: Ceramic-coated, silk-screened, low-E, insulating vision glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
GLAZING
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Ceramic Coating Color and Pattern: [As selected by Architect from manufacturer's
full range] [Match Architect's samples] <Insert one manufacturer's color and
pattern designation if matching is required> <Insert manufacturer; color and
pattern designation>.
Overall Unit Thickness: [1 inch (25 mm)] [5/8 inch (16 mm)] <Insert dimension>.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: [Clear] [Ultraclear] [Tinted] [annealed] [heat-strengthened] [fully
tempered] float glass.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
088000 - 34
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
7.
8.
9.
10.
Interspace Content: [Air] [Argon].
Indoor Lite: [Clear] [Ultraclear] [annealed] [heat-strengthened] [fully tempered]
float glass.
Silk-screened Ceramic Coating Location: [Second] [Third] [Fourth] surface.
Low-E Coating: [Pyrolytic on second] [Pyrolytic on third] [Sputtered on second]
[Sputtered on third] [Pyrolytic or sputtered on second and third] surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
11. Winter Nighttime U-Factor: <Insert value> maximum.
12. Summer Daytime U-Factor: <Insert value> maximum.
13. Visible Light Transmittance: <Insert number> percent minimum.
14. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required; "fully tempered" or "ultraclear fully tempered" option must be
retained in "Outdoor Lite" and Indoor Lite" subparagraphs if safety glazing is required.
15. Safety glazing required.
G.
Glass Type [GL-<#>]: Reflective-coated, insulating glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Consider retaining option in "Kind" Subparagraph below if applicable; option is based on ASTM C 1376.
2.
Kind: Kind CV (coated vision glass)[, except that Kind CO (coated overhead glass)
may be used where the lower edge of the glass is more than 6 feet (1.8 m) above the
adjacent floor level or cannot be approached closer than 10 feet (3.0 m)].
Pyrolytic coatings may be used on any surface of insulating glass. Sputtered coatings may only be used
on the second or third surface of insulating glass.
3.
Coating Type: [Pyrolytic] [Sputter-coating (vacuum deposition process)].
Retain one color from options in "Coating Color" Subparagraph below. Not all sputtered-coating colors
are suitable for monolithic applications and must be on second surface for monolithic applications.
4.
Coating Color: [Gold] [Pewter] [Silver] <Insert color>.
5.
Overall Unit Thickness: [1 inch (25 mm)] [5/8 inch (16 mm)] <Insert dimension>.
6.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
7.
Outdoor Lite: [Clear] [Tinted] [annealed] [heat-strengthened] [fully tempered] float
glass.
8.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
9.
Interspace Content: [Air] [Argon].
10. Indoor Lite: Clear [annealed] [heat-strengthened] [fully tempered] float glass.
Pyrolytic coatings may be used on any surface of insulating glass. Sputtered coatings may only be used
on the second or third surface of insulating glass.
GLAZING
088000 - 35
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
11.
12.
Reflective Coating Location: [First] [Second] [Third] surface.
Low-E Coating: [Pyrolytic on second] [Pyrolytic on third] [Sputtered on second]
[Sputtered on third] [Pyrolytic or sputtered on second or third] surface.
Insert performance properties, if required, in "Outdoor Visible Reflectance," "Winter Nighttime UFactor," "Summer Daytime U-Factor," "Visible Light Transmittance," and "Solar Heat Gain Coefficient"
subparagraphs below to suit product(s).
13. Outdoor Visible Reflectance: <Insert number> percent maximum.
14. Winter Nighttime U-Factor: <Insert value> maximum.
15. Summer Daytime U-Factor: <Insert value> maximum.
16. Visible Light Transmittance: <Insert number> percent minimum.
17. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required; "fully tempered" option must be retained in "Outdoor Lite" and
Indoor Lite" subparagraphs if safety glazing is required.
18. Safety glazing required.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
H.
Glass Type [GL-<#>]: [Ceramic] [Silicone]-coated, insulating spandrel glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Coating Color: [As selected by Architect from manufacturer's full range] [Match
Architect's samples] <Insert one manufacturer's color designation if matching is
required> <Insert manufacturer; color designation>.
Overall Unit Thickness: [1 inch (25 mm)] <Insert dimension>.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: [Clear] [Ultraclear] [annealed] [heat-strengthened] [fully tempered]
float glass.
Interspace Content: [Air] [Argon].
Retain "heat-strengthened" or "fully tempered" option in "Indoor Lite" Subparagraph below for ceramiccoated, insulating spandrel glass.
7.
Indoor Lite: [Clear] [Ultraclear] [annealed] [heat-strengthened] [fully tempered]
float glass.
8.
Spandrel Coating Location: Fourth surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor" and "Summer Daytime UFactor" subparagraphs below to suit product(s).
9.
Winter Nighttime U-Factor: <Insert value> maximum.
10. Summer Daytime U-Factor: <Insert value> maximum.
GLAZING
088000 - 36
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
I.
Glass Type [GL-<#>]: [Ceramic] [Silicone]-coated, low-E, insulating spandrel glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Coating Color: [As selected by Architect from manufacturer's full range] [Match
Architect's samples] <Insert one manufacturer's color designation if matching is
required> <Insert manufacturer; color designation>.
Overall Unit Thickness: [1 inch (25 mm)] <Insert dimension>.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: [Annealed] [Heat-strengthened] [Fully tempered] [Ultraclear
annealed] [Ultraclear heat-strengthened] [Ultraclear fully tempered] float glass.
Interspace Content: [Air] [Argon].
Retain "heat-strengthened" or "fully tempered" option in "Indoor Lite" Subparagraph below for ceramiccoated, low-E, insulating spandrel glass.
7.
Indoor Lite: [Annealed] [Heat-strengthened] [Fully tempered] [Ultraclear annealed]
[Ultraclear heat-strengthened] [Ultraclear fully tempered] float glass.
8.
Low-E Coating: [Pyrolytic on second] [Pyrolytic on third] [Sputtered on second]
[Sputtered on third] [Pyrolytic or sputtered on second or third] surface.
9.
Opaque Coating Location: Fourth surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor" and "Summer Daytime UFactor" subparagraphs below to suit product(s).
10. Winter Nighttime U-Factor: <Insert value> maximum.
11. Summer Daytime U-Factor: <Insert value> maximum.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
J.
Glass Type [GL-<#>]: [Ceramic-coated] [Silicone-coated], tinted, insulating spandrel glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
3.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Coating Color: [As selected by Architect from manufacturer's full range] [Match
Architect's samples] <Insert one manufacturer's color designation if matching is
required> <Insert manufacturer; color designation>.
Overall Unit Thickness: [1 inch (25 mm)] <Insert dimension>.
GLAZING
088000 - 37
2.
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
4.
5.
6.
7.
Minimum Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: Tinted [annealed] [heat-strengthened] [fully tempered] float glass.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
Interspace Content: [Air] [Argon].
Retain "heat-strengthened" or "fully tempered" option in "Indoor Lite" Subparagraph below for ceramiccoated, tinted, insulating spandrel glass.
8.
Indoor Lite: Clear [annealed] [heat-strengthened] [fully tempered] float glass.
9.
Spandrel Coating Location: Fourth surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor" and "Summer Daytime UFactor" subparagraphs below to suit product(s).
10. Winter Nighttime U-Factor: <Insert value> maximum.
11. Summer Daytime U-Factor: <Insert value> maximum.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
K.
Glass Type [GL-<#>]:
spandrel glass.
1.
2.
3.
4.
5.
[Ceramic-coated] [Silicone-coated], Low-e Coated, tinted, insulating
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Overall Unit Thickness: [1 inch (25 mm)] <Insert dimension>.
Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert
thickness designation>.
Outdoor Lite: Tinted [float glass] [heat-strengthened float glass] [fully tempered float
glass].
Interspace Content: [Air] [Argon].
Retain either heat-strengthened or fully tempered float glass option in first subparagraph below for
ceramic-coated, tinted, insulating spandrel glass.
6.
Indoor Lite: Clear [float glass] [heat-strengthened float glass] [fully tempered float
glass].
7.
Low-E Coating: [Pyrolytic on second] [Pyrolytic on third] [Sputtered on second]
[Sputtered on third] [Pyrolytic or sputtered on second or third] surface.
8.
Spandrel Coating Location: Fourth surface.
9.
Winter Nighttime U-Factor: <Insert value> maximum.
10. Summer Daytime U-Factor: <Insert value> maximum.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
L.
Glass Type [GL-<#>]: Reflective-coated, [Ceramic-coated] [Silicone-coated], low-e, clear
insulating spandrel glass.
GLAZING
088000 - 38
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
1.
2.
3.
4.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert
thickness designation>.
Outdoor Lite: Clear, [Float glass] [Heat-strengthened float glass] [Fully tempered
float glass].
Interspace Content: [Air] [Argon].
Retain either heat-strengthened or fully tempered float glass option in first subparagraph below for
ceramic-coated, low-e, insulating spandrel glass.
5.
Indoor Lite: [Float glass] [Heat-strengthened float glass] [Fully tempered float
glass].
6.
Reflective coating Location: [First] [Second] [Third] surface.
7.
Low-E Coating: [Pyrolytic on second] [Pyrolytic on third] [Pyrolytic on second or
third] surface.
8.
Opaque Coating Location: Fourth surface.
9.
Winter Nighttime U-Factor: <Insert value> maximum.
10. Summer Daytime U-Factor: <Insert value> maximum.
AGC Glass Company North America does not produce spandrel glass; however, AGC Glass Company
North America’s glazing products may be used in the fabrication of spandrel glass by an AGC Glass
Company North America approved fabricator.
M.
Glass Type [GL-<#>]: Reflective-coated, [Ceramic-coated] [Silicone-coated], low-e, tinted
insulating spandrel glass.
1.
2.
3.
4.
Basis-of-Design Product: AGC Glass Company North America; <Insert fabricator’s
name; product name or designation>.
Thickness of Each Glass Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert
thickness designation>.
Outdoor Lite: Tinted, [Float glass] [Heat-strengthened float glass] [Fully tempered
float glass].
Interspace Content: [Air] [Argon].
Retain either heat-strengthened or fully tempered float glass option in first subparagraph below for
ceramic-coated, low-e, insulating spandrel glass.
5.
Indoor Lite: [Float glass] [Heat-strengthened float glass] [Fully tempered float
glass].
6.
Reflective coating Location: [First] [Second] [Third] surface.
7.
Low-E Coating: [Pyrolytic on second] [Pyrolytic on third] [Pyrolytic on second or
third] surface.
8.
Opaque Coating Location: Fourth surface.
9.
Winter Nighttime U-Factor: <Insert value> maximum.
10. Summer Daytime U-Factor: <Insert value> maximum.
3.11
INSULATING-LAMINATED-GLASS SCHEDULE
Glass types in this article are primarily for sloped glazing and glazing that is required to be windbornedebris-impact resistant.
GLAZING
088000 - 39
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Copy paragraphs below and re-edit for each type of glass required.
Insert drawing designation. Use these designations on Drawings to identify each glass type.
If thickness designations are indicated on Drawings or are determined solely by compliance with
"Performance Requirements" Article, delete "Minimum Thickness of Outdoor Lite" and "Minimum
Thickness of Each Glass Ply" subparagraphs.
A.
Glass Type [GL-<#>]: Clear insulating laminated glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Overall Unit Thickness: [1-5/16 inch (33 mm)] [1 inch (25 mm)] [3/4 inch (19 mm)]
<Insert dimension>.
Minimum Thickness of Outdoor Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: [Heat-strengthened] [Fully tempered] float glass.
Interspace Content: [Air] [Argon].
Indoor Lite: Clear laminated glass with two plies of [annealed] [heat-strengthened]
[fully tempered] float glass.
a.
b.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12
mm] [As indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch
(2.29 mm)].
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
7.
8.
9.
Winter Nighttime U-Factor: <Insert value> maximum.
Summer Daytime U-Factor: <Insert value> maximum.
Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required.
10. Safety glazing required.
B.
Glass Type [GL-<#>]: Low-E-coated, clear insulating laminated glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
GLAZING
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Overall Unit Thickness: [1-5/16 inch (33 mm)] [1 inch (25 mm)] [3/4 inch (19 mm)]
<Insert dimension>.
Minimum Thickness of Outdoor Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
088000 - 40
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
4.
5.
6.
Outdoor Lite: Clear [Heat-strengthened] [Fully tempered] float glass.
Interspace Content: [Air] [Argon].
Indoor Lite: Clear laminated glass with two plies of [annealed] [heat-strengthened]
[fully tempered] float glass.
a.
b.
7.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12
mm] [As indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch
(2.29 mm)].
Low-E Coating: [Pyrolytic on second] [Pyrolytic on third] [Sputtered on second]
[Sputtered on third] surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
8.
Winter Nighttime U-Factor: <Insert value> maximum.
9.
Summer Daytime U-Factor: <Insert value> maximum.
10. Visible Light Transmittance: <Insert number> percent minimum.
11. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required.
12. Safety glazing required.
C.
Glass Type [GL-<#>]: Tinted, insulating laminated glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
7.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Overall Unit Thickness: [1-5/16 inch (33 mm)] [1 inch (25 mm)] [3/4 inch (19 mm)]
<Insert dimension>.
Minimum Thickness of Outdoor Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: Tinted [heat-strengthened] [fully tempered] float glass.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
Interspace Content: [Air] [Argon].
Indoor Lite: Clear laminated glass with two plies of [annealed] [heat-strengthened]
[fully tempered] float glass.
a.
b.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12
mm] [As indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch
(2.29 mm)].
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
8.
GLAZING
Winter Nighttime U-Factor: <Insert value> maximum.
088000 - 41
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
9.
10.
11.
Summer Daytime U-Factor: <Insert value> maximum.
Visible Light Transmittance: <Insert number> percent minimum.
Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required.
12. Safety glazing required.
D.
Glass Type [GL-<#>]: Low-E-coated, tinted, insulating laminated glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or a comparable
product from manufacturers listed in "Manufacturers" Article.
1.
2.
3.
4.
5.
6.
7.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
Overall Unit Thickness: [1-5/16 inch (33 mm)] [1 inch (25 mm)] [3/4 inch (19 mm)]
<Insert dimension>.
Minimum Thickness of Outdoor Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
Outdoor Lite: Low-E coated, tinted, [heat-strengthened] [fully tempered] float glass.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
Interspace Content: [Air] [Argon].
Indoor Lite: Clear laminated glass with two plies of [annealed] [heat-strengthened]
[fully tempered] float glass.
a.
b.
8.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12
mm] [As indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch
(2.29 mm)].
Low-E Coating: [Pyrolytic on second] [Sputtered on second] surface.
Insert performance properties, if required, in "Winter Nighttime U-Factor," "Summer Daytime U-Factor,"
"Visible Light Transmittance," and "Solar Heat Gain Coefficient" subparagraphs below to suit product(s).
9.
Winter Nighttime U-Factor: <Insert value> maximum.
10. Summer Daytime U-Factor: <Insert value> maximum.
11. Visible Light Transmittance: <Insert number> percent minimum.
12. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required.
13. Safety glazing required.
E.
Glass Type [GL-<#>]: Reflective-coated, insulating laminated glass.
Retain "Basis-of-Design Product" Subparagraph below to require a specific product or an approved equal
product from manufacturers listed in "Manufacturers" Article.
1.
Basis-of-Design Product: AGC Glass Company North America; <Insert product name
or designation>.
GLAZING
088000 - 42
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
Consider retaining option in "Kind" Subparagraph below if applicable; option is based on ASTM C 1376.
2.
Kind: Kind CV (coated vision glass)[, except that Kind CO (coated overhead glass)
may be used where the lower edge of the glass is more than 6 feet (1.8 m) above the
adjacent floor level or cannot be approached closer than 10 feet (3.0 m)].
Pyrolytic coatings may be used on the first, second, or third surface of insulating laminated glass.
Sputtered coatings is only used on the second or third surface of insulating laminated glass.
3.
Coating Type: [Pyrolytic] [Sputter-coating (vacuum deposition process)].
Retain one color from options in "Coating Color" Subparagraph below. Not all sputtered-coating colors
are suitable for monolithic applications and must be on second surface for monolithic applications.
4.
Coating Color: [Gold] [Pewter] [Silver] <Insert color>.
5.
Overall Unit Thickness: [1-5/16 inch (33 mm)] [1 inch (25 mm)] <Insert dimension>.
6.
Minimum Thickness of Outdoor Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm]
<Insert thickness designation>.
7.
Outdoor Lite: [Clear] [Tinted], [heat-strengthened] [fully tempered] float glass.
8.
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
9.
Interspace Content: [Air] [Argon].
10. Indoor Lite: Clear laminated glass with two plies of [annealed] [heat-strengthened]
[fully tempered] float glass.
a.
b.
11.
Minimum Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12
mm] [As indicated] <Insert thickness designation>.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch
(2.29 mm)].
Coating Location: [First] [Second] [Third] surface.
Insert performance properties, if required, in "Outdoor Visible Reflectance," "Winter Nighttime UFactor," "Summer Daytime U-Factor," "Visible Light Transmittance," and "Solar Heat Gain Coefficient"
subparagraphs below to suit product(s).
12. Outdoor Visible Reflectance: <Insert number> percent maximum.
13. Winter Nighttime U-Factor: <Insert value> maximum.
14. Summer Daytime U-Factor: <Insert value> maximum.
15. Visible Light Transmittance: <Insert number> percent minimum.
16. Solar Heat Gain Coefficient: <Insert value> maximum.
Retain "Low-Maintenance Coating" Subparagraph below only with sputter-coated clear float glass and
only after verifying availability.
17. Low-Maintenance Coating: Pyrolytic coating on first surface.
Retain subparagraph below if required.
18. Safety glazing required.
F.
Glass Type [GL-<#>]: Reflective-coated, low-E, insulating laminated glass.
1.
2.
Overall Unit Thickness: [1-5/16 inch (33 mm)] [1 inch (25 mm)] <Insert dimension>.
Thickness of Outdoor Lite: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] <Insert
thickness designation>.
GLAZING
088000 - 43
Copyright 2014 AIA
MasterSpec Premium
06/14
PRODUCT MASTERSPEC LICENSED BY ARCOM TO AGC GLASS COMPANY NORTH
AMERICA.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Outdoor Lite: [Clear] [Tinted] [heat-strengthened float glass] [fully tempered float
glass].
Tint Color: [Pure Grey] [Pure Bronze] [Pure Green] [Meadow Green] [Forest
Green] <Insert color>.
Interspace Content: [Air] [Argon].
Indoor Lite: Clear laminated glass with two plies of [float glass] [heat-strengthened
float glass] [fully tempered float glass].
a.
Thickness of Each Glass Ply: [3 mm] [5 mm] [6 mm] [10 mm] [12 mm] [As
indicated] <Insert thickness designation>.
b.
Interlayer Thickness: [0.030 inch (0.76 mm)] [0.060 inch (1.52 mm)] [0.090 inch
(2.29 mm)].
Low-e Coating Location: [Pyrolytic on second] [Pyrolytic on third] [Sputtered on
second] surface.
Reflective Coating Location: [Second] [Third] surface.
Winter Nighttime U-Factor: <Insert value> maximum.
Summer Daytime U-Factor: <Insert value> maximum.
Solar Heat Gain Coefficient: <Insert value> maximum.
Retain subparagraph below if required.
12. Provide safety glazing labeling.
END OF SECTION 088000
GLAZING
088000 - 44
Download