BIS CODE : INDIAN STANDARD for Structural Engineering
IS: 800-1984
Code for practice for general
construction in steel.
SP6 (1)
Handbook for structural steel
sections.
SP:6(5)-1980
Hand book for Cold formed, Light
Gauge steel structures.
SP:6(6)-1972
Handbook for application of
plastic theory in design of steel
structures.
SP:6(4)-1969
Project & Construction
Management for Large Industrial
Projects.
IS: 206 -1992 (4th Rev)
Tee & strap hinges - Specification.
IS: 459 -1992 (3rd Rev)
Corrugated & non-corrugated
asbestos cement sheets Specification.
IS: 730 -1978 (2nd Rev)
Hook bolts for corrugated sheet
roofing - Specification.
IS: 801 -1975 (1st Rev)
Code of Practice for use of cold formed light gauge steel structural
members in general building
construction.
IS: 802 -1977 (2nd Rev)
Code of Practice for use of structural
steel in (Part-1) overhead
transmission line towers - Loads
and permissible stresses.
IS: 804 -1967 (1st Rev)
Rectangular pressed steel tanks Specification.
IS: 806 -1968 (1st Rev)
Code of Practice for use of steel
tubes in general building
construction.
IS: 808 -1989 (3rd Rev)
Dimension for hot rolled steel beam,
channel and angle sections.
IS: 811 -1987 (2nd Rev)
Cold formed light gauge structural
steel section - Specification.
IS:813 -1986 (1st Rev)
Scheme of symbols for welding.
IS: 814 -1991 (5th Rev)
Specification for covered electrodes
for manual metal arc welding of
carbon & carbon manganese steel.
IS: 822 -1970
Code of procedure for inspection of
welds.
IS: 875 -1987(2nd Rev)
Code of Practice for design loads for
buildings & structures.
(Part 1)
Dead loads
(Part 2)
Imposed loads.
(Part 3)
Wind loads.
(Part 4)
Snow loads.
(Part 5)
Special loads & load combinations.
IS:1024 -1979 (1st Rev)
Code of Practice for use of welding
in bridges and structures subjected
to dynamic loading.
IS:1038 -1983 (3rd Rev)
Specification for steel doors,
windows & ventilators.
IS:1081 -1960
Code of Practice for fixing & glazing
of metal doors, windows and
ventilators.
IS:1148 -1982 (3rd Rev)
Specification for hot rolled steel
rivet bars (Up to 40 mm diameter).
IS:1161 -1979 (3rd Rev)
Specification for steel tubes for
structural purposes.
IS:1182 -1983 (2nd Rev)
Recommended practice for
radiographic examination of fusion
welded butt joints in steel plates.
IS:1254 -1991 (3rd Rev)
Specification - Corrugated
aluminium sheet.
IS:1323 -1982 (2nd Rev)
Code of Practice for oxyacetylene
welding for structural work in in
mild steel.
IS:1361 -1978 (1st Rev)
Specification for steel windows for
industrial buildings.
IS:1363 -1992 (3rd Rev)
(Parts 2 & 3)
Hexagon head bolts, screw and nuts
of product grade C-Screw (M5 to
M64)
IS:1364 -1992 (3rd Rev)
(Part 4)
Hexagon head bolts, screws and nuts
of product grade A and B - Thin nuts
(M1.6 to M64)
IS:1395 -1982(3rd Rev)
Specification for low & medium
alloy steel covered electrode for
metal arc welding.
IS:1477 -1971(1st Rev)
Code of Practice for painting
offerrous metal in buildings.
(Part 1)
Pretreatment
(Part 2)
Painting
. IS:2062 -1992 (4th Rev)
Specification for steel for general
structural purposes.
IS:3443 -1980(1st Rev)
Specification for crane rail section
IS:3548 -1988(1st Rev)
Code of Practice for glazing in
buildings.
IS:3600
Part 1 -1985
Part 3 -1984
Part 4 -1984
Part 5 -1983
Part 6 -1983
Part 7 -1985
Part 8 -1985
Method of testing fusion welded
joints and weld metal in steel.
IS:3757 -1985(2nd Rev)
Specification for high strength
structural bolts.
IS:3964 -1980(1st Rev)
Specification for light rails.
IS:4000 -1992 (1st Rev)
High strength bolts in steel
structures.
IS:4049 -1988 (2nd Rev) (Part 1)
Specification for formed ends for
tanks and pressure vessels.
IS:4260 -1986(2nd Rev)
Recommended practice for
ultrasonic testing of butt welds in
ferritic steel.
IS:4351 -1976(1st Rev)
Specification for steel door frames.
IS:5504 -1969
Specification for spiral welded
pipes.
IS:5872 -1990(2nd Rev)
Specification for cold rolled steel
strips.
IS:6533 -1989(1st Rev)
Code of Practice for design and
construction of steel chimney.
(Part 1)
Mechanical aspect
(Part 2)
Structural aspect
IS:6623 -1985(1st Rev)
Specification for high strength
structural nuts.
IS:6649 -1985(1st Rev)
Specification for hardened and
tempered washers for high strength
structural bolts and nuts.
IS:7205 -1974
Safety code for erection of
structural steelwork.
. IS:7215 -1974
Tolerances for fabrication of steel
structures.
IS:8500 -1991(1st Rev)
Specification for micro-alloyed
structural steel.
IS:8629 -1977 Part (1 & 3)
Code of Practice for protection of
iron and steel structures from
atmospheric corrosion.
IS:9172 -1979
Recommended design practice for
corrosion prevention of steel
structures.
IS:9178 -1979
Criteria for design of steel bins
for storage of bulk materials.
(Part 1)
(Part 2)
General requirements & assessment
of loads.
Design criteria.
IS:9417 -1989 (1st rev)
Welding of cold rolled steel
bars for reinforcement concrete
construction.
IS:12040-1987
Guidelines for development of
vendor rating systems.
IS:12843-1989
Tolerances for erection of steel
structures.
Free Engineering Services by IIT Alumni Ranchi Chapter