Details:
Address:
Tel:
Date of Birth: 15th March 1979
Nationality: Pakistani
Father’s Name: Maqbool Ahmed
Marital status: Married
Passport No.: BF5576021
Flate # A-5,
Alliance Paradise, Phase-II
(LS-12), Sector 11-C/1,
North Karachi,
Karachi, Pakistan.
(+92)-333-2210576
E-mail:
sajidsb@hotmail.com
MUHAMMAD SAJID
PERSONAL PROFILE

Having more than 15 years successful responsible professional experience in the field
of Inspection NDT, Quality Assurance and Development.
CERTIFICATION & TRAINING
Advance NDT Technique Certifications & Trainings
 “Ultrasonic Testing (UT) Level-II in TOFD Technique” according to ASNT-SNT-TC1A through ASNT Level-III from Peoples Steel Mills Limited, Karachi. In August’ 2012.
 “Training on Phased Array (PA) & Time of flight Diffraction (TOFD)” (02 weeks)
from Olympus Singapore PTE Ltd (SINGAPORE). In January- February 2012.
 “Course on Phased Array (PA) & Time of flight Diffraction (TOFD)” (1 week) from
National Center for NDT, Islamabad. In Dec’2011.
Conventional NDT Level-II Certifications
 “Ultrasonic Testing (UT) Level-II” according to ASNT-SNT-TC-1A through ASNT
Level-III from Peoples Steel Mills Limited, Karachi. In July’ 2009 (Re-certification on
March’2012)
 “Radiographic Testing (RT) Level-II” according to ASNT-SNT-TC-1A through ASNT
Level-III from Entourage International, Islamabad. In June’ 2010
 “Magnetic Particle Testing (MT) Level-II” according to ASNT-SNT-TC-1A through
ASNT Level-III from Entourage International, Islamabad. In June’ 2010
 “Dye Penetrant Testing (PT) Level-II” according to ASNT-SNT-TC-1A through ASNT
Level-III from Entourage International, Islamabad. In Jan’ 2011.
NDT Level-I Certifications
"Radiographic Testing Level-I " with 3rd position (92% marks) from "National Center for
NDT (NCNDT)", Islamabad. In Dec’ 2008.
Other NDT Trainings
Ultrasonic Flaw Sizing Of Defects (3 weeks) from National Center for NDT Islamabad. In
2001
Visits
 Visit Singapore
(Olympus Singapore PTE LTD.) For Training of Advance Ultrasonic
Testing Equipment (TOFD & PAUT) (Model #OMNI MX). (22 days) Jan-Feb’2011.

Visit China (DAN DONG
HUA RI ELECTRIC CO LTD.) For Inspection and Training of
Radiographic Testing machine (Model # XXG-3005). (06 days) May-2009.
Other Training & Skills
 Well use of MS Office, Well use of Internet
 Well use of ERP

Awareness training of “ISO 9001:2000” from Peoples Steel Mills Limited, Karachi.

Training as “Internal Auditor of ISO 9001:2000” from Peoples Steel Mills Limited, Karachi.
PROJECTS
Project: Fabrication & Installation of Fire Tube Heater (Furnace) EPRF-II REFINERY
Client:
ENAR Petroleum Refining Facility-II, Enar Petrotech Services.
Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT),
Magnetic Particle Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements
Project:
Fabrication of columns & pressure vessels EPRF-II REFINERY
Client:
ENAR Petroleum Refining Facility-II, Enar Petrotech Services.
Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT), Magnetic
Particle Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements
Project:
Fabrication & Installation of Electric Arc Furnace & Ladle, under
Ground diesel & kerosene storage tanks
Client:
PSM in-house project
Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT), Magnetic
Particle Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements.
Project:
Construction of Petroleum products storage tanks EPRFII REFINERY
Client:
Enar Employees Trust/Enar Petrotech Services
Job description: Performed Ultrasonic Test (UT) & Radiographic Testing (RT),
Project:
Fabrication of penstock with accessories
Client:
Hydrotech power/WAPDA Hydro Power
Job description:
Performed Radiographic Testing (RT),
Project:
Maintenance of Stablizer drill bit
Client:
Weather ford Pakistan
Job description:
Performed Ultrasonic testing (UT).
Project:
Life assessment of LGO Hydrotreator Reactors, Naphtha Hydrotreator
and Plate forming Reactors
Client:
Job description:
Byco Oil Pakistan Limited
Performed Ultrasonic testing (UT).WFMPI, DPT
Project:
TURNAROUND ACTIVITIES 2011
Client:
ENI Pakistan (Bhit Gas Field)
Job description:
Performed Ultrasonic testing (UT).WFMPI, DPT
Project:
Construction of Storage Tank
Client:
ENI Pakistan (Bhit Gas Field)
Job description:
Performed Ultrasonic testing (UT) of base plates
Project:
Construction of Loop lines
Client:
Job description:
ENI Pakistan (Bhit Gas Field)
Project:
Client:
Job description:
Project:
Client:
Job description:
Project:
Client:
Job description:
Performed Ultrasonic testing (UT) of loop lines
Installation of Compressor at Qadir Pur gas plant
Oil & Gas Development Corporation (OGDCL)
Performed Radiographic Testing (RT),
Steel Plant Fabrication
Aaisa Steel
Performed Radiographic Testing (RT), Ultrasonic testing (UT)
Maintenance of Hrbour Mobile Crane
Karachi Port Trust (KPT)
Performed Ultrasonic Testing
EMPLOYMENT HISTORY
Current position
TOTAL EXPERIENCE 15 YEARS
/ Feb. 2000 to onward
Working as Assistant Manger
Assurance and Development.
(Incharge NDT Section) PSM in Quality
CURRENT RESPONSIBILITIES AND SKILLS
Incharge NDT section









Communicate NDT results to other sections & customers/ Clients
Manage & monitor Project activities at client sites.
Correspondence with suppliers & customers
Arrange NDT consumables and Accessories
Establish Procedures and work guide lines
Make technical / commercial documents for bids
Coordinate with regularities bodies PNRA (Pakistan Nuclear Regulatory
Authority)
Manage manpower according to work load
Maintain the documentation of the section as per ISO-9001: 2008 requirements
Radiographic Testing (RT)





Perform and monitor Radiographic Testing (RT) on Pressure Vessels, columns,
welded Plates & Pipe lines.
Well use of x-ray machines and gamma ray Source (Ir-192).
Working on directional and panoramic x-ray machines. (300Kv &160Kv)
Well know how about Radiographic Technique & development of films.
Well Know how of different International Standards for Radiographic Testing
such as ASME Boiler & Pressure Vessel Code, API, ASTM Standards.
Ultrasonic Testing (UT)






Perform and monitor ultrasonic Testing (UT) on Pressure Vessels, columns,
welded Plates, Pipes, Rolled, Forged, and Cast Products.
Well use of ultrasonic flow detector model No USM25S & USM 35 x (GEGermany), TUD 201 (Time Corporation-China) .Epoch LT (Olympus-USA).
Use of Advance ultrasonic testing equipments for Time of Flight Diffraction
(TOFD) and Phased Array (PA) (omni MX- TOFD Equipment)
Measurements of thickness through thickness gauge TI-CMXDL (CHECK-LINE,
USA). DMS 4 (Make GE-Germany) & T-Gage IV (Sonatest, England)
Well use of ultrasonic editing softwares (Ultra doc)
Well Know how of different International Standards for UT (ASME Pressure
Vessel Code, ASTM & API Standards).
Magnetic Particle Testing (MT)




Perform and monitor Magnetic Practical Testing (MT) on Rolled, Forged Cast
product, Pipe Line and Welds.
Well Use of bench type MPT machines Model No. BCD-3000.
Well use of AC yoke, DC yoke, permanent Magnate.
Well know how of different International Standards for MT such as ASTM. ASME
Dye Penetrant Testing (PT)



Perform and monitor Dye Penetrant Testing (PT) on Castings, Pipe lines, welding
and Forged, Rolled and Machined product.
Perform both type (Visible and Florescent) Dye Panetrant.
Well know how of different International Standards for PT.
Positive Material Identification (PMI)
 Perform MPI through portable XRF analyzer (Alpha series-Innov-x system).
Previous position
/ March. 1998 to Feb 2000
Transmission Engineering Industries Limited. Hub Blochistan
Worked as a Quality Control Supervisor.
Responsibilities are:
 Performed online inspection.
 Performed final inspection.
 Development and design the route of new product.
 Performed calibration of measuring instruments
EDUCATION
 Bachelor of Technology (B-Tech) in Mechanical Engineering with
3.27 CGPA from Dada Bhoy Institute of Higher Education, Karachi,
Pakistan in 2004.
 D.A.E. with 2nd Division from Pak Swiss Training Center, Karachi in
1997.
 S.S.C. with 1st Division from Govt. High School Sanghar in 1994.
SAFETY AWARENESS
PTW (Permit to Work) Authorization, Safety standards, Standard safety signs,
Assessment of hazards and risks, Emergency procedures, Types of fire
Covering Letter
To,
The Human Resource Manager
Subject : CV FOR INSPECTION ENGINEER
R/Sir,
I am pursuing for the subjected in your esteem organization. I have worked following
projects in Pakistan
PROJECTS
Project:
Client:
Project:
Fabrication & Installation of Fire Tube Heater (Furnace) EPRF-II REFINERY
ENAR Petroleum Refining Facility-II, Enar Petrotech Services.
Fabrication & Installation of Electric Arc Furnace & Ladle, under
Ground diesel & kerosene storage tanks
Client:
Project:
Client:
Project:
Client:
Project:
Client:
Project:
PSM in-house project
Construction of Petroleum products storage tanks EPRFII REFINERY
Enar Employees Trust/Enar Petrotech Services
Fabrication of penstock with accessories
Hydrotech power/WAPDA Hydro Power
Maintenance of Stablizer drill bit
Weather ford Pakistan
Life assessment of LGO Hydrotreator Reactors, Naphtha Hydrotreator
and Plate forming Reactors
Client:
Project:
Client:
Project:
Client:
Byco Oil Pakistan Limited
TURNAROUND ACTIVITIES 2011
ENI Pakistan (Bhit Gas Field)
Construction of Storage Tank
ENI Pakistan (Bhit Gas Field)
Project:
Construction of Loop lines
Client:
ENI Pakistan (Bhit Gas Field)
Project:
Client:
Project:
Client:
Project:
Client:
Installation of Compressor at Qadir Pur gas plant
Oil & Gas Development Corporation (OGDCL)
Steel Plant Fabrication
Aaisa Steel
Maintenance of Hrbour Mobile Crane
Karachi Port Trust (KPT)
My skills are:
Planning & scheduling of work, Organizing & Coordination for jobs, Job supervision
skills, working with others, communicating adequately, Analysis & conclusions.
I am confident that you will find my strengths, abilities and experience of use to your
firm.
Your’s sincerely
MUHAMMAD SAJID