1: IDENTIFICATION OF PRODUCT
Product: Bio-Life PetalCleanse/C&D
Bulk Manufacturer’s Name: StarColour Labs.
Tel. No. 0044 1223 897997
Address: Unit 10, The Grip Industrial Estate
Linton, Cambridge CB21 4XN
Packaging: Bio-Life International Ltd
Emergency Phone: ++44 1608 686626
Date Revised: 8/8/07
Emergency EMAIL: sales@bio-life.co.uk
2. HAZARDS IDENTIFICATION
Human
Address: Unit1, Bio-Life Building, Sutton Lane,
Brailes, Oxon OX15 5BB, UK
Information Phone: ++44 1608 686626 or ++44 7974000858, ++44 7976121815
Avoid prolonged/repeated exposure to the skin & keep out of eyes.
May cause skin or eye irritation if exposure is prolonged.
Acute health hazards: None known
Chronic health hazards: None known
Safety
The product is non-flammable at temperatures of up to 50°C.
Ecological
Not completely bio-degradeable. Discharge of large quantities into the aquatic environment may kill fish and other aquatic organisms.
COMPOSITION INFORMATION ON INGREDIENTS
Product Composition and Raw Materials conforming to the monographs of The International Cosmetic
Ingredient Dictionary issued by the CTFA:
INCI NAME
Aqua
Quaternium-22
Glycerin
Quaternium-26
Panthenol
Aloe barbadensis
<2
<2
Hydroxypropyltrimonium hydrolysed collagen <2
Tilia cordata
Rosmarinus officinalis
Hydrolyzed collagen
<2
<2
<2
%
75-95
<1
1-5
<2
<2
<2
<2
CAS No. EINECS No.
7732-18-5 231-791-2
68953-64-0 273-222-0
56-81-5 200-289-5
51812-80-7 257-440-3
81-13-0 201-327-3
85507-09-3 287-390-8
N/A N/A
84929-52-2 284-536-2
84604-14-8 283-291-9
92113-31-0/ 295-635-5
9015-54-7
97-59-6
112-99-6
202-592-8
204-589-7
35691-65-7 252-681-0
Classification*
Allantoin
Phenoxyethanol*
Methyldibromo glutaronitrile*
* See section 16 for explanation
4:FIRST AID
Skin Exposure: In the event of exposure wash off with copious amounts of water. Remove contaminated clothing and launder before re-use.
Eye Contact: Rinse with copious amounts of water for at least 10 minutes. Seek medical advice.
Ingestion: If accidentally ingested, rinse out the mouth with water and drink copious amount of water.
Do not induce vomiting. Seek medical advice.

5: FIRE FIGHTING MEASURES
The product is essentially non-flammable at temperatures of up to 50 degrees centigrade (120 Deg F), the limit at which it has been tested..
Extinguishing Media in the event of exposure to extreme heat: Water, foam or powder.
6: ACCIDANTAL RELEASE MEASURES
SPILLAGE: Spills should be contained and mopped up into suitable containers for proper disposal.
WASTE DISPOSAL METHOD: Empty containers may be landfilled at a licensed facility.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Wash hands thoroughly after handling material. OTHER PRECAUTIONS: None
7: HANDLING & STORAGE
STABILITY: stable CONDITIONS TO AVOID: Direct flame. Do not store or handle at temperatures in excess of 45 Deg. C (120 Deg. F)
INCOMPATIBILITY (MATERIALS TO AVOID) :Flame and contact with strong oxidising agents.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS: None
HAZARDOUS POLYMERIZATION: Will not occur.
8: EXPOSURE CONTROL/PERSONAL PROTECTION
Skin exposure: Prolonged exposure to the skin can cause irritation.
Eye contact: Could cause eye irritation.
Ingestion: The product is low toxicity and unlikely to cause serious problems in the event of ingestion.
CARCINOGENICITY: No IARC MONOGRAPHS: No OSHA REGULATED: No
EMERGENCY AND FIRST AID PROCEDURES:
Skin Exposure: In the event of exposure wash off with copious amounts of water. Remove contaminated clothing and launder before re-use.
Eye Contact: Rinse with copious amounts of water for at least 10 minutes. Seek medical advice.
Ingestion: If accidentally ingested, rinse out the mouth with water and drink copious amount of water.
Do not induce vomiting. Seek medical advice.
9: PHYSICAL/CHEMICAL CHARACTERISTICS
The finished product’s specifications (tests and limits) are:
Appearance: Clear solution
Colour: Pale yellow
Odor: Virtually odourless pH : 4.6 to 5.2
Microbiological count: <10
Specific gravity: 1.002 to 1.009
10: STABILITY & REACTIVITY
STABILITY: stable CONDITIONS TO AVOID: Direct flame. Do not store or handle at temperatures in excess of 45 Deg. C (120 Deg. F)
INCOMPATIBILITY (MATERIALS TO AVOID) :Flame and contact with strong oxidising agents.
11. TOXICOLOGICAL INFORMATION
Skin exposure: May cause irritation with prolonged &/or repeated exposure
Eye contact: May cause eye irritation
Ingestion: The product is low toxicity and unlikely to cause serious problems in the event of ingestion.

12. ECOLOGICAL INFORMATION
Do not release into surface waters.
13. DISPOSAL CONSIDERATIONS
Empty containers may be landfilled at a licensed facility.
14. TRANSPORT INFORMATION
Exempt from hazardous materials regulations.
15. REGULATION INFORMATION
The product is not classified as dangerous under Dangerous Substances Directive 67/548/EEC or
Dangerous Preparations Directive 1999/45/EC. The product is not persistent, bioaccumulative & toxic
(PBT) or very persistent and very bioaccumulative (vPvB) as defined in Annex XIII of REACH or included in the European Chemicals Agency Candidate List of substances of very high concern. The
SDS Sheets are prepared in accordance with REACH (Registration, Evaluation, Authorisation and restriction of Chemicals) which became UK law on 1 June 2007 & encompassing CHIP Regulations
2002.
16. OTHER INFORMATION
Symbol Letters & Phrases used in Section 2.
Note: These may not apply to the preparation as supplied.
16.1 Risk Phrases: NONE
Safety Phrases in accordance with the safety assessment of the composition as a whole:
S2 – Keep out of reach of children
S7/47 – Keep container tightly closed & at temperatures not exceeding 50°C
S25 – Avoid direct contact with eyes
The opinions expressed herein are those of qualified experts within Smallburgh Laboratories and Bio-
Life International Ltd. We believe the information contained here is correct as of the date of this material safety data sheet. Since the use of the product is not within the control of Smallburgh
Laboratories or Bio-Life International Ltd, it is the users obligation to determine a safe end use of this product.