Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: + 1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
December 2008
Product Guide Specification
Specifier Notes: This product guide specification is written according to the Construction
Specifications Institute (CSI) 3-Part Format, based on MasterFormat 2004 and The Project
Resource Manual—CSI Manual of Practice. The Manufacturer is responsible for technical
accuracy.
The section must be carefully reviewed and edited by the Architect or Engineer to meet the
requirements of the project and local building code. Words and sentences within brackets [ ] are
choices to include or exclude a particular item or statement. Coordinate this section with other
specification sections and the Drawings. Delete all “Specifier Notes” after editing this section.
SECTION 28 23 29
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
BOSCH FLEXIDOMEXF VDC-485V SERIES CAMERAS
PART 1 – GENERAL
1.1
SUMMARY
A.
Section Includes
1. Video Surveillance Remote Devices.
B.
Related Sections
1. Section [28 23 13 – Video Surveillance Control and Management Systems]
2. Section [28 23 16 – Video Surveillance Monitoring and Supervisory Interfaces]
3. Section [28 23 19 – Digital Video Recorders and Analog Recording Devices]
4. Section [28 23 23 – Video Surveillance Systems Infrastructure]
**********Specifier’s note: Include those standards referenced elsewhere in this SECTION.
Project Name/Project #/2-15-16
28 23 29 - 1
Video Surveillance Remote
Devices and Sensors
1.2
REFERENCES
A.
European Norm
1. EN50022 class B – (CE) Information Technology Equipment – Radio
Disturbance Characteristics – Limits and Methods of Measurement for
Emission.
2. EN60950-1 (CE) – Information Technology equipment - Safety.
3. EN50130-4 (CE) – Alarm Systems – Electromagnetic Compatibility – Product
Family Standard: Immunity Requirements for Components of Fire, Intruder and
Social Alarm Systems.
B.
Canadian Standards Association (CSA)
1. CSA 22.2 No. 950
C. Federal Communications Commission (FCC) (www.fcc.gov)
1. FCC CFR 47 part 15 class B – Telecommunication- Radio Frequency DevicesDigital Device- Emission.
D. Institute of Electrical and Electronics Engineers, Inc. (IEEE) (www.ieee.org)
1. IEEE 802.3af compliance. Power over Ethernet.
E.
International Organization for Standardization (ISO)
1. 9001 – Quality System.
F.
Water/Dust Protection
1. IP 66
2. NEMA-4X
G. Underwriters Laboratories, Inc. (UL) (www.ul.com)
1. UL 1950.
1.3
DEFINITIONS
1.4
SYSTEM DESCRIPTION
A.
Video Surveillance Remote Devices
1. FlexiDome XT+ VDC-445V Series Color NightSense or Day/Night Cameras.
B.
Performance Requirements
1. Color dome camera designed using a 1/3-inch format CCD imager.
2. Produces 540 TVL of horizontal resolution.
3. Allows 90 degree vertical view.
4. Provides Bilinx bi-directional communication.
5. Ultra-compact size camera.
Project Name/Project #/2-15-16
28 23 29 - 2
Video Surveillance Remote
Devices and Sensors
1.5
SUBMITTALS
A.
Submit under provisions of Section [01 33 00].
B.
Product Data:
1. Manufacturer’s data, user and installation manuals for all equipment and
software programs including computer equipment and other equipment required
for complete video management system.
C. Shop Drawings; include
1. System device locations on architectural floor plans.
2. Full Schematic of system, including wiring information for all devices.
D. Closeout Submittals
1. User manual.
2. Focus aid.
3. Installation guide.
4. CD-ROM with manual, software and tools.
5. System device locations on architectural floor plans.
6. Maintenance requirements.
1.6
1.7
QUALITY ASSURANCE
A.
Manufacturer:
1. Minimum of [10] years experience in manufacture and design Video
Surveillance Devices.
2. Manufacturer’s quality system: Registered to ISO 9001 Quality Standard.
B.
Video Surveillance System
1. Listed by [UL] [EN] [FCC] specifically for the required loads. Provide evidence
of compliance upon request.
C. Installer:
1. Minimum of [5] years experience installing Video Surveillance Systems and
Devices.
DELIVERY, STORAGE AND HANDLING
A.
Comply with requirements of Section [01 60 00].
B.
Deliver materials in manufacture’s original, unopened, undamaged containers; and
unharmed original identification labels.
C. Protect store materials from environmental and temperature conditions following
manufacturer’s instructions.
D. Handle and operate products and systems according to manufacturer’s instructions.
E.
Bosch provides off-the-shelf availability for our top selling products and same-day or
24-hour shipping.
Project Name/Project #/2-15-16
28 23 29 - 3
Video Surveillance Remote
Devices and Sensors
1.8
WARRANTY
A.
1.9
Provide manufacturer’s warranty covering [3] year for CCTV products for
replacement and repair of defective equipment.
MAINTENANCE
A.
Make ordering of new equipment for expansions, replacements, and spare parts
available to dealers and end users.
B.
Provide factory direct technical support from 8:00 a.m. to 8:00 p.m. via phone and email.
PART 2 – PRODUCTS
2.1
MANUFACTURERS
A.
Acceptable Manufacturer:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 1450, USA
Phone: + 1 800 289 0096
Fax: + 1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
B.
Substitutions: [Not permitted.] [Under provisions of Division 1.]
1. [All proposed substitutions must be approved by the Architect or Engineer
professional.]
2. [Proposed substitutions must provide a line-by-line compliance documentation.]
**********Specifier’s note: Select Camera System Series based on project requirement.
2.2
BOSCH FLEXIDOME XF CAMERA SERIES VDC-485V
A.
The product specified shall be a vandal/tamper resistant, 540 TVL resolution color
dome camera designed for indoor/outdoor applications using a 1/3-inch format CCD
imager. The unit is prepackaged in a cast aluminum housing with a heater, a clear
polycarbonate dome bubble, and a hardened inner liner. The dome bubble is
supplied with a UV blocking anti-scratch coating. The unit is capable of withstanding
the equivalent of 120 lbs (55 kg) of force. The camera is protected against water
and dust to NEMA-4X (IP66) standards. The dome camera comes complete with
one of the following automatic iris, integral, varifocal lenses, as required by the
application, to allow manual zoom and focus adjustment:
1. 3.0 to 9.5 mm, F1.0-360, varifocal lens.
2. 3.7 to 12.0 mm, F1.6-360 varifocal lens.
3. 9.0 to 22.0 mm, F1.4-360, varifocal lens.
Project Name/Project #/2-15-16
28 23 29 - 4
Video Surveillance Remote
Devices and Sensors
B.
The product specified shall be a high performance color dome camera designed to
be vandal/tamper resistant and capable of withstanding the equivalent of 120 lbs (55
kg) of force. The unit shall be prepackaged in a cast aluminum housing with a
heater, polycarbonate dome bubble, hardened inner liner, and an aluminum trim
ring. The dome bubble shall be a clear, polycarbonate material with a UV blocking
anti-scratch coating.
C. The dome camera specified shall protect the camera against water and dust to
Nema-4X (IP66) standards
D. The dome camera shall contain a heater that allows the dome camera to operate at
temperatures between -50°C to +50°C (-58°F to +122°F).
E.
The dome camera shall be designed for indoor/outdoor applications using a 1/3-inch
format CCD imager providing 540 TVL of horizontal resolution.
F.
The dome camera specified shall incorporate [Bosch] 15-bit digital signal processing
and XF-dynamic to provide a 32X extended dynamic range to maximize picture
performance and sensitivity under all lighting conditions. The camera shall produce
color video pictures during normal lighting conditions, but will automatically switch to
a monochrome mode (Bosch NightSense feature) to produce quality black and
white video images when lighting falls below levels required to adequately produce
color images.
G. The dome camera specified shall be equipped with a coaxial communications
transceiver that incorporates a technology [Bosch Bilinx] to allow the camera to be
setup and the firmware to be updated remotely via the coaxial cable using bidirectional communication. The manufacturer shall offer optional configuration
software [Bosch VP-CFGSFT] that operates in conjunction with the bi-directional
communication technology for adjustment of the camera from the head-end side of
the coaxial cable.
H. The specified color dome camera shall have Auto black circuitry to ensure maximum
contrast under low contrast scene conditions. This function shall be on/off
selectable.
I.
The camera shall provide a 16-character programmable camera ID. The position of
the camera ID on the camera’s video shall be selectable.
J.
The camera shall provide a built-in, four (4) area video motion detector with
selectable sensitivity.
K.
The manufacturer of the dome camera shall offer models for use in NTSC (60 Hz) or
PAL (50 Hz) CCTV color systems. The cameras shall operate within the voltage
range of 10.8 to 39 VDC or 12 to 28 VAC, 45-65Hz and require no more than 6
watts of power when the heater is operational.
Project Name/Project #/2-15-16
28 23 29 - 5
Video Surveillance Remote
Devices and Sensors
L.
The camera shall have line-lock capability when powered by AC to synchronize the
camera to the power line zero crossing for roll-free vertical interval switching. For
vertical synchronization in multiphase power installations, the camera shall provide
0 to 358° of continuously adjustable vertical phase delay. Crystal-lock shall be
selected when DC voltage is supplied or the line-lock function is switched off.
M. The manufacturer of the specified dome camera shall offer a BNC to UTP
(unshielded twisted pair) adapter as an optional accessory to allow connection to a
UTP transmitter.
N. The camera setups and adjustments shall be made using an on-screen display in
conjunction with push button keys. A miniature 2.5 mm jack socket provides a
composite video output at the camera to allow connection of a CCTV video monitor
to be used for camera setup. An optional cable [Bosch S1460] shall be available
from the camera manufacturer for making this connection to a setup monitor.
O. The manufacturer of the specified dome camera shall provide an adjustment cap for
the lens to be used during setup to ensure that the image sharpness (focus) and the
field of view remain the same when the setup is complete and the dome bubble is
installed.
P.
Color Dome Camera Components:
1. The specified product shall consist of the following components:
a. A camera module and mounting base.
b. An inner liner to disguise the viewing position of the lens.
c. A clear polycarbonate dome bubble with a UV blocking anti-scratch
coating.
d. An aluminum trim ring with tamper resistant screws.
Q. Mounting and Viewing Adjustment Requirements
1. The manufacturer of the specified color dome camera shall provide optional
hardware to allow the camera to be surface mounted, wall mounted, interior
corner mounted, pendant pipe mounted, and suspended ceiling mounted. The
camera shall be designed to be mounted to a standard 4S electrical box.
2. The dome camera shall provide cable entry via a side conduit opening or
through mounting surface cutouts.
3. The camera viewing position shall be adjustable along three (axes) providing an
adjustment range of 360° pan, 90° tilt, and ±90° azimuth.
Project Name/Project #/2-15-16
28 23 29 - 6
Video Surveillance Remote
Devices and Sensors
R. Electrical Specifications
1. Rated Voltage: 12 VDC or 24 VAC, 50/60 Hz.
2. Voltage Range: 10.8 to 39 VDC or 12 to 28 VAC, 45 to 65 Hz.
3. Power Consumption: 4 W (6 W with heater operating).
4. Imager: Interline transfer CCD, 1/3-inch image format.
5. Active Picture Elements:
a. PAL: 752 H x 582 V.
b. NTSC: 768 H x 494 V.
6. Sensitivity 3200K:
a. Usable picture (30 IRE):
1) VDC-485V03:
a) Color: 0.16 lx (0.015 fc)
b) Color+ 10x SensUp: 0.016 lx (0.0015 fc)
c) NightSense: 0.056 lx (0.0052 fc)
d) NightSense+ 10x SensUp: 0.0056 lx (0.00052 fc)
2) VDC-485V04:
a) Color: 0.4 lx (0.037 fc)
b) Color+ 10x SensUp: 0.04 lx (0.0037 fc)
c) NightSense: 0.14 lx (0.013 fc)
d) NightSense+ 10x SensUp: 0.014 lx (0.0013 fc)
3) VDC-485V09:
a) Color: 0.28 lx (0.027 fc)
b) Color+ 10x SensUp: 0.028 lx (0.0027 fc)
c) NightSense: 0.099 lx (0.0092 fc)
d) NightSense+ 10x SensUp: 0.0099 lx (0.00092 fc)
b. Usable picture (50 IRE)
1) VDC-485V03:
a) Color: 0.35 lx (0.033 fc)
b) Color+ 10x SensUp: 0.035 lx (0.0033 fc)
c) NightSense: 0.13 lx (0.012 fc)
d) NightSense+ 10x SensUp: 0.013 lx (0.0012 fc)
2) VDC-485V04:
a) Color: 0.9 lx (0.083 fc)
b) Color+ 10x SensUp: 0.09 lx (0.0083 fc)
c) NightSense: 0.32 lx (0.03 fc)
d) NightSense+ 10x SensUp: 0.032 lx (0.003 fc)
3) VDC-485V09:
a) Color: 0.62 lx (0.058 fc)
b) Color+ 10x SensUp: 0.062 lx (0.0058 fc)
c) NightSense: 0.23 lx (0.021 fc)
d) NightSense+ 10x SensUp: 0.023 lx (0.0021 fc)
Project Name/Project #/2-15-16
28 23 29 - 7
Video Surveillance Remote
Devices and Sensors
c.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Full video (100 IRE)
1) VDC-485V03:
a) Color: 0.14 lx (0.13 fc)
b) Color+ 10x SensUp: 014 lx (0.013 fc)
c) NightSense: 0.5 lx (0.046 fc)
d) NightSense+ 10x SensUp: 0.05 lx (0.0046 fc)
2) VDC-485V04:
a) Color: 3.6 lx (0.33 fc)
b) Color+ 10x SensUp: 0.36 lx (0.033 fc)
c) NightSense: 1.3 (0.12 fc)
d) NightSense+ 10x SensUp: 0.13 lx (0.012 fc)
3) VDC-485V09:
a) Color: 2.48 lx (0.23 fc)
b) Color+ 10x SensUp: 0.248 lx (0.23 fc)
c) NightSense: 0.88 lx (0.081 fc)
d) NightSense+ 10x SensUp: 0.088 lx (0.0081 fc)
Horizontal Resolution: 540 TVL.
Video S/N: >50 dB.
Automatic Gain Control: 28 dB maximum
Auto Black: On/Off Selectable.
Electronic shutter: Flickerless.
[NightSense (XF): Auto, Forced, Off Selectable.]
[Day/Night (DN): Auto, Monochrome, Color Selectable.]
Dynamic Range: 32x Dynamic Range Enhancement.
Dynamic Noise Reduction: Automatic, Off, Selectable.
Sharpness Correction: Horizontal and Vertical, Symmetrical.
Backlight Compensation: Off, Programmable Window and Level Selectable.
White Balance: Automatic Sensing (2500 to 9000 K), AWB Hold, Manual.
Video Output: Composite Video 1.0 Vp-p, 75 Ohm
Synchronization: Internal or Line Lock
Connector: Flying Leads
S.
Optical Specifications
1. Varifocal: Manual Zoom and Focus Adjustment.
2. Automatic Iris Control.
3. Viewing Angle:
a. 3 to 9.5 mm: Wide 95 x 69 degrees (H x V), Tele 30.2 x 22.6 degrees.
b. 3.7 to 12 mm: Wide 76.1 x 55.8 degrees (H x V), Tele 23.8 x 17.9 degrees.
c. 9 to 22 mm: Wide: 31.2 x 22.8 degrees (H x V), Tele: 12.8 x 9.6 degrees.
T.
Mechanical specifications
1. Weight: Approx. 740 g (1.63 lb).
2. Color: white (RAL 9010), black inner liner.
3. Material:
a. Bubble: Polycarbonate, clear UV-blocking, anti-scratch coating.
b. Trim Ring: Aluminum.
4. Mounting: Flush on hollow surface.
Project Name/Project #/2-15-16
28 23 29 - 8
Video Surveillance Remote
Devices and Sensors
U. Environmental specifications
a. Operating Temperature: -50° to +50°C (-58° to +122°F), with heater on.
b. Storage Temperature: -40° to +70°C (-40° to +158°F).
c. Humidity: 5% to 93% relative humidity.
d. Impact Protection:
1) IEC 60068-2-75 test Eh, 50 J
2) EN 50102, exceeding IK 10
V.
Accessories
1. Lenses
a. VDC-485V03-10, PAL, 3 to 9.5 mm F1.0 lens.
b. VDC-485V03-20, NTSC, 3 to 9.5 mm F1.0 lens.
c. VDC-485V04-10, PAL, 3.7 to 12 mm F1.6 lens.
d. VDC-485V04-20, NTSC, 3.7 to 12 mm F1.6 lens.
e. VDC-485V09-10, PAL, 9 to 22 mm F1.4 lens.
f. VDC-485V09-20, NTSC, 9 to 22 mm F1.4 lens.
2. Mounts
a. VDA-455PMT Pendant Mount for FlexiDome Series.
b. VDA-445WMT Wall Mount for FlexiDome Series.
c. VDA-455CMT Corner Mount for FlexiDome Series.
d. VDA-455SMB Surface Mount Box
PART 3 – EXECUTION
3.1
EXAMINATION
A.
Examine areas to receive devices and notify adverse conditions affecting installation
or subsequent operation.
B.
Do not begin installation until unacceptable conditions are corrected.
C. Ensure all parts are included in package.
3.2
3.3
PREPARATION
A.
Protect devices from damage during construction.
B.
Ensure operating temperature and humidity are within range accepted and
recommended by manufacturer.
INSTALLATION
A.
Install devices in accordance with manufacturer’s instruction at locations indicated
on the floor drawings plans.
B.
Ensure selected location is secure and offers protection from accidental damage.
C. Location must provide reasonable temperature and humidity conditions, free from
sources of electrical and electromagnetic interference.
Project Name/Project #/2-15-16
28 23 29 - 9
Video Surveillance Remote
Devices and Sensors
3.4
3.5
3.6
FIELD QUALITY CONTROL
A.
Test snugness of mounting screws of all installed equipment.
B.
Test proper operation of all video system devices.
C. Determine and report all problems to the manufacturer’s customer service
department.
ADJUSTING
A.
Make proper adjustment to video system devices for correct operation in
accordance with manufacturer’s instructions.
B.
Make any adjustment of camera settings to comply with specific customer’s need.
DEMONSTRATION
A.
Demonstrate at final inspection that video management system and devices function
properly.
B.
Demonstrate at final inspection camera’s functionality and video recording
capabilities.
END OF SECTION
Project Name/Project #/2-15-16
28 23 29 - 10
Video Surveillance Remote
Devices and Sensors