MUSWM Wireless Optical Mouse
MUSWM Wireless Optical
Mouse
USER MANUAL
USER MANUAL
GEMBIRD EUROPE B.V. http://www.gembird.eu
MUSWM Wireless Optical Mouse
USER MANUAL
Features:

Optical mini wireless radio-frequency mouse

Receiver can be hidden inside the mouse. Perfect for notebook
users

The most advanced optical technology 3 buttons mouse

Enhanced precision with optical sensor

Reliable radio technology ensures constant control of the cursor
regardless of any disturbances from other radio sources

Radio frequency 27MHz (1 channel), 256 ID

Operating distance at least 1.5 meter

Hardware resolution up to 800 dpi

Automatic sleep modes to save battery life, wake-up by mouse
button click
GEMBIRD EUROPE B.V. http://www.gembird.eu
MUSWM Wireless Optical Mouse
USER MANUAL
Specifications:
 Working frequency: 27 MHz
 Operation voltage: 2.1...3.3 VDC (2 PCS x AAA Batteries)
 800 DPI tracking resolution
 USB 2.0/1.1 compatible
 Working distance: 1.2 m
 Dimensions: 85.5 x 51.5 x 30 mm
System requirements
 Windows 98SE/ME/2000/XP/Vista
GEMBIRD EUROPE B.V. http://www.gembird.eu
MUSWM Wireless Optical Mouse
USER MANUAL
Installation instructions:
A. Insert batteries into the mouse:
1. Push the batteries cover compartment backwards to open it.
2. Insert two AAA batteries (enclosed) into the compartment taking care
of the battery polarity.
3. Slide the battery cover back to its place.
GEMBIRD EUROPE B.V. http://www.gembird.eu
MUSWM Wireless Optical Mouse
USER MANUAL
B. Link receiver with the mouse:
The digital IDs of the
mouse and receiver have
been preset in the factory to
allow
Plug
and
Play
installation. Just Plug the
Receiver into PC USB Port
and in a few seconds the
mouse is ready to work
(under Win2000 or higher the
operating system will install
the drivers automatically,
under Win98 installation of
driver is necessary).
If you wish to change the preset factory ID to link the mouse with the
receiver manually, follow the steps below:
1. Press the ID button at the top of the receiver. The receiver
LED will start blinking slowly.
2. Press the ID button at the bottom of the mouse.
3. After successful linking the blinking of the receiver LED
should become faster.
GEMBIRD EUROPE B.V. http://www.gembird.eu
MUSWM Wireless Optical Mouse
USER MANUAL
ID Button on the receiver
* Note: ID link should be completed within 10 seconds. Otherwise the
linking will fail.
C. Power Saving Mode:
1. Suspend Mode:
If you don’t move mouse for 10 minutes it will automatically go to the
battery-saving Suspend Mode. Click the mouse left button to wake it up
then.
2. Power Off Mode:
GEMBIRD EUROPE B.V. http://www.gembird.eu
MUSWM Wireless Optical Mouse
USER MANUAL
If you intend to stop using the mouse for a long time, it makes sense to
set the mouse into Power Off Mode to prolong the battery life. To do that
push and hold the mouse ID button for 3 seconds. The Optical LED will
first flash and then will be switched off. Press the mouse ID switch again
to wake it up.
Troubleshooting:
1. If the mouse doesn’t respond, please, check the battery power
status, and then link it with the receiver again.
2. If the optical LED is off, check whether you inserted the battery with
correct polarity.
GEMBIRD EUROPE B.V. http://www.gembird.eu