puba

advertisement
Publications of Gusztáv Szecső
I. Dissertation
1. Microcomputer Based Process Control (Digital Control System for an Inductance
Pipe Bender), University Doctorate Dissertation, University of Miskolc, 1986.
2. Some Results in the Area of Computer Aided Control System Design, University
of Kosice, 2001
II. Book
1. Automatics for Engineers, Educational Publisher, Budapest 1992. pp. 446-470,
Chapter 7.6. ISBN 963 18 4310 6
Co-authors:
László Bánhidi PhD.,
Miklós Oláh, dr. Univ., A./Prof.,
István Gyuricza, dr. Univ., assistant Prof.,
Mátyás Kiss, dr. Univ., assistant Prof.,
László Rátkai, dr. Univ., assistant Prof.
III. Textbooks
1. Controllers and Their Elements I., Educational Publisher, Budapest 1983. 164 p.
2. Controllers and Their Elements (Laboratory Courses), Educational Publisher,
Budapest 1983. 175 p.
3. Controllers and Their Elements II. , Educational Publisher, Budapest 1984. 183 p.
4. Laboratory Courses for Binary Control I., Educational Publisher, Budapest 1978.
363 p.
Co-author: István Ajtonyi dr. Univ., assistant Prof.
5. Computer Aided Design for Control Systems – Control Theory (in English),
University of Miskolc, 2001.
6. Computer Aided Design for Control Systems – System Identification, Modelling and
Simulation (in English), University of Miskolc, 2001.
1
7. Computer Aided Design for Control Systems – Applied Mathematics (in English),
University of Miskolc, 2001.
IV. Presentations in English
1. Control System of Underground Gas Storage, Proceedings of 6th International
Conference on Electronics and Automation, 10-12 April, 2001. Pp. 73-78. P. 165.
ISBN 963 00 64510
Co-author: László Tornyi
2. Control Strategies of Underground Gas Storage
INES’99 IEEE International Conference on Intelligent Engineering Systems, Nov. 1-3,
Poprad, High Tatras, Stará Lesná, Slovakia, Proceedings pp. 177-181, Section:
Intelligent Manifacturing Systems, ISSN 1562-5850, ISBN 80-88964-25-3, 1999.
3. Optimisation and Simulation of High Order System Controlled by State Controller
with Observer, Publications of the University of Miskolc, Series C, Mechanical
Engineering, Production Systems, Vol. 49. HU ISSN 0237-6016, pp. 163-171, 1999.
4. An Implemented Model Based Fault Diagnosis Expert System for a Pressure
Regulator
IMPACT WORKSHOP on MODEL BASED FAULT DIAGNOSIS ‘94, Zakopane,
1994. Pp. 139-146.
Co-authors:
István Gyuricza dr. Univ., assistant Prof.,
Miklós Oláh dr. Univ., associated Prof.
5. Teaching of Controlling Complex Technology – The Second Level is the
Identification and Process Control, IMPACT WORKSHOP on AE in ACT, Prague, 9
p., 1994.
6. Controlling Model of a Gas Transport Station
Workshop on Automation and Control Engineering in Higher Education Vienna,
1995. pp. 43-52.
7. Controlling Model of a Gas Transport Station
Automation’95 Conference with International Participation Budapest, Hungary 1995.
Proceedings pp. 309-318.
8. Controlling Model of a Gas Transport Station
th
260 Anniversary of the University of Miskolc, Jubilee Memorial Scientific
Conference, Section Produce Systems and Informatics (poster) 10 p.
2
9. Control Methods and Systems
Lecture Note in English, 44 p., Miskolc 1994.
10. Real Time Analysis of Grey Cast-iron with the ADAM 4000 System
microCAD’99 International Computer Science Conference Miskolc 1999.
Co-authors:
Jenő Dúl Ph.D., associated Prof.,
László Varga doctorand.
11. Complex Laboratory Technologies in Automation Control Education
EXACT’94 IMPACT WORKSHOP DRESDEN, 7 p., April 11-12, 1994.
Co-author: András Sulyok dr. Univ., assistant Prof.
12. Teaching of Controlling Complex Technology – the First Level is the Data
Acquisition and Signal Processing, Teaching Control Engineering and Process
Control for Engineers in Mining, Metallurgy, Mechanical Engineering, 9 p. IMPACT
TEMPUS WORKSHOP MISKOLC, 1994.
13. Industrial and Educational Applications of the ADAM 4000 Hardware and GENIE
Software System for Measuring Procedures, Tempus INTCOM’99 Symposium on
Intelligent Systems in Control and Measurement, Proceedings, pp. 128-136, 1999.
14. Optimisation and Simulation of High Order System Controlled by State Controller
th
with Observer, Proceedings of 5 International Symposium on Electronics and
Automation, pp. 163-169, Budapest 2000. ISBN 9630026708
15. Optimisation and Simulation of High Order System Controlled by State Controller
with Observer, Publications of the University of Miskolc, Series C, Mechanical
Engineering, Electrical Engineering and Control Systems, Vol. 50. p. 83. HU ISSN
1215-0851, pp. 51-57, 2000.
16. The Function of the Simulation in Control Structure Design of the Underground Gas
Storage System, Proceedings of 4th Workshop on European Scientific and Industrial
Collaboration, Vol. I. pp. 243-250. WESIC 2003 Advanced Technologies in
Manufacturing, May 28-30 2003, Miskolc-Lillafüred, ISBN 963 661 570 5
17. The Function of the Simulation in Control Structure Design of the Underground Gas
Storage System, Proceedings of 5th International Carpathian Control Conference, Vol.
I. pp. 521-526. Zakopane, Poland May 25-28, 2004, ISBN 83-89772-00-0
3
V. Papers in Printed Form (in Hungarian)
1. Industrial and Educational Measuring Applications of the ADAM 4000-type
Hardware and the GENIE Software Systems, HUNGELEKTRO’99 International
Electronics and Automation Exhibition and Symposium, Proceedings pp. 91-99,
Budapest 1999.
ISBN 963 03 7245 2
2. Measuring and Supervising Temperature of the Molten Metal in Connection with
the High Pressure Casting, Producer Implements, Tools, Machine Tools, Vol. VII.
2002/1, pp. 8-10, INFO-PROD Ltd., Budapest, ISSN 1587-6853, 1587-9267
Co-authors:
Richard Szabó Msc.
Jenő Dúl Ph.D. A./Prof.
3. A CACSD System and Its Application, Measurement and Automation, 39. Vol.
No. 3. pp.184-190, 1991.
4. An Expert Software System for Examining BKG-type Pressure Regulator
microCAD’94 International Computer Science Conference Miskolc 1994.
Co-authors:
Miklós Oláh dr. Univ., associated Prof.
István Gyuricza dr. Univ. assistant Prof.
5. An Expert System for Gas Pressure Regulator, XXXth Industrial Electronic
Measurement and Control Symposium Balatonszéplak, pp. 81-92, 1994.
Co-authors:
Miklós Oláh dr. Univ., associated Prof.
István Gyuricza dr. Univ., assistant Prof.
6. Automatically Calibrating System for Gas Meters
MicroCAD – SYSTEM’93 International Computer Science Conference Miskolc,
Section(E) Measurement and Automation, pp. 33-42. 1993.
Co-author: Béla Bátyi assistant under-secretary of Gas Works of Budapest.
7. Controlling Model of a Gas Transport Station
microCAD’95 International Science Conference Miskolc, pp. 53-56 in Section D
(Measurement and Automation) 1995.
8. Automatically Calibrating System for Resident Gas Meters
Automation’95 Conference with International Participation Budapest,
Proceedings pp. 491-499, 1995.
4
9. Diagnostics of the RMG 502-type Pressure Regulator
th
260 Anniversary of the University of Miskolc, Jubilee Memorial Scientific
Conference, Section Produce Systems and Informatics
Co-authors:
János Bán doctorand,
István Gyuricza dr. Univ., assistant Prof.
10. An Expert System for the RMG-502 Type Gas Pressure Regulator,
MICROCAD’96, International Science Conference Miskolc, pp. 23-28 in Section
D (Measurement and Automation), 1996.
Co-author: István Gyuricza dr. Univ., assistant Prof.
11. Process Control Using Personal Computer I.
Lecture Note, Miskolc, 1995. 27 p.
12. Process Control Using Personal Computer II.
Lecture Note, Miskolc, 1995. 41 p.
13. Process Control Using Personal Computer III.
Lecture Note, Miskolc, 1996. 27 p.
14. Flow Measurement Using ADAM 4000-type System
Lecture Note, Miskolc, 1997. 36 p.
15. The MICROSOFT OFFICE for WINDOWS
Lecture Note, Miskolc, 1998. 81 p.
16. State Controllers with Observers
Lecture Note, Miskolc, 1998. 20 p.
17. Industrial Process Instrumentation
Lecture Note, Miskolc, 1995. 31 p.
18. Microprocessors
Lecture Note, Miskolc, 1992. 35 p.
19. Microprocessor Based Process Control
Text Book for Postgraduate Students, Kazincbarcika, 1986. 728 p.
20. Computer Aided Control System Design
Technical Life of Borsod Province No. 2. Pp. 22-25, 1990.
5
21. Productional Systems and Informatics
th
260 Anniversary of the University of Miskolc, Jubilee Memorial Scientific
Conference, Section Produce Systems and Informatics
Co-authors:
Mátyás Kiss dr. Univ., assistant Prof.,
István Gyuricza dr. Univ., assistant Prof.
22. Digital Control
Lecture Note, Miskolc, 1992-1999. 75 p.
23. Nonlinear Control
Lecture Note, Miskolc, 1992-1999. 89 p.
24. Intelligent Flow Sensor for Higher Education
Conference of Energetics and Electrical Engineering, ENELKO 2003, ClujNapoca, ISBN 973-86097-5-5, pp. 223-227.
25. Intelligens áramlásszenzor oktatási célra
microCAD 2004 International Scientific Conference 18-19 March 2004, G
szekció: Automatizálás és telekommunikáció, pp. 111-115, ISBN 963 661 608 6 ö,
ISBN 963 661 615 9
VI. Final Reports of Research Projects
1. Applications of Microprocessors in Oil and Gas Industry (complex research
project 1985-1989.)
Number of the project: Sz-Kb-9/1985-It.
Customer: Hungarian Oil and Gas Company
Subcategorises of the complex research project:
a/ Supervisor and Control System for Beam Wells
(first version for an oil field in Eger) 1988.
Co-researcher: István Ajtonyi dr. Univ., associated Prof.
b/ Microcomputer Based Control System for a Gas Mixing Circuit (Szank, 1987.)
c/ Supervisor and Control System for Beam Wells
(second version for an oil field in Zalaegerszeg) 1989.
Co-researcher: István Ajtonyi dr. Univ., associated Prof.
2. Examining Explosion Yield and Destroyer Effect of Natural Gas Explosion, research
project in 1991. (Number of the project: EK 06010392)
Customer: South Transdanubian Gas Service Company
6
3. Diagnostic Examination of BKG-type Gas Pressure Regulator, research project in
1991. (Number of the project: CONTENT-1991.)
Customer: Hungarian Gas and Oil Supplier Company
Co-researchers:
István Gyuricza dr. Univ., assistant Prof.
Miklós Oláh dr. Univ., associated Prof.
4. Examining Cloud Explosion in Block of Flats, research project in 1992. (Number of
the project: EK 0000092)
Customer: South Transdanubian Gas Service Company
5. Developing Mobile PC Based Measurement System for Calibrating Gas Meters,
research project in 1992. (Number of the project: EK 0001222)
Customer: Gas Works of Budapest
6. Developing Diagnostic System and Equipment for BKG-type Gas Pressure Regulator
Using by Gas Transport Stations, research project in 1993. (Number of the project:
KF-0277)
Customer: Gas and Oil Supplier Company of the Hungarian Gas and Oil Company
Co- researchers:
István Gyuricza dr. Univ., assistant Prof.
Miklós Oláh dr. Univ., associated Prof.
7. Approbation of Intelligent Control Devices in the Frame of Departmental Program for
Developing and Research Control Elements and Systems, research project in 1985.
(Number of the project: Szm-Kb-1b/1985-It)
Customer: Hungarian Country-wide Projecting Developmental Committee (Number
of the project at the customer: 6-0656)
8. Developing and Implementing Digital Interface System for Microcomputer Based
Process Control Device, research project in 1982.
Customer: The Northern Hungarian Chemical Company
9. Developing and Implementing a Supplemental Digital Control System for an
Inductance Pipe Bender in a Adjusting Factory, research project in 1984.
Customer: Hungarian Chemical Factory Building and Adjusting Company
10. Implementing a Research and Educational Sample System Founded on a
Computer Based Designing and Simulation CACSD Software
a. Digital Control Using CACSD, a part of the final report in 1996, 60 p.
b. Controlling Model of a Gas Transport Station, a part of the final report, 10 p.
The leader of the project: Prof. Tibor Tóth D.Sc.
Customer: Ministry of Education
11. Elaborating and Verifying Using by Simulation the Control Strategies of Underground
Gas Storage, research project in 1999, 30 p.
7
Customer: SCADA Ltd.
VII. Presentations in Oral Form
1. Control System of Underground Gas Storage, Simulation and Real Time
Implementation AARTC'2000 IFAC Workshop in Spain, assigned number aartc-0009.
Co-author: László Tornyi manager of SCADA Ltd.
2. An Expert System for the BKG Type Gas Pressure Regulator, Hungarian Gas and Oil
Transport Co., Miskolc 1994.
Co-author: István Gyuricza dr. Univ., assistant Prof.
3. Approbation of Intelligent Control Devices, Hungarian Measurement and Automation
Organisation, High School Faculty of Chemical Automatization, Kazincbarcika 1986.
4. University Course on the CP/M Operation System, Institute of Mathematics of
University of Miskolc, 1983.
5. Real Time Quality Analysis of Cast Iron Based on Thermal Cooling Curve Applying
th
the ADAM 4000 System, 15 Hungarian Casting Days and XIIth Metal Casting Days,
Székesfehérvár, 1999.
Co-authors: Jenő Dúl Ph.D., associated Prof.
6. Metallurgical Quality Analysis of Cast Iron Based on Thermal Cooling Curve 50th
Anniversary of the Faculty of Metallurgy, Jubilee Memorial Scientific Conference,
Miskolc, 1999.
Co-authors: Jenő Dúl Ph.D., associated Prof.
7. Optimisation and Simulation of High Order System Controlled by State Controller
with Observer, microCAD'2000, International Computer Science Conference, Section
E(Measurement and Automation), Miskolc, 2000.
8. Supervising High Temperature Machines with ADAM 4000 Measuring System,
microCAD'2000, International Computer Science Conference, Section C(High
Temperature Devices), Miskolc, 2000.
Co-author: Jenő Dúl Ph.D., associated Prof.
9. Control Strategies of Underground Gas Storage, microCAD'2000, International
Computer Science Conference, Section F (Measurement and Automation), Miskolc,
2001.
8
Download