Material Safety Data Sheet
MSDS M2500 Plus
Issue Date: 18 April 2007
Issue No: 1
1. Product and Company Identification
Product Name:
Microgard 2500 Plus
Product Description: Coverall with welded seams manufactured using a microporous
polypropylene non woven composite, anti-stat treated on the
surface
Manufacturer:
Microgard Xiamen Ltd
32 East Huoju Road
Huli
Fujian Province
Xiamen
China 361006
Tel: 00 86 592 5766701
2. Component Information
Fabric Predominant component
- Chemical Name:
- CAS No:
1-propene homopolymer (polypropylene)
9003-07-0
Fabric Minor components:
- Melt additives:
Standard polypropylene additives (e.g. standard process
stabilisers, inorganic pigment colorants and fillers).
Fabric Antistatic treatment on fabric surface:
- Antistatic agent:
Proprietary antistatic agent containing neutralised
phosphoric acid ester
Antistatic treatment forms <2% of total material by weight.
Elastication:
- Waist Hood, Wrist & Ankles; 5mm elastic tension tape
Zipper:
- Nylon
Page 1 of 5
Material Safety Data Sheet
3. Hazard Identification
General
- Not classed as hazardous. Melted fabric adheres to skin and causes burns. Static charge
may build up in low humidity conditions.
Health Effects
Inhalation.
- Low dust product under usual conditions of use. Dust or fine fibres may be created by
cutting or mechanical abrasion of the fabric. No systemic toxicity if inhaled, but may cause
irritation to nose or throat.
Ingestion
- Unlikely. No systemic toxicity if ingested. No significant symptoms expected.
Skin.
- No irritation, swelling or sensitisation expected under normal conditions of use.
- No presence of Azo Dyes according to Directive 2002/61/EC, 82-02-2
Eyes.
- Exposure to dust (see “Inhalation”) could cause mechanical irritation like any foreign object.
4. First Aid Measures
Inhalation
- Inhalation problems with this product unlikely. No specific treatment, but if dust is inhaled
remove from source and seek medical attention if necessary
Ingestion
- Ingestion unlikely. If ingested and irritation or discomfort occurs seek medical attention.
Skin
- No hazard from product under normal conditions.
- If molten product is in contact with skin, cool rapidly with cold water. Do not pull solidified
product away from the skin. Seek immediate medical assistance.
- If any adverse skin reaction occurs following prolonged or repeated contact – cease use of
the garment, and if condition persists seek medical advice.
Eyes
- If foreign object causes irritation then flush eyes thoroughly with clean water, and seek
medical attention if required.
Page 2 of 5
Material Safety Data Sheet
5. Fire Fighting Measures
Fabric Melting Point:
Approximately 165ºc
Flashpoint:
343ºc
Flammability:
Flammable. Melts and tends to shrink away from flame.
Toxic vapours released when burnt.
Fabric passes EN13274-4 Method 3, for
resistance to ignition
Extinguishing media:
Consider other materials involved when selecting the
extinguishing media.
Fire Fighting Instructions: Wear self contained breathing apparatus
Decomposition products:
Predominantly Carbon Dioxide and Carbon Monoxide
6. Accidental Release Measures
Not applicable.
7. Handling and Storage
Handling
- This product is considered to be an article which does not release or otherwise result in
exposure to hazardous chemical under normal conditions of use.
Storage
- Microgard & Microchem products should be stored according to customary storage
practices. Store in a dry location and do not expose to temperature extremes. Avoid direct
contact from sunlight (or man made UV light) for prolonged periods. The projected shelf life of
Microgard & Microchem fabrics, if stored correctly, is 5 years.
8. Exposure Controls and Personal Protection
Engineering Controls
- Not applicable
Personal Protective Equipment (PPE)
- Not applicable
Page 3 of 5
Material Safety Data Sheet
9. Physical and Chemical Properties of Fabric
Physical State:
Solid non-woven material
Colour:
White
Odour:
Odourless
pH:
Melting Point:
Not applicable
>160ºc
Ignition Temperature: >400ºc
Solubility in water:
Main components in soluble. Anti-static treatment on fabric
surface is soluble
Density
0.89 – 0.91 at 20ºc
10. Stability and Reactivity of fabric
Stability
- Stable under normal handling and storage conditions
Materials to be avoided
- Strong oxidation agents
Dangerous Reactions
- None known
Dangerous decomposition products
- Non known at room temperature
11. Fabric Toxicological Information
Typical values for the base polymer from which the product is made:
LD 50, oral >2000mg/kg
LD 50, dermal >2000mg/kg
12. Fabric Ecological Information
Information about elimination (persistence and degradability)
- Not biologically decomposable
- Degrades under ultra-violet exposure
Mobility
- Insoluble in water. Floats on water. No bioaccumulation known.
General Notes
- The product is not regarded as toxic. Small particles can have physical effects on water and
soil organisms.
Page 4 of 5
Material Safety Data Sheet
13. Disposal Considerations
The polymer used in the construction of the fabric is classified by the European commission
of 20.12.1993 in its list of waste materials on the same level as municipal waste (Guideline
EWG 75/442, later modified by EWG 91/156)
The material can be re-used or re-cycled according to the regulations of Guideline EG 94/62.
Disposal of the material (including contaminated garments) should be through authorised,
controlled incineration or authorised waste dump.
14. Transport Information
This product is, according to national and international guidelines which regulate the road,
rail, air and sea transport, not dangerous
15. Regulatory Information
Fabric designation according to EC guidelines
- According to the text of the EEC directive 67/548 and following adaptations, the material is
not dangerous
Limitations of use
- Please refer to product insert or contact Microgard Ltd.
Product Classification
- Category III Personal Protective Equipment, according to EC PPE directive 89/686/EEC
- Product meets the requirements of EN340. Protective Clothing General requirements
- For more information please refer to product insert or contact Microgard Ltd.
16. Other Information
The information supplied is based upon the current level of information available for the
purpose of specifying the requirements regarding environment, health and safety in
conjunction with the product. They are not to be interpreted as a warranty for specific product
characteristics. Microgard Ltd takes no responsibility for the inappropriate use, process and
handling by purchasers and users of the product.
17. Contact
Mr Paul Bryce, Microgard Ltd, Malmo Road, Sutton Fields Ind. Estate, Hull, HU7 0YF, UK
Page 5 of 5